| /* |
| * Driver for MT9M001 CMOS Image Sensor from Micron |
| * |
| * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/videodev2.h> |
| #include <linux/slab.h> |
| #include <linux/i2c.h> |
| #include <linux/log2.h> |
| |
| #include <media/v4l2-subdev.h> |
| #include <media/v4l2-chip-ident.h> |
| #include <media/soc_camera.h> |
| |
| /* mt9m001 i2c address 0x5d |
| * The platform has to define ctruct i2c_board_info objects and link to them |
| * from struct soc_camera_link */ |
| |
| /* mt9m001 selected register addresses */ |
| #define MT9M001_CHIP_VERSION 0x00 |
| #define MT9M001_ROW_START 0x01 |
| #define MT9M001_COLUMN_START 0x02 |
| #define MT9M001_WINDOW_HEIGHT 0x03 |
| #define MT9M001_WINDOW_WIDTH 0x04 |
| #define MT9M001_HORIZONTAL_BLANKING 0x05 |
| #define MT9M001_VERTICAL_BLANKING 0x06 |
| #define MT9M001_OUTPUT_CONTROL 0x07 |
| #define MT9M001_SHUTTER_WIDTH 0x09 |
| #define MT9M001_FRAME_RESTART 0x0b |
| #define MT9M001_SHUTTER_DELAY 0x0c |
| #define MT9M001_RESET 0x0d |
| #define MT9M001_READ_OPTIONS1 0x1e |
| #define MT9M001_READ_OPTIONS2 0x20 |
| #define MT9M001_GLOBAL_GAIN 0x35 |
| #define MT9M001_CHIP_ENABLE 0xF1 |
| |
| static const struct soc_camera_data_format mt9m001_colour_formats[] = { |
| /* Order important: first natively supported, |
| * second supported with a GPIO extender */ |
| { |
| .name = "Bayer (sRGB) 10 bit", |
| .depth = 10, |
| .fourcc = V4L2_PIX_FMT_SBGGR16, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| }, { |
| .name = "Bayer (sRGB) 8 bit", |
| .depth = 8, |
| .fourcc = V4L2_PIX_FMT_SBGGR8, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| } |
| }; |
| |
| static const struct soc_camera_data_format mt9m001_monochrome_formats[] = { |
| /* Order important - see above */ |
| { |
| .name = "Monochrome 10 bit", |
| .depth = 10, |
| .fourcc = V4L2_PIX_FMT_Y16, |
| }, { |
| .name = "Monochrome 8 bit", |
| .depth = 8, |
| .fourcc = V4L2_PIX_FMT_GREY, |
| }, |
| }; |
| |
| struct mt9m001 { |
| struct v4l2_subdev subdev; |
| int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */ |
| unsigned char autoexposure; |
| }; |
| |
| static struct mt9m001 *to_mt9m001(const struct i2c_client *client) |
| { |
| return container_of(i2c_get_clientdata(client), struct mt9m001, subdev); |
| } |
| |
| static int reg_read(struct i2c_client *client, const u8 reg) |
| { |
| s32 data = i2c_smbus_read_word_data(client, reg); |
| return data < 0 ? data : swab16(data); |
| } |
| |
| static int reg_write(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| return i2c_smbus_write_word_data(client, reg, swab16(data)); |
| } |
| |
| static int reg_set(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| int ret; |
| |
| ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, ret | data); |
| } |
| |
| static int reg_clear(struct i2c_client *client, const u8 reg, |
| const u16 data) |
| { |
| int ret; |
| |
| ret = reg_read(client, reg); |
| if (ret < 0) |
| return ret; |
| return reg_write(client, reg, ret & ~data); |
| } |
| |
| static int mt9m001_init(struct soc_camera_device *icd) |
| { |
| struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); |
| int ret; |
| |
| dev_dbg(&icd->dev, "%s\n", __func__); |
| |
| /* |
| * We don't know, whether platform provides reset, |
| * issue a soft reset too |
| */ |
| ret = reg_write(client, MT9M001_RESET, 1); |
| if (!ret) |
| ret = reg_write(client, MT9M001_RESET, 0); |
| |
| /* Disable chip, synchronous option update */ |
| if (!ret) |
| ret = reg_write(client, MT9M001_OUTPUT_CONTROL, 0); |
| |
| return ret; |
| } |
| |
| static int mt9m001_release(struct soc_camera_device *icd) |
| { |
| struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); |
| |
| /* Disable the chip */ |
| reg_write(client, MT9M001_OUTPUT_CONTROL, 0); |
| |
| return 0; |
| } |
| |
| static int mt9m001_s_stream(struct v4l2_subdev *sd, int enable) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| /* Switch to master "normal" mode or stop sensor readout */ |
| if (reg_write(client, MT9M001_OUTPUT_CONTROL, enable ? 2 : 0) < 0) |
| return -EIO; |
| return 0; |
| } |
| |
| static int mt9m001_set_bus_param(struct soc_camera_device *icd, |
| unsigned long flags) |
| { |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| unsigned long width_flag = flags & SOCAM_DATAWIDTH_MASK; |
| |
| /* Only one width bit may be set */ |
| if (!is_power_of_2(width_flag)) |
| return -EINVAL; |
| |
| if (icl->set_bus_param) |
| return icl->set_bus_param(icl, width_flag); |
| |
| /* |
| * Without board specific bus width settings we only support the |
| * sensors native bus width |
| */ |
| if (width_flag == SOCAM_DATAWIDTH_10) |
| return 0; |
| |
| return -EINVAL; |
| } |
| |
| static unsigned long mt9m001_query_bus_param(struct soc_camera_device *icd) |
| { |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| /* MT9M001 has all capture_format parameters fixed */ |
| unsigned long flags = SOCAM_PCLK_SAMPLE_FALLING | |
| SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | |
| SOCAM_DATA_ACTIVE_HIGH | SOCAM_MASTER; |
| |
| if (icl->query_bus_param) |
| flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK; |
| else |
| flags |= SOCAM_DATAWIDTH_10; |
| |
| return soc_camera_apply_sensor_flags(icl, flags); |
| } |
| |
| static int mt9m001_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a) |
| { |
| struct v4l2_rect *rect = &a->c; |
| struct i2c_client *client = sd->priv; |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct soc_camera_device *icd = client->dev.platform_data; |
| int ret; |
| const u16 hblank = 9, vblank = 25; |
| |
| /* Blanking and start values - default... */ |
| ret = reg_write(client, MT9M001_HORIZONTAL_BLANKING, hblank); |
| if (!ret) |
| ret = reg_write(client, MT9M001_VERTICAL_BLANKING, vblank); |
| |
| /* The caller provides a supported format, as verified per |
| * call to icd->try_fmt() */ |
| if (!ret) |
| ret = reg_write(client, MT9M001_COLUMN_START, rect->left); |
| if (!ret) |
| ret = reg_write(client, MT9M001_ROW_START, rect->top); |
| if (!ret) |
| ret = reg_write(client, MT9M001_WINDOW_WIDTH, rect->width - 1); |
| if (!ret) |
| ret = reg_write(client, MT9M001_WINDOW_HEIGHT, |
| rect->height + icd->y_skip_top - 1); |
| if (!ret && mt9m001->autoexposure) { |
| ret = reg_write(client, MT9M001_SHUTTER_WIDTH, |
| rect->height + icd->y_skip_top + vblank); |
| if (!ret) { |
| const struct v4l2_queryctrl *qctrl = |
| soc_camera_find_qctrl(icd->ops, |
| V4L2_CID_EXPOSURE); |
| icd->exposure = (524 + (rect->height + icd->y_skip_top + |
| vblank - 1) * |
| (qctrl->maximum - qctrl->minimum)) / |
| 1048 + qctrl->minimum; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int mt9m001_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct i2c_client *client = sd->priv; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct v4l2_crop a = { |
| .c = { |
| .left = icd->rect_current.left, |
| .top = icd->rect_current.top, |
| .width = f->fmt.pix.width, |
| .height = f->fmt.pix.height, |
| }, |
| }; |
| |
| /* No support for scaling so far, just crop. TODO: use skipping */ |
| return mt9m001_s_crop(sd, &a); |
| } |
| |
| static int mt9m001_try_fmt(struct v4l2_subdev *sd, struct v4l2_format *f) |
| { |
| struct i2c_client *client = sd->priv; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct v4l2_pix_format *pix = &f->fmt.pix; |
| |
| v4l_bound_align_image(&pix->width, 48, 1280, 1, |
| &pix->height, 32 + icd->y_skip_top, |
| 1024 + icd->y_skip_top, 0, 0); |
| |
| return 0; |
| } |
| |
| static int mt9m001_g_chip_ident(struct v4l2_subdev *sd, |
| struct v4l2_dbg_chip_ident *id) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| |
| if (id->match.type != V4L2_CHIP_MATCH_I2C_ADDR) |
| return -EINVAL; |
| |
| if (id->match.addr != client->addr) |
| return -ENODEV; |
| |
| id->ident = mt9m001->model; |
| id->revision = 0; |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| static int mt9m001_g_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| reg->size = 2; |
| reg->val = reg_read(client, reg->reg); |
| |
| if (reg->val > 0xffff) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| static int mt9m001_s_register(struct v4l2_subdev *sd, |
| struct v4l2_dbg_register *reg) |
| { |
| struct i2c_client *client = sd->priv; |
| |
| if (reg->match.type != V4L2_CHIP_MATCH_I2C_ADDR || reg->reg > 0xff) |
| return -EINVAL; |
| |
| if (reg->match.addr != client->addr) |
| return -ENODEV; |
| |
| if (reg_write(client, reg->reg, reg->val) < 0) |
| return -EIO; |
| |
| return 0; |
| } |
| #endif |
| |
| static const struct v4l2_queryctrl mt9m001_controls[] = { |
| { |
| .id = V4L2_CID_VFLIP, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Flip Vertically", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 0, |
| }, { |
| .id = V4L2_CID_GAIN, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Gain", |
| .minimum = 0, |
| .maximum = 127, |
| .step = 1, |
| .default_value = 64, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .id = V4L2_CID_EXPOSURE, |
| .type = V4L2_CTRL_TYPE_INTEGER, |
| .name = "Exposure", |
| .minimum = 1, |
| .maximum = 255, |
| .step = 1, |
| .default_value = 255, |
| .flags = V4L2_CTRL_FLAG_SLIDER, |
| }, { |
| .id = V4L2_CID_EXPOSURE_AUTO, |
| .type = V4L2_CTRL_TYPE_BOOLEAN, |
| .name = "Automatic Exposure", |
| .minimum = 0, |
| .maximum = 1, |
| .step = 1, |
| .default_value = 1, |
| } |
| }; |
| |
| static struct soc_camera_ops mt9m001_ops = { |
| .init = mt9m001_init, |
| .release = mt9m001_release, |
| .set_bus_param = mt9m001_set_bus_param, |
| .query_bus_param = mt9m001_query_bus_param, |
| .controls = mt9m001_controls, |
| .num_controls = ARRAY_SIZE(mt9m001_controls), |
| }; |
| |
| static int mt9m001_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| int data; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| data = reg_read(client, MT9M001_READ_OPTIONS2); |
| if (data < 0) |
| return -EIO; |
| ctrl->value = !!(data & 0x8000); |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| ctrl->value = mt9m001->autoexposure; |
| break; |
| } |
| return 0; |
| } |
| |
| static int mt9m001_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) |
| { |
| struct i2c_client *client = sd->priv; |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct soc_camera_device *icd = client->dev.platform_data; |
| const struct v4l2_queryctrl *qctrl; |
| int data; |
| |
| qctrl = soc_camera_find_qctrl(&mt9m001_ops, ctrl->id); |
| |
| if (!qctrl) |
| return -EINVAL; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_VFLIP: |
| if (ctrl->value) |
| data = reg_set(client, MT9M001_READ_OPTIONS2, 0x8000); |
| else |
| data = reg_clear(client, MT9M001_READ_OPTIONS2, 0x8000); |
| if (data < 0) |
| return -EIO; |
| break; |
| case V4L2_CID_GAIN: |
| if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) |
| return -EINVAL; |
| /* See Datasheet Table 7, Gain settings. */ |
| if (ctrl->value <= qctrl->default_value) { |
| /* Pack it into 0..1 step 0.125, register values 0..8 */ |
| unsigned long range = qctrl->default_value - qctrl->minimum; |
| data = ((ctrl->value - qctrl->minimum) * 8 + range / 2) / range; |
| |
| dev_dbg(&icd->dev, "Setting gain %d\n", data); |
| data = reg_write(client, MT9M001_GLOBAL_GAIN, data); |
| if (data < 0) |
| return -EIO; |
| } else { |
| /* Pack it into 1.125..15 variable step, register values 9..67 */ |
| /* We assume qctrl->maximum - qctrl->default_value - 1 > 0 */ |
| unsigned long range = qctrl->maximum - qctrl->default_value - 1; |
| unsigned long gain = ((ctrl->value - qctrl->default_value - 1) * |
| 111 + range / 2) / range + 9; |
| |
| if (gain <= 32) |
| data = gain; |
| else if (gain <= 64) |
| data = ((gain - 32) * 16 + 16) / 32 + 80; |
| else |
| data = ((gain - 64) * 7 + 28) / 56 + 96; |
| |
| dev_dbg(&icd->dev, "Setting gain from %d to %d\n", |
| reg_read(client, MT9M001_GLOBAL_GAIN), data); |
| data = reg_write(client, MT9M001_GLOBAL_GAIN, data); |
| if (data < 0) |
| return -EIO; |
| } |
| |
| /* Success */ |
| icd->gain = ctrl->value; |
| break; |
| case V4L2_CID_EXPOSURE: |
| /* mt9m001 has maximum == default */ |
| if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum) |
| return -EINVAL; |
| else { |
| unsigned long range = qctrl->maximum - qctrl->minimum; |
| unsigned long shutter = ((ctrl->value - qctrl->minimum) * 1048 + |
| range / 2) / range + 1; |
| |
| dev_dbg(&icd->dev, "Setting shutter width from %d to %lu\n", |
| reg_read(client, MT9M001_SHUTTER_WIDTH), shutter); |
| if (reg_write(client, MT9M001_SHUTTER_WIDTH, shutter) < 0) |
| return -EIO; |
| icd->exposure = ctrl->value; |
| mt9m001->autoexposure = 0; |
| } |
| break; |
| case V4L2_CID_EXPOSURE_AUTO: |
| if (ctrl->value) { |
| const u16 vblank = 25; |
| if (reg_write(client, MT9M001_SHUTTER_WIDTH, |
| icd->rect_current.height + |
| icd->y_skip_top + vblank) < 0) |
| return -EIO; |
| qctrl = soc_camera_find_qctrl(icd->ops, V4L2_CID_EXPOSURE); |
| icd->exposure = (524 + (icd->rect_current.height + |
| icd->y_skip_top + vblank - 1) * |
| (qctrl->maximum - qctrl->minimum)) / |
| 1048 + qctrl->minimum; |
| mt9m001->autoexposure = 1; |
| } else |
| mt9m001->autoexposure = 0; |
| break; |
| } |
| return 0; |
| } |
| |
| /* Interface active, can use i2c. If it fails, it can indeed mean, that |
| * this wasn't our capture interface, so, we wait for the right one */ |
| static int mt9m001_video_probe(struct soc_camera_device *icd, |
| struct i2c_client *client) |
| { |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| s32 data; |
| unsigned long flags; |
| |
| /* We must have a parent by now. And it cannot be a wrong one. |
| * So this entire test is completely redundant. */ |
| if (!icd->dev.parent || |
| to_soc_camera_host(icd->dev.parent)->nr != icd->iface) |
| return -ENODEV; |
| |
| /* Enable the chip */ |
| data = reg_write(client, MT9M001_CHIP_ENABLE, 1); |
| dev_dbg(&icd->dev, "write: %d\n", data); |
| |
| /* Read out the chip version register */ |
| data = reg_read(client, MT9M001_CHIP_VERSION); |
| |
| /* must be 0x8411 or 0x8421 for colour sensor and 8431 for bw */ |
| switch (data) { |
| case 0x8411: |
| case 0x8421: |
| mt9m001->model = V4L2_IDENT_MT9M001C12ST; |
| icd->formats = mt9m001_colour_formats; |
| break; |
| case 0x8431: |
| mt9m001->model = V4L2_IDENT_MT9M001C12STM; |
| icd->formats = mt9m001_monochrome_formats; |
| break; |
| default: |
| dev_err(&icd->dev, |
| "No MT9M001 chip detected, register read %x\n", data); |
| return -ENODEV; |
| } |
| |
| icd->num_formats = 0; |
| |
| /* |
| * This is a 10bit sensor, so by default we only allow 10bit. |
| * The platform may support different bus widths due to |
| * different routing of the data lines. |
| */ |
| if (icl->query_bus_param) |
| flags = icl->query_bus_param(icl); |
| else |
| flags = SOCAM_DATAWIDTH_10; |
| |
| if (flags & SOCAM_DATAWIDTH_10) |
| icd->num_formats++; |
| else |
| icd->formats++; |
| |
| if (flags & SOCAM_DATAWIDTH_8) |
| icd->num_formats++; |
| |
| dev_info(&icd->dev, "Detected a MT9M001 chip ID %x (%s)\n", data, |
| data == 0x8431 ? "C12STM" : "C12ST"); |
| |
| return 0; |
| } |
| |
| static void mt9m001_video_remove(struct soc_camera_device *icd) |
| { |
| struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd)); |
| struct soc_camera_link *icl = to_soc_camera_link(icd); |
| |
| dev_dbg(&icd->dev, "Video %x removed: %p, %p\n", client->addr, |
| icd->dev.parent, icd->vdev); |
| if (icl->free_bus) |
| icl->free_bus(icl); |
| } |
| |
| static struct v4l2_subdev_core_ops mt9m001_subdev_core_ops = { |
| .g_ctrl = mt9m001_g_ctrl, |
| .s_ctrl = mt9m001_s_ctrl, |
| .g_chip_ident = mt9m001_g_chip_ident, |
| #ifdef CONFIG_VIDEO_ADV_DEBUG |
| .g_register = mt9m001_g_register, |
| .s_register = mt9m001_s_register, |
| #endif |
| }; |
| |
| static struct v4l2_subdev_video_ops mt9m001_subdev_video_ops = { |
| .s_stream = mt9m001_s_stream, |
| .s_fmt = mt9m001_s_fmt, |
| .try_fmt = mt9m001_try_fmt, |
| .s_crop = mt9m001_s_crop, |
| }; |
| |
| static struct v4l2_subdev_ops mt9m001_subdev_ops = { |
| .core = &mt9m001_subdev_core_ops, |
| .video = &mt9m001_subdev_video_ops, |
| }; |
| |
| static int mt9m001_probe(struct i2c_client *client, |
| const struct i2c_device_id *did) |
| { |
| struct mt9m001 *mt9m001; |
| struct soc_camera_device *icd = client->dev.platform_data; |
| struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); |
| struct soc_camera_link *icl; |
| int ret; |
| |
| if (!icd) { |
| dev_err(&client->dev, "MT9M001: missing soc-camera data!\n"); |
| return -EINVAL; |
| } |
| |
| icl = to_soc_camera_link(icd); |
| if (!icl) { |
| dev_err(&client->dev, "MT9M001 driver needs platform data\n"); |
| return -EINVAL; |
| } |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) { |
| dev_warn(&adapter->dev, |
| "I2C-Adapter doesn't support I2C_FUNC_SMBUS_WORD\n"); |
| return -EIO; |
| } |
| |
| mt9m001 = kzalloc(sizeof(struct mt9m001), GFP_KERNEL); |
| if (!mt9m001) |
| return -ENOMEM; |
| |
| v4l2_i2c_subdev_init(&mt9m001->subdev, client, &mt9m001_subdev_ops); |
| |
| /* Second stage probe - when a capture adapter is there */ |
| icd->ops = &mt9m001_ops; |
| icd->rect_max.left = 20; |
| icd->rect_max.top = 12; |
| icd->rect_max.width = 1280; |
| icd->rect_max.height = 1024; |
| icd->rect_current.left = 20; |
| icd->rect_current.top = 12; |
| icd->width_min = 48; |
| icd->height_min = 32; |
| icd->y_skip_top = 1; |
| /* Simulated autoexposure. If enabled, we calculate shutter width |
| * ourselves in the driver based on vertical blanking and frame width */ |
| mt9m001->autoexposure = 1; |
| |
| ret = mt9m001_video_probe(icd, client); |
| if (ret) { |
| icd->ops = NULL; |
| i2c_set_clientdata(client, NULL); |
| kfree(mt9m001); |
| } |
| |
| return ret; |
| } |
| |
| static int mt9m001_remove(struct i2c_client *client) |
| { |
| struct mt9m001 *mt9m001 = to_mt9m001(client); |
| struct soc_camera_device *icd = client->dev.platform_data; |
| |
| icd->ops = NULL; |
| mt9m001_video_remove(icd); |
| i2c_set_clientdata(client, NULL); |
| client->driver = NULL; |
| kfree(mt9m001); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id mt9m001_id[] = { |
| { "mt9m001", 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, mt9m001_id); |
| |
| static struct i2c_driver mt9m001_i2c_driver = { |
| .driver = { |
| .name = "mt9m001", |
| }, |
| .probe = mt9m001_probe, |
| .remove = mt9m001_remove, |
| .id_table = mt9m001_id, |
| }; |
| |
| static int __init mt9m001_mod_init(void) |
| { |
| return i2c_add_driver(&mt9m001_i2c_driver); |
| } |
| |
| static void __exit mt9m001_mod_exit(void) |
| { |
| i2c_del_driver(&mt9m001_i2c_driver); |
| } |
| |
| module_init(mt9m001_mod_init); |
| module_exit(mt9m001_mod_exit); |
| |
| MODULE_DESCRIPTION("Micron MT9M001 Camera driver"); |
| MODULE_AUTHOR("Guennadi Liakhovetski <kernel@pengutronix.de>"); |
| MODULE_LICENSE("GPL"); |