| # arch/arm/mach-exynos/Makefile |
| # |
| # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| # http://www.samsung.com/ |
| # |
| # Licensed under GPLv2 |
| |
| obj-y := |
| obj-m := |
| obj-n := |
| obj- := |
| |
| # Core |
| |
| obj-$(CONFIG_ARCH_EXYNOS) += common.o |
| obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o |
| obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o |
| obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o |
| obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o |
| |
| obj-$(CONFIG_PM) += pm.o |
| obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o |
| obj-$(CONFIG_CPU_IDLE) += cpuidle.o |
| |
| obj-$(CONFIG_ARCH_EXYNOS) += pmu.o |
| |
| obj-$(CONFIG_SMP) += platsmp.o headsmp.o |
| |
| obj-$(CONFIG_EXYNOS4_MCT) += mct.o |
| |
| obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o |
| |
| # machine support |
| |
| obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o |
| obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o |
| obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o |
| obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o |
| obj-$(CONFIG_MACH_NURI) += mach-nuri.o |
| obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o |
| |
| obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o |
| obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o |
| |
| obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o |
| obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o |
| |
| # device support |
| |
| obj-y += dev-uart.o |
| obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o |
| obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o |
| obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o |
| obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o |
| obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o |
| obj-$(CONFIG_EXYNOS_DEV_DRM) += dev-drm.o |
| obj-$(CONFIG_EXYNOS_DEV_SYSMMU) += dev-sysmmu.o |
| |
| obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o |
| obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o |
| obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o |
| obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o |
| obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o |
| obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o |
| obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o |
| obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o |