arch/arm/mach-s3c64xx/mach-crag6410-module.c - maze/linux - Git at Google

 /* Speyside modules for Cragganmore - board data probing
  *
  * Copyright 2011 Wolfson Microelectronics plc
  *	Mark Brown <broonie@opensource.wolfsonmicro.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */

 #include <linux/export.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
 #include <linux/spi/spi.h>

 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 #include <linux/mfd/wm8994/pdata.h>
 #include <linux/mfd/arizona/pdata.h>

 #include <linux/regulator/machine.h>

 #include <sound/wm5100.h>
 #include <sound/wm8996.h>
 #include <sound/wm8962.h>
 #include <sound/wm9081.h>

 #include <linux/platform_data/spi-s3c64xx.h>

 #include <mach/crag6410.h>

 static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
 	.line = S3C64XX_GPC(3),
 };

 static struct spi_board_info wm1253_devs[] = {
 	[0] = {
 		.modalias	= "wm0010",
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= S3C_EINT(5),
 		.controller_data = &wm0010_spi_csinfo,
 	},
 };

 static struct wm5100_pdata wm5100_pdata = {
 	.ldo_ena = S3C64XX_GPN(7),
 	.irq_flags = IRQF_TRIGGER_HIGH,
 	.gpio_base = CODEC_GPIO_BASE,

 	.in_mode = {
 		WM5100_IN_DIFF,
 		WM5100_IN_DIFF,
 		WM5100_IN_DIFF,
 		WM5100_IN_SE,
 	},

 	.hp_pol = CODEC_GPIO_BASE + 3,
 	.jack_modes = {
 		{ WM5100_MICDET_MICBIAS3, 0, 0 },
 		{ WM5100_MICDET_MICBIAS2, 1, 1 },
 	},

 	.gpio_defaults = {
 		0,
 		0,
 		0,
 		0,
 		0x2, /* IRQ: CMOS output */
 		0x3, /* CLKOUT: CMOS output */
 	},
 };

 static struct wm8996_retune_mobile_config wm8996_retune[] = {
 	{
 		.name = "Sub LPF",
 		.rate = 48000,
 		.regs = {
 			0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
 			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
 			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
 		},
 	},
 	{
 		.name = "Sub HPF",
 		.rate = 48000,
 		.regs = {
 			0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
 			0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
 			0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
 		},
 	},
 };

 static struct wm8996_pdata wm8996_pdata __initdata = {
 	.ldo_ena = S3C64XX_GPN(7),
 	.gpio_base = CODEC_GPIO_BASE,
 	.micdet_def = 1,
 	.inl_mode = WM8996_DIFFERRENTIAL_1,
 	.inr_mode = WM8996_DIFFERRENTIAL_1,

 	.irq_flags = IRQF_TRIGGER_RISING,

 	.gpio_default = {
 		0x8001, /* GPIO1 == ADCLRCLK1 */
 		0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
 		0x0141, /* GPIO3 == HP_SEL */
 		0x0002, /* GPIO4 == IRQ */
 		0x020e, /* GPIO5 == CLKOUT */
 	},

 	.retune_mobile_cfgs = wm8996_retune,
 	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
 };

 static struct wm8962_pdata wm8962_pdata __initdata = {
 	.gpio_init = {
 		0,
 		WM8962_GPIO_FN_OPCLK,
 		WM8962_GPIO_FN_DMICCLK,
 		0,
 		0x8000 | WM8962_GPIO_FN_DMICDAT,
 		WM8962_GPIO_FN_IRQ,    /* Open drain mode */
 	},
 	.in4_dc_measure = true,
 };

 static struct wm9081_pdata wm9081_pdata __initdata = {
 	.irq_high = false,
 	.irq_cmos = false,
 };

 static const struct i2c_board_info wm1254_devs[] = {
 	{ I2C_BOARD_INFO("wm8996", 0x1a),
 	  .platform_data = &wm8996_pdata,
 	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
 	},
 	{ I2C_BOARD_INFO("wm9081", 0x6c),
 	  .platform_data = &wm9081_pdata, },
 };

 static const struct i2c_board_info wm1255_devs[] = {
 	{ I2C_BOARD_INFO("wm5100", 0x1a),
 	  .platform_data = &wm5100_pdata,
 	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
 	},
 	{ I2C_BOARD_INFO("wm9081", 0x6c),
 	  .platform_data = &wm9081_pdata, },
 };

 static const struct i2c_board_info wm1259_devs[] = {
 	{ I2C_BOARD_INFO("wm8962", 0x1a),
 	  .platform_data = &wm8962_pdata,
 	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
 	},
 };

 static struct regulator_init_data wm8994_ldo1 = {
 	.supply_regulator = "WALLVDD",
 };

 static struct regulator_init_data wm8994_ldo2 = {
 	.supply_regulator = "WALLVDD",
 };

 static struct wm8994_pdata wm8994_pdata = {
 	.gpio_base = CODEC_GPIO_BASE,
 	.gpio_defaults = {
 		0x3,          /* IRQ out, active high, CMOS */
 	},
 	.ldo = {
 		 { .init_data = &wm8994_ldo1, },
 		 { .init_data = &wm8994_ldo2, },
 	},
 };

 static const struct i2c_board_info wm1277_devs[] = {
 	{ I2C_BOARD_INFO("wm8958", 0x1a),  /* WM8958 is the superset */
 	  .platform_data = &wm8994_pdata,
 	  .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
 	},
 };

 static struct arizona_pdata wm5102_pdata = {
 	.ldoena = S3C64XX_GPN(7),
 	.gpio_base = CODEC_GPIO_BASE,
 	.irq_active_high = true,
 	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
 	.gpio_defaults = {
 		[2] = 0x10000, /* AIF3TXLRCLK */
 		[3] = 0x4,     /* OPCLK */
 	},
 };

 static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
 	.line = S3C64XX_GPN(5),
 };

 static struct spi_board_info wm5102_spi_devs[] = {
 	[0] = {
 		.modalias	= "wm5102",
 		.max_speed_hz	= 10 * 1000 * 1000,
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
 		.irq		= GLENFARCLAS_PMIC_IRQ_BASE +
 				  WM831X_IRQ_GPIO_2,
 		.controller_data = &wm5102_spi_csinfo,
 		.platform_data = &wm5102_pdata,
 	},
 };

 static const struct i2c_board_info wm6230_i2c_devs[] = {
 	{ I2C_BOARD_INFO("wm9081", 0x6c),
 	  .platform_data = &wm9081_pdata, },
 };

 static __devinitdata const struct {
 	u8 id;
 	const char *name;
 	const struct i2c_board_info *i2c_devs;
 	int num_i2c_devs;
 	const struct spi_board_info *spi_devs;
 	int num_spi_devs;
 } gf_mods[] = {
 	{ .id = 0x01, .name = "1250-EV1 Springbank" },
 	{ .id = 0x02, .name = "1251-EV1 Jura" },
 	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
 	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
 	{ .id = 0x14, .name = "6271-EV1 Lochnagar" },
 	{ .id = 0x15, .name = "6320-EV1 Bells",
 	  .i2c_devs = wm6230_i2c_devs,
 	  .num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
 	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .name = "1253-EV1 Tomatin",
 	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
 	{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
 	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
 	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
 	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
 	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
 	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
 	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
 	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut",
 	  .spi_devs = wm5102_spi_devs,
 	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
 };

 static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
 					 const struct i2c_device_id *i2c_id)
 {
 	int ret, i, j, id, rev;

 	ret = i2c_smbus_read_byte_data(i2c, 0);
 	if (ret < 0) {
 		dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
 		return ret;
 	}

 	id = (ret & 0xfe) >> 2;
 	rev = ret & 0x3;
 	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
 		if (id == gf_mods[i].id)
 			break;

 	if (i < ARRAY_SIZE(gf_mods)) {
 		dev_info(&i2c->dev, "%s revision %d\n",
 			 gf_mods[i].name, rev + 1);

 		for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
 			if (!i2c_new_device(i2c->adapter,
 					    &(gf_mods[i].i2c_devs[j])))
 				dev_err(&i2c->dev,
 					"Failed to register dev: %d\n", ret);
 		}

 		spi_register_board_info(gf_mods[i].spi_devs,
 					gf_mods[i].num_spi_devs);
 	} else {
 		dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
 			 id, rev + 1);
 	}

 	return 0;
 }

 static const struct i2c_device_id wlf_gf_module_id[] = {
 	{ "wlf-gf-module", 0 },
 	{ }
 };

 static struct i2c_driver wlf_gf_module_driver = {
 	.driver = {
 		.name = "wlf-gf-module",
 		.owner = THIS_MODULE,
 	},
 	.probe = wlf_gf_module_probe,
 	.id_table = wlf_gf_module_id,
 };

 static int __init wlf_gf_module_register(void)
 {
 	return i2c_add_driver(&wlf_gf_module_driver);
 }
 module_init(wlf_gf_module_register);
	/* Speyside modules for Cragganmore - board data probing
	*
	* Copyright 2011 Wolfson Microelectronics plc
	* Mark Brown <broonie@opensource.wolfsonmicro.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*/

	#include <linux/export.h>
	#include <linux/interrupt.h>
	#include <linux/i2c.h>
	#include <linux/spi/spi.h>

	#include <linux/mfd/wm831x/irq.h>
	#include <linux/mfd/wm831x/gpio.h>
	#include <linux/mfd/wm8994/pdata.h>
	#include <linux/mfd/arizona/pdata.h>

	#include <linux/regulator/machine.h>

	#include <sound/wm5100.h>
	#include <sound/wm8996.h>
	#include <sound/wm8962.h>
	#include <sound/wm9081.h>

	#include <linux/platform_data/spi-s3c64xx.h>

	#include <mach/crag6410.h>

	static struct s3c64xx_spi_csinfo wm0010_spi_csinfo = {
	.line = S3C64XX_GPC(3),
	};

	static struct spi_board_info wm1253_devs[] = {
	[0] = {
	.modalias = "wm0010",
	.bus_num = 0,
	.chip_select = 0,
	.mode = SPI_MODE_0,
	.irq = S3C_EINT(5),
	.controller_data = &wm0010_spi_csinfo,
	},
	};

	static struct wm5100_pdata wm5100_pdata = {
	.ldo_ena = S3C64XX_GPN(7),
	.irq_flags = IRQF_TRIGGER_HIGH,
	.gpio_base = CODEC_GPIO_BASE,

	.in_mode = {
	WM5100_IN_DIFF,
	WM5100_IN_DIFF,
	WM5100_IN_DIFF,
	WM5100_IN_SE,
	},

	.hp_pol = CODEC_GPIO_BASE + 3,
	.jack_modes = {
	{ WM5100_MICDET_MICBIAS3, 0, 0 },
	{ WM5100_MICDET_MICBIAS2, 1, 1 },
	},

	.gpio_defaults = {
	0,
	0,
	0,
	0,
	0x2, /* IRQ: CMOS output */
	0x3, /* CLKOUT: CMOS output */
	},
	};

	static struct wm8996_retune_mobile_config wm8996_retune[] = {
	{
	.name = "Sub LPF",
	.rate = 48000,
	.regs = {
	0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
	0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
	0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
	},
	},
	{
	.name = "Sub HPF",
	.rate = 48000,
	.regs = {
	0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000,
	0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000,
	0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000
	},
	},
	};

	static struct wm8996_pdata wm8996_pdata __initdata = {
	.ldo_ena = S3C64XX_GPN(7),
	.gpio_base = CODEC_GPIO_BASE,
	.micdet_def = 1,
	.inl_mode = WM8996_DIFFERRENTIAL_1,
	.inr_mode = WM8996_DIFFERRENTIAL_1,

	.irq_flags = IRQF_TRIGGER_RISING,

	.gpio_default = {
	0x8001, /* GPIO1 == ADCLRCLK1 */
	0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */
	0x0141, /* GPIO3 == HP_SEL */
	0x0002, /* GPIO4 == IRQ */
	0x020e, /* GPIO5 == CLKOUT */
	},

	.retune_mobile_cfgs = wm8996_retune,
	.num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune),
	};

	static struct wm8962_pdata wm8962_pdata __initdata = {
	.gpio_init = {
	0,
	WM8962_GPIO_FN_OPCLK,
	WM8962_GPIO_FN_DMICCLK,
	0,
	0x8000 \| WM8962_GPIO_FN_DMICDAT,
	WM8962_GPIO_FN_IRQ, /* Open drain mode */
	},
	.in4_dc_measure = true,
	};

	static struct wm9081_pdata wm9081_pdata __initdata = {
	.irq_high = false,
	.irq_cmos = false,
	};

	static const struct i2c_board_info wm1254_devs[] = {
	{ I2C_BOARD_INFO("wm8996", 0x1a),
	.platform_data = &wm8996_pdata,
	.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
	},
	{ I2C_BOARD_INFO("wm9081", 0x6c),
	.platform_data = &wm9081_pdata, },
	};

	static const struct i2c_board_info wm1255_devs[] = {
	{ I2C_BOARD_INFO("wm5100", 0x1a),
	.platform_data = &wm5100_pdata,
	.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
	},
	{ I2C_BOARD_INFO("wm9081", 0x6c),
	.platform_data = &wm9081_pdata, },
	};

	static const struct i2c_board_info wm1259_devs[] = {
	{ I2C_BOARD_INFO("wm8962", 0x1a),
	.platform_data = &wm8962_pdata,
	.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
	},
	};

	static struct regulator_init_data wm8994_ldo1 = {
	.supply_regulator = "WALLVDD",
	};

	static struct regulator_init_data wm8994_ldo2 = {
	.supply_regulator = "WALLVDD",
	};

	static struct wm8994_pdata wm8994_pdata = {
	.gpio_base = CODEC_GPIO_BASE,
	.gpio_defaults = {
	0x3, /* IRQ out, active high, CMOS */
	},
	.ldo = {
	{ .init_data = &wm8994_ldo1, },
	{ .init_data = &wm8994_ldo2, },
	},
	};

	static const struct i2c_board_info wm1277_devs[] = {
	{ I2C_BOARD_INFO("wm8958", 0x1a), /* WM8958 is the superset */
	.platform_data = &wm8994_pdata,
	.irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2,
	},
	};

	static struct arizona_pdata wm5102_pdata = {
	.ldoena = S3C64XX_GPN(7),
	.gpio_base = CODEC_GPIO_BASE,
	.irq_active_high = true,
	.micd_pol_gpio = CODEC_GPIO_BASE + 4,
	.gpio_defaults = {
	[2] = 0x10000, /* AIF3TXLRCLK */
	[3] = 0x4, /* OPCLK */
	},
	};

	static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
	.line = S3C64XX_GPN(5),
	};

	static struct spi_board_info wm5102_spi_devs[] = {
	[0] = {
	.modalias = "wm5102",
	.max_speed_hz = 10 * 1000 * 1000,
	.bus_num = 0,
	.chip_select = 0,
	.mode = SPI_MODE_0,
	.irq = GLENFARCLAS_PMIC_IRQ_BASE +
	WM831X_IRQ_GPIO_2,
	.controller_data = &wm5102_spi_csinfo,
	.platform_data = &wm5102_pdata,
	},
	};

	static const struct i2c_board_info wm6230_i2c_devs[] = {
	{ I2C_BOARD_INFO("wm9081", 0x6c),
	.platform_data = &wm9081_pdata, },
	};

	static __devinitdata const struct {
	u8 id;
	const char *name;
	const struct i2c_board_info *i2c_devs;
	int num_i2c_devs;
	const struct spi_board_info *spi_devs;
	int num_spi_devs;
	} gf_mods[] = {
	{ .id = 0x01, .name = "1250-EV1 Springbank" },
	{ .id = 0x02, .name = "1251-EV1 Jura" },
	{ .id = 0x03, .name = "1252-EV1 Glenlivet" },
	{ .id = 0x11, .name = "6249-EV2 Glenfarclas", },
	{ .id = 0x14, .name = "6271-EV1 Lochnagar" },
	{ .id = 0x15, .name = "6320-EV1 Bells",
	.i2c_devs = wm6230_i2c_devs,
	.num_i2c_devs = ARRAY_SIZE(wm6230_i2c_devs) },
	{ .id = 0x21, .name = "1275-EV1 Mortlach" },
	{ .id = 0x25, .name = "1274-EV1 Glencadam" },
	{ .id = 0x31, .name = "1253-EV1 Tomatin",
	.spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
	{ .id = 0x32, .name = "XXXX-EV1 Caol Illa" },
	{ .id = 0x33, .name = "XXXX-EV1 Oban" },
	{ .id = 0x34, .name = "WM0010-6320-CS42 Balblair" },
	{ .id = 0x39, .name = "1254-EV1 Dallas Dhu",
	.i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
	{ .id = 0x3a, .name = "1259-EV1 Tobermory",
	.i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
	{ .id = 0x3b, .name = "1255-EV1 Kilchoman",
	.i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
	{ .id = 0x3c, .name = "1273-EV1 Longmorn" },
	{ .id = 0x3d, .name = "1277-EV1 Littlemill",
	.i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
	{ .id = 0x3e, .name = "WM5102-6271-EV1-CS127 Amrut",
	.spi_devs = wm5102_spi_devs,
	.num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },
	};

	static __devinit int wlf_gf_module_probe(struct i2c_client *i2c,
	const struct i2c_device_id *i2c_id)
	{
	int ret, i, j, id, rev;

	ret = i2c_smbus_read_byte_data(i2c, 0);
	if (ret < 0) {
	dev_err(&i2c->dev, "Failed to read ID: %d\n", ret);
	return ret;
	}

	id = (ret & 0xfe) >> 2;
	rev = ret & 0x3;
	for (i = 0; i < ARRAY_SIZE(gf_mods); i++)
	if (id == gf_mods[i].id)
	break;

	if (i < ARRAY_SIZE(gf_mods)) {
	dev_info(&i2c->dev, "%s revision %d\n",
	gf_mods[i].name, rev + 1);

	for (j = 0; j < gf_mods[i].num_i2c_devs; j++) {
	if (!i2c_new_device(i2c->adapter,
	&(gf_mods[i].i2c_devs[j])))
	dev_err(&i2c->dev,
	"Failed to register dev: %d\n", ret);
	}

	spi_register_board_info(gf_mods[i].spi_devs,
	gf_mods[i].num_spi_devs);
	} else {
	dev_warn(&i2c->dev, "Unknown module ID 0x%x revision %d\n",
	id, rev + 1);
	}

	return 0;
	}

	static const struct i2c_device_id wlf_gf_module_id[] = {
	{ "wlf-gf-module", 0 },
	{ }
	};

	static struct i2c_driver wlf_gf_module_driver = {
	.driver = {
	.name = "wlf-gf-module",
	.owner = THIS_MODULE,
	},
	.probe = wlf_gf_module_probe,
	.id_table = wlf_gf_module_id,
	};

	static int __init wlf_gf_module_register(void)
	{
	return i2c_add_driver(&wlf_gf_module_driver);
	}
	module_init(wlf_gf_module_register);