| xz-utils (5.1.2alpha-exp0.1) experimental; urgency=low |
| |
| * Multithreaded compression support. |
| "xz --threads" and the lzma_stream_encoder_mt() function use |
| multiple threads to compress. This is an experimental feature |
| and the interface is subject to change. |
| * xz-utils: Update package description to reflect threading |
| support. |
| * debian/symbols: XZ_5.1.2alpha symbols require the experimental |
| version of liblzma. Interfaces and functionality may change |
| from snapshot to snapshot. |
| * xz: Re-enable the --block-list option. |
| * debian/rules: Replace output of gcc command lines with briefer, |
| kbuild-style "CC target.lo" context lines when DEB_BUILD_OPTIONS |
| contains "quiet". |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Mon, 28 May 2012 20:46:41 -0500 |
| |
| xz-utils (5.1.2alpha-0.1) experimental; urgency=low |
| |
| * New upstream alpha release. |
| * Remove support for the new --block-list option to give the |
| interface time to evolve. |
| * debian/rules clean: Remove more files not included in the |
| release tarball. |
| * Lower priority of xz-utils to standard. Closes: #685203. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Wed, 04 Jul 2012 16:18:33 -0500 |
| |
| xz-utils (5.1.1alpha+20120614-2) unstable; urgency=low |
| |
| * Apply fixes from 5.1.2alpha. Closes: #685220. |
| - liblzma: report a LZMA_DATA_ERROR when range encoded data starts |
| with a nonzero byte. This is a sanity check to catch malformed |
| files that no known encoders produce. |
| - xz -v -v --list: Support for decompressing blocks with |
| zero-length uncompressed data was added in xz 5.0.2, not 5.0.3. |
| - xz.1: "xz --robot -v -v --list" gained a "minimum xz version to |
| decompress" field. |
| * xz-utils/README.Debian: Document differences from upstream. |
| Closes: #685217. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Mon, 10 Sep 2012 14:35:33 -0700 |
| |
| xz-utils (5.1.1alpha+20120614-1) unstable; urgency=low |
| |
| * New snapshot, taken from upstream commit f1675f76. |
| - liblzma: BCJ filters would return a spurious LZMA_BUF_ERROR |
| result in certain circumstances. As a result, the xz tool |
| could produce inappropriate "Compressed data is corrupt" or |
| "Unexpected end of input" failures (reported in XZ Embedded as |
| Fedora bug 735408). |
| - "xz -v -v --list" prints the minimal XZ Utils version needed |
| to decompress a stream. |
| - "xz --robot -v --list" formats filenames more plainly. |
| - xzgrep does not fail unconditionally when the decompressor |
| dies with SIGPIPE due to unconsumed output any more. This |
| makes the exit status from commands such as "xzgrep -q" and |
| "xzgrep -l" more predictable and convenient for scripts. |
| - examples/xz_pipe_decomp.c did not check correctly for |
| truncated input. |
| - There is a new set of sample programs. The old ones have |
| been renamed to examples_old but are still maintained. |
| * liblzma: |
| - If dlopen() indicates that liblzma.so.2 is loaded, check fewer |
| reserved fields in the stream argument to the lzma_code() |
| function. This prevents out-of-bounds reads when liblzma5 |
| functions are called by code built against liblzma2 (see |
| <http://sourceware.org/PR12977>). |
| - Remove the lzma_code@Base compatibility symbol. |
| Closes: #649522. Thanks to Eduard Bloch. |
| - Install run-time library to /lib so it can be used before /usr |
| is mounted. Closes: #672120. |
| - Configure with --disable-threads for now to avoid needlessly |
| linking to libpthread and librt. |
| * liblzma-dev: |
| - Install an appropriate library for static linking instead of |
| the decompression-only version used to build xzdec. |
| Closes: #673001. Thanks to Anton Tolchanov. |
| - Use the liblzma2-compatible version of lzma_code() in the |
| static library. |
| - Multi-Arch: same. Thanks to Riku Voipio. |
| - Install new examples and revised old examples to |
| /usr/share/doc/liblzma-dev. |
| * xz-utils: |
| - Use update-alternatives to provide lzma, unlzma, lzcat, and |
| the rest of the lz* scripts without conflicting with the lzma |
| package. |
| - Conflicts: lzma versions before before 9.22-1, when it started |
| providing lzma, unlzma, and lzcat through the alternatives |
| system. |
| - Conflicts: and Replaces: xz-lzma. |
| - README.Debian: Update instructions on configuring the package |
| to provide lzma compatibility commands. |
| * Remove xz-lzma package. |
| * Use dpkg-buildflags to retrieve compiler flags, including |
| hardening options. Build-Depends: dpkg-dev (>= 1.16.1). |
| Closes: #653739. |
| * debian/rules: |
| - build-arch: Simplify by using a double-colon rule instead of a |
| dependency on a dummy noop target. |
| - build-indep: Assume doxygen is available, instead of trying to |
| get by by assuming the caller meant to invoke build-arch when |
| it is missing. Build-Depends: dpkg-dev (>= 1.16.2). |
| - Rearrange for clarity. |
| * debian/symbols: Bump the minimal version for lzma_code(), |
| lzma_raw_buffer_decode(), and lzma_raw_buffer_encode(). |
| * Use machine-readable copyright-format 1.0. |
| * Update copyright file. |
| * Standards-Version: 3.9.3 (checked). |
| * debian/changelog.upstream.sh: Use ‘git rev-list | git diff-tree’ |
| instead of ‘git log’ to avoid depending on the build system’s |
| configuration. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Sat, 16 Jun 2012 15:03:17 -0500 |
| |
| xz-utils (5.1.1alpha+20110809-3) unstable; urgency=low |
| |
| * liblzma: Match upstream ABI. |
| - Remove the lzma_chunk_size() function. |
| - A few ABI tweaks to reserved space in structures. |
| - Enable ELF symbol versioning. |
| - Bump soname to 5. |
| - Continue to leave out threading support, since the relevant |
| interfaces in liblzma are not yet stable. |
| * xz-utils/README.Debian: Remove note on ABI differences. |
| * Remove liblzma/README.Debian. |
| * liblzma: Introduce a lzma_code@Base compatibility symbol to ensure |
| programs linked against unversioned symbols from liblzma2 can |
| share a process image with liblzma5 without breaking. |
| * debian/symbols: XZ_5.0 symbols come from liblzma5. Build-Depends: |
| dpkg-dev (>= 1.15.6); thanks to Jakub Wilk for a reminder. |
| * debian/symbols: The lzma_code@Base symbol is not guaranteed to |
| continue to exist in the future, so tell dpkg-shlibdeps to produce |
| an error if some package manages to use it. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Thu, 20 Oct 2011 21:31:31 -0500 |
| |
| xz-utils (5.1.1alpha+20110809-2) unstable; urgency=low |
| |
| * debian/rules build-arch: Do not trigger an infinite "make" |
| recursion loop when DEB_BUILD_OPTIONS=nocheck. Closes: #638071. |
| Thanks to Thorsten Glaser. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 16 Aug 2011 18:11:47 -0500 |
| |
| xz-utils (5.1.1alpha+20110809-1) unstable; urgency=low |
| |
| * New snapshot, taken from upstream commit 5c5b225. |
| - liblzma: |
| - lzma_stream_encoder() leaked memory. |
| - The LZMA2 decoder rejected streams that decompress to a |
| zero-length string. |
| - lzma_easy_buffer_encode() and lzma_stream_buffer_encode() |
| used to write such streams when asked to compress a 0-length |
| buffer. |
| - lzma_index_init() would segfault on allocation failure. |
| - liblzma: Various functions check their arguments (especially |
| choice of integrity check) better, making it harder to create |
| a corrupt .xz file instead of receiving an error. |
| - xz and scripts: |
| - "xz -v -v --list" would read and try to free() uninitialized |
| memory, continuing past the end of an on-stack array, when |
| asked to describe certain corrupted XZ files. |
| - xz -S.suf now refuses to compress a file whose name already |
| ends with the suffix “.suf”. |
| - xz --force can be used to compress setuid, setgid, sticky, |
| and multiply linked files. |
| - xz uses posix_fadvise() to speed up sequential input. |
| - xz --block-size forces a full flush periodically during |
| compression, for better random-access reading support and to |
| make simple parallelism possible in the future. |
| - unxz: The new --single-stream option discards trailing |
| garbage after the end of the first stream. |
| - xzdiff can read gzip- and bzip2-compressed files. |
| - xzdiff and xzgrep can read lzop-compressed files. |
| - xzegrep and xzfgrep perform extended regex and fixed-string |
| matches, respectively. (The previous behavior was to always |
| use basic regexes.) |
| - xzgrep -l (= --files-with-match) works. |
| - The Czech “xz --help” output uses a more correct term for |
| files with holes. Thanks to Petr Hubený. Closes: #605762. |
| - xz: New Polish and French translations. |
| - The Doxygen-generated documentation uses short, relative paths |
| to name source files. Closes: #572273. |
| * Update copyright file. |
| * Remove example programs from debian/examples. They are included |
| in the upstream source package now. |
| * Move liblzma to an architecture-specific directory, so the |
| native library and foreign-architecture versions can be installed |
| simultaneously. |
| - liblzma2: Pre-Depends: multiarch-support. |
| - Use debhelper compatibility level 9. This requires passing |
| the dh sequence name before other options when invoking dh in |
| debian/rules. Build-Depends: debhelper (>= 8.1.3). |
| - liblzma2, liblzma-dev: Install files under /usr/lib/<triplet> |
| instead of /usr/lib. |
| - Thanks to Steve Langasek for explaining the process on the |
| Debian wiki. |
| * Standards-Version: 3.9.2 (checked). |
| * debian/control: liblzma2 is Multi-Arch: same, while xz-utils |
| and xzdec are Multi-Arch: foreign. Closes: #637883. Thanks to |
| Riku Voipio. |
| * debian/symbols: Bump the minimal version for LZMA2 encoder |
| functions that reject more bad arguments and skip empty blocks. |
| * debian/rules: ./configure --disable-symbol-versions for now. |
| * debian/rules: Provide build-arch and build-indep targets that |
| only build the code and the API documentation, respectively. |
| Thanks to Roger Leigh for suggesting it through lintian. |
| Build-Depends: debhelper (>= 8.9.0). |
| * debian/rules: Treat DEB_BUILD_OPTIONS=nocheck as a request not to |
| run build-time tests. Thanks to Thorsten Glaser for a reminder. |
| Closes: #627209. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 16 Aug 2011 00:40:31 -0500 |
| |
| xz-utils (5.0.0-2) unstable; urgency=low |
| |
| * Upload to unstable. |
| * liblzma2, liblzma-dev, xz-lzma: Install release notes. |
| * debian/symbols: Bump the minimal versions for lzma_index_encoder, |
| lzma_index_decoder to the version in which they gained LZMA_FINISH |
| support. |
| * xz-utils/README.Debian: Document differences from upstream ABI. |
| * debian/changelog.upstream.sh: Avoid empty changelog entries when |
| multiple Debian revisions match an upstream tag. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Thu, 11 Nov 2010 13:45:20 -0600 |
| |
| xz-utils (5.0.0-1) experimental; urgency=low |
| |
| * Upload to experimental. |
| * New stable upstream release. Closes: #592298. |
| - xz avoids SA_RESTART. This should not have a visible effect |
| because xz already blocked signals during operations that |
| would be difficult to resume after interruption. |
| - liblzma: The coders returned by lzma_index_encoder() and |
| lzma_index_decoder() support an LZMA_FINISH action, with |
| identical semantics to LZMA_RUN. |
| - The printable (PDF and PS) versions of the manual are easier |
| to read. |
| - Many documentation and build system cleanups. |
| * liblzma: Back out upstream ABI tweaks. |
| * liblzma/README.Debian: Document ABI differences from upstream. |
| * Copy sample code not included in the release tarball from |
| the development upstream repository to debian/examples. |
| * debian/rules clean: Remove some files not included in the |
| release tarball. |
| * copyright: List new INSTALL.generic license. |
| * debian/rules clean: Take new build-aux scripts into account. |
| * debian/rules: Adapt for upstream build system changes. |
| Closes: #540443. |
| * xz-utils, xzdec: Install release notes. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Mon, 25 Oct 2010 05:45:18 -0500 |
| |
| xz-utils (4.999.9beta+20100927-1) experimental; urgency=low |
| |
| * New snapshot, taken from upstream commit cec0ddc. |
| - liblzma: The meaning of --extreme has been tweaked to address |
| cases in which it made the compression ratio worse. Some files |
| might benefit slightly less from --extreme. |
| - xz: Table columns are not misaligned any more in messages with |
| multi-byte characters (e.g., file sizes with LANG=fi_FI.UTF-8). |
| - xz: New German and Italian translations. |
| - Various documentation, message, and translation updates. |
| * Update copyright file. |
| * debian/rules get-orig-source: Update upstream Git URL. |
| * xz-utils/README.Debian: Advertise XZ_DEFAULTS. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Mon, 27 Sep 2010 16:22:22 -0500 |
| |
| xz-utils (4.999.9beta+20100903-1) experimental; urgency=low |
| |
| * New snapshot, taken from upstream commit 373ee26. |
| - liblzma: The settings for compression levels 0 through 5 |
| (used by xz -0/.../-5) have been tweaked. This affects the |
| speed, compression ratio, and memory usage at compression and |
| decompression time. |
| - Does not search so hard for a match when a low "nice match |
| length" setting is specified without a depth. |
| - xz: The -1/.../-9 preset options override any previously |
| specified filters, rather than vice versa. To mix presets |
| with filter options, use the --lzma2=preset=n option. |
| - xz: Warns about --memlimit-compress settings that result in |
| compression settings changing even if no explicit -1/.../-9, |
| --lzma1, or --lzma2 option was used. |
| - "xz -v -v --compress" now prints an estimate of the memory |
| required to decompress a file. |
| * debian/copyright: Update upstream Git URL. |
| * debian/changelog.upstream.sh: Permit terser changelog lines. |
| * Standards-Version: 3.9.1 (checked). |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Fri, 03 Sep 2010 17:05:20 -0500 |
| |
| xz-utils (4.999.9beta+20100810-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit d5653ba8a. |
| - xz: The memory usage limiter is now disabled by default. |
| - xz: Support for an XZ_DEFAULTS environment variable was added. |
| It contains user-specific default settings, such as memory usage |
| limits, and can be overridden by the command line and XZ_OPT. |
| - xz: The new --memlimit-compress and --memlimit-decompress |
| options allow the memory usage limit to be set separately for |
| compression and decompression. A new --memlimit alias has been |
| added for the existing --memory option. |
| - xz: The --info-memory option (with or without --robot) now prints |
| how much RAM is installed in addition to the compression and |
| decompression memory limits. |
| * liblzma-doc: Simplify package description. |
| * debian/control: Build-Depends: autopoint | gettext (<< 0.18-1), |
| autopoint | cvs instead of autopoint, to help with backporting. |
| Thanks to Thorsten Glaser for a report. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 10 Aug 2010 20:27:14 -0500 |
| |
| xz-utils (4.999.9beta+20100713-1) unstable; urgency=low |
| |
| [ Thorsten Glaser ] |
| * Explicitly depend on autoconf (>= 2.64~) due to AC_PREREQ, |
| discovered during backporting. |
| |
| [ Jonathan Nieder ] |
| * Upload to unstable. |
| * New upstream snapshot, taken from upstream commit a540198f. |
| - xz: The new --no-adjust option can be used to error out if there |
| is insufficient memory for the chosen compression level. |
| * liblzma-dev: Install examples to /usr/share/doc/liblzma-dev. |
| * Update copyright file. |
| |
| * Drop unpack-time conflicts in favor of configuration-time |
| conflicts (Replaces + Breaks): |
| - xz-utils: against old xz-lzma (for lzmainfo). |
| - xzdec: against old xz-lzma (for lzmadec). |
| - xz-lzma: against lzip 1.7 (for lzdiff and lzgrep). |
| * Standards-Version: 3.9.0. |
| |
| * debian/autogen.sh: Don’t regenerate upstream changelog when it is |
| not out of date. |
| * debian/rules get-orig-source: Use gzip --no-name --rsyncable. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Thu, 15 Jul 2010 01:53:37 -0500 |
| |
| xz-utils (4.999.9beta+20100602-1) experimental; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit d8b41eed. |
| - The output from "xz -v --list" and "xz -v -v --list" has been |
| improved. |
| "xz -v -v --list" can be used to obtain an estimate for the memory |
| required to decompress a file. |
| - The xz manual page has some new material, including examples. |
| Closes: #578465. |
| - liblzma: The lzma_block_compressed_size() function no longer |
| returns LZMA_DATA_ERROR for valid Blocks. |
| * debian/symbols: Bump minimal version for lzma_block_compressed_size. |
| * Correct the 4.999.9beta+20100307-1 changelog entry to describe |
| which public functions were affected. |
| |
| * Add new xz-lzma package to allow xz to provide lzma and related |
| commands. Conflicts: and Provides: lzma. |
| * xz-utils: Suggests: xz-lzma. |
| * xz-utils/README.Debian: Take xz-lzma into account. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Fri, 04 Jun 2010 15:53:58 -0500 |
| |
| xz-utils (4.999.9beta+20100527-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit a334348dc. |
| - Show both elapsed time and estimated remaining time in xz -v. |
| Thanks to Trent W. Buck for the idea. Closes: #574583. |
| - liblzma: Remove the Subblock filter from the public API |
| (the ABI is unchanged). |
| * liblzma-dev.NEWS: Update. |
| * xz-utils: Update Czech translation. |
| * Change priority of xz-utils and liblzma2 to required and |
| xzdec to extra. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Thu, 27 May 2010 16:27:04 -0500 |
| |
| xz-utils (4.999.9beta+20100307-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit f4b2b526. |
| - liblzma: The stream initialization functions were not correctly |
| initializing the internal allow_buffer_error flag. As a result, |
| ever since 4.999.9beta-1 in rare circumstances when decompressing |
| LZMA files, the xz tool would produce spurious "Unexpected end |
| of input" failures (Gentoo bug 305591). |
| - The default memory usage limit on low-memory systems has been |
| increased. |
| * debian/copyright: Clarify. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 09 Mar 2010 10:22:24 -0600 |
| |
| xz-utils (4.999.9beta+20100212-4) unstable; urgency=low |
| |
| * debian/control: Build-Depends: autopoint instead of cvs. |
| Closes: #572481. |
| * debian/copyright: Clean up and include more details. |
| * debian/rules get-orig-source: Unindent comment lines. |
| * xz-utils: include Czech translation. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Thu, 04 Mar 2010 10:17:15 -0600 |
| |
| xz-utils (4.999.9beta+20100212-3) unstable; urgency=low |
| |
| * liblzma-dev: Remove unneeded .la file. |
| * xz-utils: Dynamically link the xz binary. |
| * Do not waste time installing and running doxygen on buildds that |
| are not going to build arch-all packages. |
| Build-Depends-Indep: doxygen. Closes: #540444. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 23 Feb 2010 18:23:29 -0600 |
| |
| xz-utils (4.999.9beta+20100212-2) unstable; urgency=low |
| |
| * Split off xzdec and lzmadec commands into new xzdec package. |
| Thanks to Guillem Jover for the idea. Closes: #571060. |
| * xz-utils.NEWS: advertise this change. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 23 Feb 2010 08:09:39 -0600 |
| |
| xz-utils (4.999.9beta+20100212-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit eb7d51a3f. |
| - xz --force compresses symlinks without complaint now. |
| - liblzma: the optimized CRC32 implementation for x86 no longer |
| misdetects the Hurd as Mac OS X. |
| * debian/rules: ./configure --enable-assembler on the Hurd. |
| * xz-utils: Simplify NEWS.Debian.gz. |
| * liblzma-dev: Add a NEWS file to keep track of future API changes. |
| |
| * Drop unnecessary build-time conflict with autoconf2.13. |
| * Add a blank line to the end of all NEWS files. |
| (Works around: #247356) |
| * debian/README.source: Leave out “-I -i” options. Ignoring version |
| control cruft is the default behavior with dpkg source format 3.0. |
| * debian/changelog.upstream.sh: Pass ‘git log’ an explicit --format |
| option to avoid problems if format.pretty is set in gitconfig. |
| |
| * Correct the 4.999.9beta+20100117-1 changelog entry. It said: |
| + The user-specified memory usage limit was not being honored in |
| some cases. |
| No such bug was observed, so describe the change instead. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Tue, 16 Feb 2010 00:30:24 -0600 |
| |
| xz-utils (4.999.9beta+20100131-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit f9dd797a. |
| + xz: the --list option to display information about a compressed |
| file (e.g., its uncompressed size) is now functional. The output |
| of the xz --robot --list command still may change in future |
| versions. |
| * xz-utils: NEWS.Debian.gz: Clarify how interleaved output can |
| go wrong. |
| * debian/rules: Simplify: |
| - remove support for comma as a delimiter for $(DEB_BUILD_OPTIONS). |
| - rely on dh --parallel instead of tricky logic of our own to |
| handle parallel builds. Build-Depends: debhelper (>= 7.4.10). |
| * Correct some typos in the 4.999.9beta+20100117-1 changelog entry. |
| * Standards-Version: 3.8.4 (checked). |
| * Update copyright file. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Sun, 31 Jan 2010 17:32:02 -0600 |
| |
| xz-utils (4.999.9beta+20100117-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit 07a11dad. |
| + Fix some logic errors in the internal memory usage configuration |
| API. |
| + xz will no longer compress or decompress special files in place, |
| even with --force. |
| --force still enables compression of the target of a symlink. |
| + xz will no longer read compressed data from a terminal or write |
| it to a terminal, even with --force. |
| + liblzma: many Index handling API improvements: |
| - An lzma_index includes more useful metadata that is not |
| actually from the Index. This is particularly helpful for |
| describing multiple-stream files. |
| * lzma_index_cat() does not take a stream padding argument |
| any more; use lzma_index_stream_padding() instead. |
| * lzma_index_memusage() takes two arguments now. |
| The new lzma_index_memused() convenience function |
| calculates the total memory usage of an lzma_index. |
| * lzma_index_count() has been replaced with |
| lzma_index_block_count() and lzma_index_stream_count(). |
| * The new lzma_index_stream_flags() allows storing Stream |
| Flags (e.g., checksum types) with the Index information. |
| * The new lzma_index_checks() function indicates the list of |
| checksum types in use. |
| * lzma_index_equal() has been removed. Its semantics were |
| unclear, and something approximately equivalent can be |
| implemented by iterating over Blocks in application code. |
| - An lzma_index no longer represents a position within an Index. |
| The new lzma_index_iter type can be used for that purpose. |
| * Certain functions generate an iterator on demand now rather |
| than clobbering their lzma_index arguments. Using a single |
| lzma_index for multiple concurrent invocations is safe now: |
| lzma_index_buffer_encode(), lzma_index_encoder() |
| * Functions that used to specify a Record by modifying an |
| lzma_index argument have been renamed and taught to write |
| an lzma_index_iter instead: |
| lzma_index_locate() -> lzma_index_iter_locate() |
| lzma_index_rewind() -> lzma_index_iter_rewind() |
| lzma_index_read() -> lzma_index_iter_next() |
| * The lzma_index_record type used by lzma_index_read() for |
| complex seeks is no more. lzma_index_iter_next() instead |
| takes a parameter of the new lzma_index_iter_mode type. |
| * New function: lzma_index_iter_init() |
| * lzma_index_init() cannot reuse memory from an existing |
| lzma_index any more. The signature changed accordingly. |
| + xz: support for decompressing to a sparse file |
| - Try to write a sparse file if the decompressed stream contains |
| long runs of null bytes. |
| - The new --no-sparse option disables this behavior. |
| + xz: add Czech translation. |
| + liblzma-dev: lzma_filters_copy() and lzma_filters_update() are |
| declared not to throw exceptions. |
| * liblzma: bump soname. |
| * xz-utils: Add NEWS.Debian describing the sparse file support. |
| * debian/rules: Stop explicitly disabling assembler optimizations on |
| the Hurd. The configure script will check if a platform is |
| supported. |
| |
| * debian/rules: Update clean target to handle comments and wildcards |
| in .gitignore. |
| * Build-Depends: perl. |
| |
| * debian/rules: Speed up build by using autoreconf --symlink. |
| * Remove debian/dirs lists. |
| * Update copyright file and fix a small typo. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Mon, 18 Jan 2010 04:19:50 -0600 |
| |
| xz-utils (4.999.9beta+20091116-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit d315ca4. |
| + liblzma: add some new functions: |
| - lzma_filters_copy() to copy a filter chain; |
| - lzma_filters_update() to change compression options mid-stream; |
| - lzma_physmem() to retrieve the total quantity of installed RAM. |
| + Fix a design error in liblzma API. |
| - Stop requiring caller to maintain filter chain during |
| compression. The library used to read it for new compression |
| options. Callers that need to change options mid-stream should |
| use lzma_filters_update() instead. |
| - Remove 'persistent' member from struct lzma_options_lzma. |
| + xz: add --robot --info-memory options, for front-ends to use to |
| read the memory usage limit. |
| * liblzma: bump soname; add README.Debian explaining why soname |
| differs from upstream. |
| * Use source format 3.0 (quilt). |
| * Update and clarify copyright file. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Mon, 16 Nov 2009 16:33:35 -0600 |
| |
| xz-utils (4.999.9beta+20091016-1) unstable; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit 78e92c1. |
| * Drop xzmore.1 patch, applied upstream. |
| * debian/rules: Disable assembler optimizations on hurd. (Closes: #553331) |
| * debian/control: Clarify binary package descriptions. Thanks to |
| Justin B Rye and Ben Finney for the text. |
| * debian/rules get-orig-source: Use commit date (instead of last patch |
| date) to name snapshots. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Sun, 01 Nov 2009 00:22:04 -0500 |
| |
| xz-utils (4.999.9beta+20091004-1) unstable; urgency=low |
| |
| * Upload to unstable. (Closes: #543562) |
| * New upstream snapshot, taken from upstream commit ebfb2c5. |
| * Patch xzmore.1 to use dashes instead of minus signs. |
| * debian/control: Conflicts: xz-lzma. (Closes: #550249) |
| * liblzma-doc: Register Doxygen-generated docs with doc-base. |
| * debian/changelog.upstream.sh: Declare local variables. |
| * debian/changelog.upstream.sh: Cope with multiple Debian revisions per |
| upstream version. |
| * debian/rules: Use ":=" where appropriate. |
| * Add watch file. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Fri, 16 Oct 2009 13:58:54 -0500 |
| |
| xz-utils (4.999.9beta+20091002-1) experimental; urgency=low |
| |
| * New upstream snapshot, taken from upstream commit 29fd321. |
| * debian/control: Build-Depends: cvs (for autopoint). |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Sun, 04 Oct 2009 00:21:08 -0500 |
| |
| xz-utils (4.999.9beta-1) experimental; urgency=low |
| |
| [ Jonathan Nieder ] |
| * New upstream release. |
| - Fix a data corruption in the compression code. (Closes: #544872) |
| - xzdiff: Fix comparing two compressed files. (Closes: #540543) |
| - Most of XZ Utils is now in the public domain. (Closes: #541391) |
| - Add doc/history.txt to the distributed tarball. (Closes: #541540) |
| * Update and clarify copyright file. |
| * Drop lzma compatibility commands for now. (Closes: #542060, #540232) |
| Add instructions to README.Debian for installing them locally. |
| * debian/control: Add information about the packaging Git repository. |
| * debian/control: Clarify package descriptions. |
| * debian/README.source: Clarify build instructions. |
| * Add debian/.gitignore listing build products. |
| * Build xz-utils with static liblzma. |
| - debian/rules: Use configure --enable-dynamic=mixed. |
| * Optimize xzdec for size, following suggestion in PACKAGERS. |
| - debian/rules: Build xzdec separately so it can be optimized for size. |
| - debian/control: Build-Depends: debhelper (>= 7.3.0). |
| * Generate upstream changelog instead of shipping placeholder. |
| - debian/README.source: Add instructions for regenerating upstream |
| changelog file. |
| - debian/changelog.upstream.sh: New script. |
| - debian/rules: Install generated changelog file. |
| * liblzma-doc: Drop documentation already shipped in |
| /usr/share/doc/xz-utils. |
| * liblzma-dev, liblzma-doc: Add short README.Debian with pointers to |
| development documentation. |
| * Drop debian/xzdec.1, since upstream ships a better man page. |
| * Run autotools at build time. |
| + debian/control: |
| - Build-Depends: autoconf, automake, libtool, gettext |
| - Build-Conflicts: autoconf2.13, automake1.4 |
| + debian/rules: |
| - configure: autoreconf -fi |
| - clean: remove autotools-generated files to avoid .diff.gz |
| changes when built twice in a row. |
| * debian/rules: Add get-orig-source target. |
| * Prepare for upload to experimental. |
| |
| [ Cristian Greco ] |
| * debian/copyright: refer to versioned GPL-3 file. |
| * debian/control: remove duplicate field ‘section’ in package xz-utils. |
| |
| -- Jonathan Nieder <jrnieder@gmail.com> Wed, 30 Sep 2009 01:44:04 -0500 |
| |
| xz-utils (4.999.8beta-1) experimental; urgency=low |
| |
| [ Jonathan Nieder ] |
| * Initial package for Debian. (Closes: #518803) |
| + debian/rules: |
| - add minimal rules file (using Debhelper 7), a control file |
| describing the binary packages, and an appropriate compat file. |
| - use configure --enable-dynamic; use up-to-date config.guess and |
| config.sub files. |
| - do not run automake and so on on autobuilders. Instead, we can |
| run them ourselves when we build the source package. |
| + debian/README.source: |
| - add informations about the packaging GIT repository. |
| * Add liblzma-doc package with Doxygen-generated API docs. |
| |
| [ Mohammed Adnène Trojette ] |
| * Prepare for upload to experimental. |
| |
| -- Mohammed Adnène Trojette <adn+deb@diwi.org> Sat, 27 Jun 2009 17:26:56 +0200 |
