| # arch/arm/mach-exynos/Kconfig |
| # |
| # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| # http://www.samsung.com/ |
| # |
| # Licensed under GPLv2 |
| |
| # Configuration options for the EXYNOS4 |
| |
| if ARCH_EXYNOS |
| |
| menu "SAMSUNG EXYNOS SoCs Support" |
| |
| config ARCH_EXYNOS4 |
| bool "SAMSUNG EXYNOS4" |
| default y |
| select HAVE_SMP |
| select MIGHT_HAVE_CACHE_L2X0 |
| help |
| Samsung EXYNOS4 SoCs based systems |
| |
| config ARCH_EXYNOS5 |
| bool "SAMSUNG EXYNOS5" |
| select HAVE_SMP |
| help |
| Samsung EXYNOS5 (Cortex-A15) SoC based systems |
| |
| comment "EXYNOS SoCs" |
| |
| config CPU_EXYNOS4210 |
| bool "SAMSUNG EXYNOS4210" |
| default y |
| depends on ARCH_EXYNOS4 |
| select ARM_CPU_SUSPEND if PM |
| select PM_GENERIC_DOMAINS |
| select S5P_PM if PM |
| select S5P_SLEEP if PM |
| select SAMSUNG_DMADEV |
| help |
| Enable EXYNOS4210 CPU support |
| |
| config SOC_EXYNOS4212 |
| bool "SAMSUNG EXYNOS4212" |
| default y |
| depends on ARCH_EXYNOS4 |
| select S5P_PM if PM |
| select S5P_SLEEP if PM |
| select SAMSUNG_DMADEV |
| help |
| Enable EXYNOS4212 SoC support |
| |
| config SOC_EXYNOS4412 |
| bool "SAMSUNG EXYNOS4412" |
| default y |
| depends on ARCH_EXYNOS4 |
| select SAMSUNG_DMADEV |
| help |
| Enable EXYNOS4412 SoC support |
| |
| config SOC_EXYNOS5250 |
| bool "SAMSUNG EXYNOS5250" |
| default y |
| depends on ARCH_EXYNOS5 |
| select S5P_PM if PM |
| select S5P_SLEEP if PM |
| select SAMSUNG_DMADEV |
| help |
| Enable EXYNOS5250 SoC support |
| |
| config EXYNOS4_MCT |
| bool |
| default y |
| help |
| Use MCT (Multi Core Timer) as kernel timers |
| |
| config EXYNOS_DEV_DMA |
| bool |
| help |
| Compile in amba device definitions for DMA controller |
| |
| config EXYNOS4_DEV_AHCI |
| bool |
| help |
| Compile in platform device definitions for AHCI |
| |
| config EXYNOS_DEV_DRM |
| bool |
| help |
| Compile in platform device definitions for core DRM device |
| |
| config EXYNOS4_SETUP_FIMD0 |
| bool |
| help |
| Common setup code for FIMD0. |
| |
| config EXYNOS_DEV_SYSMMU |
| bool |
| help |
| Common setup code for SYSTEM MMU in EXYNOS platforms |
| |
| config EXYNOS4_DEV_DWMCI |
| bool |
| help |
| Compile in platform device definitions for DWMCI |
| |
| config EXYNOS4_DEV_USB_OHCI |
| bool |
| help |
| Compile in platform device definition for USB OHCI |
| |
| config EXYNOS4_SETUP_I2C1 |
| bool |
| help |
| Common setup code for i2c bus 1. |
| |
| config EXYNOS4_SETUP_I2C2 |
| bool |
| help |
| Common setup code for i2c bus 2. |
| |
| config EXYNOS4_SETUP_I2C3 |
| bool |
| help |
| Common setup code for i2c bus 3. |
| |
| config EXYNOS4_SETUP_I2C4 |
| bool |
| help |
| Common setup code for i2c bus 4. |
| |
| config EXYNOS4_SETUP_I2C5 |
| bool |
| help |
| Common setup code for i2c bus 5. |
| |
| config EXYNOS4_SETUP_I2C6 |
| bool |
| help |
| Common setup code for i2c bus 6. |
| |
| config EXYNOS4_SETUP_I2C7 |
| bool |
| help |
| Common setup code for i2c bus 7. |
| |
| config EXYNOS4_SETUP_KEYPAD |
| bool |
| help |
| Common setup code for keypad. |
| |
| config EXYNOS4_SETUP_SDHCI |
| bool |
| select EXYNOS4_SETUP_SDHCI_GPIO |
| help |
| Internal helper functions for EXYNOS4 based SDHCI systems. |
| |
| config EXYNOS4_SETUP_SDHCI_GPIO |
| bool |
| help |
| Common setup code for SDHCI gpio. |
| |
| config EXYNOS4_SETUP_FIMC |
| bool |
| help |
| Common setup code for the camera interfaces. |
| |
| config EXYNOS4_SETUP_USB_PHY |
| bool |
| help |
| Common setup code for USB PHY controller |
| |
| config EXYNOS_SETUP_SPI |
| bool |
| help |
| Common setup code for SPI GPIO configurations. |
| |
| # machine support |
| |
| if ARCH_EXYNOS4 |
| |
| comment "EXYNOS4210 Boards" |
| |
| config MACH_SMDKC210 |
| bool "SMDKC210" |
| select MACH_SMDKV310 |
| help |
| Machine support for Samsung SMDKC210 |
| |
| config MACH_SMDKV310 |
| bool "SMDKV310" |
| select CPU_EXYNOS4210 |
| select EXYNOS4_DEV_AHCI |
| select EXYNOS4_DEV_USB_OHCI |
| select EXYNOS4_SETUP_FIMD0 |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_KEYPAD |
| select EXYNOS4_SETUP_SDHCI |
| select EXYNOS4_SETUP_USB_PHY |
| select EXYNOS_DEV_DMA |
| select EXYNOS_DEV_DRM |
| select EXYNOS_DEV_SYSMMU |
| select S3C24XX_PWM |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC1 |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_I2C1 |
| select S3C_DEV_RTC |
| select S3C_DEV_USB_HSOTG |
| select S3C_DEV_WDT |
| select S5P_DEV_FIMC0 |
| select S5P_DEV_FIMC1 |
| select S5P_DEV_FIMC2 |
| select S5P_DEV_FIMC3 |
| select S5P_DEV_FIMD0 |
| select S5P_DEV_G2D |
| select S5P_DEV_I2C_HDMIPHY |
| select S5P_DEV_JPEG |
| select S5P_DEV_MFC |
| select S5P_DEV_TV |
| select S5P_DEV_USB_EHCI |
| select SAMSUNG_DEV_BACKLIGHT |
| select SAMSUNG_DEV_KEYPAD |
| select SAMSUNG_DEV_PWM |
| help |
| Machine support for Samsung SMDKV310 |
| |
| config MACH_ARMLEX4210 |
| bool "ARMLEX4210" |
| select CPU_EXYNOS4210 |
| select EXYNOS4_DEV_AHCI |
| select EXYNOS4_SETUP_SDHCI |
| select EXYNOS_DEV_DMA |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_RTC |
| select S3C_DEV_WDT |
| help |
| Machine support for Samsung ARMLEX4210 based on EXYNOS4210 |
| |
| config MACH_UNIVERSAL_C210 |
| bool "Mobile UNIVERSAL_C210 Board" |
| select CLKSRC_MMIO |
| select CPU_EXYNOS4210 |
| select EXYNOS4_SETUP_FIMC |
| select EXYNOS4_SETUP_FIMD0 |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_I2C3 |
| select EXYNOS4_SETUP_I2C5 |
| select EXYNOS4_SETUP_SDHCI |
| select EXYNOS4_SETUP_USB_PHY |
| select EXYNOS_DEV_DMA |
| select EXYNOS_DEV_DRM |
| select EXYNOS_DEV_SYSMMU |
| select HAVE_SCHED_CLOCK |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_I2C1 |
| select S3C_DEV_I2C3 |
| select S3C_DEV_I2C5 |
| select S3C_DEV_USB_HSOTG |
| select S5P_DEV_CSIS0 |
| select S5P_DEV_FIMC0 |
| select S5P_DEV_FIMC1 |
| select S5P_DEV_FIMC2 |
| select S5P_DEV_FIMC3 |
| select S5P_DEV_FIMD0 |
| select S5P_DEV_G2D |
| select S5P_DEV_I2C_HDMIPHY |
| select S5P_DEV_JPEG |
| select S5P_DEV_MFC |
| select S5P_DEV_ONENAND |
| select S5P_DEV_TV |
| select S5P_GPIO_INT |
| select S5P_HRT |
| select S5P_SETUP_MIPIPHY |
| help |
| Machine support for Samsung Mobile Universal S5PC210 Reference |
| Board. |
| |
| config MACH_NURI |
| bool "Mobile NURI Board" |
| select CPU_EXYNOS4210 |
| select EXYNOS4_SETUP_FIMC |
| select EXYNOS4_SETUP_FIMD0 |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_I2C3 |
| select EXYNOS4_SETUP_I2C5 |
| select EXYNOS4_SETUP_I2C6 |
| select EXYNOS4_SETUP_SDHCI |
| select EXYNOS4_SETUP_USB_PHY |
| select EXYNOS_DEV_DMA |
| select EXYNOS_DEV_DRM |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_I2C1 |
| select S3C_DEV_I2C3 |
| select S3C_DEV_I2C5 |
| select S3C_DEV_I2C6 |
| select S3C_DEV_RTC |
| select S3C_DEV_USB_HSOTG |
| select S3C_DEV_WDT |
| select S5P_DEV_CSIS0 |
| select S5P_DEV_FIMC0 |
| select S5P_DEV_FIMC1 |
| select S5P_DEV_FIMC2 |
| select S5P_DEV_FIMC3 |
| select S5P_DEV_FIMD0 |
| select S5P_DEV_G2D |
| select S5P_DEV_JPEG |
| select S5P_DEV_MFC |
| select S5P_DEV_USB_EHCI |
| select S5P_GPIO_INT |
| select S5P_SETUP_MIPIPHY |
| select SAMSUNG_DEV_ADC |
| select SAMSUNG_DEV_PWM |
| help |
| Machine support for Samsung Mobile NURI Board. |
| |
| config MACH_ORIGEN |
| bool "ORIGEN" |
| select CPU_EXYNOS4210 |
| select EXYNOS4_DEV_USB_OHCI |
| select EXYNOS4_SETUP_FIMD0 |
| select EXYNOS4_SETUP_SDHCI |
| select EXYNOS4_SETUP_USB_PHY |
| select EXYNOS_DEV_DMA |
| select EXYNOS_DEV_DRM |
| select EXYNOS_DEV_SYSMMU |
| select S3C24XX_PWM |
| select S3C_DEV_HSMMC |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_RTC |
| select S3C_DEV_USB_HSOTG |
| select S3C_DEV_WDT |
| select S5P_DEV_FIMC0 |
| select S5P_DEV_FIMC1 |
| select S5P_DEV_FIMC2 |
| select S5P_DEV_FIMC3 |
| select S5P_DEV_FIMD0 |
| select S5P_DEV_G2D |
| select S5P_DEV_I2C_HDMIPHY |
| select S5P_DEV_JPEG |
| select S5P_DEV_MFC |
| select S5P_DEV_TV |
| select S5P_DEV_USB_EHCI |
| select SAMSUNG_DEV_BACKLIGHT |
| select SAMSUNG_DEV_PWM |
| help |
| Machine support for ORIGEN based on Samsung EXYNOS4210 |
| |
| comment "EXYNOS4212 Boards" |
| |
| config MACH_SMDK4212 |
| bool "SMDK4212" |
| select EXYNOS4_SETUP_FIMD0 |
| select EXYNOS4_SETUP_I2C1 |
| select EXYNOS4_SETUP_I2C3 |
| select EXYNOS4_SETUP_I2C7 |
| select EXYNOS4_SETUP_KEYPAD |
| select EXYNOS4_SETUP_SDHCI |
| select EXYNOS4_SETUP_USB_PHY |
| select EXYNOS_DEV_DMA |
| select EXYNOS_DEV_DRM |
| select EXYNOS_DEV_SYSMMU |
| select S3C24XX_PWM |
| select S3C_DEV_HSMMC2 |
| select S3C_DEV_HSMMC3 |
| select S3C_DEV_I2C1 |
| select S3C_DEV_I2C3 |
| select S3C_DEV_I2C7 |
| select S3C_DEV_RTC |
| select S3C_DEV_USB_HSOTG |
| select S3C_DEV_WDT |
| select S5P_DEV_FIMC0 |
| select S5P_DEV_FIMC1 |
| select S5P_DEV_FIMC2 |
| select S5P_DEV_FIMC3 |
| select S5P_DEV_FIMD0 |
| select S5P_DEV_MFC |
| select SAMSUNG_DEV_BACKLIGHT |
| select SAMSUNG_DEV_KEYPAD |
| select SAMSUNG_DEV_PWM |
| select SOC_EXYNOS4212 |
| help |
| Machine support for Samsung SMDK4212 |
| |
| comment "EXYNOS4412 Boards" |
| |
| config MACH_SMDK4412 |
| bool "SMDK4412" |
| select MACH_SMDK4212 |
| select SOC_EXYNOS4412 |
| help |
| Machine support for Samsung SMDK4412 |
| endif |
| |
| comment "Flattened Device Tree based board for EXYNOS SoCs" |
| |
| config MACH_EXYNOS4_DT |
| bool "Samsung Exynos4 Machine using device tree" |
| depends on ARCH_EXYNOS4 |
| select ARM_AMBA |
| select CPU_EXYNOS4210 |
| select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD |
| select PINCTRL |
| select PINCTRL_EXYNOS4 |
| select USE_OF |
| help |
| Machine support for Samsung Exynos4 machine with device tree enabled. |
| Select this if a fdt blob is available for the Exynos4 SoC based board. |
| Note: This is under development and not all peripherals can be supported |
| with this machine file. |
| |
| config MACH_EXYNOS5_DT |
| bool "SAMSUNG EXYNOS5 Machine using device tree" |
| depends on ARCH_EXYNOS5 |
| select ARM_AMBA |
| select SOC_EXYNOS5250 |
| select USE_OF |
| help |
| Machine support for Samsung EXYNOS5 machine with device tree enabled. |
| Select this if a fdt blob is available for the EXYNOS5 SoC based board. |
| |
| if ARCH_EXYNOS4 |
| |
| comment "Configuration for HSMMC 8-bit bus width" |
| |
| config EXYNOS4_SDHCI_CH0_8BIT |
| bool "Channel 0 with 8-bit bus" |
| help |
| Support HSMMC Channel 0 8-bit bus. |
| If selected, Channel 1 is disabled. |
| |
| config EXYNOS4_SDHCI_CH2_8BIT |
| bool "Channel 2 with 8-bit bus" |
| help |
| Support HSMMC Channel 2 8-bit bus. |
| If selected, Channel 3 is disabled. |
| endif |
| |
| endmenu |
| |
| endif |
