| /* |
| * Sony CXD2820R demodulator driver |
| * |
| * Copyright (C) 2010 Antti Palosaari <crope@iki.fi> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. |
| */ |
| |
| |
| #include "cxd2820r_priv.h" |
| |
| int cxd2820r_debug; |
| module_param_named(debug, cxd2820r_debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off)."); |
| |
| /* write multiple registers */ |
| static int cxd2820r_wr_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, |
| u8 *val, int len) |
| { |
| int ret; |
| u8 buf[len+1]; |
| struct i2c_msg msg[1] = { |
| { |
| .addr = i2c, |
| .flags = 0, |
| .len = sizeof(buf), |
| .buf = buf, |
| } |
| }; |
| |
| buf[0] = reg; |
| memcpy(&buf[1], val, len); |
| |
| ret = i2c_transfer(priv->i2c, msg, 1); |
| if (ret == 1) { |
| ret = 0; |
| } else { |
| warn("i2c wr failed ret:%d reg:%02x len:%d", ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| return ret; |
| } |
| |
| /* read multiple registers */ |
| static int cxd2820r_rd_regs_i2c(struct cxd2820r_priv *priv, u8 i2c, u8 reg, |
| u8 *val, int len) |
| { |
| int ret; |
| u8 buf[len]; |
| struct i2c_msg msg[2] = { |
| { |
| .addr = i2c, |
| .flags = 0, |
| .len = 1, |
| .buf = ®, |
| }, { |
| .addr = i2c, |
| .flags = I2C_M_RD, |
| .len = sizeof(buf), |
| .buf = buf, |
| } |
| }; |
| |
| ret = i2c_transfer(priv->i2c, msg, 2); |
| if (ret == 2) { |
| memcpy(val, buf, len); |
| ret = 0; |
| } else { |
| warn("i2c rd failed ret:%d reg:%02x len:%d", ret, reg, len); |
| ret = -EREMOTEIO; |
| } |
| |
| return ret; |
| } |
| |
| /* write multiple registers */ |
| int cxd2820r_wr_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, |
| int len) |
| { |
| int ret; |
| u8 i2c_addr; |
| u8 reg = (reginfo >> 0) & 0xff; |
| u8 bank = (reginfo >> 8) & 0xff; |
| u8 i2c = (reginfo >> 16) & 0x01; |
| |
| /* select I2C */ |
| if (i2c) |
| i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */ |
| else |
| i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */ |
| |
| /* switch bank if needed */ |
| if (bank != priv->bank[i2c]) { |
| ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1); |
| if (ret) |
| return ret; |
| priv->bank[i2c] = bank; |
| } |
| return cxd2820r_wr_regs_i2c(priv, i2c_addr, reg, val, len); |
| } |
| |
| /* read multiple registers */ |
| int cxd2820r_rd_regs(struct cxd2820r_priv *priv, u32 reginfo, u8 *val, |
| int len) |
| { |
| int ret; |
| u8 i2c_addr; |
| u8 reg = (reginfo >> 0) & 0xff; |
| u8 bank = (reginfo >> 8) & 0xff; |
| u8 i2c = (reginfo >> 16) & 0x01; |
| |
| /* select I2C */ |
| if (i2c) |
| i2c_addr = priv->cfg.i2c_address | (1 << 1); /* DVB-C */ |
| else |
| i2c_addr = priv->cfg.i2c_address; /* DVB-T/T2 */ |
| |
| /* switch bank if needed */ |
| if (bank != priv->bank[i2c]) { |
| ret = cxd2820r_wr_regs_i2c(priv, i2c_addr, 0x00, &bank, 1); |
| if (ret) |
| return ret; |
| priv->bank[i2c] = bank; |
| } |
| return cxd2820r_rd_regs_i2c(priv, i2c_addr, reg, val, len); |
| } |
| |
| /* write single register */ |
| int cxd2820r_wr_reg(struct cxd2820r_priv *priv, u32 reg, u8 val) |
| { |
| return cxd2820r_wr_regs(priv, reg, &val, 1); |
| } |
| |
| /* read single register */ |
| int cxd2820r_rd_reg(struct cxd2820r_priv *priv, u32 reg, u8 *val) |
| { |
| return cxd2820r_rd_regs(priv, reg, val, 1); |
| } |
| |
| /* write single register with mask */ |
| int cxd2820r_wr_reg_mask(struct cxd2820r_priv *priv, u32 reg, u8 val, |
| u8 mask) |
| { |
| int ret; |
| u8 tmp; |
| |
| /* no need for read if whole reg is written */ |
| if (mask != 0xff) { |
| ret = cxd2820r_rd_reg(priv, reg, &tmp); |
| if (ret) |
| return ret; |
| |
| val &= mask; |
| tmp &= ~mask; |
| val |= tmp; |
| } |
| |
| return cxd2820r_wr_reg(priv, reg, val); |
| } |
| |
| int cxd2820r_gpio(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| int ret, i; |
| u8 *gpio, tmp0, tmp1; |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| gpio = priv->cfg.gpio_dvbt; |
| break; |
| case SYS_DVBT2: |
| gpio = priv->cfg.gpio_dvbt2; |
| break; |
| case SYS_DVBC_ANNEX_AC: |
| gpio = priv->cfg.gpio_dvbc; |
| break; |
| default: |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| /* update GPIOs only when needed */ |
| if (!memcmp(gpio, priv->gpio, sizeof(priv->gpio))) |
| return 0; |
| |
| tmp0 = 0x00; |
| tmp1 = 0x00; |
| for (i = 0; i < sizeof(priv->gpio); i++) { |
| /* enable / disable */ |
| if (gpio[i] & CXD2820R_GPIO_E) |
| tmp0 |= (2 << 6) >> (2 * i); |
| else |
| tmp0 |= (1 << 6) >> (2 * i); |
| |
| /* input / output */ |
| if (gpio[i] & CXD2820R_GPIO_I) |
| tmp1 |= (1 << (3 + i)); |
| else |
| tmp1 |= (0 << (3 + i)); |
| |
| /* high / low */ |
| if (gpio[i] & CXD2820R_GPIO_H) |
| tmp1 |= (1 << (0 + i)); |
| else |
| tmp1 |= (0 << (0 + i)); |
| |
| dbg("%s: GPIO i=%d %02x %02x", __func__, i, tmp0, tmp1); |
| } |
| |
| dbg("%s: wr gpio=%02x %02x", __func__, tmp0, tmp1); |
| |
| /* write bits [7:2] */ |
| ret = cxd2820r_wr_reg_mask(priv, 0x00089, tmp0, 0xfc); |
| if (ret) |
| goto error; |
| |
| /* write bits [5:0] */ |
| ret = cxd2820r_wr_reg_mask(priv, 0x0008e, tmp1, 0x3f); |
| if (ret) |
| goto error; |
| |
| memcpy(priv->gpio, gpio, sizeof(priv->gpio)); |
| |
| return ret; |
| error: |
| dbg("%s: failed:%d", __func__, ret); |
| return ret; |
| } |
| |
| /* 64 bit div with round closest, like DIV_ROUND_CLOSEST but 64 bit */ |
| u32 cxd2820r_div_u64_round_closest(u64 dividend, u32 divisor) |
| { |
| return div_u64(dividend + (divisor / 2), divisor); |
| } |
| |
| static int cxd2820r_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (c->delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_init_t(fe); |
| if (ret < 0) |
| goto err; |
| ret = cxd2820r_set_frontend_t(fe); |
| if (ret < 0) |
| goto err; |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_init_t(fe); |
| if (ret < 0) |
| goto err; |
| ret = cxd2820r_set_frontend_t2(fe); |
| if (ret < 0) |
| goto err; |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_init_c(fe); |
| if (ret < 0) |
| goto err; |
| ret = cxd2820r_set_frontend_c(fe); |
| if (ret < 0) |
| goto err; |
| break; |
| default: |
| dbg("%s: error state=%d", __func__, fe->dtv_property_cache.delivery_system); |
| ret = -EINVAL; |
| break; |
| } |
| err: |
| return ret; |
| } |
| static int cxd2820r_read_status(struct dvb_frontend *fe, fe_status_t *status) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_read_status_t(fe, status); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_read_status_t2(fe, status); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_read_status_c(fe, status); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_get_frontend(struct dvb_frontend *fe) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_get_frontend_t(fe); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_get_frontend_t2(fe); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_get_frontend_c(fe); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_read_ber_t(fe, ber); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_read_ber_t2(fe, ber); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_read_ber_c(fe, ber); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_read_signal_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_read_signal_strength_t(fe, strength); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_read_signal_strength_t2(fe, strength); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_read_signal_strength_c(fe, strength); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_read_snr_t(fe, snr); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_read_snr_t2(fe, snr); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_read_snr_c(fe, snr); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_read_ucblocks_t(fe, ucblocks); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_read_ucblocks_t2(fe, ucblocks); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_read_ucblocks_c(fe, ucblocks); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_init(struct dvb_frontend *fe) |
| { |
| return 0; |
| } |
| |
| static int cxd2820r_sleep(struct dvb_frontend *fe) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_sleep_t(fe); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_sleep_t2(fe); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_sleep_c(fe); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static int cxd2820r_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *s) |
| { |
| int ret; |
| |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| switch (fe->dtv_property_cache.delivery_system) { |
| case SYS_DVBT: |
| ret = cxd2820r_get_tune_settings_t(fe, s); |
| break; |
| case SYS_DVBT2: |
| ret = cxd2820r_get_tune_settings_t2(fe, s); |
| break; |
| case SYS_DVBC_ANNEX_A: |
| ret = cxd2820r_get_tune_settings_c(fe, s); |
| break; |
| default: |
| ret = -EINVAL; |
| break; |
| } |
| return ret; |
| } |
| |
| static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret, i; |
| fe_status_t status = 0; |
| dbg("%s: delsys=%d", __func__, fe->dtv_property_cache.delivery_system); |
| |
| /* switch between DVB-T and DVB-T2 when tune fails */ |
| if (priv->last_tune_failed && (priv->delivery_system != SYS_DVBC_ANNEX_A)) { |
| if (priv->delivery_system == SYS_DVBT) |
| c->delivery_system = SYS_DVBT2; |
| else |
| c->delivery_system = SYS_DVBT; |
| } |
| |
| /* set frontend */ |
| ret = cxd2820r_set_frontend(fe); |
| if (ret) |
| goto error; |
| |
| |
| /* frontend lock wait loop count */ |
| switch (priv->delivery_system) { |
| case SYS_DVBT: |
| i = 20; |
| break; |
| case SYS_DVBT2: |
| i = 40; |
| break; |
| case SYS_UNDEFINED: |
| default: |
| i = 0; |
| break; |
| } |
| |
| /* wait frontend lock */ |
| for (; i > 0; i--) { |
| dbg("%s: LOOP=%d", __func__, i); |
| msleep(50); |
| ret = cxd2820r_read_status(fe, &status); |
| if (ret) |
| goto error; |
| |
| if (status & FE_HAS_SIGNAL) |
| break; |
| } |
| |
| /* check if we have a valid signal */ |
| if (status) { |
| priv->last_tune_failed = 0; |
| return DVBFE_ALGO_SEARCH_SUCCESS; |
| } else { |
| priv->last_tune_failed = 1; |
| return DVBFE_ALGO_SEARCH_AGAIN; |
| } |
| |
| error: |
| dbg("%s: failed:%d", __func__, ret); |
| return DVBFE_ALGO_SEARCH_ERROR; |
| } |
| |
| static int cxd2820r_get_frontend_algo(struct dvb_frontend *fe) |
| { |
| return DVBFE_ALGO_CUSTOM; |
| } |
| |
| static void cxd2820r_release(struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| dbg("%s", __func__); |
| |
| kfree(priv); |
| return; |
| } |
| |
| static int cxd2820r_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct cxd2820r_priv *priv = fe->demodulator_priv; |
| dbg("%s: %d", __func__, enable); |
| |
| /* Bit 0 of reg 0xdb in bank 0x00 controls I2C repeater */ |
| return cxd2820r_wr_reg_mask(priv, 0xdb, enable ? 1 : 0, 0x1); |
| } |
| |
| static const struct dvb_frontend_ops cxd2820r_ops = { |
| .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, |
| /* default: DVB-T/T2 */ |
| .info = { |
| .name = "Sony CXD2820R (DVB-T/T2)", |
| |
| .caps = FE_CAN_FEC_1_2 | |
| FE_CAN_FEC_2_3 | |
| FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | |
| FE_CAN_FEC_7_8 | |
| FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | |
| FE_CAN_QAM_16 | |
| FE_CAN_QAM_64 | |
| FE_CAN_QAM_256 | |
| FE_CAN_QAM_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | |
| FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_HIERARCHY_AUTO | |
| FE_CAN_MUTE_TS | |
| FE_CAN_2G_MODULATION |
| }, |
| |
| .release = cxd2820r_release, |
| .init = cxd2820r_init, |
| .sleep = cxd2820r_sleep, |
| |
| .get_tune_settings = cxd2820r_get_tune_settings, |
| .i2c_gate_ctrl = cxd2820r_i2c_gate_ctrl, |
| |
| .get_frontend = cxd2820r_get_frontend, |
| |
| .get_frontend_algo = cxd2820r_get_frontend_algo, |
| .search = cxd2820r_search, |
| |
| .read_status = cxd2820r_read_status, |
| .read_snr = cxd2820r_read_snr, |
| .read_ber = cxd2820r_read_ber, |
| .read_ucblocks = cxd2820r_read_ucblocks, |
| .read_signal_strength = cxd2820r_read_signal_strength, |
| }; |
| |
| struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, |
| struct i2c_adapter *i2c, |
| struct dvb_frontend *fe) |
| { |
| struct cxd2820r_priv *priv = NULL; |
| int ret; |
| u8 tmp; |
| |
| priv = kzalloc(sizeof (struct cxd2820r_priv), GFP_KERNEL); |
| if (!priv) |
| goto error; |
| |
| priv->i2c = i2c; |
| memcpy(&priv->cfg, cfg, sizeof (struct cxd2820r_config)); |
| |
| priv->bank[0] = priv->bank[1] = 0xff; |
| ret = cxd2820r_rd_reg(priv, 0x000fd, &tmp); |
| dbg("%s: chip id=%02x", __func__, tmp); |
| if (ret || tmp != 0xe1) |
| goto error; |
| |
| memcpy(&priv->fe.ops, &cxd2820r_ops, sizeof (struct dvb_frontend_ops)); |
| priv->fe.demodulator_priv = priv; |
| return &priv->fe; |
| error: |
| kfree(priv); |
| return NULL; |
| } |
| EXPORT_SYMBOL(cxd2820r_attach); |
| |
| MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); |
| MODULE_DESCRIPTION("Sony CXD2820R demodulator driver"); |
| MODULE_LICENSE("GPL"); |