| /* |
| * linux/arch/arm/mach-clps711x/core.c |
| * |
| * Core support for the CLPS711x-based machines. |
| * |
| * Copyright (C) 2001,2011 Deep Blue Solutions Ltd |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| */ |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/irq.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| |
| #include <asm/sizes.h> |
| #include <asm/mach/map.h> |
| #include <asm/mach/time.h> |
| #include <asm/system_misc.h> |
| |
| #include <mach/hardware.h> |
| |
| static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, |
| *clk_tint, *clk_spi; |
| static unsigned long latch; |
| |
| /* |
| * This maps the generic CLPS711x registers |
| */ |
| static struct map_desc clps711x_io_desc[] __initdata = { |
| { |
| .virtual = (unsigned long)CLPS711X_VIRT_BASE, |
| .pfn = __phys_to_pfn(CLPS711X_PHYS_BASE), |
| .length = SZ_1M, |
| .type = MT_DEVICE |
| } |
| }; |
| |
| void __init clps711x_map_io(void) |
| { |
| iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc)); |
| } |
| |
| static void int1_mask(struct irq_data *d) |
| { |
| u32 intmr1; |
| |
| intmr1 = clps_readl(INTMR1); |
| intmr1 &= ~(1 << d->irq); |
| clps_writel(intmr1, INTMR1); |
| } |
| |
| static void int1_ack(struct irq_data *d) |
| { |
| switch (d->irq) { |
| case IRQ_CSINT: clps_writel(0, COEOI); break; |
| case IRQ_TC1OI: clps_writel(0, TC1EOI); break; |
| case IRQ_TC2OI: clps_writel(0, TC2EOI); break; |
| case IRQ_RTCMI: clps_writel(0, RTCEOI); break; |
| case IRQ_TINT: clps_writel(0, TEOI); break; |
| case IRQ_UMSINT: clps_writel(0, UMSEOI); break; |
| } |
| } |
| |
| static void int1_unmask(struct irq_data *d) |
| { |
| u32 intmr1; |
| |
| intmr1 = clps_readl(INTMR1); |
| intmr1 |= 1 << d->irq; |
| clps_writel(intmr1, INTMR1); |
| } |
| |
| static struct irq_chip int1_chip = { |
| .irq_ack = int1_ack, |
| .irq_mask = int1_mask, |
| .irq_unmask = int1_unmask, |
| }; |
| |
| static void int2_mask(struct irq_data *d) |
| { |
| u32 intmr2; |
| |
| intmr2 = clps_readl(INTMR2); |
| intmr2 &= ~(1 << (d->irq - 16)); |
| clps_writel(intmr2, INTMR2); |
| } |
| |
| static void int2_ack(struct irq_data *d) |
| { |
| switch (d->irq) { |
| case IRQ_KBDINT: clps_writel(0, KBDEOI); break; |
| } |
| } |
| |
| static void int2_unmask(struct irq_data *d) |
| { |
| u32 intmr2; |
| |
| intmr2 = clps_readl(INTMR2); |
| intmr2 |= 1 << (d->irq - 16); |
| clps_writel(intmr2, INTMR2); |
| } |
| |
| static struct irq_chip int2_chip = { |
| .irq_ack = int2_ack, |
| .irq_mask = int2_mask, |
| .irq_unmask = int2_unmask, |
| }; |
| |
| void __init clps711x_init_irq(void) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < NR_IRQS; i++) { |
| if (INT1_IRQS & (1 << i)) { |
| irq_set_chip_and_handler(i, &int1_chip, |
| handle_level_irq); |
| set_irq_flags(i, IRQF_VALID | IRQF_PROBE); |
| } |
| if (INT2_IRQS & (1 << i)) { |
| irq_set_chip_and_handler(i, &int2_chip, |
| handle_level_irq); |
| set_irq_flags(i, IRQF_VALID | IRQF_PROBE); |
| } |
| } |
| |
| /* |
| * Disable interrupts |
| */ |
| clps_writel(0, INTMR1); |
| clps_writel(0, INTMR2); |
| |
| /* |
| * Clear down any pending interrupts |
| */ |
| clps_writel(0, COEOI); |
| clps_writel(0, TC1EOI); |
| clps_writel(0, TC2EOI); |
| clps_writel(0, RTCEOI); |
| clps_writel(0, TEOI); |
| clps_writel(0, UMSEOI); |
| clps_writel(0, SYNCIO); |
| clps_writel(0, KBDEOI); |
| } |
| |
| /* |
| * gettimeoffset() returns time since last timer tick, in usecs. |
| * |
| * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. |
| * 'tick' is usecs per jiffy. |
| */ |
| static unsigned long clps711x_gettimeoffset(void) |
| { |
| unsigned long hwticks; |
| hwticks = latch - (clps_readl(TC2D) & 0xffff); |
| return (hwticks * (tick_nsec / 1000)) / latch; |
| } |
| |
| /* |
| * IRQ handler for the timer |
| */ |
| static irqreturn_t p720t_timer_interrupt(int irq, void *dev_id) |
| { |
| timer_tick(); |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction clps711x_timer_irq = { |
| .name = "CLPS711x Timer Tick", |
| .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, |
| .handler = p720t_timer_interrupt, |
| }; |
| |
| static void add_fixed_clk(struct clk *clk, const char *name, int rate) |
| { |
| clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); |
| clk_register_clkdev(clk, name, NULL); |
| } |
| |
| static void __init clps711x_timer_init(void) |
| { |
| int osc, ext, pll, cpu, bus, timl, timh, uart, spi; |
| u32 tmp; |
| |
| osc = 3686400; |
| ext = 13000000; |
| |
| tmp = clps_readl(PLLR) >> 24; |
| if (tmp) |
| pll = (osc * tmp) / 2; |
| else |
| pll = 73728000; /* Default value */ |
| |
| tmp = clps_readl(SYSFLG2); |
| if (tmp & SYSFLG2_CKMODE) { |
| cpu = ext; |
| bus = cpu; |
| spi = 135400; |
| } else { |
| cpu = pll; |
| if (cpu >= 36864000) |
| bus = cpu / 2; |
| else |
| bus = 36864000 / 2; |
| spi = cpu / 576; |
| } |
| |
| uart = bus / 10; |
| |
| if (tmp & SYSFLG2_CKMODE) { |
| tmp = clps_readl(SYSCON2); |
| if (tmp & SYSCON2_OSTB) |
| timh = ext / 26; |
| else |
| timh = 541440; |
| } else |
| timh = cpu / 144; |
| |
| timl = timh / 256; |
| |
| /* All clocks are fixed */ |
| add_fixed_clk(clk_pll, "pll", pll); |
| add_fixed_clk(clk_bus, "bus", bus); |
| add_fixed_clk(clk_uart, "uart", uart); |
| add_fixed_clk(clk_timerl, "timer_lf", timl); |
| add_fixed_clk(clk_timerh, "timer_hf", timh); |
| add_fixed_clk(clk_tint, "tint", 64); |
| add_fixed_clk(clk_spi, "spi", spi); |
| |
| pr_info("CPU frequency set at %i Hz.\n", cpu); |
| |
| latch = (timh + HZ / 2) / HZ; |
| |
| tmp = clps_readl(SYSCON1); |
| tmp |= SYSCON1_TC2S | SYSCON1_TC2M; |
| clps_writel(tmp, SYSCON1); |
| |
| clps_writel(latch - 1, TC2D); |
| |
| setup_irq(IRQ_TC2OI, &clps711x_timer_irq); |
| } |
| |
| struct sys_timer clps711x_timer = { |
| .init = clps711x_timer_init, |
| .offset = clps711x_gettimeoffset, |
| }; |
| |
| void clps711x_restart(char mode, const char *cmd) |
| { |
| soft_restart(0); |
| } |
| |
| static void clps711x_idle(void) |
| { |
| clps_writel(1, HALT); |
| __asm__ __volatile__( |
| "mov r0, r0\n\ |
| mov r0, r0"); |
| } |
| |
| static int __init clps711x_idle_init(void) |
| { |
| arm_pm_idle = clps711x_idle; |
| return 0; |
| } |
| |
| arch_initcall(clps711x_idle_init); |