| /* |
| * scsi_lib.c Copyright (C) 1999 Eric Youngdale |
| * |
| * SCSI queueing library. |
| * Initial versions: Eric Youngdale (eric@andante.org). |
| * Based upon conversations with large numbers |
| * of people at Linux Expo. |
| */ |
| |
| #include <linux/bio.h> |
| #include <linux/blkdev.h> |
| #include <linux/completion.h> |
| #include <linux/kernel.h> |
| #include <linux/mempool.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| |
| #include <scsi/scsi.h> |
| #include <scsi/scsi_dbg.h> |
| #include <scsi/scsi_device.h> |
| #include <scsi/scsi_driver.h> |
| #include <scsi/scsi_eh.h> |
| #include <scsi/scsi_host.h> |
| #include <scsi/scsi_request.h> |
| |
| #include "scsi_priv.h" |
| #include "scsi_logging.h" |
| |
| |
| #define SG_MEMPOOL_NR (sizeof(scsi_sg_pools)/sizeof(struct scsi_host_sg_pool)) |
| #define SG_MEMPOOL_SIZE 32 |
| |
| struct scsi_host_sg_pool { |
| size_t size; |
| char *name; |
| kmem_cache_t *slab; |
| mempool_t *pool; |
| }; |
| |
| #if (SCSI_MAX_PHYS_SEGMENTS < 32) |
| #error SCSI_MAX_PHYS_SEGMENTS is too small |
| #endif |
| |
| #define SP(x) { x, "sgpool-" #x } |
| static struct scsi_host_sg_pool scsi_sg_pools[] = { |
| SP(8), |
| SP(16), |
| SP(32), |
| #if (SCSI_MAX_PHYS_SEGMENTS > 32) |
| SP(64), |
| #if (SCSI_MAX_PHYS_SEGMENTS > 64) |
| SP(128), |
| #if (SCSI_MAX_PHYS_SEGMENTS > 128) |
| SP(256), |
| #if (SCSI_MAX_PHYS_SEGMENTS > 256) |
| #error SCSI_MAX_PHYS_SEGMENTS is too large |
| #endif |
| #endif |
| #endif |
| #endif |
| }; |
| #undef SP |
| |
| static void scsi_run_queue(struct request_queue *q); |
| |
| /* |
| * Function: scsi_unprep_request() |
| * |
| * Purpose: Remove all preparation done for a request, including its |
| * associated scsi_cmnd, so that it can be requeued. |
| * |
| * Arguments: req - request to unprepare |
| * |
| * Lock status: Assumed that no locks are held upon entry. |
| * |
| * Returns: Nothing. |
| */ |
| static void scsi_unprep_request(struct request *req) |
| { |
| struct scsi_cmnd *cmd = req->special; |
| |
| req->flags &= ~REQ_DONTPREP; |
| req->special = (req->flags & REQ_SPECIAL) ? cmd->sc_request : NULL; |
| |
| scsi_put_command(cmd); |
| } |
| |
| /* |
| * Function: scsi_queue_insert() |
| * |
| * Purpose: Insert a command in the midlevel queue. |
| * |
| * Arguments: cmd - command that we are adding to queue. |
| * reason - why we are inserting command to queue. |
| * |
| * Lock status: Assumed that lock is not held upon entry. |
| * |
| * Returns: Nothing. |
| * |
| * Notes: We do this for one of two cases. Either the host is busy |
| * and it cannot accept any more commands for the time being, |
| * or the device returned QUEUE_FULL and can accept no more |
| * commands. |
| * Notes: This could be called either from an interrupt context or a |
| * normal process context. |
| */ |
| int scsi_queue_insert(struct scsi_cmnd *cmd, int reason) |
| { |
| struct Scsi_Host *host = cmd->device->host; |
| struct scsi_device *device = cmd->device; |
| struct request_queue *q = device->request_queue; |
| unsigned long flags; |
| |
| SCSI_LOG_MLQUEUE(1, |
| printk("Inserting command %p into mlqueue\n", cmd)); |
| |
| /* |
| * Set the appropriate busy bit for the device/host. |
| * |
| * If the host/device isn't busy, assume that something actually |
| * completed, and that we should be able to queue a command now. |
| * |
| * Note that the prior mid-layer assumption that any host could |
| * always queue at least one command is now broken. The mid-layer |
| * will implement a user specifiable stall (see |
| * scsi_host.max_host_blocked and scsi_device.max_device_blocked) |
| * if a command is requeued with no other commands outstanding |
| * either for the device or for the host. |
| */ |
| if (reason == SCSI_MLQUEUE_HOST_BUSY) |
| host->host_blocked = host->max_host_blocked; |
| else if (reason == SCSI_MLQUEUE_DEVICE_BUSY) |
| device->device_blocked = device->max_device_blocked; |
| |
| /* |
| * Decrement the counters, since these commands are no longer |
| * active on the host/device. |
| */ |
| scsi_device_unbusy(device); |
| |
| /* |
| * Requeue this command. It will go before all other commands |
| * that are already in the queue. |
| * |
| * NOTE: there is magic here about the way the queue is plugged if |
| * we have no outstanding commands. |
| * |
| * Although we *don't* plug the queue, we call the request |
| * function. The SCSI request function detects the blocked condition |
| * and plugs the queue appropriately. |
| */ |
| spin_lock_irqsave(q->queue_lock, flags); |
| blk_requeue_request(q, cmd->request); |
| spin_unlock_irqrestore(q->queue_lock, flags); |
| |
| scsi_run_queue(q); |
| |
| return 0; |
| } |
| |
| /* |
| * Function: scsi_do_req |
| * |
| * Purpose: Queue a SCSI request |
| * |
| * Arguments: sreq - command descriptor. |
| * cmnd - actual SCSI command to be performed. |
| * buffer - data buffer. |
| * bufflen - size of data buffer. |
| * done - completion function to be run. |
| * timeout - how long to let it run before timeout. |
| * retries - number of retries we allow. |
| * |
| * Lock status: No locks held upon entry. |
| * |
| * Returns: Nothing. |
| * |
| * Notes: This function is only used for queueing requests for things |
| * like ioctls and character device requests - this is because |
| * we essentially just inject a request into the queue for the |
| * device. |
| * |
| * In order to support the scsi_device_quiesce function, we |
| * now inject requests on the *head* of the device queue |
| * rather than the tail. |
| */ |
| void scsi_do_req(struct scsi_request *sreq, const void *cmnd, |
| void *buffer, unsigned bufflen, |
| void (*done)(struct scsi_cmnd *), |
| int timeout, int retries) |
| { |
| /* |
| * If the upper level driver is reusing these things, then |
| * we should release the low-level block now. Another one will |
| * be allocated later when this request is getting queued. |
| */ |
| __scsi_release_request(sreq); |
| |
| /* |
| * Our own function scsi_done (which marks the host as not busy, |
| * disables the timeout counter, etc) will be called by us or by the |
| * scsi_hosts[host].queuecommand() function needs to also call |
| * the completion function for the high level driver. |
| */ |
| memcpy(sreq->sr_cmnd, cmnd, sizeof(sreq->sr_cmnd)); |
| sreq->sr_bufflen = bufflen; |
| sreq->sr_buffer = buffer; |
| sreq->sr_allowed = retries; |
| sreq->sr_done = done; |
| sreq->sr_timeout_per_command = timeout; |
| |
| if (sreq->sr_cmd_len == 0) |
| sreq->sr_cmd_len = COMMAND_SIZE(sreq->sr_cmnd[0]); |
| |
| /* |
| * head injection *required* here otherwise quiesce won't work |
| * |
| * Because users of this function are apt to reuse requests with no |
| * modification, we have to sanitise the request flags here |
| */ |
| sreq->sr_request->flags &= ~REQ_DONTPREP; |
| blk_insert_request(sreq->sr_device->request_queue, sreq->sr_request, |
| 1, sreq); |
| } |
| EXPORT_SYMBOL(scsi_do_req); |
| |
| /** |
| * scsi_execute - insert request and wait for the result |
| * @sdev: scsi device |
| * @cmd: scsi command |
| * @data_direction: data direction |
| * @buffer: data buffer |
| * @bufflen: len of buffer |
| * @sense: optional sense buffer |
| * @timeout: request timeout in seconds |
| * @retries: number of times to retry request |
| * @flags: or into request flags; |
| * |
| * returns the req->errors value which is the the scsi_cmnd result |
| * field. |
| **/ |
| int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, |
| int data_direction, void *buffer, unsigned bufflen, |
| unsigned char *sense, int timeout, int retries, int flags) |
| { |
| struct request *req; |
| int write = (data_direction == DMA_TO_DEVICE); |
| int ret = DRIVER_ERROR << 24; |
| |
| req = blk_get_request(sdev->request_queue, write, __GFP_WAIT); |
| |
| if (bufflen && blk_rq_map_kern(sdev->request_queue, req, |
| buffer, bufflen, __GFP_WAIT)) |
| goto out; |
| |
| req->cmd_len = COMMAND_SIZE(cmd[0]); |
| memcpy(req->cmd, cmd, req->cmd_len); |
| req->sense = sense; |
| req->sense_len = 0; |
| req->retries = retries; |
| req->timeout = timeout; |
| req->flags |= flags | REQ_BLOCK_PC | REQ_SPECIAL | REQ_QUIET; |
| |
| /* |
| * head injection *required* here otherwise quiesce won't work |
| */ |
| blk_execute_rq(req->q, NULL, req, 1); |
| |
| ret = req->errors; |
| out: |
| blk_put_request(req); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(scsi_execute); |
| |
| |
| int scsi_execute_req(struct scsi_device *sdev, const unsigned char *cmd, |
| int data_direction, void *buffer, unsigned bufflen, |
| struct scsi_sense_hdr *sshdr, int timeout, int retries) |
| { |
| char *sense = NULL; |
| int result; |
| |
| if (sshdr) { |
| sense = kmalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); |
| if (!sense) |
| return DRIVER_ERROR << 24; |
| memset(sense, 0, SCSI_SENSE_BUFFERSIZE); |
| } |
| result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen, |
| sense, timeout, retries, 0); |
| if (sshdr) |
| scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr); |
| |
| kfree(sense); |
| return result; |
| } |
| EXPORT_SYMBOL(scsi_execute_req); |
| |
| struct scsi_io_context { |
| void *data; |
| void (*done)(void *data, char *sense, int result, int resid); |
| char sense[SCSI_SENSE_BUFFERSIZE]; |
| }; |
| |
| static kmem_cache_t *scsi_io_context_cache; |
| |
| static void scsi_end_async(struct request *req, int uptodate) |
| { |
| struct scsi_io_context *sioc = req->end_io_data; |
| |
| if (sioc->done) |
| sioc->done(sioc->data, sioc->sense, req->errors, req->data_len); |
| |
| kmem_cache_free(scsi_io_context_cache, sioc); |
| __blk_put_request(req->q, req); |
| } |
| |
| static int scsi_merge_bio(struct request *rq, struct bio *bio) |
| { |
| struct request_queue *q = rq->q; |
| |
| bio->bi_flags &= ~(1 << BIO_SEG_VALID); |
| if (rq_data_dir(rq) == WRITE) |
| bio->bi_rw |= (1 << BIO_RW); |
| blk_queue_bounce(q, &bio); |
| |
| if (!rq->bio) |
| blk_rq_bio_prep(q, rq, bio); |
| else if (!q->back_merge_fn(q, rq, bio)) |
| return -EINVAL; |
| else { |
| rq->biotail->bi_next = bio; |
| rq->biotail = bio; |
| rq->hard_nr_sectors += bio_sectors(bio); |
| rq->nr_sectors = rq->hard_nr_sectors; |
| } |
| |
| return 0; |
| } |
| |
| static int scsi_bi_endio(struct bio *bio, unsigned int bytes_done, int error) |
| { |
| if (bio->bi_size) |
| return 1; |
| |
| bio_put(bio); |
| return 0; |
| } |
| |
| /** |
| * scsi_req_map_sg - map a scatterlist into a request |
| * @rq: request to fill |
| * @sg: scatterlist |
| * @nsegs: number of elements |
| * @bufflen: len of buffer |
| * @gfp: memory allocation flags |
| * |
| * scsi_req_map_sg maps a scatterlist into a request so that the |
| * request can be sent to the block layer. We do not trust the scatterlist |
| * sent to use, as some ULDs use that struct to only organize the pages. |
| */ |
| static int scsi_req_map_sg(struct request *rq, struct scatterlist *sgl, |
| int nsegs, unsigned bufflen, gfp_t gfp) |
| { |
| struct request_queue *q = rq->q; |
| int nr_pages = (bufflen + PAGE_SIZE - 1) >> PAGE_SHIFT; |
| unsigned int data_len = 0, len, bytes, off; |
| struct page *page; |
| struct bio *bio = NULL; |
| int i, err, nr_vecs = 0; |
| |
| for (i = 0; i < nsegs; i++) { |
| page = sgl[i].page; |
| off = sgl[i].offset; |
| len = sgl[i].length; |
| data_len += len; |
| |
| while (len > 0) { |
| bytes = min_t(unsigned int, len, PAGE_SIZE - off); |
| |
| if (!bio) { |
| nr_vecs = min_t(int, BIO_MAX_PAGES, nr_pages); |
| nr_pages -= nr_vecs; |
| |
| bio = bio_alloc(gfp, nr_vecs); |
| if (!bio) { |
| err = -ENOMEM; |
| goto free_bios; |
| } |
| bio->bi_end_io = scsi_bi_endio; |
| } |
| |
| if (bio_add_pc_page(q, bio, page, bytes, off) != |
| bytes) { |
| bio_put(bio); |
| err = -EINVAL; |
| goto free_bios; |
| } |
| |
| if (bio->bi_vcnt >= nr_vecs) { |
| err = scsi_merge_bio(rq, bio); |
| if (err) { |
| bio_endio(bio, bio->bi_size, 0); |
| goto free_bios; |
| } |
| bio = NULL; |
| } |
| |
| page++; |
| len -= bytes; |
| off = 0; |
| } |
| } |
| |
| rq->buffer = rq->data = NULL; |
| rq->data_len = data_len; |
| return 0; |
| |
| free_bios: |
| while ((bio = rq->bio) != NULL) { |
| rq->bio = bio->bi_next; |
| /* |
| * call endio instead of bio_put incase it was bounced |
| */ |
| bio_endio(bio, bio->bi_size, 0); |
| } |
| |
| return err; |
| } |
| |
| /** |
| * scsi_execute_async - insert request |
| * @sdev: scsi device |
| * @cmd: scsi command |
| * @data_direction: data direction |
| * @buffer: data buffer (this can be a kernel buffer or scatterlist) |
| * @bufflen: len of buffer |
| * @use_sg: if buffer is a scatterlist this is the number of elements |
| * @timeout: request timeout in seconds |
| * @retries: number of times to retry request |
| * @flags: or into request flags |
| **/ |
| int scsi_execute_async(struct scsi_device *sdev, const unsigned char *cmd, |
| int data_direction, void *buffer, unsigned bufflen, |
| int use_sg, int timeout, int retries, void *privdata, |
| void (*done)(void *, char *, int, int), gfp_t gfp) |
| { |
| struct request *req; |
| struct scsi_io_context *sioc; |
| int err = 0; |
| int write = (data_direction == DMA_TO_DEVICE); |
| |
| sioc = kmem_cache_alloc(scsi_io_context_cache, gfp); |
| if (!sioc) |
| return DRIVER_ERROR << 24; |
| memset(sioc, 0, sizeof(*sioc)); |
| |
| req = blk_get_request(sdev->request_queue, write, gfp); |
| if (!req) |
| goto free_sense; |
| req->flags |= REQ_BLOCK_PC | REQ_QUIET; |
| |
| if (use_sg) |
| err = scsi_req_map_sg(req, buffer, use_sg, bufflen, gfp); |
| else if (bufflen) |
| err = blk_rq_map_kern(req->q, req, buffer, bufflen, gfp); |
| |
| if (err) |
| goto free_req; |
| |
| req->cmd_len = COMMAND_SIZE(cmd[0]); |
| memcpy(req->cmd, cmd, req->cmd_len); |
| req->sense = sioc->sense; |
| req->sense_len = 0; |
| req->timeout = timeout; |
| req->retries = retries; |
| req->end_io_data = sioc; |
| |
| sioc->data = privdata; |
| sioc->done = done; |
| |
| blk_execute_rq_nowait(req->q, NULL, req, 1, scsi_end_async); |
| return 0; |
| |
| free_req: |
| blk_put_request(req); |
| free_sense: |
| kfree(sioc); |
| return DRIVER_ERROR << 24; |
| } |
| EXPORT_SYMBOL_GPL(scsi_execute_async); |
| |
| /* |
| * Function: scsi_init_cmd_errh() |
| * |
| * Purpose: Initialize cmd fields related to error handling. |
| * |
| * Arguments: cmd - command that is ready to be queued. |
| * |
| * Returns: Nothing |
| * |
| * Notes: This function has the job of initializing a number of |
| * fields related to error handling. Typically this will |
| * be called once for each command, as required. |
| */ |
| static int scsi_init_cmd_errh(struct scsi_cmnd *cmd) |
| { |
| cmd->serial_number = 0; |
| |
| memset(cmd->sense_buffer, 0, sizeof cmd->sense_buffer); |
| |
| if (cmd->cmd_len == 0) |
| cmd->cmd_len = COMMAND_SIZE(cmd->cmnd[0]); |
| |
| /* |
| * We need saved copies of a number of fields - this is because |
| * error handling may need to overwrite these with different values |
| * to run different commands, and once error handling is complete, |
| * we will need to restore these values prior to running the actual |
| * command. |
| */ |
| cmd->old_use_sg = cmd->use_sg; |
| cmd->old_cmd_len = cmd->cmd_len; |
| cmd->sc_old_data_direction = cmd->sc_data_direction; |
| cmd->old_underflow = cmd->underflow; |
| memcpy(cmd->data_cmnd, cmd->cmnd, sizeof(cmd->cmnd)); |
| cmd->buffer = cmd->request_buffer; |
| cmd->bufflen = cmd->request_bufflen; |
| |
| return 1; |
| } |
| |
| /* |
| * Function: scsi_setup_cmd_retry() |
| * |
| * Purpose: Restore the command state for a retry |
| * |
| * Arguments: cmd - command to be restored |
| * |
| * Returns: Nothing |
| * |
| * Notes: Immediately prior to retrying a command, we need |
| * to restore certain fields that we saved above. |
| */ |
| void scsi_setup_cmd_retry(struct scsi_cmnd *cmd) |
| { |
| memcpy(cmd->cmnd, cmd->data_cmnd, sizeof(cmd->data_cmnd)); |
| cmd->request_buffer = cmd->buffer; |
| cmd->request_bufflen = cmd->bufflen; |
| cmd->use_sg = cmd->old_use_sg; |
| cmd->cmd_len = cmd->old_cmd_len; |
| cmd->sc_data_direction = cmd->sc_old_data_direction; |
| cmd->underflow = cmd->old_underflow; |
| } |
| |
| void scsi_device_unbusy(struct scsi_device *sdev) |
| { |
| struct Scsi_Host *shost = sdev->host; |
| unsigned long flags; |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| shost->host_busy--; |
| if (unlikely(scsi_host_in_recovery(shost) && |
| shost->host_failed)) |
| scsi_eh_wakeup(shost); |
| spin_unlock(shost->host_lock); |
| spin_lock(sdev->request_queue->queue_lock); |
| sdev->device_busy--; |
| spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags); |
| } |
| |
| /* |
| * Called for single_lun devices on IO completion. Clear starget_sdev_user, |
| * and call blk_run_queue for all the scsi_devices on the target - |
| * including current_sdev first. |
| * |
| * Called with *no* scsi locks held. |
| */ |
| static void scsi_single_lun_run(struct scsi_device *current_sdev) |
| { |
| struct Scsi_Host *shost = current_sdev->host; |
| struct scsi_device *sdev, *tmp; |
| struct scsi_target *starget = scsi_target(current_sdev); |
| unsigned long flags; |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| starget->starget_sdev_user = NULL; |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| /* |
| * Call blk_run_queue for all LUNs on the target, starting with |
| * current_sdev. We race with others (to set starget_sdev_user), |
| * but in most cases, we will be first. Ideally, each LU on the |
| * target would get some limited time or requests on the target. |
| */ |
| blk_run_queue(current_sdev->request_queue); |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| if (starget->starget_sdev_user) |
| goto out; |
| list_for_each_entry_safe(sdev, tmp, &starget->devices, |
| same_target_siblings) { |
| if (sdev == current_sdev) |
| continue; |
| if (scsi_device_get(sdev)) |
| continue; |
| |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| blk_run_queue(sdev->request_queue); |
| spin_lock_irqsave(shost->host_lock, flags); |
| |
| scsi_device_put(sdev); |
| } |
| out: |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| } |
| |
| /* |
| * Function: scsi_run_queue() |
| * |
| * Purpose: Select a proper request queue to serve next |
| * |
| * Arguments: q - last request's queue |
| * |
| * Returns: Nothing |
| * |
| * Notes: The previous command was completely finished, start |
| * a new one if possible. |
| */ |
| static void scsi_run_queue(struct request_queue *q) |
| { |
| struct scsi_device *sdev = q->queuedata; |
| struct Scsi_Host *shost = sdev->host; |
| unsigned long flags; |
| |
| if (sdev->single_lun) |
| scsi_single_lun_run(sdev); |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| while (!list_empty(&shost->starved_list) && |
| !shost->host_blocked && !shost->host_self_blocked && |
| !((shost->can_queue > 0) && |
| (shost->host_busy >= shost->can_queue))) { |
| /* |
| * As long as shost is accepting commands and we have |
| * starved queues, call blk_run_queue. scsi_request_fn |
| * drops the queue_lock and can add us back to the |
| * starved_list. |
| * |
| * host_lock protects the starved_list and starved_entry. |
| * scsi_request_fn must get the host_lock before checking |
| * or modifying starved_list or starved_entry. |
| */ |
| sdev = list_entry(shost->starved_list.next, |
| struct scsi_device, starved_entry); |
| list_del_init(&sdev->starved_entry); |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| blk_run_queue(sdev->request_queue); |
| |
| spin_lock_irqsave(shost->host_lock, flags); |
| if (unlikely(!list_empty(&sdev->starved_entry))) |
| /* |
| * sdev lost a race, and was put back on the |
| * starved list. This is unlikely but without this |
| * in theory we could loop forever. |
| */ |
| break; |
| } |
| spin_unlock_irqrestore(shost->host_lock, flags); |
| |
| blk_run_queue(q); |
| } |
| |
| /* |
| * Function: scsi_requeue_command() |
| * |
| * Purpose: Handle post-processing of completed commands. |
| * |
| * Arguments: q - queue to operate on |
| * cmd - command that may need to be requeued. |
| * |
| * Returns: Nothing |
| * |
| * Notes: After command completion, there may be blocks left |
| * over which weren't finished by the previous command |
| * this can be for a number of reasons - the main one is |
| * I/O errors in the middle of the request, in which case |
| * we need to request the blocks that come after the bad |
| * sector. |
| * Notes: Upon return, cmd is a stale pointer. |
| */ |
| static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd) |
| { |
| struct request *req = cmd->request; |
| unsigned long flags; |
| |
| scsi_unprep_request(req); |
| spin_lock_irqsave(q->queue_lock, flags); |
| blk_requeue_request(q, req); |
| spin_unlock_irqrestore(q->queue_lock, flags); |
| |
| scsi_run_queue(q); |
| } |
| |
| void scsi_next_command(struct scsi_cmnd *cmd) |
| { |
| struct scsi_device *sdev = cmd->device; |
| struct request_queue *q = sdev->request_queue; |
| |
| /* need to hold a reference on the device before we let go of the cmd */ |
| get_device(&sdev->sdev_gendev); |
| |
| scsi_put_command(cmd); |
| scsi_run_queue(q); |
| |
| /* ok to remove device now */ |
| put_device(&sdev->sdev_gendev); |
| } |
| |
| void scsi_run_host_queues(struct Scsi_Host *shost) |
| { |
| struct scsi_device *sdev; |
| |
| shost_for_each_device(sdev, shost) |
| scsi_run_queue(sdev->request_queue); |
| } |
| |
| /* |
| * Function: scsi_end_request() |
| * |
| * Purpose: Post-processing of completed commands (usually invoked at end |
| * of upper level post-processing and scsi_io_completion). |
| * |
| * Arguments: cmd - command that is complete. |
| * uptodate - 1 if I/O indicates success, <= 0 for I/O error. |
| * bytes - number of bytes of completed I/O |
| * requeue - indicates whether we should requeue leftovers. |
| * |
| * Lock status: Assumed that lock is not held upon entry. |
| * |
| * Returns: cmd if requeue required, NULL otherwise. |
| * |
| * Notes: This is called for block device requests in order to |
| * mark some number of sectors as complete. |
| * |
| * We are guaranteeing that the request queue will be goosed |
| * at some point during this call. |
| * Notes: If cmd was requeued, upon return it will be a stale pointer. |
| */ |
| static struct scsi_cmnd *scsi_end_request(struct scsi_cmnd *cmd, int uptodate, |
| int bytes, int requeue) |
| { |
| request_queue_t *q = cmd->device->request_queue; |
| struct request *req = cmd->request; |
| unsigned long flags; |
| |
| /* |
| * If there are blocks left over at the end, set up the command |
| * to queue the remainder of them. |
| */ |
| if (end_that_request_chunk(req, uptodate, bytes)) { |
| int leftover = (req->hard_nr_sectors << 9); |
| |
| if (blk_pc_request(req)) |
| leftover = req->data_len; |
| |
| /* kill remainder if no retrys */ |
| if (!uptodate && blk_noretry_request(req)) |
| end_that_request_chunk(req, 0, leftover); |
| else { |
| if (requeue) { |
| /* |
| * Bleah. Leftovers again. Stick the |
| * leftovers in the front of the |
| * queue, and goose the queue again. |
| */ |
| scsi_requeue_command(q, cmd); |
| cmd = NULL; |
| } |
| return cmd; |
| } |
| } |
| |
| add_disk_randomness(req->rq_disk); |
| |
| spin_lock_irqsave(q->queue_lock, flags); |
| if (blk_rq_tagged(req)) |
| blk_queue_end_tag(q, req); |
| end_that_request_last(req, uptodate); |
| spin_unlock_irqrestore(q->queue_lock, flags); |
| |
| /* |
| * This will goose the queue request function at the end, so we don't |
| * need to worry about launching another command. |
| */ |
| scsi_next_command(cmd); |
| return NULL; |
| } |
| |
| static struct scatterlist *scsi_alloc_sgtable(struct scsi_cmnd *cmd, gfp_t gfp_mask) |
| { |
| struct scsi_host_sg_pool *sgp; |
| struct scatterlist *sgl; |
| |
| BUG_ON(!cmd->use_sg); |
| |
| switch (cmd->use_sg) { |
| case 1 ... 8: |
| cmd->sglist_len = 0; |
| break; |
| case 9 ... 16: |
| cmd->sglist_len = 1; |
| break; |
| case 17 ... 32: |
| cmd->sglist_len = 2; |
| break; |
| #if (SCSI_MAX_PHYS_SEGMENTS > 32) |
| case 33 ... 64: |
| cmd->sglist_len = 3; |
| break; |
| #if (SCSI_MAX_PHYS_SEGMENTS > 64) |
| case 65 ... 128: |
| cmd->sglist_len = 4; |
| break; |
| #if (SCSI_MAX_PHYS_SEGMENTS > 128) |
| case 129 ... 256: |
| cmd->sglist_len = 5; |
| break; |
| #endif |
| #endif |
| #endif |
| default: |
| return NULL; |
| } |
| |
| sgp = scsi_sg_pools + cmd->sglist_len; |
| sgl = mempool_alloc(sgp->pool, gfp_mask); |
| return sgl; |
| } |
| |
| static void scsi_free_sgtable(struct scatterlist *sgl, int index) |
| { |
| struct scsi_host_sg_pool *sgp; |
| |
| BUG_ON(index >= SG_MEMPOOL_NR); |
| |
| sgp = scsi_sg_pools + index; |
| mempool_free(sgl, sgp->pool); |
| } |
| |
| /* |
| * Function: scsi_release_buffers() |
| * |
| * Purpose: Completion processing for block device I/O requests. |
| * |
| * Arguments: cmd - command that we are bailing. |
| * |
| * Lock status: Assumed that no lock is held upon entry. |
| * |
| * Returns: Nothing |
| * |
| * Notes: In the event that an upper level driver rejects a |
| * command, we must release resources allocated during |
| * the __init_io() function. Primarily this would involve |
| * the scatter-gather table, and potentially any bounce |
| * buffers. |
| */ |
| static void scsi_release_buffers(struct scsi_cmnd *cmd) |
| { |
| struct request *req = cmd->request; |
| |
| /* |
| * Free up any indirection buffers we allocated for DMA purposes. |
| */ |
| if (cmd->use_sg) |
| scsi_free_sgtable(cmd->request_buffer, cmd->sglist_len); |
| else if (cmd->request_buffer != req->buffer) |
| kfree(cmd->request_buffer); |
| |
| /* |
| * Zero these out. They now point to freed memory, and it is |
| * dangerous to hang onto the pointers. |
| */ |
| cmd->buffer = NULL; |
| cmd->bufflen = 0; |
| cmd->request_buffer = NULL; |
| cmd->request_bufflen = 0; |
| } |
| |
| /* |
| * Function: scsi_io_completion() |
| * |
| * Purpose: Completion processing for block device I/O requests. |
| * |
| * Arguments: cmd - command that is finished. |
| * |
| * Lock status: Assumed that no lock is held upon entry. |
| * |
| * Returns: Nothing |
| * |
| * Notes: This function is matched in terms of capabilities to |
| * the function that created the scatter-gather list. |
| * In other words, if there are no bounce buffers |
| * (the normal case for most drivers), we don't need |
| * the logic to deal with cleaning up afterwards. |
| * |
| * We must do one of several things here: |
| * |
| * a) Call scsi_end_request. This will finish off the |
| * specified number of sectors. If we are done, the |
| * command block will be released, and the queue |
| * function will be goosed. If we are not done, then |
| * scsi_end_request will directly goose the queue. |
| * |
| * b) We can just use scsi_requeue_command() here. This would |
| * be used if we just wanted to retry, for example. |
| */ |
| void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes, |
| unsigned int block_bytes) |
| { |
| int result = cmd->result; |
| int this_count = cmd->bufflen; |
| request_queue_t *q = cmd->device->request_queue; |
| struct request *req = cmd->request; |
| int clear_errors = 1; |
| struct scsi_sense_hdr sshdr; |
| int sense_valid = 0; |
| int sense_deferred = 0; |
| |
| /* |
| * Free up any indirection buffers we allocated for DMA purposes. |
| * For the case of a READ, we need to copy the data out of the |
| * bounce buffer and into the real buffer. |
| */ |
| if (cmd->use_sg) |
| scsi_free_sgtable(cmd->buffer, cmd->sglist_len); |
| else if (cmd->buffer != req->buffer) { |
| if (rq_data_dir(req) == READ) { |
| unsigned long flags; |
| char *to = bio_kmap_irq(req->bio, &flags); |
| memcpy(to, cmd->buffer, cmd->bufflen); |
| bio_kunmap_irq(to, &flags); |
| } |
| kfree(cmd->buffer); |
| } |
| |
| if (result) { |
| sense_valid = scsi_command_normalize_sense(cmd, &sshdr); |
| if (sense_valid) |
| sense_deferred = scsi_sense_is_deferred(&sshdr); |
| } |
| if (blk_pc_request(req)) { /* SG_IO ioctl from block level */ |
| req->errors = result; |
| if (result) { |
| clear_errors = 0; |
| if (sense_valid && req->sense) { |
| /* |
| * SG_IO wants current and deferred errors |
| */ |
| int len = 8 + cmd->sense_buffer[7]; |
| |
| if (len > SCSI_SENSE_BUFFERSIZE) |
| len = SCSI_SENSE_BUFFERSIZE; |
| memcpy(req->sense, cmd->sense_buffer, len); |
| req->sense_len = len; |
| } |
| } else |
| req->data_len = cmd->resid; |
| } |
| |
| /* |
| * Zero these out. They now point to freed memory, and it is |
| * dangerous to hang onto the pointers. |
| */ |
| cmd->buffer = NULL; |
| cmd->bufflen = 0; |
| cmd->request_buffer = NULL; |
| cmd->request_bufflen = 0; |
| |
| /* |
| * Next deal with any sectors which we were able to correctly |
| * handle. |
| */ |
| if (good_bytes >= 0) { |
| SCSI_LOG_HLCOMPLETE(1, printk("%ld sectors total, %d bytes done.\n", |
| req->nr_sectors, good_bytes)); |
| SCSI_LOG_HLCOMPLETE(1, printk("use_sg is %d\n", cmd->use_sg)); |
| |
| if (clear_errors) |
| req->errors = 0; |
| /* |
| * If multiple sectors are requested in one buffer, then |
| * they will have been finished off by the first command. |
| * If not, then we have a multi-buffer command. |
| * |
| * If block_bytes != 0, it means we had a medium error |
| * of some sort, and that we want to mark some number of |
| * sectors as not uptodate. Thus we want to inhibit |
| * requeueing right here - we will requeue down below |
| * when we handle the bad sectors. |
| */ |
| |
| /* |
| * If the command completed without error, then either |
| * finish off the rest of the command, or start a new one. |
| */ |
| if (scsi_end_request(cmd, 1, good_bytes, result == 0) == NULL) |
| return; |
| } |
| /* |
| * Now, if we were good little boys and girls, Santa left us a request |
| * sense buffer. We can extract information from this, so we |
| * can choose a block to remap, etc. |
| */ |
| if (sense_valid && !sense_deferred) { |
| switch (sshdr.sense_key) { |
| case UNIT_ATTENTION: |
| if (cmd->device->removable) { |
| /* detected disc change. set a bit |
| * and quietly refuse further access. |
| */ |
| cmd->device->changed = 1; |
| scsi_end_request(cmd, 0, |
| this_count, 1); |
| return; |
| } else { |
| /* |
| * Must have been a power glitch, or a |
| * bus reset. Could not have been a |
| * media change, so we just retry the |
| * request and see what happens. |
| */ |
| scsi_requeue_command(q, cmd); |
| return; |
| } |
| break; |
| case ILLEGAL_REQUEST: |
| /* |
| * If we had an ILLEGAL REQUEST returned, then we may |
| * have performed an unsupported command. The only |
| * thing this should be would be a ten byte read where |
| * only a six byte read was supported. Also, on a |
| * system where READ CAPACITY failed, we may have read |
| * past the end of the disk. |
| */ |
| if ((cmd->device->use_10_for_rw && |
| sshdr.asc == 0x20 && sshdr.ascq == 0x00) && |
| (cmd->cmnd[0] == READ_10 || |
| cmd->cmnd[0] == WRITE_10)) { |
| cmd->device->use_10_for_rw = 0; |
| /* |
| * This will cause a retry with a 6-byte |
| * command. |
| */ |
| scsi_requeue_command(q, cmd); |
| result = 0; |
| } else { |
| scsi_end_request(cmd, 0, this_count, 1); |
| return; |
| } |
| break; |
| case NOT_READY: |
| /* |
| * If the device is in the process of becoming ready, |
| * retry. |
| */ |
| if (sshdr.asc == 0x04 && sshdr.ascq == 0x01) { |
| scsi_requeue_command(q, cmd); |
| return; |
| } |
| if (!(req->flags & REQ_QUIET)) |
| scmd_printk(KERN_INFO, cmd, |
| "Device not ready.\n"); |
| scsi_end_request(cmd, 0, this_count, 1); |
| return; |
| case VOLUME_OVERFLOW: |
| if (!(req->flags & REQ_QUIET)) { |
| scmd_printk(KERN_INFO, cmd, |
| "Volume overflow, CDB: "); |
| __scsi_print_command(cmd->data_cmnd); |
| scsi_print_sense("", cmd); |
| } |
| scsi_end_request(cmd, 0, block_bytes, 1); |
| return; |
| default: |
| break; |
| } |
| } /* driver byte != 0 */ |
| if (host_byte(result) == DID_RESET) { |
| /* |
| * Third party bus reset or reset for error |
| * recovery reasons. Just retry the request |
| * and see what happens. |
| */ |
| scsi_requeue_command(q, cmd); |
| return; |
| } |
| if (result) { |
| if (!(req->flags & REQ_QUIET)) { |
| scmd_printk(KERN_INFO, cmd, |
| "SCSI error: return code = 0x%x\n", result); |
| |
| if (driver_byte(result) & DRIVER_SENSE) |
| scsi_print_sense("", cmd); |
| } |
| /* |
| * Mark a single buffer as not uptodate. Queue the remainder. |
| * We sometimes get this cruft in the event that a medium error |
| * isn't properly reported. |
| */ |
| block_bytes = req->hard_cur_sectors << 9; |
| if (!block_bytes) |
| block_bytes = req->data_len; |
| scsi_end_request(cmd, 0, block_bytes, 1); |
| } |
| } |
| EXPORT_SYMBOL(scsi_io_completion); |
| |
| /* |
| * Function: scsi_init_io() |
| * |
| * Purpose: SCSI I/O initialize function. |
| * |
| * Arguments: cmd - Command descriptor we wish to initialize |
| * |
| * Returns: 0 on success |
| * BLKPREP_DEFER if the failure is retryable |
| * BLKPREP_KILL if the failure is fatal |
| */ |
| static int scsi_init_io(struct scsi_cmnd *cmd) |
| { |
| struct request *req = cmd->request; |
| struct scatterlist *sgpnt; |
| int count; |
| |
| /* |
| * if this is a rq->data based REQ_BLOCK_PC, setup for a non-sg xfer |
| */ |
| if ((req->flags & REQ_BLOCK_PC) && !req->bio) { |
| cmd->request_bufflen = req->data_len; |
| cmd->request_buffer = req->data; |
| req->buffer = req->data; |
| cmd->use_sg = 0; |
| return 0; |
| } |
| |
| /* |
| * we used to not use scatter-gather for single segment request, |
| * but now we do (it makes highmem I/O easier to support without |
| * kmapping pages) |
| */ |
| cmd->use_sg = req->nr_phys_segments; |
| |
| /* |
| * if sg table allocation fails, requeue request later. |
| */ |
| sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC); |
| if (unlikely(!sgpnt)) { |
| scsi_unprep_request(req); |
| return BLKPREP_DEFER; |
| } |
| |
| cmd->request_buffer = (char *) sgpnt; |
| cmd->request_bufflen = req->nr_sectors << 9; |
| if (blk_pc_request(req)) |
| cmd->request_bufflen = req->data_len; |
| req->buffer = NULL; |
| |
| /* |
| * Next, walk the list, and fill in the addresses and sizes of |
| * each segment. |
| */ |
| count = blk_rq_map_sg(req->q, req, cmd->request_buffer); |
| |
| /* |
| * mapped well, send it off |
| */ |
| if (likely(count <= cmd->use_sg)) { |
| cmd->use_sg = count; |
| return 0; |
| } |
| |
| printk(KERN_ERR "Incorrect number of segments after building list\n"); |
| printk(KERN_ERR "counted %d, received %d\n", count, cmd->use_sg); |
| printk(KERN_ERR "req nr_sec %lu, cur_nr_sec %u\n", req->nr_sectors, |
| req->current_nr_sectors); |
| |
| /* release the command and kill it */ |
| scsi_release_buffers(cmd); |
| scsi_put_command(cmd); |
| return BLKPREP_KILL; |
| } |
| |
| static int scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk, |
| sector_t *error_sector) |
| { |
| struct scsi_device *sdev = q->queuedata; |
| struct scsi_driver *drv; |
| |
| if (sdev->sdev_state != SDEV_RUNNING) |
| return -ENXIO; |
| |
| drv = *(struct scsi_driver **) disk->private_data; |
| if (drv->issue_flush) |
| return drv->issue_flush(&sdev->sdev_gendev, error_sector); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| static void scsi_generic_done(struct scsi_cmnd *cmd) |
| { |
| BUG_ON(!blk_pc_request(cmd->request)); |
| /* |
| * This will complete the whole command with uptodate=1 so |
| * as far as the block layer is concerned the command completed |
| * successfully. Since this is a REQ_BLOCK_PC command the |
| * caller should check the request's errors value |
| */ |
| scsi_io_completion(cmd, cmd->bufflen, 0); |
| } |
| |
| void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd) |
| { |
| struct request *req = cmd->request; |
| |
| BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd)); |
| memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd)); |
| cmd->cmd_len = req->cmd_len; |
| if (!req->data_len) |
| cmd->sc_data_direction = DMA_NONE; |
| else if (rq_data_dir(req) == WRITE) |
| cmd->sc_data_direction = DMA_TO_DEVICE; |
| else |
| cmd->sc_data_direction = DMA_FROM_DEVICE; |
| |
| cmd->transfersize = req->data_len; |
| cmd->allowed = req->retries; |
| cmd->timeout_per_command = req->timeout; |
| } |
| EXPORT_SYMBOL_GPL(scsi_setup_blk_pc_cmnd); |
| |
| static int scsi_prep_fn(struct request_queue *q, struct request *req) |
| { |
| struct scsi_device *sdev = q->queuedata; |
| struct scsi_cmnd *cmd; |
| int specials_only = 0; |
| |
| /* |
| * Just check to see if the device is online. If it isn't, we |
| * refuse to process any commands. The device must be brought |
| * online before trying any recovery commands |
| */ |
| if (unlikely(!scsi_device_online(sdev))) { |
| sdev_printk(KERN_ERR, sdev, |
| "rejecting I/O to offline device\n"); |
| goto kill; |
| } |
| if (unlikely(sdev->sdev_state != SDEV_RUNNING)) { |
| /* OK, we're not in a running state don't prep |
| * user commands */ |
| if (sdev->sdev_state == SDEV_DEL) { |
| /* Device is fully deleted, no commands |
| * at all allowed down */ |
| sdev_printk(KERN_ERR, sdev, |
| "rejecting I/O to dead device\n"); |
| goto kill; |
| } |
| /* OK, we only allow special commands (i.e. not |
| * user initiated ones */ |
| specials_only = sdev->sdev_state; |
| } |
| |
| /* |
| * Find the actual device driver associated with this command. |
| * The SPECIAL requests are things like character device or |
| * ioctls, which did not originate from ll_rw_blk. Note that |
| * the special field is also used to indicate the cmd for |
| * the remainder of a partially fulfilled request that can |
| * come up when there is a medium error. We have to treat |
| * these two cases differently. We differentiate by looking |
| * at request->cmd, as this tells us the real story. |
| */ |
| if (req->flags & REQ_SPECIAL && req->special) { |
| struct scsi_request *sreq = req->special; |
| |
| if (sreq->sr_magic == SCSI_REQ_MAGIC) { |
| cmd = scsi_get_command(sreq->sr_device, GFP_ATOMIC); |
| if (unlikely(!cmd)) |
| goto defer; |
| scsi_init_cmd_from_req(cmd, sreq); |
| } else |
| cmd = req->special; |
| } else if (req->flags & (REQ_CMD | REQ_BLOCK_PC)) { |
| |
| if(unlikely(specials_only) && !(req->flags & REQ_SPECIAL)) { |
| if(specials_only == SDEV_QUIESCE || |
| specials_only == SDEV_BLOCK) |
| goto defer; |
| |
| sdev_printk(KERN_ERR, sdev, |
| "rejecting I/O to device being removed\n"); |
| goto kill; |
| } |
| |
| |
| /* |
| * Now try and find a command block that we can use. |
| */ |
| if (!req->special) { |
| cmd = scsi_get_command(sdev, GFP_ATOMIC); |
| if (unlikely(!cmd)) |
| goto defer; |
| } else |
| cmd = req->special; |
| |
| /* pull a tag out of the request if we have one */ |
| cmd->tag = req->tag; |
| } else { |
| blk_dump_rq_flags(req, "SCSI bad req"); |
| goto kill; |
| } |
| |
| /* note the overloading of req->special. When the tag |
| * is active it always means cmd. If the tag goes |
| * back for re-queueing, it may be reset */ |
| req->special = cmd; |
| cmd->request = req; |
| |
| /* |
| * FIXME: drop the lock here because the functions below |
| * expect to be called without the queue lock held. Also, |
| * previously, we dequeued the request before dropping the |
| * lock. We hope REQ_STARTED prevents anything untoward from |
| * happening now. |
| */ |
| if (req->flags & (REQ_CMD | REQ_BLOCK_PC)) { |
| struct scsi_driver *drv; |
| int ret; |
| |
| /* |
| * This will do a couple of things: |
| * 1) Fill in the actual SCSI command. |
| * 2) Fill in any other upper-level specific fields |
| * (timeout). |
| * |
| * If this returns 0, it means that the request failed |
| * (reading past end of disk, reading offline device, |
| * etc). This won't actually talk to the device, but |
| * some kinds of consistency checking may cause the |
| * request to be rejected immediately. |
| */ |
| |
| /* |
| * This sets up the scatter-gather table (allocating if |
| * required). |
| */ |
| ret = scsi_init_io(cmd); |
| switch(ret) { |
| /* For BLKPREP_KILL/DEFER the cmd was released */ |
| case BLKPREP_KILL: |
| goto kill; |
| case BLKPREP_DEFER: |
| goto defer; |
| } |
| |
| /* |
| * Initialize the actual SCSI command for this request. |
| */ |
| if (req->rq_disk) { |
| drv = *(struct scsi_driver **)req->rq_disk->private_data; |
| if (unlikely(!drv->init_command(cmd))) { |
| scsi_release_buffers(cmd); |
| scsi_put_command(cmd); |
| goto kill; |
| } |
| } else { |
| scsi_setup_blk_pc_cmnd(cmd); |
| cmd->done = scsi_generic_done; |
| } |
| } |
| |
| /* |
| * The request is now prepped, no need to come back here |
| */ |
| req->flags |= REQ_DONTPREP; |
| return BLKPREP_OK; |
| |
| defer: |
| /* If we defer, the elv_next_request() returns NULL, but the |
| * queue must be restarted, so we plug here if no returning |
| * command will automatically do that. */ |
| if (sdev->device_busy == 0) |
| blk_plug_device(q); |
| return BLKPREP_DEFER; |
| kill: |
| req->errors = DID_NO_CONNECT << 16; |
| return BLKPREP_KILL; |
| } |
| |
| /* |
| * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else |
| * return 0. |
| * |
| * Called with the queue_lock held. |
| */ |
| static inline int scsi_dev_queue_ready(struct request_queue *q, |
| struct scsi_device *sdev) |
| { |
| if (sdev->device_busy >= sdev->queue_depth) |
| return 0; |
| if (sdev->device_busy == 0 && sdev->device_blocked) { |
| /* |
| * unblock after device_blocked iterates to zero |
| */ |
| if (--sdev->device_blocked == 0) { |
| SCSI_LOG_MLQUEUE(3, |
| sdev_printk(KERN_INFO, sdev, |
| "unblocking device at zero depth\n")); |
| } else { |
| blk_plug_device(q); |
| return 0; |
| } |
| } |
| if (sdev->device_blocked) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* |
| * scsi_host_queue_ready: if we can send requests to shost, return 1 else |
| * return 0. We must end up running the queue again whenever 0 is |
| * returned, else IO can hang. |
| * |
| * Called with host_lock held. |
| */ |
| static inline int scsi_host_queue_ready(struct request_queue *q, |
| struct Scsi_Host *shost, |
| struct scsi_device *sdev) |
| { |
| if (scsi_host_in_recovery(shost)) |
| return 0; |
| if (shost->host_busy == 0 && shost->host_blocked) { |
| /* |
| * unblock after host_blocked iterates to zero |
| */ |
| if (--shost->host_blocked == 0) { |
| SCSI_LOG_MLQUEUE(3, |
| printk("scsi%d unblocking host at zero depth\n", |
| shost->host_no)); |
| } else { |
| blk_plug_device(q); |
| return 0; |
| } |
| } |
| if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) || |
| shost->host_blocked || shost->host_self_blocked) { |
| if (list_empty(&sdev->starved_entry)) |
| list_add_tail(&sdev->starved_entry, &shost->starved_list); |
| return 0; |
| } |
| |
| /* We're OK to process the command, so we can't be starved */ |
| if (!list_empty(&sdev->starved_entry)) |
| list_del_init(&sdev->starved_entry); |
| |
| return 1; |
| } |
| |
| /* |
| * Kill a request for a dead device |
| */ |
| static void scsi_kill_request(struct request *req, request_queue_t *q) |
| { |
| struct scsi_cmnd *cmd = req->special; |
| |
| blkdev_dequeue_request(req); |
| |
| if (unlikely(cmd == NULL)) { |
| printk(KERN_CRIT "impossible request in %s.\n", |
| __FUNCTION__); |
| BUG(); |
| } |
| |
| scsi_init_cmd_errh(cmd); |
| cmd->result = DID_NO_CONNECT << 16; |
| atomic_inc(&cmd->device->iorequest_cnt); |
| __scsi_done(cmd); |
| } |
| |
| static void scsi_softirq_done(struct request *rq) |
| { |
| struct scsi_cmnd *cmd = rq->completion_data; |
| unsigned long wait_for = cmd->allowed * cmd->timeout_per_command; |
| int disposition; |
| |
| INIT_LIST_HEAD(&cmd->eh_entry); |
| |
| disposition = scsi_decide_disposition(cmd); |
| if (disposition != SUCCESS && |
| time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) { |
| sdev_printk(KERN_ERR, cmd->device, |
| "timing out command, waited %lus\n", |
| wait_for/HZ); |
| disposition = SUCCESS; |
| } |
| |
| scsi_log_completion(cmd, disposition); |
| |
| switch (disposition) { |
| case SUCCESS: |
| scsi_finish_command(cmd); |
| break; |
| case NEEDS_RETRY: |
| scsi_retry_command(cmd); |
| break; |
| case ADD_TO_MLQUEUE: |
| scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY); |
| break; |
| default: |
| if (!scsi_eh_scmd_add(cmd, 0)) |
| scsi_finish_command(cmd); |
| } |
| } |
| |
| /* |
| * Function: scsi_request_fn() |
| * |
| * Purpose: Main strategy routine for SCSI. |
| * |
| * Arguments: q - Pointer to actual queue. |
| * |
| * Returns: Nothing |
| * |
| * Lock status: IO request lock assumed to be held when called. |
| */ |
| static void scsi_request_fn(struct request_queue *q) |
| { |
| struct scsi_device *sdev = q->queuedata; |
| struct Scsi_Host *shost; |
| struct scsi_cmnd *cmd; |
| struct request *req; |
| |
| if (!sdev) { |
| printk("scsi: killing requests for dead queue\n"); |
| while ((req = elv_next_request(q)) != NULL) |
| scsi_kill_request(req, q); |
| return; |
| } |
| |
| if(!get_device(&sdev->sdev_gendev)) |
| /* We must be tearing the block queue down already */ |
| return; |
| |
| /* |
| * To start with, we keep looping until the queue is empty, or until |
| * the host is no longer able to accept any more requests. |
| */ |
| shost = sdev->host; |
| while (!blk_queue_plugged(q)) { |
| int rtn; |
| /* |
| * get next queueable request. We do this early to make sure |
| * that the request is fully prepared even if we cannot |
| * accept it. |
| */ |
| req = elv_next_request(q); |
| if (!req || !scsi_dev_queue_ready(q, sdev)) |
| break; |
| |
| if (unlikely(!scsi_device_online(sdev))) { |
| sdev_printk(KERN_ERR, sdev, |
| "rejecting I/O to offline device\n"); |
| scsi_kill_request(req, q); |
| continue; |
| } |
| |
| |
| /* |
| * Remove the request from the request list. |
| */ |
| if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req))) |
| blkdev_dequeue_request(req); |
| sdev->device_busy++; |
| |
| spin_unlock(q->queue_lock); |
| cmd = req->special; |
| if (unlikely(cmd == NULL)) { |
| printk(KERN_CRIT "impossible request in %s.\n" |
| "please mail a stack trace to " |
| "linux-scsi@vger.kernel.org", |
| __FUNCTION__); |
| BUG(); |
| } |
| spin_lock(shost->host_lock); |
| |
| if (!scsi_host_queue_ready(q, shost, sdev)) |
| goto not_ready; |
| if (sdev->single_lun) { |
| if (scsi_target(sdev)->starget_sdev_user && |
| scsi_target(sdev)->starget_sdev_user != sdev) |
| goto not_ready; |
| scsi_target(sdev)->starget_sdev_user = sdev; |
| } |
| shost->host_busy++; |
| |
| /* |
| * XXX(hch): This is rather suboptimal, scsi_dispatch_cmd will |
| * take the lock again. |
| */ |
| spin_unlock_irq(shost->host_lock); |
| |
| /* |
| * Finally, initialize any error handling parameters, and set up |
| * the timers for timeouts. |
| */ |
| scsi_init_cmd_errh(cmd); |
| |
| /* |
| * Dispatch the command to the low-level driver. |
| */ |
| rtn = scsi_dispatch_cmd(cmd); |
| spin_lock_irq(q->queue_lock); |
| if(rtn) { |
| /* we're refusing the command; because of |
| * the way locks get dropped, we need to |
| * check here if plugging is required */ |
| if(sdev->device_busy == 0) |
| blk_plug_device(q); |
| |
| break; |
| } |
| } |
| |
| goto out; |
| |
| not_ready: |
| spin_unlock_irq(shost->host_lock); |
| |
| /* |
| * lock q, handle tag, requeue req, and decrement device_busy. We |
| * must return with queue_lock held. |
| * |
| * Decrementing device_busy without checking it is OK, as all such |
| * cases (host limits or settings) should run the queue at some |
| * later time. |
| */ |
| spin_lock_irq(q->queue_lock); |
| blk_requeue_request(q, req); |
| sdev->device_busy--; |
| if(sdev->device_busy == 0) |
| blk_plug_device(q); |
| out: |
| /* must be careful here...if we trigger the ->remove() function |
| * we cannot be holding the q lock */ |
| spin_unlock_irq(q->queue_lock); |
| put_device(&sdev->sdev_gendev); |
| spin_lock_irq(q->queue_lock); |
| } |
| |
| u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost) |
| { |
| struct device *host_dev; |
| u64 bounce_limit = 0xffffffff; |
| |
| if (shost->unchecked_isa_dma) |
| return BLK_BOUNCE_ISA; |
| /* |
| * Platforms with virtual-DMA translation |
| * hardware have no practical limit. |
| */ |
| if (!PCI_DMA_BUS_IS_PHYS) |
| return BLK_BOUNCE_ANY; |
| |
| host_dev = scsi_get_device(shost); |
| if (host_dev && host_dev->dma_mask) |
| bounce_limit = *host_dev->dma_mask; |
| |
| return bounce_limit; |
| } |
| EXPORT_SYMBOL(scsi_calculate_bounce_limit); |
| |
| struct request_queue *scsi_alloc_queue(struct scsi_device *sdev) |
| { |
| struct Scsi_Host *shost = sdev->host; |
| struct request_queue *q; |
| |
| q = blk_init_queue(scsi_request_fn, NULL); |
| if (!q) |
| return NULL; |
| |
| blk_queue_prep_rq(q, scsi_prep_fn); |
| |
| blk_queue_max_hw_segments(q, shost->sg_tablesize); |
| blk_queue_max_phys_segments(q, SCSI_MAX_PHYS_SEGMENTS); |
| blk_queue_max_sectors(q, shost->max_sectors); |
| blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost)); |
| blk_queue_segment_boundary(q, shost->dma_boundary); |
| blk_queue_issue_flush_fn(q, scsi_issue_flush_fn); |
| blk_queue_softirq_done(q, scsi_softirq_done); |
| |
| if (!shost->use_clustering) |
| clear_bit(QUEUE_FLAG_CLUSTER, &q->queue_flags); |
| return q; |
| } |
| |
| void scsi_free_queue(struct request_queue *q) |
| { |
| blk_cleanup_queue(q); |
| } |
| |
| /* |
| * Function: scsi_block_requests() |
| * |
| * Purpose: Utility function used by low-level drivers to prevent further |
| * commands from being queued to the device. |
| * |
| * Arguments: shost - Host in question |
| * |
| * Returns: Nothing |
| * |
| * Lock status: No locks are assumed held. |
| * |
| * Notes: There is no timer nor any other means by which the requests |
| * get unblocked other than the low-level driver calling |
| * scsi_unblock_requests(). |
| */ |
| void scsi_block_requests(struct Scsi_Host *shost) |
| { |
| shost->host_self_blocked = 1; |
| } |
| EXPORT_SYMBOL(scsi_block_requests); |
| |
| /* |
| * Function: scsi_unblock_requests() |
| * |
| * Purpose: Utility function used by low-level drivers to allow further |
| * commands from being queued to the device. |
| * |
| * Arguments: shost - Host in question |
| * |
| * Returns: Nothing |
| * |
| * Lock status: No locks are assumed held. |
| * |
| * Notes: There is no timer nor any other means by which the requests |
| * get unblocked other than the low-level driver calling |
| * scsi_unblock_requests(). |
| * |
| * This is done as an API function so that changes to the |
| * internals of the scsi mid-layer won't require wholesale |
| * changes to drivers that use this feature. |
| */ |
| void scsi_unblock_requests(struct Scsi_Host *shost) |
| { |
| shost->host_self_blocked = 0; |
| scsi_run_host_queues(shost); |
| } |
| EXPORT_SYMBOL(scsi_unblock_requests); |
| |
| int __init scsi_init_queue(void) |
| { |
| int i; |
| |
| scsi_io_context_cache = kmem_cache_create("scsi_io_context", |
| sizeof(struct scsi_io_context), |
| 0, 0, NULL, NULL); |
| if (!scsi_io_context_cache) { |
| printk(KERN_ERR "SCSI: can't init scsi io context cache\n"); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < SG_MEMPOOL_NR; i++) { |
| struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; |
| int size = sgp->size * sizeof(struct scatterlist); |
| |
| sgp->slab = kmem_cache_create(sgp->name, size, 0, |
| SLAB_HWCACHE_ALIGN, NULL, NULL); |
| if (!sgp->slab) { |
| printk(KERN_ERR "SCSI: can't init sg slab %s\n", |
| sgp->name); |
| } |
| |
| sgp->pool = mempool_create(SG_MEMPOOL_SIZE, |
| mempool_alloc_slab, mempool_free_slab, |
| sgp->slab); |
| if (!sgp->pool) { |
| printk(KERN_ERR "SCSI: can't init sg mempool %s\n", |
| sgp->name); |
| } |
| } |
| |
| return 0; |
| } |
| |
| void scsi_exit_queue(void) |
| { |
| int i; |
| |
| kmem_cache_destroy(scsi_io_context_cache); |
| |
| for (i = 0; i < SG_MEMPOOL_NR; i++) { |
| struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; |
| mempool_destroy(sgp->pool); |
| kmem_cache_destroy(sgp->slab); |
| } |
| } |
| /** |
| * scsi_mode_sense - issue a mode sense, falling back from 10 to |
| * six bytes if necessary. |
| * @sdev: SCSI device to be queried |
| * @dbd: set if mode sense will allow block descriptors to be returned |
| * @modepage: mode page being requested |
| * @buffer: request buffer (may not be smaller than eight bytes) |
| * @len: length of request buffer. |
| * @timeout: command timeout |
| * @retries: number of retries before failing |
| * @data: returns a structure abstracting the mode header data |
| * @sense: place to put sense data (or NULL if no sense to be collected). |
| * must be SCSI_SENSE_BUFFERSIZE big. |
| * |
| * Returns zero if unsuccessful, or the header offset (either 4 |
| * or 8 depending on whether a six or ten byte command was |
| * issued) if successful. |
| **/ |
| int |
| scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, |
| unsigned char *buffer, int len, int timeout, int retries, |
| struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr) { |
| unsigned char cmd[12]; |
| int use_10_for_ms; |
| int header_length; |
| int result; |
| struct scsi_sense_hdr my_sshdr; |
| |
| memset(data, 0, sizeof(*data)); |
| memset(&cmd[0], 0, 12); |
| cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */ |
| cmd[2] = modepage; |
| |
| /* caller might not be interested in sense, but we need it */ |
| if (!sshdr) |
| sshdr = &my_sshdr; |
| |
| retry: |
| use_10_for_ms = sdev->use_10_for_ms; |
| |
| if (use_10_for_ms) { |
| if (len < 8) |
| len = 8; |
| |
| cmd[0] = MODE_SENSE_10; |
| cmd[8] = len; |
| header_length = 8; |
| } else { |
| if (len < 4) |
| len = 4; |
| |
| cmd[0] = MODE_SENSE; |
| cmd[4] = len; |
| header_length = 4; |
| } |
| |
| memset(buffer, 0, len); |
| |
| result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len, |
| sshdr, timeout, retries); |
| |
| /* This code looks awful: what it's doing is making sure an |
| * ILLEGAL REQUEST sense return identifies the actual command |
| * byte as the problem. MODE_SENSE commands can return |
| * ILLEGAL REQUEST if the code page isn't supported */ |
| |
| if (use_10_for_ms && !scsi_status_is_good(result) && |
| (driver_byte(result) & DRIVER_SENSE)) { |
| if (scsi_sense_valid(sshdr)) { |
| if ((sshdr->sense_key == ILLEGAL_REQUEST) && |
| (sshdr->asc == 0x20) && (sshdr->ascq == 0)) { |
| /* |
| * Invalid command operation code |
| */ |
| sdev->use_10_for_ms = 0; |
| goto retry; |
| } |
| } |
| } |
| |
| if(scsi_status_is_good(result)) { |
| data->header_length = header_length; |
| if(use_10_for_ms) { |
| data->length = buffer[0]*256 + buffer[1] + 2; |
| data->medium_type = buffer[2]; |
| data->device_specific = buffer[3]; |
| data->longlba = buffer[4] & 0x01; |
| data->block_descriptor_length = buffer[6]*256 |
| + buffer[7]; |
| } else { |
| data->length = buffer[0] + 1; |
| data->medium_type = buffer[1]; |
| data->device_specific = buffer[2]; |
| data->block_descriptor_length = buffer[3]; |
| } |
| } |
| |
| return result; |
| } |
| EXPORT_SYMBOL(scsi_mode_sense); |
| |
| int |
| scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries) |
| { |
| char cmd[] = { |
| TEST_UNIT_READY, 0, 0, 0, 0, 0, |
| }; |
| struct scsi_sense_hdr sshdr; |
| int result; |
| |
| result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, &sshdr, |
| timeout, retries); |
| |
| if ((driver_byte(result) & DRIVER_SENSE) && sdev->removable) { |
| |
| if ((scsi_sense_valid(&sshdr)) && |
| ((sshdr.sense_key == UNIT_ATTENTION) || |
| (sshdr.sense_key == NOT_READY))) { |
| sdev->changed = 1; |
| result = 0; |
| } |
| } |
| return result; |
| } |
| EXPORT_SYMBOL(scsi_test_unit_ready); |
| |
| /** |
| * scsi_device_set_state - Take the given device through the device |
| * state model. |
| * @sdev: scsi device to change the state of. |
| * @state: state to change to. |
| * |
| * Returns zero if unsuccessful or an error if the requested |
| * transition is illegal. |
| **/ |
| int |
| scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) |
| { |
| enum scsi_device_state oldstate = sdev->sdev_state; |
| |
| if (state == oldstate) |
| return 0; |
| |
| switch (state) { |
| case SDEV_CREATED: |
| /* There are no legal states that come back to |
| * created. This is the manually initialised start |
| * state */ |
| goto illegal; |
| |
| case SDEV_RUNNING: |
| switch (oldstate) { |
| case SDEV_CREATED: |
| case SDEV_OFFLINE: |
| case SDEV_QUIESCE: |
| case SDEV_BLOCK: |
| break; |
| default: |
| goto illegal; |
| } |
| break; |
| |
| case SDEV_QUIESCE: |
| switch (oldstate) { |
| case SDEV_RUNNING: |
| case SDEV_OFFLINE: |
| break; |
| default: |
| goto illegal; |
| } |
| break; |
| |
| case SDEV_OFFLINE: |
| switch (oldstate) { |
| case SDEV_CREATED: |
| case SDEV_RUNNING: |
| case SDEV_QUIESCE: |
| case SDEV_BLOCK: |
| break; |
| default: |
| goto illegal; |
| } |
| break; |
| |
| case SDEV_BLOCK: |
| switch (oldstate) { |
| case SDEV_CREATED: |
| case SDEV_RUNNING: |
| break; |
| default: |
| goto illegal; |
| } |
| break; |
| |
| case SDEV_CANCEL: |
| switch (oldstate) { |
| case SDEV_CREATED: |
| case SDEV_RUNNING: |
| case SDEV_OFFLINE: |
| case SDEV_BLOCK: |
| break; |
| default: |
| goto illegal; |
| } |
| break; |
| |
| case SDEV_DEL: |
| switch (oldstate) { |
| case SDEV_CANCEL: |
| break; |
| default: |
| goto illegal; |
| } |
| break; |
| |
| } |
| sdev->sdev_state = state; |
| return 0; |
| |
| illegal: |
| SCSI_LOG_ERROR_RECOVERY(1, |
| sdev_printk(KERN_ERR, sdev, |
| "Illegal state transition %s->%s\n", |
| scsi_device_state_name(oldstate), |
| scsi_device_state_name(state)) |
| ); |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(scsi_device_set_state); |
| |
| /** |
| * scsi_device_quiesce - Block user issued commands. |
| * @sdev: scsi device to quiesce. |
| * |
| * This works by trying to transition to the SDEV_QUIESCE state |
| * (which must be a legal transition). When the device is in this |
| * state, only special requests will be accepted, all others will |
| * be deferred. Since special requests may also be requeued requests, |
| * a successful return doesn't guarantee the device will be |
| * totally quiescent. |
| * |
| * Must be called with user context, may sleep. |
| * |
| * Returns zero if unsuccessful or an error if not. |
| **/ |
| int |
| scsi_device_quiesce(struct scsi_device *sdev) |
| { |
| int err = scsi_device_set_state(sdev, SDEV_QUIESCE); |
| if (err) |
| return err; |
| |
| scsi_run_queue(sdev->request_queue); |
| while (sdev->device_busy) { |
| msleep_interruptible(200); |
| scsi_run_queue(sdev->request_queue); |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(scsi_device_quiesce); |
| |
| /** |
| * scsi_device_resume - Restart user issued commands to a quiesced device. |
| * @sdev: scsi device to resume. |
| * |
| * Moves the device from quiesced back to running and restarts the |
| * queues. |
| * |
| * Must be called with user context, may sleep. |
| **/ |
| void |
| scsi_device_resume(struct scsi_device *sdev) |
| { |
| if(scsi_device_set_state(sdev, SDEV_RUNNING)) |
| return; |
| scsi_run_queue(sdev->request_queue); |
| } |
| EXPORT_SYMBOL(scsi_device_resume); |
| |
| static void |
| device_quiesce_fn(struct scsi_device *sdev, void *data) |
| { |
| scsi_device_quiesce(sdev); |
| } |
| |
| void |
| scsi_target_quiesce(struct scsi_target *starget) |
| { |
| starget_for_each_device(starget, NULL, device_quiesce_fn); |
| } |
| EXPORT_SYMBOL(scsi_target_quiesce); |
| |
| static void |
| device_resume_fn(struct scsi_device *sdev, void *data) |
| { |
| scsi_device_resume(sdev); |
| } |
| |
| void |
| scsi_target_resume(struct scsi_target *starget) |
| { |
| starget_for_each_device(starget, NULL, device_resume_fn); |
| } |
| EXPORT_SYMBOL(scsi_target_resume); |
| |
| /** |
| * scsi_internal_device_block - internal function to put a device |
| * temporarily into the SDEV_BLOCK state |
| * @sdev: device to block |
| * |
| * Block request made by scsi lld's to temporarily stop all |
| * scsi commands on the specified device. Called from interrupt |
| * or normal process context. |
| * |
| * Returns zero if successful or error if not |
| * |
| * Notes: |
| * This routine transitions the device to the SDEV_BLOCK state |
| * (which must be a legal transition). When the device is in this |
| * state, all commands are deferred until the scsi lld reenables |
| * the device with scsi_device_unblock or device_block_tmo fires. |
| * This routine assumes the host_lock is held on entry. |
| **/ |
| int |
| scsi_internal_device_block(struct scsi_device *sdev) |
| { |
| request_queue_t *q = sdev->request_queue; |
| unsigned long flags; |
| int err = 0; |
| |
| err = scsi_device_set_state(sdev, SDEV_BLOCK); |
| if (err) |
| return err; |
| |
| /* |
| * The device has transitioned to SDEV_BLOCK. Stop the |
| * block layer from calling the midlayer with this device's |
| * request queue. |
| */ |
| spin_lock_irqsave(q->queue_lock, flags); |
| blk_stop_queue(q); |
| spin_unlock_irqrestore(q->queue_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(scsi_internal_device_block); |
| |
| /** |
| * scsi_internal_device_unblock - resume a device after a block request |
| * @sdev: device to resume |
| * |
| * Called by scsi lld's or the midlayer to restart the device queue |
| * for the previously suspended scsi device. Called from interrupt or |
| * normal process context. |
| * |
| * Returns zero if successful or error if not. |
| * |
| * Notes: |
| * This routine transitions the device to the SDEV_RUNNING state |
| * (which must be a legal transition) allowing the midlayer to |
| * goose the queue for this device. This routine assumes the |
| * host_lock is held upon entry. |
| **/ |
| int |
| scsi_internal_device_unblock(struct scsi_device *sdev) |
| { |
| request_queue_t *q = sdev->request_queue; |
| int err; |
| unsigned long flags; |
| |
| /* |
| * Try to transition the scsi device to SDEV_RUNNING |
| * and goose the device queue if successful. |
| */ |
| err = scsi_device_set_state(sdev, SDEV_RUNNING); |
| if (err) |
| return err; |
| |
| spin_lock_irqsave(q->queue_lock, flags); |
| blk_start_queue(q); |
| spin_unlock_irqrestore(q->queue_lock, flags); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(scsi_internal_device_unblock); |
| |
| static void |
| device_block(struct scsi_device *sdev, void *data) |
| { |
| scsi_internal_device_block(sdev); |
| } |
| |
| static int |
| target_block(struct device *dev, void *data) |
| { |
| if (scsi_is_target_device(dev)) |
| starget_for_each_device(to_scsi_target(dev), NULL, |
| device_block); |
| return 0; |
| } |
| |
| void |
| scsi_target_block(struct device *dev) |
| { |
| if (scsi_is_target_device(dev)) |
| starget_for_each_device(to_scsi_target(dev), NULL, |
| device_block); |
| else |
| device_for_each_child(dev, NULL, target_block); |
| } |
| EXPORT_SYMBOL_GPL(scsi_target_block); |
| |
| static void |
| device_unblock(struct scsi_device *sdev, void *data) |
| { |
| scsi_internal_device_unblock(sdev); |
| } |
| |
| static int |
| target_unblock(struct device *dev, void *data) |
| { |
| if (scsi_is_target_device(dev)) |
| starget_for_each_device(to_scsi_target(dev), NULL, |
| device_unblock); |
| return 0; |
| } |
| |
| void |
| scsi_target_unblock(struct device *dev) |
| { |
| if (scsi_is_target_device(dev)) |
| starget_for_each_device(to_scsi_target(dev), NULL, |
| device_unblock); |
| else |
| device_for_each_child(dev, NULL, target_unblock); |
| } |
| EXPORT_SYMBOL_GPL(scsi_target_unblock); |