Documentation/config/http.txt - jrn/git - Git at Google

 http.proxy::
 	Override the HTTP proxy, normally configured using the 'http_proxy',
 	'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In
 	addition to the syntax understood by curl, it is possible to specify a
 	proxy string with a user name but no password, in which case git will
 	attempt to acquire one in the same way it does for other credentials. See
 	linkgit:gitcredentials[7] for more information. The syntax thus is
 	'[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden
 	on a per-remote basis; see remote.<name>.proxy

 http.proxyAuthMethod::
 	Set the method with which to authenticate against the HTTP proxy. This
 	only takes effect if the configured proxy string contains a user name part
 	(i.e. is of the form 'user@host' or 'user@host:port'). This can be
 	overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`.
 	Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment
 	variable.  Possible values are:
 +
 --
 * `anyauth` - Automatically pick a suitable authentication method. It is
   assumed that the proxy answers an unauthenticated request with a 407
   status code and one or more Proxy-authenticate headers with supported
   authentication methods. This is the default.
 * `basic` - HTTP Basic authentication
 * `digest` - HTTP Digest authentication; this prevents the password from being
   transmitted to the proxy in clear text
 * `negotiate` - GSS-Negotiate authentication (compare the --negotiate option
   of `curl(1)`)
 * `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`)
 --

 http.proxySSLCert::
 	The pathname of a file that stores a client certificate to use to authenticate
 	with an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_CERT` environment
 	variable.

 http.proxySSLKey::
 	The pathname of a file that stores a private key to use to authenticate with
 	an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_KEY` environment
 	variable.

 http.proxySSLCertPasswordProtected::
 	Enable Git's password prompt for the proxy SSL certificate.  Otherwise OpenSSL
 	will prompt the user, possibly many times, if the certificate or private key
 	is encrypted. Can be overridden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED`
 	environment variable.

 http.proxySSLCAInfo::
 	Pathname to the file containing the certificate bundle that should be used to
 	verify the proxy with when using an HTTPS proxy. Can be overridden by the
 	`GIT_PROXY_SSL_CAINFO` environment variable.

 http.emptyAuth::
 	Attempt authentication without seeking a username or password.  This
 	can be used to attempt GSS-Negotiate authentication without specifying
 	a username in the URL, as libcurl normally requires a username for
 	authentication.

 http.delegation::
 	Control GSSAPI credential delegation. The delegation is disabled
 	by default in libcurl since version 7.21.7. Set parameter to tell
 	the server what it is allowed to delegate when it comes to user
 	credentials. Used with GSS/kerberos. Possible values are:
 +
 --
 * `none` - Don't allow any delegation.
 * `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
   Kerberos service ticket, which is a matter of realm policy.
 * `always` - Unconditionally allow the server to delegate.
 --


 http.extraHeader::
 	Pass an additional HTTP header when communicating with a server.  If
 	more than one such entry exists, all of them are added as extra
 	headers.  To allow overriding the settings inherited from the system
 	config, an empty value will reset the extra headers to the empty list.

 http.cookieFile::
 	The pathname of a file containing previously stored cookie lines,
 	which should be used
 	in the Git http session, if they match the server. The file format
 	of the file to read cookies from should be plain HTTP headers or
 	the Netscape/Mozilla cookie file format (see `curl(1)`).
 	NOTE that the file specified with http.cookieFile is used only as
 	input unless http.saveCookies is set.

 http.saveCookies::
 	If set, store cookies received during requests to the file specified by
 	http.cookieFile. Has no effect if http.cookieFile is unset.

 http.version::
 	Use the specified HTTP protocol version when communicating with a server.
 	If you want to force the default. The available and default version depend
 	on libcurl. Currently the possible values of
 	this option are:

 	- HTTP/2
 	- HTTP/1.1

 http.curloptResolve::
 	Hostname resolution information that will be used first by
 	libcurl when sending HTTP requests.  This information should
 	be in one of the following formats:

 	- [+]HOST:PORT:ADDRESS[,ADDRESS]
 	- -HOST:PORT

 +
 The first format redirects all requests to the given `HOST:PORT`
 to the provided `ADDRESS`(s). The second format clears all
 previous config values for that `HOST:PORT` combination.  To
 allow easy overriding of all the settings inherited from the
 system config, an empty value will reset all resolution
 information to the empty list.

 http.sslVersion::
 	The SSL version to use when negotiating an SSL connection, if you
 	want to force the default.  The available and default version
 	depend on whether libcurl was built against NSS or OpenSSL and the
 	particular configuration of the crypto library in use. Internally
 	this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl
 	documentation for more details on the format of this option and
 	for the ssl version supported. Currently the possible values of
 	this option are:

 	- sslv2
 	- sslv3
 	- tlsv1
 	- tlsv1.0
 	- tlsv1.1
 	- tlsv1.2
 	- tlsv1.3

 +
 Can be overridden by the `GIT_SSL_VERSION` environment variable.
 To force git to use libcurl's default ssl version and ignore any
 explicit http.sslversion option, set `GIT_SSL_VERSION` to the
 empty string.

 http.sslCipherList::
   A list of SSL ciphers to use when negotiating an SSL connection.
   The available ciphers depend on whether libcurl was built against
   NSS or OpenSSL and the particular configuration of the crypto
   library in use.  Internally this sets the 'CURLOPT_SSL_CIPHER_LIST'
   option; see the libcurl documentation for more details on the format
   of this list.
 +
 Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable.
 To force git to use libcurl's default cipher list and ignore any
 explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the
 empty string.

 http.sslVerify::
 	Whether to verify the SSL certificate when fetching or pushing
 	over HTTPS. Defaults to true. Can be overridden by the
 	`GIT_SSL_NO_VERIFY` environment variable.

 http.sslCert::
 	File containing the SSL certificate when fetching or pushing
 	over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment
 	variable.

 http.sslKey::
 	File containing the SSL private key when fetching or pushing
 	over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment
 	variable.

 http.sslCertPasswordProtected::
 	Enable Git's password prompt for the SSL certificate.  Otherwise
 	OpenSSL will prompt the user, possibly many times, if the
 	certificate or private key is encrypted.  Can be overridden by the
 	`GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable.

 http.sslCAInfo::
 	File containing the certificates to verify the peer with when
 	fetching or pushing over HTTPS. Can be overridden by the
 	`GIT_SSL_CAINFO` environment variable.

 http.sslCAPath::
 	Path containing files with the CA certificates to verify the peer
 	with when fetching or pushing over HTTPS. Can be overridden
 	by the `GIT_SSL_CAPATH` environment variable.

 http.sslBackend::
 	Name of the SSL backend to use (e.g. "openssl" or "schannel").
 	This option is ignored if cURL lacks support for choosing the SSL
 	backend at runtime.

 http.schannelCheckRevoke::
 	Used to enforce or disable certificate revocation checks in cURL
 	when http.sslBackend is set to "schannel". Defaults to `true` if
 	unset. Only necessary to disable this if Git consistently errors
 	and the message is about checking the revocation status of a
 	certificate. This option is ignored if cURL lacks support for
 	setting the relevant SSL option at runtime.

 http.schannelUseSSLCAInfo::
 	As of cURL v7.60.0, the Secure Channel backend can use the
 	certificate bundle provided via `http.sslCAInfo`, but that would
 	override the Windows Certificate Store. Since this is not desirable
 	by default, Git will tell cURL not to use that bundle by default
 	when the `schannel` backend was configured via `http.sslBackend`,
 	unless `http.schannelUseSSLCAInfo` overrides this behavior.

 http.pinnedPubkey::
 	Public key of the https service. It may either be the filename of
 	a PEM or DER encoded public key file or a string starting with
 	'sha256//' followed by the base64 encoded sha256 hash of the
 	public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will
 	exit with an error if this option is set but not supported by
 	cURL.

 http.sslTry::
 	Attempt to use AUTH SSL/TLS and encrypted data transfers
 	when connecting via regular FTP protocol. This might be needed
 	if the FTP server requires it for security reasons or you wish
 	to connect securely whenever remote FTP server supports it.
 	Default is false since it might trigger certificate verification
 	errors on misconfigured servers.

 http.maxRequests::
 	How many HTTP requests to launch in parallel. Can be overridden
 	by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5.

 http.minSessions::
 	The number of curl sessions (counted across slots) to be kept across
 	requests. They will not be ended with curl_easy_cleanup() until
 	http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
 	value will be capped at 1. Defaults to 1.

 http.postBuffer::
 	Maximum size in bytes of the buffer used by smart HTTP
 	transports when POSTing data to the remote system.
 	For requests larger than this buffer size, HTTP/1.1 and
 	Transfer-Encoding: chunked is used to avoid creating a
 	massive pack file locally.  Default is 1 MiB, which is
 	sufficient for most requests.
 +
 Note that raising this limit is only effective for disabling chunked
 transfer encoding and therefore should be used only where the remote
 server or a proxy only supports HTTP/1.0 or is noncompliant with the
 HTTP standard.  Raising this is not, in general, an effective solution
 for most push problems, but can increase memory consumption
 significantly since the entire buffer is allocated even for small
 pushes.

 http.lowSpeedLimit, http.lowSpeedTime::
 	If the HTTP transfer speed is less than 'http.lowSpeedLimit'
 	for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
 	Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and
 	`GIT_HTTP_LOW_SPEED_TIME` environment variables.

 http.noEPSV::
 	A boolean which disables using of EPSV ftp command by curl.
 	This can helpful with some "poor" ftp servers which don't
 	support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV`
 	environment variable. Default is false (curl will use EPSV).

 http.userAgent::
 	The HTTP USER_AGENT string presented to an HTTP server.  The default
 	value represents the version of the client Git such as git/1.7.1.
 	This option allows you to override this value to a more common value
 	such as Mozilla/4.0.  This may be necessary, for instance, if
 	connecting through a firewall that restricts HTTP connections to a set
 	of common USER_AGENT strings (but not including those like git/1.7.1).
 	Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.

 http.followRedirects::
 	Whether git should follow HTTP redirects. If set to `true`, git
 	will transparently follow any redirect issued by a server it
 	encounters. If set to `false`, git will treat all redirects as
 	errors. If set to `initial`, git will follow redirects only for
 	the initial request to a remote, but not for subsequent
 	follow-up HTTP requests. Since git uses the redirected URL as
 	the base for the follow-up requests, this is generally
 	sufficient. The default is `initial`.

 http.<url>.*::
 	Any of the http.* options above can be applied selectively to some URLs.
 	For a config key to match a URL, each element of the config key is
 	compared to that of the URL, in the following order:
 +
 --
 . Scheme (e.g., `https` in `https://example.com/`). This field
   must match exactly between the config key and the URL.

 . Host/domain name (e.g., `example.com` in `https://example.com/`).
   This field must match between the config key and the URL. It is
   possible to specify a `*` as part of the host name to match all subdomains
   at this level. `https://*.example.com/` for example would match
   `https://foo.example.com/`, but not `https://foo.bar.example.com/`.

 . Port number (e.g., `8080` in `http://example.com:8080/`).
   This field must match exactly between the config key and the URL.
   Omitted port numbers are automatically converted to the correct
   default for the scheme before matching.

 . Path (e.g., `repo.git` in `https://example.com/repo.git`). The
   path field of the config key must match the path field of the URL
   either exactly or as a prefix of slash-delimited path elements.  This means
   a config key with path `foo/` matches URL path `foo/bar`.  A prefix can only
   match on a slash (`/`) boundary.  Longer matches take precedence (so a config
   key with path `foo/bar` is a better match to URL path `foo/bar` than a config
   key with just path `foo/`).

 . User name (e.g., `user` in `https://user@example.com/repo.git`). If
   the config key has a user name it must match the user name in the
   URL exactly. If the config key does not have a user name, that
   config key will match a URL with any user name (including none),
   but at a lower precedence than a config key with a user name.
 --
 +
 The list above is ordered by decreasing precedence; a URL that matches
 a config key's path is preferred to one that matches its user name. For example,
 if the URL is `https://user@example.com/foo/bar` a config key match of
 `https://example.com/foo` will be preferred over a config key match of
 `https://user@example.com`.
 +
 All URLs are normalized before attempting any matching (the password part,
 if embedded in the URL, is always ignored for matching purposes) so that
 equivalent URLs that are simply spelled differently will match properly.
 Environment variable settings always override any matches.  The URLs that are
 matched against are those given directly to Git commands.  This means any URLs
 visited as a result of a redirection do not participate in matching.
	http.proxy::
	Override the HTTP proxy, normally configured using the 'http_proxy',
	'https_proxy', and 'all_proxy' environment variables (see `curl(1)`). In
	addition to the syntax understood by curl, it is possible to specify a
	proxy string with a user name but no password, in which case git will
	attempt to acquire one in the same way it does for other credentials. See
	linkgit:gitcredentials[7] for more information. The syntax thus is
	'[protocol://][user[:password]@]proxyhost[:port]'. This can be overridden
	on a per-remote basis; see remote.<name>.proxy

	http.proxyAuthMethod::
	Set the method with which to authenticate against the HTTP proxy. This
	only takes effect if the configured proxy string contains a user name part
	(i.e. is of the form 'user@host' or 'user@host:port'). This can be
	overridden on a per-remote basis; see `remote.<name>.proxyAuthMethod`.
	Both can be overridden by the `GIT_HTTP_PROXY_AUTHMETHOD` environment
	variable. Possible values are:
	+
	--
	* `anyauth` - Automatically pick a suitable authentication method. It is
	assumed that the proxy answers an unauthenticated request with a 407
	status code and one or more Proxy-authenticate headers with supported
	authentication methods. This is the default.
	* `basic` - HTTP Basic authentication
	* `digest` - HTTP Digest authentication; this prevents the password from being
	transmitted to the proxy in clear text
	* `negotiate` - GSS-Negotiate authentication (compare the --negotiate option
	of `curl(1)`)
	* `ntlm` - NTLM authentication (compare the --ntlm option of `curl(1)`)
	--

	http.proxySSLCert::
	The pathname of a file that stores a client certificate to use to authenticate
	with an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_CERT` environment
	variable.

	http.proxySSLKey::
	The pathname of a file that stores a private key to use to authenticate with
	an HTTPS proxy. Can be overridden by the `GIT_PROXY_SSL_KEY` environment
	variable.

	http.proxySSLCertPasswordProtected::
	Enable Git's password prompt for the proxy SSL certificate. Otherwise OpenSSL
	will prompt the user, possibly many times, if the certificate or private key
	is encrypted. Can be overridden by the `GIT_PROXY_SSL_CERT_PASSWORD_PROTECTED`
	environment variable.

	http.proxySSLCAInfo::
	Pathname to the file containing the certificate bundle that should be used to
	verify the proxy with when using an HTTPS proxy. Can be overridden by the
	`GIT_PROXY_SSL_CAINFO` environment variable.

	http.emptyAuth::
	Attempt authentication without seeking a username or password. This
	can be used to attempt GSS-Negotiate authentication without specifying
	a username in the URL, as libcurl normally requires a username for
	authentication.

	http.delegation::
	Control GSSAPI credential delegation. The delegation is disabled
	by default in libcurl since version 7.21.7. Set parameter to tell
	the server what it is allowed to delegate when it comes to user
	credentials. Used with GSS/kerberos. Possible values are:
	+
	--
	* `none` - Don't allow any delegation.
	* `policy` - Delegates if and only if the OK-AS-DELEGATE flag is set in the
	Kerberos service ticket, which is a matter of realm policy.
	* `always` - Unconditionally allow the server to delegate.
	--


	http.extraHeader::
	Pass an additional HTTP header when communicating with a server. If
	more than one such entry exists, all of them are added as extra
	headers. To allow overriding the settings inherited from the system
	config, an empty value will reset the extra headers to the empty list.

	http.cookieFile::
	The pathname of a file containing previously stored cookie lines,
	which should be used
	in the Git http session, if they match the server. The file format
	of the file to read cookies from should be plain HTTP headers or
	the Netscape/Mozilla cookie file format (see `curl(1)`).
	NOTE that the file specified with http.cookieFile is used only as
	input unless http.saveCookies is set.

	http.saveCookies::
	If set, store cookies received during requests to the file specified by
	http.cookieFile. Has no effect if http.cookieFile is unset.

	http.version::
	Use the specified HTTP protocol version when communicating with a server.
	If you want to force the default. The available and default version depend
	on libcurl. Currently the possible values of
	this option are:

	- HTTP/2
	- HTTP/1.1

	http.curloptResolve::
	Hostname resolution information that will be used first by
	libcurl when sending HTTP requests. This information should
	be in one of the following formats:

	- [+]HOST:PORT:ADDRESS[,ADDRESS]
	- -HOST:PORT

	+
	The first format redirects all requests to the given `HOST:PORT`
	to the provided `ADDRESS`(s). The second format clears all
	previous config values for that `HOST:PORT` combination. To
	allow easy overriding of all the settings inherited from the
	system config, an empty value will reset all resolution
	information to the empty list.

	http.sslVersion::
	The SSL version to use when negotiating an SSL connection, if you
	want to force the default. The available and default version
	depend on whether libcurl was built against NSS or OpenSSL and the
	particular configuration of the crypto library in use. Internally
	this sets the 'CURLOPT_SSL_VERSION' option; see the libcurl
	documentation for more details on the format of this option and
	for the ssl version supported. Currently the possible values of
	this option are:

	- sslv2
	- sslv3
	- tlsv1
	- tlsv1.0
	- tlsv1.1
	- tlsv1.2
	- tlsv1.3

	+
	Can be overridden by the `GIT_SSL_VERSION` environment variable.
	To force git to use libcurl's default ssl version and ignore any
	explicit http.sslversion option, set `GIT_SSL_VERSION` to the
	empty string.

	http.sslCipherList::
	A list of SSL ciphers to use when negotiating an SSL connection.
	The available ciphers depend on whether libcurl was built against
	NSS or OpenSSL and the particular configuration of the crypto
	library in use. Internally this sets the 'CURLOPT_SSL_CIPHER_LIST'
	option; see the libcurl documentation for more details on the format
	of this list.
	+
	Can be overridden by the `GIT_SSL_CIPHER_LIST` environment variable.
	To force git to use libcurl's default cipher list and ignore any
	explicit http.sslCipherList option, set `GIT_SSL_CIPHER_LIST` to the
	empty string.

	http.sslVerify::
	Whether to verify the SSL certificate when fetching or pushing
	over HTTPS. Defaults to true. Can be overridden by the
	`GIT_SSL_NO_VERIFY` environment variable.

	http.sslCert::
	File containing the SSL certificate when fetching or pushing
	over HTTPS. Can be overridden by the `GIT_SSL_CERT` environment
	variable.

	http.sslKey::
	File containing the SSL private key when fetching or pushing
	over HTTPS. Can be overridden by the `GIT_SSL_KEY` environment
	variable.

	http.sslCertPasswordProtected::
	Enable Git's password prompt for the SSL certificate. Otherwise
	OpenSSL will prompt the user, possibly many times, if the
	certificate or private key is encrypted. Can be overridden by the
	`GIT_SSL_CERT_PASSWORD_PROTECTED` environment variable.

	http.sslCAInfo::
	File containing the certificates to verify the peer with when
	fetching or pushing over HTTPS. Can be overridden by the
	`GIT_SSL_CAINFO` environment variable.

	http.sslCAPath::
	Path containing files with the CA certificates to verify the peer
	with when fetching or pushing over HTTPS. Can be overridden
	by the `GIT_SSL_CAPATH` environment variable.

	http.sslBackend::
	Name of the SSL backend to use (e.g. "openssl" or "schannel").
	This option is ignored if cURL lacks support for choosing the SSL
	backend at runtime.

	http.schannelCheckRevoke::
	Used to enforce or disable certificate revocation checks in cURL
	when http.sslBackend is set to "schannel". Defaults to `true` if
	unset. Only necessary to disable this if Git consistently errors
	and the message is about checking the revocation status of a
	certificate. This option is ignored if cURL lacks support for
	setting the relevant SSL option at runtime.

	http.schannelUseSSLCAInfo::
	As of cURL v7.60.0, the Secure Channel backend can use the
	certificate bundle provided via `http.sslCAInfo`, but that would
	override the Windows Certificate Store. Since this is not desirable
	by default, Git will tell cURL not to use that bundle by default
	when the `schannel` backend was configured via `http.sslBackend`,
	unless `http.schannelUseSSLCAInfo` overrides this behavior.

	http.pinnedPubkey::
	Public key of the https service. It may either be the filename of
	a PEM or DER encoded public key file or a string starting with
	'sha256//' followed by the base64 encoded sha256 hash of the
	public key. See also libcurl 'CURLOPT_PINNEDPUBLICKEY'. git will
	exit with an error if this option is set but not supported by
	cURL.

	http.sslTry::
	Attempt to use AUTH SSL/TLS and encrypted data transfers
	when connecting via regular FTP protocol. This might be needed
	if the FTP server requires it for security reasons or you wish
	to connect securely whenever remote FTP server supports it.
	Default is false since it might trigger certificate verification
	errors on misconfigured servers.

	http.maxRequests::
	How many HTTP requests to launch in parallel. Can be overridden
	by the `GIT_HTTP_MAX_REQUESTS` environment variable. Default is 5.

	http.minSessions::
	The number of curl sessions (counted across slots) to be kept across
	requests. They will not be ended with curl_easy_cleanup() until
	http_cleanup() is invoked. If USE_CURL_MULTI is not defined, this
	value will be capped at 1. Defaults to 1.

	http.postBuffer::
	Maximum size in bytes of the buffer used by smart HTTP
	transports when POSTing data to the remote system.
	For requests larger than this buffer size, HTTP/1.1 and
	Transfer-Encoding: chunked is used to avoid creating a
	massive pack file locally. Default is 1 MiB, which is
	sufficient for most requests.
	+
	Note that raising this limit is only effective for disabling chunked
	transfer encoding and therefore should be used only where the remote
	server or a proxy only supports HTTP/1.0 or is noncompliant with the
	HTTP standard. Raising this is not, in general, an effective solution
	for most push problems, but can increase memory consumption
	significantly since the entire buffer is allocated even for small
	pushes.

	http.lowSpeedLimit, http.lowSpeedTime::
	If the HTTP transfer speed is less than 'http.lowSpeedLimit'
	for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
	Can be overridden by the `GIT_HTTP_LOW_SPEED_LIMIT` and
	`GIT_HTTP_LOW_SPEED_TIME` environment variables.

	http.noEPSV::
	A boolean which disables using of EPSV ftp command by curl.
	This can helpful with some "poor" ftp servers which don't
	support EPSV mode. Can be overridden by the `GIT_CURL_FTP_NO_EPSV`
	environment variable. Default is false (curl will use EPSV).

	http.userAgent::
	The HTTP USER_AGENT string presented to an HTTP server. The default
	value represents the version of the client Git such as git/1.7.1.
	This option allows you to override this value to a more common value
	such as Mozilla/4.0. This may be necessary, for instance, if
	connecting through a firewall that restricts HTTP connections to a set
	of common USER_AGENT strings (but not including those like git/1.7.1).
	Can be overridden by the `GIT_HTTP_USER_AGENT` environment variable.

	http.followRedirects::
	Whether git should follow HTTP redirects. If set to `true`, git
	will transparently follow any redirect issued by a server it
	encounters. If set to `false`, git will treat all redirects as
	errors. If set to `initial`, git will follow redirects only for
	the initial request to a remote, but not for subsequent
	follow-up HTTP requests. Since git uses the redirected URL as
	the base for the follow-up requests, this is generally
	sufficient. The default is `initial`.

	http.<url>.*::
	Any of the http.* options above can be applied selectively to some URLs.
	For a config key to match a URL, each element of the config key is
	compared to that of the URL, in the following order:
	+
	--
	. Scheme (e.g., `https` in `https://example.com/`). This field
	must match exactly between the config key and the URL.

	. Host/domain name (e.g., `example.com` in `https://example.com/`).
	This field must match between the config key and the URL. It is
	possible to specify a `*` as part of the host name to match all subdomains
	at this level. `https://*.example.com/` for example would match
	`https://foo.example.com/`, but not `https://foo.bar.example.com/`.

	. Port number (e.g., `8080` in `http://example.com:8080/`).
	This field must match exactly between the config key and the URL.
	Omitted port numbers are automatically converted to the correct
	default for the scheme before matching.

	. Path (e.g., `repo.git` in `https://example.com/repo.git`). The
	path field of the config key must match the path field of the URL
	either exactly or as a prefix of slash-delimited path elements. This means
	a config key with path `foo/` matches URL path `foo/bar`. A prefix can only
	match on a slash (`/`) boundary. Longer matches take precedence (so a config
	key with path `foo/bar` is a better match to URL path `foo/bar` than a config
	key with just path `foo/`).

	. User name (e.g., `user` in `https://user@example.com/repo.git`). If
	the config key has a user name it must match the user name in the
	URL exactly. If the config key does not have a user name, that
	config key will match a URL with any user name (including none),
	but at a lower precedence than a config key with a user name.
	--
	+
	The list above is ordered by decreasing precedence; a URL that matches
	a config key's path is preferred to one that matches its user name. For example,
	if the URL is `https://user@example.com/foo/bar` a config key match of
	`https://example.com/foo` will be preferred over a config key match of
	`https://user@example.com`.
	+
	All URLs are normalized before attempting any matching (the password part,
	if embedded in the URL, is always ignored for matching purposes) so that
	equivalent URLs that are simply spelled differently will match properly.
	Environment variable settings always override any matches. The URLs that are
	matched against are those given directly to Git commands. This means any URLs
	visited as a result of a redirection do not participate in matching.