| /* |
| * Copyright (C) 2013 Red Hat |
| * Author: Rob Clark <robdclark@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published by |
| * the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| * You should have received a copy of the GNU General Public License along with |
| * this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifdef CONFIG_MSM_OCMEM |
| # include <mach/ocmem.h> |
| #endif |
| |
| #include "a3xx_gpu.h" |
| |
| #define A3XX_INT0_MASK \ |
| (A3XX_INT0_RBBM_AHB_ERROR | \ |
| A3XX_INT0_RBBM_ATB_BUS_OVERFLOW | \ |
| A3XX_INT0_CP_T0_PACKET_IN_IB | \ |
| A3XX_INT0_CP_OPCODE_ERROR | \ |
| A3XX_INT0_CP_RESERVED_BIT_ERROR | \ |
| A3XX_INT0_CP_HW_FAULT | \ |
| A3XX_INT0_CP_IB1_INT | \ |
| A3XX_INT0_CP_IB2_INT | \ |
| A3XX_INT0_CP_RB_INT | \ |
| A3XX_INT0_CP_REG_PROTECT_FAULT | \ |
| A3XX_INT0_CP_AHB_ERROR_HALT | \ |
| A3XX_INT0_UCHE_OOB_ACCESS) |
| |
| |
| static bool hang_debug = false; |
| MODULE_PARM_DESC(hang_debug, "Dump registers when hang is detected (can be slow!)"); |
| module_param_named(hang_debug, hang_debug, bool, 0600); |
| static void a3xx_dump(struct msm_gpu *gpu); |
| |
| static struct platform_device *a3xx_pdev; |
| |
| static void a3xx_me_init(struct msm_gpu *gpu) |
| { |
| struct msm_ringbuffer *ring = gpu->rb; |
| |
| OUT_PKT3(ring, CP_ME_INIT, 17); |
| OUT_RING(ring, 0x000003f7); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000080); |
| OUT_RING(ring, 0x00000100); |
| OUT_RING(ring, 0x00000180); |
| OUT_RING(ring, 0x00006600); |
| OUT_RING(ring, 0x00000150); |
| OUT_RING(ring, 0x0000014e); |
| OUT_RING(ring, 0x00000154); |
| OUT_RING(ring, 0x00000001); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000000); |
| OUT_RING(ring, 0x00000000); |
| |
| gpu->funcs->flush(gpu); |
| gpu->funcs->idle(gpu); |
| } |
| |
| static int a3xx_hw_init(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| struct a3xx_gpu *a3xx_gpu = to_a3xx_gpu(adreno_gpu); |
| uint32_t *ptr, len; |
| int i, ret; |
| |
| DBG("%s", gpu->name); |
| |
| if (adreno_is_a305(adreno_gpu)) { |
| /* Set up 16 deep read/write request queues: */ |
| gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF1, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_RD_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_WR_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_DDR_OUT_MAX_BURST, 0x0000303); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF1, 0x10101010); |
| /* Enable WR-REQ: */ |
| gpu_write(gpu, REG_A3XX_VBIF_GATE_OFF_WRREQ_EN, 0x0000ff); |
| /* Set up round robin arbitration between both AXI ports: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ARB_CTL, 0x00000030); |
| /* Set up AOOO: */ |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO_EN, 0x0000003c); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO, 0x003c003c); |
| |
| } else if (adreno_is_a320(adreno_gpu)) { |
| /* Set up 16 deep read/write request queues: */ |
| gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF1, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_RD_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_WR_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_DDR_OUT_MAX_BURST, 0x0000303); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF0, 0x10101010); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF1, 0x10101010); |
| /* Enable WR-REQ: */ |
| gpu_write(gpu, REG_A3XX_VBIF_GATE_OFF_WRREQ_EN, 0x0000ff); |
| /* Set up round robin arbitration between both AXI ports: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ARB_CTL, 0x00000030); |
| /* Set up AOOO: */ |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO_EN, 0x0000003c); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO, 0x003c003c); |
| /* Enable 1K sort: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ABIT_SORT, 0x000000ff); |
| gpu_write(gpu, REG_A3XX_VBIF_ABIT_SORT_CONF, 0x000000a4); |
| |
| } else if (adreno_is_a330v2(adreno_gpu)) { |
| /* |
| * Most of the VBIF registers on 8974v2 have the correct |
| * values at power on, so we won't modify those if we don't |
| * need to |
| */ |
| /* Enable 1k sort: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ABIT_SORT, 0x0001003f); |
| gpu_write(gpu, REG_A3XX_VBIF_ABIT_SORT_CONF, 0x000000a4); |
| /* Enable WR-REQ: */ |
| gpu_write(gpu, REG_A3XX_VBIF_GATE_OFF_WRREQ_EN, 0x00003f); |
| gpu_write(gpu, REG_A3XX_VBIF_DDR_OUT_MAX_BURST, 0x0000303); |
| /* Set up VBIF_ROUND_ROBIN_QOS_ARB: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ROUND_ROBIN_QOS_ARB, 0x0003); |
| |
| } else if (adreno_is_a330(adreno_gpu)) { |
| /* Set up 16 deep read/write request queues: */ |
| gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF0, 0x18181818); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_RD_LIM_CONF1, 0x18181818); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_RD_LIM_CONF0, 0x18181818); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_WR_LIM_CONF0, 0x18181818); |
| gpu_write(gpu, REG_A3XX_VBIF_DDR_OUT_MAX_BURST, 0x0000303); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF0, 0x18181818); |
| gpu_write(gpu, REG_A3XX_VBIF_IN_WR_LIM_CONF1, 0x18181818); |
| /* Enable WR-REQ: */ |
| gpu_write(gpu, REG_A3XX_VBIF_GATE_OFF_WRREQ_EN, 0x00003f); |
| /* Set up round robin arbitration between both AXI ports: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ARB_CTL, 0x00000030); |
| /* Set up VBIF_ROUND_ROBIN_QOS_ARB: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ROUND_ROBIN_QOS_ARB, 0x0001); |
| /* Set up AOOO: */ |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO_EN, 0x0000003f); |
| gpu_write(gpu, REG_A3XX_VBIF_OUT_AXI_AOOO, 0x003f003f); |
| /* Enable 1K sort: */ |
| gpu_write(gpu, REG_A3XX_VBIF_ABIT_SORT, 0x0001003f); |
| gpu_write(gpu, REG_A3XX_VBIF_ABIT_SORT_CONF, 0x000000a4); |
| /* Disable VBIF clock gating. This is to enable AXI running |
| * higher frequency than GPU: |
| */ |
| gpu_write(gpu, REG_A3XX_VBIF_CLKON, 0x00000001); |
| |
| } else { |
| BUG(); |
| } |
| |
| /* Make all blocks contribute to the GPU BUSY perf counter: */ |
| gpu_write(gpu, REG_A3XX_RBBM_GPU_BUSY_MASKED, 0xffffffff); |
| |
| /* Tune the hystersis counters for SP and CP idle detection: */ |
| gpu_write(gpu, REG_A3XX_RBBM_SP_HYST_CNT, 0x10); |
| gpu_write(gpu, REG_A3XX_RBBM_WAIT_IDLE_CLOCKS_CTL, 0x10); |
| |
| /* Enable the RBBM error reporting bits. This lets us get |
| * useful information on failure: |
| */ |
| gpu_write(gpu, REG_A3XX_RBBM_AHB_CTL0, 0x00000001); |
| |
| /* Enable AHB error reporting: */ |
| gpu_write(gpu, REG_A3XX_RBBM_AHB_CTL1, 0xa6ffffff); |
| |
| /* Turn on the power counters: */ |
| gpu_write(gpu, REG_A3XX_RBBM_RBBM_CTL, 0x00030000); |
| |
| /* Turn on hang detection - this spews a lot of useful information |
| * into the RBBM registers on a hang: |
| */ |
| gpu_write(gpu, REG_A3XX_RBBM_INTERFACE_HANG_INT_CTL, 0x00010fff); |
| |
| /* Enable 64-byte cacheline size. HW Default is 32-byte (0x000000E0): */ |
| gpu_write(gpu, REG_A3XX_UCHE_CACHE_MODE_CONTROL_REG, 0x00000001); |
| |
| /* Enable Clock gating: */ |
| if (adreno_is_a320(adreno_gpu)) |
| gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xbfffffff); |
| else if (adreno_is_a330v2(adreno_gpu)) |
| gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xaaaaaaaa); |
| else if (adreno_is_a330(adreno_gpu)) |
| gpu_write(gpu, REG_A3XX_RBBM_CLOCK_CTL, 0xbffcffff); |
| |
| if (adreno_is_a330v2(adreno_gpu)) |
| gpu_write(gpu, REG_A3XX_RBBM_GPR0_CTL, 0x05515455); |
| else if (adreno_is_a330(adreno_gpu)) |
| gpu_write(gpu, REG_A3XX_RBBM_GPR0_CTL, 0x00000000); |
| |
| /* Set the OCMEM base address for A330, etc */ |
| if (a3xx_gpu->ocmem_hdl) { |
| gpu_write(gpu, REG_A3XX_RB_GMEM_BASE_ADDR, |
| (unsigned int)(a3xx_gpu->ocmem_base >> 14)); |
| } |
| |
| /* Turn on performance counters: */ |
| gpu_write(gpu, REG_A3XX_RBBM_PERFCTR_CTL, 0x01); |
| |
| /* Set SP perfcounter 7 to count SP_FS_FULL_ALU_INSTRUCTIONS |
| * we will use this to augment our hang detection: |
| */ |
| gpu_write(gpu, REG_A3XX_SP_PERFCOUNTER7_SELECT, |
| SP_FS_FULL_ALU_INSTRUCTIONS); |
| |
| gpu_write(gpu, REG_A3XX_RBBM_INT_0_MASK, A3XX_INT0_MASK); |
| |
| ret = adreno_hw_init(gpu); |
| if (ret) |
| return ret; |
| |
| /* setup access protection: */ |
| gpu_write(gpu, REG_A3XX_CP_PROTECT_CTRL, 0x00000007); |
| |
| /* RBBM registers */ |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(0), 0x63000040); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(1), 0x62000080); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(2), 0x600000cc); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(3), 0x60000108); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(4), 0x64000140); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(5), 0x66000400); |
| |
| /* CP registers */ |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(6), 0x65000700); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(7), 0x610007d8); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(8), 0x620007e0); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(9), 0x61001178); |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(10), 0x64001180); |
| |
| /* RB registers */ |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(11), 0x60003300); |
| |
| /* VBIF registers */ |
| gpu_write(gpu, REG_A3XX_CP_PROTECT(12), 0x6b00c000); |
| |
| /* NOTE: PM4/micro-engine firmware registers look to be the same |
| * for a2xx and a3xx.. we could possibly push that part down to |
| * adreno_gpu base class. Or push both PM4 and PFP but |
| * parameterize the pfp ucode addr/data registers.. |
| */ |
| |
| /* Load PM4: */ |
| ptr = (uint32_t *)(adreno_gpu->pm4->data); |
| len = adreno_gpu->pm4->size / 4; |
| DBG("loading PM4 ucode version: %x", ptr[1]); |
| |
| gpu_write(gpu, REG_AXXX_CP_DEBUG, |
| AXXX_CP_DEBUG_DYNAMIC_CLK_DISABLE | |
| AXXX_CP_DEBUG_MIU_128BIT_WRITE_ENABLE); |
| gpu_write(gpu, REG_AXXX_CP_ME_RAM_WADDR, 0); |
| for (i = 1; i < len; i++) |
| gpu_write(gpu, REG_AXXX_CP_ME_RAM_DATA, ptr[i]); |
| |
| /* Load PFP: */ |
| ptr = (uint32_t *)(adreno_gpu->pfp->data); |
| len = adreno_gpu->pfp->size / 4; |
| DBG("loading PFP ucode version: %x", ptr[5]); |
| |
| gpu_write(gpu, REG_A3XX_CP_PFP_UCODE_ADDR, 0); |
| for (i = 1; i < len; i++) |
| gpu_write(gpu, REG_A3XX_CP_PFP_UCODE_DATA, ptr[i]); |
| |
| /* CP ROQ queue sizes (bytes) - RB:16, ST:16, IB1:32, IB2:64 */ |
| if (adreno_is_a305(adreno_gpu) || adreno_is_a320(adreno_gpu)) { |
| gpu_write(gpu, REG_AXXX_CP_QUEUE_THRESHOLDS, |
| AXXX_CP_QUEUE_THRESHOLDS_CSQ_IB1_START(2) | |
| AXXX_CP_QUEUE_THRESHOLDS_CSQ_IB2_START(6) | |
| AXXX_CP_QUEUE_THRESHOLDS_CSQ_ST_START(14)); |
| } else if (adreno_is_a330(adreno_gpu)) { |
| /* NOTE: this (value take from downstream android driver) |
| * includes some bits outside of the known bitfields. But |
| * A330 has this "MERCIU queue" thing too, which might |
| * explain a new bitfield or reshuffling: |
| */ |
| gpu_write(gpu, REG_AXXX_CP_QUEUE_THRESHOLDS, 0x003e2008); |
| } |
| |
| /* clear ME_HALT to start micro engine */ |
| gpu_write(gpu, REG_AXXX_CP_ME_CNTL, 0); |
| |
| a3xx_me_init(gpu); |
| |
| return 0; |
| } |
| |
| static void a3xx_recover(struct msm_gpu *gpu) |
| { |
| /* dump registers before resetting gpu, if enabled: */ |
| if (hang_debug) |
| a3xx_dump(gpu); |
| gpu_write(gpu, REG_A3XX_RBBM_SW_RESET_CMD, 1); |
| gpu_read(gpu, REG_A3XX_RBBM_SW_RESET_CMD); |
| gpu_write(gpu, REG_A3XX_RBBM_SW_RESET_CMD, 0); |
| adreno_recover(gpu); |
| } |
| |
| static void a3xx_destroy(struct msm_gpu *gpu) |
| { |
| struct adreno_gpu *adreno_gpu = to_adreno_gpu(gpu); |
| struct a3xx_gpu *a3xx_gpu = to_a3xx_gpu(adreno_gpu); |
| |
| DBG("%s", gpu->name); |
| |
| adreno_gpu_cleanup(adreno_gpu); |
| |
| #ifdef CONFIG_MSM_OCMEM |
| if (a3xx_gpu->ocmem_base) |
| ocmem_free(OCMEM_GRAPHICS, a3xx_gpu->ocmem_hdl); |
| #endif |
| |
| put_device(&a3xx_gpu->pdev->dev); |
| kfree(a3xx_gpu); |
| } |
| |
| static void a3xx_idle(struct msm_gpu *gpu) |
| { |
| /* wait for ringbuffer to drain: */ |
| adreno_idle(gpu); |
| |
| /* then wait for GPU to finish: */ |
| if (spin_until(!(gpu_read(gpu, REG_A3XX_RBBM_STATUS) & |
| A3XX_RBBM_STATUS_GPU_BUSY))) |
| DRM_ERROR("%s: timeout waiting for GPU to idle!\n", gpu->name); |
| |
| /* TODO maybe we need to reset GPU here to recover from hang? */ |
| } |
| |
| static irqreturn_t a3xx_irq(struct msm_gpu *gpu) |
| { |
| uint32_t status; |
| |
| status = gpu_read(gpu, REG_A3XX_RBBM_INT_0_STATUS); |
| DBG("%s: %08x", gpu->name, status); |
| |
| // TODO |
| |
| gpu_write(gpu, REG_A3XX_RBBM_INT_CLEAR_CMD, status); |
| |
| msm_gpu_retire(gpu); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static const unsigned int a3xx_registers[] = { |
| 0x0000, 0x0002, 0x0010, 0x0012, 0x0018, 0x0018, 0x0020, 0x0027, |
| 0x0029, 0x002b, 0x002e, 0x0033, 0x0040, 0x0042, 0x0050, 0x005c, |
| 0x0060, 0x006c, 0x0080, 0x0082, 0x0084, 0x0088, 0x0090, 0x00e5, |
| 0x00ea, 0x00ed, 0x0100, 0x0100, 0x0110, 0x0123, 0x01c0, 0x01c1, |
| 0x01c3, 0x01c5, 0x01c7, 0x01c7, 0x01d5, 0x01d9, 0x01dc, 0x01dd, |
| 0x01ea, 0x01ea, 0x01ee, 0x01f1, 0x01f5, 0x01f5, 0x01fc, 0x01ff, |
| 0x0440, 0x0440, 0x0443, 0x0443, 0x0445, 0x0445, 0x044d, 0x044f, |
| 0x0452, 0x0452, 0x0454, 0x046f, 0x047c, 0x047c, 0x047f, 0x047f, |
| 0x0578, 0x057f, 0x0600, 0x0602, 0x0605, 0x0607, 0x060a, 0x060e, |
| 0x0612, 0x0614, 0x0c01, 0x0c02, 0x0c06, 0x0c1d, 0x0c3d, 0x0c3f, |
| 0x0c48, 0x0c4b, 0x0c80, 0x0c80, 0x0c88, 0x0c8b, 0x0ca0, 0x0cb7, |
| 0x0cc0, 0x0cc1, 0x0cc6, 0x0cc7, 0x0ce4, 0x0ce5, 0x0e00, 0x0e05, |
| 0x0e0c, 0x0e0c, 0x0e22, 0x0e23, 0x0e41, 0x0e45, 0x0e64, 0x0e65, |
| 0x0e80, 0x0e82, 0x0e84, 0x0e89, 0x0ea0, 0x0ea1, 0x0ea4, 0x0ea7, |
| 0x0ec4, 0x0ecb, 0x0ee0, 0x0ee0, 0x0f00, 0x0f01, 0x0f03, 0x0f09, |
| 0x2040, 0x2040, 0x2044, 0x2044, 0x2048, 0x204d, 0x2068, 0x2069, |
| 0x206c, 0x206d, 0x2070, 0x2070, 0x2072, 0x2072, 0x2074, 0x2075, |
| 0x2079, 0x207a, 0x20c0, 0x20d3, 0x20e4, 0x20ef, 0x2100, 0x2109, |
| 0x210c, 0x210c, 0x210e, 0x210e, 0x2110, 0x2111, 0x2114, 0x2115, |
| 0x21e4, 0x21e4, 0x21ea, 0x21ea, 0x21ec, 0x21ed, 0x21f0, 0x21f0, |
| 0x2200, 0x2212, 0x2214, 0x2217, 0x221a, 0x221a, 0x2240, 0x227e, |
| 0x2280, 0x228b, 0x22c0, 0x22c0, 0x22c4, 0x22ce, 0x22d0, 0x22d8, |
| 0x22df, 0x22e6, 0x22e8, 0x22e9, 0x22ec, 0x22ec, 0x22f0, 0x22f7, |
| 0x22ff, 0x22ff, 0x2340, 0x2343, 0x2348, 0x2349, 0x2350, 0x2356, |
| 0x2360, 0x2360, 0x2440, 0x2440, 0x2444, 0x2444, 0x2448, 0x244d, |
| 0x2468, 0x2469, 0x246c, 0x246d, 0x2470, 0x2470, 0x2472, 0x2472, |
| 0x2474, 0x2475, 0x2479, 0x247a, 0x24c0, 0x24d3, 0x24e4, 0x24ef, |
| 0x2500, 0x2509, 0x250c, 0x250c, 0x250e, 0x250e, 0x2510, 0x2511, |
| 0x2514, 0x2515, 0x25e4, 0x25e4, 0x25ea, 0x25ea, 0x25ec, 0x25ed, |
| 0x25f0, 0x25f0, 0x2600, 0x2612, 0x2614, 0x2617, 0x261a, 0x261a, |
| 0x2640, 0x267e, 0x2680, 0x268b, 0x26c0, 0x26c0, 0x26c4, 0x26ce, |
| 0x26d0, 0x26d8, 0x26df, 0x26e6, 0x26e8, 0x26e9, 0x26ec, 0x26ec, |
| 0x26f0, 0x26f7, 0x26ff, 0x26ff, 0x2740, 0x2743, 0x2748, 0x2749, |
| 0x2750, 0x2756, 0x2760, 0x2760, 0x300c, 0x300e, 0x301c, 0x301d, |
| 0x302a, 0x302a, 0x302c, 0x302d, 0x3030, 0x3031, 0x3034, 0x3036, |
| 0x303c, 0x303c, 0x305e, 0x305f, |
| }; |
| |
| #ifdef CONFIG_DEBUG_FS |
| static void a3xx_show(struct msm_gpu *gpu, struct seq_file *m) |
| { |
| int i; |
| |
| adreno_show(gpu, m); |
| seq_printf(m, "status: %08x\n", |
| gpu_read(gpu, REG_A3XX_RBBM_STATUS)); |
| |
| /* dump these out in a form that can be parsed by demsm: */ |
| seq_printf(m, "IO:region %s 00000000 00020000\n", gpu->name); |
| for (i = 0; i < ARRAY_SIZE(a3xx_registers); i += 2) { |
| uint32_t start = a3xx_registers[i]; |
| uint32_t end = a3xx_registers[i+1]; |
| uint32_t addr; |
| |
| for (addr = start; addr <= end; addr++) { |
| uint32_t val = gpu_read(gpu, addr); |
| seq_printf(m, "IO:R %08x %08x\n", addr<<2, val); |
| } |
| } |
| } |
| #endif |
| |
| /* would be nice to not have to duplicate the _show() stuff with printk(): */ |
| static void a3xx_dump(struct msm_gpu *gpu) |
| { |
| int i; |
| |
| adreno_dump(gpu); |
| printk("status: %08x\n", |
| gpu_read(gpu, REG_A3XX_RBBM_STATUS)); |
| |
| /* dump these out in a form that can be parsed by demsm: */ |
| printk("IO:region %s 00000000 00020000\n", gpu->name); |
| for (i = 0; i < ARRAY_SIZE(a3xx_registers); i += 2) { |
| uint32_t start = a3xx_registers[i]; |
| uint32_t end = a3xx_registers[i+1]; |
| uint32_t addr; |
| |
| for (addr = start; addr <= end; addr++) { |
| uint32_t val = gpu_read(gpu, addr); |
| printk("IO:R %08x %08x\n", addr<<2, val); |
| } |
| } |
| } |
| |
| static const struct adreno_gpu_funcs funcs = { |
| .base = { |
| .get_param = adreno_get_param, |
| .hw_init = a3xx_hw_init, |
| .pm_suspend = msm_gpu_pm_suspend, |
| .pm_resume = msm_gpu_pm_resume, |
| .recover = a3xx_recover, |
| .last_fence = adreno_last_fence, |
| .submit = adreno_submit, |
| .flush = adreno_flush, |
| .idle = a3xx_idle, |
| .irq = a3xx_irq, |
| .destroy = a3xx_destroy, |
| #ifdef CONFIG_DEBUG_FS |
| .show = a3xx_show, |
| #endif |
| }, |
| }; |
| |
| struct msm_gpu *a3xx_gpu_init(struct drm_device *dev) |
| { |
| struct a3xx_gpu *a3xx_gpu = NULL; |
| struct adreno_gpu *adreno_gpu; |
| struct msm_gpu *gpu; |
| struct platform_device *pdev = a3xx_pdev; |
| struct adreno_platform_config *config; |
| int ret; |
| |
| if (!pdev) { |
| dev_err(dev->dev, "no a3xx device\n"); |
| ret = -ENXIO; |
| goto fail; |
| } |
| |
| config = pdev->dev.platform_data; |
| |
| a3xx_gpu = kzalloc(sizeof(*a3xx_gpu), GFP_KERNEL); |
| if (!a3xx_gpu) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| adreno_gpu = &a3xx_gpu->base; |
| gpu = &adreno_gpu->base; |
| |
| get_device(&pdev->dev); |
| a3xx_gpu->pdev = pdev; |
| |
| gpu->fast_rate = config->fast_rate; |
| gpu->slow_rate = config->slow_rate; |
| gpu->bus_freq = config->bus_freq; |
| #ifdef CONFIG_MSM_BUS_SCALING |
| gpu->bus_scale_table = config->bus_scale_table; |
| #endif |
| |
| DBG("fast_rate=%u, slow_rate=%u, bus_freq=%u", |
| gpu->fast_rate, gpu->slow_rate, gpu->bus_freq); |
| |
| ret = adreno_gpu_init(dev, pdev, adreno_gpu, &funcs, config->rev); |
| if (ret) |
| goto fail; |
| |
| /* if needed, allocate gmem: */ |
| if (adreno_is_a330(adreno_gpu)) { |
| #ifdef CONFIG_MSM_OCMEM |
| /* TODO this is different/missing upstream: */ |
| struct ocmem_buf *ocmem_hdl = |
| ocmem_allocate(OCMEM_GRAPHICS, adreno_gpu->gmem); |
| |
| a3xx_gpu->ocmem_hdl = ocmem_hdl; |
| a3xx_gpu->ocmem_base = ocmem_hdl->addr; |
| adreno_gpu->gmem = ocmem_hdl->len; |
| DBG("using %dK of OCMEM at 0x%08x", adreno_gpu->gmem / 1024, |
| a3xx_gpu->ocmem_base); |
| #endif |
| } |
| |
| if (!gpu->mmu) { |
| /* TODO we think it is possible to configure the GPU to |
| * restrict access to VRAM carveout. But the required |
| * registers are unknown. For now just bail out and |
| * limp along with just modesetting. If it turns out |
| * to not be possible to restrict access, then we must |
| * implement a cmdstream validator. |
| */ |
| dev_err(dev->dev, "No memory protection without IOMMU\n"); |
| ret = -ENXIO; |
| goto fail; |
| } |
| |
| return gpu; |
| |
| fail: |
| if (a3xx_gpu) |
| a3xx_destroy(&a3xx_gpu->base.base); |
| |
| return ERR_PTR(ret); |
| } |
| |
| /* |
| * The a3xx device: |
| */ |
| |
| #if defined(CONFIG_MSM_BUS_SCALING) && !defined(CONFIG_OF) |
| # include <mach/kgsl.h> |
| #endif |
| |
| static int a3xx_probe(struct platform_device *pdev) |
| { |
| static struct adreno_platform_config config = {}; |
| #ifdef CONFIG_OF |
| struct device_node *child, *node = pdev->dev.of_node; |
| u32 val; |
| int ret; |
| |
| ret = of_property_read_u32(node, "qcom,chipid", &val); |
| if (ret) { |
| dev_err(&pdev->dev, "could not find chipid: %d\n", ret); |
| return ret; |
| } |
| |
| config.rev = ADRENO_REV((val >> 24) & 0xff, |
| (val >> 16) & 0xff, (val >> 8) & 0xff, val & 0xff); |
| |
| /* find clock rates: */ |
| config.fast_rate = 0; |
| config.slow_rate = ~0; |
| for_each_child_of_node(node, child) { |
| if (of_device_is_compatible(child, "qcom,gpu-pwrlevels")) { |
| struct device_node *pwrlvl; |
| for_each_child_of_node(child, pwrlvl) { |
| ret = of_property_read_u32(pwrlvl, "qcom,gpu-freq", &val); |
| if (ret) { |
| dev_err(&pdev->dev, "could not find gpu-freq: %d\n", ret); |
| return ret; |
| } |
| config.fast_rate = max(config.fast_rate, val); |
| config.slow_rate = min(config.slow_rate, val); |
| } |
| } |
| } |
| |
| if (!config.fast_rate) { |
| dev_err(&pdev->dev, "could not find clk rates\n"); |
| return -ENXIO; |
| } |
| |
| #else |
| struct kgsl_device_platform_data *pdata = pdev->dev.platform_data; |
| uint32_t version = socinfo_get_version(); |
| if (cpu_is_apq8064ab()) { |
| config.fast_rate = 450000000; |
| config.slow_rate = 27000000; |
| config.bus_freq = 4; |
| config.rev = ADRENO_REV(3, 2, 1, 0); |
| } else if (cpu_is_apq8064()) { |
| config.fast_rate = 400000000; |
| config.slow_rate = 27000000; |
| config.bus_freq = 4; |
| |
| if (SOCINFO_VERSION_MAJOR(version) == 2) |
| config.rev = ADRENO_REV(3, 2, 0, 2); |
| else if ((SOCINFO_VERSION_MAJOR(version) == 1) && |
| (SOCINFO_VERSION_MINOR(version) == 1)) |
| config.rev = ADRENO_REV(3, 2, 0, 1); |
| else |
| config.rev = ADRENO_REV(3, 2, 0, 0); |
| |
| } else if (cpu_is_msm8960ab()) { |
| config.fast_rate = 400000000; |
| config.slow_rate = 320000000; |
| config.bus_freq = 4; |
| |
| if (SOCINFO_VERSION_MINOR(version) == 0) |
| config.rev = ADRENO_REV(3, 2, 1, 0); |
| else |
| config.rev = ADRENO_REV(3, 2, 1, 1); |
| |
| } else if (cpu_is_msm8930()) { |
| config.fast_rate = 400000000; |
| config.slow_rate = 27000000; |
| config.bus_freq = 3; |
| |
| if ((SOCINFO_VERSION_MAJOR(version) == 1) && |
| (SOCINFO_VERSION_MINOR(version) == 2)) |
| config.rev = ADRENO_REV(3, 0, 5, 2); |
| else |
| config.rev = ADRENO_REV(3, 0, 5, 0); |
| |
| } |
| # ifdef CONFIG_MSM_BUS_SCALING |
| config.bus_scale_table = pdata->bus_scale_table; |
| # endif |
| #endif |
| pdev->dev.platform_data = &config; |
| a3xx_pdev = pdev; |
| return 0; |
| } |
| |
| static int a3xx_remove(struct platform_device *pdev) |
| { |
| a3xx_pdev = NULL; |
| return 0; |
| } |
| |
| static const struct of_device_id dt_match[] = { |
| { .compatible = "qcom,kgsl-3d0" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, dt_match); |
| |
| static struct platform_driver a3xx_driver = { |
| .probe = a3xx_probe, |
| .remove = a3xx_remove, |
| .driver = { |
| .name = "kgsl-3d0", |
| .of_match_table = dt_match, |
| }, |
| }; |
| |
| void __init a3xx_register(void) |
| { |
| platform_driver_register(&a3xx_driver); |
| } |
| |
| void __exit a3xx_unregister(void) |
| { |
| platform_driver_unregister(&a3xx_driver); |
| } |