Merge tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull arm-soc fixes from Arnd Bergmann:
"Bug fixes for a number of ARM platforms, mostly OMAP, imx and at91.
These come a little later than I had hoped but unfortunately we had a
few of these patches cause regressions themselves and had to work out
how to deal with those in the meantime."
* tag 'fixes-for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
Revert "ARM i.MX25: Fix PWM per clock lookups"
ARM: versatile: fix versatile_defconfig
ARM: mvebu: update defconfig with 3.7 changes
ARM: at91: fix at91x40 build
ARM: socfpga: Fix socfpga compilation with early_printk() enabled
ARM: SPEAr: Remove unused empty files
MAINTAINERS: Add arm-soc tree entry
ARM: dts: mxs: add the "clock-names" for gpmi-nand
ARM: ux500: Correct SDI5 address and add some format changes
ARM: ux500: Specify AMBA Primecell IDs for Nomadik I2C in DT
ARM: ux500: Fix build error relating to IRQCHIP_SKIP_SET_WAKE
ARM: at91: drop duplicated config SOC_AT91SAM9 entry
ARM: at91/i2c: change id to let i2c-at91 work
ARM: at91/i2c: change id to let i2c-gpio work
ARM: at91/dts: at91sam9g20ek_common: Fix typos in buttons labels.
ARM: at91: fix external interrupt specification in board code
ARM: at91: fix external interrupts in non-DT case
ARM: at91: at91sam9g10: fix SOC type detection
ARM: at91/tc: fix typo in the DT document
ARM: AM33XX: Fix configuration of dmtimer parent clock by dmtimer driverDate:Wed, 17 Oct 2012 13:55:55 -0500
...
diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index ecc81e3..d187e9f 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -8,7 +8,7 @@
shared across all System Controller members.
TC/TCLIB Timer required properties:
-- compatible: Should be "atmel,<chip>-pit".
+- compatible: Should be "atmel,<chip>-tcb".
<chip> can be "at91rm9200" or "at91sam9x5"
- reg: Should contain registers location and length
- interrupts: Should contain all interrupts for the TC block
diff --git a/MAINTAINERS b/MAINTAINERS
index 322db3a..1fa9074 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -637,6 +637,13 @@
S: Maintained
F: arch/arm/
+ARM SUB-ARCHITECTURES
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: MAINTAINED
+F: arch/arm/mach-*/
+F: arch/arm/plat-*/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
+
ARM PRIMECELL AACI PL041 DRIVER
M: Russell King <linux@arm.linux.org.uk>
S: Maintained
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index b06c0db..e6391a4 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -126,14 +126,14 @@
#size-cells = <0>;
btn3 {
- label = "Buttin 3";
+ label = "Button 3";
gpios = <&pioA 30 1>;
linux,code = <0x103>;
gpio-key,wakeup;
};
btn4 {
- label = "Buttin 4";
+ label = "Button 4";
gpios = <&pioA 31 1>;
linux,code = <0x104>;
gpio-key,wakeup;
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 748ba7a..4b0e0ca 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -483,6 +483,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80004000 0x1000>;
interrupts = <0 21 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -494,6 +496,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80122000 0x1000>;
interrupts = <0 22 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -505,6 +509,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80128000 0x1000>;
interrupts = <0 55 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -516,6 +522,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x80110000 0x1000>;
interrupts = <0 12 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -527,6 +535,8 @@
compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell";
reg = <0x8012a000 0x1000>;
interrupts = <0 51 0x4>;
+ arm,primecell-periphid = <0x180024>;
+
#address-cells = <1>;
#size-cells = <0>;
v-i2c-supply = <&db8500_vape_reg>;
@@ -573,33 +583,38 @@
interrupts = <0 60 0x4>;
status = "disabled";
};
+
sdi@80118000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80118000 0x1000>;
interrupts = <0 50 0x4>;
status = "disabled";
};
+
sdi@80005000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80005000 0x1000>;
interrupts = <0 41 0x4>;
status = "disabled";
};
+
sdi@80119000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80119000 0x1000>;
interrupts = <0 59 0x4>;
status = "disabled";
};
+
sdi@80114000 {
compatible = "arm,pl18x", "arm,primecell";
reg = <0x80114000 0x1000>;
interrupts = <0 99 0x4>;
status = "disabled";
};
+
sdi@80008000 {
compatible = "arm,pl18x", "arm,primecell";
- reg = <0x80114000 0x1000>;
+ reg = <0x80008000 0x1000>;
interrupts = <0 100 0x4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 73567b8..a21511c 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -20,8 +20,10 @@
compatible = "samsung,trats", "samsung,exynos4210";
memory {
- reg = <0x40000000 0x20000000
- 0x60000000 0x20000000>;
+ reg = <0x40000000 0x10000000
+ 0x50000000 0x10000000
+ 0x60000000 0x10000000
+ 0x70000000 0x10000000>;
};
chosen {
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 9ca4ca7..6d31aa3 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -69,6 +69,7 @@
interrupts = <13>, <56>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 34>;
+ clock-names = "gpmi_io";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index e16d631..55c57ea 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -85,6 +85,7 @@
interrupts = <88>, <41>;
interrupt-names = "gpmi-dma", "bch";
clocks = <&clks 50>;
+ clock-names = "gpmi_io";
fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f38ea87..696e929 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -257,7 +257,7 @@
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <1280>;
- ti,hwmods = "mcbsp2";
+ ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
};
mcbsp3: mcbsp@49024000 {
@@ -272,7 +272,7 @@
interrupt-names = "common", "tx", "rx", "sidetone";
interrupt-parent = <&intc>;
ti,buffer-size = <128>;
- ti,hwmods = "mcbsp3";
+ ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
};
mcbsp4: mcbsp@49026000 {
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 66aa7a6..394ded6 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -139,6 +139,7 @@
CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_MC9S08DZ60=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
@@ -155,6 +156,7 @@
CONFIG_SOC_CAMERA_OV2640=y
CONFIG_VIDEO_MX3=y
CONFIG_FB=y
+CONFIG_LCD_PLATFORM=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_L4F00242T03=y
diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig
index 7bcf850..3458752 100644
--- a/arch/arm/configs/mvebu_defconfig
+++ b/arch/arm/configs/mvebu_defconfig
@@ -1,6 +1,6 @@
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_BLK_DEV_INITRD=y
@@ -9,10 +9,12 @@
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_MVEBU=y
-CONFIG_MACH_ARMADA_370_XP=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_CACHE_L2X0 is not set
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
-CONFIG_USE_OF=y
+# CONFIG_COMPACTION is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_ARM_APPENDED_DTB=y
@@ -23,6 +25,8 @@
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index cdd4d2b..2ba9e63 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -1,3 +1,4 @@
+CONFIG_ARCH_VERSATILE=y
CONFIG_EXPERIMENTAL=y
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SYSVIPC=y
diff --git a/arch/arm/include/debug/8250_32.S b/arch/arm/include/debug/8250_32.S
new file mode 100644
index 0000000..8db01ee
--- /dev/null
+++ b/arch/arm/include/debug/8250_32.S
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2011 Picochip Ltd., Jamie Iles
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
+ * accesses to the 8250.
+ */
+
+#include <linux/serial_reg.h>
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ /* The UART's don't have any flow control IO's wired up. */
+ .macro waituart,rd,rx
+ .endm
diff --git a/arch/arm/include/debug/picoxcell.S b/arch/arm/include/debug/picoxcell.S
index 7419deb..bc1f07c 100644
--- a/arch/arm/include/debug/picoxcell.S
+++ b/arch/arm/include/debug/picoxcell.S
@@ -5,10 +5,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
- * Derived from arch/arm/mach-davinci/include/mach/debug-macro.S to use 32-bit
- * accesses to the 8250.
*/
-#include <linux/serial_reg.h>
#define UART_SHIFT 2
#define PICOXCELL_UART1_BASE 0x80230000
@@ -19,17 +16,4 @@
ldr \rp, =PICOXCELL_UART1_BASE
.endm
- .macro senduart,rd,rx
- str \rd, [\rx, #UART_TX << UART_SHIFT]
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
- and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
- teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
- bne 1002b
- .endm
-
- /* The UART's don't have any flow control IO's wired up. */
- .macro waituart,rd,rx
- .endm
+#include "8250_32.S"
diff --git a/arch/arm/include/debug/socfpga.S b/arch/arm/include/debug/socfpga.S
index d6f26d2..966b2f9 100644
--- a/arch/arm/include/debug/socfpga.S
+++ b/arch/arm/include/debug/socfpga.S
@@ -7,6 +7,9 @@
* published by the Free Software Foundation.
*/
+#define UART_SHIFT 2
+#define DEBUG_LL_UART_OFFSET 0x00002000
+
.macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rp, \rp, #0x00c00000
@@ -14,3 +17,5 @@
orr \rp, \rp, #0xff000000 @ physical base
.endm
+#include "8250_32.S"
+
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index b142071..0436242 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -21,19 +21,13 @@
bool
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
+ select MULTI_IRQ_HANDLER
+ select SPARSE_IRQ
menu "Atmel AT91 System-on-Chip"
comment "Atmel AT91 Processor"
-config SOC_AT91SAM9
- bool
- select AT91_SAM9_SMC
- select AT91_SAM9_TIME
- select CPU_ARM926T
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
config SOC_AT91RM9200
bool "AT91RM9200"
select CPU_ARM920T
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
index b4f0565..5269825 100644
--- a/arch/arm/mach-at91/at91rm9200.c
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -187,7 +187,7 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index a563189..1e122bc 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -479,7 +479,7 @@
static struct platform_device at91rm9200_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -512,7 +512,7 @@
static struct platform_device at91rm9200_twi_device = {
.name = "i2c-at91rm9200",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index ad29f93..f820261 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -211,8 +211,8 @@
CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
/* more usart lookup table for DT entries */
CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index a76b868..aa1e587 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -389,7 +389,7 @@
static struct platform_device at91sam9260_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -421,7 +421,7 @@
};
static struct platform_device at91sam9260_twi_device = {
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 8d999eb..04295c0 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -178,8 +178,8 @@
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
CLKDEV_CON_ID("pioB", &pioB_clk),
CLKDEV_CON_ID("pioC", &pioC_clk),
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 9752f17..b948769 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -285,7 +285,7 @@
static struct platform_device at91sam9261_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -317,7 +317,7 @@
};
static struct platform_device at91sam9261_twi_device = {
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 6a01d03..d6f9c23 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -193,7 +193,7 @@
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk),
+ CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
/* fake hclk clock */
CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
CLKDEV_CON_ID("pioA", &pioA_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 8dde220..cb85da2 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -567,7 +567,7 @@
static struct platform_device at91sam9263_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -600,7 +600,7 @@
static struct platform_device at91sam9263_twi_device = {
.name = "i2c-at91sam9260",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d6ca054..5047bdc 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -314,7 +314,7 @@
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-gpio",
- .id = -1,
+ .id = 0,
.dev.platform_data = &pdata,
};
@@ -347,7 +347,7 @@
static struct platform_device at91sam9rl_twi_device = {
.name = "i2c-at91sam9g20",
- .id = -1,
+ .id = 0,
.resource = twi_resources,
.num_resources = ARRAY_SIZE(twi_resources),
};
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 6bd7300..bb7f544 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -88,6 +88,6 @@
if (!priority)
priority = at91x40_default_irq_priority;
- at91_aic_init(priority);
+ at91_aic_init(priority, at91_extern_irq);
}
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9cda3fd..6960778 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -129,7 +129,7 @@
.max_speed_hz = 125000 * 16,
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
+ .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
},
#endif
};
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 27b3af1..a9167dd 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -309,7 +309,7 @@
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9261_ID_IRQ0,
+ .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
.controller_data = (void *) AT91_PIN_PA28, /* CS pin */
},
#endif
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index 073e174..b87dbe2 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -132,7 +132,7 @@
.max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
.bus_num = 0,
.platform_data = &ads_info,
- .irq = AT91SAM9263_ID_IRQ1,
+ .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
},
#endif
};
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index f496506..b62f560e 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -26,7 +26,8 @@
extern void __init at91_init_irq_default(void);
extern void __init at91_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[]);
+extern void __init at91_aic_init(unsigned int priority[],
+ unsigned int ext_irq_mask);
extern int __init at91_aic_of_init(struct device_node *node,
struct device_node *parent);
extern int __init at91_aic5_of_init(struct device_node *node,
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index 1e02c0e..febc2ee 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -502,14 +502,19 @@
/*
* Initialize the AIC interrupt controller.
*/
-void __init at91_aic_init(unsigned int *priority)
+void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
{
unsigned int i;
int irq_base;
- if (at91_aic_pm_init())
+ at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
+ * sizeof(*at91_extern_irq), GFP_KERNEL);
+
+ if (at91_aic_pm_init() || at91_extern_irq == NULL)
panic("Unable to allocate bit maps\n");
+ *at91_extern_irq = ext_irq_mask;
+
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Unable to ioremap AIC registers\n");
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index da9881b..0b32c81 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -47,7 +47,7 @@
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
+ at91_aic_init(priority, at91_extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
@@ -151,7 +151,7 @@
}
/* at91sam9g10 */
- if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
+ if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_boot_soc = at91sam9261_soc;
}
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 715b690..1947be8 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -47,6 +47,7 @@
#include <plat/fimc-core.h>
#include <plat/iic-core.h>
#include <plat/tv-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
@@ -346,6 +347,8 @@
s5p_fb_setname(0, "exynos4-fb");
s5p_hdmi_setname("exynos4-hdmi");
+
+ s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos5_map_io(void)
@@ -366,6 +369,8 @@
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
s3c_i2c2_setname("s3c2440-i2c");
+
+ s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos4_init_clocks(int xtal)
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index e58d786..eadf4b5 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -99,6 +99,7 @@
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+ .smp = smp_ops(exynos_smp_ops),
.init_irq = exynos4_init_irq,
.map_io = exynos4_dt_map_io,
.handle_irq = gic_handle_irq,
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
index 1a7a8dd..1ab91b5 100644
--- a/arch/arm/mach-imx/clk-busy.c
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -108,7 +108,7 @@
busy->div.hw.init = &init;
clk = clk_register(NULL, &busy->div.hw);
- if (!clk)
+ if (IS_ERR(clk))
kfree(busy);
return clk;
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
index d20d479..01e2f84 100644
--- a/arch/arm/mach-imx/clk-imx25.c
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -127,8 +127,8 @@
clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
- clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7);
- clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8);
+ clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per7", ccm(CCM_CGCR0), 7);
+ clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "per8", ccm(CCM_CGCR0), 8);
clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 3b6b640..366e5d5 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -109,7 +109,7 @@
clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
- clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+ clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 6);
clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
@@ -121,7 +121,7 @@
clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
- clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+ clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 6);
clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9d2c843..b5deb05 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -108,9 +108,8 @@
}
l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
- if (IS_ERR(l2x0_base)) {
- printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
- PTR_ERR(l2x0_base));
+ if (!l2x0_base) {
+ printk(KERN_ERR "remapping L2 cache area failed\n");
return;
}
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 2a1a898..d669e22 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -11,7 +11,6 @@
select I2C_OMAP
select MENELAUS if ARCH_OMAP2
select NEON if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
- select PINCTRL
select PM_RUNTIME
select REGULATOR
select SERIAL_OMAP
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 388c431..d41ab98 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -24,6 +24,7 @@
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/opp.h>
+#include <linux/cpu.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
@@ -444,27 +445,31 @@
};
#endif
-static void __init beagle_opp_init(void)
+static int __init beagle_opp_init(void)
{
int r = 0;
- /* Initialize the omap3 opp table */
- if (omap3_opp_init()) {
+ if (!machine_is_omap3_beagle())
+ return 0;
+
+ /* Initialize the omap3 opp table if not already created. */
+ r = omap3_opp_init();
+ if (IS_ERR_VALUE(r) && (r != -EEXIST)) {
pr_err("%s: opp default init failed\n", __func__);
- return;
+ return r;
}
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct device *mpu_dev, *iva_dev;
- mpu_dev = omap_device_get_by_hwmod_name("mpu");
+ mpu_dev = get_cpu_device(0);
iva_dev = omap_device_get_by_hwmod_name("iva");
if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mpu_dev, iva_dev);
- return;
+ return -ENODEV;
}
/* Enable MPU 1GHz and lower opps */
r = opp_enable(mpu_dev, 800000000);
@@ -484,8 +489,9 @@
opp_disable(iva_dev, 660000000);
}
}
- return;
+ return 0;
}
+device_initcall(beagle_opp_init);
static void __init omap3_beagle_init(void)
{
@@ -522,8 +528,6 @@
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
- beagle_opp_init();
}
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c
index 114ab4b..1a45d6b 100644
--- a/arch/arm/mach-omap2/clock33xx_data.c
+++ b/arch/arm/mach-omap2/clock33xx_data.c
@@ -1073,6 +1073,8 @@
CLK(NULL, "gfx_fck_div_ck", &gfx_fck_div_ck, CK_AM33XX),
CLK(NULL, "sysclkout_pre_ck", &sysclkout_pre_ck, CK_AM33XX),
CLK(NULL, "clkout2_ck", &clkout2_ck, CK_AM33XX),
+ CLK(NULL, "timer_32k_ck", &clkdiv32k_ick, CK_AM33XX),
+ CLK(NULL, "timer_sys_ck", &sys_clkin_ck, CK_AM33XX),
};
int __init am33xx_clk_init(void)
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 17f80e4..c47140b 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -614,16 +614,16 @@
"sys_off_mode", NULL, NULL, NULL,
"gpio_9", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_CTS, 150,
- "uart1_cts", NULL, NULL, NULL,
+ "uart1_cts", "ssi1_rdy_tx", NULL, NULL,
"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RTS, 149,
- "uart1_rts", NULL, NULL, NULL,
+ "uart1_rts", "ssi1_flag_tx", NULL, NULL,
"gpio_149", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_RX, 151,
- "uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+ "uart1_rx", "ss1_wake_tx", "mcbsp1_clkr", "mcspi4_clk",
"gpio_151", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART1_TX, 148,
- "uart1_tx", NULL, NULL, NULL,
+ "uart1_tx", "ssi1_dat_tx", NULL, NULL,
"gpio_148", NULL, NULL, "safe_mode"),
_OMAP3_MUXENTRY(UART2_CTS, 144,
"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 686137d..67d6613 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -91,6 +91,7 @@
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
+#define PM_PER_MEMORIES_ERRATUM_i582 (1 << 2)
#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
extern u16 pm34xx_errata;
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index ba670db..3a904de 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -652,14 +652,17 @@
/* Enable the l2 cache toggling in sleep logic */
enable_omap3630_toggle_l2_on_restore();
if (omap_rev() < OMAP3630_REV_ES1_2)
- pm34xx_errata |= PM_SDRC_WAKEUP_ERRATUM_i583;
+ pm34xx_errata |= (PM_SDRC_WAKEUP_ERRATUM_i583 |
+ PM_PER_MEMORIES_ERRATUM_i582);
+ } else if (cpu_is_omap34xx()) {
+ pm34xx_errata |= PM_PER_MEMORIES_ERRATUM_i582;
}
}
int __init omap3_pm_init(void)
{
struct power_state *pwrst, *tmp;
- struct clockdomain *neon_clkdm, *mpu_clkdm;
+ struct clockdomain *neon_clkdm, *mpu_clkdm, *per_clkdm, *wkup_clkdm;
int ret;
if (!omap3_has_io_chain_ctrl())
@@ -711,6 +714,8 @@
neon_clkdm = clkdm_lookup("neon_clkdm");
mpu_clkdm = clkdm_lookup("mpu_clkdm");
+ per_clkdm = clkdm_lookup("per_clkdm");
+ wkup_clkdm = clkdm_lookup("wkup_clkdm");
#ifdef CONFIG_SUSPEND
omap_pm_suspend = omap3_pm_suspend;
@@ -727,6 +732,27 @@
if (IS_PM34XX_ERRATUM(PM_RTA_ERRATUM_i608))
omap3630_ctrl_disable_rta();
+ /*
+ * The UART3/4 FIFO and the sidetone memory in McBSP2/3 are
+ * not correctly reset when the PER powerdomain comes back
+ * from OFF or OSWR when the CORE powerdomain is kept active.
+ * See OMAP36xx Erratum i582 "PER Domain reset issue after
+ * Domain-OFF/OSWR Wakeup". This wakeup dependency is not a
+ * complete workaround. The kernel must also prevent the PER
+ * powerdomain from going to OSWR/OFF while the CORE
+ * powerdomain is not going to OSWR/OFF. And if PER last
+ * power state was off while CORE last power state was ON, the
+ * UART3/4 and McBSP2/3 SIDETONE devices need to run a
+ * self-test using their loopback tests; if that fails, those
+ * devices are unusable until the PER/CORE can complete a transition
+ * from ON to OSWR/OFF and then back to ON.
+ *
+ * XXX Technically this workaround is only needed if off-mode
+ * or OSWR is enabled.
+ */
+ if (IS_PM34XX_ERRATUM(PM_PER_MEMORIES_ERRATUM_i582))
+ clkdm_add_wkdep(per_clkdm, wkup_clkdm);
+
clkdm_add_wkdep(neon_clkdm, mpu_clkdm);
if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
omap3_secure_ram_storage =
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0405c81..a507cd6 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -329,6 +329,11 @@
oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt);
+ if (console_uart_id == bdata->id) {
+ omap_device_enable(pdev);
+ pm_runtime_set_active(&pdev->dev);
+ }
+
oh->dev_attr = uart;
if (((cpu_is_omap34xx() || cpu_is_omap44xx()) && bdata->pads)
diff --git a/arch/arm/mach-s3c24xx/s3c2416.c b/arch/arm/mach-s3c24xx/s3c2416.c
index ed5a95ec..77ee0b7 100644
--- a/arch/arm/mach-s3c24xx/s3c2416.c
+++ b/arch/arm/mach-s3c24xx/s3c2416.c
@@ -61,6 +61,7 @@
#include <plat/nand-core.h>
#include <plat/adc-core.h>
#include <plat/rtc-core.h>
+#include <plat/spi-core.h>
static struct map_desc s3c2416_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -132,6 +133,7 @@
/* initialize device information early */
s3c2416_default_sdhci0();
s3c2416_default_sdhci1();
+ s3c64xx_spi_setname("s3c2443-spi");
iotable_init(s3c2416_iodesc, ARRAY_SIZE(s3c2416_iodesc));
}
diff --git a/arch/arm/mach-s3c24xx/s3c2443.c b/arch/arm/mach-s3c24xx/s3c2443.c
index ab648ad..165b6a6 100644
--- a/arch/arm/mach-s3c24xx/s3c2443.c
+++ b/arch/arm/mach-s3c24xx/s3c2443.c
@@ -43,6 +43,7 @@
#include <plat/nand-core.h>
#include <plat/adc-core.h>
#include <plat/rtc-core.h>
+#include <plat/spi-core.h>
static struct map_desc s3c2443_iodesc[] __initdata = {
IODESC_ENT(WATCHDOG),
@@ -100,6 +101,9 @@
s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull;
s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull;
+ /* initialize device information early */
+ s3c64xx_spi_setname("s3c2443-spi");
+
iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc));
}
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 6e6a0a9..111e404 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -44,6 +44,7 @@
#include <plat/sdhci.h>
#include <plat/adc-core.h>
#include <plat/fb-core.h>
+#include <plat/spi-core.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-irqtype.h>
#include <plat/regs-serial.h>
@@ -179,6 +180,7 @@
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
@@ -193,6 +195,7 @@
/* initialize any device information early */
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s3c64xx_spi_setname("s5p64x0-spi");
s5p64x0_default_sdhci0();
s5p64x0_default_sdhci1();
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index 6219086..cc6e561 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -45,6 +45,7 @@
#include <plat/fb-core.h>
#include <plat/iic-core.h>
#include <plat/onenand-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include <plat/watchdog-reset.h>
@@ -165,6 +166,8 @@
s3c_onenand_setname("s5pc100-onenand");
s3c_fb_setname("s5pc100-fb");
s3c_cfcon_setname("s5pc100-pata");
+
+ s3c64xx_spi_setname("s5pc100-spi");
}
void __init s5pc100_init_clocks(int xtal)
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 4c9e902..a0c50ef 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -43,6 +43,7 @@
#include <plat/iic-core.h>
#include <plat/keypad-core.h>
#include <plat/tv-core.h>
+#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
@@ -196,6 +197,8 @@
/* setup TV devices */
s5p_hdmi_setname("s5pv210-hdmi");
+
+ s3c64xx_spi_setname("s5pv210-spi");
}
void __init s5pv210_init_clocks(int xtal)
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 2917668..ebbffc2 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -247,7 +247,7 @@
{
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*16way */
- l2x0_init((void __iomem __force *)(0xf0100000), 0x40470000, 0x82000fff);
+ l2x0_init(IOMEM(0xf0100000), 0x40470000, 0x82000fff);
#endif
r8a7779_pm_init();
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-spear13xx/include/mach/spear1310_misc_regs.h
+++ /dev/null
diff --git a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h b/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
deleted file mode 100644
index e69de29..0000000
--- a/arch/arm/mach-spear13xx/include/mach/spear1340_misc_regs.h
+++ /dev/null
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 2236cbd..1f3fbc2 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -16,6 +16,7 @@
#include <linux/stat.h>
#include <linux/of.h>
#include <linux/of_irq.h>
+#include <linux/irq.h>
#include <linux/platform_data/clk-ux500.h>
#include <asm/hardware/gic.h>
diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
index 540d3a7..e7b920b 100644
--- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
+++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c
@@ -55,7 +55,7 @@
struct resource res[] = {
{
.start = data->iobase,
- .end = data->iobase + SZ_4K - 1,
+ .end = data->iobase + data->iosize - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 7cd56ed..82fcb20 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -26,6 +26,7 @@
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select PINCTRL
select PROC_DEVICETREE if PROC_FS
select SPARSE_IRQ
select USE_OF
diff --git a/arch/arm/plat-samsung/include/plat/spi-core.h b/arch/arm/plat-samsung/include/plat/spi-core.h
new file mode 100644
index 0000000..0b9428a
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/spi-core.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2012 Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_S3C_SPI_CORE_H
+#define __PLAT_S3C_SPI_CORE_H
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c64xx_spi_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+ s3c64xx_device_spi0.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+ s3c64xx_device_spi1.name = name;
+#endif
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+ s3c64xx_device_spi2.name = name;
+#endif
+}
+
+#endif /* __PLAT_S3C_SPI_CORE_H */
