| ############################################################################# |
| # |
| # Very limited CMake support for building some parts of XZ Utils |
| # |
| # For now, this is intended to be useful to build static or shared liblzma |
| # on Windows with MSVC (to avoid the need to maintain Visual Studio project |
| # files). Building liblzma on a few other platforms should work too but it |
| # is somewhat experimental and not as portable as using ./configure. |
| # |
| # On some platforms this builds also xz and xzdec, but these are |
| # highly experimental and meant for testing only: |
| # - No replacement getopt_long(), libc must have it |
| # - No sandboxing support |
| # - No translations |
| # |
| # Other missing things: |
| # - No xzgrep or other scripts or their symlinks |
| # - No xz tests (liblzma tests only) |
| # |
| # NOTE: Even if the code compiles without warnings, the end result may be |
| # different than via ./configure. Specifically, the list of #defines |
| # may be different (if so, probably this CMakeLists.txt got them wrong). |
| # |
| # This file provides the following installation components (if you only |
| # need liblzma, install only its components!): |
| # - liblzma_Runtime |
| # - liblzma_Development |
| # - xz (on some platforms only) |
| # - xzdec (on some platforms only) |
| # |
| # To find the target liblzma::liblzma from other packages, use the CONFIG |
| # option with find_package() to avoid a conflict with the FindLibLZMA module |
| # with case-insensitive file systems. For example, to require liblzma 5.2.5 |
| # or a newer compatible version: |
| # |
| # find_package(liblzma 5.2.5 REQUIRED CONFIG) |
| # target_link_libraries(my_application liblzma::liblzma) |
| # |
| ############################################################################# |
| # |
| # Author: Lasse Collin |
| # |
| # This file has been put into the public domain. |
| # You can do whatever you want with this file. |
| # |
| ############################################################################# |
| |
| cmake_minimum_required(VERSION 3.13...3.27 FATAL_ERROR) |
| |
| include(CMakePushCheckState) |
| include(CheckIncludeFile) |
| include(CheckSymbolExists) |
| include(CheckStructHasMember) |
| include(CheckCSourceCompiles) |
| include(cmake/tuklib_large_file_support.cmake) |
| include(cmake/tuklib_integer.cmake) |
| include(cmake/tuklib_cpucores.cmake) |
| include(cmake/tuklib_physmem.cmake) |
| include(cmake/tuklib_progname.cmake) |
| include(cmake/tuklib_mbstr.cmake) |
| |
| set(PACKAGE_NAME "XZ Utils") |
| set(PACKAGE_BUGREPORT "xz@tukaani.org") |
| set(PACKAGE_URL "https://xz.tukaani.org/xz-utils/") |
| |
| # Get the package version from version.h into PACKAGE_VERSION variable. |
| file(READ src/liblzma/api/lzma/version.h PACKAGE_VERSION) |
| string(REGEX REPLACE |
| "^.*\n\ |
| #define LZMA_VERSION_MAJOR ([0-9]+)\n\ |
| .*\ |
| #define LZMA_VERSION_MINOR ([0-9]+)\n\ |
| .*\ |
| #define LZMA_VERSION_PATCH ([0-9]+)\n\ |
| .*$" |
| "\\1.\\2.\\3" PACKAGE_VERSION "${PACKAGE_VERSION}") |
| |
| # Among other things, this gives us variables xz_VERSION and xz_VERSION_MAJOR. |
| project(xz VERSION "${PACKAGE_VERSION}" LANGUAGES C) |
| |
| # We need a compiler that supports enough C99 or newer (variable-length arrays |
| # aren't needed, those are optional in C17). Setting CMAKE_C_STANDARD here |
| # makes it the default for all targets. It doesn't affect the INTERFACE so |
| # liblzma::liblzma won't end up with INTERFACE_COMPILE_FEATURES "c_std_99" |
| # (the API headers are C89 and C++ compatible). |
| set(CMAKE_C_STANDARD 99) |
| set(CMAKE_C_STANDARD_REQUIRED ON) |
| |
| # On Apple OSes, don't build executables as bundles: |
| set(CMAKE_MACOSX_BUNDLE OFF) |
| |
| # windres from GNU binutils can be tricky with command line arguments |
| # that contain spaces or other funny characters. Unfortunately we need |
| # a space in PACKAGE_NAME. Using \x20 to encode the US-ASCII space seems |
| # to work in both cmd.exe and /bin/sh. |
| # |
| # However, even \x20 isn't enough in all situations, resulting in |
| # "syntax error" from windres. Using --use-temp-file prevents windres |
| # from using popen() and this seems to fix the problem. |
| # |
| # llvm-windres from Clang/LLVM 16.0.6 and older: The \x20 results |
| # in "XZx20Utils" in the compiled binary. The option --use-temp-file |
| # makes no difference. |
| # |
| # llvm-windres 17.0.0 and later: It emulates GNU windres more accurately, so |
| # the workarounds used with GNU windres must be used with llvm-windres too. |
| # |
| # CMake 3.27 doesn't have CMAKE_RC_COMPILER_ID so we rely on |
| # CMAKE_C_COMPILER_ID. |
| if((MINGW OR CYGWIN OR MSYS) AND ( |
| NOT CMAKE_C_COMPILER_ID STREQUAL "Clang" OR |
| CMAKE_C_COMPILER_VERSION VERSION_GREATER_EQUAL "17")) |
| # Use workarounds with GNU windres and llvm-windres >= 17.0.0. The \x20 |
| # in PACKAGE_NAME_DEFINITION works with gcc and clang too so we don't need |
| # to worry how to pass different flags to windres and the C compiler. |
| # Keep the original PACKAGE_NAME intact for generation of liblzma.pc. |
| string(APPEND CMAKE_RC_FLAGS " --use-temp-file") |
| string(REPLACE " " "\\x20" PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}") |
| else() |
| # Elsewhere a space is safe. This also keeps things compatible with |
| # EBCDIC in case CMake-based build is ever done on such a system. |
| set(PACKAGE_NAME_DEFINITION "${PACKAGE_NAME}") |
| endif() |
| |
| # Definitions common to all targets: |
| add_compile_definitions( |
| # Package info: |
| PACKAGE_NAME="${PACKAGE_NAME_DEFINITION}" |
| PACKAGE_BUGREPORT="${PACKAGE_BUGREPORT}" |
| PACKAGE_URL="${PACKAGE_URL}" |
| |
| # Standard headers and types are available: |
| HAVE_STDBOOL_H |
| HAVE__BOOL |
| HAVE_STDINT_H |
| HAVE_INTTYPES_H |
| |
| # Always enable CRC32 since liblzma should never build without it. |
| HAVE_CHECK_CRC32 |
| |
| # Disable assert() checks when no build type has been specified. Non-empty |
| # build types like "Release" and "Debug" handle this by default. |
| $<$<CONFIG:>:NDEBUG> |
| ) |
| |
| |
| ###################### |
| # System definitions # |
| ###################### |
| |
| # _GNU_SOURCE and such definitions. This specific macro is special since |
| # it also adds the definitions to CMAKE_REQUIRED_DEFINITIONS. |
| tuklib_use_system_extensions(ALL) |
| |
| # Check for large file support. It's required on some 32-bit platforms and |
| # even on 64-bit MinGW-w64 to get 64-bit off_t. This can be forced off on |
| # the CMake command line if needed: -DLARGE_FILE_SUPPORT=OFF |
| tuklib_large_file_support(ALL) |
| |
| # This is needed by liblzma and xz. |
| tuklib_integer(ALL) |
| |
| # This is used for liblzma.pc generation to add -lrt if needed. |
| set(LIBS) |
| |
| # Check for clock_gettime(). Do this before checking for threading so |
| # that we know there if CLOCK_MONOTONIC is available. |
| if(NOT WIN32) |
| check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME) |
| |
| if(NOT HAVE_CLOCK_GETTIME) |
| # With glibc <= 2.17 or Solaris 10 this needs librt. |
| # Add librt for the next check for HAVE_CLOCK_GETTIME. If it is |
| # found after including the library, we know that librt is required. |
| list(INSERT CMAKE_REQUIRED_LIBRARIES 0 rt) |
| check_symbol_exists(clock_gettime time.h HAVE_CLOCK_GETTIME_LIBRT) |
| |
| # If it was found now, add librt to all targets and keep it in |
| # CMAKE_REQUIRED_LIBRARIES for further tests too. |
| if(HAVE_CLOCK_GETTIME_LIBRT) |
| link_libraries(rt) |
| set(LIBS "-lrt") # For liblzma.pc |
| else() |
| list(REMOVE_AT CMAKE_REQUIRED_LIBRARIES 0) |
| endif() |
| endif() |
| |
| if(HAVE_CLOCK_GETTIME OR HAVE_CLOCK_GETTIME_LIBRT) |
| add_compile_definitions(HAVE_CLOCK_GETTIME) |
| |
| # Check if CLOCK_MONOTONIC is available for clock_gettime(). |
| check_symbol_exists(CLOCK_MONOTONIC time.h HAVE_CLOCK_MONOTONIC) |
| tuklib_add_definition_if(ALL HAVE_CLOCK_MONOTONIC) |
| endif() |
| endif() |
| |
| # Options for new enough GCC or Clang on any arch or operating system: |
| if(CMAKE_C_COMPILER_ID MATCHES GNU|Clang) |
| # configure.ac has a long list but it won't be copied here: |
| add_compile_options(-Wall -Wextra) |
| endif() |
| |
| |
| ############################################################################# |
| # liblzma |
| ############################################################################# |
| |
| option(BUILD_SHARED_LIBS "Build liblzma as a shared library instead of static") |
| |
| add_library(liblzma |
| src/common/mythread.h |
| src/common/sysdefs.h |
| src/common/tuklib_common.h |
| src/common/tuklib_config.h |
| src/common/tuklib_integer.h |
| src/common/tuklib_physmem.c |
| src/common/tuklib_physmem.h |
| src/liblzma/api/lzma.h |
| src/liblzma/api/lzma/base.h |
| src/liblzma/api/lzma/bcj.h |
| src/liblzma/api/lzma/block.h |
| src/liblzma/api/lzma/check.h |
| src/liblzma/api/lzma/container.h |
| src/liblzma/api/lzma/delta.h |
| src/liblzma/api/lzma/filter.h |
| src/liblzma/api/lzma/hardware.h |
| src/liblzma/api/lzma/index.h |
| src/liblzma/api/lzma/index_hash.h |
| src/liblzma/api/lzma/lzma12.h |
| src/liblzma/api/lzma/stream_flags.h |
| src/liblzma/api/lzma/version.h |
| src/liblzma/api/lzma/vli.h |
| src/liblzma/check/check.c |
| src/liblzma/check/check.h |
| src/liblzma/check/crc_macros.h |
| src/liblzma/common/block_util.c |
| src/liblzma/common/common.c |
| src/liblzma/common/common.h |
| src/liblzma/common/easy_preset.c |
| src/liblzma/common/easy_preset.h |
| src/liblzma/common/filter_common.c |
| src/liblzma/common/filter_common.h |
| src/liblzma/common/hardware_physmem.c |
| src/liblzma/common/index.c |
| src/liblzma/common/index.h |
| src/liblzma/common/memcmplen.h |
| src/liblzma/common/stream_flags_common.c |
| src/liblzma/common/stream_flags_common.h |
| src/liblzma/common/string_conversion.c |
| src/liblzma/common/vli_size.c |
| ) |
| |
| target_include_directories(liblzma PRIVATE |
| src/liblzma/api |
| src/liblzma/common |
| src/liblzma/check |
| src/liblzma/lz |
| src/liblzma/rangecoder |
| src/liblzma/lzma |
| src/liblzma/delta |
| src/liblzma/simple |
| src/common |
| ) |
| |
| |
| ###################### |
| # Size optimizations # |
| ###################### |
| |
| option(ENABLE_SMALL "Reduce code size at expense of speed. \ |
| This may be useful together with CMAKE_BUILD_TYPE=MinSizeRel.") |
| |
| if(ENABLE_SMALL) |
| add_compile_definitions(HAVE_SMALL) |
| endif() |
| |
| |
| ########## |
| # Checks # |
| ########## |
| |
| set(ADDITIONAL_SUPPORTED_CHECKS crc64 sha256) |
| |
| set(ADDITIONAL_CHECK_TYPES "${ADDITIONAL_SUPPORTED_CHECKS}" CACHE STRING |
| "Additional check types to support (crc32 is always built)") |
| |
| foreach(CHECK IN LISTS ADDITIONAL_CHECK_TYPES) |
| if(NOT CHECK IN_LIST ADDITIONAL_SUPPORTED_CHECKS) |
| message(FATAL_ERROR "'${CHECK}' is not a supported check type") |
| endif() |
| endforeach() |
| |
| if(ENABLE_SMALL) |
| target_sources(liblzma PRIVATE src/liblzma/check/crc32_small.c) |
| else() |
| target_sources(liblzma PRIVATE |
| src/liblzma/check/crc32_fast.c |
| src/liblzma/check/crc32_table.c |
| src/liblzma/check/crc32_table_be.h |
| src/liblzma/check/crc32_table_le.h |
| ) |
| endif() |
| |
| if("crc64" IN_LIST ADDITIONAL_CHECK_TYPES) |
| add_compile_definitions("HAVE_CHECK_CRC64") |
| |
| if(ENABLE_SMALL) |
| target_sources(liblzma PRIVATE src/liblzma/check/crc64_small.c) |
| else() |
| target_sources(liblzma PRIVATE |
| src/liblzma/check/crc64_fast.c |
| src/liblzma/check/crc64_table.c |
| src/liblzma/check/crc64_table_be.h |
| src/liblzma/check/crc64_table_le.h |
| ) |
| endif() |
| endif() |
| |
| if("sha256" IN_LIST ADDITIONAL_CHECK_TYPES) |
| add_compile_definitions("HAVE_CHECK_SHA256") |
| target_sources(liblzma PRIVATE src/liblzma/check/sha256.c) |
| endif() |
| |
| |
| ################# |
| # Match finders # |
| ################# |
| |
| set(SUPPORTED_MATCH_FINDERS hc3 hc4 bt2 bt3 bt4) |
| |
| set(MATCH_FINDERS "${SUPPORTED_MATCH_FINDERS}" CACHE STRING |
| "Match finders to support (at least one is required for LZMA1 or LZMA2)") |
| |
| foreach(MF IN LISTS MATCH_FINDERS) |
| if(MF IN_LIST SUPPORTED_MATCH_FINDERS) |
| string(TOUPPER "${MF}" MF_UPPER) |
| add_compile_definitions("HAVE_MF_${MF_UPPER}") |
| else() |
| message(FATAL_ERROR "'${MF}' is not a supported match finder") |
| endif() |
| endforeach() |
| |
| |
| ############# |
| # Threading # |
| ############# |
| |
| # Supported threading methods: |
| # ON - autodetect the best threading method. The autodetection will |
| # prefer Windows threading (win95 or vista) over posix if both are |
| # available. vista threads will be used over win95 unless it is a |
| # 32-bit build. |
| # OFF - Disable threading. |
| # posix - Use posix threading (pthreads), or throw an error if not available. |
| # win95 - Use Windows win95 threading, or throw an error if not available. |
| # vista - Use Windows vista threading, or throw an error if not available. |
| set(SUPPORTED_THREADING_METHODS ON OFF posix win95 vista) |
| |
| set(ENABLE_THREADS ON CACHE STRING |
| "Threading method: Set to 'ON' to autodetect, 'OFF' to disable threading.") |
| |
| # Create dropdown in CMake GUI since only 1 threading method is possible |
| # to select in a build. |
| set_property(CACHE ENABLE_THREADS |
| PROPERTY STRINGS "${SUPPORTED_THREADING_METHODS}") |
| |
| # This is a flag variable set when win95 threads are used. We must ensure |
| # the combination of enable_small and win95 threads is not used without a |
| # compiler supporting attribute __constructor__. |
| set(USE_WIN95_THREADS OFF) |
| |
| # This is a flag variable set when posix threads (pthreads) are used. |
| # It's needed when creating liblzma-config.cmake where dependency on |
| # Threads::Threads is only needed with pthreads. |
| set(USE_POSIX_THREADS OFF) |
| |
| if(NOT ENABLE_THREADS IN_LIST SUPPORTED_THREADING_METHODS) |
| message(FATAL_ERROR "'${ENABLE_THREADS}' is not a supported " |
| "threading method") |
| endif() |
| |
| if(ENABLE_THREADS) |
| # Also set THREADS_PREFER_PTHREAD_FLAG since the flag has no effect |
| # for Windows threading. |
| set(THREADS_PREFER_PTHREAD_FLAG TRUE) |
| find_package(Threads REQUIRED) |
| |
| # If both Windows and posix threading are available, prefer Windows. |
| # Note that on Cygwin CMAKE_USE_WIN32_THREADS_INIT is false. |
| if(CMAKE_USE_WIN32_THREADS_INIT AND NOT ENABLE_THREADS STREQUAL "posix") |
| if(ENABLE_THREADS STREQUAL "win95" |
| OR (ENABLE_THREADS STREQUAL "ON" |
| AND CMAKE_SIZEOF_VOID_P EQUAL 4)) |
| # Use Windows 95 (and thus XP) compatible threads. |
| # This avoids use of features that were added in |
| # Windows Vista. This is used for 32-bit x86 builds for |
| # compatibility reasons since it makes no measurable difference |
| # in performance compared to Vista threads. |
| set(USE_WIN95_THREADS ON) |
| add_compile_definitions(MYTHREAD_WIN95) |
| else() |
| add_compile_definitions(MYTHREAD_VISTA) |
| endif() |
| elseif(CMAKE_USE_PTHREADS_INIT) |
| if(ENABLE_THREADS STREQUAL "posix" OR ENABLE_THREADS STREQUAL "ON") |
| # The threading library only needs to be explicitly linked |
| # for posix threads, so this is needed for creating |
| # liblzma-config.cmake later. |
| set(USE_POSIX_THREADS ON) |
| |
| target_link_libraries(liblzma Threads::Threads) |
| add_compile_definitions(MYTHREAD_POSIX) |
| |
| # Check if pthread_condattr_setclock() exists to |
| # use CLOCK_MONOTONIC. |
| if(HAVE_CLOCK_MONOTONIC) |
| list(INSERT CMAKE_REQUIRED_LIBRARIES 0 |
| "${CMAKE_THREAD_LIBS_INIT}") |
| check_symbol_exists(pthread_condattr_setclock pthread.h |
| HAVE_PTHREAD_CONDATTR_SETCLOCK) |
| tuklib_add_definition_if(ALL HAVE_PTHREAD_CONDATTR_SETCLOCK) |
| endif() |
| else() |
| message(SEND_ERROR |
| "Windows threading method was requested but a compatible " |
| "library could not be found") |
| endif() |
| else() |
| message(SEND_ERROR "No supported threading library found") |
| endif() |
| |
| target_sources(liblzma PRIVATE |
| src/common/tuklib_cpucores.c |
| src/common/tuklib_cpucores.h |
| src/liblzma/common/hardware_cputhreads.c |
| src/liblzma/common/outqueue.c |
| src/liblzma/common/outqueue.h |
| ) |
| endif() |
| |
| |
| ############ |
| # Encoders # |
| ############ |
| |
| set(SIMPLE_FILTERS |
| x86 |
| arm |
| armthumb |
| arm64 |
| powerpc |
| ia64 |
| sparc |
| ) |
| |
| # The SUPPORTED_FILTERS are shared between Encoders and Decoders |
| # since only lzip does not appear in both lists. lzip is a special |
| # case anyway, so it is handled separately in the Decoders section. |
| set(SUPPORTED_FILTERS |
| lzma1 |
| lzma2 |
| delta |
| "${SIMPLE_FILTERS}" |
| ) |
| |
| set(ENCODERS "${SUPPORTED_FILTERS}" CACHE STRING "Encoders to support") |
| |
| # If LZMA2 is enabled, then LZMA1 must also be enabled. |
| if(NOT "lzma1" IN_LIST ENCODERS AND "lzma2" IN_LIST ENCODERS) |
| message(FATAL_ERROR "LZMA2 encoder requires that LZMA1 is also enabled") |
| endif() |
| |
| # If LZMA1 is enabled, then at least one match finder must be enabled. |
| if(MATCH_FINDERS STREQUAL "" AND "lzma1" IN_LIST ENCODERS) |
| message(FATAL_ERROR "At least 1 match finder is required for an " |
| "LZ-based encoder") |
| endif() |
| |
| set(HAVE_DELTA_CODER OFF) |
| set(SIMPLE_ENCODERS OFF) |
| set(HAVE_ENCODERS OFF) |
| |
| foreach(ENCODER IN LISTS ENCODERS) |
| if(ENCODER IN_LIST SUPPORTED_FILTERS) |
| set(HAVE_ENCODERS ON) |
| |
| if(NOT SIMPLE_ENCODERS AND ENCODER IN_LIST SIMPLE_FILTERS) |
| set(SIMPLE_ENCODERS ON) |
| endif() |
| |
| string(TOUPPER "${ENCODER}" ENCODER_UPPER) |
| add_compile_definitions("HAVE_ENCODER_${ENCODER_UPPER}") |
| else() |
| message(FATAL_ERROR "'${ENCODER}' is not a supported encoder") |
| endif() |
| endforeach() |
| |
| if(HAVE_ENCODERS) |
| add_compile_definitions(HAVE_ENCODERS) |
| |
| target_sources(liblzma PRIVATE |
| src/liblzma/common/alone_encoder.c |
| src/liblzma/common/block_buffer_encoder.c |
| src/liblzma/common/block_buffer_encoder.h |
| src/liblzma/common/block_encoder.c |
| src/liblzma/common/block_encoder.h |
| src/liblzma/common/block_header_encoder.c |
| src/liblzma/common/easy_buffer_encoder.c |
| src/liblzma/common/easy_encoder.c |
| src/liblzma/common/easy_encoder_memusage.c |
| src/liblzma/common/filter_buffer_encoder.c |
| src/liblzma/common/filter_encoder.c |
| src/liblzma/common/filter_encoder.h |
| src/liblzma/common/filter_flags_encoder.c |
| src/liblzma/common/index_encoder.c |
| src/liblzma/common/index_encoder.h |
| src/liblzma/common/stream_buffer_encoder.c |
| src/liblzma/common/stream_encoder.c |
| src/liblzma/common/stream_flags_encoder.c |
| src/liblzma/common/vli_encoder.c |
| ) |
| |
| if(ENABLE_THREADS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/common/stream_encoder_mt.c |
| ) |
| endif() |
| |
| if(SIMPLE_ENCODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/simple/simple_encoder.c |
| src/liblzma/simple/simple_encoder.h |
| ) |
| endif() |
| |
| if("lzma1" IN_LIST ENCODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/lzma/lzma_encoder.c |
| src/liblzma/lzma/lzma_encoder.h |
| src/liblzma/lzma/lzma_encoder_optimum_fast.c |
| src/liblzma/lzma/lzma_encoder_optimum_normal.c |
| src/liblzma/lzma/lzma_encoder_private.h |
| src/liblzma/lzma/fastpos.h |
| src/liblzma/lz/lz_encoder.c |
| src/liblzma/lz/lz_encoder.h |
| src/liblzma/lz/lz_encoder_hash.h |
| src/liblzma/lz/lz_encoder_hash_table.h |
| src/liblzma/lz/lz_encoder_mf.c |
| src/liblzma/rangecoder/price.h |
| src/liblzma/rangecoder/price_table.c |
| src/liblzma/rangecoder/range_encoder.h |
| ) |
| |
| if(NOT ENABLE_SMALL) |
| target_sources(liblzma PRIVATE src/liblzma/lzma/fastpos_table.c) |
| endif() |
| endif() |
| |
| if("lzma2" IN_LIST ENCODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/lzma/lzma2_encoder.c |
| src/liblzma/lzma/lzma2_encoder.h |
| ) |
| endif() |
| |
| if("delta" IN_LIST ENCODERS) |
| set(HAVE_DELTA_CODER ON) |
| target_sources(liblzma PRIVATE |
| src/liblzma/delta/delta_encoder.c |
| src/liblzma/delta/delta_encoder.h |
| ) |
| endif() |
| endif() |
| |
| |
| ############ |
| # Decoders # |
| ############ |
| |
| set(DECODERS "${SUPPORTED_FILTERS}" CACHE STRING "Decoders to support") |
| |
| set(SIMPLE_DECODERS OFF) |
| set(HAVE_DECODERS OFF) |
| |
| foreach(DECODER IN LISTS DECODERS) |
| if(DECODER IN_LIST SUPPORTED_FILTERS) |
| set(HAVE_DECODERS ON) |
| |
| if(NOT SIMPLE_DECODERS AND DECODER IN_LIST SIMPLE_FILTERS) |
| set(SIMPLE_DECODERS ON) |
| endif() |
| |
| string(TOUPPER "${DECODER}" DECODER_UPPER) |
| add_compile_definitions("HAVE_DECODER_${DECODER_UPPER}") |
| else() |
| message(FATAL_ERROR "'${DECODER}' is not a supported decoder") |
| endif() |
| endforeach() |
| |
| if(HAVE_DECODERS) |
| add_compile_definitions(HAVE_DECODERS) |
| |
| target_sources(liblzma PRIVATE |
| src/liblzma/common/alone_decoder.c |
| src/liblzma/common/alone_decoder.h |
| src/liblzma/common/auto_decoder.c |
| src/liblzma/common/block_buffer_decoder.c |
| src/liblzma/common/block_decoder.c |
| src/liblzma/common/block_decoder.h |
| src/liblzma/common/block_header_decoder.c |
| src/liblzma/common/easy_decoder_memusage.c |
| src/liblzma/common/file_info.c |
| src/liblzma/common/filter_buffer_decoder.c |
| src/liblzma/common/filter_decoder.c |
| src/liblzma/common/filter_decoder.h |
| src/liblzma/common/filter_flags_decoder.c |
| src/liblzma/common/index_decoder.c |
| src/liblzma/common/index_decoder.h |
| src/liblzma/common/index_hash.c |
| src/liblzma/common/stream_buffer_decoder.c |
| src/liblzma/common/stream_decoder.c |
| src/liblzma/common/stream_flags_decoder.c |
| src/liblzma/common/stream_decoder.h |
| src/liblzma/common/vli_decoder.c |
| ) |
| |
| if(ENABLE_THREADS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/common/stream_decoder_mt.c |
| ) |
| endif() |
| |
| if(SIMPLE_DECODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/simple/simple_decoder.c |
| src/liblzma/simple/simple_decoder.h |
| ) |
| endif() |
| |
| if("lzma1" IN_LIST DECODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/lzma/lzma_decoder.c |
| src/liblzma/lzma/lzma_decoder.h |
| src/liblzma/rangecoder/range_decoder.h |
| src/liblzma/lz/lz_decoder.c |
| src/liblzma/lz/lz_decoder.h |
| ) |
| endif() |
| |
| if("lzma2" IN_LIST DECODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/lzma/lzma2_decoder.c |
| src/liblzma/lzma/lzma2_decoder.h |
| ) |
| endif() |
| |
| if("delta" IN_LIST DECODERS) |
| set(HAVE_DELTA_CODER ON) |
| target_sources(liblzma PRIVATE |
| src/liblzma/delta/delta_decoder.c |
| src/liblzma/delta/delta_decoder.h |
| ) |
| endif() |
| endif() |
| |
| # Some sources must appear if the filter is configured as either |
| # an encoder or decoder. |
| if("lzma1" IN_LIST ENCODERS OR "lzma1" IN_LIST DECODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/rangecoder/range_common.h |
| src/liblzma/lzma/lzma_encoder_presets.c |
| src/liblzma/lzma/lzma_common.h |
| ) |
| endif() |
| |
| if(HAVE_DELTA_CODER) |
| target_sources(liblzma PRIVATE |
| src/liblzma/delta/delta_common.c |
| src/liblzma/delta/delta_common.h |
| src/liblzma/delta/delta_private.h |
| ) |
| endif() |
| |
| if(SIMPLE_ENCODERS OR SIMPLE_DECODERS) |
| target_sources(liblzma PRIVATE |
| src/liblzma/simple/simple_coder.c |
| src/liblzma/simple/simple_coder.h |
| src/liblzma/simple/simple_private.h |
| ) |
| endif() |
| |
| foreach(SIMPLE_CODER IN LISTS SIMPLE_FILTERS) |
| if(SIMPLE_CODER IN_LIST ENCODERS OR SIMPLE_CODER IN_LIST DECODERS) |
| target_sources(liblzma PRIVATE "src/liblzma/simple/${SIMPLE_CODER}.c") |
| endif() |
| endforeach() |
| |
| |
| ############# |
| # MicroLZMA # |
| ############# |
| |
| option(MICROLZMA_ENCODER |
| "MicroLZMA encoder (needed by specific applications only)" ON) |
| |
| option(MICROLZMA_DECODER |
| "MicroLZMA decoder (needed by specific applications only)" ON) |
| |
| if(MICROLZMA_ENCODER) |
| if(NOT "lzma1" IN_LIST ENCODERS) |
| message(FATAL_ERROR "The LZMA1 encoder is required to support the " |
| "MicroLZMA encoder") |
| endif() |
| |
| target_sources(liblzma PRIVATE src/liblzma/common/microlzma_encoder.c) |
| endif() |
| |
| if(MICROLZMA_DECODER) |
| if(NOT "lzma1" IN_LIST DECODERS) |
| message(FATAL_ERROR "The LZMA1 decoder is required to support the " |
| "MicroLZMA decoder") |
| endif() |
| |
| target_sources(liblzma PRIVATE src/liblzma/common/microlzma_decoder.c) |
| endif() |
| |
| |
| ############################# |
| # lzip (.lz) format support # |
| ############################# |
| |
| option(LZIP_DECODER "Support lzip decoder" ON) |
| |
| if(LZIP_DECODER) |
| # If lzip decoder support is requested, make sure LZMA1 decoder is enabled. |
| if(NOT "lzma1" IN_LIST DECODERS) |
| message(FATAL_ERROR "The LZMA1 decoder is required to support the " |
| "lzip decoder") |
| endif() |
| |
| add_compile_definitions(HAVE_LZIP_DECODER) |
| |
| target_sources(liblzma PRIVATE |
| src/liblzma/common/lzip_decoder.c |
| src/liblzma/common/lzip_decoder.h |
| ) |
| endif() |
| |
| ### |
| |
| # Put the tuklib functions under the lzma_ namespace. |
| target_compile_definitions(liblzma PRIVATE TUKLIB_SYMBOL_PREFIX=lzma_) |
| tuklib_cpucores(liblzma) |
| tuklib_physmem(liblzma) |
| |
| # While liblzma can be built without tuklib_cpucores or tuklib_physmem |
| # modules, the liblzma API functions lzma_cputhreads() and lzma_physmem() |
| # will then be useless (which isn't too bad but still unfortunate). Since |
| # I expect the CMake-based builds to be only used on systems that are |
| # supported by these tuklib modules, problems with these tuklib modules |
| # are considered a hard error for now. This hopefully helps to catch bugs |
| # in the CMake versions of the tuklib checks. |
| if(NOT TUKLIB_CPUCORES_FOUND OR NOT TUKLIB_PHYSMEM_FOUND) |
| # Use SEND_ERROR instead of FATAL_ERROR. If someone reports a bug, |
| # seeing the results of the remaining checks can be useful too. |
| message(SEND_ERROR |
| "tuklib_cpucores() or tuklib_physmem() failed. " |
| "Unless you really are building for a system where these " |
| "modules are not supported (unlikely), this is a bug in the " |
| "included cmake/tuklib_*.cmake files that should be fixed. " |
| "To build anyway, edit this CMakeLists.txt to ignore this error.") |
| endif() |
| |
| # Check for __attribute__((__constructor__)) support. |
| # This needs -Werror because some compilers just warn |
| # about this being unsupported. |
| cmake_push_check_state() |
| set(CMAKE_REQUIRED_FLAGS "-Werror") |
| check_c_source_compiles(" |
| __attribute__((__constructor__)) |
| static void my_constructor_func(void) { return; } |
| int main(void) { return 0; } |
| " |
| HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR) |
| cmake_pop_check_state() |
| tuklib_add_definition_if(liblzma HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR) |
| |
| # The Win95 threading lacks a thread-safe one-time initialization function. |
| # The one-time initialization is needed for crc32_small.c and crc64_small.c |
| # create the CRC tables. So if small mode is enabled, the threading mode is |
| # win95, and the compiler does not support attribute constructor, then we |
| # would end up with a multithreaded build that is thread-unsafe. As a |
| # result this configuration is not allowed. |
| if(USE_WIN95_THREADS AND ENABLE_SMALL AND NOT HAVE_FUNC_ATTRIBUTE_CONSTRUCTOR) |
| message(SEND_ERROR "Threading method win95 and ENABLE_SMALL " |
| "cannot be used at the same time with a compiler " |
| "that doesn't support " |
| "__attribute__((__constructor__))") |
| endif() |
| |
| # cpuid.h |
| check_include_file(cpuid.h HAVE_CPUID_H) |
| tuklib_add_definition_if(liblzma HAVE_CPUID_H) |
| |
| # immintrin.h: |
| check_include_file(immintrin.h HAVE_IMMINTRIN_H) |
| if(HAVE_IMMINTRIN_H) |
| target_compile_definitions(liblzma PRIVATE HAVE_IMMINTRIN_H) |
| |
| # SSE2 intrinsics: |
| check_c_source_compiles(" |
| #include <immintrin.h> |
| int main(void) |
| { |
| __m128i x = { 0 }; |
| _mm_movemask_epi8(x); |
| return 0; |
| } |
| " |
| HAVE__MM_MOVEMASK_EPI8) |
| tuklib_add_definition_if(liblzma HAVE__MM_MOVEMASK_EPI8) |
| |
| # CLMUL intrinsic: |
| option(ALLOW_CLMUL_CRC "Allow carryless multiplication for CRC \ |
| calculation if supported by the system" ON) |
| |
| if(ALLOW_CLMUL_CRC) |
| check_c_source_compiles(" |
| #include <immintrin.h> |
| #if defined(__e2k__) && __iset__ < 6 |
| # error |
| #endif |
| #if (defined(__GNUC__) || defined(__clang__)) \ |
| && !defined(__EDG__) |
| __attribute__((__target__(\"ssse3,sse4.1,pclmul\"))) |
| #endif |
| __m128i my_clmul(__m128i a) |
| { |
| const __m128i b = _mm_set_epi64x(1, 2); |
| return _mm_clmulepi64_si128(a, b, 0); |
| } |
| int main(void) { return 0; } |
| " |
| HAVE_USABLE_CLMUL) |
| tuklib_add_definition_if(liblzma HAVE_USABLE_CLMUL) |
| endif() |
| endif() |
| |
| # Support -fvisiblity=hidden when building shared liblzma. |
| # These lines do nothing on Windows (even under Cygwin). |
| # HAVE_VISIBILITY should always be defined to 0 or 1. |
| if(BUILD_SHARED_LIBS) |
| set_target_properties(liblzma PROPERTIES C_VISIBILITY_PRESET hidden) |
| target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=1) |
| else() |
| target_compile_definitions(liblzma PRIVATE HAVE_VISIBILITY=0) |
| endif() |
| |
| if(WIN32) |
| if(BUILD_SHARED_LIBS) |
| # Add the Windows resource file for liblzma.dll. |
| target_sources(liblzma PRIVATE src/liblzma/liblzma_w32res.rc) |
| |
| set_target_properties(liblzma PROPERTIES |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc" |
| ) |
| |
| # Export the public API symbols with __declspec(dllexport). |
| target_compile_definitions(liblzma PRIVATE DLL_EXPORT) |
| |
| if(NOT MSVC) |
| # Create a DEF file. The linker puts the ordinal numbers there |
| # too so the output from the linker isn't our final file. |
| target_link_options(liblzma PRIVATE |
| "-Wl,--output-def,liblzma.def.in") |
| |
| # Remove the ordinal numbers from the DEF file so that |
| # no one will create an import library that links by ordinal |
| # instead of by name. We don't maintain a DEF file so the |
| # ordinal numbers aren't stable. |
| add_custom_command(TARGET liblzma POST_BUILD |
| COMMAND "${CMAKE_COMMAND}" |
| -DINPUT_FILE=liblzma.def.in |
| -DOUTPUT_FILE=liblzma.def |
| -P |
| "${CMAKE_CURRENT_SOURCE_DIR}/cmake/remove-ordinals.cmake" |
| BYPRODUCTS "liblzma.def" |
| VERBATIM) |
| endif() |
| else() |
| # Disable __declspec(dllimport) when linking against static liblzma. |
| target_compile_definitions(liblzma INTERFACE LZMA_API_STATIC) |
| endif() |
| elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "Linux") |
| # GNU/Linux-specific symbol versioning for shared liblzma. |
| # Note that adding link options doesn't affect static builds |
| # but HAVE_SYMBOL_VERSIONS_LINUX must not be used with static builds |
| # because it would put symbol versions into the static library which |
| # can cause problems. It's clearer if all symver related things are |
| # omitted when not building a shared library. |
| # |
| # NOTE: Set it explicitly to 1 to make it clear that versioning is |
| # done unconditionally in the C files. |
| target_compile_definitions(liblzma PRIVATE HAVE_SYMBOL_VERSIONS_LINUX=1) |
| target_link_options(liblzma PRIVATE |
| "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map" |
| ) |
| set_target_properties(liblzma PROPERTIES |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_linux.map" |
| ) |
| elseif(BUILD_SHARED_LIBS AND CMAKE_SYSTEM_NAME STREQUAL "FreeBSD") |
| # Symbol versioning for shared liblzma for non-GNU/Linux. |
| # FIXME? What about Solaris? |
| target_link_options(liblzma PRIVATE |
| "-Wl,--version-script=${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map" |
| ) |
| set_target_properties(liblzma PROPERTIES |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/liblzma/liblzma_generic.map" |
| ) |
| endif() |
| |
| set_target_properties(liblzma PROPERTIES |
| # At least for now the package versioning matches the rules used for |
| # shared library versioning (excluding development releases) so it is |
| # fine to use the package version here. |
| SOVERSION "${xz_VERSION_MAJOR}" |
| VERSION "${xz_VERSION}" |
| |
| # It's liblzma.so or liblzma.dll, not libliblzma.so or lzma.dll. |
| # Avoid the name lzma.dll because it would conflict with LZMA SDK. |
| PREFIX "" |
| IMPORT_PREFIX "" |
| ) |
| |
| # Create liblzma-config-version.cmake. |
| # |
| # FIXME: SameMajorVersion is correct for stable releases but it is wrong |
| # for development releases where each release may have incompatible changes. |
| include(CMakePackageConfigHelpers) |
| write_basic_package_version_file( |
| "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake" |
| VERSION "${liblzma_VERSION}" |
| COMPATIBILITY SameMajorVersion) |
| |
| # Create liblzma-config.cmake. We use this spelling instead of |
| # liblzmaConfig.cmake to make find_package work in case insensitive |
| # manner even with case sensitive file systems. This gives more consistent |
| # behavior between operating systems. This optionally includes a dependency |
| # on a threading library, so the contents are created in two separate parts. |
| # The "second half" is always needed, so create it first. |
| set(LZMA_CONFIG_CONTENTS |
| "include(\"\${CMAKE_CURRENT_LIST_DIR}/liblzma-targets.cmake\") |
| |
| if(NOT TARGET LibLZMA::LibLZMA) |
| # Be compatible with the spelling used by the FindLibLZMA module. This |
| # doesn't use ALIAS because it would make CMake resolve LibLZMA::LibLZMA |
| # to liblzma::liblzma instead of keeping the original spelling. Keeping |
| # the original spelling is important for good FindLibLZMA compatibility. |
| add_library(LibLZMA::LibLZMA INTERFACE IMPORTED) |
| set_target_properties(LibLZMA::LibLZMA PROPERTIES |
| INTERFACE_LINK_LIBRARIES liblzma::liblzma) |
| endif() |
| ") |
| |
| if(USE_POSIX_THREADS) |
| set(LZMA_CONFIG_CONTENTS |
| "include(CMakeFindDependencyMacro) |
| set(THREADS_PREFER_PTHREAD_FLAG TRUE) |
| find_dependency(Threads) |
| |
| ${LZMA_CONFIG_CONTENTS} |
| ") |
| endif() |
| |
| file(WRITE "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake" |
| "${LZMA_CONFIG_CONTENTS}") |
| |
| # Set CMAKE_INSTALL_LIBDIR and friends. |
| include(GNUInstallDirs) |
| |
| # Create liblzma.pc. |
| set(prefix "${CMAKE_INSTALL_PREFIX}") |
| set(exec_prefix "${CMAKE_INSTALL_PREFIX}") |
| set(libdir "${CMAKE_INSTALL_FULL_LIBDIR}") |
| set(includedir "${CMAKE_INSTALL_FULL_INCLUDEDIR}") |
| set(PTHREAD_CFLAGS "${CMAKE_THREAD_LIBS_INIT}") |
| configure_file(src/liblzma/liblzma.pc.in liblzma.pc |
| @ONLY |
| NEWLINE_STYLE LF) |
| |
| # Install the library binary. The INCLUDES specifies the include path that |
| # is exported for other projects to use but it doesn't install any files. |
| install(TARGETS liblzma EXPORT liblzmaTargets |
| RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT liblzma_Runtime |
| LIBRARY DESTINATION "${CMAKE_INSTALL_LIBDIR}" |
| COMPONENT liblzma_Runtime |
| NAMELINK_COMPONENT liblzma_Development |
| ARCHIVE DESTINATION "${CMAKE_INSTALL_LIBDIR}" |
| COMPONENT liblzma_Development |
| INCLUDES DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}") |
| |
| # Install the liblzma API headers. These use a subdirectory so |
| # this has to be done as a separate step. |
| install(DIRECTORY src/liblzma/api/ |
| COMPONENT liblzma_Development |
| DESTINATION "${CMAKE_INSTALL_INCLUDEDIR}" |
| FILES_MATCHING PATTERN "*.h") |
| |
| # Install the CMake files that other packages can use to find liblzma. |
| set(liblzma_INSTALL_CMAKEDIR |
| "${CMAKE_INSTALL_LIBDIR}/cmake/liblzma" |
| CACHE STRING "Path to liblzma's .cmake files") |
| |
| install(EXPORT liblzmaTargets |
| NAMESPACE liblzma:: |
| FILE liblzma-targets.cmake |
| DESTINATION "${liblzma_INSTALL_CMAKEDIR}" |
| COMPONENT liblzma_Development) |
| |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config.cmake" |
| "${CMAKE_CURRENT_BINARY_DIR}/liblzma-config-version.cmake" |
| DESTINATION "${liblzma_INSTALL_CMAKEDIR}" |
| COMPONENT liblzma_Development) |
| |
| if(NOT MSVC) |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/liblzma.pc" |
| DESTINATION "${CMAKE_INSTALL_LIBDIR}/pkgconfig" |
| COMPONENT liblzma_Development) |
| endif() |
| |
| |
| ############################################################################# |
| # getopt_long |
| ############################################################################# |
| |
| # The command line tools needs this. |
| check_symbol_exists(getopt_long getopt.h HAVE_GETOPT_LONG) |
| |
| |
| ############################################################################# |
| # xzdec |
| ############################################################################# |
| |
| if(HAVE_GETOPT_LONG AND HAVE_DECODERS) |
| add_executable(xzdec |
| src/common/sysdefs.h |
| src/common/tuklib_common.h |
| src/common/tuklib_config.h |
| src/common/tuklib_exit.c |
| src/common/tuklib_exit.h |
| src/common/tuklib_gettext.h |
| src/common/tuklib_progname.c |
| src/common/tuklib_progname.h |
| src/xzdec/xzdec.c |
| ) |
| |
| target_include_directories(xzdec PRIVATE |
| src/common |
| src/liblzma/api |
| ) |
| |
| target_link_libraries(xzdec PRIVATE liblzma) |
| |
| if(WIN32) |
| # Add the Windows resource file for xzdec.exe. |
| target_sources(xzdec PRIVATE src/xzdec/xzdec_w32res.rc) |
| set_target_properties(xzdec PROPERTIES |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc" |
| ) |
| endif() |
| |
| tuklib_progname(xzdec) |
| |
| install(TARGETS xzdec |
| RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT xzdec) |
| |
| if(UNIX) |
| install(FILES src/xzdec/xzdec.1 |
| DESTINATION "${CMAKE_INSTALL_MANDIR}/man1" |
| COMPONENT xzdec) |
| endif() |
| endif() |
| |
| |
| ############################################################################# |
| # xz |
| ############################################################################# |
| |
| if(NOT MSVC AND HAVE_GETOPT_LONG) |
| add_executable(xz |
| src/common/mythread.h |
| src/common/sysdefs.h |
| src/common/tuklib_common.h |
| src/common/tuklib_config.h |
| src/common/tuklib_exit.c |
| src/common/tuklib_exit.h |
| src/common/tuklib_gettext.h |
| src/common/tuklib_integer.h |
| src/common/tuklib_mbstr.h |
| src/common/tuklib_mbstr_fw.c |
| src/common/tuklib_mbstr_width.c |
| src/common/tuklib_open_stdxxx.c |
| src/common/tuklib_open_stdxxx.h |
| src/common/tuklib_progname.c |
| src/common/tuklib_progname.h |
| src/xz/args.c |
| src/xz/args.h |
| src/xz/coder.c |
| src/xz/coder.h |
| src/xz/file_io.c |
| src/xz/file_io.h |
| src/xz/hardware.c |
| src/xz/hardware.h |
| src/xz/main.c |
| src/xz/main.h |
| src/xz/message.c |
| src/xz/message.h |
| src/xz/mytime.c |
| src/xz/mytime.h |
| src/xz/options.c |
| src/xz/options.h |
| src/xz/private.h |
| src/xz/signals.c |
| src/xz/signals.h |
| src/xz/suffix.c |
| src/xz/suffix.h |
| src/xz/util.c |
| src/xz/util.h |
| ) |
| |
| target_include_directories(xz PRIVATE |
| src/common |
| src/liblzma/api |
| ) |
| |
| if(HAVE_DECODERS) |
| target_sources(xz PRIVATE |
| src/xz/list.c |
| src/xz/list.h |
| ) |
| endif() |
| |
| target_link_libraries(xz PRIVATE liblzma) |
| |
| target_compile_definitions(xz PRIVATE ASSUME_RAM=128) |
| |
| if(WIN32) |
| # Add the Windows resource file for xz.exe. |
| target_sources(xz PRIVATE src/xz/xz_w32res.rc) |
| set_target_properties(xz PROPERTIES |
| LINK_DEPENDS "${CMAKE_CURRENT_SOURCE_DIR}/src/common/common_w32res.rc" |
| ) |
| endif() |
| |
| tuklib_progname(xz) |
| tuklib_mbstr(xz) |
| |
| check_symbol_exists(optreset getopt.h HAVE_OPTRESET) |
| tuklib_add_definition_if(xz HAVE_OPTRESET) |
| |
| check_symbol_exists(posix_fadvise fcntl.h HAVE_POSIX_FADVISE) |
| tuklib_add_definition_if(xz HAVE_POSIX_FADVISE) |
| |
| # How to get file time: |
| check_struct_has_member("struct stat" st_atim.tv_nsec |
| "sys/types.h;sys/stat.h" |
| HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) |
| if(HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) |
| tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIM_TV_NSEC) |
| else() |
| check_struct_has_member("struct stat" st_atimespec.tv_nsec |
| "sys/types.h;sys/stat.h" |
| HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) |
| if(HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) |
| tuklib_add_definitions(xz HAVE_STRUCT_STAT_ST_ATIMESPEC_TV_NSEC) |
| else() |
| check_struct_has_member("struct stat" st_atimensec |
| "sys/types.h;sys/stat.h" |
| HAVE_STRUCT_STAT_ST_ATIMENSEC) |
| tuklib_add_definition_if(xz HAVE_STRUCT_STAT_ST_ATIMENSEC) |
| endif() |
| endif() |
| |
| # How to set file time: |
| check_symbol_exists(futimens "sys/types.h;sys/stat.h" HAVE_FUTIMENS) |
| if(HAVE_FUTIMENS) |
| tuklib_add_definitions(xz HAVE_FUTIMENS) |
| else() |
| check_symbol_exists(futimes "sys/time.h" HAVE_FUTIMES) |
| if(HAVE_FUTIMES) |
| tuklib_add_definitions(xz HAVE_FUTIMES) |
| else() |
| check_symbol_exists(futimesat "sys/time.h" HAVE_FUTIMESAT) |
| if(HAVE_FUTIMESAT) |
| tuklib_add_definitions(xz HAVE_FUTIMESAT) |
| else() |
| check_symbol_exists(utimes "sys/time.h" HAVE_UTIMES) |
| if(HAVE_UTIMES) |
| tuklib_add_definitions(xz HAVE_UTIMES) |
| else() |
| check_symbol_exists(_futime "sys/utime.h" HAVE__FUTIME) |
| if(HAVE__FUTIME) |
| tuklib_add_definitions(xz HAVE__FUTIME) |
| else() |
| check_symbol_exists(utime "utime.h" HAVE_UTIME) |
| tuklib_add_definition_if(xz HAVE_UTIME) |
| endif() |
| endif() |
| endif() |
| endif() |
| endif() |
| |
| install(TARGETS xz |
| RUNTIME DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT xz) |
| |
| if(UNIX) |
| install(FILES src/xz/xz.1 |
| DESTINATION "${CMAKE_INSTALL_MANDIR}/man1" |
| COMPONENT xz) |
| |
| option(CREATE_XZ_SYMLINKS "Create unxz and xzcat symlinks" ON) |
| option(CREATE_LZMA_SYMLINKS "Create lzma, unlzma, and lzcat symlinks" |
| ON) |
| set(XZ_LINKS) |
| |
| if(CREATE_XZ_SYMLINKS) |
| list(APPEND XZ_LINKS "unxz" "xzcat") |
| endif() |
| |
| if(CREATE_LZMA_SYMLINKS) |
| list(APPEND XZ_LINKS "lzma" "unlzma" "lzcat") |
| endif() |
| |
| # With Windows Cygwin and MSYS2 the symlinking is complicated. Both |
| # of these environments set the UNIX variable so they will try to |
| # make the symlinks. The ability for Cygwin and MSYS2 to make |
| # broken symlinks is determined by the CYGWIN and MSYS2 environment |
| # variables, respectively. Broken symlinks are needed for the man |
| # page symlinks and for determining if the xz and lzma symlinks need |
| # to depend on the xz target or not. If broken symlinks cannot be |
| # made then the xz binary must be created before the symlinks. |
| set(ALLOW_BROKEN_SYMLINKS ON) |
| |
| if(CMAKE_SYSTEM_NAME STREQUAL "CYGWIN") |
| # The Cygwin env variable can be set to four possible values: |
| # |
| # 1. "lnk". Create symlinks as Windows shortcuts. |
| # |
| # 2. "native". Create symlinks as native Windows symlinks |
| # if supported by the system. Fallback to "lnk" if native |
| # symlinks are not supported. |
| # |
| # 3. "nativestrict". Create symlinks as native Windows symlinks |
| # if supported by the system. If the target of the symlink |
| # does not exist or the creation of the symlink fails for any |
| # reason, do not create the symlink. |
| # |
| # 4. "sys". Create symlinks as plain files with a special |
| # system attribute containing the path to the symlink target. |
| # |
| # So, the only case we care about for broken symlinks is |
| # "nativestrict" since all other values mean that broken |
| # symlinks are allowed. If the env variable is not set the |
| # default is "native". If the env variable is set but not |
| # assigned one of the four values, then the default is the same |
| # as option 1 "lnk". |
| string(FIND "$ENV{CYGWIN}" "winsymlinks:nativestrict" SYMLINK_POS) |
| if(SYMLINK_POS GREATER -1) |
| set(ALLOW_BROKEN_SYMLINKS OFF) |
| endif() |
| elseif(CMAKE_SYSTEM_NAME STREQUAL "MSYS") |
| # The MSYS env variable behaves similar to the CYGWIN but has a |
| # different default behavior. If winsymlinks is set but not |
| # assigned one of the four supported values, the default is to |
| # *copy* the target to the symlink destination. This will fail |
| # if the target does not exist so broken symlinks cannot be |
| # allowed. |
| string(FIND "$ENV{MSYS}" "winsymlinks" SYMLINK_POS) |
| if(SYMLINK_POS GREATER -1) |
| string(FIND "$ENV{MSYS}" "winsymlinks:nativestrict" |
| SYMLINK_POS) |
| if(SYMLINK_POS GREATER -1) |
| set(ALLOW_BROKEN_SYMLINKS OFF) |
| endif() |
| else() |
| set(ALLOW_BROKEN_SYMLINKS OFF) |
| endif() |
| endif() |
| |
| # Create symlinks in the build directory and then install them. |
| # |
| # The symlinks do not likely need any special extension since |
| # even on Windows the symlink can still be executed without |
| # the .exe extension. |
| foreach(LINK IN LISTS XZ_LINKS) |
| add_custom_target("create_${LINK}" ALL |
| "${CMAKE_COMMAND}" -E create_symlink |
| "$<TARGET_FILE_NAME:xz>" "${LINK}" |
| BYPRODUCTS "${LINK}" |
| VERBATIM) |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${LINK}" |
| DESTINATION "${CMAKE_INSTALL_BINDIR}" |
| COMPONENT xz) |
| |
| # Only create the man page symlinks if the symlinks can be |
| # created broken. The symlinks will not be valid until install |
| # so they cannot be created on these system environments. |
| if(ALLOW_BROKEN_SYMLINKS) |
| add_custom_target("create_${LINK}.1" ALL |
| "${CMAKE_COMMAND}" -E create_symlink "xz.1" "${LINK}.1" |
| BYPRODUCTS "${LINK}.1" |
| VERBATIM) |
| install(FILES "${CMAKE_CURRENT_BINARY_DIR}/${LINK}.1" |
| DESTINATION "${CMAKE_INSTALL_MANDIR}/man1" |
| COMPONENT xz) |
| else() |
| # Add the xz target as dependency when broken symlinks |
| # cannot be made. This ensures parallel builds do not fail |
| # since it will enforce the order of creating xz first, then |
| # the symlinks. |
| add_dependencies("create_${LINK}" xz) |
| endif() |
| endforeach() |
| endif() |
| endif() |
| |
| |
| ############################################################################# |
| # Tests |
| ############################################################################# |
| |
| include(CTest) |
| |
| if(BUILD_TESTING) |
| set(LIBLZMA_TESTS |
| test_bcj_exact_size |
| test_block_header |
| test_check |
| test_filter_flags |
| test_filter_str |
| test_hardware |
| test_index |
| test_index_hash |
| test_lzip_decoder |
| test_memlimit |
| test_stream_flags |
| test_vli |
| ) |
| |
| foreach(TEST IN LISTS LIBLZMA_TESTS) |
| add_executable("${TEST}" "tests/${TEST}.c") |
| |
| target_include_directories("${TEST}" PRIVATE |
| src/common |
| src/liblzma/api |
| src/liblzma |
| ) |
| |
| target_link_libraries("${TEST}" PRIVATE liblzma) |
| |
| # Put the test programs into their own subdirectory so they don't |
| # pollute the top-level dir which might contain xz and xzdec. |
| set_target_properties("${TEST}" PROPERTIES |
| RUNTIME_OUTPUT_DIRECTORY "${CMAKE_CURRENT_BINARY_DIR}/tests_bin" |
| ) |
| |
| add_test(NAME "${TEST}" |
| COMMAND "${CMAKE_CURRENT_BINARY_DIR}/tests_bin/${TEST}" |
| ) |
| |
| # Set srcdir environment variable so that the tests find their |
| # input files from the source tree. |
| # |
| # Set the return code for skipped tests to match Automake convention. |
| set_tests_properties("${TEST}" PROPERTIES |
| ENVIRONMENT "srcdir=${CMAKE_CURRENT_SOURCE_DIR}/tests" |
| SKIP_RETURN_CODE 77 |
| ) |
| endforeach() |
| endif() |