| /* |
| * Battery driver for wm8350 PMIC |
| * |
| * Copyright 2007, 2008 Wolfson Microelectronics PLC. |
| * |
| * Based on OLPC Battery Driver |
| * |
| * Copyright 2006 David Woodhouse <dwmw2@infradead.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/err.h> |
| #include <linux/platform_device.h> |
| #include <linux/power_supply.h> |
| #include <linux/mfd/wm8350/supply.h> |
| #include <linux/mfd/wm8350/core.h> |
| #include <linux/mfd/wm8350/comparator.h> |
| |
| static int wm8350_read_battery_uvolts(struct wm8350 *wm8350) |
| { |
| return wm8350_read_auxadc(wm8350, WM8350_AUXADC_BATT, 0, 0) |
| * WM8350_AUX_COEFF; |
| } |
| |
| static int wm8350_read_line_uvolts(struct wm8350 *wm8350) |
| { |
| return wm8350_read_auxadc(wm8350, WM8350_AUXADC_LINE, 0, 0) |
| * WM8350_AUX_COEFF; |
| } |
| |
| static int wm8350_read_usb_uvolts(struct wm8350 *wm8350) |
| { |
| return wm8350_read_auxadc(wm8350, WM8350_AUXADC_USB, 0, 0) |
| * WM8350_AUX_COEFF; |
| } |
| |
| #define WM8350_BATT_SUPPLY 1 |
| #define WM8350_USB_SUPPLY 2 |
| #define WM8350_LINE_SUPPLY 4 |
| |
| static inline int wm8350_charge_time_min(struct wm8350 *wm8350, int min) |
| { |
| if (!wm8350->power.rev_g_coeff) |
| return (((min - 30) / 15) & 0xf) << 8; |
| else |
| return (((min - 30) / 30) & 0xf) << 8; |
| } |
| |
| static int wm8350_get_supplies(struct wm8350 *wm8350) |
| { |
| u16 sm, ov, co, chrg; |
| int supplies = 0; |
| |
| sm = wm8350_reg_read(wm8350, WM8350_STATE_MACHINE_STATUS); |
| ov = wm8350_reg_read(wm8350, WM8350_MISC_OVERRIDES); |
| co = wm8350_reg_read(wm8350, WM8350_COMPARATOR_OVERRIDES); |
| chrg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2); |
| |
| /* USB_SM */ |
| sm = (sm & WM8350_USB_SM_MASK) >> WM8350_USB_SM_SHIFT; |
| |
| /* CHG_ISEL */ |
| chrg &= WM8350_CHG_ISEL_MASK; |
| |
| /* If the USB state machine is active then we're using that with or |
| * without battery, otherwise check for wall supply */ |
| if (((sm == WM8350_USB_SM_100_SLV) || |
| (sm == WM8350_USB_SM_500_SLV) || |
| (sm == WM8350_USB_SM_STDBY_SLV)) |
| && !(ov & WM8350_USB_LIMIT_OVRDE)) |
| supplies = WM8350_USB_SUPPLY; |
| else if (((sm == WM8350_USB_SM_100_SLV) || |
| (sm == WM8350_USB_SM_500_SLV) || |
| (sm == WM8350_USB_SM_STDBY_SLV)) |
| && (ov & WM8350_USB_LIMIT_OVRDE) && (chrg == 0)) |
| supplies = WM8350_USB_SUPPLY | WM8350_BATT_SUPPLY; |
| else if (co & WM8350_WALL_FB_OVRDE) |
| supplies = WM8350_LINE_SUPPLY; |
| else |
| supplies = WM8350_BATT_SUPPLY; |
| |
| return supplies; |
| } |
| |
| static int wm8350_charger_config(struct wm8350 *wm8350, |
| struct wm8350_charger_policy *policy) |
| { |
| u16 reg, eoc_mA, fast_limit_mA; |
| |
| if (!policy) { |
| dev_warn(wm8350->dev, |
| "No charger policy, charger not configured.\n"); |
| return -EINVAL; |
| } |
| |
| /* make sure USB fast charge current is not > 500mA */ |
| if (policy->fast_limit_USB_mA > 500) { |
| dev_err(wm8350->dev, "USB fast charge > 500mA\n"); |
| return -EINVAL; |
| } |
| |
| eoc_mA = WM8350_CHG_EOC_mA(policy->eoc_mA); |
| |
| wm8350_reg_unlock(wm8350); |
| |
| reg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1) |
| & WM8350_CHG_ENA_R168; |
| wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1, |
| reg | eoc_mA | policy->trickle_start_mV | |
| WM8350_CHG_TRICKLE_TEMP_CHOKE | |
| WM8350_CHG_TRICKLE_USB_CHOKE | |
| WM8350_CHG_FAST_USB_THROTTLE); |
| |
| if (wm8350_get_supplies(wm8350) & WM8350_USB_SUPPLY) { |
| fast_limit_mA = |
| WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_USB_mA); |
| wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2, |
| policy->charge_mV | policy->trickle_charge_USB_mA | |
| fast_limit_mA | wm8350_charge_time_min(wm8350, |
| policy->charge_timeout)); |
| |
| } else { |
| fast_limit_mA = |
| WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_mA); |
| wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2, |
| policy->charge_mV | policy->trickle_charge_mA | |
| fast_limit_mA | wm8350_charge_time_min(wm8350, |
| policy->charge_timeout)); |
| } |
| |
| wm8350_reg_lock(wm8350); |
| return 0; |
| } |
| |
| static int wm8350_batt_status(struct wm8350 *wm8350) |
| { |
| u16 state; |
| |
| state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2); |
| state &= WM8350_CHG_STS_MASK; |
| |
| switch (state) { |
| case WM8350_CHG_STS_OFF: |
| return POWER_SUPPLY_STATUS_DISCHARGING; |
| |
| case WM8350_CHG_STS_TRICKLE: |
| case WM8350_CHG_STS_FAST: |
| return POWER_SUPPLY_STATUS_CHARGING; |
| |
| default: |
| return POWER_SUPPLY_STATUS_UNKNOWN; |
| } |
| } |
| |
| static ssize_t charger_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct wm8350 *wm8350 = dev_get_drvdata(dev); |
| char *charge; |
| int state; |
| |
| state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) & |
| WM8350_CHG_STS_MASK; |
| switch (state) { |
| case WM8350_CHG_STS_OFF: |
| charge = "Charger Off"; |
| break; |
| case WM8350_CHG_STS_TRICKLE: |
| charge = "Trickle Charging"; |
| break; |
| case WM8350_CHG_STS_FAST: |
| charge = "Fast Charging"; |
| break; |
| default: |
| return 0; |
| } |
| |
| return sprintf(buf, "%s\n", charge); |
| } |
| |
| static DEVICE_ATTR(charger_state, 0444, charger_state_show, NULL); |
| |
| static irqreturn_t wm8350_charger_handler(int irq, void *data) |
| { |
| struct wm8350 *wm8350 = data; |
| struct wm8350_power *power = &wm8350->power; |
| struct wm8350_charger_policy *policy = power->policy; |
| |
| switch (irq - wm8350->irq_base) { |
| case WM8350_IRQ_CHG_BAT_FAIL: |
| dev_err(wm8350->dev, "battery failed\n"); |
| break; |
| case WM8350_IRQ_CHG_TO: |
| dev_err(wm8350->dev, "charger timeout\n"); |
| power_supply_changed(&power->battery); |
| break; |
| |
| case WM8350_IRQ_CHG_BAT_HOT: |
| case WM8350_IRQ_CHG_BAT_COLD: |
| case WM8350_IRQ_CHG_START: |
| case WM8350_IRQ_CHG_END: |
| power_supply_changed(&power->battery); |
| break; |
| |
| case WM8350_IRQ_CHG_FAST_RDY: |
| dev_dbg(wm8350->dev, "fast charger ready\n"); |
| wm8350_charger_config(wm8350, policy); |
| wm8350_reg_unlock(wm8350); |
| wm8350_set_bits(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1, |
| WM8350_CHG_FAST); |
| wm8350_reg_lock(wm8350); |
| break; |
| |
| case WM8350_IRQ_CHG_VBATT_LT_3P9: |
| dev_warn(wm8350->dev, "battery < 3.9V\n"); |
| break; |
| case WM8350_IRQ_CHG_VBATT_LT_3P1: |
| dev_warn(wm8350->dev, "battery < 3.1V\n"); |
| break; |
| case WM8350_IRQ_CHG_VBATT_LT_2P85: |
| dev_warn(wm8350->dev, "battery < 2.85V\n"); |
| break; |
| |
| /* Supply change. We will overnotify but it should do |
| * no harm. */ |
| case WM8350_IRQ_EXT_USB_FB: |
| case WM8350_IRQ_EXT_WALL_FB: |
| wm8350_charger_config(wm8350, policy); |
| case WM8350_IRQ_EXT_BAT_FB: /* Fall through */ |
| power_supply_changed(&power->battery); |
| power_supply_changed(&power->usb); |
| power_supply_changed(&power->ac); |
| break; |
| |
| default: |
| dev_err(wm8350->dev, "Unknown interrupt %d\n", irq); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /********************************************************************* |
| * AC Power |
| *********************************************************************/ |
| static int wm8350_ac_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm8350 *wm8350 = dev_get_drvdata(psy->dev->parent); |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = !!(wm8350_get_supplies(wm8350) & |
| WM8350_LINE_SUPPLY); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = wm8350_read_line_uvolts(wm8350); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static enum power_supply_property wm8350_ac_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| }; |
| |
| /********************************************************************* |
| * USB Power |
| *********************************************************************/ |
| static int wm8350_usb_get_prop(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm8350 *wm8350 = dev_get_drvdata(psy->dev->parent); |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = !!(wm8350_get_supplies(wm8350) & |
| WM8350_USB_SUPPLY); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = wm8350_read_usb_uvolts(wm8350); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static enum power_supply_property wm8350_usb_props[] = { |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| }; |
| |
| /********************************************************************* |
| * Battery properties |
| *********************************************************************/ |
| |
| static int wm8350_bat_check_health(struct wm8350 *wm8350) |
| { |
| u16 reg; |
| |
| if (wm8350_read_battery_uvolts(wm8350) < 2850000) |
| return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; |
| |
| reg = wm8350_reg_read(wm8350, WM8350_CHARGER_OVERRIDES); |
| if (reg & WM8350_CHG_BATT_HOT_OVRDE) |
| return POWER_SUPPLY_HEALTH_OVERHEAT; |
| |
| if (reg & WM8350_CHG_BATT_COLD_OVRDE) |
| return POWER_SUPPLY_HEALTH_COLD; |
| |
| return POWER_SUPPLY_HEALTH_GOOD; |
| } |
| |
| static int wm8350_bat_get_charge_type(struct wm8350 *wm8350) |
| { |
| int state; |
| |
| state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) & |
| WM8350_CHG_STS_MASK; |
| switch (state) { |
| case WM8350_CHG_STS_OFF: |
| return POWER_SUPPLY_CHARGE_TYPE_NONE; |
| case WM8350_CHG_STS_TRICKLE: |
| return POWER_SUPPLY_CHARGE_TYPE_TRICKLE; |
| case WM8350_CHG_STS_FAST: |
| return POWER_SUPPLY_CHARGE_TYPE_FAST; |
| default: |
| return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; |
| } |
| } |
| |
| static int wm8350_bat_get_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct wm8350 *wm8350 = dev_get_drvdata(psy->dev->parent); |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = wm8350_batt_status(wm8350); |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = !!(wm8350_get_supplies(wm8350) & |
| WM8350_BATT_SUPPLY); |
| break; |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| val->intval = wm8350_read_battery_uvolts(wm8350); |
| break; |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = wm8350_bat_check_health(wm8350); |
| break; |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| val->intval = wm8350_bat_get_charge_type(wm8350); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static enum power_supply_property wm8350_bat_props[] = { |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| }; |
| |
| /********************************************************************* |
| * Initialisation |
| *********************************************************************/ |
| |
| static void wm8350_init_charger(struct wm8350 *wm8350) |
| { |
| /* register our interest in charger events */ |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, |
| wm8350_charger_handler, 0, "Battery hot", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, |
| wm8350_charger_handler, 0, "Battery cold", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, |
| wm8350_charger_handler, 0, "Battery fail", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO, |
| wm8350_charger_handler, 0, |
| "Charger timeout", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END, |
| wm8350_charger_handler, 0, |
| "Charge end", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START, |
| wm8350_charger_handler, 0, |
| "Charge start", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, |
| wm8350_charger_handler, 0, |
| "Fast charge ready", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, |
| wm8350_charger_handler, 0, |
| "Battery <3.9V", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, |
| wm8350_charger_handler, 0, |
| "Battery <3.1V", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, |
| wm8350_charger_handler, 0, |
| "Battery <2.85V", wm8350); |
| |
| /* and supply change events */ |
| wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB, |
| wm8350_charger_handler, 0, "USB", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, |
| wm8350_charger_handler, 0, "Wall", wm8350); |
| wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, |
| wm8350_charger_handler, 0, "Battery", wm8350); |
| } |
| |
| static void free_charger_irq(struct wm8350 *wm8350) |
| { |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350); |
| wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350); |
| } |
| |
| static __devinit int wm8350_power_probe(struct platform_device *pdev) |
| { |
| struct wm8350 *wm8350 = platform_get_drvdata(pdev); |
| struct wm8350_power *power = &wm8350->power; |
| struct wm8350_charger_policy *policy = power->policy; |
| struct power_supply *usb = &power->usb; |
| struct power_supply *battery = &power->battery; |
| struct power_supply *ac = &power->ac; |
| int ret; |
| |
| ac->name = "wm8350-ac"; |
| ac->type = POWER_SUPPLY_TYPE_MAINS; |
| ac->properties = wm8350_ac_props; |
| ac->num_properties = ARRAY_SIZE(wm8350_ac_props); |
| ac->get_property = wm8350_ac_get_prop; |
| ret = power_supply_register(&pdev->dev, ac); |
| if (ret) |
| return ret; |
| |
| battery->name = "wm8350-battery"; |
| battery->properties = wm8350_bat_props; |
| battery->num_properties = ARRAY_SIZE(wm8350_bat_props); |
| battery->get_property = wm8350_bat_get_property; |
| battery->use_for_apm = 1; |
| ret = power_supply_register(&pdev->dev, battery); |
| if (ret) |
| goto battery_failed; |
| |
| usb->name = "wm8350-usb", |
| usb->type = POWER_SUPPLY_TYPE_USB; |
| usb->properties = wm8350_usb_props; |
| usb->num_properties = ARRAY_SIZE(wm8350_usb_props); |
| usb->get_property = wm8350_usb_get_prop; |
| ret = power_supply_register(&pdev->dev, usb); |
| if (ret) |
| goto usb_failed; |
| |
| ret = device_create_file(&pdev->dev, &dev_attr_charger_state); |
| if (ret < 0) |
| dev_warn(wm8350->dev, "failed to add charge sysfs: %d\n", ret); |
| ret = 0; |
| |
| wm8350_init_charger(wm8350); |
| if (wm8350_charger_config(wm8350, policy) == 0) { |
| wm8350_reg_unlock(wm8350); |
| wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CHG_ENA); |
| wm8350_reg_lock(wm8350); |
| } |
| |
| return ret; |
| |
| usb_failed: |
| power_supply_unregister(battery); |
| battery_failed: |
| power_supply_unregister(ac); |
| |
| return ret; |
| } |
| |
| static __devexit int wm8350_power_remove(struct platform_device *pdev) |
| { |
| struct wm8350 *wm8350 = platform_get_drvdata(pdev); |
| struct wm8350_power *power = &wm8350->power; |
| |
| free_charger_irq(wm8350); |
| device_remove_file(&pdev->dev, &dev_attr_charger_state); |
| power_supply_unregister(&power->battery); |
| power_supply_unregister(&power->ac); |
| power_supply_unregister(&power->usb); |
| return 0; |
| } |
| |
| static struct platform_driver wm8350_power_driver = { |
| .probe = wm8350_power_probe, |
| .remove = __devexit_p(wm8350_power_remove), |
| .driver = { |
| .name = "wm8350-power", |
| }, |
| }; |
| |
| static int __init wm8350_power_init(void) |
| { |
| return platform_driver_register(&wm8350_power_driver); |
| } |
| module_init(wm8350_power_init); |
| |
| static void __exit wm8350_power_exit(void) |
| { |
| platform_driver_unregister(&wm8350_power_driver); |
| } |
| module_exit(wm8350_power_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Power supply driver for WM8350"); |
| MODULE_ALIAS("platform:wm8350-power"); |