| |
| XZ Utils |
| ======== |
| |
| 0. Overview |
| 1. Documentation |
| 1.1. Overall documentation |
| 1.2. Documentation for command-line tools |
| 1.3. Documentation for liblzma |
| 2. Version numbering |
| 3. Reporting bugs |
| 4. Translations |
| 5. Other implementations of the .xz format |
| 6. Contact information |
| |
| |
| 0. Overview |
| ----------- |
| |
| XZ Utils provide a general-purpose data-compression library plus |
| command-line tools. The native file format is the .xz format, but |
| also the legacy .lzma format is supported. The .xz format supports |
| multiple compression algorithms, which are called "filters" in the |
| context of XZ Utils. The primary filter is currently LZMA2. With |
| typical files, XZ Utils create about 30 % smaller files than gzip. |
| |
| To ease adapting support for the .xz format into existing applications |
| and scripts, the API of liblzma is somewhat similar to the API of the |
| popular zlib library. For the same reason, the command-line tool xz |
| has a command-line syntax similar to that of gzip. |
| |
| When aiming for the highest compression ratio, the LZMA2 encoder uses |
| a lot of CPU time and may use, depending on the settings, even |
| hundreds of megabytes of RAM. However, in fast modes, the LZMA2 encoder |
| competes with bzip2 in compression speed, RAM usage, and compression |
| ratio. |
| |
| LZMA2 is reasonably fast to decompress. It is a little slower than |
| gzip, but a lot faster than bzip2. Being fast to decompress means |
| that the .xz format is especially nice when the same file will be |
| decompressed very many times (usually on different computers), which |
| is the case e.g. when distributing software packages. In such |
| situations, it's not too bad if the compression takes some time, |
| since that needs to be done only once to benefit many people. |
| |
| With some file types, combining (or "chaining") LZMA2 with an |
| additional filter can improve the compression ratio. A filter chain may |
| contain up to four filters, although usually only one or two are used. |
| For example, putting a BCJ (Branch/Call/Jump) filter before LZMA2 |
| in the filter chain can improve compression ratio of executable files. |
| |
| Since the .xz format allows adding new filter IDs, it is possible that |
| some day there will be a filter that is, for example, much faster to |
| compress than LZMA2 (but probably with worse compression ratio). |
| Similarly, it is possible that some day there is a filter that will |
| compress better than LZMA2. |
| |
| XZ Utils supports multithreaded compression. XZ Utils doesn't support |
| multithreaded decompression yet. It has been planned though and taken |
| into account when designing the .xz file format. In the future, files |
| that were created in threaded mode can be decompressed in threaded |
| mode too. |
| |
| |
| 1. Documentation |
| ---------------- |
| |
| 1.1. Overall documentation |
| |
| README This file |
| |
| INSTALL.generic Generic install instructions for those not familiar |
| with packages using GNU Autotools |
| INSTALL Installation instructions specific to XZ Utils |
| PACKAGERS Information to packagers of XZ Utils |
| |
| COPYING XZ Utils copyright and license information |
| COPYING.GPLv2 GNU General Public License version 2 |
| COPYING.GPLv3 GNU General Public License version 3 |
| COPYING.LGPLv2.1 GNU Lesser General Public License version 2.1 |
| |
| AUTHORS The main authors of XZ Utils |
| THANKS Incomplete list of people who have helped making |
| this software |
| NEWS User-visible changes between XZ Utils releases |
| ChangeLog Detailed list of changes (commit log) |
| TODO Known bugs and some sort of to-do list |
| |
| Note that only some of the above files are included in binary |
| packages. |
| |
| |
| 1.2. Documentation for command-line tools |
| |
| The command-line tools are documented as man pages. In source code |
| releases (and possibly also in some binary packages), the man pages |
| are also provided in plain text (ASCII only) and PDF formats in the |
| directory "doc/man" to make the man pages more accessible to those |
| whose operating system doesn't provide an easy way to view man pages. |
| |
| |
| 1.3. Documentation for liblzma |
| |
| The liblzma API headers include short docs about each function |
| and data type as Doxygen tags. These docs should be quite OK as |
| a quick reference. |
| |
| There are a few example/tutorial programs that should help in |
| getting started with liblzma. In the source package the examples |
| are in "doc/examples" and in binary packages they may be under |
| "examples" in the same directory as this README. |
| |
| Since the liblzma API has similarities to the zlib API, some people |
| may find it useful to read the zlib docs and tutorial too: |
| |
| http://zlib.net/manual.html |
| http://zlib.net/zlib_how.html |
| |
| |
| 2. Version numbering |
| -------------------- |
| |
| The version number format of XZ Utils is X.Y.ZS: |
| |
| - X is the major version. When this is incremented, the library |
| API and ABI break. |
| |
| - Y is the minor version. It is incremented when new features |
| are added without breaking the existing API or ABI. An even Y |
| indicates a stable release and an odd Y indicates unstable |
| (alpha or beta version). |
| |
| - Z is the revision. This has a different meaning for stable and |
| unstable releases: |
| |
| * Stable: Z is incremented when bugs get fixed without adding |
| any new features. This is intended to be convenient for |
| downstream distributors that want bug fixes but don't want |
| any new features to minimize the risk of introducing new bugs. |
| |
| * Unstable: Z is just a counter. API or ABI of features added |
| in earlier unstable releases having the same X.Y may break. |
| |
| - S indicates stability of the release. It is missing from the |
| stable releases, where Y is an even number. When Y is odd, S |
| is either "alpha" or "beta" to make it very clear that such |
| versions are not stable releases. The same X.Y.Z combination is |
| not used for more than one stability level, i.e. after X.Y.Zalpha, |
| the next version can be X.Y.(Z+1)beta but not X.Y.Zbeta. |
| |
| |
| 3. Reporting bugs |
| ----------------- |
| |
| Naturally it is easiest for me if you already know what causes the |
| unexpected behavior. Even better if you have a patch to propose. |
| However, quite often the reason for unexpected behavior is unknown, |
| so here are a few things to do before sending a bug report: |
| |
| 1. Try to create a small example how to reproduce the issue. |
| |
| 2. Compile XZ Utils with debugging code using configure switches |
| --enable-debug and, if possible, --disable-shared. If you are |
| using GCC, use CFLAGS='-O0 -ggdb3'. Don't strip the resulting |
| binaries. |
| |
| 3. Turn on core dumps. The exact command depends on your shell; |
| for example in GNU bash it is done with "ulimit -c unlimited", |
| and in tcsh with "limit coredumpsize unlimited". |
| |
| 4. Try to reproduce the suspected bug. If you get "assertion failed" |
| message, be sure to include the complete message in your bug |
| report. If the application leaves a coredump, get a backtrace |
| using gdb: |
| $ gdb /path/to/app-binary # Load the app to the debugger. |
| (gdb) core core # Open the coredump. |
| (gdb) bt # Print the backtrace. Copy & paste to bug report. |
| (gdb) quit # Quit gdb. |
| |
| Report your bug via email or IRC (see Contact information below). |
| Don't send core dump files or any executables. If you have a small |
| example file(s) (total size less than 256 KiB), please include |
| it/them as an attachment. If you have bigger test files, put them |
| online somewhere and include a URL to the file(s) in the bug report. |
| |
| Always include the exact version number of XZ Utils in the bug report. |
| If you are using a snapshot from the git repository, use "git describe" |
| to get the exact snapshot version. If you are using XZ Utils shipped |
| in an operating system distribution, mention the distribution name, |
| distribution version, and exact xz package version; if you cannot |
| repeat the bug with the code compiled from unpatched source code, |
| you probably need to report a bug to your distribution's bug tracking |
| system. |
| |
| |
| 4. Translations |
| --------------- |
| |
| The xz command line tool and all man pages can be translated. |
| The translations are handled via the Translation Project. If you |
| wish to help translating xz, please join the Translation Project: |
| |
| https://translationproject.org/html/translators.html |
| |
| Several strings will change in a future version of xz so if you |
| wish to start a new translation, look at the code in the xz git |
| repostiory instead of a 5.2.x release. |
| |
| |
| 5. Other implementations of the .xz format |
| ------------------------------------------ |
| |
| 7-Zip and the p7zip port of 7-Zip support the .xz format starting |
| from the version 9.00alpha. |
| |
| http://7-zip.org/ |
| http://p7zip.sourceforge.net/ |
| |
| XZ Embedded is a limited implementation written for use in the Linux |
| kernel, but it is also suitable for other embedded use. |
| |
| https://tukaani.org/xz/embedded.html |
| |
| |
| 6. Contact information |
| ---------------------- |
| |
| If you have questions, bug reports, patches etc. related to XZ Utils, |
| contact Lasse Collin <lasse.collin@tukaani.org> (in Finnish or English). |
| I'm sometimes slow at replying. If you haven't got a reply within two |
| weeks, assume that your email has got lost and resend it or use IRC. |
| |
| You can find me also from #tukaani on Freenode; my nick is Larhzu. |
| The channel tends to be pretty quiet, so just ask your question and |
| someone may wake up. |
| |
