| /* |
| * Broadcom specific AMBA |
| * Broadcom MIPS32 74K core driver |
| * |
| * Copyright 2009, Broadcom Corporation |
| * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de> |
| * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com> |
| * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de> |
| * |
| * Licensed under the GNU/GPL. See COPYING for details. |
| */ |
| |
| #include "bcma_private.h" |
| |
| #include <linux/bcma/bcma.h> |
| |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #include <linux/serial_reg.h> |
| #include <linux/time.h> |
| |
| /* The 47162a0 hangs when reading MIPS DMP registers registers */ |
| static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev) |
| { |
| return dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM47162 && |
| dev->bus->chipinfo.rev == 0 && dev->id.id == BCMA_CORE_MIPS_74K; |
| } |
| |
| /* The 5357b0 hangs when reading USB20H DMP registers */ |
| static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev) |
| { |
| return (dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 || |
| dev->bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) && |
| dev->bus->chipinfo.pkg == 11 && |
| dev->id.id == BCMA_CORE_USB20_HOST; |
| } |
| |
| static inline u32 mips_read32(struct bcma_drv_mips *mcore, |
| u16 offset) |
| { |
| return bcma_read32(mcore->core, offset); |
| } |
| |
| static inline void mips_write32(struct bcma_drv_mips *mcore, |
| u16 offset, |
| u32 value) |
| { |
| bcma_write32(mcore->core, offset, value); |
| } |
| |
| static const u32 ipsflag_irq_mask[] = { |
| 0, |
| BCMA_MIPS_IPSFLAG_IRQ1, |
| BCMA_MIPS_IPSFLAG_IRQ2, |
| BCMA_MIPS_IPSFLAG_IRQ3, |
| BCMA_MIPS_IPSFLAG_IRQ4, |
| }; |
| |
| static const u32 ipsflag_irq_shift[] = { |
| 0, |
| BCMA_MIPS_IPSFLAG_IRQ1_SHIFT, |
| BCMA_MIPS_IPSFLAG_IRQ2_SHIFT, |
| BCMA_MIPS_IPSFLAG_IRQ3_SHIFT, |
| BCMA_MIPS_IPSFLAG_IRQ4_SHIFT, |
| }; |
| |
| static u32 bcma_core_mips_irqflag(struct bcma_device *dev) |
| { |
| u32 flag; |
| |
| if (bcma_core_mips_bcm47162a0_quirk(dev)) |
| return dev->core_index; |
| if (bcma_core_mips_bcm5357b0_quirk(dev)) |
| return dev->core_index; |
| flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30); |
| |
| return flag & 0x1F; |
| } |
| |
| /* Get the MIPS IRQ assignment for a specified device. |
| * If unassigned, 0 is returned. |
| */ |
| unsigned int bcma_core_mips_irq(struct bcma_device *dev) |
| { |
| struct bcma_device *mdev = dev->bus->drv_mips.core; |
| u32 irqflag; |
| unsigned int irq; |
| |
| irqflag = bcma_core_mips_irqflag(dev); |
| |
| for (irq = 1; irq <= 4; irq++) |
| if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) & |
| (1 << irqflag)) |
| return irq; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(bcma_core_mips_irq); |
| |
| static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq) |
| { |
| unsigned int oldirq = bcma_core_mips_irq(dev); |
| struct bcma_bus *bus = dev->bus; |
| struct bcma_device *mdev = bus->drv_mips.core; |
| u32 irqflag; |
| |
| irqflag = bcma_core_mips_irqflag(dev); |
| BUG_ON(oldirq == 6); |
| |
| dev->irq = irq + 2; |
| |
| /* clear the old irq */ |
| if (oldirq == 0) |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) & |
| ~(1 << irqflag)); |
| else |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0); |
| |
| /* assign the new one */ |
| if (irq == 0) { |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0), |
| bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) | |
| (1 << irqflag)); |
| } else { |
| u32 oldirqflag = bcma_read32(mdev, |
| BCMA_MIPS_MIPS74K_INTMASK(irq)); |
| if (oldirqflag) { |
| struct bcma_device *core; |
| |
| /* backplane irq line is in use, find out who uses |
| * it and set user to irq 0 |
| */ |
| list_for_each_entry(core, &bus->cores, list) { |
| if ((1 << bcma_core_mips_irqflag(core)) == |
| oldirqflag) { |
| bcma_core_mips_set_irq(core, 0); |
| break; |
| } |
| } |
| } |
| bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), |
| 1 << irqflag); |
| } |
| |
| bcma_info(bus, "set_irq: core 0x%04x, irq %d => %d\n", |
| dev->id.id, oldirq + 2, irq + 2); |
| } |
| |
| static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq) |
| { |
| int i; |
| static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; |
| printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id); |
| for (i = 0; i <= 6; i++) |
| printk(" %s%s", irq_name[i], i == irq ? "*" : " "); |
| printk("\n"); |
| } |
| |
| static void bcma_core_mips_dump_irq(struct bcma_bus *bus) |
| { |
| struct bcma_device *core; |
| |
| list_for_each_entry(core, &bus->cores, list) { |
| bcma_core_mips_print_irq(core, bcma_core_mips_irq(core)); |
| } |
| } |
| |
| u32 bcma_cpu_clock(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus = mcore->core->bus; |
| |
| if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU) |
| return bcma_pmu_get_clockcpu(&bus->drv_cc); |
| |
| bcma_err(bus, "No PMU available, need this to get the cpu clock\n"); |
| return 0; |
| } |
| EXPORT_SYMBOL(bcma_cpu_clock); |
| |
| static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus = mcore->core->bus; |
| struct bcma_drv_cc *cc = &bus->drv_cc; |
| |
| switch (cc->capabilities & BCMA_CC_CAP_FLASHT) { |
| case BCMA_CC_FLASHT_STSER: |
| case BCMA_CC_FLASHT_ATSER: |
| bcma_debug(bus, "Found serial flash\n"); |
| bcma_sflash_init(cc); |
| break; |
| case BCMA_CC_FLASHT_PARA: |
| bcma_debug(bus, "Found parallel flash\n"); |
| cc->pflash.present = true; |
| cc->pflash.window = BCMA_SOC_FLASH2; |
| cc->pflash.window_size = BCMA_SOC_FLASH2_SZ; |
| |
| if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) & |
| BCMA_CC_FLASH_CFG_DS) == 0) |
| cc->pflash.buswidth = 1; |
| else |
| cc->pflash.buswidth = 2; |
| break; |
| default: |
| bcma_err(bus, "Flash type not supported\n"); |
| } |
| |
| if (cc->core->id.rev == 38 || |
| bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) { |
| if (cc->capabilities & BCMA_CC_CAP_NFLASH) { |
| bcma_debug(bus, "Found NAND flash\n"); |
| bcma_nflash_init(cc); |
| } |
| } |
| } |
| |
| void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus = mcore->core->bus; |
| |
| if (mcore->early_setup_done) |
| return; |
| |
| bcma_chipco_serial_init(&bus->drv_cc); |
| bcma_core_mips_flash_detect(mcore); |
| |
| mcore->early_setup_done = true; |
| } |
| |
| void bcma_core_mips_init(struct bcma_drv_mips *mcore) |
| { |
| struct bcma_bus *bus; |
| struct bcma_device *core; |
| bus = mcore->core->bus; |
| |
| if (mcore->setup_done) |
| return; |
| |
| bcma_info(bus, "Initializing MIPS core...\n"); |
| |
| bcma_core_mips_early_init(mcore); |
| |
| mcore->assigned_irqs = 1; |
| |
| /* Assign IRQs to all cores on the bus */ |
| list_for_each_entry(core, &bus->cores, list) { |
| int mips_irq; |
| if (core->irq) |
| continue; |
| |
| mips_irq = bcma_core_mips_irq(core); |
| if (mips_irq > 4) |
| core->irq = 0; |
| else |
| core->irq = mips_irq + 2; |
| if (core->irq > 5) |
| continue; |
| switch (core->id.id) { |
| case BCMA_CORE_PCI: |
| case BCMA_CORE_PCIE: |
| case BCMA_CORE_ETHERNET: |
| case BCMA_CORE_ETHERNET_GBIT: |
| case BCMA_CORE_MAC_GBIT: |
| case BCMA_CORE_80211: |
| case BCMA_CORE_USB20_HOST: |
| /* These devices get their own IRQ line if available, |
| * the rest goes on IRQ0 |
| */ |
| if (mcore->assigned_irqs <= 4) |
| bcma_core_mips_set_irq(core, |
| mcore->assigned_irqs++); |
| break; |
| } |
| } |
| bcma_info(bus, "IRQ reconfiguration done\n"); |
| bcma_core_mips_dump_irq(bus); |
| |
| mcore->setup_done = true; |
| } |