add BPF header files
For later ss change.
diff --git a/include/linux/filter.h b/include/linux/filter.h
new file mode 100644
index 0000000..9a46cb6
--- /dev/null
+++ b/include/linux/filter.h
@@ -0,0 +1,138 @@
+/*
+ * Linux Socket Filter Data Structures
+ */
+
+#ifndef __LINUX_FILTER_H__
+#define __LINUX_FILTER_H__
+
+
+#include <linux/types.h>
+
+
+/*
+ * Current version of the filter code architecture.
+ */
+#define BPF_MAJOR_VERSION 1
+#define BPF_MINOR_VERSION 1
+
+/*
+ * Try and keep these values and structures similar to BSD, especially
+ * the BPF code definitions which need to match so you can share filters
+ */
+
+struct sock_filter { /* Filter block */
+ __u16 code; /* Actual filter code */
+ __u8 jt; /* Jump true */
+ __u8 jf; /* Jump false */
+ __u32 k; /* Generic multiuse field */
+};
+
+struct sock_fprog { /* Required for SO_ATTACH_FILTER. */
+ unsigned short len; /* Number of filter blocks */
+ struct sock_filter *filter;
+};
+
+/*
+ * Instruction classes
+ */
+
+#define BPF_CLASS(code) ((code) & 0x07)
+#define BPF_LD 0x00
+#define BPF_LDX 0x01
+#define BPF_ST 0x02
+#define BPF_STX 0x03
+#define BPF_ALU 0x04
+#define BPF_JMP 0x05
+#define BPF_RET 0x06
+#define BPF_MISC 0x07
+
+/* ld/ldx fields */
+#define BPF_SIZE(code) ((code) & 0x18)
+#define BPF_W 0x00
+#define BPF_H 0x08
+#define BPF_B 0x10
+#define BPF_MODE(code) ((code) & 0xe0)
+#define BPF_IMM 0x00
+#define BPF_ABS 0x20
+#define BPF_IND 0x40
+#define BPF_MEM 0x60
+#define BPF_LEN 0x80
+#define BPF_MSH 0xa0
+
+/* alu/jmp fields */
+#define BPF_OP(code) ((code) & 0xf0)
+#define BPF_ADD 0x00
+#define BPF_SUB 0x10
+#define BPF_MUL 0x20
+#define BPF_DIV 0x30
+#define BPF_OR 0x40
+#define BPF_AND 0x50
+#define BPF_LSH 0x60
+#define BPF_RSH 0x70
+#define BPF_NEG 0x80
+#define BPF_MOD 0x90
+#define BPF_XOR 0xa0
+
+#define BPF_JA 0x00
+#define BPF_JEQ 0x10
+#define BPF_JGT 0x20
+#define BPF_JGE 0x30
+#define BPF_JSET 0x40
+#define BPF_SRC(code) ((code) & 0x08)
+#define BPF_K 0x00
+#define BPF_X 0x08
+
+/* ret - BPF_K and BPF_X also apply */
+#define BPF_RVAL(code) ((code) & 0x18)
+#define BPF_A 0x10
+
+/* misc */
+#define BPF_MISCOP(code) ((code) & 0xf8)
+#define BPF_TAX 0x00
+#define BPF_TXA 0x80
+
+#ifndef BPF_MAXINSNS
+#define BPF_MAXINSNS 4096
+#endif
+
+/*
+ * Macros for filter block array initializers.
+ */
+#ifndef BPF_STMT
+#define BPF_STMT(code, k) { (unsigned short)(code), 0, 0, k }
+#endif
+#ifndef BPF_JUMP
+#define BPF_JUMP(code, k, jt, jf) { (unsigned short)(code), jt, jf, k }
+#endif
+
+/*
+ * Number of scratch memory words for: BPF_ST and BPF_STX
+ */
+#define BPF_MEMWORDS 16
+
+/* RATIONALE. Negative offsets are invalid in BPF.
+ We use them to reference ancillary data.
+ Unlike introduction new instructions, it does not break
+ existing compilers/optimizers.
+ */
+#define SKF_AD_OFF (-0x1000)
+#define SKF_AD_PROTOCOL 0
+#define SKF_AD_PKTTYPE 4
+#define SKF_AD_IFINDEX 8
+#define SKF_AD_NLATTR 12
+#define SKF_AD_NLATTR_NEST 16
+#define SKF_AD_MARK 20
+#define SKF_AD_QUEUE 24
+#define SKF_AD_HATYPE 28
+#define SKF_AD_RXHASH 32
+#define SKF_AD_CPU 36
+#define SKF_AD_ALU_XOR_X 40
+#define SKF_AD_VLAN_TAG 44
+#define SKF_AD_VLAN_TAG_PRESENT 48
+#define SKF_AD_PAY_OFFSET 52
+#define SKF_AD_MAX 56
+#define SKF_NET_OFF (-0x100000)
+#define SKF_LL_OFF (-0x200000)
+
+
+#endif /* __LINUX_FILTER_H__ */
diff --git a/include/linux/packet_diag.h b/include/linux/packet_diag.h
new file mode 100644
index 0000000..b2cc0cd
--- /dev/null
+++ b/include/linux/packet_diag.h
@@ -0,0 +1,79 @@
+#ifndef __PACKET_DIAG_H__
+#define __PACKET_DIAG_H__
+
+#include <linux/types.h>
+
+struct packet_diag_req {
+ __u8 sdiag_family;
+ __u8 sdiag_protocol;
+ __u16 pad;
+ __u32 pdiag_ino;
+ __u32 pdiag_show;
+ __u32 pdiag_cookie[2];
+};
+
+#define PACKET_SHOW_INFO 0x00000001 /* Basic packet_sk information */
+#define PACKET_SHOW_MCLIST 0x00000002 /* A set of packet_diag_mclist-s */
+#define PACKET_SHOW_RING_CFG 0x00000004 /* Rings configuration parameters */
+#define PACKET_SHOW_FANOUT 0x00000008
+#define PACKET_SHOW_MEMINFO 0x00000010
+#define PACKET_SHOW_FILTER 0x00000020
+
+struct packet_diag_msg {
+ __u8 pdiag_family;
+ __u8 pdiag_type;
+ __u16 pdiag_num;
+
+ __u32 pdiag_ino;
+ __u32 pdiag_cookie[2];
+};
+
+enum {
+ PACKET_DIAG_INFO,
+ PACKET_DIAG_MCLIST,
+ PACKET_DIAG_RX_RING,
+ PACKET_DIAG_TX_RING,
+ PACKET_DIAG_FANOUT,
+ PACKET_DIAG_UID,
+ PACKET_DIAG_MEMINFO,
+ PACKET_DIAG_FILTER,
+
+ __PACKET_DIAG_MAX,
+};
+
+#define PACKET_DIAG_MAX (__PACKET_DIAG_MAX - 1)
+
+struct packet_diag_info {
+ __u32 pdi_index;
+ __u32 pdi_version;
+ __u32 pdi_reserve;
+ __u32 pdi_copy_thresh;
+ __u32 pdi_tstamp;
+ __u32 pdi_flags;
+
+#define PDI_RUNNING 0x1
+#define PDI_AUXDATA 0x2
+#define PDI_ORIGDEV 0x4
+#define PDI_VNETHDR 0x8
+#define PDI_LOSS 0x10
+};
+
+struct packet_diag_mclist {
+ __u32 pdmc_index;
+ __u32 pdmc_count;
+ __u16 pdmc_type;
+ __u16 pdmc_alen;
+ __u8 pdmc_addr[MAX_ADDR_LEN];
+};
+
+struct packet_diag_ring {
+ __u32 pdr_block_size;
+ __u32 pdr_block_nr;
+ __u32 pdr_frame_size;
+ __u32 pdr_frame_nr;
+ __u32 pdr_retire_tmo;
+ __u32 pdr_sizeof_priv;
+ __u32 pdr_features;
+};
+
+#endif
