Documentation/git-commit.txt - jrn/git - Git at Google

 git-commit(1)
 =============

 NAME
 ----
 git-commit - Record changes to the repository

 SYNOPSIS
 --------
 [verse]
 'git commit' [-a | --interactive | --patch] [-s] [-v] [-u<mode>] [--amend]
 	   [--dry-run] [(-c | -C | --fixup | --squash) <commit>]
 	   [-F <file> | -m <msg>] [--reset-author] [--allow-empty]
 	   [--allow-empty-message] [--no-verify] [-e] [--author=<author>]
 	   [--date=<date>] [--cleanup=<mode>] [--status | --no-status]
 	   [-i | -o] [--] [<file>...]

 DESCRIPTION
 -----------
 Stores the current contents of the index in a new commit along
 with a log message from the user describing the changes.

 The content to be added can be specified in several ways:

 1. by using 'git add' to incrementally "add" changes to the
    index before using the 'commit' command (Note: even modified
    files must be "added");

 2. by using 'git rm' to remove files from the working tree
    and the index, again before using the 'commit' command;

 3. by listing files as arguments to the 'commit' command, in which
    case the commit will ignore changes staged in the index, and instead
    record the current content of the listed files (which must already
    be known to git);

 4. by using the -a switch with the 'commit' command to automatically
    "add" changes from all known files (i.e. all files that are already
    listed in the index) and to automatically "rm" files in the index
    that have been removed from the working tree, and then perform the
    actual commit;

 5. by using the --interactive or --patch switches with the 'commit' command
    to decide one by one which files or hunks should be part of the commit,
    before finalizing the operation. See the ``Interactive Mode'' section of
    linkgit:git-add[1] to learn how to operate these modes.

 The `--dry-run` option can be used to obtain a
 summary of what is included by any of the above for the next
 commit by giving the same set of parameters (options and paths).

 If you make a commit and then find a mistake immediately after
 that, you can recover from it with 'git reset'.


 OPTIONS
 -------
 -a::
 --all::
 	Tell the command to automatically stage files that have
 	been modified and deleted, but new files you have not
 	told git about are not affected.

 -p::
 --patch::
 	Use the interactive patch selection interface to chose
 	which changes to commit. See linkgit:git-add[1] for
 	details.

 -C <commit>::
 --reuse-message=<commit>::
 	Take an existing commit object, and reuse the log message
 	and the authorship information (including the timestamp)
 	when creating the commit.

 -c <commit>::
 --reedit-message=<commit>::
 	Like '-C', but with '-c' the editor is invoked, so that
 	the user can further edit the commit message.

 --fixup=<commit>::
 	Construct a commit message for use with `rebase --autosquash`.
 	The commit message will be the subject line from the specified
 	commit with a prefix of "fixup! ".  See linkgit:git-rebase[1]
 	for details.

 --squash=<commit>::
 	Construct a commit message for use with `rebase --autosquash`.
 	The commit message subject line is taken from the specified
 	commit with a prefix of "squash! ".  Can be used with additional
 	commit message options (`-m`/`-c`/`-C`/`-F`). See
 	linkgit:git-rebase[1] for details.

 --reset-author::
 	When used with -C/-c/--amend options, or when committing after a
 	a conflicting cherry-pick, declare that the authorship of the
 	resulting commit now belongs of the committer. This also renews
 	the author timestamp.

 --short::
 	When doing a dry-run, give the output in the short-format. See
 	linkgit:git-status[1] for details. Implies `--dry-run`.

 --branch::
 	Show the branch and tracking info even in short-format.

 --porcelain::
 	When doing a dry-run, give the output in a porcelain-ready
 	format. See linkgit:git-status[1] for details. Implies
 	`--dry-run`.

 -z::
 --null::
 	When showing `short` or `porcelain` status output, terminate
 	entries in the status output with NUL, instead of LF. If no
 	format is given, implies the `--porcelain` output format.

 -F <file>::
 --file=<file>::
 	Take the commit message from the given file.  Use '-' to
 	read the message from the standard input.

 --author=<author>::
 	Override the commit author. Specify an explicit author using the
 	standard `A U Thor <author@example.com>` format. Otherwise <author>
 	is assumed to be a pattern and is used to search for an existing
 	commit by that author (i.e. rev-list --all -i --author=<author>);
 	the commit author is then copied from the first such commit found.

 --date=<date>::
 	Override the author date used in the commit.

 -m <msg>::
 --message=<msg>::
 	Use the given <msg> as the commit message.

 -t <file>::
 --template=<file>::
 	When editing the commit message, start the editor with the
 	contents in the given file.  The `commit.template` configuration
 	variable is often used to give this option implicitly to the
 	command.  This mechanism can be used by projects that want to
 	guide participants with some hints on what to write in the message
 	in what order.  If the user exits the editor without editing the
 	message, the commit is aborted.  This has no effect when a message
 	is given by other means, e.g. with the `-m` or `-F` options.

 -s::
 --signoff::
 	Add Signed-off-by line by the committer at the end of the commit
 	log message.

 -n::
 --no-verify::
 	This option bypasses the pre-commit and commit-msg hooks.
 	See also linkgit:githooks[5].

 --allow-empty::
 	Usually recording a commit that has the exact same tree as its
 	sole parent commit is a mistake, and the command prevents you
 	from making such a commit.  This option bypasses the safety, and
 	is primarily for use by foreign SCM interface scripts.

 --allow-empty-message::
        Like --allow-empty this command is primarily for use by foreign
        SCM interface scripts. It allows you to create a commit with an
        empty commit message without using plumbing commands like
        linkgit:git-commit-tree[1].

 --cleanup=<mode>::
 	This option sets how the commit message is cleaned up.
 	The  '<mode>' can be one of 'verbatim', 'whitespace', 'strip',
 	and 'default'. The 'default' mode will strip leading and
 	trailing empty lines and #commentary from the commit message
 	only if the message is to be edited. Otherwise only whitespace
 	removed. The 'verbatim' mode does not change message at all,
 	'whitespace' removes just leading/trailing whitespace lines
 	and 'strip' removes both whitespace and commentary.

 -e::
 --edit::
 	The message taken from file with `-F`, command line with
 	`-m`, and from file with `-C` are usually used as the
 	commit log message unmodified.  This option lets you
 	further edit the message taken from these sources.

 --amend::
 	Used to amend the tip of the current branch. Prepare the tree
 	object you would want to replace the latest commit as usual
 	(this includes the usual -i/-o and explicit paths), and the
 	commit log editor is seeded with the commit message from the
 	tip of the current branch. The commit you create replaces the
 	current tip -- if it was a merge, it will have the parents of
 	the current tip as parents -- so the current top commit is
 	discarded.

 --no-post-rewrite::
 	Bypass the post-rewrite hook.

 +
 --
 It is a rough equivalent for:
 ------
 	$ git reset --soft HEAD^
 	$ ... do something else to come up with the right tree ...
 	$ git commit -c ORIG_HEAD

 ------
 but can be used to amend a merge commit.
 --
 +
 You should understand the implications of rewriting history if you
 amend a commit that has already been published.  (See the "RECOVERING
 FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].)

 -i::
 --include::
 	Before making a commit out of staged contents so far,
 	stage the contents of paths given on the command line
 	as well.  This is usually not what you want unless you
 	are concluding a conflicted merge.

 -o::
 --only::
 	Make a commit only from the paths specified on the
 	command line, disregarding any contents that have been
 	staged so far. This is the default mode of operation of
 	'git commit' if any paths are given on the command line,
 	in which case this option can be omitted.
 	If this option is specified together with '--amend', then
 	no paths need to be specified, which can be used to amend
 	the last commit without committing changes that have
 	already been staged.

 -u[<mode>]::
 --untracked-files[=<mode>]::
 	Show untracked files.
 +
 The mode parameter is optional (defaults to 'all'), and is used to
 specify the handling of untracked files; when -u is not used, the
 default is 'normal', i.e. show untracked files and directories.
 +
 The possible options are:
 +
 	- 'no'     - Show no untracked files
 	- 'normal' - Shows untracked files and directories
 	- 'all'    - Also shows individual files in untracked directories.
 +
 The default can be changed using the status.showUntrackedFiles
 configuration variable documented in linkgit:git-config[1].

 -v::
 --verbose::
 	Show unified diff between the HEAD commit and what
 	would be committed at the bottom of the commit message
 	template.  Note that this diff output doesn't have its
 	lines prefixed with '#'.

 -q::
 --quiet::
 	Suppress commit summary message.

 --dry-run::
 	Do not create a commit, but show a list of paths that are
 	to be committed, paths with local changes that will be left
 	uncommitted and paths that are untracked.

 --status::
 	Include the output of linkgit:git-status[1] in the commit
 	message template when using an editor to prepare the commit
 	message.  Defaults to on, but can be used to override
 	configuration variable commit.status.

 --no-status::
 	Do not include the output of linkgit:git-status[1] in the
 	commit message template when using an editor to prepare the
 	default commit message.

 \--::
 	Do not interpret any more arguments as options.

 <file>...::
 	When files are given on the command line, the command
 	commits the contents of the named files, without
 	recording the changes already staged.  The contents of
 	these files are also staged for the next commit on top
 	of what have been staged before.

 :git-commit: 1
 include::date-formats.txt[]

 EXAMPLES
 --------
 When recording your own work, the contents of modified files in
 your working tree are temporarily stored to a staging area
 called the "index" with 'git add'.  A file can be
 reverted back, only in the index but not in the working tree,
 to that of the last commit with `git reset HEAD -- <file>`,
 which effectively reverts 'git add' and prevents the changes to
 this file from participating in the next commit.  After building
 the state to be committed incrementally with these commands,
 `git commit` (without any pathname parameter) is used to record what
 has been staged so far.  This is the most basic form of the
 command.  An example:

 ------------
 $ edit hello.c
 $ git rm goodbye.c
 $ git add hello.c
 $ git commit
 ------------

 Instead of staging files after each individual change, you can
 tell `git commit` to notice the changes to the files whose
 contents are tracked in
 your working tree and do corresponding `git add` and `git rm`
 for you.  That is, this example does the same as the earlier
 example if there is no other change in your working tree:

 ------------
 $ edit hello.c
 $ rm goodbye.c
 $ git commit -a
 ------------

 The command `git commit -a` first looks at your working tree,
 notices that you have modified hello.c and removed goodbye.c,
 and performs necessary `git add` and `git rm` for you.

 After staging changes to many files, you can alter the order the
 changes are recorded in, by giving pathnames to `git commit`.
 When pathnames are given, the command makes a commit that
 only records the changes made to the named paths:

 ------------
 $ edit hello.c hello.h
 $ git add hello.c hello.h
 $ edit Makefile
 $ git commit Makefile
 ------------

 This makes a commit that records the modification to `Makefile`.
 The changes staged for `hello.c` and `hello.h` are not included
 in the resulting commit.  However, their changes are not lost --
 they are still staged and merely held back.  After the above
 sequence, if you do:

 ------------
 $ git commit
 ------------

 this second commit would record the changes to `hello.c` and
 `hello.h` as expected.

 After a merge (initiated by 'git merge' or 'git pull') stops
 because of conflicts, cleanly merged
 paths are already staged to be committed for you, and paths that
 conflicted are left in unmerged state.  You would have to first
 check which paths are conflicting with 'git status'
 and after fixing them manually in your working tree, you would
 stage the result as usual with 'git add':

 ------------
 $ git status | grep unmerged
 unmerged: hello.c
 $ edit hello.c
 $ git add hello.c
 ------------

 After resolving conflicts and staging the result, `git ls-files -u`
 would stop mentioning the conflicted path.  When you are done,
 run `git commit` to finally record the merge:

 ------------
 $ git commit
 ------------

 As with the case to record your own changes, you can use `-a`
 option to save typing.  One difference is that during a merge
 resolution, you cannot use `git commit` with pathnames to
 alter the order the changes are committed, because the merge
 should be recorded as a single commit.  In fact, the command
 refuses to run when given pathnames (but see `-i` option).


 DISCUSSION
 ----------

 Though not required, it's a good idea to begin the commit message
 with a single short (less than 50 character) line summarizing the
 change, followed by a blank line and then a more thorough description.
 The text up to the first blank line in a commit message is treated
 as the commit title, and that title is used throughout git.
 For example, linkgit:git-format-patch[1] turns a commit into email, and it uses
 the title on the Subject line and the rest of the commit in the body.

 include::i18n.txt[]

 ENVIRONMENT AND CONFIGURATION VARIABLES
 ---------------------------------------
 The editor used to edit the commit log message will be chosen from the
 GIT_EDITOR environment variable, the core.editor configuration variable, the
 VISUAL environment variable, or the EDITOR environment variable (in that
 order).  See linkgit:git-var[1] for details.

 HOOKS
 -----
 This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`,
 and `post-commit` hooks.  See linkgit:githooks[5] for more
 information.

 FILES
 -----

 `$GIT_DIR/COMMIT_EDITMSG`::
 	This file contains the commit message of a commit in progress.
 	If `git commit` exits due to an error before creating a commit,
 	any commit message that has been provided by the user (e.g., in
 	an editor session) will be available in this file, but will be
 	overwritten by the next invocation of `git commit`.

 SEE ALSO
 --------
 linkgit:git-add[1],
 linkgit:git-rm[1],
 linkgit:git-mv[1],
 linkgit:git-merge[1],
 linkgit:git-commit-tree[1]

 GIT
 ---
 Part of the linkgit:git[1] suite
	git-commit(1)
	=============

	NAME
	----
	git-commit - Record changes to the repository

	SYNOPSIS
	--------
	[verse]
	'git commit' [-a \| --interactive \| --patch] [-s] [-v] [-u<mode>] [--amend]
	[--dry-run] [(-c \| -C \| --fixup \| --squash) <commit>]
	[-F <file> \| -m <msg>] [--reset-author] [--allow-empty]
	[--allow-empty-message] [--no-verify] [-e] [--author=<author>]
	[--date=<date>] [--cleanup=<mode>] [--status \| --no-status]
	[-i \| -o] [--] [<file>...]

	DESCRIPTION
	-----------
	Stores the current contents of the index in a new commit along
	with a log message from the user describing the changes.

	The content to be added can be specified in several ways:

	1. by using 'git add' to incrementally "add" changes to the
	index before using the 'commit' command (Note: even modified
	files must be "added");

	2. by using 'git rm' to remove files from the working tree
	and the index, again before using the 'commit' command;

	3. by listing files as arguments to the 'commit' command, in which
	case the commit will ignore changes staged in the index, and instead
	record the current content of the listed files (which must already
	be known to git);

	4. by using the -a switch with the 'commit' command to automatically
	"add" changes from all known files (i.e. all files that are already
	listed in the index) and to automatically "rm" files in the index
	that have been removed from the working tree, and then perform the
	actual commit;

	5. by using the --interactive or --patch switches with the 'commit' command
	to decide one by one which files or hunks should be part of the commit,
	before finalizing the operation. See the ``Interactive Mode'' section of
	linkgit:git-add[1] to learn how to operate these modes.

	The `--dry-run` option can be used to obtain a
	summary of what is included by any of the above for the next
	commit by giving the same set of parameters (options and paths).

	If you make a commit and then find a mistake immediately after
	that, you can recover from it with 'git reset'.


	OPTIONS
	-------
	-a::
	--all::
	Tell the command to automatically stage files that have
	been modified and deleted, but new files you have not
	told git about are not affected.

	-p::
	--patch::
	Use the interactive patch selection interface to chose
	which changes to commit. See linkgit:git-add[1] for
	details.

	-C <commit>::
	--reuse-message=<commit>::
	Take an existing commit object, and reuse the log message
	and the authorship information (including the timestamp)
	when creating the commit.

	-c <commit>::
	--reedit-message=<commit>::
	Like '-C', but with '-c' the editor is invoked, so that
	the user can further edit the commit message.

	--fixup=<commit>::
	Construct a commit message for use with `rebase --autosquash`.
	The commit message will be the subject line from the specified
	commit with a prefix of "fixup! ". See linkgit:git-rebase[1]
	for details.

	--squash=<commit>::
	Construct a commit message for use with `rebase --autosquash`.
	The commit message subject line is taken from the specified
	commit with a prefix of "squash! ". Can be used with additional
	commit message options (`-m`/`-c`/`-C`/`-F`). See
	linkgit:git-rebase[1] for details.

	--reset-author::
	When used with -C/-c/--amend options, or when committing after a
	a conflicting cherry-pick, declare that the authorship of the
	resulting commit now belongs of the committer. This also renews
	the author timestamp.

	--short::
	When doing a dry-run, give the output in the short-format. See
	linkgit:git-status[1] for details. Implies `--dry-run`.

	--branch::
	Show the branch and tracking info even in short-format.

	--porcelain::
	When doing a dry-run, give the output in a porcelain-ready
	format. See linkgit:git-status[1] for details. Implies
	`--dry-run`.

	-z::
	--null::
	When showing `short` or `porcelain` status output, terminate
	entries in the status output with NUL, instead of LF. If no
	format is given, implies the `--porcelain` output format.

	-F <file>::
	--file=<file>::
	Take the commit message from the given file. Use '-' to
	read the message from the standard input.

	--author=<author>::
	Override the commit author. Specify an explicit author using the
	standard `A U Thor <author@example.com>` format. Otherwise <author>
	is assumed to be a pattern and is used to search for an existing
	commit by that author (i.e. rev-list --all -i --author=<author>);
	the commit author is then copied from the first such commit found.

	--date=<date>::
	Override the author date used in the commit.

	-m <msg>::
	--message=<msg>::
	Use the given <msg> as the commit message.

	-t <file>::
	--template=<file>::
	When editing the commit message, start the editor with the
	contents in the given file. The `commit.template` configuration
	variable is often used to give this option implicitly to the
	command. This mechanism can be used by projects that want to
	guide participants with some hints on what to write in the message
	in what order. If the user exits the editor without editing the
	message, the commit is aborted. This has no effect when a message
	is given by other means, e.g. with the `-m` or `-F` options.

	-s::
	--signoff::
	Add Signed-off-by line by the committer at the end of the commit
	log message.

	-n::
	--no-verify::
	This option bypasses the pre-commit and commit-msg hooks.
	See also linkgit:githooks[5].

	--allow-empty::
	Usually recording a commit that has the exact same tree as its
	sole parent commit is a mistake, and the command prevents you
	from making such a commit. This option bypasses the safety, and
	is primarily for use by foreign SCM interface scripts.

	--allow-empty-message::
	Like --allow-empty this command is primarily for use by foreign
	SCM interface scripts. It allows you to create a commit with an
	empty commit message without using plumbing commands like
	linkgit:git-commit-tree[1].

	--cleanup=<mode>::
	This option sets how the commit message is cleaned up.
	The '<mode>' can be one of 'verbatim', 'whitespace', 'strip',
	and 'default'. The 'default' mode will strip leading and
	trailing empty lines and #commentary from the commit message
	only if the message is to be edited. Otherwise only whitespace
	removed. The 'verbatim' mode does not change message at all,
	'whitespace' removes just leading/trailing whitespace lines
	and 'strip' removes both whitespace and commentary.

	-e::
	--edit::
	The message taken from file with `-F`, command line with
	`-m`, and from file with `-C` are usually used as the
	commit log message unmodified. This option lets you
	further edit the message taken from these sources.

	--amend::
	Used to amend the tip of the current branch. Prepare the tree
	object you would want to replace the latest commit as usual
	(this includes the usual -i/-o and explicit paths), and the
	commit log editor is seeded with the commit message from the
	tip of the current branch. The commit you create replaces the
	current tip -- if it was a merge, it will have the parents of
	the current tip as parents -- so the current top commit is
	discarded.

	--no-post-rewrite::
	Bypass the post-rewrite hook.

	+
	--
	It is a rough equivalent for:
	------
	$ git reset --soft HEAD^
	$ ... do something else to come up with the right tree ...
	$ git commit -c ORIG_HEAD

	------
	but can be used to amend a merge commit.
	--
	+
	You should understand the implications of rewriting history if you
	amend a commit that has already been published. (See the "RECOVERING
	FROM UPSTREAM REBASE" section in linkgit:git-rebase[1].)

	-i::
	--include::
	Before making a commit out of staged contents so far,
	stage the contents of paths given on the command line
	as well. This is usually not what you want unless you
	are concluding a conflicted merge.

	-o::
	--only::
	Make a commit only from the paths specified on the
	command line, disregarding any contents that have been
	staged so far. This is the default mode of operation of
	'git commit' if any paths are given on the command line,
	in which case this option can be omitted.
	If this option is specified together with '--amend', then
	no paths need to be specified, which can be used to amend
	the last commit without committing changes that have
	already been staged.

	-u[<mode>]::
	--untracked-files[=<mode>]::
	Show untracked files.
	+
	The mode parameter is optional (defaults to 'all'), and is used to
	specify the handling of untracked files; when -u is not used, the
	default is 'normal', i.e. show untracked files and directories.
	+
	The possible options are:
	+
	- 'no' - Show no untracked files
	- 'normal' - Shows untracked files and directories
	- 'all' - Also shows individual files in untracked directories.
	+
	The default can be changed using the status.showUntrackedFiles
	configuration variable documented in linkgit:git-config[1].

	-v::
	--verbose::
	Show unified diff between the HEAD commit and what
	would be committed at the bottom of the commit message
	template. Note that this diff output doesn't have its
	lines prefixed with '#'.

	-q::
	--quiet::
	Suppress commit summary message.

	--dry-run::
	Do not create a commit, but show a list of paths that are
	to be committed, paths with local changes that will be left
	uncommitted and paths that are untracked.

	--status::
	Include the output of linkgit:git-status[1] in the commit
	message template when using an editor to prepare the commit
	message. Defaults to on, but can be used to override
	configuration variable commit.status.

	--no-status::
	Do not include the output of linkgit:git-status[1] in the
	commit message template when using an editor to prepare the
	default commit message.

	\--::
	Do not interpret any more arguments as options.

	<file>...::
	When files are given on the command line, the command
	commits the contents of the named files, without
	recording the changes already staged. The contents of
	these files are also staged for the next commit on top
	of what have been staged before.

	:git-commit: 1
	include::date-formats.txt[]

	EXAMPLES
	--------
	When recording your own work, the contents of modified files in
	your working tree are temporarily stored to a staging area
	called the "index" with 'git add'. A file can be
	reverted back, only in the index but not in the working tree,
	to that of the last commit with `git reset HEAD -- <file>`,
	which effectively reverts 'git add' and prevents the changes to
	this file from participating in the next commit. After building
	the state to be committed incrementally with these commands,
	`git commit` (without any pathname parameter) is used to record what
	has been staged so far. This is the most basic form of the
	command. An example:

	------------
	$ edit hello.c
	$ git rm goodbye.c
	$ git add hello.c
	$ git commit
	------------

	Instead of staging files after each individual change, you can
	tell `git commit` to notice the changes to the files whose
	contents are tracked in
	your working tree and do corresponding `git add` and `git rm`
	for you. That is, this example does the same as the earlier
	example if there is no other change in your working tree:

	------------
	$ edit hello.c
	$ rm goodbye.c
	$ git commit -a
	------------

	The command `git commit -a` first looks at your working tree,
	notices that you have modified hello.c and removed goodbye.c,
	and performs necessary `git add` and `git rm` for you.

	After staging changes to many files, you can alter the order the
	changes are recorded in, by giving pathnames to `git commit`.
	When pathnames are given, the command makes a commit that
	only records the changes made to the named paths:

	------------
	$ edit hello.c hello.h
	$ git add hello.c hello.h
	$ edit Makefile
	$ git commit Makefile
	------------

	This makes a commit that records the modification to `Makefile`.
	The changes staged for `hello.c` and `hello.h` are not included
	in the resulting commit. However, their changes are not lost --
	they are still staged and merely held back. After the above
	sequence, if you do:

	------------
	$ git commit
	------------

	this second commit would record the changes to `hello.c` and
	`hello.h` as expected.

	After a merge (initiated by 'git merge' or 'git pull') stops
	because of conflicts, cleanly merged
	paths are already staged to be committed for you, and paths that
	conflicted are left in unmerged state. You would have to first
	check which paths are conflicting with 'git status'
	and after fixing them manually in your working tree, you would
	stage the result as usual with 'git add':

	------------
	$ git status \| grep unmerged
	unmerged: hello.c
	$ edit hello.c
	$ git add hello.c
	------------

	After resolving conflicts and staging the result, `git ls-files -u`
	would stop mentioning the conflicted path. When you are done,
	run `git commit` to finally record the merge:

	------------
	$ git commit
	------------

	As with the case to record your own changes, you can use `-a`
	option to save typing. One difference is that during a merge
	resolution, you cannot use `git commit` with pathnames to
	alter the order the changes are committed, because the merge
	should be recorded as a single commit. In fact, the command
	refuses to run when given pathnames (but see `-i` option).


	DISCUSSION
	----------

	Though not required, it's a good idea to begin the commit message
	with a single short (less than 50 character) line summarizing the
	change, followed by a blank line and then a more thorough description.
	The text up to the first blank line in a commit message is treated
	as the commit title, and that title is used throughout git.
	For example, linkgit:git-format-patch[1] turns a commit into email, and it uses
	the title on the Subject line and the rest of the commit in the body.

	include::i18n.txt[]

	ENVIRONMENT AND CONFIGURATION VARIABLES
	---------------------------------------
	The editor used to edit the commit log message will be chosen from the
	GIT_EDITOR environment variable, the core.editor configuration variable, the
	VISUAL environment variable, or the EDITOR environment variable (in that
	order). See linkgit:git-var[1] for details.

	HOOKS
	-----
	This command can run `commit-msg`, `prepare-commit-msg`, `pre-commit`,
	and `post-commit` hooks. See linkgit:githooks[5] for more
	information.

	FILES
	-----

	`$GIT_DIR/COMMIT_EDITMSG`::
	This file contains the commit message of a commit in progress.
	If `git commit` exits due to an error before creating a commit,
	any commit message that has been provided by the user (e.g., in
	an editor session) will be available in this file, but will be
	overwritten by the next invocation of `git commit`.

	SEE ALSO
	--------
	linkgit:git-add[1],
	linkgit:git-rm[1],
	linkgit:git-mv[1],
	linkgit:git-merge[1],
	linkgit:git-commit-tree[1]

	GIT
	---
	Part of the linkgit:git[1] suite