examples/diffserv/Edge32-cb-u32

#! /bin/sh 
#
# sample script on using the ingress capabilities using u32 classifier
# This script tags tcindex based on metering on the ingress 
# interface the result is used for fast classification and re-marking
# on the egress interface
# This is an example of a color blind mode marker with PIR configured
# based on draft-wahjak-mcm-00.txt (section 3.2)
#
#path to various utilities;
#change to reflect yours.
#
IPROUTE=/root/DS-6-beta/iproute2-990530-dsing
TC=$IPROUTE/tc/tc
IP=$IPROUTE/ip/ip
INDEV=eth2
EGDEV="dev eth1"
CIR1=1000kbit
CIR2=1000kbit
# The PIR is the excess (in addition to the CIR i.e if always
# going to the PIR --> average rate is CIR+PIR)
PIR1=1000kbit
PIR2=500kbit

#The CBS is about 60 MTU sized packets
CBS1=90k
CBS2=90k
#the EBS is about 10 max sized packets
EBS1=15k
EBS2=15k
# The meters
meter1=" police rate $CIR1 burst $CBS1 "
meter1a=" police rate $PIR1 burst $EBS1 "
meter2=" police rate $CIR2 burst $CBS1 "
meter2a="police rate $PIR2 burst $CBS1 "
meter3=" police rate $CIR2 burst $CBS2 "
meter3a=" police rate $PIR2 burst $EBS2 "
meter4=" police rate $CIR1 burst $CBS2 "
meter5=" police rate $CIR1 burst $CBS2 "


# install the ingress qdisc on the ingress interface
############################################################ 
$TC qdisc add dev $INDEV handle ffff: ingress
############################################################ 
#
############################################################ 

# All packets are marked with a tcindex value which is used on the egress
# NOTE: tcindex 1 maps to AF41, 2->AF42, 3->AF43, 4->BE
# 
#anything from subnet 10.2.0.2/24 is passed on with a tcindex value 1
#if it doesnt exceed its CIR/CBS + PIR/EBS
# 
$TC filter add dev $INDEV parent ffff: protocol ip prio 1 u32 \
match ip src 10.2.0.0/24 $meter1 \
continue flowid :1
$TC filter add dev $INDEV parent ffff: protocol ip prio 2 u32 \
match ip src 10.2.0.0/24 $meter1a \
continue flowid :1

#
# if it exceeds the above but not the extra rate/burst below, it gets a 
#tcindex value  of 2
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 3 u32 \
match ip src 10.2.0.0/24 $meter2 \
continue flowid :2
$TC filter add dev $INDEV parent ffff: protocol ip prio 4 u32 \
match ip src 10.2.0.0/24 $meter2a \
continue flowid :2
#
# if it exceeds the above but not the rule below, it gets a tcindex value
# of 3
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 5 u32 \
match ip src 10.2.0.0/24 $meter3 \
continue flowid :3
$TC filter add dev $INDEV parent ffff: protocol ip prio 6 u32 \
match ip src 10.2.0.0/24 $meter3a \
drop flowid :3
#
#
# Anything else (not from the subnet 10.2.0.24/24) gets discarded if it 
# exceeds 1Mbps and by default goes to BE if it doesnt
#
$TC filter add dev $INDEV parent ffff: protocol ip prio 7 u32 \
match ip src 0/0 $meter5 \
drop flowid :4


######################## Egress side ########################


# attach a dsmarker
#
$TC qdisc add $EGDEV handle 1:0 root dsmark indices 64
#
# values of the DSCP to change depending on the class
#note that the ECN bits are masked out
#
#AF41 (0x88 is 0x22 shifted to the right by two bits)
#
$TC class change $EGDEV classid 1:1 dsmark mask 0x3 \
       value 0x88
#AF42
$TC class change $EGDEV classid 1:2 dsmark mask 0x3 \
       value 0x90
#AF43
$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
       value 0x98
#BE
$TC class change $EGDEV classid 1:3 dsmark mask 0x3 \
       value 0x0
#
#
# The class mapping
#
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
          handle 1 tcindex classid 1:1
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
          handle 2 tcindex  classid 1:2
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
          handle 3 tcindex  classid 1:3
$TC filter add $EGDEV parent 1:0 protocol ip prio 1 \
          handle 4 tcindex  classid 1:4
#

#
echo "---- qdisc parameters Ingress  ----------"
$TC qdisc ls dev $INDEV
echo "---- Class parameters Ingress  ----------"
$TC class ls dev $INDEV
echo "---- filter parameters Ingress ----------"
$TC filter ls dev $INDEV parent ffff:

echo "---- qdisc parameters Egress  ----------"
$TC qdisc ls $EGDEV
echo "---- Class parameters Egress  ----------"
$TC class ls $EGDEV
echo "---- filter parameters Egress ----------"
$TC filter ls $EGDEV parent 1:0
#
#deleting the ingress qdisc
#$TC qdisc del $INDEV ingress