| /****************************************************************************** |
| * |
| * This file is provided under a dual BSD/GPLv2 license. When using or |
| * redistributing this file, you may do so under either license. |
| * |
| * GPL LICENSE SUMMARY |
| * |
| * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, |
| * USA |
| * |
| * The full GNU General Public License is included in this distribution |
| * in the file called LICENSE.GPL. |
| * |
| * Contact Information: |
| * Intel Linux Wireless <ilw@linux.intel.com> |
| * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| * |
| * BSD LICENSE |
| * |
| * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * * Neither the name Intel Corporation nor the names of its |
| * contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| *****************************************************************************/ |
| |
| #ifndef __iwl_eeprom_h__ |
| #define __iwl_eeprom_h__ |
| |
| #include <net/mac80211.h> |
| |
| struct iwl_priv; |
| |
| /* |
| * EEPROM access time values: |
| * |
| * Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG. |
| * Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1). |
| * When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec. |
| * Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG. |
| */ |
| #define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */ |
| |
| #define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */ |
| #define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */ |
| |
| |
| /* |
| * Regulatory channel usage flags in EEPROM struct iwl4965_eeprom_channel.flags. |
| * |
| * IBSS and/or AP operation is allowed *only* on those channels with |
| * (VALID && IBSS && ACTIVE && !RADAR). This restriction is in place because |
| * RADAR detection is not supported by the 4965 driver, but is a |
| * requirement for establishing a new network for legal operation on channels |
| * requiring RADAR detection or restricting ACTIVE scanning. |
| * |
| * NOTE: "WIDE" flag does not indicate anything about "HT40" 40 MHz channels. |
| * It only indicates that 20 MHz channel use is supported; HT40 channel |
| * usage is indicated by a separate set of regulatory flags for each |
| * HT40 channel pair. |
| * |
| * NOTE: Using a channel inappropriately will result in a uCode error! |
| */ |
| #define IWL_NUM_TX_CALIB_GROUPS 5 |
| enum { |
| EEPROM_CHANNEL_VALID = (1 << 0), /* usable for this SKU/geo */ |
| EEPROM_CHANNEL_IBSS = (1 << 1), /* usable as an IBSS channel */ |
| /* Bit 2 Reserved */ |
| EEPROM_CHANNEL_ACTIVE = (1 << 3), /* active scanning allowed */ |
| EEPROM_CHANNEL_RADAR = (1 << 4), /* radar detection required */ |
| EEPROM_CHANNEL_WIDE = (1 << 5), /* 20 MHz channel okay */ |
| /* Bit 6 Reserved (was Narrow Channel) */ |
| EEPROM_CHANNEL_DFS = (1 << 7), /* dynamic freq selection candidate */ |
| }; |
| |
| /* SKU Capabilities */ |
| #define EEPROM_SKU_CAP_BAND_24GHZ (1 << 4) |
| #define EEPROM_SKU_CAP_BAND_52GHZ (1 << 5) |
| #define EEPROM_SKU_CAP_11N_ENABLE (1 << 6) |
| #define EEPROM_SKU_CAP_AMT_ENABLE (1 << 7) |
| #define EEPROM_SKU_CAP_IPAN_ENABLE (1 << 8) |
| |
| /* *regulatory* channel data format in eeprom, one for each channel. |
| * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */ |
| struct iwl_eeprom_channel { |
| u8 flags; /* EEPROM_CHANNEL_* flags copied from EEPROM */ |
| s8 max_power_avg; /* max power (dBm) on this chnl, limit 31 */ |
| } __packed; |
| |
| enum iwl_eeprom_enhanced_txpwr_flags { |
| IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0), |
| IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1), |
| IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2), |
| IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3), |
| IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4), |
| IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5), |
| IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6), |
| IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7), |
| }; |
| |
| /** |
| * iwl_eeprom_enhanced_txpwr structure |
| * This structure presents the enhanced regulatory tx power limit layout |
| * in eeprom image |
| * Enhanced regulatory tx power portion of eeprom image can be broken down |
| * into individual structures; each one is 8 bytes in size and contain the |
| * following information |
| * @flags: entry flags |
| * @channel: channel number |
| * @chain_a_max_pwr: chain a max power in 1/2 dBm |
| * @chain_b_max_pwr: chain b max power in 1/2 dBm |
| * @chain_c_max_pwr: chain c max power in 1/2 dBm |
| * @delta_20_in_40: 20-in-40 deltas (hi/lo) |
| * @mimo2_max_pwr: mimo2 max power in 1/2 dBm |
| * @mimo3_max_pwr: mimo3 max power in 1/2 dBm |
| * |
| */ |
| struct iwl_eeprom_enhanced_txpwr { |
| u8 flags; |
| u8 channel; |
| s8 chain_a_max; |
| s8 chain_b_max; |
| s8 chain_c_max; |
| u8 delta_20_in_40; |
| s8 mimo2_max; |
| s8 mimo3_max; |
| } __packed; |
| |
| /* calibration */ |
| #define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION) |
| #define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL) |
| |
| /* temperature */ |
| #define EEPROM_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL) |
| |
| /* agn links */ |
| #define EEPROM_LINK_HOST (2*0x64) |
| #define EEPROM_LINK_GENERAL (2*0x65) |
| #define EEPROM_LINK_REGULATORY (2*0x66) |
| #define EEPROM_LINK_CALIBRATION (2*0x67) |
| #define EEPROM_LINK_PROCESS_ADJST (2*0x68) |
| #define EEPROM_LINK_OTHERS (2*0x69) |
| #define EEPROM_LINK_TXP_LIMIT (2*0x6a) |
| #define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b) |
| |
| /* agn regulatory - indirect access */ |
| #define EEPROM_REG_BAND_1_CHANNELS ((0x08)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 28 bytes */ |
| #define EEPROM_REG_BAND_2_CHANNELS ((0x26)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 26 bytes */ |
| #define EEPROM_REG_BAND_3_CHANNELS ((0x42)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 24 bytes */ |
| #define EEPROM_REG_BAND_4_CHANNELS ((0x5C)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ |
| #define EEPROM_REG_BAND_5_CHANNELS ((0x74)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 12 bytes */ |
| #define EEPROM_REG_BAND_24_HT40_CHANNELS ((0x82)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ |
| #define EEPROM_REG_BAND_52_HT40_CHANNELS ((0x92)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 22 bytes */ |
| |
| /* 6000 regulatory - indirect access */ |
| #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS ((0x80)\ |
| | INDIRECT_ADDRESS | INDIRECT_REGULATORY) /* 14 bytes */ |
| |
| /* 5000 Specific */ |
| #define EEPROM_5000_TX_POWER_VERSION (4) |
| #define EEPROM_5000_EEPROM_VERSION (0x11A) |
| |
| /* 5050 Specific */ |
| #define EEPROM_5050_TX_POWER_VERSION (4) |
| #define EEPROM_5050_EEPROM_VERSION (0x21E) |
| |
| /* 1000 Specific */ |
| #define EEPROM_1000_TX_POWER_VERSION (4) |
| #define EEPROM_1000_EEPROM_VERSION (0x15C) |
| |
| /* 6x00 Specific */ |
| #define EEPROM_6000_TX_POWER_VERSION (4) |
| #define EEPROM_6000_EEPROM_VERSION (0x423) |
| |
| /* 6x50 Specific */ |
| #define EEPROM_6050_TX_POWER_VERSION (4) |
| #define EEPROM_6050_EEPROM_VERSION (0x532) |
| |
| /* 6150 Specific */ |
| #define EEPROM_6150_TX_POWER_VERSION (6) |
| #define EEPROM_6150_EEPROM_VERSION (0x553) |
| |
| /* 6x05 Specific */ |
| #define EEPROM_6005_TX_POWER_VERSION (6) |
| #define EEPROM_6005_EEPROM_VERSION (0x709) |
| |
| /* 6x30 Specific */ |
| #define EEPROM_6030_TX_POWER_VERSION (6) |
| #define EEPROM_6030_EEPROM_VERSION (0x709) |
| |
| /* 2x00 Specific */ |
| #define EEPROM_2000_TX_POWER_VERSION (6) |
| #define EEPROM_2000_EEPROM_VERSION (0x805) |
| |
| /* 6x35 Specific */ |
| #define EEPROM_6035_TX_POWER_VERSION (6) |
| #define EEPROM_6035_EEPROM_VERSION (0x753) |
| |
| |
| /* OTP */ |
| /* lower blocks contain EEPROM image and calibration data */ |
| #define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ |
| /* high blocks contain PAPD data */ |
| #define OTP_HIGH_IMAGE_SIZE_6x00 (6 * 512 * sizeof(u16)) /* 6 KB */ |
| #define OTP_HIGH_IMAGE_SIZE_1000 (0x200 * sizeof(u16)) /* 1024 bytes */ |
| #define OTP_MAX_LL_ITEMS_1000 (3) /* OTP blocks for 1000 */ |
| #define OTP_MAX_LL_ITEMS_6x00 (4) /* OTP blocks for 6x00 */ |
| #define OTP_MAX_LL_ITEMS_6x50 (7) /* OTP blocks for 6x50 */ |
| #define OTP_MAX_LL_ITEMS_2x00 (4) /* OTP blocks for 2x00 */ |
| |
| /* 2.4 GHz */ |
| extern const u8 iwl_eeprom_band_1[14]; |
| |
| #define ADDRESS_MSK 0x0000FFFF |
| #define INDIRECT_TYPE_MSK 0x000F0000 |
| #define INDIRECT_HOST 0x00010000 |
| #define INDIRECT_GENERAL 0x00020000 |
| #define INDIRECT_REGULATORY 0x00030000 |
| #define INDIRECT_CALIBRATION 0x00040000 |
| #define INDIRECT_PROCESS_ADJST 0x00050000 |
| #define INDIRECT_OTHERS 0x00060000 |
| #define INDIRECT_TXP_LIMIT 0x00070000 |
| #define INDIRECT_TXP_LIMIT_SIZE 0x00080000 |
| #define INDIRECT_ADDRESS 0x00100000 |
| |
| /* General */ |
| #define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */ |
| #define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */ |
| #define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */ |
| #define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */ |
| #define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */ |
| #define EEPROM_VERSION (2*0x44) /* 2 bytes */ |
| #define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */ |
| #define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */ |
| #define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */ |
| #define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */ |
| |
| /* The following masks are to be applied on EEPROM_RADIO_CONFIG */ |
| #define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */ |
| #define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */ |
| #define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */ |
| #define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */ |
| #define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */ |
| #define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */ |
| |
| #define EEPROM_RF_CONFIG_TYPE_MAX 0x3 |
| |
| #define EEPROM_REGULATORY_BAND_NO_HT40 (0) |
| |
| struct iwl_eeprom_ops { |
| const u32 regulatory_bands[7]; |
| void (*update_enhanced_txpower) (struct iwl_priv *priv); |
| }; |
| |
| |
| int iwl_eeprom_init(struct iwl_priv *priv, u32 hw_rev); |
| void iwl_eeprom_free(struct iwl_priv *priv); |
| int iwl_eeprom_check_version(struct iwl_priv *priv); |
| int iwl_eeprom_check_sku(struct iwl_priv *priv); |
| const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset); |
| int iwlcore_eeprom_verify_signature(struct iwl_priv *priv); |
| u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset); |
| int iwl_init_channel_map(struct iwl_priv *priv); |
| void iwl_free_channel_map(struct iwl_priv *priv); |
| const struct iwl_channel_info *iwl_get_channel_info( |
| const struct iwl_priv *priv, |
| enum ieee80211_band band, u16 channel); |
| void iwl_rf_config(struct iwl_priv *priv); |
| |
| #endif /* __iwl_eeprom_h__ */ |
