Documentation/howto/setup-git-server-over-http.txt - jrn/git - Git at Google

 From: Rutger Nijlunsing <rutger@nospam.com>
 Subject: Setting up a Git repository which can be pushed into and pulled from over HTTP(S).
 Date: Thu, 10 Aug 2006 22:00:26 +0200
 Content-type: text/asciidoc

 How to setup Git server over http
 =================================

 NOTE: This document is from 2006.  A lot has happened since then, and this
 document is now relevant mainly if your web host is not CGI capable.
 Almost everyone else should instead look at linkgit:git-http-backend[1].

 Since Apache is one of those packages people like to compile
 themselves while others prefer the bureaucrat's dream Debian, it is
 impossible to give guidelines which will work for everyone. Just send
 some feedback to the mailing list at git@vger.kernel.org to get this
 document tailored to your favorite distro.


 What's needed:

 - Have an Apache web-server

   On Debian:
     $ apt-get install apache2
     To get apache2 by default started,
     edit /etc/default/apache2 and set NO_START=0

 - can edit the configuration of it.

   This could be found under /etc/httpd, or refer to your Apache documentation.

   On Debian: this means being able to edit files under /etc/apache2

 - can restart it.

   'apachectl --graceful' might do. If it doesn't, just stop and
   restart apache. Be warning that active connections to your server
   might be aborted by this.

   On Debian:
     $ /etc/init.d/apache2 restart
   or
     $ /etc/init.d/apache2 force-reload
     (which seems to do the same)
   This adds symlinks from the /etc/apache2/mods-enabled to
   /etc/apache2/mods-available.

 - have permissions to chown a directory

 - have Git installed on the client, and

 - either have Git installed on the server or have a webdav client on
   the client.

 In effect, this means you're going to be root, or that you're using a
 preconfigured WebDAV server.


 Step 1: setup a bare Git repository
 -----------------------------------

 At the time of writing, git-http-push cannot remotely create a Git
 repository. So we have to do that at the server side with Git. Another
 option is to generate an empty bare repository at the client and copy
 it to the server with a WebDAV client (which is the only option if Git
 is not installed on the server).

 Create the directory under the DocumentRoot of the directories served
 by Apache. As an example we take /usr/local/apache2, but try "grep
 DocumentRoot /where/ever/httpd.conf" to find your root:

     $ cd /usr/local/apache/htdocs
     $ mkdir my-new-repo.git

   On Debian:

     $ cd /var/www
     $ mkdir my-new-repo.git


 Initialize a bare repository

     $ cd my-new-repo.git
     $ git --bare init


 Change the ownership to your web-server's credentials. Use `"grep ^User
 httpd.conf"` and `"grep ^Group httpd.conf"` to find out:

     $ chown -R www.www .

   On Debian:

     $ chown -R www-data.www-data .


 If you do not know which user Apache runs as, you can alternatively do
 a "chmod -R a+w .", inspect the files which are created later on, and
 set the permissions appropriately.

 Restart apache2, and check whether http://server/my-new-repo.git gives
 a directory listing. If not, check whether apache started up
 successfully.


 Step 2: enable DAV on this repository
 -------------------------------------

 First make sure the dav_module is loaded. For this, insert in httpd.conf:

     LoadModule dav_module libexec/httpd/libdav.so
     AddModule mod_dav.c

 Also make sure that this line exists which is the file used for
 locking DAV operations:

   DAVLockDB "/usr/local/apache2/temp/DAV.lock"

   On Debian these steps can be performed with:

     Enable the dav and dav_fs modules of apache:
     $ a2enmod dav_fs
     (just to be sure. dav_fs might be unneeded, I don't know)
     $ a2enmod dav
     The DAV lock is located in /etc/apache2/mods-available/dav_fs.conf:
       DAVLockDB /var/lock/apache2/DAVLock

 Of course, it can point somewhere else, but the string is actually just a
 prefix in some Apache configurations, and therefore the _directory_ has to
 be writable by the user Apache runs as.

 Then, add something like this to your httpd.conf

   <Location /my-new-repo.git>
      DAV on
      AuthType Basic
      AuthName "Git"
      AuthUserFile /usr/local/apache2/conf/passwd.git
      Require valid-user
   </Location>

   On Debian:
     Create (or add to) /etc/apache2/conf.d/git.conf :

     <Location /my-new-repo.git>
        DAV on
        AuthType Basic
        AuthName "Git"
        AuthUserFile /etc/apache2/passwd.git
        Require valid-user
     </Location>

     Debian automatically reads all files under /etc/apache2/conf.d.

 The password file can be somewhere else, but it has to be readable by
 Apache and preferably not readable by the world.

 Create this file by
     $ htpasswd -c /usr/local/apache2/conf/passwd.git <user>

     On Debian:
       $ htpasswd -c /etc/apache2/passwd.git <user>

 You will be asked a password, and the file is created. Subsequent calls
 to htpasswd should omit the '-c' option, since you want to append to the
 existing file.

 You need to restart Apache.

 Now go to http://<username>@<servername>/my-new-repo.git in your
 browser to check whether it asks for a password and accepts the right
 password.

 On Debian:

    To test the WebDAV part, do:

    $ apt-get install litmus
    $ litmus http://<servername>/my-new-repo.git <username> <password>

    Most tests should pass.

 A command-line tool to test WebDAV is cadaver. If you prefer GUIs, for
 example, konqueror can open WebDAV URLs as "webdav://..." or
 "webdavs://...".

 If you're into Windows, from XP onwards Internet Explorer supports
 WebDAV. For this, do Internet Explorer -> Open Location ->
 http://<servername>/my-new-repo.git [x] Open as webfolder -> login .


 Step 3: setup the client
 ------------------------

 Make sure that you have HTTP support, i.e. your Git was built with
 libcurl (version more recent than 7.10). The command 'git http-push' with
 no argument should display a usage message.

 Then, add the following to your $HOME/.netrc (you can do without, but will be
 asked to input your password a _lot_ of times):

     machine <servername>
     login <username>
     password <password>

 ...and set permissions:
      chmod 600 ~/.netrc

 If you want to access the web-server by its IP, you have to type that in,
 instead of the server name.

 To check whether all is OK, do:

    curl --netrc --location -v http://<username>@<servername>/my-new-repo.git/HEAD

 ...this should give something like 'ref: refs/heads/master', which is
 the content of the file HEAD on the server.

 Now, add the remote in your existing repository which contains the project
 you want to export:

    $ git-config remote.upload.url \
        http://<username>@<servername>/my-new-repo.git/

 It is important to put the last '/'; Without it, the server will send
 a redirect which git-http-push does not (yet) understand, and git-http-push
 will repeat the request infinitely.


 Step 4: make the initial push
 -----------------------------

 From your client repository, do

    $ git push upload master

 This pushes branch 'master' (which is assumed to be the branch you
 want to export) to repository called 'upload', which we previously
 defined with git-config.


 Using a proxy:
 --------------

 If you have to access the WebDAV server from behind an HTTP(S) proxy,
 set the variable 'all_proxy' to 'http://proxy-host.com:port', or
 'http://login-on-proxy:passwd-on-proxy@proxy-host.com:port'. See 'man
 curl' for details.


 Troubleshooting:
 ----------------

 If git-http-push says

    Error: no DAV locking support on remote repo http://...

 then it means the web-server did not accept your authentication. Make sure
 that the user name and password matches in httpd.conf, .netrc and the URL
 you are uploading to.

 If git-http-push shows you an error (22/502) when trying to MOVE a blob,
 it means that your web-server somehow does not recognize its name in the
 request; This can happen when you start Apache, but then disable the
 network interface. A simple restart of Apache helps.

 Errors like (22/502) are of format (curl error code/http error
 code). So (22/404) means something like 'not found' at the server.

 Reading /usr/local/apache2/logs/error_log is often helpful.

   On Debian: Read /var/log/apache2/error.log instead.

 If you access HTTPS locations, Git may fail verifying the SSL
 certificate (this is return code 60). Setting http.sslVerify=false can
 help diagnosing the problem, but removes security checks.


 Debian References: http://www.debian-administration.org/articles/285

 Authors
   Johannes Schindelin <Johannes.Schindelin@gmx.de>
   Rutger Nijlunsing <git@wingding.demon.nl>
   Matthieu Moy <Matthieu.Moy@imag.fr>
	From: Rutger Nijlunsing <rutger@nospam.com>
	Subject: Setting up a Git repository which can be pushed into and pulled from over HTTP(S).
	Date: Thu, 10 Aug 2006 22:00:26 +0200
	Content-type: text/asciidoc

	How to setup Git server over http
	=================================

	NOTE: This document is from 2006. A lot has happened since then, and this
	document is now relevant mainly if your web host is not CGI capable.
	Almost everyone else should instead look at linkgit:git-http-backend[1].

	Since Apache is one of those packages people like to compile
	themselves while others prefer the bureaucrat's dream Debian, it is
	impossible to give guidelines which will work for everyone. Just send
	some feedback to the mailing list at git@vger.kernel.org to get this
	document tailored to your favorite distro.


	What's needed:

	- Have an Apache web-server

	On Debian:
	$ apt-get install apache2
	To get apache2 by default started,
	edit /etc/default/apache2 and set NO_START=0

	- can edit the configuration of it.

	This could be found under /etc/httpd, or refer to your Apache documentation.

	On Debian: this means being able to edit files under /etc/apache2

	- can restart it.

	'apachectl --graceful' might do. If it doesn't, just stop and
	restart apache. Be warning that active connections to your server
	might be aborted by this.

	On Debian:
	$ /etc/init.d/apache2 restart
	or
	$ /etc/init.d/apache2 force-reload
	(which seems to do the same)
	This adds symlinks from the /etc/apache2/mods-enabled to
	/etc/apache2/mods-available.

	- have permissions to chown a directory

	- have Git installed on the client, and

	- either have Git installed on the server or have a webdav client on
	the client.

	In effect, this means you're going to be root, or that you're using a
	preconfigured WebDAV server.


	Step 1: setup a bare Git repository
	-----------------------------------

	At the time of writing, git-http-push cannot remotely create a Git
	repository. So we have to do that at the server side with Git. Another
	option is to generate an empty bare repository at the client and copy
	it to the server with a WebDAV client (which is the only option if Git
	is not installed on the server).

	Create the directory under the DocumentRoot of the directories served
	by Apache. As an example we take /usr/local/apache2, but try "grep
	DocumentRoot /where/ever/httpd.conf" to find your root:

	$ cd /usr/local/apache/htdocs
	$ mkdir my-new-repo.git

	On Debian:

	$ cd /var/www
	$ mkdir my-new-repo.git


	Initialize a bare repository

	$ cd my-new-repo.git
	$ git --bare init


	Change the ownership to your web-server's credentials. Use `"grep ^User
	httpd.conf"` and `"grep ^Group httpd.conf"` to find out:

	$ chown -R www.www .

	On Debian:

	$ chown -R www-data.www-data .


	If you do not know which user Apache runs as, you can alternatively do
	a "chmod -R a+w .", inspect the files which are created later on, and
	set the permissions appropriately.

	Restart apache2, and check whether http://server/my-new-repo.git gives
	a directory listing. If not, check whether apache started up
	successfully.


	Step 2: enable DAV on this repository
	-------------------------------------

	First make sure the dav_module is loaded. For this, insert in httpd.conf:

	LoadModule dav_module libexec/httpd/libdav.so
	AddModule mod_dav.c

	Also make sure that this line exists which is the file used for
	locking DAV operations:

	DAVLockDB "/usr/local/apache2/temp/DAV.lock"

	On Debian these steps can be performed with:

	Enable the dav and dav_fs modules of apache:
	$ a2enmod dav_fs
	(just to be sure. dav_fs might be unneeded, I don't know)
	$ a2enmod dav
	The DAV lock is located in /etc/apache2/mods-available/dav_fs.conf:
	DAVLockDB /var/lock/apache2/DAVLock

	Of course, it can point somewhere else, but the string is actually just a
	prefix in some Apache configurations, and therefore the _directory_ has to
	be writable by the user Apache runs as.

	Then, add something like this to your httpd.conf

	<Location /my-new-repo.git>
	DAV on
	AuthType Basic
	AuthName "Git"
	AuthUserFile /usr/local/apache2/conf/passwd.git
	Require valid-user
	</Location>

	On Debian:
	Create (or add to) /etc/apache2/conf.d/git.conf :

	<Location /my-new-repo.git>
	DAV on
	AuthType Basic
	AuthName "Git"
	AuthUserFile /etc/apache2/passwd.git
	Require valid-user
	</Location>

	Debian automatically reads all files under /etc/apache2/conf.d.

	The password file can be somewhere else, but it has to be readable by
	Apache and preferably not readable by the world.

	Create this file by
	$ htpasswd -c /usr/local/apache2/conf/passwd.git <user>

	On Debian:
	$ htpasswd -c /etc/apache2/passwd.git <user>

	You will be asked a password, and the file is created. Subsequent calls
	to htpasswd should omit the '-c' option, since you want to append to the
	existing file.

	You need to restart Apache.

	Now go to http://<username>@<servername>/my-new-repo.git in your
	browser to check whether it asks for a password and accepts the right
	password.

	On Debian:

	To test the WebDAV part, do:

	$ apt-get install litmus
	$ litmus http://<servername>/my-new-repo.git <username> <password>

	Most tests should pass.

	A command-line tool to test WebDAV is cadaver. If you prefer GUIs, for
	example, konqueror can open WebDAV URLs as "webdav://..." or
	"webdavs://...".

	If you're into Windows, from XP onwards Internet Explorer supports
	WebDAV. For this, do Internet Explorer -> Open Location ->
	http://<servername>/my-new-repo.git [x] Open as webfolder -> login .


	Step 3: setup the client
	------------------------

	Make sure that you have HTTP support, i.e. your Git was built with
	libcurl (version more recent than 7.10). The command 'git http-push' with
	no argument should display a usage message.

	Then, add the following to your $HOME/.netrc (you can do without, but will be
	asked to input your password a _lot_ of times):

	machine <servername>
	login <username>
	password <password>

	...and set permissions:
	chmod 600 ~/.netrc

	If you want to access the web-server by its IP, you have to type that in,
	instead of the server name.

	To check whether all is OK, do:

	curl --netrc --location -v http://<username>@<servername>/my-new-repo.git/HEAD

	...this should give something like 'ref: refs/heads/master', which is
	the content of the file HEAD on the server.

	Now, add the remote in your existing repository which contains the project
	you want to export:

	$ git-config remote.upload.url \
	http://<username>@<servername>/my-new-repo.git/

	It is important to put the last '/'; Without it, the server will send
	a redirect which git-http-push does not (yet) understand, and git-http-push
	will repeat the request infinitely.


	Step 4: make the initial push
	-----------------------------

	From your client repository, do

	$ git push upload master

	This pushes branch 'master' (which is assumed to be the branch you
	want to export) to repository called 'upload', which we previously
	defined with git-config.


	Using a proxy:
	--------------

	If you have to access the WebDAV server from behind an HTTP(S) proxy,
	set the variable 'all_proxy' to 'http://proxy-host.com:port', or
	'http://login-on-proxy:passwd-on-proxy@proxy-host.com:port'. See 'man
	curl' for details.


	Troubleshooting:
	----------------

	If git-http-push says

	Error: no DAV locking support on remote repo http://...

	then it means the web-server did not accept your authentication. Make sure
	that the user name and password matches in httpd.conf, .netrc and the URL
	you are uploading to.

	If git-http-push shows you an error (22/502) when trying to MOVE a blob,
	it means that your web-server somehow does not recognize its name in the
	request; This can happen when you start Apache, but then disable the
	network interface. A simple restart of Apache helps.

	Errors like (22/502) are of format (curl error code/http error
	code). So (22/404) means something like 'not found' at the server.

	Reading /usr/local/apache2/logs/error_log is often helpful.

	On Debian: Read /var/log/apache2/error.log instead.

	If you access HTTPS locations, Git may fail verifying the SSL
	certificate (this is return code 60). Setting http.sslVerify=false can
	help diagnosing the problem, but removes security checks.


	Debian References: http://www.debian-administration.org/articles/285

	Authors
	Johannes Schindelin <Johannes.Schindelin@gmx.de>
	Rutger Nijlunsing <git@wingding.demon.nl>
	Matthieu Moy <Matthieu.Moy@imag.fr>