| /* linux/arch/arm/mach-exynos4/dev-ahci.c |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * EXYNOS4 - AHCI support |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/platform_device.h> |
| #include <linux/ahci_platform.h> |
| |
| #include <plat/cpu.h> |
| |
| #include <mach/irqs.h> |
| #include <mach/map.h> |
| #include <mach/regs-pmu.h> |
| |
| /* PHY Control Register */ |
| #define SATA_CTRL0 0x0 |
| /* PHY Link Control Register */ |
| #define SATA_CTRL1 0x4 |
| /* PHY Status Register */ |
| #define SATA_PHY_STATUS 0x8 |
| |
| #define SATA_CTRL0_RX_DATA_VALID(x) (x << 27) |
| #define SATA_CTRL0_SPEED_MODE (1 << 26) |
| #define SATA_CTRL0_M_PHY_CAL (1 << 19) |
| #define SATA_CTRL0_PHY_CMU_RST_N (1 << 10) |
| #define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9) |
| #define SATA_CTRL0_PHY_POR_N (1 << 8) |
| |
| #define SATA_CTRL1_RST_PMALIVE_N (1 << 8) |
| #define SATA_CTRL1_RST_RXOOB_N (1 << 7) |
| #define SATA_CTRL1_RST_RX_N (1 << 6) |
| #define SATA_CTRL1_RST_TX_N (1 << 5) |
| |
| #define SATA_PHY_STATUS_CMU_OK (1 << 18) |
| #define SATA_PHY_STATUS_LANE_OK (1 << 16) |
| |
| #define LANE0 0x200 |
| #define COM_LANE 0xA00 |
| |
| #define HOST_PORTS_IMPL 0xC |
| #define SCLK_SATA_FREQ (67 * MHZ) |
| |
| static void __iomem *phy_base, *phy_ctrl; |
| |
| struct phy_reg { |
| u8 reg; |
| u8 val; |
| }; |
| |
| /* SATA PHY setup */ |
| static const struct phy_reg exynos4_sataphy_cmu[] = { |
| { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 }, |
| { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 }, |
| { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 }, |
| { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 }, |
| { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 }, |
| { 0x6b, 0xc8 }, { 0x6c, 0x06 }, |
| }; |
| |
| static const struct phy_reg exynos4_sataphy_lane[] = { |
| { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 }, |
| { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 }, |
| { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e }, |
| { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 }, |
| { 0x51, 0x0f }, |
| }; |
| |
| static const struct phy_reg exynos4_sataphy_comlane[] = { |
| { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d }, |
| { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 }, |
| { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 }, |
| { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 }, |
| { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 }, |
| { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 }, |
| { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 }, |
| { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d }, |
| { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 }, |
| { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 }, |
| { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 }, |
| { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff }, |
| { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 }, |
| { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 }, |
| }; |
| |
| static int wait_for_phy_ready(void __iomem *reg, unsigned long bit) |
| { |
| unsigned long timeout; |
| |
| /* wait for maximum of 3 sec */ |
| timeout = jiffies + msecs_to_jiffies(3000); |
| while (!(__raw_readl(reg) & bit)) { |
| if (time_after(jiffies, timeout)) |
| return -1; |
| cpu_relax(); |
| } |
| return 0; |
| } |
| |
| static int ahci_phy_init(void __iomem *mmio) |
| { |
| int i, ctrl0; |
| |
| for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++) |
| __raw_writeb(exynos4_sataphy_cmu[i].val, |
| phy_base + (exynos4_sataphy_cmu[i].reg * 4)); |
| |
| for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++) |
| __raw_writeb(exynos4_sataphy_lane[i].val, |
| phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4); |
| |
| for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++) |
| __raw_writeb(exynos4_sataphy_comlane[i].val, |
| phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4); |
| |
| __raw_writeb(0x07, phy_base); |
| |
| ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); |
| ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N; |
| __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); |
| |
| if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, |
| SATA_PHY_STATUS_CMU_OK) < 0) { |
| printk(KERN_ERR "PHY CMU not ready\n"); |
| return -EBUSY; |
| } |
| |
| __raw_writeb(0x03, phy_base + (COM_LANE * 4)); |
| |
| ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); |
| ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N; |
| __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); |
| |
| if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS, |
| SATA_PHY_STATUS_LANE_OK) < 0) { |
| printk(KERN_ERR "PHY LANE not ready\n"); |
| return -EBUSY; |
| } |
| |
| ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0); |
| ctrl0 |= SATA_CTRL0_M_PHY_CAL; |
| __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0); |
| |
| return 0; |
| } |
| |
| static int exynos4_ahci_init(struct device *dev, void __iomem *mmio) |
| { |
| struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata; |
| int val, ret; |
| |
| phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K); |
| if (!phy_base) { |
| dev_err(dev, "failed to allocate memory for SATA PHY\n"); |
| return -ENOMEM; |
| } |
| |
| phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16); |
| if (!phy_ctrl) { |
| dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n"); |
| ret = -ENOMEM; |
| goto err1; |
| } |
| |
| clk_sata = clk_get(dev, "sata"); |
| if (IS_ERR(clk_sata)) { |
| dev_err(dev, "failed to get sata clock\n"); |
| ret = PTR_ERR(clk_sata); |
| clk_sata = NULL; |
| goto err2; |
| |
| } |
| clk_enable(clk_sata); |
| |
| clk_sataphy = clk_get(dev, "sataphy"); |
| if (IS_ERR(clk_sataphy)) { |
| dev_err(dev, "failed to get sataphy clock\n"); |
| ret = PTR_ERR(clk_sataphy); |
| clk_sataphy = NULL; |
| goto err3; |
| } |
| clk_enable(clk_sataphy); |
| |
| clk_sclk_sata = clk_get(dev, "sclk_sata"); |
| if (IS_ERR(clk_sclk_sata)) { |
| dev_err(dev, "failed to get sclk_sata\n"); |
| ret = PTR_ERR(clk_sclk_sata); |
| clk_sclk_sata = NULL; |
| goto err4; |
| } |
| clk_enable(clk_sclk_sata); |
| clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ); |
| |
| __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL); |
| |
| /* Enable PHY link control */ |
| val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N | |
| SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N; |
| __raw_writel(val, phy_ctrl + SATA_CTRL1); |
| |
| /* Set communication speed as 3Gbps and enable PHY power */ |
| val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE | |
| SATA_CTRL0_PHY_POR_N; |
| __raw_writel(val, phy_ctrl + SATA_CTRL0); |
| |
| /* Port0 is available */ |
| __raw_writel(0x1, mmio + HOST_PORTS_IMPL); |
| |
| return ahci_phy_init(mmio); |
| |
| err4: |
| clk_disable(clk_sataphy); |
| clk_put(clk_sataphy); |
| err3: |
| clk_disable(clk_sata); |
| clk_put(clk_sata); |
| err2: |
| iounmap(phy_ctrl); |
| err1: |
| iounmap(phy_base); |
| |
| return ret; |
| } |
| |
| static struct ahci_platform_data exynos4_ahci_pdata = { |
| .init = exynos4_ahci_init, |
| }; |
| |
| static struct resource exynos4_ahci_resource[] = { |
| [0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K), |
| [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA), |
| }; |
| |
| static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32); |
| |
| struct platform_device exynos4_device_ahci = { |
| .name = "ahci", |
| .id = -1, |
| .resource = exynos4_ahci_resource, |
| .num_resources = ARRAY_SIZE(exynos4_ahci_resource), |
| .dev = { |
| .platform_data = &exynos4_ahci_pdata, |
| .dma_mask = &exynos4_ahci_dmamask, |
| .coherent_dma_mask = DMA_BIT_MASK(32), |
| }, |
| }; |