| /* |
| * File: drivers/video/bfin-t350mcqb-fb.c |
| * Based on: |
| * Author: Michael Hennerich <hennerich@blackfin.uclinux.org> |
| * |
| * Created: |
| * Description: Blackfin LCD Framebufer driver |
| * |
| * |
| * Modified: |
| * Copyright 2004-2007 Analog Devices Inc. |
| * |
| * Bugs: Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, see the file COPYING, or write |
| * to the Free Software Foundation, Inc., |
| * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/string.h> |
| #include <linux/gfp.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/device.h> |
| #include <linux/backlight.h> |
| #include <linux/lcd.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| |
| #include <asm/blackfin.h> |
| #include <asm/irq.h> |
| #include <asm/dma-mapping.h> |
| #include <asm/dma.h> |
| #include <asm/portmux.h> |
| #include <asm/gptimers.h> |
| |
| #define NO_BL_SUPPORT |
| |
| #define LCD_X_RES 320 /* Horizontal Resolution */ |
| #define LCD_Y_RES 240 /* Vertical Resolution */ |
| #define LCD_BPP 24 /* Bit Per Pixel */ |
| |
| #define DMA_BUS_SIZE 16 |
| #define LCD_CLK (12*1000*1000) /* 12MHz */ |
| |
| #define CLOCKS_PER_PIX 3 |
| |
| /* |
| * HS and VS timing parameters (all in number of PPI clk ticks) |
| */ |
| |
| #define U_LINE 1 /* Blanking Lines */ |
| |
| #define H_ACTPIX (LCD_X_RES * CLOCKS_PER_PIX) /* active horizontal pixel */ |
| #define H_PERIOD (408 * CLOCKS_PER_PIX) /* HS period */ |
| #define H_PULSE 90 /* HS pulse width */ |
| #define H_START 204 /* first valid pixel */ |
| |
| #define V_LINES (LCD_Y_RES + U_LINE) /* total vertical lines */ |
| #define V_PULSE (3 * H_PERIOD) /* VS pulse width (1-5 H_PERIODs) */ |
| #define V_PERIOD (H_PERIOD * V_LINES) /* VS period */ |
| |
| #define ACTIVE_VIDEO_MEM_OFFSET (U_LINE * H_ACTPIX) |
| |
| #define BFIN_LCD_NBR_PALETTE_ENTRIES 256 |
| |
| #define DRIVER_NAME "bfin-t350mcqb" |
| static char driver_name[] = DRIVER_NAME; |
| |
| struct bfin_t350mcqbfb_info { |
| struct fb_info *fb; |
| struct device *dev; |
| unsigned char *fb_buffer; /* RGB Buffer */ |
| dma_addr_t dma_handle; |
| int lq043_open_cnt; |
| int irq; |
| spinlock_t lock; /* lock */ |
| u32 pseudo_pal[16]; |
| }; |
| |
| static int nocursor; |
| module_param(nocursor, int, 0644); |
| MODULE_PARM_DESC(nocursor, "cursor enable/disable"); |
| |
| #define PPI_TX_MODE 0x2 |
| #define PPI_XFER_TYPE_11 0xC |
| #define PPI_PORT_CFG_01 0x10 |
| #define PPI_PACK_EN 0x80 |
| #define PPI_POLS_1 0x8000 |
| |
| static void bfin_t350mcqb_config_ppi(struct bfin_t350mcqbfb_info *fbi) |
| { |
| bfin_write_PPI_DELAY(H_START); |
| bfin_write_PPI_COUNT(H_ACTPIX-1); |
| bfin_write_PPI_FRAME(V_LINES); |
| |
| bfin_write_PPI_CONTROL(PPI_TX_MODE | /* output mode , PORT_DIR */ |
| PPI_XFER_TYPE_11 | /* sync mode XFR_TYPE */ |
| PPI_PORT_CFG_01 | /* two frame sync PORT_CFG */ |
| PPI_PACK_EN | /* packing enabled PACK_EN */ |
| PPI_POLS_1); /* faling edge syncs POLS */ |
| } |
| |
| static inline void bfin_t350mcqb_disable_ppi(void) |
| { |
| bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() & ~PORT_EN); |
| } |
| |
| static inline void bfin_t350mcqb_enable_ppi(void) |
| { |
| bfin_write_PPI_CONTROL(bfin_read_PPI_CONTROL() | PORT_EN); |
| } |
| |
| static void bfin_t350mcqb_start_timers(void) |
| { |
| unsigned long flags; |
| |
| local_irq_save(flags); |
| enable_gptimers(TIMER1bit); |
| enable_gptimers(TIMER0bit); |
| local_irq_restore(flags); |
| } |
| |
| static void bfin_t350mcqb_stop_timers(void) |
| { |
| disable_gptimers(TIMER0bit | TIMER1bit); |
| |
| set_gptimer_status(0, TIMER_STATUS_TRUN0 | TIMER_STATUS_TRUN1 | |
| TIMER_STATUS_TIMIL0 | TIMER_STATUS_TIMIL1 | |
| TIMER_STATUS_TOVF0 | TIMER_STATUS_TOVF1); |
| |
| } |
| |
| static void bfin_t350mcqb_init_timers(void) |
| { |
| |
| bfin_t350mcqb_stop_timers(); |
| |
| set_gptimer_period(TIMER0_id, H_PERIOD); |
| set_gptimer_pwidth(TIMER0_id, H_PULSE); |
| set_gptimer_config(TIMER0_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | |
| TIMER_TIN_SEL | TIMER_CLK_SEL| |
| TIMER_EMU_RUN); |
| |
| set_gptimer_period(TIMER1_id, V_PERIOD); |
| set_gptimer_pwidth(TIMER1_id, V_PULSE); |
| set_gptimer_config(TIMER1_id, TIMER_MODE_PWM | TIMER_PERIOD_CNT | |
| TIMER_TIN_SEL | TIMER_CLK_SEL | |
| TIMER_EMU_RUN); |
| |
| } |
| |
| static void bfin_t350mcqb_config_dma(struct bfin_t350mcqbfb_info *fbi) |
| { |
| |
| set_dma_config(CH_PPI, |
| set_bfin_dma_config(DIR_READ, DMA_FLOW_AUTO, |
| INTR_DISABLE, DIMENSION_2D, |
| DATA_SIZE_16, |
| DMA_NOSYNC_KEEP_DMA_BUF)); |
| set_dma_x_count(CH_PPI, (LCD_X_RES * LCD_BPP) / DMA_BUS_SIZE); |
| set_dma_x_modify(CH_PPI, DMA_BUS_SIZE / 8); |
| set_dma_y_count(CH_PPI, V_LINES); |
| |
| set_dma_y_modify(CH_PPI, DMA_BUS_SIZE / 8); |
| set_dma_start_addr(CH_PPI, (unsigned long)fbi->fb_buffer); |
| |
| } |
| |
| static u16 ppi0_req_8[] = {P_PPI0_CLK, P_PPI0_FS1, P_PPI0_FS2, |
| P_PPI0_D0, P_PPI0_D1, P_PPI0_D2, |
| P_PPI0_D3, P_PPI0_D4, P_PPI0_D5, |
| P_PPI0_D6, P_PPI0_D7, 0}; |
| |
| static int bfin_t350mcqb_request_ports(int action) |
| { |
| if (action) { |
| if (peripheral_request_list(ppi0_req_8, DRIVER_NAME)) { |
| printk(KERN_ERR "Requesting Peripherals failed\n"); |
| return -EFAULT; |
| } |
| } else |
| peripheral_free_list(ppi0_req_8); |
| |
| return 0; |
| } |
| |
| static int bfin_t350mcqb_fb_open(struct fb_info *info, int user) |
| { |
| struct bfin_t350mcqbfb_info *fbi = info->par; |
| |
| spin_lock(&fbi->lock); |
| fbi->lq043_open_cnt++; |
| |
| if (fbi->lq043_open_cnt <= 1) { |
| |
| bfin_t350mcqb_disable_ppi(); |
| SSYNC(); |
| |
| bfin_t350mcqb_config_dma(fbi); |
| bfin_t350mcqb_config_ppi(fbi); |
| bfin_t350mcqb_init_timers(); |
| |
| /* start dma */ |
| enable_dma(CH_PPI); |
| bfin_t350mcqb_enable_ppi(); |
| bfin_t350mcqb_start_timers(); |
| } |
| |
| spin_unlock(&fbi->lock); |
| |
| return 0; |
| } |
| |
| static int bfin_t350mcqb_fb_release(struct fb_info *info, int user) |
| { |
| struct bfin_t350mcqbfb_info *fbi = info->par; |
| |
| spin_lock(&fbi->lock); |
| |
| fbi->lq043_open_cnt--; |
| |
| if (fbi->lq043_open_cnt <= 0) { |
| bfin_t350mcqb_disable_ppi(); |
| SSYNC(); |
| disable_dma(CH_PPI); |
| bfin_t350mcqb_stop_timers(); |
| } |
| |
| spin_unlock(&fbi->lock); |
| |
| return 0; |
| } |
| |
| static int bfin_t350mcqb_fb_check_var(struct fb_var_screeninfo *var, |
| struct fb_info *info) |
| { |
| |
| switch (var->bits_per_pixel) { |
| case 24:/* TRUECOLOUR, 16m */ |
| var->red.offset = 0; |
| var->green.offset = 8; |
| var->blue.offset = 16; |
| var->red.length = var->green.length = var->blue.length = 8; |
| var->transp.offset = 0; |
| var->transp.length = 0; |
| var->transp.msb_right = 0; |
| var->red.msb_right = 0; |
| var->green.msb_right = 0; |
| var->blue.msb_right = 0; |
| break; |
| default: |
| pr_debug("%s: depth not supported: %u BPP\n", __func__, |
| var->bits_per_pixel); |
| return -EINVAL; |
| } |
| |
| if (info->var.xres != var->xres || info->var.yres != var->yres || |
| info->var.xres_virtual != var->xres_virtual || |
| info->var.yres_virtual != var->yres_virtual) { |
| pr_debug("%s: Resolution not supported: X%u x Y%u \n", |
| __func__, var->xres, var->yres); |
| return -EINVAL; |
| } |
| |
| /* |
| * Memory limit |
| */ |
| |
| if ((info->fix.line_length * var->yres_virtual) > info->fix.smem_len) { |
| pr_debug("%s: Memory Limit requested yres_virtual = %u\n", |
| __func__, var->yres_virtual); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| int bfin_t350mcqb_fb_cursor(struct fb_info *info, struct fb_cursor *cursor) |
| { |
| if (nocursor) |
| return 0; |
| else |
| return -EINVAL; /* just to force soft_cursor() call */ |
| } |
| |
| static int bfin_t350mcqb_fb_setcolreg(u_int regno, u_int red, u_int green, |
| u_int blue, u_int transp, |
| struct fb_info *info) |
| { |
| if (regno >= BFIN_LCD_NBR_PALETTE_ENTRIES) |
| return -EINVAL; |
| |
| if (info->var.grayscale) { |
| /* grayscale = 0.30*R + 0.59*G + 0.11*B */ |
| red = green = blue = (red * 77 + green * 151 + blue * 28) >> 8; |
| } |
| |
| if (info->fix.visual == FB_VISUAL_TRUECOLOR) { |
| |
| u32 value; |
| /* Place color in the pseudopalette */ |
| if (regno > 16) |
| return -EINVAL; |
| |
| red >>= (16 - info->var.red.length); |
| green >>= (16 - info->var.green.length); |
| blue >>= (16 - info->var.blue.length); |
| |
| value = (red << info->var.red.offset) | |
| (green << info->var.green.offset) | |
| (blue << info->var.blue.offset); |
| value &= 0xFFFFFF; |
| |
| ((u32 *) (info->pseudo_palette))[regno] = value; |
| |
| } |
| |
| return 0; |
| } |
| |
| static struct fb_ops bfin_t350mcqb_fb_ops = { |
| .owner = THIS_MODULE, |
| .fb_open = bfin_t350mcqb_fb_open, |
| .fb_release = bfin_t350mcqb_fb_release, |
| .fb_check_var = bfin_t350mcqb_fb_check_var, |
| .fb_fillrect = cfb_fillrect, |
| .fb_copyarea = cfb_copyarea, |
| .fb_imageblit = cfb_imageblit, |
| .fb_cursor = bfin_t350mcqb_fb_cursor, |
| .fb_setcolreg = bfin_t350mcqb_fb_setcolreg, |
| }; |
| |
| #ifndef NO_BL_SUPPORT |
| static int bl_get_brightness(struct backlight_device *bd) |
| { |
| return 0; |
| } |
| |
| static const struct backlight_ops bfin_lq043fb_bl_ops = { |
| .get_brightness = bl_get_brightness, |
| }; |
| |
| static struct backlight_device *bl_dev; |
| |
| static int bfin_lcd_get_power(struct lcd_device *dev) |
| { |
| return 0; |
| } |
| |
| static int bfin_lcd_set_power(struct lcd_device *dev, int power) |
| { |
| return 0; |
| } |
| |
| static int bfin_lcd_get_contrast(struct lcd_device *dev) |
| { |
| return 0; |
| } |
| |
| static int bfin_lcd_set_contrast(struct lcd_device *dev, int contrast) |
| { |
| |
| return 0; |
| } |
| |
| static int bfin_lcd_check_fb(struct lcd_device *dev, struct fb_info *fi) |
| { |
| if (!fi || (fi == &bfin_t350mcqb_fb)) |
| return 1; |
| return 0; |
| } |
| |
| static struct lcd_ops bfin_lcd_ops = { |
| .get_power = bfin_lcd_get_power, |
| .set_power = bfin_lcd_set_power, |
| .get_contrast = bfin_lcd_get_contrast, |
| .set_contrast = bfin_lcd_set_contrast, |
| .check_fb = bfin_lcd_check_fb, |
| }; |
| |
| static struct lcd_device *lcd_dev; |
| #endif |
| |
| static irqreturn_t bfin_t350mcqb_irq_error(int irq, void *dev_id) |
| { |
| /*struct bfin_t350mcqbfb_info *info = (struct bfin_t350mcqbfb_info *)dev_id;*/ |
| |
| u16 status = bfin_read_PPI_STATUS(); |
| bfin_write_PPI_STATUS(0xFFFF); |
| |
| if (status) { |
| bfin_t350mcqb_disable_ppi(); |
| disable_dma(CH_PPI); |
| |
| /* start dma */ |
| enable_dma(CH_PPI); |
| bfin_t350mcqb_enable_ppi(); |
| bfin_write_PPI_STATUS(0xFFFF); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int __devinit bfin_t350mcqb_probe(struct platform_device *pdev) |
| { |
| #ifndef NO_BL_SUPPORT |
| struct backlight_properties props; |
| #endif |
| struct bfin_t350mcqbfb_info *info; |
| struct fb_info *fbinfo; |
| int ret; |
| |
| printk(KERN_INFO DRIVER_NAME ": %dx%d %d-bit RGB FrameBuffer initializing...\n", |
| LCD_X_RES, LCD_Y_RES, LCD_BPP); |
| |
| if (request_dma(CH_PPI, "CH_PPI") < 0) { |
| printk(KERN_ERR DRIVER_NAME |
| ": couldn't request CH_PPI DMA\n"); |
| ret = -EFAULT; |
| goto out1; |
| } |
| |
| fbinfo = |
| framebuffer_alloc(sizeof(struct bfin_t350mcqbfb_info), &pdev->dev); |
| if (!fbinfo) { |
| ret = -ENOMEM; |
| goto out2; |
| } |
| |
| info = fbinfo->par; |
| info->fb = fbinfo; |
| info->dev = &pdev->dev; |
| |
| platform_set_drvdata(pdev, fbinfo); |
| |
| strcpy(fbinfo->fix.id, driver_name); |
| |
| fbinfo->fix.type = FB_TYPE_PACKED_PIXELS; |
| fbinfo->fix.type_aux = 0; |
| fbinfo->fix.xpanstep = 0; |
| fbinfo->fix.ypanstep = 0; |
| fbinfo->fix.ywrapstep = 0; |
| fbinfo->fix.accel = FB_ACCEL_NONE; |
| fbinfo->fix.visual = FB_VISUAL_TRUECOLOR; |
| |
| fbinfo->var.nonstd = 0; |
| fbinfo->var.activate = FB_ACTIVATE_NOW; |
| fbinfo->var.height = 53; |
| fbinfo->var.width = 70; |
| fbinfo->var.accel_flags = 0; |
| fbinfo->var.vmode = FB_VMODE_NONINTERLACED; |
| |
| fbinfo->var.xres = LCD_X_RES; |
| fbinfo->var.xres_virtual = LCD_X_RES; |
| fbinfo->var.yres = LCD_Y_RES; |
| fbinfo->var.yres_virtual = LCD_Y_RES; |
| fbinfo->var.bits_per_pixel = LCD_BPP; |
| |
| fbinfo->var.red.offset = 0; |
| fbinfo->var.green.offset = 8; |
| fbinfo->var.blue.offset = 16; |
| fbinfo->var.transp.offset = 0; |
| fbinfo->var.red.length = 8; |
| fbinfo->var.green.length = 8; |
| fbinfo->var.blue.length = 8; |
| fbinfo->var.transp.length = 0; |
| fbinfo->fix.smem_len = LCD_X_RES * LCD_Y_RES * LCD_BPP / 8; |
| |
| fbinfo->fix.line_length = fbinfo->var.xres_virtual * |
| fbinfo->var.bits_per_pixel / 8; |
| |
| |
| fbinfo->fbops = &bfin_t350mcqb_fb_ops; |
| fbinfo->flags = FBINFO_FLAG_DEFAULT; |
| |
| info->fb_buffer = dma_alloc_coherent(NULL, fbinfo->fix.smem_len + |
| ACTIVE_VIDEO_MEM_OFFSET, |
| &info->dma_handle, GFP_KERNEL); |
| |
| if (NULL == info->fb_buffer) { |
| printk(KERN_ERR DRIVER_NAME |
| ": couldn't allocate dma buffer.\n"); |
| ret = -ENOMEM; |
| goto out3; |
| } |
| |
| fbinfo->screen_base = (void *)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; |
| fbinfo->fix.smem_start = (int)info->fb_buffer + ACTIVE_VIDEO_MEM_OFFSET; |
| |
| fbinfo->fbops = &bfin_t350mcqb_fb_ops; |
| |
| fbinfo->pseudo_palette = &info->pseudo_pal; |
| |
| if (fb_alloc_cmap(&fbinfo->cmap, BFIN_LCD_NBR_PALETTE_ENTRIES, 0) |
| < 0) { |
| printk(KERN_ERR DRIVER_NAME |
| "Fail to allocate colormap (%d entries)\n", |
| BFIN_LCD_NBR_PALETTE_ENTRIES); |
| ret = -EFAULT; |
| goto out4; |
| } |
| |
| if (bfin_t350mcqb_request_ports(1)) { |
| printk(KERN_ERR DRIVER_NAME ": couldn't request gpio port.\n"); |
| ret = -EFAULT; |
| goto out6; |
| } |
| |
| info->irq = platform_get_irq(pdev, 0); |
| if (info->irq < 0) { |
| ret = -EINVAL; |
| goto out7; |
| } |
| |
| ret = request_irq(info->irq, bfin_t350mcqb_irq_error, 0, |
| "PPI ERROR", info); |
| if (ret < 0) { |
| printk(KERN_ERR DRIVER_NAME |
| ": unable to request PPI ERROR IRQ\n"); |
| goto out7; |
| } |
| |
| if (register_framebuffer(fbinfo) < 0) { |
| printk(KERN_ERR DRIVER_NAME |
| ": unable to register framebuffer.\n"); |
| ret = -EINVAL; |
| goto out8; |
| } |
| #ifndef NO_BL_SUPPORT |
| memset(&props, 0, sizeof(struct backlight_properties)); |
| props.type = BACKLIGHT_RAW; |
| props.max_brightness = 255; |
| bl_dev = backlight_device_register("bf52x-bl", NULL, NULL, |
| &bfin_lq043fb_bl_ops, &props); |
| if (IS_ERR(bl_dev)) { |
| printk(KERN_ERR DRIVER_NAME |
| ": unable to register backlight.\n"); |
| ret = -EINVAL; |
| unregister_framebuffer(fbinfo); |
| goto out8; |
| } |
| |
| lcd_dev = lcd_device_register(DRIVER_NAME, NULL, &bfin_lcd_ops); |
| lcd_dev->props.max_contrast = 255, printk(KERN_INFO "Done.\n"); |
| #endif |
| |
| return 0; |
| |
| out8: |
| free_irq(info->irq, info); |
| out7: |
| bfin_t350mcqb_request_ports(0); |
| out6: |
| fb_dealloc_cmap(&fbinfo->cmap); |
| out4: |
| dma_free_coherent(NULL, fbinfo->fix.smem_len + ACTIVE_VIDEO_MEM_OFFSET, |
| info->fb_buffer, info->dma_handle); |
| out3: |
| framebuffer_release(fbinfo); |
| out2: |
| free_dma(CH_PPI); |
| out1: |
| platform_set_drvdata(pdev, NULL); |
| |
| return ret; |
| } |
| |
| static int __devexit bfin_t350mcqb_remove(struct platform_device *pdev) |
| { |
| |
| struct fb_info *fbinfo = platform_get_drvdata(pdev); |
| struct bfin_t350mcqbfb_info *info = fbinfo->par; |
| |
| unregister_framebuffer(fbinfo); |
| |
| free_dma(CH_PPI); |
| free_irq(info->irq, info); |
| |
| if (info->fb_buffer != NULL) |
| dma_free_coherent(NULL, fbinfo->fix.smem_len + |
| ACTIVE_VIDEO_MEM_OFFSET, info->fb_buffer, |
| info->dma_handle); |
| |
| fb_dealloc_cmap(&fbinfo->cmap); |
| |
| #ifndef NO_BL_SUPPORT |
| lcd_device_unregister(lcd_dev); |
| backlight_device_unregister(bl_dev); |
| #endif |
| |
| bfin_t350mcqb_request_ports(0); |
| |
| platform_set_drvdata(pdev, NULL); |
| framebuffer_release(fbinfo); |
| |
| printk(KERN_INFO DRIVER_NAME ": Unregister LCD driver.\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bfin_t350mcqb_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| struct fb_info *fbinfo = platform_get_drvdata(pdev); |
| struct bfin_t350mcqbfb_info *fbi = fbinfo->par; |
| |
| if (fbi->lq043_open_cnt) { |
| bfin_t350mcqb_disable_ppi(); |
| disable_dma(CH_PPI); |
| bfin_t350mcqb_stop_timers(); |
| bfin_write_PPI_STATUS(-1); |
| } |
| |
| |
| return 0; |
| } |
| |
| static int bfin_t350mcqb_resume(struct platform_device *pdev) |
| { |
| struct fb_info *fbinfo = platform_get_drvdata(pdev); |
| struct bfin_t350mcqbfb_info *fbi = fbinfo->par; |
| |
| if (fbi->lq043_open_cnt) { |
| bfin_t350mcqb_config_dma(fbi); |
| bfin_t350mcqb_config_ppi(fbi); |
| bfin_t350mcqb_init_timers(); |
| |
| /* start dma */ |
| enable_dma(CH_PPI); |
| bfin_t350mcqb_enable_ppi(); |
| bfin_t350mcqb_start_timers(); |
| } |
| |
| return 0; |
| } |
| #else |
| #define bfin_t350mcqb_suspend NULL |
| #define bfin_t350mcqb_resume NULL |
| #endif |
| |
| static struct platform_driver bfin_t350mcqb_driver = { |
| .probe = bfin_t350mcqb_probe, |
| .remove = __devexit_p(bfin_t350mcqb_remove), |
| .suspend = bfin_t350mcqb_suspend, |
| .resume = bfin_t350mcqb_resume, |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init bfin_t350mcqb_driver_init(void) |
| { |
| return platform_driver_register(&bfin_t350mcqb_driver); |
| } |
| |
| static void __exit bfin_t350mcqb_driver_cleanup(void) |
| { |
| platform_driver_unregister(&bfin_t350mcqb_driver); |
| } |
| |
| MODULE_DESCRIPTION("Blackfin TFT LCD Driver"); |
| MODULE_LICENSE("GPL"); |
| |
| module_init(bfin_t350mcqb_driver_init); |
| module_exit(bfin_t350mcqb_driver_cleanup); |