blob: c1821385abfacbcc1532a25ee1bd2b0307173c09 [file] [log] [blame]
/* linux/include/asm/hardware/pl330.h
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __PL330_CORE_H
#define __PL330_CORE_H
#define PL330_MAX_CHAN 8
#define PL330_MAX_IRQS 32
#define PL330_MAX_PERI 32
enum pl330_srccachectrl {
SCCTRL0 = 0, /* Noncacheable and nonbufferable */
SCCTRL1, /* Bufferable only */
SCCTRL2, /* Cacheable, but do not allocate */
SCCTRL3, /* Cacheable and bufferable, but do not allocate */
SINVALID1,
SINVALID2,
SCCTRL6, /* Cacheable write-through, allocate on reads only */
SCCTRL7, /* Cacheable write-back, allocate on reads only */
};
enum pl330_dstcachectrl {
DCCTRL0 = 0, /* Noncacheable and nonbufferable */
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
DINVALID1, /* AWCACHE = 0x1000 */
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */
};
/* Populated by the PL330 core driver for DMA API driver's info */
struct pl330_config {
u32 periph_id;
u32 pcell_id;
#define DMAC_MODE_NS (1 << 0)
unsigned int mode;
unsigned int data_bus_width:10; /* In number of bits */
unsigned int data_buf_dep:10;
unsigned int num_chan:4;
unsigned int num_peri:6;
u32 peri_ns;
unsigned int num_events:6;
u32 irq_ns;
};
/* Handle to the DMAC provided to the PL330 core */
struct pl330_info {
/* Owning device */
struct device *dev;
/* Size of MicroCode buffers for each channel. */
unsigned mcbufsz;
/* ioremap'ed address of PL330 registers. */
void __iomem *base;
/* Client can freely use it. */
void *client_data;
/* PL330 core data, Client must not touch it. */
void *pl330_data;
/* Populated by the PL330 core driver during pl330_add */
struct pl330_config pcfg;
/*
* If the DMAC has some reset mechanism, then the
* client may want to provide pointer to the method.
*/
void (*dmac_reset)(struct pl330_info *pi);
};
enum pl330_byteswap {
SWAP_NO = 0,
SWAP_2,
SWAP_4,
SWAP_8,
SWAP_16,
};
/**
* Request Configuration.
* The PL330 core does not modify this and uses the last
* working configuration if the request doesn't provide any.
*
* The Client may want to provide this info only for the
* first request and a request with new settings.
*/
struct pl330_reqcfg {
/* Address Incrementing */
unsigned dst_inc:1;
unsigned src_inc:1;
/*
* For now, the SRC & DST protection levels
* and burst size/length are assumed same.
*/
bool nonsecure;
bool privileged;
bool insnaccess;
unsigned brst_len:5;
unsigned brst_size:3; /* in power of 2 */
enum pl330_dstcachectrl dcctl;
enum pl330_srccachectrl scctl;
enum pl330_byteswap swap;
};
/*
* One cycle of DMAC operation.
* There may be more than one xfer in a request.
*/
struct pl330_xfer {
u32 src_addr;
u32 dst_addr;
/* Size to xfer */
u32 bytes;
/*
* Pointer to next xfer in the list.
* The last xfer in the req must point to NULL.
*/
struct pl330_xfer *next;
};
/* The xfer callbacks are made with one of these arguments. */
enum pl330_op_err {
/* The all xfers in the request were success. */
PL330_ERR_NONE,
/* If req aborted due to global error. */
PL330_ERR_ABORT,
/* If req failed due to problem with Channel. */
PL330_ERR_FAIL,
};
enum pl330_reqtype {
MEMTOMEM,
MEMTODEV,
DEVTOMEM,
DEVTODEV,
};
/* A request defining Scatter-Gather List ending with NULL xfer. */
struct pl330_req {
enum pl330_reqtype rqtype;
/* Index of peripheral for the xfer. */
unsigned peri:5;
/* Unique token for this xfer, set by the client. */
void *token;
/* Callback to be called after xfer. */
void (*xfer_cb)(void *token, enum pl330_op_err err);
/* If NULL, req will be done at last set parameters. */
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
};
/*
* To know the status of the channel and DMAC, the client
* provides a pointer to this structure. The PL330 core
* fills it with current information.
*/
struct pl330_chanstatus {
/*
* If the DMAC engine halted due to some error,
* the client should remove-add DMAC.
*/
bool dmac_halted;
/*
* If channel is halted due to some error,
* the client should ABORT/FLUSH and START the channel.
*/
bool faulting;
/* Location of last load */
u32 src_addr;
/* Location of last store */
u32 dst_addr;
/*
* Pointer to the currently active req, NULL if channel is
* inactive, even though the requests may be present.
*/
struct pl330_req *top_req;
/* Pointer to req waiting second in the queue if any. */
struct pl330_req *wait_req;
};
enum pl330_chan_op {
/* Start the channel */
PL330_OP_START,
/* Abort the active xfer */
PL330_OP_ABORT,
/* Stop xfer and flush queue */
PL330_OP_FLUSH,
};
extern int pl330_add(struct pl330_info *);
extern void pl330_del(struct pl330_info *pi);
extern int pl330_update(const struct pl330_info *pi);
extern void pl330_release_channel(void *ch_id);
extern void *pl330_request_channel(const struct pl330_info *pi);
extern int pl330_chan_status(void *ch_id, struct pl330_chanstatus *pstatus);
extern int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op);
extern int pl330_submit_req(void *ch_id, struct pl330_req *r);
#endif /* __PL330_CORE_H */