| git-for-each-ref(1) |
| =================== |
| |
| NAME |
| ---- |
| git-for-each-ref - Output information on each ref |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git for-each-ref' [--count=<count>] [--shell|--perl|--python|--tcl] |
| [(--sort=<key>)...] [--format=<format>] [<pattern>...] |
| [--points-at=<object>] |
| (--merged[=<object>] | --no-merged[=<object>]) |
| [--contains[=<object>]] [--no-contains[=<object>]] |
| |
| DESCRIPTION |
| ----------- |
| |
| Iterate over all refs that match `<pattern>` and show them |
| according to the given `<format>`, after sorting them according |
| to the given set of `<key>`. If `<count>` is given, stop after |
| showing that many refs. The interpolated values in `<format>` |
| can optionally be quoted as string literals in the specified |
| host language allowing their direct evaluation in that language. |
| |
| OPTIONS |
| ------- |
| <pattern>...:: |
| If one or more patterns are given, only refs are shown that |
| match against at least one pattern, either using fnmatch(3) or |
| literally, in the latter case matching completely or from the |
| beginning up to a slash. |
| |
| --count=<count>:: |
| By default the command shows all refs that match |
| `<pattern>`. This option makes it stop after showing |
| that many refs. |
| |
| --sort=<key>:: |
| A field name to sort on. Prefix `-` to sort in |
| descending order of the value. When unspecified, |
| `refname` is used. You may use the --sort=<key> option |
| multiple times, in which case the last key becomes the primary |
| key. |
| |
| --format=<format>:: |
| A string that interpolates `%(fieldname)` from a ref being shown |
| and the object it points at. If `fieldname` |
| is prefixed with an asterisk (`*`) and the ref points |
| at a tag object, use the value for the field in the object |
| which the tag object refers to (instead of the field in the tag object). |
| When unspecified, `<format>` defaults to |
| `%(objectname) SPC %(objecttype) TAB %(refname)`. |
| It also interpolates `%%` to `%`, and `%xx` where `xx` |
| are hex digits interpolates to character with hex code |
| `xx`; for example `%00` interpolates to `\0` (NUL), |
| `%09` to `\t` (TAB) and `%0a` to `\n` (LF). |
| |
| --color[=<when>]: |
| Respect any colors specified in the `--format` option. The |
| `<when>` field must be one of `always`, `never`, or `auto` (if |
| `<when>` is absent, behave as if `always` was given). |
| |
| --shell:: |
| --perl:: |
| --python:: |
| --tcl:: |
| If given, strings that substitute `%(fieldname)` |
| placeholders are quoted as string literals suitable for |
| the specified host language. This is meant to produce |
| a scriptlet that can directly be `eval`ed. |
| |
| --points-at=<object>:: |
| Only list refs which points at the given object. |
| |
| --merged[=<object>]:: |
| Only list refs whose tips are reachable from the |
| specified commit (HEAD if not specified), |
| incompatible with `--no-merged`. |
| |
| --no-merged[=<object>]:: |
| Only list refs whose tips are not reachable from the |
| specified commit (HEAD if not specified), |
| incompatible with `--merged`. |
| |
| --contains[=<object>]:: |
| Only list refs which contain the specified commit (HEAD if not |
| specified). |
| |
| --no-contains[=<object>]:: |
| Only list refs which don't contain the specified commit (HEAD |
| if not specified). |
| |
| --ignore-case:: |
| Sorting and filtering refs are case insensitive. |
| |
| FIELD NAMES |
| ----------- |
| |
| Various values from structured fields in referenced objects can |
| be used to interpolate into the resulting output, or as sort |
| keys. |
| |
| For all objects, the following names can be used: |
| |
| refname:: |
| The name of the ref (the part after $GIT_DIR/). |
| For a non-ambiguous short name of the ref append `:short`. |
| The option core.warnAmbiguousRefs is used to select the strict |
| abbreviation mode. If `lstrip=<N>` (`rstrip=<N>`) is appended, strips `<N>` |
| slash-separated path components from the front (back) of the refname |
| (e.g. `%(refname:lstrip=2)` turns `refs/tags/foo` into `foo` and |
| `%(refname:rstrip=2)` turns `refs/tags/foo` into `refs`). |
| If `<N>` is a negative number, strip as many path components as |
| necessary from the specified end to leave `-<N>` path components |
| (e.g. `%(refname:lstrip=-2)` turns |
| `refs/tags/foo` into `tags/foo` and `%(refname:rstrip=-1)` |
| turns `refs/tags/foo` into `refs`). When the ref does not have |
| enough components, the result becomes an empty string if |
| stripping with positive <N>, or it becomes the full refname if |
| stripping with negative <N>. Neither is an error. |
| + |
| `strip` can be used as a synomym to `lstrip`. |
| |
| objecttype:: |
| The type of the object (`blob`, `tree`, `commit`, `tag`). |
| |
| objectsize:: |
| The size of the object (the same as 'git cat-file -s' reports). |
| |
| objectname:: |
| The object name (aka SHA-1). |
| For a non-ambiguous abbreviation of the object name append `:short`. |
| For an abbreviation of the object name with desired length append |
| `:short=<length>`, where the minimum length is MINIMUM_ABBREV. The |
| length may be exceeded to ensure unique object names. |
| |
| upstream:: |
| The name of a local ref which can be considered ``upstream'' |
| from the displayed ref. Respects `:short`, `:lstrip` and |
| `:rstrip` in the same way as `refname` above. Additionally |
| respects `:track` to show "[ahead N, behind M]" and |
| `:trackshort` to show the terse version: ">" (ahead), "<" |
| (behind), "<>" (ahead and behind), or "=" (in sync). `:track` |
| also prints "[gone]" whenever unknown upstream ref is |
| encountered. Append `:track,nobracket` to show tracking |
| information without brackets (i.e "ahead N, behind M"). |
| + |
| For any remote-tracking branch `%(upstream)`, `%(upstream:remotename)` |
| and `%(upstream:remoteref)` refer to the name of the remote and the |
| name of the tracked remote ref, respectively. In other words, the |
| remote-tracking branch can be updated explicitly and individually by |
| using the refspec `%(upstream:remoteref):%(upstream)` to fetch from |
| `%(upstream:remotename)`. |
| + |
| Has no effect if the ref does not have tracking information associated |
| with it. All the options apart from `nobracket` are mutually exclusive, |
| but if used together the last option is selected. |
| |
| push:: |
| The name of a local ref which represents the `@{push}` |
| location for the displayed ref. Respects `:short`, `:lstrip`, |
| `:rstrip`, `:track`, `:trackshort`, `:remotename`, and `:remoteref` |
| options as `upstream` does. Produces an empty string if no `@{push}` |
| ref is configured. |
| |
| HEAD:: |
| '*' if HEAD matches current ref (the checked out branch), ' ' |
| otherwise. |
| |
| color:: |
| Change output color. Followed by `:<colorname>`, where color |
| names are described under Values in the "CONFIGURATION FILE" |
| section of linkgit:git-config[1]. For example, |
| `%(color:bold red)`. |
| |
| align:: |
| Left-, middle-, or right-align the content between |
| %(align:...) and %(end). The "align:" is followed by |
| `width=<width>` and `position=<position>` in any order |
| separated by a comma, where the `<position>` is either left, |
| right or middle, default being left and `<width>` is the total |
| length of the content with alignment. For brevity, the |
| "width=" and/or "position=" prefixes may be omitted, and bare |
| <width> and <position> used instead. For instance, |
| `%(align:<width>,<position>)`. If the contents length is more |
| than the width then no alignment is performed. If used with |
| `--quote` everything in between %(align:...) and %(end) is |
| quoted, but if nested then only the topmost level performs |
| quoting. |
| |
| if:: |
| Used as %(if)...%(then)...%(end) or |
| %(if)...%(then)...%(else)...%(end). If there is an atom with |
| value or string literal after the %(if) then everything after |
| the %(then) is printed, else if the %(else) atom is used, then |
| everything after %(else) is printed. We ignore space when |
| evaluating the string before %(then), this is useful when we |
| use the %(HEAD) atom which prints either "*" or " " and we |
| want to apply the 'if' condition only on the 'HEAD' ref. |
| Append ":equals=<string>" or ":notequals=<string>" to compare |
| the value between the %(if:...) and %(then) atoms with the |
| given string. |
| |
| symref:: |
| The ref which the given symbolic ref refers to. If not a |
| symbolic ref, nothing is printed. Respects the `:short`, |
| `:lstrip` and `:rstrip` options in the same way as `refname` |
| above. |
| |
| In addition to the above, for commit and tag objects, the header |
| field names (`tree`, `parent`, `object`, `type`, and `tag`) can |
| be used to specify the value in the header field. |
| |
| For commit and tag objects, the special `creatordate` and `creator` |
| fields will correspond to the appropriate date or name-email-date tuple |
| from the `committer` or `tagger` fields depending on the object type. |
| These are intended for working on a mix of annotated and lightweight tags. |
| |
| Fields that have name-email-date tuple as its value (`author`, |
| `committer`, and `tagger`) can be suffixed with `name`, `email`, |
| and `date` to extract the named component. |
| |
| The complete message in a commit and tag object is `contents`. |
| Its first line is `contents:subject`, where subject is the concatenation |
| of all lines of the commit message up to the first blank line. The next |
| line is `contents:body`, where body is all of the lines after the first |
| blank line. The optional GPG signature is `contents:signature`. The |
| first `N` lines of the message is obtained using `contents:lines=N`. |
| Additionally, the trailers as interpreted by linkgit:git-interpret-trailers[1] |
| are obtained as `trailers` (or by using the historical alias |
| `contents:trailers`). Non-trailer lines from the trailer block can be omitted |
| with `trailers:only`. Whitespace-continuations can be removed from trailers so |
| that each trailer appears on a line by itself with its full content with |
| `trailers:unfold`. Both can be used together as `trailers:unfold,only`. |
| |
| For sorting purposes, fields with numeric values sort in numeric order |
| (`objectsize`, `authordate`, `committerdate`, `creatordate`, `taggerdate`). |
| All other fields are used to sort in their byte-value order. |
| |
| There is also an option to sort by versions, this can be done by using |
| the fieldname `version:refname` or its alias `v:refname`. |
| |
| In any case, a field name that refers to a field inapplicable to |
| the object referred by the ref does not cause an error. It |
| returns an empty string instead. |
| |
| As a special case for the date-type fields, you may specify a format for |
| the date by adding `:` followed by date format name (see the |
| values the `--date` option to linkgit:git-rev-list[1] takes). |
| |
| Some atoms like %(align) and %(if) always require a matching %(end). |
| We call them "opening atoms" and sometimes denote them as %($open). |
| |
| When a scripting language specific quoting is in effect, everything |
| between a top-level opening atom and its matching %(end) is evaluated |
| according to the semantics of the opening atom and only its result |
| from the top-level is quoted. |
| |
| |
| EXAMPLES |
| -------- |
| |
| An example directly producing formatted text. Show the most recent |
| 3 tagged commits: |
| |
| ------------ |
| #!/bin/sh |
| |
| git for-each-ref --count=3 --sort='-*authordate' \ |
| --format='From: %(*authorname) %(*authoremail) |
| Subject: %(*subject) |
| Date: %(*authordate) |
| Ref: %(*refname) |
| |
| %(*body) |
| ' 'refs/tags' |
| ------------ |
| |
| |
| A simple example showing the use of shell eval on the output, |
| demonstrating the use of --shell. List the prefixes of all heads: |
| ------------ |
| #!/bin/sh |
| |
| git for-each-ref --shell --format="ref=%(refname)" refs/heads | \ |
| while read entry |
| do |
| eval "$entry" |
| echo `dirname $ref` |
| done |
| ------------ |
| |
| |
| A bit more elaborate report on tags, demonstrating that the format |
| may be an entire script: |
| ------------ |
| #!/bin/sh |
| |
| fmt=' |
| r=%(refname) |
| t=%(*objecttype) |
| T=${r#refs/tags/} |
| |
| o=%(*objectname) |
| n=%(*authorname) |
| e=%(*authoremail) |
| s=%(*subject) |
| d=%(*authordate) |
| b=%(*body) |
| |
| kind=Tag |
| if test "z$t" = z |
| then |
| # could be a lightweight tag |
| t=%(objecttype) |
| kind="Lightweight tag" |
| o=%(objectname) |
| n=%(authorname) |
| e=%(authoremail) |
| s=%(subject) |
| d=%(authordate) |
| b=%(body) |
| fi |
| echo "$kind $T points at a $t object $o" |
| if test "z$t" = zcommit |
| then |
| echo "The commit was authored by $n $e |
| at $d, and titled |
| |
| $s |
| |
| Its message reads as: |
| " |
| echo "$b" | sed -e "s/^/ /" |
| echo |
| fi |
| ' |
| |
| eval=`git for-each-ref --shell --format="$fmt" \ |
| --sort='*objecttype' \ |
| --sort=-taggerdate \ |
| refs/tags` |
| eval "$eval" |
| ------------ |
| |
| |
| An example to show the usage of %(if)...%(then)...%(else)...%(end). |
| This prefixes the current branch with a star. |
| |
| ------------ |
| git for-each-ref --format="%(if)%(HEAD)%(then)* %(else) %(end)%(refname:short)" refs/heads/ |
| ------------ |
| |
| |
| An example to show the usage of %(if)...%(then)...%(end). |
| This prints the authorname, if present. |
| |
| ------------ |
| git for-each-ref --format="%(refname)%(if)%(authorname)%(then) Authored by: %(authorname)%(end)" |
| ------------ |
| |
| SEE ALSO |
| -------- |
| linkgit:git-show-ref[1] |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |