GIT 0.99.9m aka 1.0rc5
Signed-off-by: Junio C Hamano <junkio@cox.net>
diff --git a/Documentation/Makefile b/Documentation/Makefile
index be4f3e1..a1ff2c2 100644
--- a/Documentation/Makefile
+++ b/Documentation/Makefile
@@ -9,6 +9,7 @@
ARTICLES += howto-index
ARTICLES += repository-layout
ARTICLES += hooks
+ARTICLES += everyday
# with their own formatting rules.
SP_ARTICLES = glossary howto/revert-branch-rebase
diff --git a/Documentation/cvs-migration.txt b/Documentation/cvs-migration.txt
index 57436f0..dc9387b 100644
--- a/Documentation/cvs-migration.txt
+++ b/Documentation/cvs-migration.txt
@@ -187,7 +187,8 @@
We have already talked about the "\--stdin" form of git-diff-tree
command that reads the list of commits and compares each commit
-with its parents. The git-whatchanged command internally runs
+with its parents (otherwise you should go back and read the tutorial).
+The git-whatchanged command internally runs
the equivalent of the above command, and can be used like this:
$ git-whatchanged -p -S'if (frotz) {
diff --git a/Documentation/everyday.txt b/Documentation/everyday.txt
new file mode 100644
index 0000000..5775cd2
--- /dev/null
+++ b/Documentation/everyday.txt
@@ -0,0 +1,138 @@
+Everyday GIT With 20 Commands Or So
+===================================
+
+GIT suite has over 100 commands, and the manual page for each of
+them discusses what the command does and how it is used in
+detail, but until you know what command should be used in order
+to achieve what you want to do, you cannot tell which manual
+page to look at, and if you know that already you do not need
+the manual.
+
+Does that mean you need to know all of them before you can use
+git? Not at all. Depending on the role you play, the set of
+commands you need to know is slightly different, but in any case
+what you need to learn is far smaller than the full set of
+commands to carry out your day-to-day work. This document is to
+serve as a cheat-sheet and a set of pointers for people playing
+various roles.
+
+<<Basic Repository>> commands are needed by people who has a
+repository --- that is everybody, because every working tree of
+git is a repository.
+
+In addition, <<Individual Developer (Standalone)>> commands are
+essential for anybody who makes a commit, even for somebody who
+works alone.
+
+If you work with other people, you will need commands listed in
+<<Individual Developer (Participant)>> section as well.
+
+People who play <<Integrator>> role need to learn some more
+commands in addition to the above.
+
+<<Repository Administration>> commands are for system
+administrators who are responsible to care and feed git
+repositories to support developers.
+
+
+Basic Repository[[Basic Repository]]
+------------------------------------
+
+Everybody uses these commands to feed and care git repositories.
+
+ * gitlink:git-init-db[1] or gitlink:git-clone[1] to create a
+ new repository.
+
+ * gitlink:git-fsck-objects[1] to validate the repository.
+
+ * gitlink:git-prune[1] to garbage collect crufts in the
+ repository.
+
+ * gitlink:git-repack[1] to pack loose objects for efficiency.
+
+Individual Developer (Standalone)[[Individual Developer (Standalone)]]
+----------------------------------------------------------------------
+
+A standalone individual developer does not exchange patches with
+other poeple, and works alone in a single repository, using the
+following commands.
+
+ * gitlink:git-show-branch[1] to see where you are.
+
+ * gitlink:git-diff[1] and gitlink:git-status[1] to see what
+ you are in the middle of doing.
+
+ * gitlink:git-log[1] to see what happened.
+
+ * gitlink:git-whatchanged[1] to find out where things have
+ come from.
+
+ * gitlink:git-checkout[1] and gitlink:git-branch[1] to switch
+ branches.
+
+ * gitlink:git-update-index[1] to manage the index file.
+
+ * gitlink:git-commit[1] to advance the current branch.
+
+ * gitlink:git-reset[1] and gitlink:git-checkout[1] (with
+ pathname parameters) to undo changes.
+
+ * gitlink:git-pull[1] with "." as the remote to merge between
+ local branches.
+
+ * gitlink:git-rebase[1] to maintain topic branches.
+
+
+Individual Developer (Participant)[[Individual Developer (Participant)]]
+------------------------------------------------------------------------
+
+A developer working as a participant in a group project needs to
+learn how to communicate with others, and uses these commands in
+addition to the ones needed by a standalone developer.
+
+ * gitlink:git-pull[1] from "origin" to keep up-to-date with
+ the upstream.
+
+ * gitlink:git-push[1] to shared repository if you adopt CVS
+ style shared repository workflow.
+
+ * gitlink:git-format-patch[1] to prepare e-mail submission, if
+ you adopt Linux kernel-style public forum workflow.
+
+
+Integrator[[Integrator]]
+------------------------
+
+A fairly central person acting as the integrator in a group
+project receives changes made by others, reviews and integrates
+them and publishes the result for others to use, using these
+commands in addition to the ones needed by participants.
+
+ * gitlink:git-am[1] to apply patches e-mailed in from your
+ contributors.
+
+ * gitlink:git-pull[1] to merge from your trusted lieutenants.
+
+ * gitlink:git-format-patch[1] to prepare and send suggested
+ alternative to contributors.
+
+ * gitlink:git-revert[1] to undo botched commits.
+
+ * gitlink:git-push[1] to publish the bleeding edge.
+
+
+Repository Administration[[Repository Administration]]
+------------------------------------------------------
+
+A repository administrator uses the following tools to set up
+and maintain access to the repository by developers.
+
+ * gitlink:git-daemon[1] to allow anonymous download from
+ repository.
+
+ * gitlink:git-shell[1] can be used as a 'restricted login shell'
+ for shared central repository users.
+
+ * link:howto/update-hook-example.txt[update hook howto] has a
+ good example of managing a shared central repository.
+
diff --git a/Documentation/git-am.txt b/Documentation/git-am.txt
index 1ceed11..6645e82 100644
--- a/Documentation/git-am.txt
+++ b/Documentation/git-am.txt
@@ -28,7 +28,7 @@
area to store extracted patches.
--utf8, --keep::
- Pass `--utf8` and `--keep` flags to `git-mailinfo` (see
+ Pass `-u` and `-k` flags to `git-mailinfo` (see
gitlink:git-mailinfo[1]).
--binary::
diff --git a/Documentation/git-bisect.txt b/Documentation/git-bisect.txt
index 8a39970..ac4b496 100644
--- a/Documentation/git-bisect.txt
+++ b/Documentation/git-bisect.txt
@@ -8,16 +8,21 @@
SYNOPSIS
--------
- 'git bisect' start
- 'git bisect' bad <rev>
- 'git bisect' good <rev>
- 'git bisect' reset [<branch>]
- 'git bisect' visualize
- 'git bisect' replay <logfile>
- 'git bisect' log
+'git bisect' <subcommand> <options>
DESCRIPTION
-----------
+The command takes various subcommands, and different options
+depending on the subcommand:
+
+ git bisect start [<paths>...]
+ git bisect bad <rev>
+ git bisect good <rev>
+ git bisect reset [<branch>]
+ git bisect visualize
+ git bisect replay <logfile>
+ git bisect log
+
This command uses 'git-rev-list --bisect' option to help drive
the binary search process to find which change introduced a bug,
given an old "good" commit object name and a later "bad" commit
@@ -26,10 +31,10 @@
The way you use it is:
------------------------------------------------
-git bisect start
-git bisect bad # Current version is bad
-git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
- # tested that was good
+$ git bisect start
+$ git bisect bad # Current version is bad
+$ git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
+ # tested that was good
------------------------------------------------
When you give at least one bad and one good versions, it will
@@ -43,7 +48,7 @@
it. Now, let's say that this booted kernel works fine, then just do
------------------------------------------------
-git bisect good # this one is good
+$ git bisect good # this one is good
------------------------------------------------
which will now say
@@ -62,7 +67,7 @@
Oh, and then after you want to reset to the original head, do a
------------------------------------------------
-git bisect reset
+$ git bisect reset
------------------------------------------------
to get back to the master branch, instead of being in one of the bisection
@@ -72,7 +77,9 @@
During the bisection process, you can say
- git bisect visualize
+------------
+$ git bisect visualize
+------------
to see the currently remaining suspects in `gitk`.
@@ -80,11 +87,40 @@
log` shows what you have done so far. You can truncate its
output somewhere and save it in a file, and run
- git bisect replay that-file
+------------
+$ git bisect replay that-file
+------------
if you find later you made a mistake telling good/bad about a
revision.
+If in a middle of bisect session, you know what the bisect
+suggested to try next is not a good one to test (e.g. the change
+the commit introduces is known not to work in your environment
+and you know it does not have anything to do with the bug you
+are chasing), you may want to find a near-by commit and try that
+instead. It goes something like this:
+
+------------
+$ git bisect good/bad # previous round was good/bad.
+Bisecting: 337 revisions left to test after this
+$ git bisect visualize # oops, that is uninteresting.
+$ git reset --hard HEAD~3 # try 3 revs before what
+ # was suggested
+------------
+
+Then compile and test the one you chose to try. After that,
+tell bisect what the result was as usual.
+
+You can further cut down the number of trials if you know what
+part of the tree is involved in the problem you are tracking
+down, by giving paths parameters when you say `bisect start`,
+like this:
+
+------------
+$ git bisect start arch/i386 include/asm-i386
+------------
+
Author
------
diff --git a/Documentation/git-checkout-index.txt b/Documentation/git-checkout-index.txt
index 5bff486..9f32c65 100644
--- a/Documentation/git-checkout-index.txt
+++ b/Documentation/git-checkout-index.txt
@@ -9,7 +9,7 @@
SYNOPSIS
--------
'git-checkout-index' [-u] [-q] [-a] [-f] [-n] [--prefix=<string>]
- [--] <file>...
+ [--stage=<number>] [--] <file>...
DESCRIPTION
-----------
@@ -40,58 +40,80 @@
When creating files, prepend <string> (usually a directory
including a trailing /)
+--stage=<number>::
+ Instead of checking out unmerged entries, copy out the
+ files from named stage. <number> must be between 1 and 3.
+
--::
Do not interpret any more arguments as options.
The order of the flags used to matter, but not anymore.
-Just doing "git-checkout-index" does nothing. You probably meant
-"git-checkout-index -a". And if you want to force it, you want
-"git-checkout-index -f -a".
+Just doing `git-checkout-index` does nothing. You probably meant
+`git-checkout-index -a`. And if you want to force it, you want
+`git-checkout-index -f -a`.
Intuitiveness is not the goal here. Repeatability is. The reason for
-the "no arguments means no work" thing is that from scripts you are
-supposed to be able to do things like:
+the "no arguments means no work" behavior is that from scripts you are
+supposed to be able to do:
- find . -name '*.h' -print0 | xargs -0 git-checkout-index -f --
+----------------
+$ find . -name '*.h' -print0 | xargs -0 git-checkout-index -f --
+----------------
which will force all existing `*.h` files to be replaced with their
cached copies. If an empty command line implied "all", then this would
force-refresh everything in the index, which was not the point.
-To update and refresh only the files already checked out:
+The `--` is just a good idea when you know the rest will be filenames;
+it will prevent problems with a filename of, for example, `-a`.
+Using `--` is probably a good policy in scripts.
- git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh
-Oh, and the "--" is just a good idea when you know the rest will be
-filenames. Just so that you wouldn't have a filename of "-a" causing
-problems (not possible in the above example, but get used to it in
-scripting!).
+EXAMPLES
+--------
+To update and refresh only the files already checked out::
++
+----------------
+$ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh
+----------------
-The prefix ability basically makes it trivial to use
-git-checkout-index as an "export as tree" function. Just read the
-desired tree into the index, and do a
-
- git-checkout-index --prefix=git-export-dir/ -a
-
-and git-checkout-index will "export" the index into the specified
+Using `git-checkout-index` to "export an entire tree"::
+ The prefix ability basically makes it trivial to use
+ `git-checkout-index` as an "export as tree" function.
+ Just read the desired tree into the index, and do:
++
+----------------
+$ git-checkout-index --prefix=git-export-dir/ -a
+----------------
++
+`git-checkout-index` will "export" the index into the specified
directory.
++
+The final "/" is important. The exported name is literally just
+prefixed with the specified string. Contrast this with the
+following example.
-NOTE The final "/" is important. The exported name is literally just
-prefixed with the specified string, so you can also do something like
+Export files with a prefix::
++
+----------------
+$ git-checkout-index --prefix=.merged- Makefile
+----------------
++
+This will check out the currently cached copy of `Makefile`
+into the file `.merged-Makefile`.
- git-checkout-index --prefix=.merged- Makefile
-
-to check out the currently cached copy of `Makefile` into the file
-`.merged-Makefile`
Author
------
Written by Linus Torvalds <torvalds@osdl.org>
+
Documentation
--------------
-Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
+Documentation by David Greaves,
+Junio C Hamano and the git-list <git@vger.kernel.org>.
+
GIT
---
diff --git a/Documentation/git-cherry-pick.txt b/Documentation/git-cherry-pick.txt
index 26e0467..4f323fa 100644
--- a/Documentation/git-cherry-pick.txt
+++ b/Documentation/git-cherry-pick.txt
@@ -7,7 +7,7 @@
SYNOPSIS
--------
-'git-cherry-pick' [-n] [-r] <commit>
+'git-cherry-pick' [--edit] [-n] [-r] <commit>
DESCRIPTION
-----------
@@ -20,15 +20,19 @@
<commit>::
Commit to cherry-pick.
--r::
+-e|--edit::
+ With this option, `git-cherry-pick` will let you edit the commit
+ message prior committing.
+
+-r|--replay::
Usually the command appends which commit was
cherry-picked after the original commit message when
making a commit. This option, '--replay', causes it to
use the original commit message intact. This is useful
when you are reordering the patches in your private tree
- before publishing, and is used by 'git rebase'.
+ before publishing.
--n::
+-n|--no-commit::
Usually the command automatically creates a commit with
a commit log message stating which commit was
cherry-picked. This flag applies the change necessary
diff --git a/Documentation/git-commit.txt b/Documentation/git-commit.txt
index 1edc278..b92cf48 100644
--- a/Documentation/git-commit.txt
+++ b/Documentation/git-commit.txt
@@ -7,7 +7,7 @@
SYNOPSIS
--------
-'git-commit' [-a] [-s] [-v] [(-c | -C) <commit> | -F <file> | -m <msg>] [-e] <file>...
+'git-commit' [-a] [-s] [-v] [(-c | -C) <commit> | -F <file> | -m <msg>] [-e] [--] <file>...
DESCRIPTION
-----------
@@ -22,7 +22,7 @@
OPTIONS
-------
--a::
+-a|--all::
Update all paths in the index file.
-c or -C <commit>::
@@ -39,23 +39,29 @@
-m <msg>::
Use the given <msg> as the commit message.
--s::
+-s|--signoff::
Add Signed-off-by line at the end of the commit message.
--v::
+-v|--verify::
Look for suspicious lines the commit introduces, and
abort committing if there is one. The definition of
'suspicious lines' is currently the lines that has
trailing whitespaces, and the lines whose indentation
has a SP character immediately followed by a TAB
- character.
+ character. This is the default.
--e::
+-n|--no-verify::
+ The opposite of `--verify`.
+
+-e|--edit::
The message taken from file with `-F`, command line with
`-m`, and from file with `-C` are usually used as the
commit log message unmodified. This option lets you
further edit the message taken from these sources.
+--::
+ Do not interpret any more arguments as options.
+
<file>...::
Update specified paths in the index file before committing.
diff --git a/Documentation/git-cvsimport.txt b/Documentation/git-cvsimport.txt
index 88bd3b0..f89b251 100644
--- a/Documentation/git-cvsimport.txt
+++ b/Documentation/git-cvsimport.txt
@@ -60,7 +60,7 @@
+
If you need to pass multiple options, separate them with a comma.
--P:: <cvsps-output-file>
+-P <cvsps-output-file>::
Instead of calling cvsps, read the provided cvsps output file. Useful
for debugging or when cvsps is being handled outside cvsimport.
diff --git a/Documentation/git-diff.txt b/Documentation/git-diff.txt
index cadaf59..cf7527f 100644
--- a/Documentation/git-diff.txt
+++ b/Documentation/git-diff.txt
@@ -17,14 +17,16 @@
The combination of what is compared with what is determined by
the number of ents given to the command.
-`----------------`--------`-----------------------------`------------------
-Number of ents Options What's Compared Underlying command
----------------------------------------------------------------------------
-0 - index file and working tree git-diff-files
-1 --cached ent and index file git-diff-index
-1 - ent and working tree git-diff-index
-2 - two ents git-diff-tree
----------------------------------------------------------------------------
+* When no <ent> is given, the working tree and the index
+ file is compared, using `git-diff-files`.
+
+* When one <ent> is given, the working tree and the named
+ tree is compared, using `git-diff-index`. The option
+ `--cached` can be given to compare the index file and
+ the named tree.
+
+* When two <ent>s are given, these two trees are compared
+ using `git-diff-tree`.
OPTIONS
-------
diff --git a/Documentation/git-fetch.txt b/Documentation/git-fetch.txt
index 438240c..d1b45f9 100644
--- a/Documentation/git-fetch.txt
+++ b/Documentation/git-fetch.txt
@@ -18,7 +18,7 @@
The ref names and their object names of fetched refs are stored
in `.git/FETCH_HEAD`. This information is left for a later merge
-operation done by "git resolve" or "git octopus".
+operation done by "git merge".
OPTIONS
diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 7a3abec..abb8fc8 100644
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -8,7 +8,7 @@
SYNOPSIS
--------
-'git-format-patch' [-n][-o <dir>|--stdout][-k][--mbox][--diff-options] <his> [<mine>]
+'git-format-patch' [-n | -k] [-o <dir> | --stdout] [-s] [-c] [--mbox] [--diff-options] <his> [<mine>]
DESCRIPTION
-----------
@@ -32,23 +32,34 @@
OPTIONS
-------
--o <dir>::
+-o|--output-directory <dir>::
Use <dir> to store the resulting files, instead of the
current working directory.
--n::
+-n|--numbered::
Name output in '[PATCH n/m]' format.
--k::
+-k|--keep-subject::
Do not strip/add '[PATCH]' from the first line of the
commit log message.
---author, --date::
+-a|--author, -d|--date::
Output From: and Date: headers for commits made by
yourself as well. Usually these are output only for
commits made by people other than yourself.
---mbox::
+-s|--signoff::
+ Add `Signed-off-by:` line to the commit message, using
+ the committer identity of yourself.
+
+-c|--check::
+ Display suspicious lines in the patch. The definition
+ of 'suspicious lines' is currently the lines that has
+ trailing whitespaces, and the lines whose indentation
+ has a SP character immediately followed by a TAB
+ character.
+
+-m|--mbox::
Format the output files for closer to mbox format by
adding a phony Unix "From " line, so they can be
concatenated together and fed to `git-applymbox`.
diff --git a/Documentation/git-hash-object.txt b/Documentation/git-hash-object.txt
index 07d2c42..0924931 100644
--- a/Documentation/git-hash-object.txt
+++ b/Documentation/git-hash-object.txt
@@ -8,7 +8,7 @@
SYNOPSIS
--------
-'git-hash-object' [-t <type>] [-w] <any-file-on-the-filesystem>
+'git-hash-object' [-t <type>] [-w] [--stdin] [--] <file>...
DESCRIPTION
-----------
@@ -29,6 +29,9 @@
-w::
Actually write the object into the object database.
+--stdin::
+ Read the object from standard input instead of from a file.
+
Author
------
Written by Junio C Hamano <junkio@cox.net>
diff --git a/Documentation/git-http-fetch.txt b/Documentation/git-http-fetch.txt
index 088624f..1116e85 100644
--- a/Documentation/git-http-fetch.txt
+++ b/Documentation/git-http-fetch.txt
@@ -14,6 +14,12 @@
-----------
Downloads a remote git repository via HTTP.
+OPTIONS
+-------
+commit-id::
+ Either the hash or the filename under [URL]/refs/ to
+ pull.
+
-c::
Get the commit objects.
-t::
diff --git a/Documentation/git-init-db.txt b/Documentation/git-init-db.txt
index ef1826a..4486f0c 100644
--- a/Documentation/git-init-db.txt
+++ b/Documentation/git-init-db.txt
@@ -8,7 +8,14 @@
SYNOPSIS
--------
-'git-init-db'
+'git-init-db' [--template=<template_directory>]
+
+
+OPTIONS
+-------
+--template=<template_directory>::
+ Provide the directory in from which templates will be used.
+
DESCRIPTION
-----------
@@ -16,14 +23,26 @@
and `.git/object/??/`, `.git/refs/heads` and `.git/refs/tags` directories,
and links `.git/HEAD` symbolically to `.git/refs/heads/master`.
-If the 'GIT_DIR' environment variable is set then it specifies a path
+If the `$GIT_DIR` environment variable is set then it specifies a path
to use instead of `./.git` for the base of the repository.
-If the object storage directory is specified via the 'GIT_OBJECT_DIRECTORY'
+If the object storage directory is specified via the `$GIT_OBJECT_DIRECTORY`
environment variable then the sha1 directories are created underneath -
otherwise the default `$GIT_DIR/objects` directory is used.
-"git-init-db" won't hurt an existing repository.
+`git-init-db` won't hurt an existing repository.
+
+
+EXAMPLES
+--------
+
+Start a new git repository for an existing code base::
++
+----------------
+$ cd /path/to/my/codebase
+$ git-init-db
+----------------
+
Author
diff --git a/Documentation/git-ls-remote.txt b/Documentation/git-ls-remote.txt
index c0a80d4..66fe60f 100644
--- a/Documentation/git-ls-remote.txt
+++ b/Documentation/git-ls-remote.txt
@@ -17,7 +17,7 @@
OPTIONS
-------
---heads --tags::
+-h|--heads, -t|--tags::
Limit to only refs/heads and refs/tags, respectively.
These options are _not_ mutually exclusive; when given
both, references stored in refs/heads and refs/tags are
diff --git a/Documentation/git-ls-tree.txt b/Documentation/git-ls-tree.txt
index ba0438e..b92a8b2 100644
--- a/Documentation/git-ls-tree.txt
+++ b/Documentation/git-ls-tree.txt
@@ -8,12 +8,15 @@
SYNOPSIS
--------
-'git-ls-tree' [-d] [-r] [-z] <tree-ish> [paths...]
+'git-ls-tree' [-d] [-r] [-t] [-z] [--name-only] [--name-status] <tree-ish> [paths...]
DESCRIPTION
-----------
-Lists the contents of a tree object, like what "/bin/ls -a" does
-in the current working directory.
+Lists the contents of a given tree object, like what "/bin/ls -a" does
+in the current working directory. Note that the usage is subtly different,
+though - 'paths' denote just a list of patterns to match, e.g. so specifying
+directory name (without '-r') will behave differently, and order of the
+arguments does not matter.
OPTIONS
-------
@@ -21,36 +24,48 @@
Id of a tree-ish.
-d::
- show only the named tree entry itself, not its children
+ Show only the named tree entry itself, not its children.
-r::
- recurse into sub-trees
+ Recurse into sub-trees.
+
+-t::
+ Show tree entries even when going to recurse them. Has no effect
+ if '-r' was not passed. '-d' implies '-t'.
-z::
- \0 line termination on output
+ \0 line termination on output.
+
+--name-only::
+--name-status::
+ List only filenames (instead of the "long" output), one per line.
paths::
- When paths are given, show them. Otherwise implicitly
- uses the root level of the tree as the sole path argument.
+ When paths are given, show them (note that this isn't really raw
+ pathnames, but rather a list of patterns to match). Otherwise
+ implicitly uses the root level of the tree as the sole path argument.
Output Format
-------------
<mode> SP <type> SP <object> TAB <file>
-When `-z` option is not used, TAB, LF, and backslash characters
-in pathnames are represented as `\t`, `\n`, and `\\`,
-respectively.
+When the `-z` option is not used, TAB, LF, and backslash characters
+in pathnames are represented as `\t`, `\n`, and `\\`, respectively.
Author
------
-Written by Linus Torvalds <torvalds@osdl.org>
-Completely rewritten from scratch by Junio C Hamano <junkio@cox.net>
+Written by Petr Baudis <pasky@suse.cz>
+Completely rewritten from scratch by Junio C Hamano <junkio@cox.net>,
+another major rewrite by Linus Torvalds <torvalds@osdl.org>
Documentation
--------------
-Documentation by David Greaves, Junio C Hamano and the git-list <git@vger.kernel.org>.
+Documentation by David Greaves, Junio C Hamano and the git-list
+<git@vger.kernel.org>.
+
+This manual page is a stub. You can help the git documentation by expanding it.
GIT
---
diff --git a/Documentation/git-merge-index.txt b/Documentation/git-merge-index.txt
index 6030642..fbc986a 100644
--- a/Documentation/git-merge-index.txt
+++ b/Documentation/git-merge-index.txt
@@ -20,7 +20,7 @@
OPTIONS
-------
--::
- Interpret all following arguments as filenames.
+ Do not interpret any more arguments as options.
-a::
Run merge against all files in the index that need merging.
diff --git a/Documentation/git-mv.txt b/Documentation/git-mv.txt
index 3013b8d..d242b39 100644
--- a/Documentation/git-mv.txt
+++ b/Documentation/git-mv.txt
@@ -8,12 +8,15 @@
SYNOPSIS
--------
- 'git-mv' [-f] [-n] <source> <destination>
- 'git-mv' [-f] [-n] [-k] <source> ... <destination directory>
+'git-mv' <options>... <args>...
DESCRIPTION
-----------
This script is used to move or rename a file, directory or symlink.
+
+ git-mv [-f] [-n] <source> <destination>
+ git-mv [-f] [-n] [-k] <source> ... <destination directory>
+
In the first form, it renames <source>, which must exist and be either
a file, symlink or directory, to <destination>.
In the second form, the last argument has to be an existing
diff --git a/Documentation/git-pack-objects.txt b/Documentation/git-pack-objects.txt
index d1e93db..009ec5a 100644
--- a/Documentation/git-pack-objects.txt
+++ b/Documentation/git-pack-objects.txt
@@ -8,7 +8,7 @@
SYNOPSIS
--------
-'git-pack-objects' [--local] [--incremental] [--window=N] [--depth=N] {--stdout | base-name} < object-list
+'git-pack-objects' [--non-empty] [--local] [--incremental] [--window=N] [--depth=N] {--stdout | base-name} < object-list
DESCRIPTION
@@ -70,6 +70,10 @@
that are packed and not in the local object store
(i.e. borrowed from an alternate).
+--non-empty::
+ Only create a packed archive if it would contain at
+ least one object.
+
Author
------
Written by Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/git-prune-packed.txt b/Documentation/git-prune-packed.txt
index 8d96a91..37c53a9 100644
--- a/Documentation/git-prune-packed.txt
+++ b/Documentation/git-prune-packed.txt
@@ -9,19 +9,22 @@
SYNOPSIS
--------
-'git-prune-packed'
+'git-prune-packed' [-n]
+
DESCRIPTION
-----------
-This program search the GIT_OBJECT_DIR for all objects that currently exist in
-a pack file as well as the independent object directories.
+This program search the `$GIT_OBJECT_DIR` for all objects that currently
+exist in a pack file as well as the independent object directories.
All such extra objects are removed.
A pack is a collection of objects, individually compressed, with delta
compression applied, stored in a single file, with an associated index file.
-Packs are used to reduce the load on mirror systems, backup engines, disk storage, etc.
+Packs are used to reduce the load on mirror systems, backup engines,
+disk storage, etc.
+
OPTIONS
-------
diff --git a/Documentation/git-prune.txt b/Documentation/git-prune.txt
index 3367c9b..f694fcb 100644
--- a/Documentation/git-prune.txt
+++ b/Documentation/git-prune.txt
@@ -8,15 +8,16 @@
SYNOPSIS
--------
-'git-prune' [-n]
+'git-prune' [-n] [--] [<head>...]
DESCRIPTION
-----------
-This runs `git-fsck-objects --unreachable` using the heads
-specified on the command line (or `$GIT_DIR/refs/heads/\*` and
-`$GIT_DIR/refs/tags/\*` if none is specified), and prunes all
-unreachable objects from the object database. In addition, it
+This runs `git-fsck-objects --unreachable` using all the refs
+available in `$GIT_DIR/refs`, optionally with additional set of
+objects specified on the command line, and prunes all
+objects unreachable from any of these head objects from the object database.
+In addition, it
prunes the unpacked objects that are also found in packs by
running `git prune-packed`.
@@ -27,6 +28,24 @@
Do not remove anything; just report what it would
remove.
+--::
+ Do not interpret any more arguments as options.
+
+<head>...::
+ In addition to objects
+ reachable from any of our references, keep objects
+ reachable from listed <head>s.
+
+EXAMPLE
+-------
+
+To prune objects not used by your repository nor another that
+borrows from your repository via its
+`.git/objects/info/alternates`:
+
+------------
+$ git prune $(cd ../another && $(git-rev-parse --all))
+------------
Author
------
diff --git a/Documentation/git-push.txt b/Documentation/git-push.txt
index f45ac5e..2254bac 100644
--- a/Documentation/git-push.txt
+++ b/Documentation/git-push.txt
@@ -16,6 +16,10 @@
Updates remote refs using local refs, while sending objects
necessary to complete the given refs.
+You can make "interesting" things to happen on the repository
+every time you push into it, by setting up 'hooks' there. See
+documentation for gitlink:git-receive-pack[1].
+
OPTIONS
-------
@@ -31,6 +35,7 @@
This flag disables the check. What this means is that the
local repository can lose commits; use it with care.
+
Author
------
Written by Junio C Hamano <junkio@cox.net>
diff --git a/Documentation/git-read-tree.txt b/Documentation/git-read-tree.txt
index 6e92e4a..6fbd6d9 100644
--- a/Documentation/git-read-tree.txt
+++ b/Documentation/git-read-tree.txt
@@ -8,22 +8,22 @@
SYNOPSIS
--------
-'git-read-tree' (<tree-ish> | [-m [-u|-i]] <tree-ish1> [<tree-ish2> [<tree-ish3>]])
+'git-read-tree' (<tree-ish> | [[-m | --reset] [-u | -i]] <tree-ish1> [<tree-ish2> [<tree-ish3>]])
DESCRIPTION
-----------
Reads the tree information given by <tree-ish> into the index,
but does not actually *update* any of the files it "caches". (see:
-git-checkout-index)
+gitlink:git-checkout-index[1])
Optionally, it can merge a tree into the index, perform a
-fast-forward (i.e. 2-way) merge, or a 3-way merge, with the -m
-flag. When used with -m, the -u flag causes it to also update
+fast-forward (i.e. 2-way) merge, or a 3-way merge, with the `-m`
+flag. When used with `-m`, the `-u` flag causes it to also update
the files in the work tree with the result of the merge.
-Trivial merges are done by "git-read-tree" itself. Only conflicting paths
-will be in unmerged state when "git-read-tree" returns.
+Trivial merges are done by `git-read-tree` itself. Only conflicting paths
+will be in unmerged state when `git-read-tree` returns.
OPTIONS
-------
@@ -56,7 +56,7 @@
Merging
-------
-If '-m' is specified, "git-read-tree" can perform 3 kinds of
+If `-m` is specified, `git-read-tree` can perform 3 kinds of
merge, a single tree merge if only 1 tree is given, a
fast-forward merge with 2 trees, or a 3-way merge if 3 trees are
provided.
@@ -65,23 +65,23 @@
Single Tree Merge
~~~~~~~~~~~~~~~~~
If only 1 tree is specified, git-read-tree operates as if the user did not
-specify '-m', except that if the original index has an entry for a
+specify `-m`, except that if the original index has an entry for a
given pathname, and the contents of the path matches with the tree
being read, the stat info from the index is used. (In other words, the
index's stat()s take precedence over the merged tree's).
-That means that if you do a "git-read-tree -m <newtree>" followed by a
-"git-checkout-index -f -u -a", the "git-checkout-index" only checks out
+That means that if you do a `git-read-tree -m <newtree>` followed by a
+`git-checkout-index -f -u -a`, the `git-checkout-index` only checks out
the stuff that really changed.
-This is used to avoid unnecessary false hits when "git-diff-files" is
-run after git-read-tree.
+This is used to avoid unnecessary false hits when `git-diff-files` is
+run after `git-read-tree`.
Two Tree Merge
~~~~~~~~~~~~~~
-Typically, this is invoked as "git-read-tree -m $H $M", where $H
+Typically, this is invoked as `git-read-tree -m $H $M`, where $H
is the head commit of the current repository, and $M is the head
of a foreign tree, which is simply ahead of $H (i.e. we are in a
fast forward situation).
@@ -94,7 +94,7 @@
2. The user wants to fast-forward to $M.
-In this case, the "git-read-tree -m $H $M" command makes sure
+In this case, the `git-read-tree -m $H $M` command makes sure
that no local change is lost as the result of this "merge".
Here are the "carry forward" rules:
@@ -141,13 +141,13 @@
When this form of git-read-tree returns successfully, you can
see what "local changes" you made are carried forward by running
-"git-diff-index --cached $M". Note that this does not
-necessarily match "git-diff-index --cached $H" would have
+`git-diff-index --cached $M`. Note that this does not
+necessarily match `git-diff-index --cached $H` would have
produced before such a two tree merge. This is because of cases
18 and 19 --- if you already had the changes in $M (e.g. maybe
-you picked it up via e-mail in a patch form), "git-diff-index
---cached $H" would have told you about the change before this
-merge, but it would not show in "git-diff-index --cached $M"
+you picked it up via e-mail in a patch form), `git-diff-index
+--cached $H` would have told you about the change before this
+merge, but it would not show in `git-diff-index --cached $M`
output after two-tree merge.
@@ -156,31 +156,39 @@
Each "index" entry has two bits worth of "stage" state. stage 0 is the
normal one, and is the only one you'd see in any kind of normal use.
-However, when you do "git-read-tree" with three trees, the "stage"
+However, when you do `git-read-tree` with three trees, the "stage"
starts out at 1.
This means that you can do
- git-read-tree -m <tree1> <tree2> <tree3>
+----------------
+$ git-read-tree -m <tree1> <tree2> <tree3>
+----------------
and you will end up with an index with all of the <tree1> entries in
"stage1", all of the <tree2> entries in "stage2" and all of the
-<tree3> entries in "stage3".
+<tree3> entries in "stage3". When performing a merge of another
+branch into the current branch, we use the common ancestor tree
+as <tree1>, the current branch head as <tree2>, and the other
+branch head as <tree3>.
-Furthermore, "git-read-tree" has special-case logic that says: if you see
+Furthermore, `git-read-tree` has special-case logic that says: if you see
a file that matches in all respects in the following states, it
"collapses" back to "stage0":
- stage 2 and 3 are the same; take one or the other (it makes no
- difference - the same work has been done on stage 2 and 3)
+ difference - the same work has been done on our branch in
+ stage 2 and their branch in stage 3)
- stage 1 and stage 2 are the same and stage 3 is different; take
- stage 3 (some work has been done on stage 3)
+ stage 3 (our branch in stage 2 did not do anything since the
+ ancestor in stage 1 while their branch in stage 3 worked on
+ it)
- stage 1 and stage 3 are the same and stage 2 is different take
- stage 2 (some work has been done on stage 2)
+ stage 2 (we did something while they did nothing)
-The "git-write-tree" command refuses to write a nonsensical tree, and it
+The `git-write-tree` command refuses to write a nonsensical tree, and it
will complain about unmerged entries if it sees a single entry that is not
stage 0.
@@ -220,12 +228,10 @@
matching "stage1" entry if it exists too. .. all the normal
trivial rules ..
-You would normally use "git-merge-index" with supplied
-"git-merge-one-file" to do this last step. The script
-does not touch the files in the work tree, and the entire merge
-happens in the index file. In other words, there is no need to
-worry about what is in the working directory, since it is never
-shown and never used.
+You would normally use `git-merge-index` with supplied
+`git-merge-one-file` to do this last step. The script updates
+the files in the working tree as it merges each path and at the
+end of a successful merge.
When you start a 3-way merge with an index file that is already
populated, it is assumed that it represents the state of the
@@ -236,33 +242,54 @@
file that does not match stage 2.
This is done to prevent you from losing your work-in-progress
-changes. To illustrate, suppose you start from what has been
+changes, and mixing your random changes in an unrelated merge
+commit. To illustrate, suppose you start from what has been
commited last to your repository:
- $ JC=`git-rev-parse --verify "HEAD^0"`
- $ git-checkout-index -f -u -a $JC
+----------------
+$ JC=`git-rev-parse --verify "HEAD^0"`
+$ git-checkout-index -f -u -a $JC
+----------------
You do random edits, without running git-update-index. And then
you notice that the tip of your "upstream" tree has advanced
since you pulled from him:
- $ git-fetch rsync://.... linus
- $ LT=`cat .git/MERGE_HEAD`
+----------------
+$ git-fetch git://.... linus
+$ LT=`cat .git/FETCH_HEAD`
+----------------
Your work tree is still based on your HEAD ($JC), but you have
some edits since. Three-way merge makes sure that you have not
added or modified index entries since $JC, and if you haven't,
then does the right thing. So with the following sequence:
- $ git-read-tree -m -u `git-merge-base $JC $LT` $JC $LT
- $ git-merge-index git-merge-one-file -a
- $ echo "Merge with Linus" | \
- git-commit-tree `git-write-tree` -p $JC -p $LT
+----------------
+$ git-read-tree -m -u `git-merge-base $JC $LT` $JC $LT
+$ git-merge-index git-merge-one-file -a
+$ echo "Merge with Linus" | \
+ git-commit-tree `git-write-tree` -p $JC -p $LT
+----------------
-what you would commit is a pure merge between $JC and LT without
+what you would commit is a pure merge between $JC and $LT without
your work-in-progress changes, and your work tree would be
updated to the result of the merge.
+However, if you have local changes in the working tree that
+would be overwritten by this merge,`git-read-tree` will refuse
+to run to prevent your changes from being lost.
+
+In other words, there is no need to worry about what exists only
+in the working tree. When you have local changes in a part of
+the project that is not involved in the merge, your changes do
+not interfere with the merge, and are kept intact. When they
+*do* interfere, the merge does not even start (`git-read-tree`
+complains loudly and fails without modifying anything). In such
+a case, you can simply continue doing what you were in the
+middle of doing, and when your working tree is ready (i.e. you
+have finished your work-in-progress), attempt the merge again.
+
See Also
--------
diff --git a/Documentation/git-receive-pack.txt b/Documentation/git-receive-pack.txt
index 8afde14..60debca 100644
--- a/Documentation/git-receive-pack.txt
+++ b/Documentation/git-receive-pack.txt
@@ -71,6 +71,10 @@
#!/bin/sh
exec git-update-server-info
+There are other real-world examples of using update and
+post-update hooks found in the Documentation/howto directory.
+
+
OPTIONS
-------
<directory>::
diff --git a/Documentation/git-repack.txt b/Documentation/git-repack.txt
index 0c1ae49..9060fe8 100644
--- a/Documentation/git-repack.txt
+++ b/Documentation/git-repack.txt
@@ -9,7 +9,7 @@
SYNOPSIS
--------
-'git-repack' [-a] [-d]
+'git-repack' [-a] [-d] [-l] [-n]
DESCRIPTION
-----------
@@ -39,6 +39,13 @@
After packing, if the newly created packs make some
existing packs redundant, remove the redundant packs.
+-l::
+ Pass the `--local` option to `git pack-objects`, see
+ gitlink:git-pack-objects[1].
+
+-n::
+ Do not update the server information with
+ `git update-server-info`.
Author
------
diff --git a/Documentation/git-revert.txt b/Documentation/git-revert.txt
index feebd81..e27c680 100644
--- a/Documentation/git-revert.txt
+++ b/Documentation/git-revert.txt
@@ -7,7 +7,7 @@
SYNOPSIS
--------
-'git-revert' [-n] <commit>
+'git-revert' [--edit | --no-edit] [-n] <commit>
DESCRIPTION
-----------
@@ -20,7 +20,16 @@
<commit>::
Commit to revert.
--n::
+-e|--edit::
+ With this option, `git-revert` will let you edit the commit
+ message prior committing the revert. This is the default if
+ you run the command from a terminal.
+
+--no-edit::
+ With this option, `git-revert` will not start the commit
+ message editor.
+
+-n|--no-commit::
Usually the command automatically creates a commit with
a commit log message stating which commit was reverted.
This flag applies the change necessary to revert the
diff --git a/Documentation/git-show-branch.txt b/Documentation/git-show-branch.txt
index c6c97b2..ffe64d8 100644
--- a/Documentation/git-show-branch.txt
+++ b/Documentation/git-show-branch.txt
@@ -7,23 +7,40 @@
SYNOPSIS
--------
-'git-show-branch [--all] [--heads] [--tags] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] <reference>...'
+'git-show-branch [--all] [--heads] [--tags] [--topo-order] [--more=<n> | --list | --independent | --merge-base] [--no-name | --sha1-name] [<rev> | <glob>]...'
DESCRIPTION
-----------
-Shows the head commits from the named <reference> (or all refs under
-$GIT_DIR/refs/heads), and displays concise list of commit logs
-to show their relationship semi-visually.
+
+Shows the commit ancestry graph starting from the commits named
+with <rev>s or <globs>s (or all refs under $GIT_DIR/refs/heads
+and/or $GIT_DIR/refs/tags) semi-visually.
+
+It cannot show more than 29 branches and commits at a time.
+
OPTIONS
-------
-<reference>::
- Name of the reference under $GIT_DIR/refs/.
+<rev>::
+ Arbitrary extended SHA1 expression (see `git-rev-parse`)
+ that typically names a branch HEAD or a tag.
+
+<glob>::
+ A glob pattern that matches branch or tag names under
+ $GIT_DIR/refs. For example, if you have many topic
+ branches under $GIT_DIR/refs/heads/topic, giving
+ `topic/*` would show all of them.
--all --heads --tags::
Show all refs under $GIT_DIR/refs, $GIT_DIR/refs/heads,
and $GIT_DIR/refs/tags, respectively.
+--topo-order::
+ By default, the branches and their commits are shown in
+ reverse chronological order. This option makes them
+ appear in topological order (i.e., descendant commits
+ are shown before their parents).
+
--more=<n>::
Usually the command stops output upon showing the commit
that is the common ancestor of all the branches. This
diff --git a/Documentation/git-tag.txt b/Documentation/git-tag.txt
index 841c9dc..e8892bb 100644
--- a/Documentation/git-tag.txt
+++ b/Documentation/git-tag.txt
@@ -10,26 +10,6 @@
--------
'git-tag' [-a | -s | -u <key-id>] [-f | -d] [-m <msg>] <name> [<head>]
-OPTIONS
--------
--a::
- Make an unsigned, annotated tag object
-
--s::
- Make a GPG-signed tag, using the default e-mail address's key
-
--u <key-id>::
- Make a GPG-signed tag, using the given key
-
--f::
- Replace an existing tag with the given name (instead of failing)
-
--d::
- Delete an existing tag with the given name
-
--m <msg>::
- Use the given tag message (instead of prompting)
-
DESCRIPTION
-----------
Adds a 'tag' reference in .git/refs/tags/
@@ -52,6 +32,26 @@
`-d <tag>` deletes the tag.
+OPTIONS
+-------
+-a::
+ Make an unsigned, annotated tag object
+
+-s::
+ Make a GPG-signed tag, using the default e-mail address's key
+
+-u <key-id>::
+ Make a GPG-signed tag, using the given key
+
+-f::
+ Replace an existing tag with the given name (instead of failing)
+
+-d::
+ Delete an existing tag with the given name
+
+-m <msg>::
+ Use the given tag message (instead of prompting)
+
Author
------
diff --git a/Documentation/git-update-index.txt b/Documentation/git-update-index.txt
index fdcb8be..c74311d 100644
--- a/Documentation/git-update-index.txt
+++ b/Documentation/git-update-index.txt
@@ -123,7 +123,9 @@
To pretend you have a file with mode and sha1 at path, say:
- $ git-update-index --cacheinfo mode sha1 path
+----------------
+$ git-update-index --cacheinfo mode sha1 path
+----------------
'--info-only' is used to register files without placing them in the object
database. This is useful for status-only repositories.
@@ -134,11 +136,70 @@
useful when the file is available, but you do not wish to update the
object database.
+
+Using --index-info
+------------------
+
+`--index-info` is a more powerful mechanism that lets you feed
+multiple entry definitions from the standard input, and designed
+specifically for scripts. It can take inputs of three formats:
+
+ . mode SP sha1 TAB path
++
+The first format is what "git-apply --index-info"
+reports, and used to reconstruct a partial tree
+that is used for phony merge base tree when falling
+back on 3-way merge.
+
+ . mode SP type SP sha1 TAB path
++
+The second format is to stuff git-ls-tree output
+into the index file.
+
+ . mode SP sha1 SP stage TAB path
++
+This format is to put higher order stages into the
+index file and matches git-ls-files --stage output.
+
+To place a higher stage entry to the index, the path should
+first be removed by feeding a mode=0 entry for the path, and
+then feeding necessary input lines in the third format.
+
+For example, starting with this index:
+
+------------
+$ git ls-files -s
+100644 8a1218a1024a212bb3db30becd860315f9f3ac52 0 frotz
+------------
+
+you can feed the following input to `--index-info`:
+
+------------
+$ git update-index --index-info
+0 0000000000000000000000000000000000000000 frotz
+100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz
+100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz
+------------
+
+The first line of the input feeds 0 as the mode to remove the
+path; the SHA1 does not matter as long as it is well formatted.
+Then the second and third line feeds stage 1 and stage 2 entries
+for that path. After the above, we would end up with this:
+
+------------
+$ git ls-files -s
+100644 8a1218a1024a212bb3db30becd860315f9f3ac52 1 frotz
+100755 8a1218a1024a212bb3db30becd860315f9f3ac52 2 frotz
+------------
+
+
Examples
--------
To update and refresh only the files already checked out:
- git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh
+----------------
+$ git-checkout-index -n -f -a && git-update-index --ignore-missing --refresh
+----------------
Configuration
@@ -146,12 +207,18 @@
The command honors `core.filemode` configuration variable. If
your repository is on an filesystem whose executable bits are
-unreliable, this should be set to 'false'. This causes the
-command to ignore differences in file modes recorded in the
-index and the file mode on the filesystem if they differ only on
+unreliable, this should be set to 'false' (see gitlink:git-repo-config[1]).
+This causes the command to ignore differences in file modes recorded
+in the index and the file mode on the filesystem if they differ only on
executable bit. On such an unfortunate filesystem, you may
need to use `git-update-index --chmod=`.
+
+See Also
+--------
+gitlink:git-repo-config[1]
+
+
Author
------
Written by Linus Torvalds <torvalds@osdl.org>
diff --git a/Documentation/git-update-server-info.txt b/Documentation/git-update-server-info.txt
index 3d0dea0..527fb30 100644
--- a/Documentation/git-update-server-info.txt
+++ b/Documentation/git-update-server-info.txt
@@ -22,7 +22,7 @@
OPTIONS
-------
---force::
+-f|--force::
Update the info files from scratch.
diff --git a/Documentation/git-verify-pack.txt b/Documentation/git-verify-pack.txt
index cd74ffd..d032280 100644
--- a/Documentation/git-verify-pack.txt
+++ b/Documentation/git-verify-pack.txt
@@ -8,7 +8,7 @@
SYNOPSIS
--------
-'git-verify-pack' [-v] <pack>.idx ...
+'git-verify-pack' [-v] [--] <pack>.idx ...
DESCRIPTION
@@ -25,6 +25,8 @@
-v::
After verifying the pack, show list of objects contained
in the pack.
+--::
+ Do not interpret any more arguments as options.
OUTPUT FORMAT
-------------
diff --git a/Documentation/git-write-tree.txt b/Documentation/git-write-tree.txt
index abee05f..77e12cb 100644
--- a/Documentation/git-write-tree.txt
+++ b/Documentation/git-write-tree.txt
@@ -14,19 +14,21 @@
-----------
Creates a tree object using the current index.
-The index must be merged.
+The index must be in a fully merged state.
-Conceptually, "git-write-tree" sync()s the current index contents
+Conceptually, `git-write-tree` sync()s the current index contents
into a set of tree files.
In order to have that match what is actually in your directory right
-now, you need to have done a "git-update-index" phase before you did the
-"git-write-tree".
+now, you need to have done a `git-update-index` phase before you did the
+`git-write-tree`.
+
OPTIONS
-------
--missing-ok::
- Normally "git-write-tree" ensures that the objects referenced by the
- directory exist in the object database. This option disables this check.
+ Normally `git-write-tree` ensures that the objects referenced by the
+ directory exist in the object database. This option disables this
+ check.
Author
------
diff --git a/Documentation/git.txt b/Documentation/git.txt
index a518249..45773db 100644
--- a/Documentation/git.txt
+++ b/Documentation/git.txt
@@ -36,31 +36,35 @@
CORE GIT COMMANDS
-----------------
Before reading this cover to cover, you may want to take a look
-at the link:tutorial.html[tutorial] document.
-
-The <<Discussion>> section below contains much useful definition and
-clarification info - read that first. And of the commands, I suggest
-reading gitlink:git-update-index[1] and
-gitlink:git-read-tree[1] first - I wish I had!
-
-If you are migrating from CVS, link:cvs-migration.html[cvs migration]
+at the link:tutorial.html[tutorial] document. If you are
+migrating from CVS, link:cvs-migration.html[cvs migration]
document may be helpful after you finish the tutorial.
+The <<Discussion>> section below contains much useful definition
+and clarification info - read that first. After that, if you
+are interested in using git to manage (version control)
+projects, use link:everyday.html[Everyday GIT] as a guide to the
+minimum set of commands you need to know for day-to-day work.
+
After you get the general feel from the tutorial and this
overview page, you may want to take a look at the
link:howto-index.html[howto] documents.
+If you are writing your own Porcelain, you need to be familiar
+with most of the low level commands --- I suggest starting from
+gitlink:git-update-index[1] and gitlink:git-read-tree[1].
+
David Greaves <david@dgreaves.com>
08/05/05
-Updated by Junio C Hamano <junkio@cox.net> on 2005-05-05 to
-reflect recent changes.
+Updated by Junio C Hamano <junkio@cox.net> on 2005-05-05 and
+further on 2005-12-07 to reflect recent changes.
Commands Overview
-----------------
The git commands can helpfully be split into those that manipulate
-the repository, the index and the working fileset, those that
+the repository, the index and the files in the working tree, those that
interrogate and compare them, and those that moves objects and
references between repositories.
@@ -79,25 +83,26 @@
applies it to the working tree.
gitlink:git-checkout-index[1]::
- Copy files from the index to the working directory
+ Copy files from the index to the working tree.
gitlink:git-commit-tree[1]::
- Creates a new commit object
+ Creates a new commit object.
gitlink:git-hash-object[1]::
Computes the object ID from a file.
gitlink:git-index-pack[1]::
- Build pack index file for an existing packed archive.
+ Build pack idx file for an existing packed archive.
gitlink:git-init-db[1]::
- Creates an empty git object database
+ Creates an empty git object database, or reinitialize an
+ existing one.
gitlink:git-merge-index[1]::
- Runs a merge for files needing merging
+ Runs a merge for files needing merging.
gitlink:git-mktag[1]::
- Creates a tag object
+ Creates a tag object.
gitlink:git-pack-objects[1]::
Creates a packed archive of objects.
@@ -106,7 +111,7 @@
Remove extra objects that are already in pack files.
gitlink:git-read-tree[1]::
- Reads tree information into the directory index
+ Reads tree information into the index.
gitlink:git-repo-config[1]::
Get and set options in .git/config.
@@ -115,65 +120,65 @@
Unpacks objects out of a packed archive.
gitlink:git-update-index[1]::
- Modifies the index or directory cache
+ Registers files in the working tree to the index.
gitlink:git-write-tree[1]::
- Creates a tree from the current index
+ Creates a tree from the index.
Interrogation commands
~~~~~~~~~~~~~~~~~~~~~~
gitlink:git-cat-file[1]::
- Provide content or type information for repository objects
+ Provide content or type/size information for repository objects.
gitlink:git-diff-index[1]::
- Compares content and mode of blobs between the index and repository
+ Compares content and mode of blobs between the index and repository.
gitlink:git-diff-files[1]::
- Compares files in the working tree and the index
+ Compares files in the working tree and the index.
gitlink:git-diff-stages[1]::
- Compares two "merge stages" in the index file.
+ Compares two "merge stages" in the index.
gitlink:git-diff-tree[1]::
- Compares the content and mode of blobs found via two tree objects
+ Compares the content and mode of blobs found via two tree objects.
gitlink:git-fsck-objects[1]::
- Verifies the connectivity and validity of the objects in the database
+ Verifies the connectivity and validity of the objects in the database.
gitlink:git-ls-files[1]::
- Information about files in the index/working directory
+ Information about files in the index and the working tree.
gitlink:git-ls-tree[1]::
- Displays a tree object in human readable form
+ Displays a tree object in human readable form.
gitlink:git-merge-base[1]::
- Finds as good a common ancestor as possible for a merge
+ Finds as good common ancestors as possible for a merge.
gitlink:git-name-rev[1]::
- Find symbolic names for given revs
+ Find symbolic names for given revs.
gitlink:git-rev-list[1]::
- Lists commit objects in reverse chronological order
+ Lists commit objects in reverse chronological order.
gitlink:git-show-index[1]::
Displays contents of a pack idx file.
gitlink:git-tar-tree[1]::
- Creates a tar archive of the files in the named tree
+ Creates a tar archive of the files in the named tree object.
gitlink:git-unpack-file[1]::
- Creates a temporary file with a blob's contents
+ Creates a temporary file with a blob's contents.
gitlink:git-var[1]::
- Displays a git logical variable
+ Displays a git logical variable.
gitlink:git-verify-pack[1]::
- Validates packed git archive files
+ Validates packed git archive files.
-The interrogate commands may create files - and you can force them to
-touch the working file set - but in general they don't
+In general, the interrogate commands do not touch the files in
+the working tree.
Synching repositories
@@ -181,19 +186,24 @@
gitlink:git-clone-pack[1]::
Clones a repository into the current repository (engine
- for ssh and local transport)
+ for ssh and local transport).
gitlink:git-fetch-pack[1]::
- Updates from a remote repository.
+ Updates from a remote repository (engine for ssh and
+ local transport).
gitlink:git-http-fetch[1]::
- Downloads a remote git repository via HTTP
+ Downloads a remote git repository via HTTP by walking
+ commit chain.
gitlink:git-local-fetch[1]::
- Duplicates another git repository on a local system
+ Duplicates another git repository on a local system by
+ walking commit chain.
gitlink:git-peek-remote[1]::
- Lists references on a remote repository using upload-pack protocol.
+ Lists references on a remote repository using
+ upload-pack protocol (engine for ssh and local
+ transport).
gitlink:git-receive-pack[1]::
Invoked by 'git-send-pack' to receive what is pushed to it.
@@ -205,10 +215,11 @@
Restricted shell for GIT-only SSH access.
gitlink:git-ssh-fetch[1]::
- Pulls from a remote repository over ssh connection
+ Pulls from a remote repository over ssh connection by
+ walking commit chain.
gitlink:git-ssh-upload[1]::
- Helper "server-side" program used by git-ssh-fetch
+ Helper "server-side" program used by git-ssh-fetch.
gitlink:git-update-server-info[1]::
Updates auxiliary information on a dumb server to help
@@ -223,16 +234,16 @@
----------------------
gitlink:git-add[1]::
- Add paths to the index file.
+ Add paths to the index.
gitlink:git-am[1]::
Apply patches from a mailbox, but cooler.
gitlink:git-applymbox[1]::
- Apply patches from a mailbox.
+ Apply patches from a mailbox, original version by Linus.
gitlink:git-bisect[1]::
- Find the change that introduced a bug.
+ Find the change that introduced a bug by binary search.
gitlink:git-branch[1]::
Create and Show branches.
@@ -259,7 +270,7 @@
Prepare patches for e-mail submission.
gitlink:git-grep[1]::
- Print lines matching a pattern
+ Print lines matching a pattern.
gitlink:git-log[1]::
Shows commit logs.
@@ -283,7 +294,7 @@
Update remote refs along with associated objects.
gitlink:git-rebase[1]::
- Rebase local commits to new upstream head.
+ Rebase local commits to the updated upstream head.
gitlink:git-repack[1]::
Pack unpacked objects in a repository.
@@ -324,7 +335,7 @@
Import an arch repository into git.
gitlink:git-convert-objects[1]::
- Converts old-style git repository
+ Converts old-style git repository.
gitlink:git-cvsimport[1]::
Salvage your data out of another SCM people love to hate.
@@ -333,10 +344,10 @@
Recover lost refs that luckily have not yet been pruned.
gitlink:git-merge-one-file[1]::
- The standard helper program to use with "git-merge-index"
+ The standard helper program to use with `git-merge-index`.
gitlink:git-prune[1]::
- Prunes all unreachable objects from the object database
+ Prunes all unreachable objects from the object database.
gitlink:git-relink[1]::
Hardlink common objects in local repositories.
@@ -348,10 +359,10 @@
Common git shell script setup code.
gitlink:git-symbolic-ref[1]::
- Read and modify symbolic refs
+ Read and modify symbolic refs.
gitlink:git-tag[1]::
- An example script to create a tag object signed with GPG
+ An example script to create a tag object signed with GPG.
gitlink:git-update-ref[1]::
Update the object name stored in a ref safely.
@@ -375,16 +386,19 @@
Extract commit ID from an archive created using git-tar-tree.
gitlink:git-mailinfo[1]::
- Extracts patch from a single e-mail message.
+ Extracts patch and authorship information from a single
+ e-mail message, optionally transliterating the commit
+ message into utf-8.
gitlink:git-mailsplit[1]::
- git-mailsplit.
+ A stupid program to split UNIX mbox format mailbox into
+ individual pieces of e-mail.
gitlink:git-patch-id[1]::
Compute unique ID for a patch.
gitlink:git-parse-remote[1]::
- Routines to help parsing $GIT_DIR/remotes/
+ Routines to help parsing `$GIT_DIR/remotes/` files.
gitlink:git-request-pull[1]::
git-request-pull.
@@ -406,22 +420,20 @@
---------------------------
gitlink:gitk[1]::
- gitk.
+ The gitk repository browser.
Configuration Mechanism
-----------------------
-Starting from 0.99.9 (actually mid 0.99.8.GIT), .git/config file
+Starting from 0.99.9 (actually mid 0.99.8.GIT), `.git/config` file
is used to hold per-repository configuration options. It is a
simple text file modelled after `.ini` format familiar to some
people. Here is an example:
------------
#
-# This is the config file, and
-# a '#' or ';' character indicates
-# a comment
+# A '#' or ';' character indicates a comment.
#
; core variables
@@ -443,30 +455,30 @@
Identifier Terminology
----------------------
<object>::
- Indicates the sha1 identifier for any type of object
+ Indicates the object name for any type of object.
<blob>::
- Indicates a blob object sha1 identifier
+ Indicates a blob object name.
<tree>::
- Indicates a tree object sha1 identifier
+ Indicates a tree object name.
<commit>::
- Indicates a commit object sha1 identifier
+ Indicates a commit object name.
<tree-ish>::
- Indicates a tree, commit or tag object sha1 identifier. A
+ Indicates a tree, commit or tag object name. A
command that takes a <tree-ish> argument ultimately wants to
operate on a <tree> object but automatically dereferences
<commit> and <tag> objects that point at a <tree>.
<type>::
Indicates that an object type is required.
- Currently one of: blob/tree/commit/tag
+ Currently one of: `blob`, `tree`, `commit`, or `tag`.
<file>::
- Indicates a filename - always relative to the root of
- the tree structure GIT_INDEX_FILE describes.
+ Indicates a filename - almost always relative to the
+ root of the tree structure `GIT_INDEX_FILE` describes.
Symbolic Identifiers
--------------------
@@ -474,17 +486,20 @@
symbolic notation:
HEAD::
- indicates the head of the repository (ie the contents of
- `$GIT_DIR/HEAD`)
+ indicates the head of the current branch (i.e. the
+ contents of `$GIT_DIR/HEAD`).
+
<tag>::
- a valid tag 'name'+
- (ie the contents of `$GIT_DIR/refs/tags/<tag>`)
+ a valid tag 'name'
+ (i.e. the contents of `$GIT_DIR/refs/tags/<tag>`).
+
<head>::
- a valid head 'name'+
- (ie the contents of `$GIT_DIR/refs/heads/<head>`)
+ a valid head 'name'
+ (i.e. the contents of `$GIT_DIR/refs/heads/<head>`).
+
<snap>::
- a valid snapshot 'name'+
- (ie the contents of `$GIT_DIR/refs/snap/<snap>`)
+ a valid snapshot 'name'
+ (i.e. the contents of `$GIT_DIR/refs/snap/<snap>`).
File/Directory Structure
@@ -493,7 +508,7 @@
Please see link:repository-layout.html[repository layout] document.
Higher level SCMs may provide and manage additional information in the
-GIT_DIR.
+`$GIT_DIR`.
Terminology
@@ -509,7 +524,7 @@
~~~~~~~~~~~~~~~~~~
These environment variables apply to 'all' core git commands. Nb: it
is worth noting that they may be used/overridden by SCMS sitting above
-git so take care if using Cogito etc
+git so take care if using Cogito etc.
'GIT_INDEX_FILE'::
This environment allows the specification of an alternate
@@ -530,9 +545,9 @@
written to these directories.
'GIT_DIR'::
- If the 'GIT_DIR' environment variable is set then it specifies
- a path to use instead of `./.git` for the base of the
- repository.
+ If the 'GIT_DIR' environment variable is set then it
+ specifies a path to use instead of the default `.git`
+ for the base of the repository.
git Commits
~~~~~~~~~~~
@@ -559,7 +574,7 @@
Authors
-------
git's founding father is Linus Torvalds <torvalds@osdl.org>.
- The current git nurse is Junio C. Hamano <junkio@cox.net>.
+ The current git nurse is Junio C Hamano <junkio@cox.net>.
The git potty was written by Andres Ericsson <ae@op5.se>.
General upbringing is handled by the git-list <git@vger.kernel.org>.
diff --git a/Documentation/glossary.txt b/Documentation/glossary.txt
index 07df6b4..520f4c5 100644
--- a/Documentation/glossary.txt
+++ b/Documentation/glossary.txt
@@ -20,7 +20,7 @@
object database::
Stores a set of "objects", and an individial object is identified
- by its object name. The object usually live in $GIT_DIR/objects/.
+ by its object name. The objects usually live in `$GIT_DIR/objects/`.
blob object::
Untyped object, e.g. the contents of a file.
@@ -109,15 +109,15 @@
branch::
A non-cyclical graph of revisions, i.e. the complete history of
a particular revision, which is called the branch head. The
- branch heads are stored in $GIT_DIR/refs/heads/.
+ branch heads are stored in `$GIT_DIR/refs/heads/`.
ref::
A 40-byte hex representation of a SHA1 pointing to a particular
- object. These may be stored in $GIT_DIR/refs/.
+ object. These may be stored in `$GIT_DIR/refs/`.
head ref::
A ref pointing to a head. Often, this is abbreviated to "head".
- Head refs are stored in $GIT_DIR/refs/heads/.
+ Head refs are stored in `$GIT_DIR/refs/heads/`.
tree-ish::
A ref pointing to either a commit object, a tree object, or a
@@ -125,7 +125,7 @@
ent::
Favorite synonym to "tree-ish" by some total geeks. See
- http://en.wikipedia.org/wiki/Ent_(Middle-earth) for an in-depth
+ `http://en.wikipedia.org/wiki/Ent_(Middle-earth)` for an in-depth
explanation.
tag object::
@@ -137,7 +137,7 @@
tag::
A ref pointing to a tag or commit object. In contrast to a head,
a tag is not changed by a commit. Tags (not tag objects) are
- stored in $GIT_DIR/refs/tags/. A git tag has nothing to do with
+ stored in `$GIT_DIR/refs/tags/`. A git tag has nothing to do with
a Lisp tag (which is called object type in git's context).
A tag is most typically used to mark a particular point in the
commit ancestry chain.
diff --git a/Documentation/howto/update-hook-example.txt b/Documentation/howto/update-hook-example.txt
index dacaf17..3a33696 100644
--- a/Documentation/howto/update-hook-example.txt
+++ b/Documentation/howto/update-hook-example.txt
@@ -1,4 +1,4 @@
-From: Junio C Hamano <junkio@cox.net>
+From: Junio C Hamano <junkio@cox.net> and Carl Baldwin <cnb@fc.hp.com>
Subject: control access to branches.
Date: Thu, 17 Nov 2005 23:55:32 -0800
Message-ID: <7vfypumlu3.fsf@assigned-by-dhcp.cox.net>
@@ -26,63 +26,137 @@
So if your policy is (1) always require fast-forward push
(i.e. never allow "git-push repo +branch:branch"), (2) you
have a list of users allowed to update each branch, and (3) you
-do not let tags to be overwritten, then:
+do not let tags to be overwritten, then you can use something
+like this as your hooks/update script.
- #!/bin/sh
- # This is a sample hooks/update script, written by JC
- # in his e-mail buffer, so naturally it is not tested
- # but hopefully would convey the idea.
+[jc: editorial note. This is a much improved version by Carl
+since I posted the original outline]
- umask 002
- case "$1" in
- refs/tags/*)
- # No overwriting an existing tag
- if test -f "$GIT_DIR/$1"
- then
- exit 1
- fi
- ;;
- refs/heads/*)
- # No rebasing or rewinding
- if expr "$2" : '0*$' >/dev/null
- then
- # creating a new branch
- ;
- else
- # updating -- make sure it is a fast forward
- mb=`git-merge-base "$2" "$3"`
- case "$mb,$2" in
- "$2,$mb")
- ;; # fast forward -- happy
- *)
- exit 1 ;; # unhappy
- esac
- fi
- ;;
- *)
- # No funny refs allowed
- exit 1
- ;;
- esac
+-- >8 -- beginning of script -- >8 --
- # Is the user allowed to update it?
- me=`id -u -n` ;# e.g. "junio"
- while read head_pattern users
- do
- if expr "$1" : "$head_pattern" >/dev/null
- then
- case " $users " in
- *" $me "*)
- exit 0 ;; # happy
- ' * ')
- exit 0 ;; # anybody
- esac
- fi
- done
- exit 1
+#!/bin/bash
-For the sake of simplicity, I assumed that you keep something
-like this in $GIT_DIR/info/allowed-pushers file:
+umask 002
+
+# If you are having trouble with this access control hook script
+# you can try setting this to true. It will tell you exactly
+# why a user is being allowed/denied access.
+
+verbose=false
+
+# Default shell globbing messes things up downstream
+GLOBIGNORE=*
+
+function grant {
+ $verbose && echo >&2 "-Grant- $1"
+ echo grant
+ exit 0
+}
+
+function deny {
+ $verbose && echo >&2 "-Deny- $1"
+ echo deny
+ exit 1
+}
+
+function info {
+ $verbose && echo >&2 "-Info- $1"
+}
+
+# Implement generic branch and tag policies.
+# - Tags should not be updated once created.
+# - Branches should only be fast-forwarded.
+case "$1" in
+ refs/tags/*)
+ [ -f "$GIT_DIR/$1" ] &&
+ deny >/dev/null "You can't overwrite an existing tag"
+ ;;
+ refs/heads/*)
+ # No rebasing or rewinding
+ if expr "$2" : '0*$' >/dev/null; then
+ info "The branch '$1' is new..."
+ else
+ # updating -- make sure it is a fast forward
+ mb=$(git-merge-base "$2" "$3")
+ case "$mb,$2" in
+ "$2,$mb") info "Update is fast-forward" ;;
+ *) deny >/dev/null "This is not a fast-forward update." ;;
+ esac
+ fi
+ ;;
+ *)
+ deny >/dev/null \
+ "Branch is not under refs/heads or refs/tags. What are you trying to do?"
+ ;;
+esac
+
+# Implement per-branch controls based on username
+allowed_users_file=$GIT_DIR/info/allowed-users
+username=$(id -u -n)
+info "The user is: '$username'"
+
+if [ -f "$allowed_users_file" ]; then
+ rc=$(cat $allowed_users_file | grep -v '^#' | grep -v '^$' |
+ while read head_pattern user_patterns; do
+ matchlen=$(expr "$1" : "$head_pattern")
+ if [ "$matchlen" == "${#1}" ]; then
+ info "Found matching head pattern: '$head_pattern'"
+ for user_pattern in $user_patterns; do
+ info "Checking user: '$username' against pattern: '$user_pattern'"
+ matchlen=$(expr "$username" : "$user_pattern")
+ if [ "$matchlen" == "${#username}" ]; then
+ grant "Allowing user: '$username' with pattern: '$user_pattern'"
+ fi
+ done
+ deny "The user is not in the access list for this branch"
+ fi
+ done
+ )
+ case "$rc" in
+ grant) grant >/dev/null "Granting access based on $allowed_users_file" ;;
+ deny) deny >/dev/null "Denying access based on $allowed_users_file" ;;
+ *) ;;
+ esac
+fi
+
+allowed_groups_file=$GIT_DIR/info/allowed-groups
+groups=$(id -G -n)
+info "The user belongs to the following groups:"
+info "'$groups'"
+
+if [ -f "$allowed_groups_file" ]; then
+ rc=$(cat $allowed_groups_file | grep -v '^#' | grep -v '^$' |
+ while read head_pattern group_patterns; do
+ matchlen=$(expr "$1" : "$head_pattern")
+ if [ "$matchlen" == "${#1}" ]; then
+ info "Found matching head pattern: '$head_pattern'"
+ for group_pattern in $group_patterns; do
+ for groupname in $groups; do
+ info "Checking group: '$groupname' against pattern: '$group_pattern'"
+ matchlen=$(expr "$groupname" : "$group_pattern")
+ if [ "$matchlen" == "${#groupname}" ]; then
+ grant "Allowing group: '$groupname' with pattern: '$group_pattern'"
+ fi
+ done
+ done
+ deny "None of the user's groups are in the access list for this branch"
+ fi
+ done
+ )
+ case "$rc" in
+ grant) grant >/dev/null "Granting access based on $allowed_groups_file" ;;
+ deny) deny >/dev/null "Denying access based on $allowed_groups_file" ;;
+ *) ;;
+ esac
+fi
+
+deny >/dev/null "There are no more rules to check. Denying access"
+
+-- >8 -- end of script -- >8 --
+
+This uses two files, $GIT_DIR/info/allowed-users and
+allowed-groups, to describe which heads can be pushed into by
+whom. The format of each file would look like this:
refs/heads/master junio
refs/heads/cogito$ pasky
@@ -91,15 +165,8 @@
refs/tags/v[0-9]* junio
With this, Linus can push or create "bw/penguin" or "bw/zebra"
-or "bw/panda" branches, Pasky can do only "cogito", and I can do
-master branch and make versioned tags. And anybody can do
-tmp/blah branches. This assumes all the users are in a single
-group that can write into $GIT_DIR/ and underneath.
+or "bw/panda" branches, Pasky can do only "cogito", and JC can
+do master branch and make versioned tags. And anybody can do
+tmp/blah branches.
-
-
-
-
-
-
-
+------------
diff --git a/Documentation/merge-options.txt b/Documentation/merge-options.txt
index eebaf3a..53cc355 100644
--- a/Documentation/merge-options.txt
+++ b/Documentation/merge-options.txt
@@ -11,6 +11,6 @@
Use the given merge strategy; can be supplied more than
once to specify them in the order they should be tried.
If there is no `-s` option, a built-in list of strategies
- is used instead (`git-merge-resolve` when merging a single
+ is used instead (`git-merge-recursive` when merging a single
head, `git-merge-octopus` otherwise).
diff --git a/Documentation/merge-strategies.txt b/Documentation/merge-strategies.txt
index 3ec56d2..7df0266 100644
--- a/Documentation/merge-strategies.txt
+++ b/Documentation/merge-strategies.txt
@@ -6,27 +6,27 @@
and another branch you pulled from) using 3-way merge
algorithm. It tries to carefully detect criss-cross
merge ambiguities and is considered generally safe and
- fast. This is the default merge strategy when pulling
- one branch.
+ fast.
recursive::
This can only resolve two heads using 3-way merge
algorithm. When there are more than one common
ancestors that can be used for 3-way merge, it creates a
- merged tree of the common ancestores and uses that as
+ merged tree of the common ancestors and uses that as
the reference tree for the 3-way merge. This has been
reported to result in fewer merge conflicts without
causing mis-merges by tests done on actual merge commits
taken from Linux 2.6 kernel development history.
Additionally this can detect and handle merges involving
- renames.
+ renames. This is the default merge strategy when
+ pulling or merging one branch.
octopus::
This resolves more than two-head case, but refuses to do
complex merge that needs manual resolution. It is
primarily meant to be used for bundling topic branch
heads together. This is the default merge strategy when
- pulling more than one branch.
+ pulling or merging more than one branches.
ours::
This resolves any number of heads, but the result of the
diff --git a/Documentation/sort_glossary.pl b/Documentation/sort_glossary.pl
index babbea0..e57dc78 100644
--- a/Documentation/sort_glossary.pl
+++ b/Documentation/sort_glossary.pl
@@ -42,7 +42,6 @@
print 'GIT Glossary
============
-Aug 2005
This list is sorted alphabetically:
diff --git a/Documentation/tutorial.txt b/Documentation/tutorial.txt
index cf7ba76..0827056 100644
--- a/Documentation/tutorial.txt
+++ b/Documentation/tutorial.txt
@@ -1282,26 +1282,27 @@
`git-merge-one-file` script is called with parameters to
describe those three versions, and is responsible to leave the
-merge results in the working tree and register it in the index
-file. It is a fairly straightforward shell script, and
-eventually calls `merge` program from RCS suite to perform the
+merge results in the working tree.
+It is a fairly straightforward shell script, and
+eventually calls `merge` program from RCS suite to perform a
file-level 3-way merge. In this case, `merge` detects
conflicts, and the merge result with conflict marks is left in
-the working tree, while the index file is updated with the
-version from the current branch (this is to make `git diff`
-useful after this step). This can be seen if you run `ls-files
+the working tree.. This can be seen if you run `ls-files
--stage` again at this point:
------------
$ git-ls-files --stage
100644 7f8b141b65fdcee47321e399a2598a235a032422 0 example
-100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 0 hello
+100644 263414f423d0e4d70dae8fe53fa34614ff3e2860 1 hello
+100644 06fa6a24256dc7e560efa5687fa84b51f0263c3a 2 hello
+100644 cc44c73eb783565da5831b4d820c962954019b69 3 hello
------------
-As you can see, there is no unmerged paths in the index file.
This is the state of the index file and the working file after
`git merge` returns control back to you, leaving the conflicting
-merge for you to resolve.
+merge for you to resolve. Notice that the path `hello` is still
+unmerged, and what you see with `git diff` at this point is
+differences since stage 2 (i.e. your version).
Publishing your work
@@ -1636,14 +1637,49 @@
back before you push your work when it happens.
+Advanced Shared Repository Management
+-------------------------------------
+
+Being able to push into a shared repository means being able to
+write into it. If your developers are coming over the network,
+this means you, as the repository administrator, need to give
+each of them an SSH access to the shared repository machine.
+
+In some cases, though, you may not want to give a normal shell
+account to them, but want to restrict them to be able to only
+do `git push` into the repository and nothing else.
+
+You can achieve this by setting the login shell of your
+developers on the shared repository host to `git-shell` program.
+
+[NOTE]
+Most likely you would also need to list `git-shell` program in
+`/etc/shells` file.
+
+This restricts the set of commands that can be run from incoming
+SSH connection for these users to only `receive-pack` and
+`upload-pack`, so the only thing they can do are `git fetch` and
+`git push`.
+
+You still need to create UNIX user accounts for each developer,
+and put them in the same group. Make sure that the repository
+shared among these developers is writable by that group.
+
+You can implement finer grained branch policies using update
+hooks. There is a document ("control access to branches") in
+Documentation/howto by Carl Baldwin and JC outlining how to (1)
+limit access to branch per user, (2) forbid overwriting existing
+tags.
+
+
Bundling your work together
---------------------------
It is likely that you will be working on more than one thing at
-a time. It is easy to use those more-or-less independent tasks
+a time. It is easy to manage those more-or-less independent tasks
using branches with git.
-We have already seen how branches work in a previous example,
+We have already seen how branches work previously,
with "fun and work" example using two branches. The idea is the
same if there are more than two branches. Let's say you started
out from "master" head, and have some new code in the "master"
diff --git a/INSTALL b/INSTALL
index 63ccf62..916ddd4 100644
--- a/INSTALL
+++ b/INSTALL
@@ -87,3 +87,6 @@
have all the libraries/tools needed, or you may have
necessary libraries at unusual locations. Please look at the
top of the Makefile to see what can be adjusted for your needs.
+ You can place local settings in config.mak and the Makefile
+ will include them. Note that config.mak is not distributed;
+ the name is reserved for local settings.
diff --git a/Makefile b/Makefile
index ba05986..8b433d1 100644
--- a/Makefile
+++ b/Makefile
@@ -55,7 +55,7 @@
# Define USE_STDEV below if you want git to care about the underlying device
# change being considered an inode change from the update-cache perspective.
-GIT_VERSION = 0.99.9l
+GIT_VERSION = 0.99.9m
# CFLAGS and LDFLAGS are for the users to override from the command line.
@@ -162,7 +162,7 @@
LIB_H = \
blob.h cache.h commit.h count-delta.h csum-file.h delta.h \
diff.h epoch.h object.h pack.h pkt-line.h quote.h refs.h \
- run-command.h strbuf.h tag.h tree.h
+ run-command.h strbuf.h tag.h tree.h git-compat-util.h
DIFF_OBJS = \
diff.o diffcore-break.o diffcore-order.o diffcore-pathspec.o \
@@ -243,6 +243,10 @@
ALL_CFLAGS += -I/usr/pkg/include
ALL_LDFLAGS += -L/usr/pkg/lib -Wl,-rpath,/usr/pkg/lib
endif
+ifeq ($(uname_S),AIX)
+ NO_STRCASESTR=YesPlease
+ NEEDS_LIBICONV=YesPlease
+endif
ifneq (,$(findstring arm,$(uname_M)))
ARM_SHA1 = YesPlease
endif
@@ -320,15 +324,15 @@
SIMPLE_LIB += -lnsl
endif
ifdef NO_STRCASESTR
- COMPAT_CFLAGS += -Dstrcasestr=gitstrcasestr -DNO_STRCASESTR=1
+ COMPAT_CFLAGS += -DNO_STRCASESTR
COMPAT_OBJS += compat/strcasestr.o
endif
ifdef NO_SETENV
- COMPAT_CFLAGS += -Dsetenv=gitsetenv -DNO_SETENV=1
+ COMPAT_CFLAGS += -DNO_SETENV
COMPAT_OBJS += compat/setenv.o
endif
ifdef NO_MMAP
- COMPAT_CFLAGS += -Dmmap=gitfakemmap -Dmunmap=gitfakemunmap -DNO_MMAP
+ COMPAT_CFLAGS += -DNO_MMAP
COMPAT_OBJS += compat/mmap.o
endif
ifdef NO_IPV6
@@ -363,9 +367,9 @@
all:
$(MAKE) -C templates
-git$(X): git.c $(COMPAT_OBJS) Makefile
+git$X: git.c $(LIB_FILE) Makefile
$(CC) -DGIT_EXEC_PATH='"$(bindir)"' -DGIT_VERSION='"$(GIT_VERSION)"' \
- $(CFLAGS) $(COMPAT_CFLAGS) -o $@ $(filter %.c,$^) $(filter %.o,$^)
+ $(CFLAGS) $(COMPAT_CFLAGS) -o $@ $(filter %.c,$^) $(LIB_FILE)
$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
rm -f $@
diff --git a/README b/README
index 36fef6e..cee7e43 100644
--- a/README
+++ b/README
@@ -35,7 +35,7 @@
objects). There are currently four different object types: "blob",
"tree", "commit" and "tag".
-A "blob" object cannot refer to any other object, and is, like the tag
+A "blob" object cannot refer to any other object, and is, like the type
implies, a pure storage object containing some user data. It is used to
actually store the file data, i.e. a blob object is associated with some
particular version of some file.
@@ -64,7 +64,7 @@
Regardless of object type, all objects share the following
characteristics: they are all deflated with zlib, and have a header
-that not only specifies their tag, but also provides size information
+that not only specifies their type, but also provides size information
about the data in the object. It's worth noting that the SHA1 hash
that is used to name the object is the hash of the original data
plus this header, so `sha1sum` 'file' does not match the object name
@@ -76,7 +76,7 @@
independently of the contents or the type of the object: all objects can
be validated by verifying that (a) their hashes match the content of the
file and (b) the object successfully inflates to a stream of bytes that
-forms a sequence of <ascii tag without space> + <space> + <ascii decimal
+forms a sequence of <ascii type without space> + <space> + <ascii decimal
size> + <byte\0> + <binary object data>.
The structured objects can further have their structure and
@@ -297,7 +297,7 @@
i.e. it will normally just update existing cache entries.
To tell git that yes, you really do realize that certain files no
-longer exist in the archive, or that new files should be added, you
+longer exist, or that new files should be added, you
should use the `--remove` and `--add` flags respectively.
NOTE! A `--remove` flag does 'not' mean that subsequent filenames will
@@ -515,8 +515,11 @@
Historical note. We did not have `-u` facility when this
section was first written, so we used to warn that
the merge is done in the index file, not in your
-working directory, and your working directory will no longer match your
-index.
+working tree, and your working tree will not match your
+index after this step.
+This is no longer true. The above command, thanks to `-u`
+option, updates your working tree with the merge results for
+paths that have been trivially merged.
8) Merging multiple trees, continued
@@ -579,7 +582,7 @@
to help you understand what conceptually happens under the hood.
In practice, nobody, not even git itself, uses three `git-cat-file`
for this. There is `git-merge-index` program that extracts the
-stages to temporary files and calls a `merge` script on it
+stages to temporary files and calls a "merge" script on it:
git-merge-index git-merge-one-file hello.c
diff --git a/cache.h b/cache.h
index f9b367f..c78d8ae 100644
--- a/cache.h
+++ b/cache.h
@@ -1,23 +1,7 @@
#ifndef CACHE_H
#define CACHE_H
-#include <unistd.h>
-#include <stdio.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stddef.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <errno.h>
-#include <limits.h>
-#ifndef NO_MMAP
-#include <sys/mman.h>
-#endif
-#include <sys/param.h>
-#include <netinet/in.h>
-#include <sys/types.h>
-#include <dirent.h>
+#include "git-compat-util.h"
#include SHA1_HEADER
#include <zlib.h>
@@ -36,15 +20,6 @@
#define DTYPE(de) DT_UNKNOWN
#endif
-#ifdef __GNUC__
-#define NORETURN __attribute__((__noreturn__))
-#else
-#define NORETURN
-#ifndef __attribute__
-#define __attribute__(x)
-#endif
-#endif
-
/*
* Intensive research over the course of many years has shown that
* port 9418 is totally unused by anything else. Or
@@ -169,6 +144,7 @@
extern int ce_modified(struct cache_entry *ce, struct stat *st);
extern int ce_path_match(const struct cache_entry *ce, const char **pathspec);
extern int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object, const char *type);
+extern int index_pipe(unsigned char *sha1, int fd, const char *type, int write_object);
extern int index_path(unsigned char *sha1, const char *path, struct stat *st, int write_object);
extern void fill_stat_cache_info(struct cache_entry *ce, struct stat *st);
@@ -250,11 +226,6 @@
extern int create_symref(const char *git_HEAD, const char *refs_heads_master);
extern int validate_symref(const char *git_HEAD);
-/* General helper functions */
-extern void usage(const char *err) NORETURN;
-extern void die(const char *err, ...) NORETURN __attribute__((format (printf, 1, 2)));
-extern int error(const char *err, ...) __attribute__((format (printf, 1, 2)));
-
extern int base_name_compare(const char *name1, int len1, int mode1, const char *name2, int len2, int mode2);
extern int cache_name_compare(const char *name1, int len1, const char *name2, int len2);
@@ -272,30 +243,6 @@
extern const char *git_author_info(void);
extern const char *git_committer_info(void);
-static inline void *xmalloc(size_t size)
-{
- void *ret = malloc(size);
- if (!ret)
- die("Out of memory, malloc failed");
- return ret;
-}
-
-static inline void *xrealloc(void *ptr, size_t size)
-{
- void *ret = realloc(ptr, size);
- if (!ret)
- die("Out of memory, realloc failed");
- return ret;
-}
-
-static inline void *xcalloc(size_t nmemb, size_t size)
-{
- void *ret = calloc(nmemb, size);
- if (!ret)
- die("Out of memory, calloc failed");
- return ret;
-}
-
struct checkout {
const char *base_dir;
int base_dir_len;
@@ -373,20 +320,6 @@
/* Dumb servers support */
extern int update_server_info(int);
-#ifdef NO_MMAP
-
-#ifndef PROT_READ
-#define PROT_READ 1
-#define PROT_WRITE 2
-#define MAP_PRIVATE 1
-#define MAP_FAILED ((void*)-1)
-#endif
-
-extern void *gitfakemmap(void *start, size_t length, int prot , int flags, int fd, off_t offset);
-extern int gitfakemunmap(void *start, size_t length);
-
-#endif
-
typedef int (*config_fn_t)(const char *, const char *);
extern int git_default_config(const char *, const char *);
extern int git_config_from_file(config_fn_t fn, const char *);
@@ -404,31 +337,5 @@
#define MAX_ENCODING_LENGTH 64
extern char git_commit_encoding[MAX_ENCODING_LENGTH];
-/* Sane ctype - no locale, and works with signed chars */
-#undef isspace
-#undef isdigit
-#undef isalpha
-#undef isalnum
-#undef tolower
-#undef toupper
-extern unsigned char sane_ctype[256];
-#define GIT_SPACE 0x01
-#define GIT_DIGIT 0x02
-#define GIT_ALPHA 0x04
-#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
-#define isspace(x) sane_istest(x,GIT_SPACE)
-#define isdigit(x) sane_istest(x,GIT_DIGIT)
-#define isalpha(x) sane_istest(x,GIT_ALPHA)
-#define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT)
-#define tolower(x) sane_case((unsigned char)(x), 0x20)
-#define toupper(x) sane_case((unsigned char)(x), 0)
-
-static inline int sane_case(int x, int high)
-{
- if (sane_istest(x, GIT_ALPHA))
- x = (x & ~0x20) | high;
- return x;
-}
-
extern int copy_fd(int ifd, int ofd);
#endif /* CACHE_H */
diff --git a/checkout-index.c b/checkout-index.c
index f1e716d..1e1c972 100644
--- a/checkout-index.c
+++ b/checkout-index.c
@@ -36,6 +36,7 @@
static const char *prefix;
static int prefix_length;
+static int checkout_stage; /* default to checkout stage0 */
static struct checkout state = {
.base_dir = "",
@@ -48,20 +49,36 @@
static int checkout_file(const char *name)
{
- int pos = cache_name_pos(name, strlen(name));
- if (pos < 0) {
- if (!state.quiet) {
- pos = -pos - 1;
- fprintf(stderr,
- "git-checkout-index: %s is %s.\n",
- name,
- (pos < active_nr &&
- !strcmp(active_cache[pos]->name, name)) ?
- "unmerged" : "not in the cache");
- }
- return -1;
+ int namelen = strlen(name);
+ int pos = cache_name_pos(name, namelen);
+ int has_same_name = 0;
+
+ if (pos < 0)
+ pos = -pos - 1;
+
+ while (pos < active_nr) {
+ struct cache_entry *ce = active_cache[pos];
+ if (ce_namelen(ce) != namelen &&
+ memcmp(ce->name, name, namelen))
+ break;
+ has_same_name = 1;
+ if (checkout_stage == ce_stage(ce))
+ return checkout_entry(ce, &state);
+ pos++;
}
- return checkout_entry(active_cache[pos], &state);
+
+ if (!state.quiet) {
+ fprintf(stderr, "git-checkout-index: %s ", name);
+ if (!has_same_name)
+ fprintf(stderr, "is not in the cache");
+ else if (checkout_stage)
+ fprintf(stderr, "does not exist at stage %d",
+ checkout_stage);
+ else
+ fprintf(stderr, "is unmerged");
+ fputc('\n', stderr);
+ }
+ return -1;
}
static int checkout_all(void)
@@ -70,11 +87,11 @@
for (i = 0; i < active_nr ; i++) {
struct cache_entry *ce = active_cache[i];
- if (ce_stage(ce))
+ if (ce_stage(ce) != checkout_stage)
continue;
if (prefix && *prefix &&
- ( ce_namelen(ce) <= prefix_length ||
- memcmp(prefix, ce->name, prefix_length) ))
+ (ce_namelen(ce) <= prefix_length ||
+ memcmp(prefix, ce->name, prefix_length)))
continue;
if (checkout_entry(ce, &state) < 0)
errs++;
@@ -88,7 +105,7 @@
}
static const char checkout_cache_usage[] =
-"git-checkout-index [-u] [-q] [-a] [-f] [-n] [--prefix=<string>] [--] <file>...";
+"git-checkout-index [-u] [-q] [-a] [-f] [-n] [--stage=[123]] [--prefix=<string>] [--] <file>...";
static struct cache_file cache_file;
@@ -138,11 +155,19 @@
die("cannot open index.lock file.");
continue;
}
- if (!memcmp(arg, "--prefix=", 9)) {
+ if (!strncmp(arg, "--prefix=", 9)) {
state.base_dir = arg+9;
state.base_dir_len = strlen(state.base_dir);
continue;
}
+ if (!strncmp(arg, "--stage=", 8)) {
+ int ch = arg[8];
+ if ('1' <= ch && ch <= '3')
+ checkout_stage = arg[8] - '0';
+ else
+ die("stage should be between 1 and 3");
+ continue;
+ }
if (arg[0] == '-')
usage(checkout_cache_usage);
break;
diff --git a/compat/mmap.c b/compat/mmap.c
index a051c47..55cb120 100644
--- a/compat/mmap.c
+++ b/compat/mmap.c
@@ -2,7 +2,7 @@
#include <stdlib.h>
#include <unistd.h>
#include <errno.h>
-#include "../cache.h"
+#include "../git-compat-util.h"
void *gitfakemmap(void *start, size_t length, int prot , int flags, int fd, off_t offset)
{
diff --git a/compat/setenv.c b/compat/setenv.c
index 94acd2d..b7d7678 100644
--- a/compat/setenv.c
+++ b/compat/setenv.c
@@ -16,7 +16,7 @@
namelen = strlen(name);
valuelen = strlen(value);
- envstr = malloc((namelen + valuelen + 2) * sizeof(char));
+ envstr = malloc((namelen + valuelen + 2));
if (!envstr) return -1;
memcpy(envstr, name, namelen);
@@ -25,7 +25,11 @@
envstr[namelen + valuelen + 1] = 0;
out = putenv(envstr);
+ /* putenv(3) makes the argument string part of the environment,
+ * and changing that string modifies the environment --- which
+ * means we do not own that storage anymore. Do not free
+ * envstr.
+ */
- free(envstr);
return out;
}
diff --git a/compat/strcasestr.c b/compat/strcasestr.c
index b96414d..26896de 100644
--- a/compat/strcasestr.c
+++ b/compat/strcasestr.c
@@ -1,5 +1,4 @@
-#include <string.h>
-#include <ctype.h>
+#include "../git-compat-util.h"
char *gitstrcasestr(const char *haystack, const char *needle)
{
diff --git a/config.c b/config.c
index 34584f6..5b5a9a2 100644
--- a/config.c
+++ b/config.c
@@ -458,12 +458,6 @@
* If .git/config does not exist yet, write a minimal version.
*/
if (stat(config_filename, &st)) {
- static const char contents[] =
- "#\n"
- "# This is the config file\n"
- "#\n"
- "\n";
-
free(store.key);
/* if nothing to unset, error out */
@@ -474,8 +468,6 @@
}
store.key = (char*)key;
-
- write(fd, contents, sizeof(contents)-1);
store_write_section(fd, key);
store_write_pair(fd, key, value);
} else{
diff --git a/convert-objects.c b/convert-objects.c
index d78a8b4..b49bce2 100644
--- a/convert-objects.c
+++ b/convert-objects.c
@@ -1,4 +1,5 @@
-#define _XOPEN_SOURCE /* glibc2 needs this */
+#define _XOPEN_SOURCE 500 /* glibc2 and AIX 5.3L need this */
+#define _XOPEN_SOURCE_EXTENDED 1 /* AIX 5.3L needs this */
#include <time.h>
#include "cache.h"
diff --git a/debian/changelog b/debian/changelog
index 7e5d1ac..3a98210 100644
--- a/debian/changelog
+++ b/debian/changelog
@@ -1,3 +1,9 @@
+git-core (0.99.9m-0) unstable; urgency=low
+
+ * GIT 0.99.9m aka 1.0rc5
+
+ -- Junio C Hamano <junkio@cox.net> Sun, 11 Dec 2005 16:48:06 -0800
+
git-core (0.99.9l-0) unstable; urgency=low
* GIT 0.99.9l aka 1.0rc4
diff --git a/git-am.sh b/git-am.sh
index 660b3a4..6ed527c 100755
--- a/git-am.sh
+++ b/git-am.sh
@@ -312,7 +312,7 @@
echo "--------------------------"
cat "$dotest/final-commit"
echo "--------------------------"
- echo -n "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
+ printf "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all "
read reply
case "$reply" in
[yY]*) action=yes ;;
diff --git a/git-applypatch.sh b/git-applypatch.sh
index 4c577eb..a112e1a 100755
--- a/git-applypatch.sh
+++ b/git-applypatch.sh
@@ -83,7 +83,7 @@
echo "--------------------------"
cat "$final"
echo "--------------------------"
- echo -n "Apply? [y]es/[n]o/[e]dit/[a]ccept all "
+ printf "Apply? [y]es/[n]o/[e]dit/[a]ccept all "
read reply
case "$reply" in
y|Y) interactive=no;;
diff --git a/git-archimport.perl b/git-archimport.perl
index c3bed08..aab4e38 100755
--- a/git-archimport.perl
+++ b/git-archimport.perl
@@ -25,6 +25,9 @@
- audit shell-escaping of filenames
- hide our private tags somewhere smarter
- find a way to make "cat *patches | patch" safe even when patchfiles are missing newlines
+ - sort and apply patches by graphing ancestry relations instead of just
+ relying in dates supplied in the changeset itself.
+ tla ancestry-graph -m could be helpful here...
=head1 Devel tricks
@@ -53,15 +56,9 @@
use strict;
use warnings;
use Getopt::Std;
-use File::Spec;
-use File::Temp qw(tempfile tempdir);
-use File::Path qw(mkpath);
+use File::Temp qw(tempdir);
+use File::Path qw(mkpath rmtree);
use File::Basename qw(basename dirname);
-use String::ShellQuote;
-use Time::Local;
-use IO::Socket;
-use IO::Pipe;
-use POSIX qw(strftime dup2);
use Data::Dumper qw/ Dumper /;
use IPC::Open2;
@@ -72,124 +69,150 @@
$ENV{"GIT_DIR"} = $git_dir;
my $ptag_dir = "$git_dir/archimport/tags";
-our($opt_h,$opt_v, $opt_T,$opt_t,$opt_o);
+our($opt_h,$opt_f,$opt_v,$opt_T,$opt_t,$opt_D,$opt_a,$opt_o);
sub usage() {
print STDERR <<END;
Usage: ${\basename $0} # fetch/update GIT from Arch
- [ -o ] [ -h ] [ -v ] [ -T ] [ -t tempdir ]
+ [ -f ] [ -o ] [ -h ] [ -v ] [ -T ] [ -a ] [ -D depth ] [ -t tempdir ]
repository/arch-branch [ repository/arch-branch] ...
END
exit(1);
}
-getopts("Thvt:") or usage();
+getopts("fThvat:D:") or usage();
usage if $opt_h;
@ARGV >= 1 or usage();
-my @arch_roots = @ARGV;
+# $arch_branches:
+# values associated with keys:
+# =1 - Arch version / git 'branch' detected via abrowse on a limit
+# >1 - Arch version / git 'branch' of an auxilliary branch we've merged
+my %arch_branches = map { $_ => 1 } @ARGV;
-my ($tmpdir, $tmpdirname) = tempdir('git-archimport-XXXXXX', TMPDIR => 1, CLEANUP => 1);
-my $tmp = $opt_t || 1;
-$tmp = tempdir('git-archimport-XXXXXX', TMPDIR => 1, CLEANUP => 1);
+$ENV{'TMPDIR'} = $opt_t if $opt_t; # $ENV{TMPDIR} will affect tempdir() calls:
+my $tmp = tempdir('git-archimport-XXXXXX', TMPDIR => 1, CLEANUP => 1);
$opt_v && print "+ Using $tmp as temporary directory\n";
+my %reachable = (); # Arch repositories we can access
+my %unreachable = (); # Arch repositories we can't access :<
my @psets = (); # the collection
my %psets = (); # the collection, by name
+my %stats = ( # Track which strategy we used to import:
+ get_tag => 0, replay => 0, get_new => 0, get_delta => 0,
+ simple_changeset => 0, import_or_tag => 0
+);
my %rptags = (); # my reverse private tags
# to map a SHA1 to a commitid
+my $TLA = $ENV{'ARCH_CLIENT'} || 'tla';
-foreach my $root (@arch_roots) {
- my ($arepo, $abranch) = split(m!/!, $root);
- open ABROWSE, "tla abrowse -f -A $arepo --desc --merges $abranch |"
- or die "Problems with tla abrowse: $!";
-
- my %ps = (); # the current one
- my $mode = '';
- my $lastseen = '';
-
- while (<ABROWSE>) {
- chomp;
+sub do_abrowse {
+ my $stage = shift;
+ while (my ($limit, $level) = each %arch_branches) {
+ next unless $level == $stage;
- # first record padded w 8 spaces
- if (s/^\s{8}\b//) {
+ open ABROWSE, "$TLA abrowse -fkD --merges $limit |"
+ or die "Problems with tla abrowse: $!";
+
+ my %ps = (); # the current one
+ my $lastseen = '';
+
+ while (<ABROWSE>) {
+ chomp;
- # store the record we just captured
- if (%ps) {
- my %temp = %ps; # break references
- push (@psets, \%temp);
- $psets{$temp{id}} = \%temp;
- %ps = ();
- }
-
- my ($id, $type) = split(m/\s{3}/, $_);
- $ps{id} = $id;
- $ps{repo} = $arepo;
+ # first record padded w 8 spaces
+ if (s/^\s{8}\b//) {
+ my ($id, $type) = split(m/\s+/, $_, 2);
- # deal with types
- if ($type =~ m/^\(simple changeset\)/) {
- $ps{type} = 's';
- } elsif ($type eq '(initial import)') {
- $ps{type} = 'i';
- } elsif ($type =~ m/^\(tag revision of (.+)\)/) {
- $ps{type} = 't';
- $ps{tag} = $1;
- } else {
- warn "Unknown type $type";
- }
- $lastseen = 'id';
- }
-
- if (s/^\s{10}//) {
- # 10 leading spaces or more
- # indicate commit metadata
-
- # date & author
- if ($lastseen eq 'id' && m/^\d{4}-\d{2}-\d{2}/) {
-
- my ($date, $authoremail) = split(m/\s{2,}/, $_);
- $ps{date} = $date;
- $ps{date} =~ s/\bGMT$//; # strip off trailign GMT
- if ($ps{date} =~ m/\b\w+$/) {
- warn 'Arch dates not in GMT?! - imported dates will be wrong';
+ my %last_ps;
+ # store the record we just captured
+ if (%ps && !exists $psets{ $ps{id} }) {
+ %last_ps = %ps; # break references
+ push (@psets, \%last_ps);
+ $psets{ $last_ps{id} } = \%last_ps;
}
-
- $authoremail =~ m/^(.+)\s(\S+)$/;
- $ps{author} = $1;
- $ps{email} = $2;
-
- $lastseen = 'date';
-
- } elsif ($lastseen eq 'date') {
- # the only hint is position
- # subject is after date
- $ps{subj} = $_;
- $lastseen = 'subj';
-
- } elsif ($lastseen eq 'subj' && $_ eq 'merges in:') {
- $ps{merges} = [];
- $lastseen = 'merges';
-
- } elsif ($lastseen eq 'merges' && s/^\s{2}//) {
- push (@{$ps{merges}}, $_);
- } else {
- warn 'more metadata after merges!?';
- }
-
- }
- }
+
+ my $branch = extract_versionname($id);
+ %ps = ( id => $id, branch => $branch );
+ if (%last_ps && ($last_ps{branch} eq $branch)) {
+ $ps{parent_id} = $last_ps{id};
+ }
+
+ $arch_branches{$branch} = 1;
+ $lastseen = 'id';
- if (%ps) {
- my %temp = %ps; # break references
- push (@psets, \%temp);
- $psets{ $temp{id} } = \%temp;
- %ps = ();
- }
- close ABROWSE;
+ # deal with types (should work with baz or tla):
+ if ($type =~ m/\(.*changeset\)/) {
+ $ps{type} = 's';
+ } elsif ($type =~ /\(.*import\)/) {
+ $ps{type} = 'i';
+ } elsif ($type =~ m/\(tag.*?(\S+\@\S+).*?\)/) {
+ $ps{type} = 't';
+ # read which revision we've tagged when we parse the log
+ $ps{tag} = $1;
+ } else {
+ warn "Unknown type $type";
+ }
+
+ $arch_branches{$branch} = 1;
+ $lastseen = 'id';
+ } elsif (s/^\s{10}//) {
+ # 10 leading spaces or more
+ # indicate commit metadata
+
+ # date
+ if ($lastseen eq 'id' && m/^(\d{4}-\d\d-\d\d \d\d:\d\d:\d\d)/){
+ $ps{date} = $1;
+ $lastseen = 'date';
+ } elsif ($_ eq 'merges in:') {
+ $ps{merges} = [];
+ $lastseen = 'merges';
+ } elsif ($lastseen eq 'merges' && s/^\s{2}//) {
+ my $id = $_;
+ push (@{$ps{merges}}, $id);
+
+ # aggressive branch finding:
+ if ($opt_D) {
+ my $branch = extract_versionname($id);
+ my $repo = extract_reponame($branch);
+
+ if (archive_reachable($repo) &&
+ !defined $arch_branches{$branch}) {
+ $arch_branches{$branch} = $stage + 1;
+ }
+ }
+ } else {
+ warn "more metadata after merges!?: $_\n" unless /^\s*$/;
+ }
+ }
+ }
+
+ if (%ps && !exists $psets{ $ps{id} }) {
+ my %temp = %ps; # break references
+ if (@psets && $psets[$#psets]{branch} eq $ps{branch}) {
+ $temp{parent_id} = $psets[$#psets]{id};
+ }
+ push (@psets, \%temp);
+ $psets{ $temp{id} } = \%temp;
+ }
+
+ close ABROWSE or die "$TLA abrowse failed on $limit\n";
+ }
} # end foreach $root
+do_abrowse(1);
+my $depth = 2;
+$opt_D ||= 0;
+while ($depth <= $opt_D) {
+ do_abrowse($depth);
+ $depth++;
+}
+
## Order patches by time
+# FIXME see if we can find a more optimal way to do this by graphing
+# the ancestry data and walking it, that way we won't have to rely on
+# client-supplied dates
@psets = sort {$a->{date}.$b->{id} cmp $b->{date}.$b->{id}} @psets;
#print Dumper \@psets;
@@ -210,7 +233,7 @@
}
} else { # progressing an import
# load the rptags
- opendir(DIR, "$git_dir/archimport/tags")
+ opendir(DIR, $ptag_dir)
|| die "can't opendir: $!";
while (my $file = readdir(DIR)) {
# skip non-interesting-files
@@ -272,29 +295,69 @@
*git_branchname = $opt_o ? *old_style_branchname : *tree_dirname;
-# process patchsets
-foreach my $ps (@psets) {
- $ps->{branch} = git_branchname($ps->{id});
+sub process_patchset_accurate {
+ my $ps = shift;
+
+ # switch to that branch if we're not already in that branch:
+ if (-e "$git_dir/refs/heads/$ps->{branch}") {
+ system('git-checkout','-f',$ps->{branch}) == 0 or die "$! $?\n";
- #
- # ensure we have a clean state
- #
- if (`git diff-files`) {
- die "Unclean tree when about to process $ps->{id} " .
- " - did we fail to commit cleanly before?";
+ # remove any old stuff that got leftover:
+ my $rm = safe_pipe_capture('git-ls-files','--others','-z');
+ rmtree(split(/\0/,$rm)) if $rm;
}
- die $! if $?;
+
+ # Apply the import/changeset/merge into the working tree
+ my $dir = sync_to_ps($ps);
+ # read the new log entry:
+ my @commitlog = safe_pipe_capture($TLA,'cat-log','-d',$dir,$ps->{id});
+ die "Error in cat-log: $!" if $?;
+ chomp @commitlog;
- #
- # skip commits already in repo
- #
- if (ptag($ps->{id})) {
- $opt_v && print " * Skipping already imported: $ps->{id}\n";
- next;
- }
+ # grab variables we want from the log, new fields get added to $ps:
+ # (author, date, email, summary, message body ...)
+ parselog($ps, \@commitlog);
- print " * Starting to work on $ps->{id}\n";
+ if ($ps->{id} =~ /--base-0$/ && $ps->{id} ne $psets[0]{id}) {
+ # this should work when importing continuations
+ if ($ps->{tag} && (my $branchpoint = eval { ptag($ps->{tag}) })) {
+
+ # find where we are supposed to branch from
+ system('git-checkout','-f','-b',$ps->{branch},
+ $branchpoint) == 0 or die "$! $?\n";
+
+ # remove any old stuff that got leftover:
+ my $rm = safe_pipe_capture('git-ls-files','--others','-z');
+ rmtree(split(/\0/,$rm)) if $rm;
+ # If we trust Arch with the fact that this is just
+ # a tag, and it does not affect the state of the tree
+ # then we just tag and move on
+ tag($ps->{id}, $branchpoint);
+ ptag($ps->{id}, $branchpoint);
+ print " * Tagged $ps->{id} at $branchpoint\n";
+ return 0;
+ } else {
+ warn "Tagging from unknown id unsupported\n" if $ps->{tag};
+ }
+ # allow multiple bases/imports here since Arch supports cherry-picks
+ # from unrelated trees
+ }
+
+ # update the index with all the changes we got
+ system('git-ls-files --others -z | '.
+ 'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
+ system('git-ls-files --deleted -z | '.
+ 'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
+ system('git-ls-files -z | '.
+ 'git-update-index -z --stdin') == 0 or die "$! $?\n";
+ return 1;
+}
+
+# the native changeset processing strategy. This is very fast, but
+# does not handle permissions or any renames involving directories
+sub process_patchset_fast {
+ my $ps = shift;
#
# create the branch if needed
#
@@ -305,7 +368,7 @@
unless ($import) { # skip for import
if ( -e "$git_dir/refs/heads/$ps->{branch}") {
# we know about this branch
- `git checkout $ps->{branch}`;
+ system('git-checkout',$ps->{branch});
} else {
# new branch! we need to verify a few things
die "Branch on a non-tag!" unless $ps->{type} eq 't';
@@ -314,7 +377,7 @@
unless $branchpoint;
# find where we are supposed to branch from
- `git checkout -b $ps->{branch} $branchpoint`;
+ system('git-checkout','-b',$ps->{branch},$branchpoint);
# If we trust Arch with the fact that this is just
# a tag, and it does not affect the state of the tree
@@ -322,7 +385,7 @@
tag($ps->{id}, $branchpoint);
ptag($ps->{id}, $branchpoint);
print " * Tagged $ps->{id} at $branchpoint\n";
- next;
+ return 0;
}
die $! if $?;
}
@@ -332,96 +395,128 @@
#
if ($ps->{type} eq 'i' || $ps->{type} eq 't') {
apply_import($ps) or die $!;
+ $stats{import_or_tag}++;
$import=0;
} elsif ($ps->{type} eq 's') {
apply_cset($ps);
+ $stats{simple_changeset}++;
}
#
# prepare update git's index, based on what arch knows
# about the pset, resolve parents, etc
#
- my $tree;
- my $commitlog = `tla cat-archive-log -A $ps->{repo} $ps->{id}`;
+ my @commitlog = safe_pipe_capture($TLA,'cat-archive-log',$ps->{id});
die "Error in cat-archive-log: $!" if $?;
- # parselog will git-add/rm files
- # and generally prepare things for the commit
- # NOTE: parselog will shell-quote filenames!
- my ($sum, $msg, $add, $del, $mod, $ren) = parselog($commitlog);
- my $logmessage = "$sum\n$msg";
-
+ parselog($ps,\@commitlog);
# imports don't give us good info
# on added files. Shame on them
- if ($ps->{type} eq 'i' || $ps->{type} eq 't') {
- `find . -type f -print0 | grep -zv '^./$git_dir' | xargs -0 -l100 git-update-index --add`;
- `git-ls-files --deleted -z | xargs --no-run-if-empty -0 -l100 git-update-index --remove`;
+ if ($ps->{type} eq 'i' || $ps->{type} eq 't') {
+ system('git-ls-files --others -z | '.
+ 'git-update-index --add -z --stdin') == 0 or die "$! $?\n";
+ system('git-ls-files --deleted -z | '.
+ 'git-update-index --remove -z --stdin') == 0 or die "$! $?\n";
}
- if (@$add) {
+ # TODO: handle removed_directories and renamed_directories:
+
+ if (my $add = $ps->{new_files}) {
while (@$add) {
my @slice = splice(@$add, 0, 100);
- my $slice = join(' ', @slice);
- `git-update-index --add $slice`;
- die "Error in git-update-index --add: $!" if $?;
+ system('git-update-index','--add','--',@slice) == 0 or
+ die "Error in git-update-index --add: $! $?\n";
}
}
- if (@$del) {
- foreach my $file (@$del) {
- unlink $file or die "Problems deleting $file : $!";
- }
+
+ if (my $del = $ps->{removed_files}) {
+ unlink @$del;
while (@$del) {
my @slice = splice(@$del, 0, 100);
- my $slice = join(' ', @slice);
- `git-update-index --remove $slice`;
- die "Error in git-update-index --remove: $!" if $?;
+ system('git-update-index','--remove','--',@slice) == 0 or
+ die "Error in git-update-index --remove: $! $?\n";
}
}
- if (@$ren) { # renamed
+
+ if (my $ren = $ps->{renamed_files}) { # renamed
if (@$ren % 2) {
die "Odd number of entries in rename!?";
}
- ;
+
while (@$ren) {
- my $from = pop @$ren;
- my $to = pop @$ren;
+ my $from = shift @$ren;
+ my $to = shift @$ren;
unless (-d dirname($to)) {
mkpath(dirname($to)); # will die on err
}
- #print "moving $from $to";
- `mv $from $to`;
- die "Error renaming $from $to : $!" if $?;
- `git-update-index --remove $from`;
- die "Error in git-update-index --remove: $!" if $?;
- `git-update-index --add $to`;
- die "Error in git-update-index --add: $!" if $?;
+ # print "moving $from $to";
+ rename($from, $to) or die "Error renaming '$from' '$to': $!\n";
+ system('git-update-index','--remove','--',$from) == 0 or
+ die "Error in git-update-index --remove: $! $?\n";
+ system('git-update-index','--add','--',$to) == 0 or
+ die "Error in git-update-index --add: $! $?\n";
}
-
}
- if (@$mod) { # must be _after_ renames
+
+ if (my $mod = $ps->{modified_files}) {
while (@$mod) {
my @slice = splice(@$mod, 0, 100);
- my $slice = join(' ', @slice);
- `git-update-index $slice`;
- die "Error in git-update-index: $!" if $?;
+ system('git-update-index','--',@slice) == 0 or
+ die "Error in git-update-index: $! $?\n";
}
}
+ return 1; # we successfully applied the changeset
+}
+
+if ($opt_f) {
+ print "Will import patchsets using the fast strategy\n",
+ "Renamed directories and permission changes will be missed\n";
+ *process_patchset = *process_patchset_fast;
+} else {
+ print "Using the default (accurate) import strategy.\n",
+ "Things may be a bit slow\n";
+ *process_patchset = *process_patchset_accurate;
+}
+
+foreach my $ps (@psets) {
+ # process patchsets
+ $ps->{branch} = git_branchname($ps->{id});
+
+ #
+ # ensure we have a clean state
+ #
+ if (my $dirty = `git-diff-files`) {
+ die "Unclean tree when about to process $ps->{id} " .
+ " - did we fail to commit cleanly before?\n$dirty";
+ }
+ die $! if $?;
+
+ #
+ # skip commits already in repo
+ #
+ if (ptag($ps->{id})) {
+ $opt_v && print " * Skipping already imported: $ps->{id}\n";
+ next;
+ }
+
+ print " * Starting to work on $ps->{id}\n";
+
+ process_patchset($ps) or next;
# warn "errors when running git-update-index! $!";
- $tree = `git-write-tree`;
+ my $tree = `git-write-tree`;
die "cannot write tree $!" if $?;
chomp $tree;
-
#
# Who's your daddy?
#
my @par;
if ( -e "$git_dir/refs/heads/$ps->{branch}") {
- if (open HEAD, "<$git_dir/refs/heads/$ps->{branch}") {
+ if (open HEAD, "<","$git_dir/refs/heads/$ps->{branch}") {
my $p = <HEAD>;
close HEAD;
chomp $p;
@@ -436,7 +531,6 @@
if ($ps->{merges}) {
push @par, find_parents($ps);
}
- my $par = join (' ', @par);
#
# Commit, tag and clean state
@@ -449,13 +543,14 @@
$ENV{GIT_COMMITTER_EMAIL} = $ps->{email};
$ENV{GIT_COMMITTER_DATE} = $ps->{date};
- my ($pid, $commit_rh, $commit_wh);
- $commit_rh = 'commit_rh';
- $commit_wh = 'commit_wh';
-
- $pid = open2(*READER, *WRITER, "git-commit-tree $tree $par")
+ my $pid = open2(*READER, *WRITER,'git-commit-tree',$tree,@par)
or die $!;
- print WRITER $logmessage; # write
+ print WRITER $ps->{summary},"\n";
+ print WRITER $ps->{message},"\n";
+
+ # make it easy to backtrack and figure out which Arch revision this was:
+ print WRITER 'git-archimport-id: ',$ps->{id},"\n";
+
close WRITER;
my $commitid = <READER>; # read
chomp $commitid;
@@ -468,7 +563,7 @@
#
# Update the branch
#
- open HEAD, ">$git_dir/refs/heads/$ps->{branch}";
+ open HEAD, ">","$git_dir/refs/heads/$ps->{branch}";
print HEAD $commitid;
close HEAD;
system('git-update-ref', 'HEAD', "$ps->{branch}");
@@ -482,21 +577,78 @@
print " + tree $tree\n";
print " + commit $commitid\n";
$opt_v && print " + commit date is $ps->{date} \n";
- $opt_v && print " + parents: $par \n";
+ $opt_v && print " + parents: ",join(' ',@par),"\n";
+}
+
+if ($opt_v) {
+ foreach (sort keys %stats) {
+ print" $_: $stats{$_}\n";
+ }
+}
+exit 0;
+
+# used by the accurate strategy:
+sub sync_to_ps {
+ my $ps = shift;
+ my $tree_dir = $tmp.'/'.tree_dirname($ps->{id});
+
+ $opt_v && print "sync_to_ps($ps->{id}) method: ";
+
+ if (-d $tree_dir) {
+ if ($ps->{type} eq 't') {
+ $opt_v && print "get (tag)\n";
+ # looks like a tag-only or (worse,) a mixed tags/changeset branch,
+ # can't rely on replay to work correctly on these
+ rmtree($tree_dir);
+ safe_pipe_capture($TLA,'get','--no-pristine',$ps->{id},$tree_dir);
+ $stats{get_tag}++;
+ } else {
+ my $tree_id = arch_tree_id($tree_dir);
+ if ($ps->{parent_id} && ($ps->{parent_id} eq $tree_id)) {
+ # the common case (hopefully)
+ $opt_v && print "replay\n";
+ safe_pipe_capture($TLA,'replay','-d',$tree_dir,$ps->{id});
+ $stats{replay}++;
+ } else {
+ # getting one tree is usually faster than getting two trees
+ # and applying the delta ...
+ rmtree($tree_dir);
+ $opt_v && print "apply-delta\n";
+ safe_pipe_capture($TLA,'get','--no-pristine',
+ $ps->{id},$tree_dir);
+ $stats{get_delta}++;
+ }
+ }
+ } else {
+ # new branch work
+ $opt_v && print "get (new tree)\n";
+ safe_pipe_capture($TLA,'get','--no-pristine',$ps->{id},$tree_dir);
+ $stats{get_new}++;
+ }
+
+ # added -I flag to rsync since we're going to fast! AIEEEEE!!!!
+ system('rsync','-aI','--delete','--exclude',$git_dir,
+# '--exclude','.arch-inventory',
+ '--exclude','.arch-ids','--exclude','{arch}',
+ '--exclude','+*','--exclude',',*',
+ "$tree_dir/",'./') == 0 or die "Cannot rsync $tree_dir: $! $?";
+ return $tree_dir;
}
sub apply_import {
my $ps = shift;
my $bname = git_branchname($ps->{id});
- `mkdir -p $tmp`;
+ mkpath($tmp);
- `tla get -s --no-pristine -A $ps->{repo} $ps->{id} $tmp/import`;
+ safe_pipe_capture($TLA,'get','-s','--no-pristine',$ps->{id},"$tmp/import");
die "Cannot get import: $!" if $?;
- `rsync -v --archive --delete --exclude '$git_dir' --exclude '.arch-ids' --exclude '{arch}' $tmp/import/* ./`;
+ system('rsync','-aI','--delete', '--exclude',$git_dir,
+ '--exclude','.arch-ids','--exclude','{arch}',
+ "$tmp/import/", './');
die "Cannot rsync import:$!" if $?;
- `rm -fr $tmp/import`;
+ rmtree("$tmp/import");
die "Cannot remove tempdir: $!" if $?;
@@ -506,10 +658,10 @@
sub apply_cset {
my $ps = shift;
- `mkdir -p $tmp`;
+ mkpath($tmp);
# get the changeset
- `tla get-changeset -A $ps->{repo} $ps->{id} $tmp/changeset`;
+ safe_pipe_capture($TLA,'get-changeset',$ps->{id},"$tmp/changeset");
die "Cannot get changeset: $!" if $?;
# apply patches
@@ -533,22 +685,27 @@
$orig =~ s/\.modified$//; # lazy
$orig =~ s!^\Q$tmp\E/changeset/patches/!!;
#print "rsync -p '$mod' '$orig'";
- `rsync -p $mod ./$orig`;
+ system('rsync','-p',$mod,"./$orig");
die "Problem applying binary changes! $!" if $?;
}
}
# bring in new files
- `rsync --archive --exclude '$git_dir' --exclude '.arch-ids' --exclude '{arch}' $tmp/changeset/new-files-archive/* ./`;
+ system('rsync','-aI','--exclude',$git_dir,
+ '--exclude','.arch-ids',
+ '--exclude', '{arch}',
+ "$tmp/changeset/new-files-archive/",'./');
# deleted files are hinted from the commitlog processing
- `rm -fr $tmp/changeset`;
+ rmtree("$tmp/changeset");
}
# =for reference
-# A log entry looks like
+# notes: *-files/-directories keys cannot have spaces, they're always
+# pika-escaped. Everything after the first newline
+# A log entry looks like:
# Revision: moodle-org--moodle--1.3.3--patch-15
# Archive: arch-eduforge@catalyst.net.nz--2004
# Creator: Penny Leach <penny@catalyst.net.nz>
@@ -566,70 +723,85 @@
# admin/editor.html backup/lib.php backup/restore.php
# New-patches: arch-eduforge@catalyst.net.nz--2004/moodle-org--moodle--1.3.3--patch-15
# Summary: Updating to latest from MOODLE_14_STABLE (1.4.5+)
+# summary can be multiline with a leading space just like the above fields
# Keywords:
#
# Updating yadda tadda tadda madda
sub parselog {
- my $log = shift;
- #print $log;
+ my ($ps, $log) = @_;
+ my $key = undef;
- my (@add, @del, @mod, @ren, @kw, $sum, $msg );
-
- if ($log =~ m/(?:\n|^)New-files:(.*?)(?=\n\w)/s ) {
- my $files = $1;
- @add = split(m/\s+/s, $files);
- }
-
- if ($log =~ m/(?:\n|^)Removed-files:(.*?)(?=\n\w)/s ) {
- my $files = $1;
- @del = split(m/\s+/s, $files);
- }
+ # headers we want that contain filenames:
+ my %want_headers = (
+ new_files => 1,
+ modified_files => 1,
+ renamed_files => 1,
+ renamed_directories => 1,
+ removed_files => 1,
+ removed_directories => 1,
+ );
- if ($log =~ m/(?:\n|^)Modified-files:(.*?)(?=\n\w)/s ) {
- my $files = $1;
- @mod = split(m/\s+/s, $files);
+ chomp (@$log);
+ while ($_ = shift @$log) {
+ if (/^Continuation-of:\s*(.*)/) {
+ $ps->{tag} = $1;
+ $key = undef;
+ } elsif (/^Summary:\s*(.*)$/ ) {
+ # summary can be multiline as long as it has a leading space
+ $ps->{summary} = [ $1 ];
+ $key = 'summary';
+ } elsif (/^Creator: (.*)\s*<([^\>]+)>/) {
+ $ps->{author} = $1;
+ $ps->{email} = $2;
+ $key = undef;
+ # any *-files or *-directories can be read here:
+ } elsif (/^([A-Z][a-z\-]+):\s*(.*)$/) {
+ my $val = $2;
+ $key = lc $1;
+ $key =~ tr/-/_/; # too lazy to quote :P
+ if ($want_headers{$key}) {
+ push @{$ps->{$key}}, split(/\s+/, $val);
+ } else {
+ $key = undef;
+ }
+ } elsif (/^$/) {
+ last; # remainder of @$log that didn't get shifted off is message
+ } elsif ($key) {
+ if (/^\s+(.*)$/) {
+ if ($key eq 'summary') {
+ push @{$ps->{$key}}, $1;
+ } else { # files/directories:
+ push @{$ps->{$key}}, split(/\s+/, $1);
+ }
+ } else {
+ $key = undef;
+ }
+ }
}
+
+ # post-processing:
+ $ps->{summary} = join("\n",@{$ps->{summary}})."\n";
+ $ps->{message} = join("\n",@$log);
- if ($log =~ m/(?:\n|^)Renamed-files:(.*?)(?=\n\w)/s ) {
- my $files = $1;
- @ren = split(m/\s+/s, $files);
- }
-
- $sum ='';
- if ($log =~ m/^Summary:(.+?)$/m ) {
- $sum = $1;
- $sum =~ s/^\s+//;
- $sum =~ s/\s+$//;
- }
-
- $msg = '';
- if ($log =~ m/\n\n(.+)$/s) {
- $msg = $1;
- $msg =~ s/^\s+//;
- $msg =~ s/\s+$//;
- }
-
-
- # cleanup the arrays
- foreach my $ref ( (\@add, \@del, \@mod, \@ren) ) {
+ # skip Arch control files, unescape pika-escaped files
+ foreach my $k (keys %want_headers) {
+ next unless (defined $ps->{$k});
my @tmp = ();
- while (my $t = pop @$ref) {
- next unless length ($t);
- next if $t =~ m!\{arch\}/!;
- next if $t =~ m!\.arch-ids/!;
- next if $t =~ m!\.arch-inventory$!;
+ foreach my $t (@{$ps->{$k}}) {
+ next unless length ($t);
+ next if $t =~ m!\{arch\}/!;
+ next if $t =~ m!\.arch-ids/!;
+ # should we skip this?
+ next if $t =~ m!\.arch-inventory$!;
# tla cat-archive-log will give us filenames with spaces as file\(sp)name - why?
# we can assume that any filename with \ indicates some pika escaping that we want to get rid of.
- if ($t =~ /\\/ ){
- $t = `tla escape --unescaped '$t'`;
+ if ($t =~ /\\/ ){
+ $t = (safe_pipe_capture($TLA,'escape','--unescaped',$t))[0];
}
- push (@tmp, shell_quote($t));
+ push @tmp, $t;
}
- @$ref = @tmp;
+ $ps->{$k} = \@tmp;
}
-
- #print Dumper [$sum, $msg, \@add, \@del, \@mod, \@ren];
- return ($sum, $msg, \@add, \@del, \@mod, \@ren);
}
# write/read a tag
@@ -826,8 +998,11 @@
}
}
}
- @parents = keys %parents;
- @parents = map { " -p " . ptag($_) } @parents;
+
+ @parents = ();
+ foreach (keys %parents) {
+ push @parents, '-p', ptag($_);
+ }
return @parents;
}
@@ -850,3 +1025,45 @@
|| (print Dumper(sort keys %psets)) && die "Cannot find patchset for $name";
return $ps;
}
+
+
+# an alterative to `command` that allows input to be passed as an array
+# to work around shell problems with weird characters in arguments
+sub safe_pipe_capture {
+ my @output;
+ if (my $pid = open my $child, '-|') {
+ @output = (<$child>);
+ close $child or die join(' ',@_).": $! $?";
+ } else {
+ exec(@_) or die "$! $?"; # exec() can fail the executable can't be found
+ }
+ return wantarray ? @output : join('',@output);
+}
+
+# `tla logs -rf -d <dir> | head -n1` or `baz tree-id <dir>`
+sub arch_tree_id {
+ my $dir = shift;
+ chomp( my $ret = (safe_pipe_capture($TLA,'logs','-rf','-d',$dir))[0] );
+ return $ret;
+}
+
+sub archive_reachable {
+ my $archive = shift;
+ return 1 if $reachable{$archive};
+ return 0 if $unreachable{$archive};
+
+ if (system "$TLA whereis-archive $archive >/dev/null") {
+ if ($opt_a && (system($TLA,'register-archive',
+ "http://mirrors.sourcecontrol.net/$archive") == 0)) {
+ $reachable{$archive} = 1;
+ return 1;
+ }
+ print STDERR "Archive is unreachable: $archive\n";
+ $unreachable{$archive} = 1;
+ return 0;
+ } else {
+ $reachable{$archive} = 1;
+ return 1;
+ }
+}
+
diff --git a/git-bisect.sh b/git-bisect.sh
index 68838f3..05dae8a 100755
--- a/git-bisect.sh
+++ b/git-bisect.sh
@@ -67,7 +67,7 @@
rm -rf "$GIT_DIR/refs/bisect/"
mkdir "$GIT_DIR/refs/bisect"
{
- echo -n "git-bisect start"
+ printf "git-bisect start"
sq "$@"
} >"$GIT_DIR/BISECT_LOG"
sq "$@" >"$GIT_DIR/BISECT_NAMES"
diff --git a/git-compat-util.h b/git-compat-util.h
new file mode 100644
index 0000000..4185b12
--- /dev/null
+++ b/git-compat-util.h
@@ -0,0 +1,113 @@
+#ifndef GIT_COMPAT_UTIL_H
+#define GIT_COMPAT_UTIL_H
+
+#include <unistd.h>
+#include <stdio.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <errno.h>
+#include <limits.h>
+#include <sys/param.h>
+#include <netinet/in.h>
+#include <sys/types.h>
+#include <dirent.h>
+
+#ifdef __GNUC__
+#define NORETURN __attribute__((__noreturn__))
+#else
+#define NORETURN
+#ifndef __attribute__
+#define __attribute__(x)
+#endif
+#endif
+
+/* General helper functions */
+extern void usage(const char *err) NORETURN;
+extern void die(const char *err, ...) NORETURN __attribute__((format (printf, 1, 2)));
+extern int error(const char *err, ...) __attribute__((format (printf, 1, 2)));
+
+#ifdef NO_MMAP
+
+#ifndef PROT_READ
+#define PROT_READ 1
+#define PROT_WRITE 2
+#define MAP_PRIVATE 1
+#define MAP_FAILED ((void*)-1)
+#endif
+
+#define mmap gitfakemmap
+#define munmap gitfakemunmap
+extern void *gitfakemmap(void *start, size_t length, int prot , int flags, int fd, off_t offset);
+extern int gitfakemunmap(void *start, size_t length);
+
+#else /* NO_MMAP */
+
+#include <sys/mman.h>
+
+#endif /* NO_MMAP */
+
+#ifdef NO_SETENV
+#define setenv gitsetenv
+extern int gitsetenv(const char *, const char *, int);
+#endif
+
+#ifdef NO_STRCASESTR
+#define strcasestr gitstrcasestr
+extern char *gitstrcasestr(const char *haystack, const char *needle);
+#endif
+
+static inline void *xmalloc(size_t size)
+{
+ void *ret = malloc(size);
+ if (!ret)
+ die("Out of memory, malloc failed");
+ return ret;
+}
+
+static inline void *xrealloc(void *ptr, size_t size)
+{
+ void *ret = realloc(ptr, size);
+ if (!ret)
+ die("Out of memory, realloc failed");
+ return ret;
+}
+
+static inline void *xcalloc(size_t nmemb, size_t size)
+{
+ void *ret = calloc(nmemb, size);
+ if (!ret)
+ die("Out of memory, calloc failed");
+ return ret;
+}
+
+/* Sane ctype - no locale, and works with signed chars */
+#undef isspace
+#undef isdigit
+#undef isalpha
+#undef isalnum
+#undef tolower
+#undef toupper
+extern unsigned char sane_ctype[256];
+#define GIT_SPACE 0x01
+#define GIT_DIGIT 0x02
+#define GIT_ALPHA 0x04
+#define sane_istest(x,mask) ((sane_ctype[(unsigned char)(x)] & (mask)) != 0)
+#define isspace(x) sane_istest(x,GIT_SPACE)
+#define isdigit(x) sane_istest(x,GIT_DIGIT)
+#define isalpha(x) sane_istest(x,GIT_ALPHA)
+#define isalnum(x) sane_istest(x,GIT_ALPHA | GIT_DIGIT)
+#define tolower(x) sane_case((unsigned char)(x), 0x20)
+#define toupper(x) sane_case((unsigned char)(x), 0)
+
+static inline int sane_case(int x, int high)
+{
+ if (sane_istest(x, GIT_ALPHA))
+ x = (x & ~0x20) | high;
+ return x;
+}
+
+#endif
diff --git a/git-format-patch.sh b/git-format-patch.sh
index 1eebe85..921feee 100755
--- a/git-format-patch.sh
+++ b/git-format-patch.sh
@@ -254,6 +254,15 @@
}
total=`wc -l <$series | tr -dc "[0-9]"`
+case "$total,$numbered" in
+1,*)
+ numfmt='' ;;
+*,t)
+ numfmt=`echo "$total" | wc -c`
+ numfmt=$(($numfmt-1))
+ numfmt=" %0${numfmt}d/$total"
+esac
+
i=1
while read commit
do
@@ -262,10 +271,7 @@
case "$numbered" in
'') num= ;;
*)
- case $total in
- 1) num= ;;
- *) num=' '`printf "%d/%d" $i $total` ;;
- esac
+ num=`printf "$numfmt" $i` ;;
esac
file=`printf '%04d-%stxt' $i "$title"`
diff --git a/git-merge-one-file.sh b/git-merge-one-file.sh
index eafef77..7dee88a 100755
--- a/git-merge-one-file.sh
+++ b/git-merge-one-file.sh
@@ -87,15 +87,16 @@
;;
esac
- # Create the working tree file, with the correct permission bits.
- # we can not rely on the fact that our tree has the path, because
- # we allow the merge to be done in an unchecked-out working tree.
- rm -f "$4" &&
- git-cat-file blob "$2" >"$4" &&
- case "$6" in *7??) chmod +x "$4" ;; esac &&
- merge "$4" "$orig" "$src2"
+ # Be careful for funny filename such as "-L" in "$4", which
+ # would confuse "merge" greatly.
+ src1=`git-unpack-file $2`
+ merge "$src1" "$orig" "$src2"
ret=$?
- rm -f -- "$orig" "$src2"
+
+ # Create the working tree file, using "our tree" version from the
+ # index, and then store the result of the merge.
+ git-checkout-index -f --stage=2 -- "$4" && cat "$src1" >"$4"
+ rm -f -- "$orig" "$src1" "$src2"
if [ "$6" != "$7" ]; then
echo "ERROR: Permissions conflict: $5->$6,$7."
diff --git a/git-merge-recursive.py b/git-merge-recursive.py
index b7fb096..f1320a6 100755
--- a/git-merge-recursive.py
+++ b/git-merge-recursive.py
@@ -280,6 +280,16 @@
runProgram(['git-update-index', '--add', '--cacheinfo',
'0%o' % mode, sha, path])
+def setIndexStages(path,
+ oSHA1, oMode,
+ aSHA1, aMode,
+ bSHA1, bMode):
+ runProgram(['git-update-index', '-z', '--index-info'],
+ input="0 " + ("0" * 40) + "\t" + path + "\0" + \
+ "%o %s %d\t%s\0" % (oMode, oSHA1, 1, path) + \
+ "%o %s %d\t%s\0" % (aMode, aSHA1, 2, path) + \
+ "%o %s %d\t%s\0" % (bMode, bSHA1, 3, path))
+
def removeFile(clean, path):
updateCache = cacheOnly or clean
updateWd = not cacheOnly
@@ -590,6 +600,8 @@
else:
dstName2 = ren1.dstName
+ # NEEDSWORK: place dstNameA at stage 2 and dstNameB at stage 3
+ # What about other stages???
updateFile(False, ren1.dstSha, ren1.dstMode, dstName1)
updateFile(False, ren2.dstSha, ren2.dstMode, dstName2)
else:
@@ -611,8 +623,11 @@
cleanMerge = False
if not cacheOnly:
- updateFileExt(ren1.dstSha, ren1.dstMode, ren1.dstName,
- updateCache=True, updateWd=False)
+ setIndexStages(ren1.dstName,
+ ren1.srcSha, ren1.srcMode,
+ ren1.dstSha, ren1.dstMode,
+ ren2.dstSha, ren2.dstMode)
+
updateFile(clean, resSha, resMode, ren1.dstName)
else:
# Renamed in 1, maybe changed in 2
@@ -672,11 +687,24 @@
tryMerge = True
if tryMerge:
+
+ oName, oSHA1, oMode = ren1.srcName, ren1.srcSha, ren1.srcMode
+ aName, bName = ren1.dstName, ren1.srcName
+ aSHA1, bSHA1 = ren1.dstSha, srcShaOtherBranch
+ aMode, bMode = ren1.dstMode, srcModeOtherBranch
+ aBranch, bBranch = branchName1, branchName2
+
+ if renamesA != renames1:
+ aName, bName = bName, aName
+ aSHA1, bSHA1 = bSHA1, aSHA1
+ aMode, bMode = bMode, aMode
+ aBranch, bBranch = bBranch, aBranch
+
[resSha, resMode, clean, merge] = \
- mergeFile(ren1.srcName, ren1.srcSha, ren1.srcMode,
- ren1.dstName, ren1.dstSha, ren1.dstMode,
- ren1.srcName, srcShaOtherBranch, srcModeOtherBranch,
- branchName1, branchName2)
+ mergeFile(oName, oSHA1, oMode,
+ aName, aSHA1, aMode,
+ bName, bSHA1, bMode,
+ aBranch, bBranch);
if merge or not clean:
output('Renaming', fmtRename(ren1.srcName, ren1.dstName))
@@ -690,8 +718,11 @@
cleanMerge = False
if not cacheOnly:
- updateFileExt(ren1.dstSha, ren1.dstMode, ren1.dstName,
- updateCache=True, updateWd=False)
+ setIndexStages(ren1.dstName,
+ oSHA1, oMode,
+ aSHA1, aMode,
+ bSHA1, bMode)
+
updateFile(clean, resSha, resMode, ren1.dstName)
return cleanMerge
diff --git a/git-mv.perl b/git-mv.perl
index b6c0b48..83dc7e4 100755
--- a/git-mv.perl
+++ b/git-mv.perl
@@ -62,7 +62,7 @@
my (%overwritten, %srcForDst);
$/ = "\0";
-open(F,"-|","git-ls-files","-z")
+open(F, 'git-ls-files -z |')
or die "Failed to open pipe from git-ls-files: " . $!;
@allfiles = map { chomp; $_; } <F>;
diff --git a/git-prune.sh b/git-prune.sh
index 1fd8c73..7e7f0ad 100755
--- a/git-prune.sh
+++ b/git-prune.sh
@@ -16,7 +16,11 @@
done
sync
-git-fsck-objects --full --cache --unreachable "$@" |
+case "$#" in
+0) git-fsck-objects --full --cache --unreachable ;;
+*) git-fsck-objects --full --cache --unreachable $(git-rev-parse --all) "$@" ;;
+esac |
+
sed -ne '/unreachable /{
s/unreachable [^ ][^ ]* //
s|\(..\)|\1/|p
diff --git a/git-revert.sh b/git-revert.sh
index c1aebb1..9d499c4 100755
--- a/git-revert.sh
+++ b/git-revert.sh
@@ -19,10 +19,10 @@
usage () {
case "$me" in
cherry-pick)
- die "usage git $me [-n] [-r] <commit-ish>"
+ die "usage git $me [--edit] [-n] [-r] <commit-ish>"
;;
revert)
- die "usage git $me [-n] <commit-ish>"
+ die "usage git $me [--edit | --no-edit] [-n] <commit-ish>"
;;
esac
}
@@ -38,7 +38,7 @@
-e|--e|--ed|--edi|--edit)
edit=-e
;;
- -n|--n|--no|--no-|--no-e|--no-ed|--no-edi|--no-edit)
+ --n|--no|--no-|--no-e|--no-ed|--no-edi|--no-edit)
edit=
;;
-r|--r|--re|--rep|--repl|--repla|--replay)
diff --git a/git-status.sh b/git-status.sh
index b90ffc1..2dda0c5 100755
--- a/git-status.sh
+++ b/git-status.sh
@@ -13,7 +13,7 @@
trailer=""
while read status name newname
do
- echo -n "$header"
+ printf '%s' "$header"
header=""
trailer="#
"
@@ -27,7 +27,7 @@
U ) echo "# unmerged: $name";;
esac
done
- echo -n "$trailer"
+ printf '%s' "$trailer"
[ "$header" ]
}
diff --git a/git.c b/git.c
index 619f25a..c26cac6 100644
--- a/git.c
+++ b/git.c
@@ -8,15 +8,12 @@
#include <errno.h>
#include <limits.h>
#include <stdarg.h>
+#include "git-compat-util.h"
#ifndef PATH_MAX
# define PATH_MAX 4096
#endif
-#ifdef NO_SETENV
-extern int gitsetenv(char *name, char *value, int overwrite);
-#endif
-
static const char git_usage[] =
"Usage: git [--version] [--exec-path[=GIT_EXEC_PATH]] [--help] COMMAND [ ARGS ]";
@@ -156,10 +153,10 @@
}
#ifdef __GNUC__
-static void usage(const char *exec_path, const char *fmt, ...)
+static void cmd_usage(const char *exec_path, const char *fmt, ...)
__attribute__((__format__(__printf__, 2, 3), __noreturn__));
#endif
-static void usage(const char *exec_path, const char *fmt, ...)
+static void cmd_usage(const char *exec_path, const char *fmt, ...)
{
if (fmt) {
va_list ap;
@@ -192,7 +189,6 @@
path_len = len + strlen(old_path) + 1;
path = malloc(path_len + 1);
- path[path_len + 1] = '\0';
memcpy(path, dir, len);
path[len] = ':';
@@ -255,12 +251,12 @@
else if (!strcmp(arg, "help"))
show_help = 1;
else if (!show_help)
- usage(NULL, NULL);
+ cmd_usage(NULL, NULL);
}
if (i >= argc || show_help) {
if (i >= argc)
- usage(exec_path, NULL);
+ cmd_usage(exec_path, NULL);
show_man_page(argv[i]);
}
@@ -290,7 +286,7 @@
len += snprintf(git_command + len, sizeof(git_command) - len,
"/git-%s", argv[i]);
if (sizeof(git_command) <= len) {
- fprintf(stderr, "git: command name given is too long (%d)\n", len);
+ fprintf(stderr, "git: command name given is too long.\n");
exit(1);
}
@@ -298,7 +294,7 @@
execve(git_command, &argv[i], envp);
if (errno == ENOENT)
- usage(exec_path, "'%s' is not a git-command", argv[i]);
+ cmd_usage(exec_path, "'%s' is not a git-command", argv[i]);
fprintf(stderr, "Failed to run command '%s': %s\n",
git_command, strerror(errno));
diff --git a/gitk b/gitk
index a847ef6..f12b3ce 100755
--- a/gitk
+++ b/gitk
@@ -16,22 +16,9 @@
}
}
-proc getcommits {rargs} {
- global commits commfd phase canv mainfont env
- global startmsecs nextupdate ncmupdate
- global ctext maincursor textcursor leftover gitencoding
+proc parse_args {rargs} {
+ global parsed_args
- # check that we can find a .git directory somewhere...
- set gitdir [gitdir]
- if {![file isdirectory $gitdir]} {
- error_popup "Cannot find the git directory \"$gitdir\"."
- exit 1
- }
- set commits {}
- set phase getcommits
- set startmsecs [clock clicks -milliseconds]
- set nextupdate [expr {$startmsecs + 100}]
- set ncmupdate 1
if [catch {
set parse_args [concat --default HEAD $rargs]
set parsed_args [split [eval exec git-rev-parse $parse_args] "\n"]
@@ -42,26 +29,56 @@
}
set parsed_args $rargs
}
+ return $parsed_args
+}
+
+proc start_rev_list {rlargs} {
+ global startmsecs nextupdate ncmupdate
+ global commfd leftover tclencoding
+
+ set startmsecs [clock clicks -milliseconds]
+ set nextupdate [expr {$startmsecs + 100}]
+ set ncmupdate 1
if [catch {
- set commfd [open "|git-rev-list --header --topo-order --parents $parsed_args" r]
+ set commfd [open [concat | git-rev-list --header --topo-order \
+ --parents $rlargs] r]
} err] {
puts stderr "Error executing git-rev-list: $err"
exit 1
}
set leftover {}
- fconfigure $commfd -blocking 0 -translation lf -encoding $gitencoding
+ fconfigure $commfd -blocking 0 -translation lf
+ if {$tclencoding != {}} {
+ fconfigure $commfd -encoding $tclencoding
+ }
fileevent $commfd readable [list getcommitlines $commfd]
- $canv delete all
- $canv create text 3 3 -anchor nw -text "Reading commits..." \
- -font $mainfont -tags textitems
. config -cursor watch
settextcursor watch
}
+proc getcommits {rargs} {
+ global oldcommits commits phase canv mainfont env
+
+ # check that we can find a .git directory somewhere...
+ set gitdir [gitdir]
+ if {![file isdirectory $gitdir]} {
+ error_popup "Cannot find the git directory \"$gitdir\"."
+ exit 1
+ }
+ set oldcommits {}
+ set commits {}
+ set phase getcommits
+ start_rev_list [parse_args $rargs]
+ $canv delete all
+ $canv create text 3 3 -anchor nw -text "Reading commits..." \
+ -font $mainfont -tags textitems
+}
+
proc getcommitlines {commfd} {
- global commits parents cdate children
+ global oldcommits commits parents cdate children nchildren
global commitlisted phase nextupdate
global stopped redisplaying leftover
+ global canv
set stuff [read $commfd]
if {$stuff == {}} {
@@ -122,7 +139,7 @@
lappend commits $id
set commitlisted($id) 1
parsecommit $id $cmit 1 [lrange $ids 1 end]
- drawcommit $id
+ drawcommit $id 1
if {[clock clicks -milliseconds] >= $nextupdate} {
doupdate 1
}
@@ -132,7 +149,7 @@
set stopped 0
set phase "getcommits"
foreach id $commits {
- drawcommit $id
+ drawcommit $id 1
if {$stopped} break
if {[clock clicks -milliseconds] >= $nextupdate} {
doupdate 1
@@ -168,16 +185,99 @@
parsecommit $id $contents 0 {}
}
-proc parsecommit {id contents listed olds} {
- global commitinfo children nchildren parents nparents cdate ncleft
+proc updatecommits {rargs} {
+ global commitlisted commfd phase
+ global startmsecs nextupdate ncmupdate
+ global idtags idheads idotherrefs
+ global leftover
+ global parsed_args
+ global canv mainfont
+ global oldcommits commits
+ global parents nchildren children ncleft
- set inhdr 1
- set comment {}
- set headline {}
- set auname {}
- set audate {}
- set comname {}
- set comdate {}
+ set old_args $parsed_args
+ parse_args $rargs
+
+ if {$phase == "getcommits" || $phase == "incrdraw"} {
+ # havent read all the old commits, just start again from scratch
+ stopfindproc
+ set oldcommits {}
+ set commits {}
+ foreach v {children nchildren parents commitlisted commitinfo
+ selectedline matchinglines treediffs
+ mergefilelist currentid rowtextx} {
+ global $v
+ catch {unset $v}
+ }
+ readrefs
+ if {$phase == "incrdraw"} {
+ allcanvs delete all
+ $canv create text 3 3 -anchor nw -text "Reading commits..." \
+ -font $mainfont -tags textitems
+ set phase getcommits
+ }
+ start_rev_list $parsed_args
+ return
+ }
+
+ foreach id $old_args {
+ if {![regexp {^[0-9a-f]{40}$} $id]} continue
+ if {[info exists oldref($id)]} continue
+ set oldref($id) $id
+ lappend ignoreold "^$id"
+ }
+ foreach id $parsed_args {
+ if {![regexp {^[0-9a-f]{40}$} $id]} continue
+ if {[info exists ref($id)]} continue
+ set ref($id) $id
+ lappend ignorenew "^$id"
+ }
+
+ foreach a $old_args {
+ if {![info exists ref($a)]} {
+ lappend ignorenew $a
+ }
+ }
+
+ set phase updatecommits
+ set oldcommits $commits
+ set commits {}
+ set removed_commits [split [eval exec git-rev-list $ignorenew] "\n" ]
+ if {[llength $removed_commits] > 0} {
+ allcanvs delete all
+ foreach c $removed_commits {
+ set i [lsearch -exact $oldcommits $c]
+ if {$i >= 0} {
+ set oldcommits [lreplace $oldcommits $i $i]
+ unset commitlisted($c)
+ foreach p $parents($c) {
+ if {[info exists nchildren($p)]} {
+ set j [lsearch -exact $children($p) $c]
+ if {$j >= 0} {
+ set children($p) [lreplace $children($p) $j $j]
+ incr nchildren($p) -1
+ }
+ }
+ }
+ }
+ }
+ set phase removecommits
+ }
+
+ set args {}
+ foreach a $parsed_args {
+ if {![info exists oldref($a)]} {
+ lappend args $a
+ }
+ }
+
+ readrefs
+ start_rev_list [concat $ignoreold $args]
+}
+
+proc updatechildren {id olds} {
+ global children nchildren parents nparents ncleft
+
if {![info exists nchildren($id)]} {
set children($id) {}
set nchildren($id) 0
@@ -196,6 +296,19 @@
incr ncleft($p)
}
}
+}
+
+proc parsecommit {id contents listed olds} {
+ global commitinfo cdate
+
+ set inhdr 1
+ set comment {}
+ set headline {}
+ set auname {}
+ set audate {}
+ set comname {}
+ set comdate {}
+ updatechildren $id $olds
set hdrend [string first "\n\n" $contents]
if {$hdrend < 0} {
# should never happen...
@@ -243,6 +356,9 @@
global tagids idtags headids idheads tagcontents
global otherrefids idotherrefs
+ foreach v {tagids idtags headids idheads otherrefids idotherrefs} {
+ catch {unset $v}
+ }
set refd [open [list | git-ls-remote [gitdir]] r]
while {0 <= [set n [gets $refd line]]} {
if {![regexp {^([0-9a-f]{40}) refs/([^^]*)$} $line \
@@ -292,7 +408,7 @@
tkwait window $w
}
-proc makewindow {} {
+proc makewindow {rargs} {
global canv canv2 canv3 linespc charspc ctext cflist textfont
global findtype findtypemenu findloc findstring fstring geometry
global entries sha1entry sha1string sha1but
@@ -302,6 +418,7 @@
menu .bar
.bar add cascade -label "File" -menu .bar.file
menu .bar.file
+ .bar.file add command -label "Update" -command [list updatecommits $rargs]
.bar.file add command -label "Reread references" -command rereadrefs
.bar.file add command -label "Quit" -command doquit
menu .bar.edit
@@ -719,7 +836,6 @@
proc initgraph {} {
global canvy canvy0 lineno numcommits nextcolor linespc
- global mainline mainlinearrow sidelines
global nchildren ncleft
global displist nhyperspace
@@ -728,9 +844,11 @@
set canvy $canvy0
set lineno -1
set numcommits 0
- catch {unset mainline}
- catch {unset mainlinearrow}
- catch {unset sidelines}
+ foreach v {mainline mainlinearrow sidelines colormap cornercrossings
+ crossings idline lineid} {
+ global $v
+ catch {unset $v}
+ }
foreach id [array names nchildren] {
set ncleft($id) $nchildren($id)
}
@@ -1399,29 +1517,23 @@
}
}
}
- if {$level < 0} {
- if {$todo != {}} {
- puts "ERROR: none of the pending commits can be done yet:"
- foreach p $todo {
- puts " $p ($ncleft($p))"
- }
- }
- return -1
- }
return $level
}
-proc drawcommit {id} {
- global phase todo nchildren datemode nextupdate revlistorder
+proc drawcommit {id reading} {
+ global phase todo nchildren datemode nextupdate revlistorder ncleft
global numcommits ncmupdate displayorder todo onscreen parents
+ global commitlisted commitordered
if {$phase != "incrdraw"} {
set phase incrdraw
set displayorder {}
set todo {}
initgraph
+ catch {unset commitordered}
}
+ set commitordered($id) 1
if {$nchildren($id) == 0} {
lappend todo $id
set onscreen($id) 0
@@ -1436,35 +1548,44 @@
updatetodo $level 0
} else {
set level [decidenext 1]
- if {$level == {} || $id != [lindex $todo $level]} {
- return
- }
+ if {$level == {} || $level < 0} return
while 1 {
+ set id [lindex $todo $level]
+ if {![info exists commitordered($id)]} {
+ break
+ }
lappend displayorder [lindex $todo $level]
if {[updatetodo $level $datemode]} {
set level [decidenext 1]
- if {$level == {}} break
- }
- set id [lindex $todo $level]
- if {![info exists commitlisted($id)]} {
- break
+ if {$level == {} || $level < 0} break
}
}
}
- drawmore 1
+ drawmore $reading
}
proc finishcommits {} {
- global phase
+ global phase oldcommits commits
global canv mainfont ctext maincursor textcursor
+ global parents displayorder todo
- if {$phase != "incrdraw"} {
+ if {$phase == "incrdraw" || $phase == "removecommits"} {
+ foreach id $oldcommits {
+ lappend commits $id
+ drawcommit $id 0
+ }
+ set oldcommits {}
+ drawrest
+ } elseif {$phase == "updatecommits"} {
+ # there were no new commits, in fact
+ set commits $oldcommits
+ set oldcommits {}
+ set phase {}
+ } else {
$canv delete all
$canv create text 3 3 -anchor nw -text "No commits selected" \
-font $mainfont -tags textitems
set phase {}
- } else {
- drawrest
}
. config -cursor $maincursor
settextcursor $textcursor
@@ -1498,7 +1619,7 @@
proc drawrest {} {
global phase stopped redisplaying selectedline
- global datemode todo displayorder
+ global datemode todo displayorder ncleft
global numcommits ncmupdate
global nextupdate startmsecs revlistorder
@@ -1514,6 +1635,13 @@
}
}
}
+ if {$todo != {}} {
+ puts "ERROR: none of the pending commits can be done yet:"
+ foreach p $todo {
+ puts " $p ($ncleft($p))"
+ }
+ }
+
drawmore 0
set phase {}
set drawmsecs [expr {[clock clicks -milliseconds] - $startmsecs}]
@@ -3578,9 +3706,6 @@
set ref($id) [listrefs $id]
}
}
- foreach v {tagids idtags headids idheads otherrefids idotherrefs} {
- catch {unset $v}
- }
readrefs
set refids [lsort -unique [concat $refids [array names idtags] \
[array names idheads] [array names idotherrefs]]]
@@ -3689,17 +3814,294 @@
return [clock format $d -format "%Y-%m-%d %H:%M:%S"]
}
+# This list of encoding names and aliases is distilled from
+# http://www.iana.org/assignments/character-sets.
+# Not all of them are supported by Tcl.
+set encoding_aliases {
+ { ANSI_X3.4-1968 iso-ir-6 ANSI_X3.4-1986 ISO_646.irv:1991 ASCII
+ ISO646-US US-ASCII us IBM367 cp367 csASCII }
+ { ISO-10646-UTF-1 csISO10646UTF1 }
+ { ISO_646.basic:1983 ref csISO646basic1983 }
+ { INVARIANT csINVARIANT }
+ { ISO_646.irv:1983 iso-ir-2 irv csISO2IntlRefVersion }
+ { BS_4730 iso-ir-4 ISO646-GB gb uk csISO4UnitedKingdom }
+ { NATS-SEFI iso-ir-8-1 csNATSSEFI }
+ { NATS-SEFI-ADD iso-ir-8-2 csNATSSEFIADD }
+ { NATS-DANO iso-ir-9-1 csNATSDANO }
+ { NATS-DANO-ADD iso-ir-9-2 csNATSDANOADD }
+ { SEN_850200_B iso-ir-10 FI ISO646-FI ISO646-SE se csISO10Swedish }
+ { SEN_850200_C iso-ir-11 ISO646-SE2 se2 csISO11SwedishForNames }
+ { KS_C_5601-1987 iso-ir-149 KS_C_5601-1989 KSC_5601 korean csKSC56011987 }
+ { ISO-2022-KR csISO2022KR }
+ { EUC-KR csEUCKR }
+ { ISO-2022-JP csISO2022JP }
+ { ISO-2022-JP-2 csISO2022JP2 }
+ { JIS_C6220-1969-jp JIS_C6220-1969 iso-ir-13 katakana x0201-7
+ csISO13JISC6220jp }
+ { JIS_C6220-1969-ro iso-ir-14 jp ISO646-JP csISO14JISC6220ro }
+ { IT iso-ir-15 ISO646-IT csISO15Italian }
+ { PT iso-ir-16 ISO646-PT csISO16Portuguese }
+ { ES iso-ir-17 ISO646-ES csISO17Spanish }
+ { greek7-old iso-ir-18 csISO18Greek7Old }
+ { latin-greek iso-ir-19 csISO19LatinGreek }
+ { DIN_66003 iso-ir-21 de ISO646-DE csISO21German }
+ { NF_Z_62-010_(1973) iso-ir-25 ISO646-FR1 csISO25French }
+ { Latin-greek-1 iso-ir-27 csISO27LatinGreek1 }
+ { ISO_5427 iso-ir-37 csISO5427Cyrillic }
+ { JIS_C6226-1978 iso-ir-42 csISO42JISC62261978 }
+ { BS_viewdata iso-ir-47 csISO47BSViewdata }
+ { INIS iso-ir-49 csISO49INIS }
+ { INIS-8 iso-ir-50 csISO50INIS8 }
+ { INIS-cyrillic iso-ir-51 csISO51INISCyrillic }
+ { ISO_5427:1981 iso-ir-54 ISO5427Cyrillic1981 }
+ { ISO_5428:1980 iso-ir-55 csISO5428Greek }
+ { GB_1988-80 iso-ir-57 cn ISO646-CN csISO57GB1988 }
+ { GB_2312-80 iso-ir-58 chinese csISO58GB231280 }
+ { NS_4551-1 iso-ir-60 ISO646-NO no csISO60DanishNorwegian
+ csISO60Norwegian1 }
+ { NS_4551-2 ISO646-NO2 iso-ir-61 no2 csISO61Norwegian2 }
+ { NF_Z_62-010 iso-ir-69 ISO646-FR fr csISO69French }
+ { videotex-suppl iso-ir-70 csISO70VideotexSupp1 }
+ { PT2 iso-ir-84 ISO646-PT2 csISO84Portuguese2 }
+ { ES2 iso-ir-85 ISO646-ES2 csISO85Spanish2 }
+ { MSZ_7795.3 iso-ir-86 ISO646-HU hu csISO86Hungarian }
+ { JIS_C6226-1983 iso-ir-87 x0208 JIS_X0208-1983 csISO87JISX0208 }
+ { greek7 iso-ir-88 csISO88Greek7 }
+ { ASMO_449 ISO_9036 arabic7 iso-ir-89 csISO89ASMO449 }
+ { iso-ir-90 csISO90 }
+ { JIS_C6229-1984-a iso-ir-91 jp-ocr-a csISO91JISC62291984a }
+ { JIS_C6229-1984-b iso-ir-92 ISO646-JP-OCR-B jp-ocr-b
+ csISO92JISC62991984b }
+ { JIS_C6229-1984-b-add iso-ir-93 jp-ocr-b-add csISO93JIS62291984badd }
+ { JIS_C6229-1984-hand iso-ir-94 jp-ocr-hand csISO94JIS62291984hand }
+ { JIS_C6229-1984-hand-add iso-ir-95 jp-ocr-hand-add
+ csISO95JIS62291984handadd }
+ { JIS_C6229-1984-kana iso-ir-96 csISO96JISC62291984kana }
+ { ISO_2033-1983 iso-ir-98 e13b csISO2033 }
+ { ANSI_X3.110-1983 iso-ir-99 CSA_T500-1983 NAPLPS csISO99NAPLPS }
+ { ISO_8859-1:1987 iso-ir-100 ISO_8859-1 ISO-8859-1 latin1 l1 IBM819
+ CP819 csISOLatin1 }
+ { ISO_8859-2:1987 iso-ir-101 ISO_8859-2 ISO-8859-2 latin2 l2 csISOLatin2 }
+ { T.61-7bit iso-ir-102 csISO102T617bit }
+ { T.61-8bit T.61 iso-ir-103 csISO103T618bit }
+ { ISO_8859-3:1988 iso-ir-109 ISO_8859-3 ISO-8859-3 latin3 l3 csISOLatin3 }
+ { ISO_8859-4:1988 iso-ir-110 ISO_8859-4 ISO-8859-4 latin4 l4 csISOLatin4 }
+ { ECMA-cyrillic iso-ir-111 KOI8-E csISO111ECMACyrillic }
+ { CSA_Z243.4-1985-1 iso-ir-121 ISO646-CA csa7-1 ca csISO121Canadian1 }
+ { CSA_Z243.4-1985-2 iso-ir-122 ISO646-CA2 csa7-2 csISO122Canadian2 }
+ { CSA_Z243.4-1985-gr iso-ir-123 csISO123CSAZ24341985gr }
+ { ISO_8859-6:1987 iso-ir-127 ISO_8859-6 ISO-8859-6 ECMA-114 ASMO-708
+ arabic csISOLatinArabic }
+ { ISO_8859-6-E csISO88596E ISO-8859-6-E }
+ { ISO_8859-6-I csISO88596I ISO-8859-6-I }
+ { ISO_8859-7:1987 iso-ir-126 ISO_8859-7 ISO-8859-7 ELOT_928 ECMA-118
+ greek greek8 csISOLatinGreek }
+ { T.101-G2 iso-ir-128 csISO128T101G2 }
+ { ISO_8859-8:1988 iso-ir-138 ISO_8859-8 ISO-8859-8 hebrew
+ csISOLatinHebrew }
+ { ISO_8859-8-E csISO88598E ISO-8859-8-E }
+ { ISO_8859-8-I csISO88598I ISO-8859-8-I }
+ { CSN_369103 iso-ir-139 csISO139CSN369103 }
+ { JUS_I.B1.002 iso-ir-141 ISO646-YU js yu csISO141JUSIB1002 }
+ { ISO_6937-2-add iso-ir-142 csISOTextComm }
+ { IEC_P27-1 iso-ir-143 csISO143IECP271 }
+ { ISO_8859-5:1988 iso-ir-144 ISO_8859-5 ISO-8859-5 cyrillic
+ csISOLatinCyrillic }
+ { JUS_I.B1.003-serb iso-ir-146 serbian csISO146Serbian }
+ { JUS_I.B1.003-mac macedonian iso-ir-147 csISO147Macedonian }
+ { ISO_8859-9:1989 iso-ir-148 ISO_8859-9 ISO-8859-9 latin5 l5 csISOLatin5 }
+ { greek-ccitt iso-ir-150 csISO150 csISO150GreekCCITT }
+ { NC_NC00-10:81 cuba iso-ir-151 ISO646-CU csISO151Cuba }
+ { ISO_6937-2-25 iso-ir-152 csISO6937Add }
+ { GOST_19768-74 ST_SEV_358-88 iso-ir-153 csISO153GOST1976874 }
+ { ISO_8859-supp iso-ir-154 latin1-2-5 csISO8859Supp }
+ { ISO_10367-box iso-ir-155 csISO10367Box }
+ { ISO-8859-10 iso-ir-157 l6 ISO_8859-10:1992 csISOLatin6 latin6 }
+ { latin-lap lap iso-ir-158 csISO158Lap }
+ { JIS_X0212-1990 x0212 iso-ir-159 csISO159JISX02121990 }
+ { DS_2089 DS2089 ISO646-DK dk csISO646Danish }
+ { us-dk csUSDK }
+ { dk-us csDKUS }
+ { JIS_X0201 X0201 csHalfWidthKatakana }
+ { KSC5636 ISO646-KR csKSC5636 }
+ { ISO-10646-UCS-2 csUnicode }
+ { ISO-10646-UCS-4 csUCS4 }
+ { DEC-MCS dec csDECMCS }
+ { hp-roman8 roman8 r8 csHPRoman8 }
+ { macintosh mac csMacintosh }
+ { IBM037 cp037 ebcdic-cp-us ebcdic-cp-ca ebcdic-cp-wt ebcdic-cp-nl
+ csIBM037 }
+ { IBM038 EBCDIC-INT cp038 csIBM038 }
+ { IBM273 CP273 csIBM273 }
+ { IBM274 EBCDIC-BE CP274 csIBM274 }
+ { IBM275 EBCDIC-BR cp275 csIBM275 }
+ { IBM277 EBCDIC-CP-DK EBCDIC-CP-NO csIBM277 }
+ { IBM278 CP278 ebcdic-cp-fi ebcdic-cp-se csIBM278 }
+ { IBM280 CP280 ebcdic-cp-it csIBM280 }
+ { IBM281 EBCDIC-JP-E cp281 csIBM281 }
+ { IBM284 CP284 ebcdic-cp-es csIBM284 }
+ { IBM285 CP285 ebcdic-cp-gb csIBM285 }
+ { IBM290 cp290 EBCDIC-JP-kana csIBM290 }
+ { IBM297 cp297 ebcdic-cp-fr csIBM297 }
+ { IBM420 cp420 ebcdic-cp-ar1 csIBM420 }
+ { IBM423 cp423 ebcdic-cp-gr csIBM423 }
+ { IBM424 cp424 ebcdic-cp-he csIBM424 }
+ { IBM437 cp437 437 csPC8CodePage437 }
+ { IBM500 CP500 ebcdic-cp-be ebcdic-cp-ch csIBM500 }
+ { IBM775 cp775 csPC775Baltic }
+ { IBM850 cp850 850 csPC850Multilingual }
+ { IBM851 cp851 851 csIBM851 }
+ { IBM852 cp852 852 csPCp852 }
+ { IBM855 cp855 855 csIBM855 }
+ { IBM857 cp857 857 csIBM857 }
+ { IBM860 cp860 860 csIBM860 }
+ { IBM861 cp861 861 cp-is csIBM861 }
+ { IBM862 cp862 862 csPC862LatinHebrew }
+ { IBM863 cp863 863 csIBM863 }
+ { IBM864 cp864 csIBM864 }
+ { IBM865 cp865 865 csIBM865 }
+ { IBM866 cp866 866 csIBM866 }
+ { IBM868 CP868 cp-ar csIBM868 }
+ { IBM869 cp869 869 cp-gr csIBM869 }
+ { IBM870 CP870 ebcdic-cp-roece ebcdic-cp-yu csIBM870 }
+ { IBM871 CP871 ebcdic-cp-is csIBM871 }
+ { IBM880 cp880 EBCDIC-Cyrillic csIBM880 }
+ { IBM891 cp891 csIBM891 }
+ { IBM903 cp903 csIBM903 }
+ { IBM904 cp904 904 csIBBM904 }
+ { IBM905 CP905 ebcdic-cp-tr csIBM905 }
+ { IBM918 CP918 ebcdic-cp-ar2 csIBM918 }
+ { IBM1026 CP1026 csIBM1026 }
+ { EBCDIC-AT-DE csIBMEBCDICATDE }
+ { EBCDIC-AT-DE-A csEBCDICATDEA }
+ { EBCDIC-CA-FR csEBCDICCAFR }
+ { EBCDIC-DK-NO csEBCDICDKNO }
+ { EBCDIC-DK-NO-A csEBCDICDKNOA }
+ { EBCDIC-FI-SE csEBCDICFISE }
+ { EBCDIC-FI-SE-A csEBCDICFISEA }
+ { EBCDIC-FR csEBCDICFR }
+ { EBCDIC-IT csEBCDICIT }
+ { EBCDIC-PT csEBCDICPT }
+ { EBCDIC-ES csEBCDICES }
+ { EBCDIC-ES-A csEBCDICESA }
+ { EBCDIC-ES-S csEBCDICESS }
+ { EBCDIC-UK csEBCDICUK }
+ { EBCDIC-US csEBCDICUS }
+ { UNKNOWN-8BIT csUnknown8BiT }
+ { MNEMONIC csMnemonic }
+ { MNEM csMnem }
+ { VISCII csVISCII }
+ { VIQR csVIQR }
+ { KOI8-R csKOI8R }
+ { IBM00858 CCSID00858 CP00858 PC-Multilingual-850+euro }
+ { IBM00924 CCSID00924 CP00924 ebcdic-Latin9--euro }
+ { IBM01140 CCSID01140 CP01140 ebcdic-us-37+euro }
+ { IBM01141 CCSID01141 CP01141 ebcdic-de-273+euro }
+ { IBM01142 CCSID01142 CP01142 ebcdic-dk-277+euro ebcdic-no-277+euro }
+ { IBM01143 CCSID01143 CP01143 ebcdic-fi-278+euro ebcdic-se-278+euro }
+ { IBM01144 CCSID01144 CP01144 ebcdic-it-280+euro }
+ { IBM01145 CCSID01145 CP01145 ebcdic-es-284+euro }
+ { IBM01146 CCSID01146 CP01146 ebcdic-gb-285+euro }
+ { IBM01147 CCSID01147 CP01147 ebcdic-fr-297+euro }
+ { IBM01148 CCSID01148 CP01148 ebcdic-international-500+euro }
+ { IBM01149 CCSID01149 CP01149 ebcdic-is-871+euro }
+ { IBM1047 IBM-1047 }
+ { PTCP154 csPTCP154 PT154 CP154 Cyrillic-Asian }
+ { Amiga-1251 Ami1251 Amiga1251 Ami-1251 }
+ { UNICODE-1-1 csUnicode11 }
+ { CESU-8 csCESU-8 }
+ { BOCU-1 csBOCU-1 }
+ { UNICODE-1-1-UTF-7 csUnicode11UTF7 }
+ { ISO-8859-14 iso-ir-199 ISO_8859-14:1998 ISO_8859-14 latin8 iso-celtic
+ l8 }
+ { ISO-8859-15 ISO_8859-15 Latin-9 }
+ { ISO-8859-16 iso-ir-226 ISO_8859-16:2001 ISO_8859-16 latin10 l10 }
+ { GBK CP936 MS936 windows-936 }
+ { JIS_Encoding csJISEncoding }
+ { Shift_JIS MS_Kanji csShiftJIS }
+ { Extended_UNIX_Code_Packed_Format_for_Japanese csEUCPkdFmtJapanese
+ EUC-JP }
+ { Extended_UNIX_Code_Fixed_Width_for_Japanese csEUCFixWidJapanese }
+ { ISO-10646-UCS-Basic csUnicodeASCII }
+ { ISO-10646-Unicode-Latin1 csUnicodeLatin1 ISO-10646 }
+ { ISO-Unicode-IBM-1261 csUnicodeIBM1261 }
+ { ISO-Unicode-IBM-1268 csUnicodeIBM1268 }
+ { ISO-Unicode-IBM-1276 csUnicodeIBM1276 }
+ { ISO-Unicode-IBM-1264 csUnicodeIBM1264 }
+ { ISO-Unicode-IBM-1265 csUnicodeIBM1265 }
+ { ISO-8859-1-Windows-3.0-Latin-1 csWindows30Latin1 }
+ { ISO-8859-1-Windows-3.1-Latin-1 csWindows31Latin1 }
+ { ISO-8859-2-Windows-Latin-2 csWindows31Latin2 }
+ { ISO-8859-9-Windows-Latin-5 csWindows31Latin5 }
+ { Adobe-Standard-Encoding csAdobeStandardEncoding }
+ { Ventura-US csVenturaUS }
+ { Ventura-International csVenturaInternational }
+ { PC8-Danish-Norwegian csPC8DanishNorwegian }
+ { PC8-Turkish csPC8Turkish }
+ { IBM-Symbols csIBMSymbols }
+ { IBM-Thai csIBMThai }
+ { HP-Legal csHPLegal }
+ { HP-Pi-font csHPPiFont }
+ { HP-Math8 csHPMath8 }
+ { Adobe-Symbol-Encoding csHPPSMath }
+ { HP-DeskTop csHPDesktop }
+ { Ventura-Math csVenturaMath }
+ { Microsoft-Publishing csMicrosoftPublishing }
+ { Windows-31J csWindows31J }
+ { GB2312 csGB2312 }
+ { Big5 csBig5 }
+}
+
+proc tcl_encoding {enc} {
+ global encoding_aliases
+ set names [encoding names]
+ set lcnames [string tolower $names]
+ set enc [string tolower $enc]
+ set i [lsearch -exact $lcnames $enc]
+ if {$i < 0} {
+ # look for "isonnn" instead of "iso-nnn" or "iso_nnn"
+ if {[regsub {^iso[-_]} $enc iso encx]} {
+ set i [lsearch -exact $lcnames $encx]
+ }
+ }
+ if {$i < 0} {
+ foreach l $encoding_aliases {
+ set ll [string tolower $l]
+ if {[lsearch -exact $ll $enc] < 0} continue
+ # look through the aliases for one that tcl knows about
+ foreach e $ll {
+ set i [lsearch -exact $lcnames $e]
+ if {$i < 0} {
+ if {[regsub {^iso[-_]} $e iso ex]} {
+ set i [lsearch -exact $lcnames $ex]
+ }
+ }
+ if {$i >= 0} break
+ }
+ break
+ }
+ }
+ if {$i >= 0} {
+ return [lindex $names $i]
+ }
+ return {}
+}
+
# defaults...
set datemode 0
set diffopts "-U 5 -p"
set wrcomcmd "git-diff-tree --stdin -p --pretty"
-set gitencoding ""
+set gitencoding {}
catch {
set gitencoding [exec git-repo-config --get i18n.commitencoding]
}
if {$gitencoding == ""} {
- set gitencoding "utf-8"
+ set gitencoding "utf-8"
+}
+set tclencoding [tcl_encoding $gitencoding]
+if {$tclencoding == {}} {
+ puts stderr "Warning: encoding $gitencoding is not supported by Tcl/Tk"
}
set mainfont {Helvetica 9}
@@ -3738,6 +4140,6 @@
set stuffsaved 0
set patchnum 0
setcoords
-makewindow
+makewindow $revtreeargs
readrefs
getcommits $revtreeargs
diff --git a/hash-object.c b/hash-object.c
index ccba11c..6502b5b 100644
--- a/hash-object.c
+++ b/hash-object.c
@@ -21,8 +21,16 @@
printf("%s\n", sha1_to_hex(sha1));
}
+static void hash_stdin(const char *type, int write_object)
+{
+ unsigned char sha1[20];
+ if (index_pipe(sha1, 0, type, write_object))
+ die("Unable to add stdin to database");
+ printf("%s\n", sha1_to_hex(sha1));
+}
+
static const char hash_object_usage[] =
-"git-hash-object [-t <type>] [-w] <file>...";
+"git-hash-object [-t <type>] [-w] [--stdin] <file>...";
int main(int argc, char **argv)
{
@@ -31,26 +39,41 @@
int write_object = 0;
const char *prefix = NULL;
int prefix_length = -1;
+ int no_more_flags = 0;
for (i = 1 ; i < argc; i++) {
- if (!strcmp(argv[i], "-t")) {
- if (argc <= ++i)
- die(hash_object_usage);
- type = argv[i];
- }
- else if (!strcmp(argv[i], "-w")) {
- if (prefix_length < 0) {
- prefix = setup_git_directory();
- prefix_length = prefix ? strlen(prefix) : 0;
+ if (!no_more_flags && argv[i][0] == '-') {
+ if (!strcmp(argv[i], "-t")) {
+ if (argc <= ++i)
+ die(hash_object_usage);
+ type = argv[i];
}
- write_object = 1;
- }
+ else if (!strcmp(argv[i], "-w")) {
+ if (prefix_length < 0) {
+ prefix = setup_git_directory();
+ prefix_length =
+ prefix ? strlen(prefix) : 0;
+ }
+ write_object = 1;
+ }
+ else if (!strcmp(argv[i], "--")) {
+ no_more_flags = 1;
+ }
+ else if (!strcmp(argv[i], "--help"))
+ usage(hash_object_usage);
+ else if (!strcmp(argv[i], "--stdin")) {
+ hash_stdin(type, write_object);
+ }
+ else
+ die(hash_object_usage);
+ }
else {
const char *arg = argv[i];
if (0 <= prefix_length)
arg = prefix_filename(prefix, prefix_length,
arg);
hash_object(arg, type, write_object);
+ no_more_flags = 1;
}
}
return 0;
diff --git a/init-db.c b/init-db.c
index 8195b68..ead37b5 100644
--- a/init-db.c
+++ b/init-db.c
@@ -237,9 +237,7 @@
for (i = 1; i < argc; i++, argv++) {
char *arg = argv[1];
- if (arg[0] != '-')
- break;
- else if (!strncmp(arg, "--template=", 11))
+ if (!strncmp(arg, "--template=", 11))
template_dir = arg+11;
else
die(init_db_usage);
diff --git a/mailinfo.c b/mailinfo.c
index 890e348..d4b4163 100644
--- a/mailinfo.c
+++ b/mailinfo.c
@@ -8,12 +8,9 @@
#include <string.h>
#include <ctype.h>
#include <iconv.h>
+#include "git-compat-util.h"
#include "cache.h"
-#ifdef NO_STRCASESTR
-extern char *gitstrcasestr(const char *haystack, const char *needle);
-#endif
-
static FILE *cmitmsg, *patchfile;
static int keep_subject = 0;
diff --git a/object.c b/object.c
index 427e14c..cf5931a 100644
--- a/object.c
+++ b/object.c
@@ -82,7 +82,12 @@
{
const struct object * const *pa = a;
const struct object * const *pb = b;
- return *pa - *pb;
+ if (*pa == *pb)
+ return 0;
+ else if (*pa < *pb)
+ return -1;
+ else
+ return 1;
}
void set_object_refs(struct object *obj, struct object_refs *refs)
diff --git a/pack-objects.c b/pack-objects.c
index a62c9f8..caf3b6b 100644
--- a/pack-objects.c
+++ b/pack-objects.c
@@ -4,7 +4,7 @@
#include "pack.h"
#include "csum-file.h"
-static const char pack_usage[] = "git-pack-objects [--local] [--incremental] [--window=N] [--depth=N] {--stdout | base-name} < object-list";
+static const char pack_usage[] = "git-pack-objects [--non-empty] [--local] [--incremental] [--window=N] [--depth=N] {--stdout | base-name} < object-list";
struct object_entry {
unsigned char sha1[20];
diff --git a/receive-pack.c b/receive-pack.c
index 1873506..cbe37e7 100644
--- a/receive-pack.c
+++ b/receive-pack.c
@@ -173,7 +173,7 @@
argc++;
}
argv[argc] = NULL;
- run_command_v(argc, argv);
+ run_command_v_opt(argc, argv, RUN_COMMAND_NO_STDIO);
}
/*
diff --git a/refs.c b/refs.c
index ac26198..d2aec73 100644
--- a/refs.c
+++ b/refs.c
@@ -292,6 +292,8 @@
return -1;
filename = ref_file_name(ref);
lock_filename = ref_lock_file_name(ref);
+ if (safe_create_leading_directories(filename))
+ die("unable to create leading directory for %s", filename);
retval = write_ref_file(filename, lock_filename, fd, sha1);
free(filename);
free(lock_filename);
@@ -358,6 +360,8 @@
return -1;
filename = ref_file_name(ref);
lock_filename = ref_lock_file_name(ref);
+ if (safe_create_leading_directories(filename))
+ die("unable to create leading directory for %s", filename);
fd = open(lock_filename, O_WRONLY | O_CREAT | O_EXCL, 0666);
if (fd < 0) {
error("Writing %s", lock_filename);
diff --git a/run-command.c b/run-command.c
index 5787a50..8bf5922 100644
--- a/run-command.c
+++ b/run-command.c
@@ -2,13 +2,19 @@
#include "run-command.h"
#include <sys/wait.h>
-int run_command_v(int argc, char **argv)
+int run_command_v_opt(int argc, char **argv, int flags)
{
pid_t pid = fork();
if (pid < 0)
return -ERR_RUN_COMMAND_FORK;
if (!pid) {
+ if (flags & RUN_COMMAND_NO_STDIO) {
+ int fd = open("/dev/null", O_RDWR);
+ dup2(fd, 0);
+ dup2(fd, 1);
+ close(fd);
+ }
execvp(argv[0], (char *const*) argv);
die("exec %s failed.", argv[0]);
}
@@ -36,6 +42,11 @@
}
}
+int run_command_v(int argc, char **argv)
+{
+ return run_command_v_opt(argc, argv, 0);
+}
+
int run_command(const char *cmd, ...)
{
int argc;
@@ -54,5 +65,5 @@
va_end(param);
if (MAX_RUN_COMMAND_ARGS <= argc)
return error("too many args to run %s", cmd);
- return run_command_v(argc, argv);
+ return run_command_v_opt(argc, argv, 0);
}
diff --git a/run-command.h b/run-command.h
index 5ee0972..2469eea 100644
--- a/run-command.h
+++ b/run-command.h
@@ -11,6 +11,9 @@
ERR_RUN_COMMAND_WAITPID_NOEXIT,
};
+#define RUN_COMMAND_NO_STDIO 1
+
+int run_command_v_opt(int argc, char **argv, int opt);
int run_command_v(int argc, char **argv);
int run_command(const char *cmd, ...);
diff --git a/send-pack.c b/send-pack.c
index 2a14b00..f61c15c 100644
--- a/send-pack.c
+++ b/send-pack.c
@@ -190,6 +190,12 @@
if (match_refs(local_refs, remote_refs, &remote_tail,
nr_refspec, refspec, send_all))
return -1;
+
+ if (!remote_refs) {
+ fprintf(stderr, "No refs in common and none specified; doing nothing.\n");
+ return 0;
+ }
+
/*
* Finally, tell the other end!
*/
diff --git a/server-info.c b/server-info.c
index e4006f0..df19e49 100644
--- a/server-info.c
+++ b/server-info.c
@@ -44,43 +44,17 @@
/* packs */
static struct pack_info {
- unsigned long latest;
struct packed_git *p;
int old_num;
int new_num;
int nr_alloc;
int nr_heads;
unsigned char (*head)[20];
- char dep[0]; /* more */
} **info;
static int num_pack;
static const char *objdir;
static int objdirlen;
-static struct object *parse_object_cheap(const unsigned char *sha1)
-{
- struct object *o;
-
- if ((o = parse_object(sha1)) == NULL)
- return NULL;
- if (o->type == commit_type) {
- struct commit *commit = (struct commit *)o;
- free(commit->buffer);
- commit->buffer = NULL;
- } else if (o->type == tree_type) {
- struct tree *tree = (struct tree *)o;
- struct tree_entry_list *e, *n;
- for (e = tree->entries; e; e = n) {
- free(e->name);
- e->name = NULL;
- n = e->next;
- free(e);
- }
- tree->entries = NULL;
- }
- return o;
-}
-
static struct pack_info *find_pack_by_name(const char *name)
{
int i;
@@ -93,25 +67,6 @@
return NULL;
}
-static struct pack_info *find_pack_by_old_num(int old_num)
-{
- int i;
- for (i = 0; i < num_pack; i++)
- if (info[i]->old_num == old_num)
- return info[i];
- return NULL;
-}
-
-static int add_head_def(struct pack_info *this, unsigned char *sha1)
-{
- if (this->nr_alloc <= this->nr_heads) {
- this->nr_alloc = alloc_nr(this->nr_alloc);
- this->head = xrealloc(this->head, this->nr_alloc * 20);
- }
- memcpy(this->head[this->nr_heads++], sha1, 20);
- return 0;
-}
-
/* Returns non-zero when we detect that the info in the
* old file is useless.
*/
@@ -123,9 +78,7 @@
return 0;
}
else {
- /* The file describes a pack that is no longer here;
- * dependencies between packs needs to be recalculated.
- */
+ /* The file describes a pack that is no longer here */
return 1;
}
}
@@ -133,65 +86,6 @@
/* Returns non-zero when we detect that the info in the
* old file is useless.
*/
-static int parse_depend_def(char *line)
-{
- unsigned long num;
- char *cp, *ep;
- struct pack_info *this, *that;
-
- cp = line + 2;
- num = strtoul(cp, &ep, 10);
- if (ep == cp)
- return error("invalid input %s", line);
- this = find_pack_by_old_num(num);
- if (!this)
- return 0;
- while (ep && *(cp = ep)) {
- num = strtoul(cp, &ep, 10);
- if (ep == cp)
- break;
- that = find_pack_by_old_num(num);
- if (!that)
- /* The pack this one depends on does not
- * exist; this should not happen because
- * we write out the list of packs first and
- * then dependency information, but it means
- * the file is useless anyway.
- */
- return 1;
- this->dep[that->new_num] = 1;
- }
- return 0;
-}
-
-/* Returns non-zero when we detect that the info in the
- * old file is useless.
- */
-static int parse_head_def(char *line)
-{
- unsigned char sha1[20];
- unsigned long num;
- char *cp, *ep;
- struct pack_info *this;
- struct object *o;
-
- cp = line + 2;
- num = strtoul(cp, &ep, 10);
- if (ep == cp || *ep++ != ' ')
- return error("invalid input ix %s", line);
- this = find_pack_by_old_num(num);
- if (!this)
- return 1; /* You know the drill. */
- if (get_sha1_hex(ep, sha1) || ep[40] != ' ')
- return error("invalid input sha1 %s (%s)", line, ep);
- if ((o = parse_object_cheap(sha1)) == NULL)
- return error("no such object: %s", line);
- return add_head_def(this, sha1);
-}
-
-/* Returns non-zero when we detect that the info in the
- * old file is useless.
- */
static int read_pack_info_file(const char *infofile)
{
FILE *fp;
@@ -212,13 +106,11 @@
if (parse_pack_def(line, old_cnt++))
goto out_stale;
break;
- case 'D': /* D ix dep-ix1 dep-ix2... */
- if (parse_depend_def(line))
- goto out_stale;
+ case 'D': /* we used to emit D but that was misguided. */
+ goto out_stale;
break;
- case 'T': /* T ix sha1 type */
- if (parse_head_def(line))
- goto out_stale;
+ case 'T': /* we used to emit T but nobody uses it. */
+ goto out_stale;
break;
default:
error("unrecognized: %s", line);
@@ -232,32 +124,6 @@
return 1;
}
-/* We sort the packs according to the date of the latest commit. That
- * in turn indicates how young the pack is, and in general we would
- * want to depend on younger packs.
- */
-static unsigned long get_latest_commit_date(struct packed_git *p)
-{
- unsigned char sha1[20];
- struct object *o;
- int num = num_packed_objects(p);
- int i;
- unsigned long latest = 0;
-
- for (i = 0; i < num; i++) {
- if (nth_packed_object_sha1(p, i, sha1))
- die("corrupt pack file %s?", p->pack_name);
- if ((o = parse_object_cheap(sha1)) == NULL)
- die("cannot parse %s", sha1_to_hex(sha1));
- if (o->type == commit_type) {
- struct commit *commit = (struct commit *)o;
- if (latest < commit->date)
- latest = commit->date;
- }
- }
- return latest;
-}
-
static int compare_info(const void *a_, const void *b_)
{
struct pack_info * const* a = a_;
@@ -273,10 +139,11 @@
/* The other way around. */
return 1;
- if ((*a)->latest < (*b)->latest)
- return -1;
- else if ((*a)->latest == (*b)->latest)
+ /* then it does not matter but at least keep the comparison stable */
+ if ((*a)->p == (*b)->p)
return 0;
+ else if ((*a)->p < (*b)->p)
+ return -1;
else
return 1;
}
@@ -286,7 +153,6 @@
struct packed_git *p;
int stale;
int i = 0;
- char *dep_temp;
objdir = get_object_directory();
objdirlen = strlen(objdir);
@@ -296,18 +162,16 @@
/* we ignore things on alternate path since they are
* not available to the pullers in general.
*/
- if (strncmp(p->pack_name, objdir, objdirlen) ||
- strncmp(p->pack_name + objdirlen, "/pack/", 6))
+ if (!p->pack_local)
continue;
i++;
}
num_pack = i;
info = xcalloc(num_pack, sizeof(struct pack_info *));
for (i = 0, p = packed_git; p; p = p->next) {
- if (strncmp(p->pack_name, objdir, objdirlen) ||
- p->pack_name[objdirlen] != '/')
+ if (!p->pack_local)
continue;
- info[i] = xcalloc(1, sizeof(struct pack_info) + num_pack);
+ info[i] = xcalloc(1, sizeof(struct pack_info));
info[i]->p = p;
info[i]->old_num = -1;
i++;
@@ -321,177 +185,21 @@
for (i = 0; i < num_pack; i++) {
if (stale) {
info[i]->old_num = -1;
- memset(info[i]->dep, 0, num_pack);
info[i]->nr_heads = 0;
}
- if (info[i]->old_num < 0)
- info[i]->latest = get_latest_commit_date(info[i]->p);
}
+ /* renumber them */
qsort(info, num_pack, sizeof(info[0]), compare_info);
for (i = 0; i < num_pack; i++)
info[i]->new_num = i;
-
- /* we need to fix up the dependency information
- * for the old ones.
- */
- dep_temp = NULL;
- for (i = 0; i < num_pack; i++) {
- int old;
-
- if (info[i]->old_num < 0)
- continue;
- if (! dep_temp)
- dep_temp = xmalloc(num_pack);
- memset(dep_temp, 0, num_pack);
- for (old = 0; old < num_pack; old++) {
- struct pack_info *base;
- if (!info[i]->dep[old])
- continue;
- base = find_pack_by_old_num(old);
- if (!base)
- die("internal error renumbering");
- dep_temp[base->new_num] = 1;
- }
- memcpy(info[i]->dep, dep_temp, num_pack);
- }
- free(dep_temp);
}
static void write_pack_info_file(FILE *fp)
{
- int i, j;
+ int i;
for (i = 0; i < num_pack; i++)
fprintf(fp, "P %s\n", info[i]->p->pack_name + objdirlen + 6);
-
- for (i = 0; i < num_pack; i++) {
- fprintf(fp, "D %1d", i);
- for (j = 0; j < num_pack; j++) {
- if ((i == j) || !(info[i]->dep[j]))
- continue;
- fprintf(fp, " %1d", j);
- }
- fputc('\n', fp);
- }
-
- for (i = 0; i < num_pack; i++) {
- struct pack_info *this = info[i];
- for (j = 0; j < this->nr_heads; j++) {
- struct object *o = lookup_object(this->head[j]);
- fprintf(fp, "T %1d %s %s\n",
- i, sha1_to_hex(this->head[j]), o->type);
- }
- }
-
-}
-
-#define REFERENCED 01
-#define INTERNAL 02
-#define EMITTED 04
-
-static void show(struct object *o, int pack_ix)
-{
- /*
- * We are interested in objects that are not referenced,
- * and objects that are referenced but not internal.
- */
- if (o->flags & EMITTED)
- return;
-
- if (!(o->flags & REFERENCED))
- add_head_def(info[pack_ix], o->sha1);
- else if ((o->flags & REFERENCED) && !(o->flags & INTERNAL)) {
- int i;
-
- /* Which pack contains this object? That is what
- * pack_ix can depend on. We earlier sorted info
- * array from youngest to oldest, so try newer packs
- * first to favor them here.
- */
- for (i = num_pack - 1; 0 <= i; i--) {
- struct packed_git *p = info[i]->p;
- struct pack_entry ent;
- if (find_pack_entry_one(o->sha1, &ent, p)) {
- info[pack_ix]->dep[i] = 1;
- break;
- }
- }
- }
- o->flags |= EMITTED;
-}
-
-static void find_pack_info_one(int pack_ix)
-{
- unsigned char sha1[20];
- struct object *o;
- int i;
- struct packed_git *p = info[pack_ix]->p;
- int num = num_packed_objects(p);
-
- /* Scan objects, clear flags from all the edge ones and
- * internal ones, possibly marked in the previous round.
- */
- for (i = 0; i < num; i++) {
- if (nth_packed_object_sha1(p, i, sha1))
- die("corrupt pack file %s?", p->pack_name);
- if ((o = lookup_object(sha1)) == NULL)
- die("cannot parse %s", sha1_to_hex(sha1));
- if (o->refs) {
- struct object_refs *refs = o->refs;
- int j;
- for (j = 0; j < refs->count; j++)
- refs->ref[j]->flags = 0;
- }
- o->flags = 0;
- }
-
- /* Mark all the internal ones */
- for (i = 0; i < num; i++) {
- if (nth_packed_object_sha1(p, i, sha1))
- die("corrupt pack file %s?", p->pack_name);
- if ((o = lookup_object(sha1)) == NULL)
- die("cannot find %s", sha1_to_hex(sha1));
- if (o->refs) {
- struct object_refs *refs = o->refs;
- int j;
- for (j = 0; j < refs->count; j++)
- refs->ref[j]->flags |= REFERENCED;
- }
- o->flags |= INTERNAL;
- }
-
- for (i = 0; i < num; i++) {
- if (nth_packed_object_sha1(p, i, sha1))
- die("corrupt pack file %s?", p->pack_name);
- if ((o = lookup_object(sha1)) == NULL)
- die("cannot find %s", sha1_to_hex(sha1));
-
- show(o, pack_ix);
- if (o->refs) {
- struct object_refs *refs = o->refs;
- int j;
- for (j = 0; j < refs->count; j++)
- show(refs->ref[j], pack_ix);
- }
- }
-
-}
-
-static void find_pack_info(void)
-{
- int i;
- for (i = 0; i < num_pack; i++) {
- /* The packed objects are cast in stone, and a head
- * in a pack will stay as head, so is the set of missing
- * objects. If the repo has been reorganized and we
- * are missing some packs available back then, we have
- * already discarded the info read from the file, so
- * we will find (old_num < 0) in that case.
- */
- if (0 <= info[i]->old_num)
- continue;
- find_pack_info_one(i);
- }
}
static int update_info_packs(int force)
@@ -506,7 +214,6 @@
strcpy(name + namelen, "+");
init_pack_info(infofile, force);
- find_pack_info();
safe_create_leading_directories(name);
fp = fopen(name, "w");
@@ -530,5 +237,8 @@
errs = errs | update_info_refs(force);
errs = errs | update_info_packs(force);
+ /* remove leftover rev-cache file if there is any */
+ unlink(git_path("info/rev-cache"));
+
return errs;
}
diff --git a/sha1_file.c b/sha1_file.c
index 82a0188..fa22e9c 100644
--- a/sha1_file.c
+++ b/sha1_file.c
@@ -184,8 +184,8 @@
* alternate_object_database. The elements on this list come from
* non-empty elements from colon separated ALTERNATE_DB_ENVIRONMENT
* environment variable, and $GIT_OBJECT_DIRECTORY/info/alternates,
- * whose contents is exactly in the same format as that environment
- * variable. Its base points at a statically allocated buffer that
+ * whose contents is similar to that environment variable but can be
+ * LF separated. Its base points at a statically allocated buffer that
* contains "/the/directory/corresponding/to/.git/objects/...", while
* its name points just after the slash at the end of ".git/objects/"
* in the example above, and has enough space to hold 40-byte hex
@@ -197,6 +197,7 @@
{
const char *cp, *last;
struct alternate_object_database *ent;
+ const char *objdir = get_object_directory();
int base_len = -1;
last = alt;
@@ -211,6 +212,7 @@
for ( ; cp < ep && *cp != sep; cp++)
;
if (last != cp) {
+ struct alternate_object_database *alt;
/* 43 = 40-byte + 2 '/' + terminating NUL */
int pfxlen = cp - last;
int entlen = pfxlen + 43;
@@ -223,9 +225,7 @@
pfxlen += base_len;
}
ent = xmalloc(sizeof(*ent) + entlen);
- *alt_odb_tail = ent;
- alt_odb_tail = &(ent->next);
- ent->next = NULL;
+
if (*last != '/' && relative_base) {
memcpy(ent->base, relative_base, base_len - 1);
ent->base[base_len - 1] = '/';
@@ -237,6 +237,22 @@
ent->name = ent->base + pfxlen + 1;
ent->base[pfxlen] = ent->base[pfxlen + 3] = '/';
ent->base[entlen-1] = 0;
+
+ /* Prevent the common mistake of listing the same
+ * thing twice, or object directory itself.
+ */
+ for (alt = alt_odb_list; alt; alt = alt->next)
+ if (!memcmp(ent->base, alt->base, pfxlen))
+ goto bad;
+ if (!memcmp(ent->base, objdir, pfxlen)) {
+ bad:
+ free(ent);
+ }
+ else {
+ *alt_odb_tail = ent;
+ alt_odb_tail = &(ent->next);
+ ent->next = NULL;
+ }
}
while (cp < ep && *cp == sep)
cp++;
@@ -531,8 +547,9 @@
prepare_packed_git_one(get_object_directory(), 1);
prepare_alt_odb();
for (alt = alt_odb_list; alt; alt = alt->next) {
- alt->name[0] = 0;
+ alt->name[-1] = 0;
prepare_packed_git_one(alt->base, 0);
+ alt->name[-1] = '/';
}
run_once = 1;
}
@@ -1511,6 +1528,40 @@
return find_sha1_file(sha1, &st) ? 1 : 0;
}
+int index_pipe(unsigned char *sha1, int fd, const char *type, int write_object)
+{
+ unsigned long size = 4096;
+ char *buf = malloc(size);
+ int iret, ret;
+ unsigned long off = 0;
+ unsigned char hdr[50];
+ int hdrlen;
+ do {
+ iret = read(fd, buf + off, size - off);
+ if (iret > 0) {
+ off += iret;
+ if (off == size) {
+ size *= 2;
+ buf = realloc(buf, size);
+ }
+ }
+ } while (iret > 0);
+ if (iret < 0) {
+ free(buf);
+ return -1;
+ }
+ if (!type)
+ type = "blob";
+ if (write_object)
+ ret = write_sha1_file(buf, off, type, sha1);
+ else {
+ write_sha1_file_prepare(buf, off, type, sha1, hdr, &hdrlen);
+ ret = 0;
+ }
+ free(buf);
+ return ret;
+}
+
int index_fd(unsigned char *sha1, int fd, struct stat *st, int write_object, const char *type)
{
unsigned long size = st->st_size;
diff --git a/show-branch.c b/show-branch.c
index d8808ee..ab158eb 100644
--- a/show-branch.c
+++ b/show-branch.c
@@ -1,10 +1,11 @@
#include <stdlib.h>
+#include <fnmatch.h>
#include "cache.h"
#include "commit.h"
#include "refs.h"
static const char show_branch_usage[] =
-"git-show-branch [--all] [--heads] [--tags] [--more=count | --list | --independent | --merge-base ] [<refs>...]";
+"git-show-branch [--all] [--heads] [--tags] [--topo-order] [--more=count | --list | --independent | --merge-base ] [<refs>...]";
#define UNINTERESTING 01
@@ -54,7 +55,7 @@
/* Parent is the first parent of the commit. We may name it
* as (n+1)th generation ancestor of the same head_name as
- * commit is nth generation ancestore of, if that generation
+ * commit is nth generation ancestor of, if that generation
* number is better than the name it already has.
*/
static void name_parent(struct commit *commit, struct commit *parent)
@@ -332,6 +333,39 @@
return append_ref(refname + 5, sha1);
}
+static const char *match_ref_pattern = NULL;
+static int match_ref_slash = 0;
+static int count_slash(const char *s)
+{
+ int cnt = 0;
+ while (*s)
+ if (*s++ == '/')
+ cnt++;
+ return cnt;
+}
+
+static int append_matching_ref(const char *refname, const unsigned char *sha1)
+{
+ /* we want to allow pattern hold/<asterisk> to show all
+ * branches under refs/heads/hold/, and v0.99.9? to show
+ * refs/tags/v0.99.9a and friends.
+ */
+ const char *tail;
+ int slash = count_slash(refname);
+ for (tail = refname; *tail && match_ref_slash < slash; )
+ if (*tail++ == '/')
+ slash--;
+ if (!*tail)
+ return 0;
+ if (fnmatch(match_ref_pattern, tail, 0))
+ return 0;
+ if (!strncmp("refs/heads/", refname, 11))
+ return append_head_ref(refname, sha1);
+ if (!strncmp("refs/tags/", refname, 10))
+ return append_tag_ref(refname, sha1);
+ return append_ref(refname, sha1);
+}
+
static void snarf_refs(int head, int tag)
{
if (head) {
@@ -400,6 +434,27 @@
return 0;
}
+static void append_one_rev(const char *av)
+{
+ unsigned char revkey[20];
+ if (!get_sha1(av, revkey)) {
+ append_ref(av, revkey);
+ return;
+ }
+ if (strchr(av, '*') || strchr(av, '?')) {
+ /* glob style match */
+ int saved_matches = ref_name_cnt;
+ match_ref_pattern = av;
+ match_ref_slash = count_slash(av);
+ for_each_ref(append_matching_ref);
+ if (saved_matches == ref_name_cnt &&
+ ref_name_cnt < MAX_REVS)
+ error("no matching refs with %s", av);
+ return;
+ }
+ die("bad sha1 reference %s", av);
+}
+
int main(int ac, char **av)
{
struct commit *rev[MAX_REVS], *commit;
@@ -458,17 +513,20 @@
if (all_heads + all_tags)
snarf_refs(all_heads, all_tags);
- while (0 < ac) {
- unsigned char revkey[20];
- if (get_sha1(*av, revkey))
- die("bad sha1 reference %s", *av);
- append_ref(*av, revkey);
- ac--; av++;
+ if (ac) {
+ while (0 < ac) {
+ append_one_rev(*av);
+ ac--; av++;
+ }
}
-
- /* If still no revs, then add heads */
- if (!ref_name_cnt)
+ else {
+ /* If no revs given, then add heads */
snarf_refs(1, 0);
+ }
+ if (!ref_name_cnt) {
+ fprintf(stderr, "No revs to be shown.\n");
+ exit(0);
+ }
for (num_rev = 0; ref_name[num_rev]; num_rev++) {
unsigned char revkey[20];
diff --git a/t/t0000-basic.sh b/t/t0000-basic.sh
index 22bdaca..bc3e711 100755
--- a/t/t0000-basic.sh
+++ b/t/t0000-basic.sh
@@ -17,8 +17,37 @@
swapping compression and hashing order, the person who is making the
modification *should* take notice and update the test vectors here.
'
+
+################################################################
+# It appears that people are getting bitten by not installing
+# 'merge' (usually part of RCS package in binary distributions)
+# or have too old python without subprocess. Check them and error
+# out before running any tests. Also catch the bogosity of trying
+# to run tests without building while we are at it.
+
+../git >/dev/null
+if test $? != 1
+then
+ echo >&2 'You do not seem to have built git yet.'
+ exit 1
+fi
+
+merge >/dev/null 2>/dev/null
+if test $? == 127
+then
+ echo >&2 'You do not seem to have "merge" installed.
+Please check INSTALL document.'
+ exit 1
+fi
+
. ./test-lib.sh
+"$PYTHON" -c 'import subprocess' || {
+ echo >&2 'Your python seem to lack "subprocess" module.
+Please check INSTALL document.'
+ exit 1
+}
+
################################################################
# init-db has been done in an empty repository.
# make sure it is empty.
diff --git a/t/t1300-repo-config.sh b/t/t1300-repo-config.sh
index 5e994ff..207dd3d 100644
--- a/t/t1300-repo-config.sh
+++ b/t/t1300-repo-config.sh
@@ -12,10 +12,6 @@
git-repo-config core.penguin "little blue"
cat > expect << EOF
-#
-# This is the config file
-#
-
[core]
penguin = little blue
EOF
@@ -25,10 +21,6 @@
git-repo-config Core.Movie BadPhysics
cat > expect << EOF
-#
-# This is the config file
-#
-
[core]
penguin = little blue
Movie = BadPhysics
@@ -39,10 +31,6 @@
git-repo-config Cores.WhatEver Second
cat > expect << EOF
-#
-# This is the config file
-#
-
[core]
penguin = little blue
Movie = BadPhysics
@@ -55,10 +43,6 @@
git-repo-config CORE.UPPERCASE true
cat > expect << EOF
-#
-# This is the config file
-#
-
[core]
penguin = little blue
Movie = BadPhysics
@@ -76,10 +60,6 @@
'git-repo-config core.penguin "very blue" !kingpin'
cat > expect << EOF
-#
-# This is the config file
-#
-
[core]
penguin = very blue
Movie = BadPhysics
diff --git a/t/t3300-funny-names.sh b/t/t3300-funny-names.sh
index 897c378..6a85d67 100755
--- a/t/t3300-funny-names.sh
+++ b/t/t3300-funny-names.sh
@@ -15,7 +15,7 @@
. ./test-lib.sh
p0='no-funny'
-p1='tabs and spaces'
+p1='tabs ," (dq) and spaces'
p2='just space'
cat >"$p0" <<\EOF
@@ -39,7 +39,7 @@
echo 'just space
no-funny
-"tabs\tand spaces"' >expected
+"tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-ls-files with-funny' \
'git-update-index --add "$p1" &&
git-ls-files >current &&
@@ -47,7 +47,7 @@
echo 'just space
no-funny
-tabs and spaces' >expected
+tabs ," (dq) and spaces' >expected
test_expect_success 'git-ls-files -z with-funny' \
'git-ls-files -z | tr \\0 \\012 >current &&
diff -u expected current'
@@ -57,12 +57,12 @@
echo 'just space
no-funny
-"tabs\tand spaces"' >expected
+"tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-ls-tree with funny' \
'git-ls-tree -r $t1 | sed -e "s/^[^ ]* //" >current &&
diff -u expected current'
-echo 'A "tabs\tand spaces"' >expected
+echo 'A "tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-diff-index with-funny' \
'git-diff-index --name-status $t0 >current &&
diff -u expected current'
@@ -72,7 +72,7 @@
diff -u expected current'
echo 'A
-tabs and spaces' >expected
+tabs ," (dq) and spaces' >expected
test_expect_success 'git-diff-index -z with-funny' \
'git-diff-index -z --name-status $t0 | tr \\0 \\012 >current &&
diff -u expected current'
@@ -81,23 +81,23 @@
'git-diff-tree -z --name-status $t0 $t1 | tr \\0 \\012 >current &&
diff -u expected current'
-echo 'CNUM no-funny "tabs\tand spaces"' >expected
+echo 'CNUM no-funny "tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-diff-tree -C with-funny' \
'git-diff-tree -C --find-copies-harder --name-status \
$t0 $t1 | sed -e 's/^C[0-9]*/CNUM/' >current &&
diff -u expected current'
-echo 'RNUM no-funny "tabs\tand spaces"' >expected
+echo 'RNUM no-funny "tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-diff-tree delete with-funny' \
'git-update-index --force-remove "$p0" &&
git-diff-index -M --name-status \
$t0 | sed -e 's/^R[0-9]*/RNUM/' >current &&
diff -u expected current'
-echo 'diff --git a/no-funny "b/tabs\tand spaces"
+echo 'diff --git a/no-funny "b/tabs\t,\" (dq) and spaces"
similarity index NUM%
rename from no-funny
-rename to "tabs\tand spaces"' >expected
+rename to "tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-diff-tree delete with-funny' \
'git-diff-index -M -p $t0 |
@@ -105,19 +105,19 @@
diff -u expected current'
chmod +x "$p1"
-echo 'diff --git a/no-funny "b/tabs\tand spaces"
+echo 'diff --git a/no-funny "b/tabs\t,\" (dq) and spaces"
old mode 100644
new mode 100755
similarity index NUM%
rename from no-funny
-rename to "tabs\tand spaces"' >expected
+rename to "tabs\t,\" (dq) and spaces"' >expected
test_expect_success 'git-diff-tree delete with-funny' \
'git-diff-index -M -p $t0 |
sed -e "s/index [0-9]*%/index NUM%/" >current &&
diff -u expected current'
-echo >expected ' "tabs\tand spaces"
+echo >expected ' "tabs\t,\" (dq) and spaces"
1 files changed, 0 insertions(+), 0 deletions(-)'
test_expect_success 'git-diff-tree rename with-funny applied' \
'git-diff-index -M -p $t0 |
@@ -125,7 +125,7 @@
diff -u expected current'
echo >expected ' no-funny
- "tabs\tand spaces"
+ "tabs\t,\" (dq) and spaces"
2 files changed, 3 insertions(+), 3 deletions(-)'
test_expect_success 'git-diff-tree delete with-funny applied' \
diff --git a/t/t5501-old-fetch-and-upload.sh b/t/t5501-old-fetch-and-upload.sh
index ada5130..596c88b 100755
--- a/t/t5501-old-fetch-and-upload.sh
+++ b/t/t5501-old-fetch-and-upload.sh
@@ -7,8 +7,9 @@
# an old counterpart
cd $(dirname $0) || exit 1
+: ${SHELL_PATH=/bin/sh}
-tmp=$(mktemp /tmp/tmp-XXXXXXXX)
+tmp=`pwd`/.tmp$$
retval=0
@@ -25,13 +26,17 @@
both) pgm="old-git-upload-pack"; replace="old-git-fetch-pack --exec=$pgm";;
esac
- if which $pgm 2>/dev/null; then
+ if where=`LANG=C LC_ALL=C which "$pgm" 2>/dev/null` &&
+ case "$where" in
+ "no "*) (exit 1) ;;
+ esac
+ then
echo "Testing with $pgm"
sed -e "s/git-fetch-pack/$replace/g" \
-e "s/# old fails/warn/" < t5500-fetch-pack.sh > $tmp
- sh $tmp || retval=$?
- rm $tmp
+ "$SHELL_PATH" "$tmp" || retval=$?
+ rm -f "$tmp"
test $retval != 0 && exit $retval
else
diff --git a/t/t6022-merge-rename.sh b/t/t6022-merge-rename.sh
new file mode 100755
index 0000000..153b9e4
--- /dev/null
+++ b/t/t6022-merge-rename.sh
@@ -0,0 +1,164 @@
+#!/bin/sh
+
+test_description='Merge-recursive merging renames'
+. ./test-lib.sh
+
+test_expect_success setup \
+'
+cat >A <<\EOF &&
+a aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+b bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb
+c cccccccccccccccccccccccccccccccccccccccccccccccc
+d dddddddddddddddddddddddddddddddddddddddddddddddd
+e eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
+f ffffffffffffffffffffffffffffffffffffffffffffffff
+g gggggggggggggggggggggggggggggggggggggggggggggggg
+h hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
+i iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
+j jjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj
+k kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkk
+l llllllllllllllllllllllllllllllllllllllllllllllll
+m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
+n nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn
+o oooooooooooooooooooooooooooooooooooooooooooooooo
+EOF
+
+cat >M <<\EOF &&
+A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+B BBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBBB
+C CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
+D DDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDDD
+E EEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE
+F FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
+G GGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGGG
+H HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
+I IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII
+J JJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJJ
+K KKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK
+L LLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLLL
+M MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM
+N NNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN
+O OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO
+EOF
+
+git add A M &&
+git commit -m initial &&
+git branch white &&
+git branch red &&
+git branch blue &&
+
+sed -e "/^g /s/.*/g : master changes a line/" <A >A+ &&
+mv A+ A &&
+git commit -a -m "master updates A" &&
+
+git checkout white &&
+sed -e "/^g /s/.*/g : white changes a line/" <A >B &&
+sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N &&
+rm -f A M &&
+git update-index --add --remove A B M N &&
+git commit -m "white renames A->B, M->N" &&
+
+git checkout red &&
+sed -e "/^g /s/.*/g : red changes a line/" <A >B &&
+sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N &&
+rm -f A M &&
+git update-index --add --remove A B M N &&
+git commit -m "red renames A->B, M->N" &&
+
+git checkout blue &&
+sed -e "/^g /s/.*/g : blue changes a line/" <A >C &&
+sed -e "/^G /s/.*/G : colored branch changes a line/" <M >N &&
+rm -f A M &&
+git update-index --add --remove A C M N &&
+git commit -m "blue renames A->C, M->N" &&
+
+git checkout master'
+
+test_expect_success 'pull renaming branch into unrenaming one' \
+'
+ git show-branch
+ git pull . white && {
+ echo "BAD: should have conflicted"
+ exit 1
+ }
+ git ls-files -s
+ test "$(git ls-files -u B | wc -l)" -eq 3 || {
+ echo "BAD: should have left stages for B"
+ exit 1
+ }
+ test "$(git ls-files -s N | wc -l)" -eq 1 || {
+ echo "BAD: should have merged N"
+ exit 1
+ }
+ sed -ne "/^g/{
+ p
+ q
+ }" B | grep master || {
+ echo "BAD: should have listed our change first"
+ exit 1
+ }
+ test "$(git diff white N | wc -l)" -eq 0 || {
+ echo "BAD: should have taken colored branch"
+ exit 1
+ }
+'
+
+test_expect_success 'pull renaming branch into another renaming one' \
+'
+ git reset --hard
+ git checkout red
+ git pull . white && {
+ echo "BAD: should have conflicted"
+ exit 1
+ }
+ test "$(git ls-files -u B | wc -l)" -eq 3 || {
+ echo "BAD: should have left stages"
+ exit 1
+ }
+ test "$(git ls-files -s N | wc -l)" -eq 1 || {
+ echo "BAD: should have merged N"
+ exit 1
+ }
+ sed -ne "/^g/{
+ p
+ q
+ }" B | grep red || {
+ echo "BAD: should have listed our change first"
+ exit 1
+ }
+ test "$(git diff white N | wc -l)" -eq 0 || {
+ echo "BAD: should have taken colored branch"
+ exit 1
+ }
+'
+
+test_expect_success 'pull unrenaming branch into renaming one' \
+'
+ git reset --hard
+ git show-branch
+ git pull . master && {
+ echo "BAD: should have conflicted"
+ exit 1
+ }
+ test "$(git ls-files -u B | wc -l)" -eq 3 || {
+ echo "BAD: should have left stages"
+ exit 1
+ }
+ test "$(git ls-files -s N | wc -l)" -eq 1 || {
+ echo "BAD: should have merged N"
+ exit 1
+ }
+ sed -ne "/^g/{
+ p
+ q
+ }" B | grep red || {
+ echo "BAD: should have listed our change first"
+ exit 1
+ }
+ test "$(git diff white N | wc -l)" -eq 0 || {
+ echo "BAD: should have taken colored branch"
+ exit 1
+ }
+'
+
+test_done
diff --git a/t/test-lib.sh b/t/test-lib.sh
index f2eccd7..2819bef 100755
--- a/t/test-lib.sh
+++ b/t/test-lib.sh
@@ -149,7 +149,7 @@
test_done () {
trap - exit
case "$test_failure" in
- 0)
+ 0)
# We could:
# cd .. && rm -fr trash
# but that means we forbid any tests that use their own
@@ -172,15 +172,30 @@
# t/ subdirectory and are run in trash subdirectory.
PATH=$(pwd)/..:$PATH
GIT_EXEC_PATH=$(pwd)/..
-export GIT_EXEC_PATH
+export PATH GIT_EXEC_PATH
+
+# Similarly use ../compat/subprocess.py if our python does not
+# have subprocess.py on its own.
+PYTHON=`sed -e '1{
+ s/^#!//
+ q
+}' ../git-merge-recursive` || {
+ error "You haven't built things yet, have you?"
+}
+"$PYTHON" -c 'import subprocess' 2>/dev/null || {
+ PYTHONPATH=$(pwd)/../compat
+ export PYTHONPATH
+}
+test -d ../templates/blt || {
+ error "You haven't built things yet, have you?"
+}
# Test repository
test=trash
rm -fr "$test"
mkdir "$test"
cd "$test"
-git-init-db --template=../../templates/blt/ 2>/dev/null ||
-error "cannot run git-init-db"
+"$GIT_EXEC_PATH/git" init-db --template=../../templates/blt/ 2>/dev/null ||
+error "cannot run git init-db -- have you built things yet?"
mv .git/hooks .git/hooks-disabled
-
diff --git a/tree.c b/tree.c
index 043f032..e7a7b71 100644
--- a/tree.c
+++ b/tree.c
@@ -200,7 +200,6 @@
}
if (obj)
n_refs++;
- entry->parent = NULL; /* needs to be filled by the user */
*list_p = entry;
list_p = &entry->next;
}
diff --git a/tree.h b/tree.h
index 768e5e9..57a5bf7 100644
--- a/tree.h
+++ b/tree.h
@@ -18,7 +18,6 @@
struct tree *tree;
struct blob *blob;
} item;
- struct tree_entry_list *parent;
};
struct tree {
diff --git a/update-index.c b/update-index.c
index 11b7f6a..be87b99 100644
--- a/update-index.c
+++ b/update-index.c
@@ -256,35 +256,30 @@
}
}
-static int add_cacheinfo(const char *arg1, const char *arg2, const char *arg3)
+static int add_cacheinfo(unsigned int mode, const unsigned char *sha1,
+ const char *path, int stage)
{
int size, len, option;
- unsigned int mode;
- unsigned char sha1[20];
struct cache_entry *ce;
- if (sscanf(arg1, "%o", &mode) != 1)
- return -1;
- if (get_sha1_hex(arg2, sha1))
- return -1;
- if (!verify_path(arg3))
+ if (!verify_path(path))
return -1;
- len = strlen(arg3);
+ len = strlen(path);
size = cache_entry_size(len);
ce = xmalloc(size);
memset(ce, 0, size);
memcpy(ce->sha1, sha1, 20);
- memcpy(ce->name, arg3, len);
- ce->ce_flags = htons(len);
+ memcpy(ce->name, path, len);
+ ce->ce_flags = create_ce_flags(len, stage);
ce->ce_mode = create_ce_mode(mode);
option = allow_add ? ADD_CACHE_OK_TO_ADD : 0;
option |= allow_replace ? ADD_CACHE_OK_TO_REPLACE : 0;
if (add_cache_entry(ce, option))
return error("%s: cannot add to the index - missing --add option?",
- arg3);
- report("add '%s'", arg3);
+ path);
+ report("add '%s'", path);
return 0;
}
@@ -342,7 +337,24 @@
char *path_name;
unsigned char sha1[20];
unsigned int mode;
+ int stage;
+ /* This reads lines formatted in one of three formats:
+ *
+ * (1) mode SP sha1 TAB path
+ * The first format is what "git-apply --index-info"
+ * reports, and used to reconstruct a partial tree
+ * that is used for phony merge base tree when falling
+ * back on 3-way merge.
+ *
+ * (2) mode SP type SP sha1 TAB path
+ * The second format is to stuff git-ls-tree output
+ * into the index file.
+ *
+ * (3) mode SP sha1 SP stage TAB path
+ * This format is to put higher order stages into the
+ * index file and matches git-ls-files --stage output.
+ */
read_line(&buf, stdin, line_termination);
if (buf.eof)
break;
@@ -354,9 +366,19 @@
tab = strchr(ptr, '\t');
if (!tab || tab - ptr < 41)
goto bad_line;
+
+ if (tab[-2] == ' ' && '1' <= tab[-1] && tab[-1] <= '3') {
+ stage = tab[-1] - '0';
+ ptr = tab + 1; /* point at the head of path */
+ tab = tab - 2; /* point at tail of sha1 */
+ }
+ else {
+ stage = 0;
+ ptr = tab + 1; /* point at the head of path */
+ }
+
if (get_sha1_hex(tab - 40, sha1) || tab[-41] != ' ')
goto bad_line;
- ptr = tab + 1;
if (line_termination && ptr[0] == '"')
path_name = unquote_c_style(ptr, NULL);
@@ -382,7 +404,7 @@
* ptr[-41] is at the beginning of sha1
*/
ptr[-42] = ptr[-1] = 0;
- if (add_cacheinfo(buf.buf, ptr-41, path_name))
+ if (add_cacheinfo(mode, sha1, path_name, stage))
die("git-update-index: unable to update %s",
path_name);
}
@@ -449,10 +471,17 @@
continue;
}
if (!strcmp(path, "--cacheinfo")) {
+ unsigned char sha1[20];
+ unsigned int mode;
+
if (i+3 >= argc)
die("git-update-index: --cacheinfo <mode> <sha1> <path>");
- if (add_cacheinfo(argv[i+1], argv[i+2], argv[i+3]))
- die("git-update-index: --cacheinfo cannot add %s", argv[i+3]);
+
+ if ((sscanf(argv[i+1], "%o", &mode) != 1) ||
+ get_sha1_hex(argv[i+2], sha1) ||
+ add_cacheinfo(mode, sha1, argv[i+3], 0))
+ die("git-update-index: --cacheinfo"
+ " cannot add %s", argv[i+3]);
i += 3;
continue;
}
diff --git a/usage.c b/usage.c
index dfa87fe..1fa924c 100644
--- a/usage.c
+++ b/usage.c
@@ -3,7 +3,7 @@
*
* Copyright (C) Linus Torvalds, 2005
*/
-#include "cache.h"
+#include "git-compat-util.h"
static void report(const char *prefix, const char *err, va_list params)
{
diff --git a/write-tree.c b/write-tree.c
index 0aac32f..f866059 100644
--- a/write-tree.c
+++ b/write-tree.c
@@ -83,6 +83,8 @@
return nr;
}
+static const char write_tree_usage[] = "git-write-tree [--missing-ok]";
+
int main(int argc, char **argv)
{
int i, funny;
@@ -96,7 +98,7 @@
if (!strcmp(argv[1], "--missing-ok"))
missing_ok = 1;
else
- die("unknown option %s", argv[1]);
+ die(write_tree_usage);
}
if (argc > 2)
