| git-reset(1) |
| ============ |
| |
| NAME |
| ---- |
| git-reset - Reset current HEAD to the specified state |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git reset' [-q] [<tree-ish>] [--] <pathspec>... |
| 'git reset' [-q] [--pathspec-from-file=<file> [--pathspec-file-nul]] [<tree-ish>] |
| 'git reset' (--patch | -p) [<tree-ish>] [--] [<pathspec>...] |
| 'git reset' [--soft | --mixed [-N] | --hard | --merge | --keep] [-q] [<commit>] |
| |
| DESCRIPTION |
| ----------- |
| In the first three forms, copy entries from `<tree-ish>` to the index. |
| In the last form, set the current branch head (`HEAD`) to `<commit>`, |
| optionally modifying index and working tree to match. |
| The `<tree-ish>`/`<commit>` defaults to `HEAD` in all forms. |
| |
| 'git reset' [-q] [<tree-ish>] [--] <pathspec>...:: |
| 'git reset' [-q] [--pathspec-from-file=<file> [--pathspec-file-nul]] [<tree-ish>]:: |
| These forms reset the index entries for all paths that match the |
| `<pathspec>` to their state at `<tree-ish>`. (It does not affect |
| the working tree or the current branch.) |
| + |
| This means that `git reset <pathspec>` is the opposite of `git add |
| <pathspec>`. This command is equivalent to |
| `git restore [--source=<tree-ish>] --staged <pathspec>...`. |
| + |
| After running `git reset <pathspec>` to update the index entry, you can |
| use linkgit:git-restore[1] to check the contents out of the index to |
| the working tree. Alternatively, using linkgit:git-restore[1] |
| and specifying a commit with `--source`, you |
| can copy the contents of a path out of a commit to the index and to the |
| working tree in one go. |
| |
| 'git reset' (--patch | -p) [<tree-ish>] [--] [<pathspec>...]:: |
| Interactively select hunks in the difference between the index |
| and `<tree-ish>` (defaults to `HEAD`). The chosen hunks are applied |
| in reverse to the index. |
| + |
| This means that `git reset -p` is the opposite of `git add -p`, i.e. |
| you can use it to selectively reset hunks. See the ``Interactive Mode'' |
| section of linkgit:git-add[1] to learn how to operate the `--patch` mode. |
| |
| 'git reset' [<mode>] [<commit>]:: |
| This form resets the current branch head to `<commit>` and |
| possibly updates the index (resetting it to the tree of `<commit>`) and |
| the working tree depending on `<mode>`. If `<mode>` is omitted, |
| defaults to `--mixed`. The `<mode>` must be one of the following: |
| + |
| -- |
| --soft:: |
| Does not touch the index file or the working tree at all (but |
| resets the head to `<commit>`, just like all modes do). This leaves |
| all your changed files "Changes to be committed", as `git status` |
| would put it. |
| |
| --mixed:: |
| Resets the index but not the working tree (i.e., the changed files |
| are preserved but not marked for commit) and reports what has not |
| been updated. This is the default action. |
| + |
| If `-N` is specified, removed paths are marked as intent-to-add (see |
| linkgit:git-add[1]). |
| |
| --hard:: |
| Resets the index and working tree. Any changes to tracked files in the |
| working tree since `<commit>` are discarded. |
| |
| --merge:: |
| Resets the index and updates the files in the working tree that are |
| different between `<commit>` and `HEAD`, but keeps those which are |
| different between the index and working tree (i.e. which have changes |
| which have not been added). |
| If a file that is different between `<commit>` and the index has |
| unstaged changes, reset is aborted. |
| + |
| In other words, `--merge` does something like a `git read-tree -u -m <commit>`, |
| but carries forward unmerged index entries. |
| |
| --keep:: |
| Resets index entries and updates files in the working tree that are |
| different between `<commit>` and `HEAD`. |
| If a file that is different between `<commit>` and `HEAD` has local |
| changes, reset is aborted. |
| -- |
| |
| See "Reset, restore and revert" in linkgit:git[1] for the differences |
| between the three commands. |
| |
| |
| OPTIONS |
| ------- |
| |
| -q:: |
| --quiet:: |
| --no-quiet:: |
| Be quiet, only report errors. The default behavior is set by the |
| `reset.quiet` config option. `--quiet` and `--no-quiet` will |
| override the default behavior. |
| |
| --pathspec-from-file=<file>:: |
| Pathspec is passed in `<file>` instead of commandline args. If |
| `<file>` is exactly `-` then standard input is used. Pathspec |
| elements are separated by LF or CR/LF. Pathspec elements can be |
| quoted as explained for the configuration variable `core.quotePath` |
| (see linkgit:git-config[1]). See also `--pathspec-file-nul` and |
| global `--literal-pathspecs`. |
| |
| --pathspec-file-nul:: |
| Only meaningful with `--pathspec-from-file`. Pathspec elements are |
| separated with NUL character and all other characters are taken |
| literally (including newlines and quotes). |
| |
| \--:: |
| Do not interpret any more arguments as options. |
| |
| <pathspec>...:: |
| Limits the paths affected by the operation. |
| + |
| For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. |
| |
| EXAMPLES |
| -------- |
| |
| Undo add:: |
| + |
| ------------ |
| $ edit <1> |
| $ git add frotz.c filfre.c |
| $ mailx <2> |
| $ git reset <3> |
| $ git pull git://info.example.com/ nitfol <4> |
| ------------ |
| + |
| <1> You are happily working on something, and find the changes |
| in these files are in good order. You do not want to see them |
| when you run `git diff`, because you plan to work on other files |
| and changes with these files are distracting. |
| <2> Somebody asks you to pull, and the changes sound worthy of merging. |
| <3> However, you already dirtied the index (i.e. your index does |
| not match the `HEAD` commit). But you know the pull you are going |
| to make does not affect `frotz.c` or `filfre.c`, so you revert the |
| index changes for these two files. Your changes in working tree |
| remain there. |
| <4> Then you can pull and merge, leaving `frotz.c` and `filfre.c` |
| changes still in the working tree. |
| |
| Undo a commit and redo:: |
| + |
| ------------ |
| $ git commit ... |
| $ git reset --soft HEAD^ <1> |
| $ edit <2> |
| $ git commit -a -c ORIG_HEAD <3> |
| ------------ |
| + |
| <1> This is most often done when you remembered what you |
| just committed is incomplete, or you misspelled your commit |
| message, or both. Leaves working tree as it was before "reset". |
| <2> Make corrections to working tree files. |
| <3> "reset" copies the old head to `.git/ORIG_HEAD`; redo the |
| commit by starting with its log message. If you do not need to |
| edit the message further, you can give `-C` option instead. |
| + |
| See also the `--amend` option to linkgit:git-commit[1]. |
| |
| Undo a commit, making it a topic branch:: |
| + |
| ------------ |
| $ git branch topic/wip <1> |
| $ git reset --hard HEAD~3 <2> |
| $ git switch topic/wip <3> |
| ------------ |
| + |
| <1> You have made some commits, but realize they were premature |
| to be in the `master` branch. You want to continue polishing |
| them in a topic branch, so create `topic/wip` branch off of the |
| current `HEAD`. |
| <2> Rewind the master branch to get rid of those three commits. |
| <3> Switch to `topic/wip` branch and keep working. |
| |
| Undo commits permanently:: |
| + |
| ------------ |
| $ git commit ... |
| $ git reset --hard HEAD~3 <1> |
| ------------ |
| + |
| <1> The last three commits (`HEAD`, `HEAD^`, and `HEAD~2`) were bad |
| and you do not want to ever see them again. Do *not* do this if |
| you have already given these commits to somebody else. (See the |
| "RECOVERING FROM UPSTREAM REBASE" section in linkgit:git-rebase[1] |
| for the implications of doing so.) |
| |
| Undo a merge or pull:: |
| + |
| ------------ |
| $ git pull <1> |
| Auto-merging nitfol |
| CONFLICT (content): Merge conflict in nitfol |
| Automatic merge failed; fix conflicts and then commit the result. |
| $ git reset --hard <2> |
| $ git pull . topic/branch <3> |
| Updating from 41223... to 13134... |
| Fast-forward |
| $ git reset --hard ORIG_HEAD <4> |
| ------------ |
| + |
| <1> Try to update from the upstream resulted in a lot of |
| conflicts; you were not ready to spend a lot of time merging |
| right now, so you decide to do that later. |
| <2> "pull" has not made merge commit, so `git reset --hard` |
| which is a synonym for `git reset --hard HEAD` clears the mess |
| from the index file and the working tree. |
| <3> Merge a topic branch into the current branch, which resulted |
| in a fast-forward. |
| <4> But you decided that the topic branch is not ready for public |
| consumption yet. "pull" or "merge" always leaves the original |
| tip of the current branch in `ORIG_HEAD`, so resetting hard to it |
| brings your index file and the working tree back to that state, |
| and resets the tip of the branch to that commit. |
| |
| Undo a merge or pull inside a dirty working tree:: |
| + |
| ------------ |
| $ git pull <1> |
| Auto-merging nitfol |
| Merge made by recursive. |
| nitfol | 20 +++++---- |
| ... |
| $ git reset --merge ORIG_HEAD <2> |
| ------------ |
| + |
| <1> Even if you may have local modifications in your |
| working tree, you can safely say `git pull` when you know |
| that the change in the other branch does not overlap with |
| them. |
| <2> After inspecting the result of the merge, you may find |
| that the change in the other branch is unsatisfactory. Running |
| `git reset --hard ORIG_HEAD` will let you go back to where you |
| were, but it will discard your local changes, which you do not |
| want. `git reset --merge` keeps your local changes. |
| |
| |
| Interrupted workflow:: |
| + |
| Suppose you are interrupted by an urgent fix request while you |
| are in the middle of a large change. The files in your |
| working tree are not in any shape to be committed yet, but you |
| need to get to the other branch for a quick bugfix. |
| + |
| ------------ |
| $ git switch feature ;# you were working in "feature" branch and |
| $ work work work ;# got interrupted |
| $ git commit -a -m "snapshot WIP" <1> |
| $ git switch master |
| $ fix fix fix |
| $ git commit ;# commit with real log |
| $ git switch feature |
| $ git reset --soft HEAD^ ;# go back to WIP state <2> |
| $ git reset <3> |
| ------------ |
| + |
| <1> This commit will get blown away so a throw-away log message is OK. |
| <2> This removes the 'WIP' commit from the commit history, and sets |
| your working tree to the state just before you made that snapshot. |
| <3> At this point the index file still has all the WIP changes you |
| committed as 'snapshot WIP'. This updates the index to show your |
| WIP files as uncommitted. |
| + |
| See also linkgit:git-stash[1]. |
| |
| Reset a single file in the index:: |
| + |
| Suppose you have added a file to your index, but later decide you do not |
| want to add it to your commit. You can remove the file from the index |
| while keeping your changes with git reset. |
| + |
| ------------ |
| $ git reset -- frotz.c <1> |
| $ git commit -m "Commit files in index" <2> |
| $ git add frotz.c <3> |
| ------------ |
| + |
| <1> This removes the file from the index while keeping it in the working |
| directory. |
| <2> This commits all other changes in the index. |
| <3> Adds the file to the index again. |
| |
| Keep changes in working tree while discarding some previous commits:: |
| + |
| Suppose you are working on something and you commit it, and then you |
| continue working a bit more, but now you think that what you have in |
| your working tree should be in another branch that has nothing to do |
| with what you committed previously. You can start a new branch and |
| reset it while keeping the changes in your working tree. |
| + |
| ------------ |
| $ git tag start |
| $ git switch -c branch1 |
| $ edit |
| $ git commit ... <1> |
| $ edit |
| $ git switch -c branch2 <2> |
| $ git reset --keep start <3> |
| ------------ |
| + |
| <1> This commits your first edits in `branch1`. |
| <2> In the ideal world, you could have realized that the earlier |
| commit did not belong to the new topic when you created and switched |
| to `branch2` (i.e. `git switch -c branch2 start`), but nobody is |
| perfect. |
| <3> But you can use `reset --keep` to remove the unwanted commit after |
| you switched to `branch2`. |
| |
| Split a commit apart into a sequence of commits:: |
| + |
| Suppose that you have created lots of logically separate changes and committed |
| them together. Then, later you decide that it might be better to have each |
| logical chunk associated with its own commit. You can use git reset to rewind |
| history without changing the contents of your local files, and then successively |
| use `git add -p` to interactively select which hunks to include into each commit, |
| using `git commit -c` to pre-populate the commit message. |
| + |
| ------------ |
| $ git reset -N HEAD^ <1> |
| $ git add -p <2> |
| $ git diff --cached <3> |
| $ git commit -c HEAD@{1} <4> |
| ... <5> |
| $ git add ... <6> |
| $ git diff --cached <7> |
| $ git commit ... <8> |
| ------------ |
| + |
| <1> First, reset the history back one commit so that we remove the original |
| commit, but leave the working tree with all the changes. The -N ensures |
| that any new files added with `HEAD` are still marked so that `git add -p` |
| will find them. |
| <2> Next, we interactively select diff hunks to add using the `git add -p` |
| facility. This will ask you about each diff hunk in sequence and you can |
| use simple commands such as "yes, include this", "No don't include this" |
| or even the very powerful "edit" facility. |
| <3> Once satisfied with the hunks you want to include, you should verify what |
| has been prepared for the first commit by using `git diff --cached`. This |
| shows all the changes that have been moved into the index and are about |
| to be committed. |
| <4> Next, commit the changes stored in the index. The `-c` option specifies to |
| pre-populate the commit message from the original message that you started |
| with in the first commit. This is helpful to avoid retyping it. The |
| `HEAD@{1}` is a special notation for the commit that `HEAD` used to be at |
| prior to the original reset commit (1 change ago). |
| See linkgit:git-reflog[1] for more details. You may also use any other |
| valid commit reference. |
| <5> You can repeat steps 2-4 multiple times to break the original code into |
| any number of commits. |
| <6> Now you've split out many of the changes into their own commits, and might |
| no longer use the patch mode of `git add`, in order to select all remaining |
| uncommitted changes. |
| <7> Once again, check to verify that you've included what you want to. You may |
| also wish to verify that git diff doesn't show any remaining changes to be |
| committed later. |
| <8> And finally create the final commit. |
| |
| |
| DISCUSSION |
| ---------- |
| |
| The tables below show what happens when running: |
| |
| ---------- |
| git reset --option target |
| ---------- |
| |
| to reset the `HEAD` to another commit (`target`) with the different |
| reset options depending on the state of the files. |
| |
| In these tables, `A`, `B`, `C` and `D` are some different states of a |
| file. For example, the first line of the first table means that if a |
| file is in state `A` in the working tree, in state `B` in the index, in |
| state `C` in `HEAD` and in state `D` in the target, then `git reset --soft |
| target` will leave the file in the working tree in state `A` and in the |
| index in state `B`. It resets (i.e. moves) the `HEAD` (i.e. the tip of |
| the current branch, if you are on one) to `target` (which has the file |
| in state `D`). |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| A B C D --soft A B D |
| --mixed A D D |
| --hard D D D |
| --merge (disallowed) |
| --keep (disallowed) |
| .... |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| A B C C --soft A B C |
| --mixed A C C |
| --hard C C C |
| --merge (disallowed) |
| --keep A C C |
| .... |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| B B C D --soft B B D |
| --mixed B D D |
| --hard D D D |
| --merge D D D |
| --keep (disallowed) |
| .... |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| B B C C --soft B B C |
| --mixed B C C |
| --hard C C C |
| --merge C C C |
| --keep B C C |
| .... |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| B C C D --soft B C D |
| --mixed B D D |
| --hard D D D |
| --merge (disallowed) |
| --keep (disallowed) |
| .... |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| B C C C --soft B C C |
| --mixed B C C |
| --hard C C C |
| --merge B C C |
| --keep B C C |
| .... |
| |
| `reset --merge` is meant to be used when resetting out of a conflicted |
| merge. Any mergy operation guarantees that the working tree file that is |
| involved in the merge does not have a local change with respect to the index |
| before it starts, and that it writes the result out to the working tree. So if |
| we see some difference between the index and the target and also |
| between the index and the working tree, then it means that we are not |
| resetting out from a state that a mergy operation left after failing |
| with a conflict. That is why we disallow `--merge` option in this case. |
| |
| `reset --keep` is meant to be used when removing some of the last |
| commits in the current branch while keeping changes in the working |
| tree. If there could be conflicts between the changes in the commit we |
| want to remove and the changes in the working tree we want to keep, |
| the reset is disallowed. That's why it is disallowed if there are both |
| changes between the working tree and `HEAD`, and between `HEAD` and the |
| target. To be safe, it is also disallowed when there are unmerged |
| entries. |
| |
| The following tables show what happens when there are unmerged |
| entries: |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| X U A B --soft (disallowed) |
| --mixed X B B |
| --hard B B B |
| --merge B B B |
| --keep (disallowed) |
| .... |
| |
| .... |
| working index HEAD target working index HEAD |
| ---------------------------------------------------- |
| X U A A --soft (disallowed) |
| --mixed X A A |
| --hard A A A |
| --merge A A A |
| --keep (disallowed) |
| .... |
| |
| `X` means any state and `U` means an unmerged index. |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |