| #include "../git-compat-util.h" |
| #include "win32.h" |
| #include <conio.h> |
| #include <wchar.h> |
| #include "../strbuf.h" |
| #include "../run-command.h" |
| #include "../cache.h" |
| #include "win32/lazyload.h" |
| #include "../config.h" |
| |
| #define HCAST(type, handle) ((type)(intptr_t)handle) |
| |
| static const int delay[] = { 0, 1, 10, 20, 40 }; |
| |
| int err_win_to_posix(DWORD winerr) |
| { |
| int error = ENOSYS; |
| switch(winerr) { |
| case ERROR_ACCESS_DENIED: error = EACCES; break; |
| case ERROR_ACCOUNT_DISABLED: error = EACCES; break; |
| case ERROR_ACCOUNT_RESTRICTION: error = EACCES; break; |
| case ERROR_ALREADY_ASSIGNED: error = EBUSY; break; |
| case ERROR_ALREADY_EXISTS: error = EEXIST; break; |
| case ERROR_ARITHMETIC_OVERFLOW: error = ERANGE; break; |
| case ERROR_BAD_COMMAND: error = EIO; break; |
| case ERROR_BAD_DEVICE: error = ENODEV; break; |
| case ERROR_BAD_DRIVER_LEVEL: error = ENXIO; break; |
| case ERROR_BAD_EXE_FORMAT: error = ENOEXEC; break; |
| case ERROR_BAD_FORMAT: error = ENOEXEC; break; |
| case ERROR_BAD_LENGTH: error = EINVAL; break; |
| case ERROR_BAD_PATHNAME: error = ENOENT; break; |
| case ERROR_BAD_PIPE: error = EPIPE; break; |
| case ERROR_BAD_UNIT: error = ENODEV; break; |
| case ERROR_BAD_USERNAME: error = EINVAL; break; |
| case ERROR_BROKEN_PIPE: error = EPIPE; break; |
| case ERROR_BUFFER_OVERFLOW: error = ENAMETOOLONG; break; |
| case ERROR_BUSY: error = EBUSY; break; |
| case ERROR_BUSY_DRIVE: error = EBUSY; break; |
| case ERROR_CALL_NOT_IMPLEMENTED: error = ENOSYS; break; |
| case ERROR_CANNOT_MAKE: error = EACCES; break; |
| case ERROR_CANTOPEN: error = EIO; break; |
| case ERROR_CANTREAD: error = EIO; break; |
| case ERROR_CANTWRITE: error = EIO; break; |
| case ERROR_CRC: error = EIO; break; |
| case ERROR_CURRENT_DIRECTORY: error = EACCES; break; |
| case ERROR_DEVICE_IN_USE: error = EBUSY; break; |
| case ERROR_DEV_NOT_EXIST: error = ENODEV; break; |
| case ERROR_DIRECTORY: error = EINVAL; break; |
| case ERROR_DIR_NOT_EMPTY: error = ENOTEMPTY; break; |
| case ERROR_DISK_CHANGE: error = EIO; break; |
| case ERROR_DISK_FULL: error = ENOSPC; break; |
| case ERROR_DRIVE_LOCKED: error = EBUSY; break; |
| case ERROR_ENVVAR_NOT_FOUND: error = EINVAL; break; |
| case ERROR_EXE_MARKED_INVALID: error = ENOEXEC; break; |
| case ERROR_FILENAME_EXCED_RANGE: error = ENAMETOOLONG; break; |
| case ERROR_FILE_EXISTS: error = EEXIST; break; |
| case ERROR_FILE_INVALID: error = ENODEV; break; |
| case ERROR_FILE_NOT_FOUND: error = ENOENT; break; |
| case ERROR_GEN_FAILURE: error = EIO; break; |
| case ERROR_HANDLE_DISK_FULL: error = ENOSPC; break; |
| case ERROR_INSUFFICIENT_BUFFER: error = ENOMEM; break; |
| case ERROR_INVALID_ACCESS: error = EACCES; break; |
| case ERROR_INVALID_ADDRESS: error = EFAULT; break; |
| case ERROR_INVALID_BLOCK: error = EFAULT; break; |
| case ERROR_INVALID_DATA: error = EINVAL; break; |
| case ERROR_INVALID_DRIVE: error = ENODEV; break; |
| case ERROR_INVALID_EXE_SIGNATURE: error = ENOEXEC; break; |
| case ERROR_INVALID_FLAGS: error = EINVAL; break; |
| case ERROR_INVALID_FUNCTION: error = ENOSYS; break; |
| case ERROR_INVALID_HANDLE: error = EBADF; break; |
| case ERROR_INVALID_LOGON_HOURS: error = EACCES; break; |
| case ERROR_INVALID_NAME: error = EINVAL; break; |
| case ERROR_INVALID_OWNER: error = EINVAL; break; |
| case ERROR_INVALID_PARAMETER: error = EINVAL; break; |
| case ERROR_INVALID_PASSWORD: error = EPERM; break; |
| case ERROR_INVALID_PRIMARY_GROUP: error = EINVAL; break; |
| case ERROR_INVALID_SIGNAL_NUMBER: error = EINVAL; break; |
| case ERROR_INVALID_TARGET_HANDLE: error = EIO; break; |
| case ERROR_INVALID_WORKSTATION: error = EACCES; break; |
| case ERROR_IO_DEVICE: error = EIO; break; |
| case ERROR_IO_INCOMPLETE: error = EINTR; break; |
| case ERROR_LOCKED: error = EBUSY; break; |
| case ERROR_LOCK_VIOLATION: error = EACCES; break; |
| case ERROR_LOGON_FAILURE: error = EACCES; break; |
| case ERROR_MAPPED_ALIGNMENT: error = EINVAL; break; |
| case ERROR_META_EXPANSION_TOO_LONG: error = E2BIG; break; |
| case ERROR_MORE_DATA: error = EPIPE; break; |
| case ERROR_NEGATIVE_SEEK: error = ESPIPE; break; |
| case ERROR_NOACCESS: error = EFAULT; break; |
| case ERROR_NONE_MAPPED: error = EINVAL; break; |
| case ERROR_NOT_ENOUGH_MEMORY: error = ENOMEM; break; |
| case ERROR_NOT_READY: error = EAGAIN; break; |
| case ERROR_NOT_SAME_DEVICE: error = EXDEV; break; |
| case ERROR_NO_DATA: error = EPIPE; break; |
| case ERROR_NO_MORE_SEARCH_HANDLES: error = EIO; break; |
| case ERROR_NO_PROC_SLOTS: error = EAGAIN; break; |
| case ERROR_NO_SUCH_PRIVILEGE: error = EACCES; break; |
| case ERROR_OPEN_FAILED: error = EIO; break; |
| case ERROR_OPEN_FILES: error = EBUSY; break; |
| case ERROR_OPERATION_ABORTED: error = EINTR; break; |
| case ERROR_OUTOFMEMORY: error = ENOMEM; break; |
| case ERROR_PASSWORD_EXPIRED: error = EACCES; break; |
| case ERROR_PATH_BUSY: error = EBUSY; break; |
| case ERROR_PATH_NOT_FOUND: error = ENOENT; break; |
| case ERROR_PIPE_BUSY: error = EBUSY; break; |
| case ERROR_PIPE_CONNECTED: error = EPIPE; break; |
| case ERROR_PIPE_LISTENING: error = EPIPE; break; |
| case ERROR_PIPE_NOT_CONNECTED: error = EPIPE; break; |
| case ERROR_PRIVILEGE_NOT_HELD: error = EACCES; break; |
| case ERROR_READ_FAULT: error = EIO; break; |
| case ERROR_SEEK: error = EIO; break; |
| case ERROR_SEEK_ON_DEVICE: error = ESPIPE; break; |
| case ERROR_SHARING_BUFFER_EXCEEDED: error = ENFILE; break; |
| case ERROR_SHARING_VIOLATION: error = EACCES; break; |
| case ERROR_STACK_OVERFLOW: error = ENOMEM; break; |
| case ERROR_SWAPERROR: error = ENOENT; break; |
| case ERROR_TOO_MANY_MODULES: error = EMFILE; break; |
| case ERROR_TOO_MANY_OPEN_FILES: error = EMFILE; break; |
| case ERROR_UNRECOGNIZED_MEDIA: error = ENXIO; break; |
| case ERROR_UNRECOGNIZED_VOLUME: error = ENODEV; break; |
| case ERROR_WAIT_NO_CHILDREN: error = ECHILD; break; |
| case ERROR_WRITE_FAULT: error = EIO; break; |
| case ERROR_WRITE_PROTECT: error = EROFS; break; |
| } |
| return error; |
| } |
| |
| static inline int is_file_in_use_error(DWORD errcode) |
| { |
| switch (errcode) { |
| case ERROR_SHARING_VIOLATION: |
| case ERROR_ACCESS_DENIED: |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static int read_yes_no_answer(void) |
| { |
| char answer[1024]; |
| |
| if (fgets(answer, sizeof(answer), stdin)) { |
| size_t answer_len = strlen(answer); |
| int got_full_line = 0, c; |
| |
| /* remove the newline */ |
| if (answer_len >= 2 && answer[answer_len-2] == '\r') { |
| answer[answer_len-2] = '\0'; |
| got_full_line = 1; |
| } else if (answer_len >= 1 && answer[answer_len-1] == '\n') { |
| answer[answer_len-1] = '\0'; |
| got_full_line = 1; |
| } |
| /* flush the buffer in case we did not get the full line */ |
| if (!got_full_line) |
| while ((c = getchar()) != EOF && c != '\n') |
| ; |
| } else |
| /* we could not read, return the |
| * default answer which is no */ |
| return 0; |
| |
| if (tolower(answer[0]) == 'y' && !answer[1]) |
| return 1; |
| if (!strncasecmp(answer, "yes", sizeof(answer))) |
| return 1; |
| if (tolower(answer[0]) == 'n' && !answer[1]) |
| return 0; |
| if (!strncasecmp(answer, "no", sizeof(answer))) |
| return 0; |
| |
| /* did not find an answer we understand */ |
| return -1; |
| } |
| |
| static int ask_yes_no_if_possible(const char *format, ...) |
| { |
| char question[4096]; |
| const char *retry_hook[] = { NULL, NULL, NULL }; |
| va_list args; |
| |
| va_start(args, format); |
| vsnprintf(question, sizeof(question), format, args); |
| va_end(args); |
| |
| if ((retry_hook[0] = mingw_getenv("GIT_ASK_YESNO"))) { |
| retry_hook[1] = question; |
| return !run_command_v_opt(retry_hook, 0); |
| } |
| |
| if (!isatty(_fileno(stdin)) || !isatty(_fileno(stderr))) |
| return 0; |
| |
| while (1) { |
| int answer; |
| fprintf(stderr, "%s (y/n) ", question); |
| |
| if ((answer = read_yes_no_answer()) >= 0) |
| return answer; |
| |
| fprintf(stderr, "Sorry, I did not understand your answer. " |
| "Please type 'y' or 'n'\n"); |
| } |
| } |
| |
| /* Windows only */ |
| enum hide_dotfiles_type { |
| HIDE_DOTFILES_FALSE = 0, |
| HIDE_DOTFILES_TRUE, |
| HIDE_DOTFILES_DOTGITONLY |
| }; |
| |
| static enum hide_dotfiles_type hide_dotfiles = HIDE_DOTFILES_DOTGITONLY; |
| static char *unset_environment_variables; |
| |
| int mingw_core_config(const char *var, const char *value, void *cb) |
| { |
| if (!strcmp(var, "core.hidedotfiles")) { |
| if (value && !strcasecmp(value, "dotgitonly")) |
| hide_dotfiles = HIDE_DOTFILES_DOTGITONLY; |
| else |
| hide_dotfiles = git_config_bool(var, value); |
| return 0; |
| } |
| |
| if (!strcmp(var, "core.unsetenvvars")) { |
| free(unset_environment_variables); |
| unset_environment_variables = xstrdup(value); |
| return 0; |
| } |
| |
| return 0; |
| } |
| |
| /* Normalizes NT paths as returned by some low-level APIs. */ |
| static wchar_t *normalize_ntpath(wchar_t *wbuf) |
| { |
| int i; |
| /* fix absolute path prefixes */ |
| if (wbuf[0] == '\\') { |
| /* strip NT namespace prefixes */ |
| if (!wcsncmp(wbuf, L"\\??\\", 4) || |
| !wcsncmp(wbuf, L"\\\\?\\", 4)) |
| wbuf += 4; |
| else if (!wcsnicmp(wbuf, L"\\DosDevices\\", 12)) |
| wbuf += 12; |
| /* replace remaining '...UNC\' with '\\' */ |
| if (!wcsnicmp(wbuf, L"UNC\\", 4)) { |
| wbuf += 2; |
| *wbuf = '\\'; |
| } |
| } |
| /* convert backslashes to slashes */ |
| for (i = 0; wbuf[i]; i++) |
| if (wbuf[i] == '\\') |
| wbuf[i] = '/'; |
| return wbuf; |
| } |
| |
| int mingw_unlink(const char *pathname) |
| { |
| int ret, tries = 0; |
| wchar_t wpathname[MAX_PATH]; |
| if (xutftowcs_path(wpathname, pathname) < 0) |
| return -1; |
| |
| /* read-only files cannot be removed */ |
| _wchmod(wpathname, 0666); |
| while ((ret = _wunlink(wpathname)) == -1 && tries < ARRAY_SIZE(delay)) { |
| if (!is_file_in_use_error(GetLastError())) |
| break; |
| /* |
| * We assume that some other process had the source or |
| * destination file open at the wrong moment and retry. |
| * In order to give the other process a higher chance to |
| * complete its operation, we give up our time slice now. |
| * If we have to retry again, we do sleep a bit. |
| */ |
| Sleep(delay[tries]); |
| tries++; |
| } |
| while (ret == -1 && is_file_in_use_error(GetLastError()) && |
| ask_yes_no_if_possible("Unlink of file '%s' failed. " |
| "Should I try again?", pathname)) |
| ret = _wunlink(wpathname); |
| return ret; |
| } |
| |
| static int is_dir_empty(const wchar_t *wpath) |
| { |
| WIN32_FIND_DATAW findbuf; |
| HANDLE handle; |
| wchar_t wbuf[MAX_PATH + 2]; |
| wcscpy(wbuf, wpath); |
| wcscat(wbuf, L"\\*"); |
| handle = FindFirstFileW(wbuf, &findbuf); |
| if (handle == INVALID_HANDLE_VALUE) |
| return GetLastError() == ERROR_NO_MORE_FILES; |
| |
| while (!wcscmp(findbuf.cFileName, L".") || |
| !wcscmp(findbuf.cFileName, L"..")) |
| if (!FindNextFileW(handle, &findbuf)) { |
| DWORD err = GetLastError(); |
| FindClose(handle); |
| return err == ERROR_NO_MORE_FILES; |
| } |
| FindClose(handle); |
| return 0; |
| } |
| |
| int mingw_rmdir(const char *pathname) |
| { |
| int ret, tries = 0; |
| wchar_t wpathname[MAX_PATH]; |
| if (xutftowcs_path(wpathname, pathname) < 0) |
| return -1; |
| |
| while ((ret = _wrmdir(wpathname)) == -1 && tries < ARRAY_SIZE(delay)) { |
| if (!is_file_in_use_error(GetLastError())) |
| errno = err_win_to_posix(GetLastError()); |
| if (errno != EACCES) |
| break; |
| if (!is_dir_empty(wpathname)) { |
| errno = ENOTEMPTY; |
| break; |
| } |
| /* |
| * We assume that some other process had the source or |
| * destination file open at the wrong moment and retry. |
| * In order to give the other process a higher chance to |
| * complete its operation, we give up our time slice now. |
| * If we have to retry again, we do sleep a bit. |
| */ |
| Sleep(delay[tries]); |
| tries++; |
| } |
| while (ret == -1 && errno == EACCES && is_file_in_use_error(GetLastError()) && |
| ask_yes_no_if_possible("Deletion of directory '%s' failed. " |
| "Should I try again?", pathname)) |
| ret = _wrmdir(wpathname); |
| return ret; |
| } |
| |
| static inline int needs_hiding(const char *path) |
| { |
| const char *basename; |
| |
| if (hide_dotfiles == HIDE_DOTFILES_FALSE) |
| return 0; |
| |
| /* We cannot use basename(), as it would remove trailing slashes */ |
| mingw_skip_dos_drive_prefix((char **)&path); |
| if (!*path) |
| return 0; |
| |
| for (basename = path; *path; path++) |
| if (is_dir_sep(*path)) { |
| do { |
| path++; |
| } while (is_dir_sep(*path)); |
| /* ignore trailing slashes */ |
| if (*path) |
| basename = path; |
| } |
| |
| if (hide_dotfiles == HIDE_DOTFILES_TRUE) |
| return *basename == '.'; |
| |
| assert(hide_dotfiles == HIDE_DOTFILES_DOTGITONLY); |
| return !strncasecmp(".git", basename, 4) && |
| (!basename[4] || is_dir_sep(basename[4])); |
| } |
| |
| static int set_hidden_flag(const wchar_t *path, int set) |
| { |
| DWORD original = GetFileAttributesW(path), modified; |
| if (set) |
| modified = original | FILE_ATTRIBUTE_HIDDEN; |
| else |
| modified = original & ~FILE_ATTRIBUTE_HIDDEN; |
| if (original == modified || SetFileAttributesW(path, modified)) |
| return 0; |
| errno = err_win_to_posix(GetLastError()); |
| return -1; |
| } |
| |
| int mingw_mkdir(const char *path, int mode) |
| { |
| int ret; |
| wchar_t wpath[MAX_PATH]; |
| if (xutftowcs_path(wpath, path) < 0) |
| return -1; |
| ret = _wmkdir(wpath); |
| if (!ret && needs_hiding(path)) |
| return set_hidden_flag(wpath, 1); |
| return ret; |
| } |
| |
| /* |
| * Calling CreateFile() using FILE_APPEND_DATA and without FILE_WRITE_DATA |
| * is documented in [1] as opening a writable file handle in append mode. |
| * (It is believed that) this is atomic since it is maintained by the |
| * kernel unlike the O_APPEND flag which is racily maintained by the CRT. |
| * |
| * [1] https://docs.microsoft.com/en-us/windows/desktop/fileio/file-access-rights-constants |
| * |
| * This trick does not appear to work for named pipes. Instead it creates |
| * a named pipe client handle that cannot be written to. Callers should |
| * just use the regular _wopen() for them. (And since client handle gets |
| * bound to a unique server handle, it isn't really an issue.) |
| */ |
| static int mingw_open_append(wchar_t const *wfilename, int oflags, ...) |
| { |
| HANDLE handle; |
| int fd; |
| DWORD create = (oflags & O_CREAT) ? OPEN_ALWAYS : OPEN_EXISTING; |
| |
| /* only these flags are supported */ |
| if ((oflags & ~O_CREAT) != (O_WRONLY | O_APPEND)) |
| return errno = ENOSYS, -1; |
| |
| /* |
| * FILE_SHARE_WRITE is required to permit child processes |
| * to append to the file. |
| */ |
| handle = CreateFileW(wfilename, FILE_APPEND_DATA, |
| FILE_SHARE_WRITE | FILE_SHARE_READ, |
| NULL, create, FILE_ATTRIBUTE_NORMAL, NULL); |
| if (handle == INVALID_HANDLE_VALUE) |
| return errno = err_win_to_posix(GetLastError()), -1; |
| |
| /* |
| * No O_APPEND here, because the CRT uses it only to reset the |
| * file pointer to EOF before each write(); but that is not |
| * necessary (and may lead to races) for a file created with |
| * FILE_APPEND_DATA. |
| */ |
| fd = _open_osfhandle((intptr_t)handle, O_BINARY); |
| if (fd < 0) |
| CloseHandle(handle); |
| return fd; |
| } |
| |
| /* |
| * Does the pathname map to the local named pipe filesystem? |
| * That is, does it have a "//./pipe/" prefix? |
| */ |
| static int is_local_named_pipe_path(const char *filename) |
| { |
| return (is_dir_sep(filename[0]) && |
| is_dir_sep(filename[1]) && |
| filename[2] == '.' && |
| is_dir_sep(filename[3]) && |
| !strncasecmp(filename+4, "pipe", 4) && |
| is_dir_sep(filename[8]) && |
| filename[9]); |
| } |
| |
| int mingw_open (const char *filename, int oflags, ...) |
| { |
| typedef int (*open_fn_t)(wchar_t const *wfilename, int oflags, ...); |
| va_list args; |
| unsigned mode; |
| int fd; |
| wchar_t wfilename[MAX_PATH]; |
| open_fn_t open_fn; |
| |
| va_start(args, oflags); |
| mode = va_arg(args, int); |
| va_end(args); |
| |
| if (filename && !strcmp(filename, "/dev/null")) |
| filename = "nul"; |
| |
| if ((oflags & O_APPEND) && !is_local_named_pipe_path(filename)) |
| open_fn = mingw_open_append; |
| else |
| open_fn = _wopen; |
| |
| if (xutftowcs_path(wfilename, filename) < 0) |
| return -1; |
| fd = open_fn(wfilename, oflags, mode); |
| |
| if (fd < 0 && (oflags & O_ACCMODE) != O_RDONLY && errno == EACCES) { |
| DWORD attrs = GetFileAttributesW(wfilename); |
| if (attrs != INVALID_FILE_ATTRIBUTES && (attrs & FILE_ATTRIBUTE_DIRECTORY)) |
| errno = EISDIR; |
| } |
| if ((oflags & O_CREAT) && needs_hiding(filename)) { |
| /* |
| * Internally, _wopen() uses the CreateFile() API which errors |
| * out with an ERROR_ACCESS_DENIED if CREATE_ALWAYS was |
| * specified and an already existing file's attributes do not |
| * match *exactly*. As there is no mode or flag we can set that |
| * would correspond to FILE_ATTRIBUTE_HIDDEN, let's just try |
| * again *without* the O_CREAT flag (that corresponds to the |
| * CREATE_ALWAYS flag of CreateFile()). |
| */ |
| if (fd < 0 && errno == EACCES) |
| fd = open_fn(wfilename, oflags & ~O_CREAT, mode); |
| if (fd >= 0 && set_hidden_flag(wfilename, 1)) |
| warning("could not mark '%s' as hidden.", filename); |
| } |
| return fd; |
| } |
| |
| static BOOL WINAPI ctrl_ignore(DWORD type) |
| { |
| return TRUE; |
| } |
| |
| #undef fgetc |
| int mingw_fgetc(FILE *stream) |
| { |
| int ch; |
| if (!isatty(_fileno(stream))) |
| return fgetc(stream); |
| |
| SetConsoleCtrlHandler(ctrl_ignore, TRUE); |
| while (1) { |
| ch = fgetc(stream); |
| if (ch != EOF || GetLastError() != ERROR_OPERATION_ABORTED) |
| break; |
| |
| /* Ctrl+C was pressed, simulate SIGINT and retry */ |
| mingw_raise(SIGINT); |
| } |
| SetConsoleCtrlHandler(ctrl_ignore, FALSE); |
| return ch; |
| } |
| |
| #undef fopen |
| FILE *mingw_fopen (const char *filename, const char *otype) |
| { |
| int hide = needs_hiding(filename); |
| FILE *file; |
| wchar_t wfilename[MAX_PATH], wotype[4]; |
| if (filename && !strcmp(filename, "/dev/null")) |
| filename = "nul"; |
| if (xutftowcs_path(wfilename, filename) < 0 || |
| xutftowcs(wotype, otype, ARRAY_SIZE(wotype)) < 0) |
| return NULL; |
| if (hide && !access(filename, F_OK) && set_hidden_flag(wfilename, 0)) { |
| error("could not unhide %s", filename); |
| return NULL; |
| } |
| file = _wfopen(wfilename, wotype); |
| if (!file && GetLastError() == ERROR_INVALID_NAME) |
| errno = ENOENT; |
| if (file && hide && set_hidden_flag(wfilename, 1)) |
| warning("could not mark '%s' as hidden.", filename); |
| return file; |
| } |
| |
| FILE *mingw_freopen (const char *filename, const char *otype, FILE *stream) |
| { |
| int hide = needs_hiding(filename); |
| FILE *file; |
| wchar_t wfilename[MAX_PATH], wotype[4]; |
| if (filename && !strcmp(filename, "/dev/null")) |
| filename = "nul"; |
| if (xutftowcs_path(wfilename, filename) < 0 || |
| xutftowcs(wotype, otype, ARRAY_SIZE(wotype)) < 0) |
| return NULL; |
| if (hide && !access(filename, F_OK) && set_hidden_flag(wfilename, 0)) { |
| error("could not unhide %s", filename); |
| return NULL; |
| } |
| file = _wfreopen(wfilename, wotype, stream); |
| if (file && hide && set_hidden_flag(wfilename, 1)) |
| warning("could not mark '%s' as hidden.", filename); |
| return file; |
| } |
| |
| #undef fflush |
| int mingw_fflush(FILE *stream) |
| { |
| int ret = fflush(stream); |
| |
| /* |
| * write() is used behind the scenes of stdio output functions. |
| * Since git code does not check for errors after each stdio write |
| * operation, it can happen that write() is called by a later |
| * stdio function even if an earlier write() call failed. In the |
| * case of a pipe whose readable end was closed, only the first |
| * call to write() reports EPIPE on Windows. Subsequent write() |
| * calls report EINVAL. It is impossible to notice whether this |
| * fflush invocation triggered such a case, therefore, we have to |
| * catch all EINVAL errors whole-sale. |
| */ |
| if (ret && errno == EINVAL) |
| errno = EPIPE; |
| |
| return ret; |
| } |
| |
| #undef write |
| ssize_t mingw_write(int fd, const void *buf, size_t len) |
| { |
| ssize_t result = write(fd, buf, len); |
| |
| if (result < 0 && errno == EINVAL && buf) { |
| /* check if fd is a pipe */ |
| HANDLE h = (HANDLE) _get_osfhandle(fd); |
| if (GetFileType(h) == FILE_TYPE_PIPE) |
| errno = EPIPE; |
| else |
| errno = EINVAL; |
| } |
| |
| return result; |
| } |
| |
| int mingw_access(const char *filename, int mode) |
| { |
| wchar_t wfilename[MAX_PATH]; |
| if (xutftowcs_path(wfilename, filename) < 0) |
| return -1; |
| /* X_OK is not supported by the MSVCRT version */ |
| return _waccess(wfilename, mode & ~X_OK); |
| } |
| |
| int mingw_chdir(const char *dirname) |
| { |
| wchar_t wdirname[MAX_PATH]; |
| if (xutftowcs_path(wdirname, dirname) < 0) |
| return -1; |
| return _wchdir(wdirname); |
| } |
| |
| int mingw_chmod(const char *filename, int mode) |
| { |
| wchar_t wfilename[MAX_PATH]; |
| if (xutftowcs_path(wfilename, filename) < 0) |
| return -1; |
| return _wchmod(wfilename, mode); |
| } |
| |
| /* |
| * The unit of FILETIME is 100-nanoseconds since January 1, 1601, UTC. |
| * Returns the 100-nanoseconds ("hekto nanoseconds") since the epoch. |
| */ |
| static inline long long filetime_to_hnsec(const FILETIME *ft) |
| { |
| long long winTime = ((long long)ft->dwHighDateTime << 32) + ft->dwLowDateTime; |
| /* Windows to Unix Epoch conversion */ |
| return winTime - 116444736000000000LL; |
| } |
| |
| static inline void filetime_to_timespec(const FILETIME *ft, struct timespec *ts) |
| { |
| long long hnsec = filetime_to_hnsec(ft); |
| ts->tv_sec = (time_t)(hnsec / 10000000); |
| ts->tv_nsec = (hnsec % 10000000) * 100; |
| } |
| |
| /** |
| * Verifies that safe_create_leading_directories() would succeed. |
| */ |
| static int has_valid_directory_prefix(wchar_t *wfilename) |
| { |
| int n = wcslen(wfilename); |
| |
| while (n > 0) { |
| wchar_t c = wfilename[--n]; |
| DWORD attributes; |
| |
| if (!is_dir_sep(c)) |
| continue; |
| |
| wfilename[n] = L'\0'; |
| attributes = GetFileAttributesW(wfilename); |
| wfilename[n] = c; |
| if (attributes == FILE_ATTRIBUTE_DIRECTORY || |
| attributes == FILE_ATTRIBUTE_DEVICE) |
| return 1; |
| if (attributes == INVALID_FILE_ATTRIBUTES) |
| switch (GetLastError()) { |
| case ERROR_PATH_NOT_FOUND: |
| continue; |
| case ERROR_FILE_NOT_FOUND: |
| /* This implies parent directory exists. */ |
| return 1; |
| } |
| return 0; |
| } |
| return 1; |
| } |
| |
| /* We keep the do_lstat code in a separate function to avoid recursion. |
| * When a path ends with a slash, the stat will fail with ENOENT. In |
| * this case, we strip the trailing slashes and stat again. |
| * |
| * If follow is true then act like stat() and report on the link |
| * target. Otherwise report on the link itself. |
| */ |
| static int do_lstat(int follow, const char *file_name, struct stat *buf) |
| { |
| WIN32_FILE_ATTRIBUTE_DATA fdata; |
| wchar_t wfilename[MAX_PATH]; |
| if (xutftowcs_path(wfilename, file_name) < 0) |
| return -1; |
| |
| if (GetFileAttributesExW(wfilename, GetFileExInfoStandard, &fdata)) { |
| buf->st_ino = 0; |
| buf->st_gid = 0; |
| buf->st_uid = 0; |
| buf->st_nlink = 1; |
| buf->st_mode = file_attr_to_st_mode(fdata.dwFileAttributes); |
| buf->st_size = fdata.nFileSizeLow | |
| (((off_t)fdata.nFileSizeHigh)<<32); |
| buf->st_dev = buf->st_rdev = 0; /* not used by Git */ |
| filetime_to_timespec(&(fdata.ftLastAccessTime), &(buf->st_atim)); |
| filetime_to_timespec(&(fdata.ftLastWriteTime), &(buf->st_mtim)); |
| filetime_to_timespec(&(fdata.ftCreationTime), &(buf->st_ctim)); |
| if (fdata.dwFileAttributes & FILE_ATTRIBUTE_REPARSE_POINT) { |
| WIN32_FIND_DATAW findbuf; |
| HANDLE handle = FindFirstFileW(wfilename, &findbuf); |
| if (handle != INVALID_HANDLE_VALUE) { |
| if ((findbuf.dwFileAttributes & FILE_ATTRIBUTE_REPARSE_POINT) && |
| (findbuf.dwReserved0 == IO_REPARSE_TAG_SYMLINK)) { |
| if (follow) { |
| char buffer[MAXIMUM_REPARSE_DATA_BUFFER_SIZE]; |
| buf->st_size = readlink(file_name, buffer, MAXIMUM_REPARSE_DATA_BUFFER_SIZE); |
| } else { |
| buf->st_mode = S_IFLNK; |
| } |
| buf->st_mode |= S_IREAD; |
| if (!(findbuf.dwFileAttributes & FILE_ATTRIBUTE_READONLY)) |
| buf->st_mode |= S_IWRITE; |
| } |
| FindClose(handle); |
| } |
| } |
| return 0; |
| } |
| switch (GetLastError()) { |
| case ERROR_ACCESS_DENIED: |
| case ERROR_SHARING_VIOLATION: |
| case ERROR_LOCK_VIOLATION: |
| case ERROR_SHARING_BUFFER_EXCEEDED: |
| errno = EACCES; |
| break; |
| case ERROR_BUFFER_OVERFLOW: |
| errno = ENAMETOOLONG; |
| break; |
| case ERROR_NOT_ENOUGH_MEMORY: |
| errno = ENOMEM; |
| break; |
| case ERROR_PATH_NOT_FOUND: |
| if (!has_valid_directory_prefix(wfilename)) { |
| errno = ENOTDIR; |
| break; |
| } |
| /* fallthru */ |
| default: |
| errno = ENOENT; |
| break; |
| } |
| return -1; |
| } |
| |
| /* We provide our own lstat/fstat functions, since the provided |
| * lstat/fstat functions are so slow. These stat functions are |
| * tailored for Git's usage (read: fast), and are not meant to be |
| * complete. Note that Git stat()s are redirected to mingw_lstat() |
| * too, since Windows doesn't really handle symlinks that well. |
| */ |
| static int do_stat_internal(int follow, const char *file_name, struct stat *buf) |
| { |
| int namelen; |
| char alt_name[PATH_MAX]; |
| |
| if (!do_lstat(follow, file_name, buf)) |
| return 0; |
| |
| /* if file_name ended in a '/', Windows returned ENOENT; |
| * try again without trailing slashes |
| */ |
| if (errno != ENOENT) |
| return -1; |
| |
| namelen = strlen(file_name); |
| if (namelen && file_name[namelen-1] != '/') |
| return -1; |
| while (namelen && file_name[namelen-1] == '/') |
| --namelen; |
| if (!namelen || namelen >= PATH_MAX) |
| return -1; |
| |
| memcpy(alt_name, file_name, namelen); |
| alt_name[namelen] = 0; |
| return do_lstat(follow, alt_name, buf); |
| } |
| |
| static int get_file_info_by_handle(HANDLE hnd, struct stat *buf) |
| { |
| BY_HANDLE_FILE_INFORMATION fdata; |
| |
| if (!GetFileInformationByHandle(hnd, &fdata)) { |
| errno = err_win_to_posix(GetLastError()); |
| return -1; |
| } |
| |
| buf->st_ino = 0; |
| buf->st_gid = 0; |
| buf->st_uid = 0; |
| buf->st_nlink = 1; |
| buf->st_mode = file_attr_to_st_mode(fdata.dwFileAttributes); |
| buf->st_size = fdata.nFileSizeLow | |
| (((off_t)fdata.nFileSizeHigh)<<32); |
| buf->st_dev = buf->st_rdev = 0; /* not used by Git */ |
| filetime_to_timespec(&(fdata.ftLastAccessTime), &(buf->st_atim)); |
| filetime_to_timespec(&(fdata.ftLastWriteTime), &(buf->st_mtim)); |
| filetime_to_timespec(&(fdata.ftCreationTime), &(buf->st_ctim)); |
| return 0; |
| } |
| |
| int mingw_lstat(const char *file_name, struct stat *buf) |
| { |
| return do_stat_internal(0, file_name, buf); |
| } |
| int mingw_stat(const char *file_name, struct stat *buf) |
| { |
| return do_stat_internal(1, file_name, buf); |
| } |
| |
| int mingw_fstat(int fd, struct stat *buf) |
| { |
| HANDLE fh = (HANDLE)_get_osfhandle(fd); |
| DWORD avail, type = GetFileType(fh) & ~FILE_TYPE_REMOTE; |
| |
| switch (type) { |
| case FILE_TYPE_DISK: |
| return get_file_info_by_handle(fh, buf); |
| |
| case FILE_TYPE_CHAR: |
| case FILE_TYPE_PIPE: |
| /* initialize stat fields */ |
| memset(buf, 0, sizeof(*buf)); |
| buf->st_nlink = 1; |
| |
| if (type == FILE_TYPE_CHAR) { |
| buf->st_mode = _S_IFCHR; |
| } else { |
| buf->st_mode = _S_IFIFO; |
| if (PeekNamedPipe(fh, NULL, 0, NULL, &avail, NULL)) |
| buf->st_size = avail; |
| } |
| return 0; |
| |
| default: |
| errno = EBADF; |
| return -1; |
| } |
| } |
| |
| static inline void time_t_to_filetime(time_t t, FILETIME *ft) |
| { |
| long long winTime = t * 10000000LL + 116444736000000000LL; |
| ft->dwLowDateTime = winTime; |
| ft->dwHighDateTime = winTime >> 32; |
| } |
| |
| int mingw_utime (const char *file_name, const struct utimbuf *times) |
| { |
| FILETIME mft, aft; |
| int fh, rc; |
| DWORD attrs; |
| wchar_t wfilename[MAX_PATH]; |
| if (xutftowcs_path(wfilename, file_name) < 0) |
| return -1; |
| |
| /* must have write permission */ |
| attrs = GetFileAttributesW(wfilename); |
| if (attrs != INVALID_FILE_ATTRIBUTES && |
| (attrs & FILE_ATTRIBUTE_READONLY)) { |
| /* ignore errors here; open() will report them */ |
| SetFileAttributesW(wfilename, attrs & ~FILE_ATTRIBUTE_READONLY); |
| } |
| |
| if ((fh = _wopen(wfilename, O_RDWR | O_BINARY)) < 0) { |
| rc = -1; |
| goto revert_attrs; |
| } |
| |
| if (times) { |
| time_t_to_filetime(times->modtime, &mft); |
| time_t_to_filetime(times->actime, &aft); |
| } else { |
| GetSystemTimeAsFileTime(&mft); |
| aft = mft; |
| } |
| if (!SetFileTime((HANDLE)_get_osfhandle(fh), NULL, &aft, &mft)) { |
| errno = EINVAL; |
| rc = -1; |
| } else |
| rc = 0; |
| close(fh); |
| |
| revert_attrs: |
| if (attrs != INVALID_FILE_ATTRIBUTES && |
| (attrs & FILE_ATTRIBUTE_READONLY)) { |
| /* ignore errors again */ |
| SetFileAttributesW(wfilename, attrs); |
| } |
| return rc; |
| } |
| |
| #undef strftime |
| size_t mingw_strftime(char *s, size_t max, |
| const char *format, const struct tm *tm) |
| { |
| size_t ret = strftime(s, max, format, tm); |
| |
| if (!ret && errno == EINVAL) |
| die("invalid strftime format: '%s'", format); |
| return ret; |
| } |
| |
| unsigned int sleep (unsigned int seconds) |
| { |
| Sleep(seconds*1000); |
| return 0; |
| } |
| |
| char *mingw_mktemp(char *template) |
| { |
| wchar_t wtemplate[MAX_PATH]; |
| if (xutftowcs_path(wtemplate, template) < 0) |
| return NULL; |
| if (!_wmktemp(wtemplate)) |
| return NULL; |
| if (xwcstoutf(template, wtemplate, strlen(template) + 1) < 0) |
| return NULL; |
| return template; |
| } |
| |
| int mkstemp(char *template) |
| { |
| char *filename = mktemp(template); |
| if (filename == NULL) |
| return -1; |
| return open(filename, O_RDWR | O_CREAT, 0600); |
| } |
| |
| int gettimeofday(struct timeval *tv, void *tz) |
| { |
| FILETIME ft; |
| long long hnsec; |
| |
| GetSystemTimeAsFileTime(&ft); |
| hnsec = filetime_to_hnsec(&ft); |
| tv->tv_sec = hnsec / 10000000; |
| tv->tv_usec = (hnsec % 10000000) / 10; |
| return 0; |
| } |
| |
| int pipe(int filedes[2]) |
| { |
| HANDLE h[2]; |
| |
| /* this creates non-inheritable handles */ |
| if (!CreatePipe(&h[0], &h[1], NULL, 8192)) { |
| errno = err_win_to_posix(GetLastError()); |
| return -1; |
| } |
| filedes[0] = _open_osfhandle(HCAST(int, h[0]), O_NOINHERIT); |
| if (filedes[0] < 0) { |
| CloseHandle(h[0]); |
| CloseHandle(h[1]); |
| return -1; |
| } |
| filedes[1] = _open_osfhandle(HCAST(int, h[1]), O_NOINHERIT); |
| if (filedes[1] < 0) { |
| close(filedes[0]); |
| CloseHandle(h[1]); |
| return -1; |
| } |
| return 0; |
| } |
| |
| struct tm *gmtime_r(const time_t *timep, struct tm *result) |
| { |
| /* gmtime() in MSVCRT.DLL is thread-safe, but not reentrant */ |
| memcpy(result, gmtime(timep), sizeof(struct tm)); |
| return result; |
| } |
| |
| struct tm *localtime_r(const time_t *timep, struct tm *result) |
| { |
| /* localtime() in MSVCRT.DLL is thread-safe, but not reentrant */ |
| memcpy(result, localtime(timep), sizeof(struct tm)); |
| return result; |
| } |
| |
| char *mingw_getcwd(char *pointer, int len) |
| { |
| wchar_t cwd[MAX_PATH], wpointer[MAX_PATH]; |
| DWORD ret = GetCurrentDirectoryW(ARRAY_SIZE(cwd), cwd); |
| |
| if (!ret || ret >= ARRAY_SIZE(cwd)) { |
| errno = ret ? ENAMETOOLONG : err_win_to_posix(GetLastError()); |
| return NULL; |
| } |
| ret = GetLongPathNameW(cwd, wpointer, ARRAY_SIZE(wpointer)); |
| if (!ret && GetLastError() == ERROR_ACCESS_DENIED) { |
| HANDLE hnd = CreateFileW(cwd, 0, |
| FILE_SHARE_READ | FILE_SHARE_WRITE | FILE_SHARE_DELETE, NULL, |
| OPEN_EXISTING, FILE_FLAG_BACKUP_SEMANTICS, NULL); |
| if (hnd == INVALID_HANDLE_VALUE) |
| return NULL; |
| ret = GetFinalPathNameByHandleW(hnd, wpointer, ARRAY_SIZE(wpointer), 0); |
| CloseHandle(hnd); |
| if (!ret || ret >= ARRAY_SIZE(wpointer)) |
| return NULL; |
| if (xwcstoutf(pointer, normalize_ntpath(wpointer), len) < 0) |
| return NULL; |
| return pointer; |
| } |
| if (!ret || ret >= ARRAY_SIZE(wpointer)) |
| return NULL; |
| if (xwcstoutf(pointer, wpointer, len) < 0) |
| return NULL; |
| convert_slashes(pointer); |
| return pointer; |
| } |
| |
| /* |
| * See "Parsing C++ Command-Line Arguments" at Microsoft's Docs: |
| * https://docs.microsoft.com/en-us/cpp/cpp/parsing-cpp-command-line-arguments |
| */ |
| static const char *quote_arg(const char *arg) |
| { |
| /* count chars to quote */ |
| int len = 0, n = 0; |
| int force_quotes = 0; |
| char *q, *d; |
| const char *p = arg; |
| if (!*p) force_quotes = 1; |
| while (*p) { |
| if (isspace(*p) || *p == '*' || *p == '?' || *p == '{' || *p == '\'') |
| force_quotes = 1; |
| else if (*p == '"') |
| n++; |
| else if (*p == '\\') { |
| int count = 0; |
| while (*p == '\\') { |
| count++; |
| p++; |
| len++; |
| } |
| if (*p == '"') |
| n += count*2 + 1; |
| continue; |
| } |
| len++; |
| p++; |
| } |
| if (!force_quotes && n == 0) |
| return arg; |
| |
| /* insert \ where necessary */ |
| d = q = xmalloc(st_add3(len, n, 3)); |
| *d++ = '"'; |
| while (*arg) { |
| if (*arg == '"') |
| *d++ = '\\'; |
| else if (*arg == '\\') { |
| int count = 0; |
| while (*arg == '\\') { |
| count++; |
| *d++ = *arg++; |
| } |
| if (*arg == '"') { |
| while (count-- > 0) |
| *d++ = '\\'; |
| *d++ = '\\'; |
| } |
| } |
| *d++ = *arg++; |
| } |
| *d++ = '"'; |
| *d++ = 0; |
| return q; |
| } |
| |
| static const char *parse_interpreter(const char *cmd) |
| { |
| static char buf[100]; |
| char *p, *opt; |
| int n, fd; |
| |
| /* don't even try a .exe */ |
| n = strlen(cmd); |
| if (n >= 4 && !strcasecmp(cmd+n-4, ".exe")) |
| return NULL; |
| |
| fd = open(cmd, O_RDONLY); |
| if (fd < 0) |
| return NULL; |
| n = read(fd, buf, sizeof(buf)-1); |
| close(fd); |
| if (n < 4) /* at least '#!/x' and not error */ |
| return NULL; |
| |
| if (buf[0] != '#' || buf[1] != '!') |
| return NULL; |
| buf[n] = '\0'; |
| p = buf + strcspn(buf, "\r\n"); |
| if (!*p) |
| return NULL; |
| |
| *p = '\0'; |
| if (!(p = strrchr(buf+2, '/')) && !(p = strrchr(buf+2, '\\'))) |
| return NULL; |
| /* strip options */ |
| if ((opt = strchr(p+1, ' '))) |
| *opt = '\0'; |
| return p+1; |
| } |
| |
| /* |
| * exe_only means that we only want to detect .exe files, but not scripts |
| * (which do not have an extension) |
| */ |
| static char *lookup_prog(const char *dir, int dirlen, const char *cmd, |
| int isexe, int exe_only) |
| { |
| char path[MAX_PATH]; |
| snprintf(path, sizeof(path), "%.*s\\%s.exe", dirlen, dir, cmd); |
| |
| if (!isexe && access(path, F_OK) == 0) |
| return xstrdup(path); |
| path[strlen(path)-4] = '\0'; |
| if ((!exe_only || isexe) && access(path, F_OK) == 0) |
| if (!(GetFileAttributes(path) & FILE_ATTRIBUTE_DIRECTORY)) |
| return xstrdup(path); |
| return NULL; |
| } |
| |
| /* |
| * Determines the absolute path of cmd using the split path in path. |
| * If cmd contains a slash or backslash, no lookup is performed. |
| */ |
| static char *path_lookup(const char *cmd, int exe_only) |
| { |
| const char *path; |
| char *prog = NULL; |
| int len = strlen(cmd); |
| int isexe = len >= 4 && !strcasecmp(cmd+len-4, ".exe"); |
| |
| if (strchr(cmd, '/') || strchr(cmd, '\\')) |
| return xstrdup(cmd); |
| |
| path = mingw_getenv("PATH"); |
| if (!path) |
| return NULL; |
| |
| while (!prog) { |
| const char *sep = strchrnul(path, ';'); |
| int dirlen = sep - path; |
| if (dirlen) |
| prog = lookup_prog(path, dirlen, cmd, isexe, exe_only); |
| if (!*sep) |
| break; |
| path = sep + 1; |
| } |
| |
| return prog; |
| } |
| |
| static const wchar_t *wcschrnul(const wchar_t *s, wchar_t c) |
| { |
| while (*s && *s != c) |
| s++; |
| return s; |
| } |
| |
| /* Compare only keys */ |
| static int wenvcmp(const void *a, const void *b) |
| { |
| wchar_t *p = *(wchar_t **)a, *q = *(wchar_t **)b; |
| size_t p_len, q_len; |
| |
| /* Find the keys */ |
| p_len = wcschrnul(p, L'=') - p; |
| q_len = wcschrnul(q, L'=') - q; |
| |
| /* If the length differs, include the shorter key's NUL */ |
| if (p_len < q_len) |
| p_len++; |
| else if (p_len > q_len) |
| p_len = q_len + 1; |
| |
| return _wcsnicmp(p, q, p_len); |
| } |
| |
| /* We need a stable sort to convert the environment between UTF-16 <-> UTF-8 */ |
| #ifndef INTERNAL_QSORT |
| #include "qsort.c" |
| #endif |
| |
| /* |
| * Build an environment block combining the inherited environment |
| * merged with the given list of settings. |
| * |
| * Values of the form "KEY=VALUE" in deltaenv override inherited values. |
| * Values of the form "KEY" in deltaenv delete inherited values. |
| * |
| * Multiple entries in deltaenv for the same key are explicitly allowed. |
| * |
| * We return a contiguous block of UNICODE strings with a final trailing |
| * zero word. |
| */ |
| static wchar_t *make_environment_block(char **deltaenv) |
| { |
| wchar_t *wenv = GetEnvironmentStringsW(), *wdeltaenv, *result, *p; |
| size_t wlen, s, delta_size, size; |
| |
| wchar_t **array = NULL; |
| size_t alloc = 0, nr = 0, i; |
| |
| size = 1; /* for extra NUL at the end */ |
| |
| /* If there is no deltaenv to apply, simply return a copy. */ |
| if (!deltaenv || !*deltaenv) { |
| for (p = wenv; p && *p; ) { |
| size_t s = wcslen(p) + 1; |
| size += s; |
| p += s; |
| } |
| |
| ALLOC_ARRAY(result, size); |
| memcpy(result, wenv, size * sizeof(*wenv)); |
| FreeEnvironmentStringsW(wenv); |
| return result; |
| } |
| |
| /* |
| * If there is a deltaenv, let's accumulate all keys into `array`, |
| * sort them using the stable git_qsort() and then copy, skipping |
| * duplicate keys |
| */ |
| for (p = wenv; p && *p; ) { |
| ALLOC_GROW(array, nr + 1, alloc); |
| s = wcslen(p) + 1; |
| array[nr++] = p; |
| p += s; |
| size += s; |
| } |
| |
| /* (over-)assess size needed for wchar version of deltaenv */ |
| for (delta_size = 0, i = 0; deltaenv[i]; i++) |
| delta_size += strlen(deltaenv[i]) * 2 + 1; |
| ALLOC_ARRAY(wdeltaenv, delta_size); |
| |
| /* convert the deltaenv, appending to array */ |
| for (i = 0, p = wdeltaenv; deltaenv[i]; i++) { |
| ALLOC_GROW(array, nr + 1, alloc); |
| wlen = xutftowcs(p, deltaenv[i], wdeltaenv + delta_size - p); |
| array[nr++] = p; |
| p += wlen + 1; |
| } |
| |
| git_qsort(array, nr, sizeof(*array), wenvcmp); |
| ALLOC_ARRAY(result, size + delta_size); |
| |
| for (p = result, i = 0; i < nr; i++) { |
| /* Skip any duplicate keys; last one wins */ |
| while (i + 1 < nr && !wenvcmp(array + i, array + i + 1)) |
| i++; |
| |
| /* Skip "to delete" entry */ |
| if (!wcschr(array[i], L'=')) |
| continue; |
| |
| size = wcslen(array[i]) + 1; |
| memcpy(p, array[i], size * sizeof(*p)); |
| p += size; |
| } |
| *p = L'\0'; |
| |
| free(array); |
| free(wdeltaenv); |
| FreeEnvironmentStringsW(wenv); |
| return result; |
| } |
| |
| static void do_unset_environment_variables(void) |
| { |
| static int done; |
| char *p = unset_environment_variables; |
| |
| if (done || !p) |
| return; |
| done = 1; |
| |
| for (;;) { |
| char *comma = strchr(p, ','); |
| |
| if (comma) |
| *comma = '\0'; |
| unsetenv(p); |
| if (!comma) |
| break; |
| p = comma + 1; |
| } |
| } |
| |
| struct pinfo_t { |
| struct pinfo_t *next; |
| pid_t pid; |
| HANDLE proc; |
| }; |
| static struct pinfo_t *pinfo = NULL; |
| CRITICAL_SECTION pinfo_cs; |
| |
| static pid_t mingw_spawnve_fd(const char *cmd, const char **argv, char **deltaenv, |
| const char *dir, |
| int prepend_cmd, int fhin, int fhout, int fherr) |
| { |
| STARTUPINFOW si; |
| PROCESS_INFORMATION pi; |
| struct strbuf args; |
| wchar_t wcmd[MAX_PATH], wdir[MAX_PATH], *wargs, *wenvblk = NULL; |
| unsigned flags = CREATE_UNICODE_ENVIRONMENT; |
| BOOL ret; |
| HANDLE cons; |
| |
| do_unset_environment_variables(); |
| |
| /* Determine whether or not we are associated to a console */ |
| cons = CreateFile("CONOUT$", GENERIC_WRITE, |
| FILE_SHARE_WRITE, NULL, OPEN_EXISTING, |
| FILE_ATTRIBUTE_NORMAL, NULL); |
| if (cons == INVALID_HANDLE_VALUE) { |
| /* There is no console associated with this process. |
| * Since the child is a console process, Windows |
| * would normally create a console window. But |
| * since we'll be redirecting std streams, we do |
| * not need the console. |
| * It is necessary to use DETACHED_PROCESS |
| * instead of CREATE_NO_WINDOW to make ssh |
| * recognize that it has no console. |
| */ |
| flags |= DETACHED_PROCESS; |
| } else { |
| /* There is already a console. If we specified |
| * DETACHED_PROCESS here, too, Windows would |
| * disassociate the child from the console. |
| * The same is true for CREATE_NO_WINDOW. |
| * Go figure! |
| */ |
| CloseHandle(cons); |
| } |
| memset(&si, 0, sizeof(si)); |
| si.cb = sizeof(si); |
| si.dwFlags = STARTF_USESTDHANDLES; |
| si.hStdInput = winansi_get_osfhandle(fhin); |
| si.hStdOutput = winansi_get_osfhandle(fhout); |
| si.hStdError = winansi_get_osfhandle(fherr); |
| |
| if (xutftowcs_path(wcmd, cmd) < 0) |
| return -1; |
| if (dir && xutftowcs_path(wdir, dir) < 0) |
| return -1; |
| |
| /* concatenate argv, quoting args as we go */ |
| strbuf_init(&args, 0); |
| if (prepend_cmd) { |
| char *quoted = (char *)quote_arg(cmd); |
| strbuf_addstr(&args, quoted); |
| if (quoted != cmd) |
| free(quoted); |
| } |
| for (; *argv; argv++) { |
| char *quoted = (char *)quote_arg(*argv); |
| if (*args.buf) |
| strbuf_addch(&args, ' '); |
| strbuf_addstr(&args, quoted); |
| if (quoted != *argv) |
| free(quoted); |
| } |
| |
| ALLOC_ARRAY(wargs, st_add(st_mult(2, args.len), 1)); |
| xutftowcs(wargs, args.buf, 2 * args.len + 1); |
| strbuf_release(&args); |
| |
| wenvblk = make_environment_block(deltaenv); |
| |
| memset(&pi, 0, sizeof(pi)); |
| ret = CreateProcessW(wcmd, wargs, NULL, NULL, TRUE, flags, |
| wenvblk, dir ? wdir : NULL, &si, &pi); |
| |
| free(wenvblk); |
| free(wargs); |
| |
| if (!ret) { |
| errno = ENOENT; |
| return -1; |
| } |
| CloseHandle(pi.hThread); |
| |
| /* |
| * The process ID is the human-readable identifier of the process |
| * that we want to present in log and error messages. The handle |
| * is not useful for this purpose. But we cannot close it, either, |
| * because it is not possible to turn a process ID into a process |
| * handle after the process terminated. |
| * Keep the handle in a list for waitpid. |
| */ |
| EnterCriticalSection(&pinfo_cs); |
| { |
| struct pinfo_t *info = xmalloc(sizeof(struct pinfo_t)); |
| info->pid = pi.dwProcessId; |
| info->proc = pi.hProcess; |
| info->next = pinfo; |
| pinfo = info; |
| } |
| LeaveCriticalSection(&pinfo_cs); |
| |
| return (pid_t)pi.dwProcessId; |
| } |
| |
| static pid_t mingw_spawnv(const char *cmd, const char **argv, int prepend_cmd) |
| { |
| return mingw_spawnve_fd(cmd, argv, NULL, NULL, prepend_cmd, 0, 1, 2); |
| } |
| |
| pid_t mingw_spawnvpe(const char *cmd, const char **argv, char **deltaenv, |
| const char *dir, |
| int fhin, int fhout, int fherr) |
| { |
| pid_t pid; |
| char *prog = path_lookup(cmd, 0); |
| |
| if (!prog) { |
| errno = ENOENT; |
| pid = -1; |
| } |
| else { |
| const char *interpr = parse_interpreter(prog); |
| |
| if (interpr) { |
| const char *argv0 = argv[0]; |
| char *iprog = path_lookup(interpr, 1); |
| argv[0] = prog; |
| if (!iprog) { |
| errno = ENOENT; |
| pid = -1; |
| } |
| else { |
| pid = mingw_spawnve_fd(iprog, argv, deltaenv, dir, 1, |
| fhin, fhout, fherr); |
| free(iprog); |
| } |
| argv[0] = argv0; |
| } |
| else |
| pid = mingw_spawnve_fd(prog, argv, deltaenv, dir, 0, |
| fhin, fhout, fherr); |
| free(prog); |
| } |
| return pid; |
| } |
| |
| static int try_shell_exec(const char *cmd, char *const *argv) |
| { |
| const char *interpr = parse_interpreter(cmd); |
| char *prog; |
| int pid = 0; |
| |
| if (!interpr) |
| return 0; |
| prog = path_lookup(interpr, 1); |
| if (prog) { |
| int argc = 0; |
| const char **argv2; |
| while (argv[argc]) argc++; |
| ALLOC_ARRAY(argv2, argc + 1); |
| argv2[0] = (char *)cmd; /* full path to the script file */ |
| memcpy(&argv2[1], &argv[1], sizeof(*argv) * argc); |
| pid = mingw_spawnv(prog, argv2, 1); |
| if (pid >= 0) { |
| int status; |
| if (waitpid(pid, &status, 0) < 0) |
| status = 255; |
| exit(status); |
| } |
| pid = 1; /* indicate that we tried but failed */ |
| free(prog); |
| free(argv2); |
| } |
| return pid; |
| } |
| |
| int mingw_execv(const char *cmd, char *const *argv) |
| { |
| /* check if git_command is a shell script */ |
| if (!try_shell_exec(cmd, argv)) { |
| int pid, status; |
| |
| pid = mingw_spawnv(cmd, (const char **)argv, 0); |
| if (pid < 0) |
| return -1; |
| if (waitpid(pid, &status, 0) < 0) |
| status = 255; |
| exit(status); |
| } |
| return -1; |
| } |
| |
| int mingw_execvp(const char *cmd, char *const *argv) |
| { |
| char *prog = path_lookup(cmd, 0); |
| |
| if (prog) { |
| mingw_execv(prog, argv); |
| free(prog); |
| } else |
| errno = ENOENT; |
| |
| return -1; |
| } |
| |
| int mingw_kill(pid_t pid, int sig) |
| { |
| if (pid > 0 && sig == SIGTERM) { |
| HANDLE h = OpenProcess(PROCESS_TERMINATE, FALSE, pid); |
| |
| if (TerminateProcess(h, -1)) { |
| CloseHandle(h); |
| return 0; |
| } |
| |
| errno = err_win_to_posix(GetLastError()); |
| CloseHandle(h); |
| return -1; |
| } else if (pid > 0 && sig == 0) { |
| HANDLE h = OpenProcess(PROCESS_QUERY_INFORMATION, FALSE, pid); |
| if (h) { |
| CloseHandle(h); |
| return 0; |
| } |
| } |
| |
| errno = EINVAL; |
| return -1; |
| } |
| |
| /* |
| * UTF-8 versions of getenv(), putenv() and unsetenv(). |
| * Internally, they use the CRT's stock UNICODE routines |
| * to avoid data loss. |
| */ |
| char *mingw_getenv(const char *name) |
| { |
| #define GETENV_MAX_RETAIN 30 |
| static char *values[GETENV_MAX_RETAIN]; |
| static int value_counter; |
| int len_key, len_value; |
| wchar_t *w_key; |
| char *value; |
| wchar_t w_value[32768]; |
| |
| if (!name || !*name) |
| return NULL; |
| |
| len_key = strlen(name) + 1; |
| /* We cannot use xcalloc() here because that uses getenv() itself */ |
| w_key = calloc(len_key, sizeof(wchar_t)); |
| if (!w_key) |
| die("Out of memory, (tried to allocate %u wchar_t's)", len_key); |
| xutftowcs(w_key, name, len_key); |
| len_value = GetEnvironmentVariableW(w_key, w_value, ARRAY_SIZE(w_value)); |
| if (!len_value && GetLastError() == ERROR_ENVVAR_NOT_FOUND) { |
| free(w_key); |
| return NULL; |
| } |
| free(w_key); |
| |
| len_value = len_value * 3 + 1; |
| /* We cannot use xcalloc() here because that uses getenv() itself */ |
| value = calloc(len_value, sizeof(char)); |
| if (!value) |
| die("Out of memory, (tried to allocate %u bytes)", len_value); |
| xwcstoutf(value, w_value, len_value); |
| |
| /* |
| * We return `value` which is an allocated value and the caller is NOT |
| * expecting to have to free it, so we keep a round-robin array, |
| * invalidating the buffer after GETENV_MAX_RETAIN getenv() calls. |
| */ |
| free(values[value_counter]); |
| values[value_counter++] = value; |
| if (value_counter >= ARRAY_SIZE(values)) |
| value_counter = 0; |
| |
| return value; |
| } |
| |
| int mingw_putenv(const char *namevalue) |
| { |
| int size; |
| wchar_t *wide, *equal; |
| BOOL result; |
| |
| if (!namevalue || !*namevalue) |
| return 0; |
| |
| size = strlen(namevalue) * 2 + 1; |
| wide = calloc(size, sizeof(wchar_t)); |
| if (!wide) |
| die("Out of memory, (tried to allocate %u wchar_t's)", size); |
| xutftowcs(wide, namevalue, size); |
| equal = wcschr(wide, L'='); |
| if (!equal) |
| result = SetEnvironmentVariableW(wide, NULL); |
| else { |
| *equal = L'\0'; |
| result = SetEnvironmentVariableW(wide, equal + 1); |
| } |
| free(wide); |
| |
| if (!result) |
| errno = err_win_to_posix(GetLastError()); |
| |
| return result ? 0 : -1; |
| } |
| |
| /* |
| * Note, this isn't a complete replacement for getaddrinfo. It assumes |
| * that service contains a numerical port, or that it is null. It |
| * does a simple search using gethostbyname, and returns one IPv4 host |
| * if one was found. |
| */ |
| static int WSAAPI getaddrinfo_stub(const char *node, const char *service, |
| const struct addrinfo *hints, |
| struct addrinfo **res) |
| { |
| struct hostent *h = NULL; |
| struct addrinfo *ai; |
| struct sockaddr_in *sin; |
| |
| if (node) { |
| h = gethostbyname(node); |
| if (!h) |
| return WSAGetLastError(); |
| } |
| |
| ai = xmalloc(sizeof(struct addrinfo)); |
| *res = ai; |
| ai->ai_flags = 0; |
| ai->ai_family = AF_INET; |
| ai->ai_socktype = hints ? hints->ai_socktype : 0; |
| switch (ai->ai_socktype) { |
| case SOCK_STREAM: |
| ai->ai_protocol = IPPROTO_TCP; |
| break; |
| case SOCK_DGRAM: |
| ai->ai_protocol = IPPROTO_UDP; |
| break; |
| default: |
| ai->ai_protocol = 0; |
| break; |
| } |
| ai->ai_addrlen = sizeof(struct sockaddr_in); |
| if (hints && (hints->ai_flags & AI_CANONNAME)) |
| ai->ai_canonname = h ? xstrdup(h->h_name) : NULL; |
| else |
| ai->ai_canonname = NULL; |
| |
| sin = xcalloc(1, ai->ai_addrlen); |
| sin->sin_family = AF_INET; |
| /* Note: getaddrinfo is supposed to allow service to be a string, |
| * which should be looked up using getservbyname. This is |
| * currently not implemented */ |
| if (service) |
| sin->sin_port = htons(atoi(service)); |
| if (h) |
| sin->sin_addr = *(struct in_addr *)h->h_addr; |
| else if (hints && (hints->ai_flags & AI_PASSIVE)) |
| sin->sin_addr.s_addr = INADDR_ANY; |
| else |
| sin->sin_addr.s_addr = INADDR_LOOPBACK; |
| ai->ai_addr = (struct sockaddr *)sin; |
| ai->ai_next = NULL; |
| return 0; |
| } |
| |
| static void WSAAPI freeaddrinfo_stub(struct addrinfo *res) |
| { |
| free(res->ai_canonname); |
| free(res->ai_addr); |
| free(res); |
| } |
| |
| static int WSAAPI getnameinfo_stub(const struct sockaddr *sa, socklen_t salen, |
| char *host, DWORD hostlen, |
| char *serv, DWORD servlen, int flags) |
| { |
| const struct sockaddr_in *sin = (const struct sockaddr_in *)sa; |
| if (sa->sa_family != AF_INET) |
| return EAI_FAMILY; |
| if (!host && !serv) |
| return EAI_NONAME; |
| |
| if (host && hostlen > 0) { |
| struct hostent *ent = NULL; |
| if (!(flags & NI_NUMERICHOST)) |
| ent = gethostbyaddr((const char *)&sin->sin_addr, |
| sizeof(sin->sin_addr), AF_INET); |
| |
| if (ent) |
| snprintf(host, hostlen, "%s", ent->h_name); |
| else if (flags & NI_NAMEREQD) |
| return EAI_NONAME; |
| else |
| snprintf(host, hostlen, "%s", inet_ntoa(sin->sin_addr)); |
| } |
| |
| if (serv && servlen > 0) { |
| struct servent *ent = NULL; |
| if (!(flags & NI_NUMERICSERV)) |
| ent = getservbyport(sin->sin_port, |
| flags & NI_DGRAM ? "udp" : "tcp"); |
| |
| if (ent) |
| snprintf(serv, servlen, "%s", ent->s_name); |
| else |
| snprintf(serv, servlen, "%d", ntohs(sin->sin_port)); |
| } |
| |
| return 0; |
| } |
| |
| static HMODULE ipv6_dll = NULL; |
| static void (WSAAPI *ipv6_freeaddrinfo)(struct addrinfo *res); |
| static int (WSAAPI *ipv6_getaddrinfo)(const char *node, const char *service, |
| const struct addrinfo *hints, |
| struct addrinfo **res); |
| static int (WSAAPI *ipv6_getnameinfo)(const struct sockaddr *sa, socklen_t salen, |
| char *host, DWORD hostlen, |
| char *serv, DWORD servlen, int flags); |
| /* |
| * gai_strerror is an inline function in the ws2tcpip.h header, so we |
| * don't need to try to load that one dynamically. |
| */ |
| |
| static void socket_cleanup(void) |
| { |
| WSACleanup(); |
| if (ipv6_dll) |
| FreeLibrary(ipv6_dll); |
| ipv6_dll = NULL; |
| ipv6_freeaddrinfo = freeaddrinfo_stub; |
| ipv6_getaddrinfo = getaddrinfo_stub; |
| ipv6_getnameinfo = getnameinfo_stub; |
| } |
| |
| static void ensure_socket_initialization(void) |
| { |
| WSADATA wsa; |
| static int initialized = 0; |
| const char *libraries[] = { "ws2_32.dll", "wship6.dll", NULL }; |
| const char **name; |
| |
| if (initialized) |
| return; |
| |
| if (WSAStartup(MAKEWORD(2,2), &wsa)) |
| die("unable to initialize winsock subsystem, error %d", |
| WSAGetLastError()); |
| |
| for (name = libraries; *name; name++) { |
| ipv6_dll = LoadLibraryExA(*name, NULL, |
| LOAD_LIBRARY_SEARCH_SYSTEM32); |
| if (!ipv6_dll) |
| continue; |
| |
| ipv6_freeaddrinfo = (void (WSAAPI *)(struct addrinfo *)) |
| GetProcAddress(ipv6_dll, "freeaddrinfo"); |
| ipv6_getaddrinfo = (int (WSAAPI *)(const char *, const char *, |
| const struct addrinfo *, |
| struct addrinfo **)) |
| GetProcAddress(ipv6_dll, "getaddrinfo"); |
| ipv6_getnameinfo = (int (WSAAPI *)(const struct sockaddr *, |
| socklen_t, char *, DWORD, |
| char *, DWORD, int)) |
| GetProcAddress(ipv6_dll, "getnameinfo"); |
| if (!ipv6_freeaddrinfo || !ipv6_getaddrinfo || !ipv6_getnameinfo) { |
| FreeLibrary(ipv6_dll); |
| ipv6_dll = NULL; |
| } else |
| break; |
| } |
| if (!ipv6_freeaddrinfo || !ipv6_getaddrinfo || !ipv6_getnameinfo) { |
| ipv6_freeaddrinfo = freeaddrinfo_stub; |
| ipv6_getaddrinfo = getaddrinfo_stub; |
| ipv6_getnameinfo = getnameinfo_stub; |
| } |
| |
| atexit(socket_cleanup); |
| initialized = 1; |
| } |
| |
| #undef gethostname |
| int mingw_gethostname(char *name, int namelen) |
| { |
| ensure_socket_initialization(); |
| return gethostname(name, namelen); |
| } |
| |
| #undef gethostbyname |
| struct hostent *mingw_gethostbyname(const char *host) |
| { |
| ensure_socket_initialization(); |
| return gethostbyname(host); |
| } |
| |
| void mingw_freeaddrinfo(struct addrinfo *res) |
| { |
| ipv6_freeaddrinfo(res); |
| } |
| |
| int mingw_getaddrinfo(const char *node, const char *service, |
| const struct addrinfo *hints, struct addrinfo **res) |
| { |
| ensure_socket_initialization(); |
| return ipv6_getaddrinfo(node, service, hints, res); |
| } |
| |
| int mingw_getnameinfo(const struct sockaddr *sa, socklen_t salen, |
| char *host, DWORD hostlen, char *serv, DWORD servlen, |
| int flags) |
| { |
| ensure_socket_initialization(); |
| return ipv6_getnameinfo(sa, salen, host, hostlen, serv, servlen, flags); |
| } |
| |
| int mingw_socket(int domain, int type, int protocol) |
| { |
| int sockfd; |
| SOCKET s; |
| |
| ensure_socket_initialization(); |
| s = WSASocket(domain, type, protocol, NULL, 0, 0); |
| if (s == INVALID_SOCKET) { |
| /* |
| * WSAGetLastError() values are regular BSD error codes |
| * biased by WSABASEERR. |
| * However, strerror() does not know about networking |
| * specific errors, which are values beginning at 38 or so. |
| * Therefore, we choose to leave the biased error code |
| * in errno so that _if_ someone looks up the code somewhere, |
| * then it is at least the number that are usually listed. |
| */ |
| errno = WSAGetLastError(); |
| return -1; |
| } |
| /* convert into a file descriptor */ |
| if ((sockfd = _open_osfhandle(s, O_RDWR|O_BINARY)) < 0) { |
| closesocket(s); |
| return error("unable to make a socket file descriptor: %s", |
| strerror(errno)); |
| } |
| return sockfd; |
| } |
| |
| #undef connect |
| int mingw_connect(int sockfd, struct sockaddr *sa, size_t sz) |
| { |
| SOCKET s = (SOCKET)_get_osfhandle(sockfd); |
| return connect(s, sa, sz); |
| } |
| |
| #undef bind |
| int mingw_bind(int sockfd, struct sockaddr *sa, size_t sz) |
| { |
| SOCKET s = (SOCKET)_get_osfhandle(sockfd); |
| return bind(s, sa, sz); |
| } |
| |
| #undef setsockopt |
| int mingw_setsockopt(int sockfd, int lvl, int optname, void *optval, int optlen) |
| { |
| SOCKET s = (SOCKET)_get_osfhandle(sockfd); |
| return setsockopt(s, lvl, optname, (const char*)optval, optlen); |
| } |
| |
| #undef shutdown |
| int mingw_shutdown(int sockfd, int how) |
| { |
| SOCKET s = (SOCKET)_get_osfhandle(sockfd); |
| return shutdown(s, how); |
| } |
| |
| #undef listen |
| int mingw_listen(int sockfd, int backlog) |
| { |
| SOCKET s = (SOCKET)_get_osfhandle(sockfd); |
| return listen(s, backlog); |
| } |
| |
| #undef accept |
| int mingw_accept(int sockfd1, struct sockaddr *sa, socklen_t *sz) |
| { |
| int sockfd2; |
| |
| SOCKET s1 = (SOCKET)_get_osfhandle(sockfd1); |
| SOCKET s2 = accept(s1, sa, sz); |
| |
| /* convert into a file descriptor */ |
| if ((sockfd2 = _open_osfhandle(s2, O_RDWR|O_BINARY)) < 0) { |
| int err = errno; |
| closesocket(s2); |
| return error("unable to make a socket file descriptor: %s", |
| strerror(err)); |
| } |
| return sockfd2; |
| } |
| |
| #undef rename |
| int mingw_rename(const char *pold, const char *pnew) |
| { |
| DWORD attrs, gle; |
| int tries = 0; |
| wchar_t wpold[MAX_PATH], wpnew[MAX_PATH]; |
| if (xutftowcs_path(wpold, pold) < 0 || xutftowcs_path(wpnew, pnew) < 0) |
| return -1; |
| |
| /* |
| * Try native rename() first to get errno right. |
| * It is based on MoveFile(), which cannot overwrite existing files. |
| */ |
| if (!_wrename(wpold, wpnew)) |
| return 0; |
| if (errno != EEXIST) |
| return -1; |
| repeat: |
| if (MoveFileExW(wpold, wpnew, MOVEFILE_REPLACE_EXISTING)) |
| return 0; |
| /* TODO: translate more errors */ |
| gle = GetLastError(); |
| if (gle == ERROR_ACCESS_DENIED && |
| (attrs = GetFileAttributesW(wpnew)) != INVALID_FILE_ATTRIBUTES) { |
| if (attrs & FILE_ATTRIBUTE_DIRECTORY) { |
| DWORD attrsold = GetFileAttributesW(wpold); |
| if (attrsold == INVALID_FILE_ATTRIBUTES || |
| !(attrsold & FILE_ATTRIBUTE_DIRECTORY)) |
| errno = EISDIR; |
| else if (!_wrmdir(wpnew)) |
| goto repeat; |
| return -1; |
| } |
| if ((attrs & FILE_ATTRIBUTE_READONLY) && |
| SetFileAttributesW(wpnew, attrs & ~FILE_ATTRIBUTE_READONLY)) { |
| if (MoveFileExW(wpold, wpnew, MOVEFILE_REPLACE_EXISTING)) |
| return 0; |
| gle = GetLastError(); |
| /* revert file attributes on failure */ |
| SetFileAttributesW(wpnew, attrs); |
| } |
| } |
| if (tries < ARRAY_SIZE(delay) && gle == ERROR_ACCESS_DENIED) { |
| /* |
| * We assume that some other process had the source or |
| * destination file open at the wrong moment and retry. |
| * In order to give the other process a higher chance to |
| * complete its operation, we give up our time slice now. |
| * If we have to retry again, we do sleep a bit. |
| */ |
| Sleep(delay[tries]); |
| tries++; |
| goto repeat; |
| } |
| if (gle == ERROR_ACCESS_DENIED && |
| ask_yes_no_if_possible("Rename from '%s' to '%s' failed. " |
| "Should I try again?", pold, pnew)) |
| goto repeat; |
| |
| errno = EACCES; |
| return -1; |
| } |
| |
| /* |
| * Note that this doesn't return the actual pagesize, but |
| * the allocation granularity. If future Windows specific git code |
| * needs the real getpagesize function, we need to find another solution. |
| */ |
| int mingw_getpagesize(void) |
| { |
| SYSTEM_INFO si; |
| GetSystemInfo(&si); |
| return si.dwAllocationGranularity; |
| } |
| |
| /* See https://msdn.microsoft.com/en-us/library/windows/desktop/ms724435.aspx */ |
| enum EXTENDED_NAME_FORMAT { |
| NameDisplay = 3, |
| NameUserPrincipal = 8 |
| }; |
| |
| static char *get_extended_user_info(enum EXTENDED_NAME_FORMAT type) |
| { |
| DECLARE_PROC_ADDR(secur32.dll, BOOL, GetUserNameExW, |
| enum EXTENDED_NAME_FORMAT, LPCWSTR, PULONG); |
| static wchar_t wbuffer[1024]; |
| DWORD len; |
| |
| if (!INIT_PROC_ADDR(GetUserNameExW)) |
| return NULL; |
| |
| len = ARRAY_SIZE(wbuffer); |
| if (GetUserNameExW(type, wbuffer, &len)) { |
| char *converted = xmalloc((len *= 3)); |
| if (xwcstoutf(converted, wbuffer, len) >= 0) |
| return converted; |
| free(converted); |
| } |
| |
| return NULL; |
| } |
| |
| char *mingw_query_user_email(void) |
| { |
| return get_extended_user_info(NameUserPrincipal); |
| } |
| |
| struct passwd *getpwuid(int uid) |
| { |
| static unsigned initialized; |
| static char user_name[100]; |
| static struct passwd *p; |
| DWORD len; |
| |
| if (initialized) |
| return p; |
| |
| len = sizeof(user_name); |
| if (!GetUserName(user_name, &len)) { |
| initialized = 1; |
| return NULL; |
| } |
| |
| p = xmalloc(sizeof(*p)); |
| p->pw_name = user_name; |
| p->pw_gecos = get_extended_user_info(NameDisplay); |
| if (!p->pw_gecos) |
| p->pw_gecos = "unknown"; |
| p->pw_dir = NULL; |
| |
| initialized = 1; |
| return p; |
| } |
| |
| static HANDLE timer_event; |
| static HANDLE timer_thread; |
| static int timer_interval; |
| static int one_shot; |
| static sig_handler_t timer_fn = SIG_DFL, sigint_fn = SIG_DFL; |
| |
| /* The timer works like this: |
| * The thread, ticktack(), is a trivial routine that most of the time |
| * only waits to receive the signal to terminate. The main thread tells |
| * the thread to terminate by setting the timer_event to the signalled |
| * state. |
| * But ticktack() interrupts the wait state after the timer's interval |
| * length to call the signal handler. |
| */ |
| |
| static unsigned __stdcall ticktack(void *dummy) |
| { |
| while (WaitForSingleObject(timer_event, timer_interval) == WAIT_TIMEOUT) { |
| mingw_raise(SIGALRM); |
| if (one_shot) |
| break; |
| } |
| return 0; |
| } |
| |
| static int start_timer_thread(void) |
| { |
| timer_event = CreateEvent(NULL, FALSE, FALSE, NULL); |
| if (timer_event) { |
| timer_thread = (HANDLE) _beginthreadex(NULL, 0, ticktack, NULL, 0, NULL); |
| if (!timer_thread ) |
| return errno = ENOMEM, |
| error("cannot start timer thread"); |
| } else |
| return errno = ENOMEM, |
| error("cannot allocate resources for timer"); |
| return 0; |
| } |
| |
| static void stop_timer_thread(void) |
| { |
| if (timer_event) |
| SetEvent(timer_event); /* tell thread to terminate */ |
| if (timer_thread) { |
| int rc = WaitForSingleObject(timer_thread, 1000); |
| if (rc == WAIT_TIMEOUT) |
| error("timer thread did not terminate timely"); |
| else if (rc != WAIT_OBJECT_0) |
| error("waiting for timer thread failed: %lu", |
| GetLastError()); |
| CloseHandle(timer_thread); |
| } |
| if (timer_event) |
| CloseHandle(timer_event); |
| timer_event = NULL; |
| timer_thread = NULL; |
| } |
| |
| static inline int is_timeval_eq(const struct timeval *i1, const struct timeval *i2) |
| { |
| return i1->tv_sec == i2->tv_sec && i1->tv_usec == i2->tv_usec; |
| } |
| |
| int setitimer(int type, struct itimerval *in, struct itimerval *out) |
| { |
| static const struct timeval zero; |
| static int atexit_done; |
| |
| if (out != NULL) |
| return errno = EINVAL, |
| error("setitimer param 3 != NULL not implemented"); |
| if (!is_timeval_eq(&in->it_interval, &zero) && |
| !is_timeval_eq(&in->it_interval, &in->it_value)) |
| return errno = EINVAL, |
| error("setitimer: it_interval must be zero or eq it_value"); |
| |
| if (timer_thread) |
| stop_timer_thread(); |
| |
| if (is_timeval_eq(&in->it_value, &zero) && |
| is_timeval_eq(&in->it_interval, &zero)) |
| return 0; |
| |
| timer_interval = in->it_value.tv_sec * 1000 + in->it_value.tv_usec / 1000; |
| one_shot = is_timeval_eq(&in->it_interval, &zero); |
| if (!atexit_done) { |
| atexit(stop_timer_thread); |
| atexit_done = 1; |
| } |
| return start_timer_thread(); |
| } |
| |
| int sigaction(int sig, struct sigaction *in, struct sigaction *out) |
| { |
| if (sig != SIGALRM) |
| return errno = EINVAL, |
| error("sigaction only implemented for SIGALRM"); |
| if (out != NULL) |
| return errno = EINVAL, |
| error("sigaction: param 3 != NULL not implemented"); |
| |
| timer_fn = in->sa_handler; |
| return 0; |
| } |
| |
| #undef signal |
| sig_handler_t mingw_signal(int sig, sig_handler_t handler) |
| { |
| sig_handler_t old; |
| |
| switch (sig) { |
| case SIGALRM: |
| old = timer_fn; |
| timer_fn = handler; |
| break; |
| |
| case SIGINT: |
| old = sigint_fn; |
| sigint_fn = handler; |
| break; |
| |
| default: |
| return signal(sig, handler); |
| } |
| |
| return old; |
| } |
| |
| #undef raise |
| int mingw_raise(int sig) |
| { |
| switch (sig) { |
| case SIGALRM: |
| if (timer_fn == SIG_DFL) { |
| if (isatty(STDERR_FILENO)) |
| fputs("Alarm clock\n", stderr); |
| exit(128 + SIGALRM); |
| } else if (timer_fn != SIG_IGN) |
| timer_fn(SIGALRM); |
| return 0; |
| |
| case SIGINT: |
| if (sigint_fn == SIG_DFL) |
| exit(128 + SIGINT); |
| else if (sigint_fn != SIG_IGN) |
| sigint_fn(SIGINT); |
| return 0; |
| |
| default: |
| return raise(sig); |
| } |
| } |
| |
| int link(const char *oldpath, const char *newpath) |
| { |
| wchar_t woldpath[MAX_PATH], wnewpath[MAX_PATH]; |
| if (xutftowcs_path(woldpath, oldpath) < 0 || |
| xutftowcs_path(wnewpath, newpath) < 0) |
| return -1; |
| |
| if (!CreateHardLinkW(wnewpath, woldpath, NULL)) { |
| errno = err_win_to_posix(GetLastError()); |
| return -1; |
| } |
| return 0; |
| } |
| |
| pid_t waitpid(pid_t pid, int *status, int options) |
| { |
| HANDLE h = OpenProcess(SYNCHRONIZE | PROCESS_QUERY_INFORMATION, |
| FALSE, pid); |
| if (!h) { |
| errno = ECHILD; |
| return -1; |
| } |
| |
| if (pid > 0 && options & WNOHANG) { |
| if (WAIT_OBJECT_0 != WaitForSingleObject(h, 0)) { |
| CloseHandle(h); |
| return 0; |
| } |
| options &= ~WNOHANG; |
| } |
| |
| if (options == 0) { |
| struct pinfo_t **ppinfo; |
| if (WaitForSingleObject(h, INFINITE) != WAIT_OBJECT_0) { |
| CloseHandle(h); |
| return 0; |
| } |
| |
| if (status) |
| GetExitCodeProcess(h, (LPDWORD)status); |
| |
| EnterCriticalSection(&pinfo_cs); |
| |
| ppinfo = &pinfo; |
| while (*ppinfo) { |
| struct pinfo_t *info = *ppinfo; |
| if (info->pid == pid) { |
| CloseHandle(info->proc); |
| *ppinfo = info->next; |
| free(info); |
| break; |
| } |
| ppinfo = &info->next; |
| } |
| |
| LeaveCriticalSection(&pinfo_cs); |
| |
| CloseHandle(h); |
| return pid; |
| } |
| CloseHandle(h); |
| |
| errno = EINVAL; |
| return -1; |
| } |
| |
| int mingw_skip_dos_drive_prefix(char **path) |
| { |
| int ret = has_dos_drive_prefix(*path); |
| *path += ret; |
| return ret; |
| } |
| |
| int mingw_offset_1st_component(const char *path) |
| { |
| char *pos = (char *)path; |
| |
| /* unc paths */ |
| if (!skip_dos_drive_prefix(&pos) && |
| is_dir_sep(pos[0]) && is_dir_sep(pos[1])) { |
| /* skip server name */ |
| pos = strpbrk(pos + 2, "\\/"); |
| if (!pos) |
| return 0; /* Error: malformed unc path */ |
| |
| do { |
| pos++; |
| } while (*pos && !is_dir_sep(*pos)); |
| } |
| |
| return pos + is_dir_sep(*pos) - path; |
| } |
| |
| int xutftowcsn(wchar_t *wcs, const char *utfs, size_t wcslen, int utflen) |
| { |
| int upos = 0, wpos = 0; |
| const unsigned char *utf = (const unsigned char*) utfs; |
| if (!utf || !wcs || wcslen < 1) { |
| errno = EINVAL; |
| return -1; |
| } |
| /* reserve space for \0 */ |
| wcslen--; |
| if (utflen < 0) |
| utflen = INT_MAX; |
| |
| while (upos < utflen) { |
| int c = utf[upos++] & 0xff; |
| if (utflen == INT_MAX && c == 0) |
| break; |
| |
| if (wpos >= wcslen) { |
| wcs[wpos] = 0; |
| errno = ERANGE; |
| return -1; |
| } |
| |
| if (c < 0x80) { |
| /* ASCII */ |
| wcs[wpos++] = c; |
| } else if (c >= 0xc2 && c < 0xe0 && upos < utflen && |
| (utf[upos] & 0xc0) == 0x80) { |
| /* 2-byte utf-8 */ |
| c = ((c & 0x1f) << 6); |
| c |= (utf[upos++] & 0x3f); |
| wcs[wpos++] = c; |
| } else if (c >= 0xe0 && c < 0xf0 && upos + 1 < utflen && |
| !(c == 0xe0 && utf[upos] < 0xa0) && /* over-long encoding */ |
| (utf[upos] & 0xc0) == 0x80 && |
| (utf[upos + 1] & 0xc0) == 0x80) { |
| /* 3-byte utf-8 */ |
| c = ((c & 0x0f) << 12); |
| c |= ((utf[upos++] & 0x3f) << 6); |
| c |= (utf[upos++] & 0x3f); |
| wcs[wpos++] = c; |
| } else if (c >= 0xf0 && c < 0xf5 && upos + 2 < utflen && |
| wpos + 1 < wcslen && |
| !(c == 0xf0 && utf[upos] < 0x90) && /* over-long encoding */ |
| !(c == 0xf4 && utf[upos] >= 0x90) && /* > \u10ffff */ |
| (utf[upos] & 0xc0) == 0x80 && |
| (utf[upos + 1] & 0xc0) == 0x80 && |
| (utf[upos + 2] & 0xc0) == 0x80) { |
| /* 4-byte utf-8: convert to \ud8xx \udcxx surrogate pair */ |
| c = ((c & 0x07) << 18); |
| c |= ((utf[upos++] & 0x3f) << 12); |
| c |= ((utf[upos++] & 0x3f) << 6); |
| c |= (utf[upos++] & 0x3f); |
| c -= 0x10000; |
| wcs[wpos++] = 0xd800 | (c >> 10); |
| wcs[wpos++] = 0xdc00 | (c & 0x3ff); |
| } else if (c >= 0xa0) { |
| /* invalid utf-8 byte, printable unicode char: convert 1:1 */ |
| wcs[wpos++] = c; |
| } else { |
| /* invalid utf-8 byte, non-printable unicode: convert to hex */ |
| static const char *hex = "0123456789abcdef"; |
| wcs[wpos++] = hex[c >> 4]; |
| if (wpos < wcslen) |
| wcs[wpos++] = hex[c & 0x0f]; |
| } |
| } |
| wcs[wpos] = 0; |
| return wpos; |
| } |
| |
| int xwcstoutf(char *utf, const wchar_t *wcs, size_t utflen) |
| { |
| if (!wcs || !utf || utflen < 1) { |
| errno = EINVAL; |
| return -1; |
| } |
| utflen = WideCharToMultiByte(CP_UTF8, 0, wcs, -1, utf, utflen, NULL, NULL); |
| if (utflen) |
| return utflen - 1; |
| errno = ERANGE; |
| return -1; |
| } |
| |
| static void setup_windows_environment(void) |
| { |
| char *tmp = getenv("TMPDIR"); |
| |
| /* on Windows it is TMP and TEMP */ |
| if (!tmp) { |
| if (!(tmp = getenv("TMP"))) |
| tmp = getenv("TEMP"); |
| if (tmp) { |
| setenv("TMPDIR", tmp, 1); |
| tmp = getenv("TMPDIR"); |
| } |
| } |
| |
| if (tmp) { |
| /* |
| * Convert all dir separators to forward slashes, |
| * to help shell commands called from the Git |
| * executable (by not mistaking the dir separators |
| * for escape characters). |
| */ |
| convert_slashes(tmp); |
| } |
| |
| /* simulate TERM to enable auto-color (see color.c) */ |
| if (!getenv("TERM")) |
| setenv("TERM", "cygwin", 1); |
| } |
| |
| /* |
| * Disable MSVCRT command line wildcard expansion (__getmainargs called from |
| * mingw startup code, see init.c in mingw runtime). |
| */ |
| int _CRT_glob = 0; |
| |
| typedef struct { |
| int newmode; |
| } _startupinfo; |
| |
| extern int __wgetmainargs(int *argc, wchar_t ***argv, wchar_t ***env, int glob, |
| _startupinfo *si); |
| |
| static NORETURN void die_startup(void) |
| { |
| fputs("fatal: not enough memory for initialization", stderr); |
| exit(128); |
| } |
| |
| static void *malloc_startup(size_t size) |
| { |
| void *result = malloc(size); |
| if (!result) |
| die_startup(); |
| return result; |
| } |
| |
| static char *wcstoutfdup_startup(char *buffer, const wchar_t *wcs, size_t len) |
| { |
| len = xwcstoutf(buffer, wcs, len) + 1; |
| return memcpy(malloc_startup(len), buffer, len); |
| } |
| |
| static void maybe_redirect_std_handle(const wchar_t *key, DWORD std_id, int fd, |
| DWORD desired_access, DWORD flags) |
| { |
| DWORD create_flag = fd ? OPEN_ALWAYS : OPEN_EXISTING; |
| wchar_t buf[MAX_PATH]; |
| DWORD max = ARRAY_SIZE(buf); |
| HANDLE handle; |
| DWORD ret = GetEnvironmentVariableW(key, buf, max); |
| |
| if (!ret || ret >= max) |
| return; |
| |
| /* make sure this does not leak into child processes */ |
| SetEnvironmentVariableW(key, NULL); |
| if (!wcscmp(buf, L"off")) { |
| close(fd); |
| handle = GetStdHandle(std_id); |
| if (handle != INVALID_HANDLE_VALUE) |
| CloseHandle(handle); |
| return; |
| } |
| if (std_id == STD_ERROR_HANDLE && !wcscmp(buf, L"2>&1")) { |
| handle = GetStdHandle(STD_OUTPUT_HANDLE); |
| if (handle == INVALID_HANDLE_VALUE) { |
| close(fd); |
| handle = GetStdHandle(std_id); |
| if (handle != INVALID_HANDLE_VALUE) |
| CloseHandle(handle); |
| } else { |
| int new_fd = _open_osfhandle((intptr_t)handle, O_BINARY); |
| SetStdHandle(std_id, handle); |
| dup2(new_fd, fd); |
| /* do *not* close the new_fd: that would close stdout */ |
| } |
| return; |
| } |
| handle = CreateFileW(buf, desired_access, 0, NULL, create_flag, |
| flags, NULL); |
| if (handle != INVALID_HANDLE_VALUE) { |
| int new_fd = _open_osfhandle((intptr_t)handle, O_BINARY); |
| SetStdHandle(std_id, handle); |
| dup2(new_fd, fd); |
| close(new_fd); |
| } |
| } |
| |
| static void maybe_redirect_std_handles(void) |
| { |
| maybe_redirect_std_handle(L"GIT_REDIRECT_STDIN", STD_INPUT_HANDLE, 0, |
| GENERIC_READ, FILE_ATTRIBUTE_NORMAL); |
| maybe_redirect_std_handle(L"GIT_REDIRECT_STDOUT", STD_OUTPUT_HANDLE, 1, |
| GENERIC_WRITE, FILE_ATTRIBUTE_NORMAL); |
| maybe_redirect_std_handle(L"GIT_REDIRECT_STDERR", STD_ERROR_HANDLE, 2, |
| GENERIC_WRITE, FILE_FLAG_NO_BUFFERING); |
| } |
| |
| void mingw_startup(void) |
| { |
| int i, maxlen, argc; |
| char *buffer; |
| wchar_t **wenv, **wargv; |
| _startupinfo si; |
| |
| maybe_redirect_std_handles(); |
| |
| /* get wide char arguments and environment */ |
| si.newmode = 0; |
| if (__wgetmainargs(&argc, &wargv, &wenv, _CRT_glob, &si) < 0) |
| die_startup(); |
| |
| /* determine size of argv and environ conversion buffer */ |
| maxlen = wcslen(wargv[0]); |
| for (i = 1; i < argc; i++) |
| maxlen = max(maxlen, wcslen(wargv[i])); |
| |
| /* allocate buffer (wchar_t encodes to max 3 UTF-8 bytes) */ |
| maxlen = 3 * maxlen + 1; |
| buffer = malloc_startup(maxlen); |
| |
| /* convert command line arguments and environment to UTF-8 */ |
| for (i = 0; i < argc; i++) |
| __argv[i] = wcstoutfdup_startup(buffer, wargv[i], maxlen); |
| free(buffer); |
| |
| /* fix Windows specific environment settings */ |
| setup_windows_environment(); |
| |
| unset_environment_variables = xstrdup("PERL5LIB"); |
| |
| /* initialize critical section for waitpid pinfo_t list */ |
| InitializeCriticalSection(&pinfo_cs); |
| |
| /* set up default file mode and file modes for stdin/out/err */ |
| _fmode = _O_BINARY; |
| _setmode(_fileno(stdin), _O_BINARY); |
| _setmode(_fileno(stdout), _O_BINARY); |
| _setmode(_fileno(stderr), _O_BINARY); |
| |
| /* initialize Unicode console */ |
| winansi_init(); |
| } |
| |
| int uname(struct utsname *buf) |
| { |
| unsigned v = (unsigned)GetVersion(); |
| memset(buf, 0, sizeof(*buf)); |
| xsnprintf(buf->sysname, sizeof(buf->sysname), "Windows"); |
| xsnprintf(buf->release, sizeof(buf->release), |
| "%u.%u", v & 0xff, (v >> 8) & 0xff); |
| /* assuming NT variants only.. */ |
| xsnprintf(buf->version, sizeof(buf->version), |
| "%u", (v >> 16) & 0x7fff); |
| return 0; |
| } |