| /* |
| * "Ostensibly Recursive's Twin" merge strategy, or "ort" for short. Meant |
| * as a drop-in replacement for the "recursive" merge strategy, allowing one |
| * to replace |
| * |
| * git merge [-s recursive] |
| * |
| * with |
| * |
| * git merge -s ort |
| * |
| * Note: git's parser allows the space between '-s' and its argument to be |
| * missing. (Should I have backronymed "ham", "alsa", "kip", "nap, "alvo", |
| * "cale", "peedy", or "ins" instead of "ort"?) |
| */ |
| |
| #include "cache.h" |
| #include "merge-ort.h" |
| |
| #include "alloc.h" |
| #include "attr.h" |
| #include "blob.h" |
| #include "cache-tree.h" |
| #include "commit.h" |
| #include "commit-reach.h" |
| #include "diff.h" |
| #include "diffcore.h" |
| #include "dir.h" |
| #include "entry.h" |
| #include "ll-merge.h" |
| #include "object-store.h" |
| #include "promisor-remote.h" |
| #include "revision.h" |
| #include "strmap.h" |
| #include "submodule-config.h" |
| #include "submodule.h" |
| #include "tree.h" |
| #include "unpack-trees.h" |
| #include "xdiff-interface.h" |
| |
| /* |
| * We have many arrays of size 3. Whenever we have such an array, the |
| * indices refer to one of the sides of the three-way merge. This is so |
| * pervasive that the constants 0, 1, and 2 are used in many places in the |
| * code (especially in arithmetic operations to find the other side's index |
| * or to compute a relevant mask), but sometimes these enum names are used |
| * to aid code clarity. |
| * |
| * See also 'filemask' and 'dirmask' in struct conflict_info; the "ith side" |
| * referred to there is one of these three sides. |
| */ |
| enum merge_side { |
| MERGE_BASE = 0, |
| MERGE_SIDE1 = 1, |
| MERGE_SIDE2 = 2 |
| }; |
| |
| static unsigned RESULT_INITIALIZED = 0x1abe11ed; /* unlikely accidental value */ |
| |
| struct traversal_callback_data { |
| unsigned long mask; |
| unsigned long dirmask; |
| struct name_entry names[3]; |
| }; |
| |
| struct deferred_traversal_data { |
| /* |
| * possible_trivial_merges: directories to be explored only when needed |
| * |
| * possible_trivial_merges is a map of directory names to |
| * dir_rename_mask. When we detect that a directory is unchanged on |
| * one side, we can sometimes resolve the directory without recursing |
| * into it. Renames are the only things that can prevent such an |
| * optimization. However, for rename sources: |
| * - If no parent directory needed directory rename detection, then |
| * no path under such a directory can be a relevant_source. |
| * and for rename destinations: |
| * - If no cached rename has a target path under the directory AND |
| * - If there are no unpaired relevant_sources elsewhere in the |
| * repository |
| * then we don't need any path under this directory for a rename |
| * destination. The only way to know the last item above is to defer |
| * handling such directories until the end of collect_merge_info(), |
| * in handle_deferred_entries(). |
| * |
| * For each we store dir_rename_mask, since that's the only bit of |
| * information we need, other than the path, to resume the recursive |
| * traversal. |
| */ |
| struct strintmap possible_trivial_merges; |
| |
| /* |
| * trivial_merges_okay: if trivial directory merges are okay |
| * |
| * See possible_trivial_merges above. The "no unpaired |
| * relevant_sources elsewhere in the repository" is a single boolean |
| * per merge side, which we store here. Note that while 0 means no, |
| * 1 only means "maybe" rather than "yes"; we optimistically set it |
| * to 1 initially and only clear when we determine it is unsafe to |
| * do trivial directory merges. |
| */ |
| unsigned trivial_merges_okay; |
| |
| /* |
| * target_dirs: ancestor directories of rename targets |
| * |
| * target_dirs contains all directory names that are an ancestor of |
| * any rename destination. |
| */ |
| struct strset target_dirs; |
| }; |
| |
| struct rename_info { |
| /* |
| * All variables that are arrays of size 3 correspond to data tracked |
| * for the sides in enum merge_side. Index 0 is almost always unused |
| * because we often only need to track information for MERGE_SIDE1 and |
| * MERGE_SIDE2 (MERGE_BASE can't have rename information since renames |
| * are determined relative to what changed since the MERGE_BASE). |
| */ |
| |
| /* |
| * pairs: pairing of filenames from diffcore_rename() |
| */ |
| struct diff_queue_struct pairs[3]; |
| |
| /* |
| * dirs_removed: directories removed on a given side of history. |
| * |
| * The keys of dirs_removed[side] are the directories that were removed |
| * on the given side of history. The value of the strintmap for each |
| * directory is a value from enum dir_rename_relevance. |
| */ |
| struct strintmap dirs_removed[3]; |
| |
| /* |
| * dir_rename_count: tracking where parts of a directory were renamed to |
| * |
| * When files in a directory are renamed, they may not all go to the |
| * same location. Each strmap here tracks: |
| * old_dir => {new_dir => int} |
| * That is, dir_rename_count[side] is a strmap to a strintmap. |
| */ |
| struct strmap dir_rename_count[3]; |
| |
| /* |
| * dir_renames: computed directory renames |
| * |
| * This is a map of old_dir => new_dir and is derived in part from |
| * dir_rename_count. |
| */ |
| struct strmap dir_renames[3]; |
| |
| /* |
| * relevant_sources: deleted paths wanted in rename detection, and why |
| * |
| * relevant_sources is a set of deleted paths on each side of |
| * history for which we need rename detection. If a path is deleted |
| * on one side of history, we need to detect if it is part of a |
| * rename if either |
| * * the file is modified/deleted on the other side of history |
| * * we need to detect renames for an ancestor directory |
| * If neither of those are true, we can skip rename detection for |
| * that path. The reason is stored as a value from enum |
| * file_rename_relevance, as the reason can inform the algorithm in |
| * diffcore_rename_extended(). |
| */ |
| struct strintmap relevant_sources[3]; |
| |
| struct deferred_traversal_data deferred[3]; |
| |
| /* |
| * dir_rename_mask: |
| * 0: optimization removing unmodified potential rename source okay |
| * 2 or 4: optimization okay, but must check for files added to dir |
| * 7: optimization forbidden; need rename source in case of dir rename |
| */ |
| unsigned dir_rename_mask:3; |
| |
| /* |
| * callback_data_*: supporting data structures for alternate traversal |
| * |
| * We sometimes need to be able to traverse through all the files |
| * in a given tree before all immediate subdirectories within that |
| * tree. Since traverse_trees() doesn't do that naturally, we have |
| * a traverse_trees_wrapper() that stores any immediate |
| * subdirectories while traversing files, then traverses the |
| * immediate subdirectories later. These callback_data* variables |
| * store the information for the subdirectories so that we can do |
| * that traversal order. |
| */ |
| struct traversal_callback_data *callback_data; |
| int callback_data_nr, callback_data_alloc; |
| char *callback_data_traverse_path; |
| |
| /* |
| * merge_trees: trees passed to the merge algorithm for the merge |
| * |
| * merge_trees records the trees passed to the merge algorithm. But, |
| * this data also is stored in merge_result->priv. If a sequence of |
| * merges are being done (such as when cherry-picking or rebasing), |
| * the next merge can look at this and re-use information from |
| * previous merges under certain circumstances. |
| * |
| * See also all the cached_* variables. |
| */ |
| struct tree *merge_trees[3]; |
| |
| /* |
| * cached_pairs_valid_side: which side's cached info can be reused |
| * |
| * See the description for merge_trees. For repeated merges, at most |
| * only one side's cached information can be used. Valid values: |
| * MERGE_SIDE2: cached data from side2 can be reused |
| * MERGE_SIDE1: cached data from side1 can be reused |
| * 0: no cached data can be reused |
| * -1: See redo_after_renames; both sides can be reused. |
| */ |
| int cached_pairs_valid_side; |
| |
| /* |
| * cached_pairs: Caching of renames and deletions. |
| * |
| * These are mappings recording renames and deletions of individual |
| * files (not directories). They are thus a map from an old |
| * filename to either NULL (for deletions) or a new filename (for |
| * renames). |
| */ |
| struct strmap cached_pairs[3]; |
| |
| /* |
| * cached_target_names: just the destinations from cached_pairs |
| * |
| * We sometimes want a fast lookup to determine if a given filename |
| * is one of the destinations in cached_pairs. cached_target_names |
| * is thus duplicative information, but it provides a fast lookup. |
| */ |
| struct strset cached_target_names[3]; |
| |
| /* |
| * cached_irrelevant: Caching of rename_sources that aren't relevant. |
| * |
| * If we try to detect a rename for a source path and succeed, it's |
| * part of a rename. If we try to detect a rename for a source path |
| * and fail, then it's a delete. If we do not try to detect a rename |
| * for a path, then we don't know if it's a rename or a delete. If |
| * merge-ort doesn't think the path is relevant, then we just won't |
| * cache anything for that path. But there's a slight problem in |
| * that merge-ort can think a path is RELEVANT_LOCATION, but due to |
| * commit 9bd342137e ("diffcore-rename: determine which |
| * relevant_sources are no longer relevant", 2021-03-13), |
| * diffcore-rename can downgrade the path to RELEVANT_NO_MORE. To |
| * avoid excessive calls to diffcore_rename_extended() we still need |
| * to cache such paths, though we cannot record them as either |
| * renames or deletes. So we cache them here as a "turned out to be |
| * irrelevant *for this commit*" as they are often also irrelevant |
| * for subsequent commits, though we will have to do some extra |
| * checking to see whether such paths become relevant for rename |
| * detection when cherry-picking/rebasing subsequent commits. |
| */ |
| struct strset cached_irrelevant[3]; |
| |
| /* |
| * redo_after_renames: optimization flag for "restarting" the merge |
| * |
| * Sometimes it pays to detect renames, cache them, and then |
| * restart the merge operation from the beginning. The reason for |
| * this is that when we know where all the renames are, we know |
| * whether a certain directory has any paths under it affected -- |
| * and if a directory is not affected then it permits us to do |
| * trivial tree merging in more cases. Doing trivial tree merging |
| * prevents the need to run process_entry() on every path |
| * underneath trees that can be trivially merged, and |
| * process_entry() is more expensive than collect_merge_info() -- |
| * plus, the second collect_merge_info() will be much faster since |
| * it doesn't have to recurse into the relevant trees. |
| * |
| * Values for this flag: |
| * 0 = don't bother, not worth it (or conditions not yet checked) |
| * 1 = conditions for optimization met, optimization worthwhile |
| * 2 = we already did it (don't restart merge yet again) |
| */ |
| unsigned redo_after_renames; |
| |
| /* |
| * needed_limit: value needed for inexact rename detection to run |
| * |
| * If the current rename limit wasn't high enough for inexact |
| * rename detection to run, this records the limit needed. Otherwise, |
| * this value remains 0. |
| */ |
| int needed_limit; |
| }; |
| |
| struct merge_options_internal { |
| /* |
| * paths: primary data structure in all of merge ort. |
| * |
| * The keys of paths: |
| * * are full relative paths from the toplevel of the repository |
| * (e.g. "drivers/firmware/raspberrypi.c"). |
| * * store all relevant paths in the repo, both directories and |
| * files (e.g. drivers, drivers/firmware would also be included) |
| * * these keys serve to intern all the path strings, which allows |
| * us to do pointer comparison on directory names instead of |
| * strcmp; we just have to be careful to use the interned strings. |
| * |
| * The values of paths: |
| * * either a pointer to a merged_info, or a conflict_info struct |
| * * merged_info contains all relevant information for a |
| * non-conflicted entry. |
| * * conflict_info contains a merged_info, plus any additional |
| * information about a conflict such as the higher orders stages |
| * involved and the names of the paths those came from (handy |
| * once renames get involved). |
| * * a path may start "conflicted" (i.e. point to a conflict_info) |
| * and then a later step (e.g. three-way content merge) determines |
| * it can be cleanly merged, at which point it'll be marked clean |
| * and the algorithm will ignore any data outside the contained |
| * merged_info for that entry |
| * * If an entry remains conflicted, the merged_info portion of a |
| * conflict_info will later be filled with whatever version of |
| * the file should be placed in the working directory (e.g. an |
| * as-merged-as-possible variation that contains conflict markers). |
| */ |
| struct strmap paths; |
| |
| /* |
| * conflicted: a subset of keys->values from "paths" |
| * |
| * conflicted is basically an optimization between process_entries() |
| * and record_conflicted_index_entries(); the latter could loop over |
| * ALL the entries in paths AGAIN and look for the ones that are |
| * still conflicted, but since process_entries() has to loop over |
| * all of them, it saves the ones it couldn't resolve in this strmap |
| * so that record_conflicted_index_entries() can iterate just the |
| * relevant entries. |
| */ |
| struct strmap conflicted; |
| |
| /* |
| * pool: memory pool for fast allocation/deallocation |
| * |
| * We allocate room for lots of filenames and auxiliary data |
| * structures in merge_options_internal, and it tends to all be |
| * freed together too. Using a memory pool for these provides a |
| * nice speedup. |
| */ |
| struct mem_pool pool; |
| |
| /* |
| * output: special messages and conflict notices for various paths |
| * |
| * This is a map of pathnames (a subset of the keys in "paths" above) |
| * to strbufs. It gathers various warning/conflict/notice messages |
| * for later processing. |
| */ |
| struct strmap output; |
| |
| /* |
| * renames: various data relating to rename detection |
| */ |
| struct rename_info renames; |
| |
| /* |
| * attr_index: hacky minimal index used for renormalization |
| * |
| * renormalization code _requires_ an index, though it only needs to |
| * find a .gitattributes file within the index. So, when |
| * renormalization is important, we create a special index with just |
| * that one file. |
| */ |
| struct index_state attr_index; |
| |
| /* |
| * current_dir_name, toplevel_dir: temporary vars |
| * |
| * These are used in collect_merge_info_callback(), and will set the |
| * various merged_info.directory_name for the various paths we get; |
| * see documentation for that variable and the requirements placed on |
| * that field. |
| */ |
| const char *current_dir_name; |
| const char *toplevel_dir; |
| |
| /* call_depth: recursion level counter for merging merge bases */ |
| int call_depth; |
| }; |
| |
| struct version_info { |
| struct object_id oid; |
| unsigned short mode; |
| }; |
| |
| struct merged_info { |
| /* if is_null, ignore result. otherwise result has oid & mode */ |
| struct version_info result; |
| unsigned is_null:1; |
| |
| /* |
| * clean: whether the path in question is cleanly merged. |
| * |
| * see conflict_info.merged for more details. |
| */ |
| unsigned clean:1; |
| |
| /* |
| * basename_offset: offset of basename of path. |
| * |
| * perf optimization to avoid recomputing offset of final '/' |
| * character in pathname (0 if no '/' in pathname). |
| */ |
| size_t basename_offset; |
| |
| /* |
| * directory_name: containing directory name. |
| * |
| * Note that we assume directory_name is constructed such that |
| * strcmp(dir1_name, dir2_name) == 0 iff dir1_name == dir2_name, |
| * i.e. string equality is equivalent to pointer equality. For this |
| * to hold, we have to be careful setting directory_name. |
| */ |
| const char *directory_name; |
| }; |
| |
| struct conflict_info { |
| /* |
| * merged: the version of the path that will be written to working tree |
| * |
| * WARNING: It is critical to check merged.clean and ensure it is 0 |
| * before reading any conflict_info fields outside of merged. |
| * Allocated merge_info structs will always have clean set to 1. |
| * Allocated conflict_info structs will have merged.clean set to 0 |
| * initially. The merged.clean field is how we know if it is safe |
| * to access other parts of conflict_info besides merged; if a |
| * conflict_info's merged.clean is changed to 1, the rest of the |
| * algorithm is not allowed to look at anything outside of the |
| * merged member anymore. |
| */ |
| struct merged_info merged; |
| |
| /* oids & modes from each of the three trees for this path */ |
| struct version_info stages[3]; |
| |
| /* pathnames for each stage; may differ due to rename detection */ |
| const char *pathnames[3]; |
| |
| /* Whether this path is/was involved in a directory/file conflict */ |
| unsigned df_conflict:1; |
| |
| /* |
| * Whether this path is/was involved in a non-content conflict other |
| * than a directory/file conflict (e.g. rename/rename, rename/delete, |
| * file location based on possible directory rename). |
| */ |
| unsigned path_conflict:1; |
| |
| /* |
| * For filemask and dirmask, the ith bit corresponds to whether the |
| * ith entry is a file (filemask) or a directory (dirmask). Thus, |
| * filemask & dirmask is always zero, and filemask | dirmask is at |
| * most 7 but can be less when a path does not appear as either a |
| * file or a directory on at least one side of history. |
| * |
| * Note that these masks are related to enum merge_side, as the ith |
| * entry corresponds to side i. |
| * |
| * These values come from a traverse_trees() call; more info may be |
| * found looking at tree-walk.h's struct traverse_info, |
| * particularly the documentation above the "fn" member (note that |
| * filemask = mask & ~dirmask from that documentation). |
| */ |
| unsigned filemask:3; |
| unsigned dirmask:3; |
| |
| /* |
| * Optimization to track which stages match, to avoid the need to |
| * recompute it in multiple steps. Either 0 or at least 2 bits are |
| * set; if at least 2 bits are set, their corresponding stages match. |
| */ |
| unsigned match_mask:3; |
| }; |
| |
| /*** Function Grouping: various utility functions ***/ |
| |
| /* |
| * For the next three macros, see warning for conflict_info.merged. |
| * |
| * In each of the below, mi is a struct merged_info*, and ci was defined |
| * as a struct conflict_info* (but we need to verify ci isn't actually |
| * pointed at a struct merged_info*). |
| * |
| * INITIALIZE_CI: Assign ci to mi but only if it's safe; set to NULL otherwise. |
| * VERIFY_CI: Ensure that something we assigned to a conflict_info* is one. |
| * ASSIGN_AND_VERIFY_CI: Similar to VERIFY_CI but do assignment first. |
| */ |
| #define INITIALIZE_CI(ci, mi) do { \ |
| (ci) = (!(mi) || (mi)->clean) ? NULL : (struct conflict_info *)(mi); \ |
| } while (0) |
| #define VERIFY_CI(ci) assert(ci && !ci->merged.clean); |
| #define ASSIGN_AND_VERIFY_CI(ci, mi) do { \ |
| (ci) = (struct conflict_info *)(mi); \ |
| assert((ci) && !(mi)->clean); \ |
| } while (0) |
| |
| static void free_strmap_strings(struct strmap *map) |
| { |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| |
| strmap_for_each_entry(map, &iter, entry) { |
| free((char*)entry->key); |
| } |
| } |
| |
| static void clear_or_reinit_internal_opts(struct merge_options_internal *opti, |
| int reinitialize) |
| { |
| struct rename_info *renames = &opti->renames; |
| int i; |
| void (*strmap_clear_func)(struct strmap *, int) = |
| reinitialize ? strmap_partial_clear : strmap_clear; |
| void (*strintmap_clear_func)(struct strintmap *) = |
| reinitialize ? strintmap_partial_clear : strintmap_clear; |
| void (*strset_clear_func)(struct strset *) = |
| reinitialize ? strset_partial_clear : strset_clear; |
| |
| strmap_clear_func(&opti->paths, 0); |
| |
| /* |
| * All keys and values in opti->conflicted are a subset of those in |
| * opti->paths. We don't want to deallocate anything twice, so we |
| * don't free the keys and we pass 0 for free_values. |
| */ |
| strmap_clear_func(&opti->conflicted, 0); |
| |
| if (opti->attr_index.cache_nr) /* true iff opt->renormalize */ |
| discard_index(&opti->attr_index); |
| |
| /* Free memory used by various renames maps */ |
| for (i = MERGE_SIDE1; i <= MERGE_SIDE2; ++i) { |
| strintmap_clear_func(&renames->dirs_removed[i]); |
| strmap_clear_func(&renames->dir_renames[i], 0); |
| strintmap_clear_func(&renames->relevant_sources[i]); |
| if (!reinitialize) |
| assert(renames->cached_pairs_valid_side == 0); |
| if (i != renames->cached_pairs_valid_side && |
| -1 != renames->cached_pairs_valid_side) { |
| strset_clear_func(&renames->cached_target_names[i]); |
| strmap_clear_func(&renames->cached_pairs[i], 1); |
| strset_clear_func(&renames->cached_irrelevant[i]); |
| partial_clear_dir_rename_count(&renames->dir_rename_count[i]); |
| if (!reinitialize) |
| strmap_clear(&renames->dir_rename_count[i], 1); |
| } |
| } |
| for (i = MERGE_SIDE1; i <= MERGE_SIDE2; ++i) { |
| strintmap_clear_func(&renames->deferred[i].possible_trivial_merges); |
| strset_clear_func(&renames->deferred[i].target_dirs); |
| renames->deferred[i].trivial_merges_okay = 1; /* 1 == maybe */ |
| } |
| renames->cached_pairs_valid_side = 0; |
| renames->dir_rename_mask = 0; |
| |
| if (!reinitialize) { |
| struct hashmap_iter iter; |
| struct strmap_entry *e; |
| |
| /* Release and free each strbuf found in output */ |
| strmap_for_each_entry(&opti->output, &iter, e) { |
| struct strbuf *sb = e->value; |
| strbuf_release(sb); |
| /* |
| * While strictly speaking we don't need to free(sb) |
| * here because we could pass free_values=1 when |
| * calling strmap_clear() on opti->output, that would |
| * require strmap_clear to do another |
| * strmap_for_each_entry() loop, so we just free it |
| * while we're iterating anyway. |
| */ |
| free(sb); |
| } |
| strmap_clear(&opti->output, 0); |
| } |
| |
| mem_pool_discard(&opti->pool, 0); |
| |
| /* Clean out callback_data as well. */ |
| FREE_AND_NULL(renames->callback_data); |
| renames->callback_data_nr = renames->callback_data_alloc = 0; |
| } |
| |
| __attribute__((format (printf, 2, 3))) |
| static int err(struct merge_options *opt, const char *err, ...) |
| { |
| va_list params; |
| struct strbuf sb = STRBUF_INIT; |
| |
| strbuf_addstr(&sb, "error: "); |
| va_start(params, err); |
| strbuf_vaddf(&sb, err, params); |
| va_end(params); |
| |
| error("%s", sb.buf); |
| strbuf_release(&sb); |
| |
| return -1; |
| } |
| |
| static void format_commit(struct strbuf *sb, |
| int indent, |
| struct repository *repo, |
| struct commit *commit) |
| { |
| struct merge_remote_desc *desc; |
| struct pretty_print_context ctx = {0}; |
| ctx.abbrev = DEFAULT_ABBREV; |
| |
| strbuf_addchars(sb, ' ', indent); |
| desc = merge_remote_util(commit); |
| if (desc) { |
| strbuf_addf(sb, "virtual %s\n", desc->name); |
| return; |
| } |
| |
| repo_format_commit_message(repo, commit, "%h %s", sb, &ctx); |
| strbuf_addch(sb, '\n'); |
| } |
| |
| __attribute__((format (printf, 4, 5))) |
| static void path_msg(struct merge_options *opt, |
| const char *path, |
| int omittable_hint, /* skippable under --remerge-diff */ |
| const char *fmt, ...) |
| { |
| va_list ap; |
| struct strbuf *sb, *dest; |
| struct strbuf tmp = STRBUF_INIT; |
| |
| if (opt->record_conflict_msgs_as_headers && omittable_hint) |
| return; /* Do not record mere hints in headers */ |
| if (opt->priv->call_depth && opt->verbosity < 5) |
| return; /* Ignore messages from inner merges */ |
| |
| sb = strmap_get(&opt->priv->output, path); |
| if (!sb) { |
| sb = xmalloc(sizeof(*sb)); |
| strbuf_init(sb, 0); |
| strmap_put(&opt->priv->output, path, sb); |
| } |
| |
| dest = (opt->record_conflict_msgs_as_headers ? &tmp : sb); |
| |
| va_start(ap, fmt); |
| if (opt->priv->call_depth) { |
| strbuf_addchars(dest, ' ', 2); |
| strbuf_addstr(dest, "From inner merge:"); |
| strbuf_addchars(dest, ' ', opt->priv->call_depth * 2); |
| } |
| strbuf_vaddf(dest, fmt, ap); |
| va_end(ap); |
| |
| if (opt->record_conflict_msgs_as_headers) { |
| int i_sb = 0, i_tmp = 0; |
| |
| /* Start with the specified prefix */ |
| if (opt->msg_header_prefix) |
| strbuf_addf(sb, "%s ", opt->msg_header_prefix); |
| |
| /* Copy tmp to sb, adding spaces after newlines */ |
| strbuf_grow(sb, sb->len + 2*tmp.len); /* more than sufficient */ |
| for (; i_tmp < tmp.len; i_tmp++, i_sb++) { |
| /* Copy next character from tmp to sb */ |
| sb->buf[sb->len + i_sb] = tmp.buf[i_tmp]; |
| |
| /* If we copied a newline, add a space */ |
| if (tmp.buf[i_tmp] == '\n') |
| sb->buf[++i_sb] = ' '; |
| } |
| /* Update length and ensure it's NUL-terminated */ |
| sb->len += i_sb; |
| sb->buf[sb->len] = '\0'; |
| |
| strbuf_release(&tmp); |
| } |
| |
| /* Add final newline character to sb */ |
| strbuf_addch(sb, '\n'); |
| } |
| |
| static struct diff_filespec *pool_alloc_filespec(struct mem_pool *pool, |
| const char *path) |
| { |
| /* Similar to alloc_filespec(), but allocate from pool and reuse path */ |
| struct diff_filespec *spec; |
| |
| spec = mem_pool_calloc(pool, 1, sizeof(*spec)); |
| spec->path = (char*)path; /* spec won't modify it */ |
| |
| spec->count = 1; |
| spec->is_binary = -1; |
| return spec; |
| } |
| |
| static struct diff_filepair *pool_diff_queue(struct mem_pool *pool, |
| struct diff_queue_struct *queue, |
| struct diff_filespec *one, |
| struct diff_filespec *two) |
| { |
| /* Same code as diff_queue(), except allocate from pool */ |
| struct diff_filepair *dp; |
| |
| dp = mem_pool_calloc(pool, 1, sizeof(*dp)); |
| dp->one = one; |
| dp->two = two; |
| if (queue) |
| diff_q(queue, dp); |
| return dp; |
| } |
| |
| /* add a string to a strbuf, but converting "/" to "_" */ |
| static void add_flattened_path(struct strbuf *out, const char *s) |
| { |
| size_t i = out->len; |
| strbuf_addstr(out, s); |
| for (; i < out->len; i++) |
| if (out->buf[i] == '/') |
| out->buf[i] = '_'; |
| } |
| |
| static char *unique_path(struct merge_options *opt, |
| const char *path, |
| const char *branch) |
| { |
| char *ret = NULL; |
| struct strbuf newpath = STRBUF_INIT; |
| int suffix = 0; |
| size_t base_len; |
| struct strmap *existing_paths = &opt->priv->paths; |
| |
| strbuf_addf(&newpath, "%s~", path); |
| add_flattened_path(&newpath, branch); |
| |
| base_len = newpath.len; |
| while (strmap_contains(existing_paths, newpath.buf)) { |
| strbuf_setlen(&newpath, base_len); |
| strbuf_addf(&newpath, "_%d", suffix++); |
| } |
| |
| /* Track the new path in our memory pool */ |
| ret = mem_pool_alloc(&opt->priv->pool, newpath.len + 1); |
| memcpy(ret, newpath.buf, newpath.len + 1); |
| strbuf_release(&newpath); |
| return ret; |
| } |
| |
| /*** Function Grouping: functions related to collect_merge_info() ***/ |
| |
| static int traverse_trees_wrapper_callback(int n, |
| unsigned long mask, |
| unsigned long dirmask, |
| struct name_entry *names, |
| struct traverse_info *info) |
| { |
| struct merge_options *opt = info->data; |
| struct rename_info *renames = &opt->priv->renames; |
| unsigned filemask = mask & ~dirmask; |
| |
| assert(n==3); |
| |
| if (!renames->callback_data_traverse_path) |
| renames->callback_data_traverse_path = xstrdup(info->traverse_path); |
| |
| if (filemask && filemask == renames->dir_rename_mask) |
| renames->dir_rename_mask = 0x07; |
| |
| ALLOC_GROW(renames->callback_data, renames->callback_data_nr + 1, |
| renames->callback_data_alloc); |
| renames->callback_data[renames->callback_data_nr].mask = mask; |
| renames->callback_data[renames->callback_data_nr].dirmask = dirmask; |
| COPY_ARRAY(renames->callback_data[renames->callback_data_nr].names, |
| names, 3); |
| renames->callback_data_nr++; |
| |
| return mask; |
| } |
| |
| /* |
| * Much like traverse_trees(), BUT: |
| * - read all the tree entries FIRST, saving them |
| * - note that the above step provides an opportunity to compute necessary |
| * additional details before the "real" traversal |
| * - loop through the saved entries and call the original callback on them |
| */ |
| static int traverse_trees_wrapper(struct index_state *istate, |
| int n, |
| struct tree_desc *t, |
| struct traverse_info *info) |
| { |
| int ret, i, old_offset; |
| traverse_callback_t old_fn; |
| char *old_callback_data_traverse_path; |
| struct merge_options *opt = info->data; |
| struct rename_info *renames = &opt->priv->renames; |
| |
| assert(renames->dir_rename_mask == 2 || renames->dir_rename_mask == 4); |
| |
| old_callback_data_traverse_path = renames->callback_data_traverse_path; |
| old_fn = info->fn; |
| old_offset = renames->callback_data_nr; |
| |
| renames->callback_data_traverse_path = NULL; |
| info->fn = traverse_trees_wrapper_callback; |
| ret = traverse_trees(istate, n, t, info); |
| if (ret < 0) |
| return ret; |
| |
| info->traverse_path = renames->callback_data_traverse_path; |
| info->fn = old_fn; |
| for (i = old_offset; i < renames->callback_data_nr; ++i) { |
| info->fn(n, |
| renames->callback_data[i].mask, |
| renames->callback_data[i].dirmask, |
| renames->callback_data[i].names, |
| info); |
| } |
| |
| renames->callback_data_nr = old_offset; |
| free(renames->callback_data_traverse_path); |
| renames->callback_data_traverse_path = old_callback_data_traverse_path; |
| info->traverse_path = NULL; |
| return 0; |
| } |
| |
| static void setup_path_info(struct merge_options *opt, |
| struct string_list_item *result, |
| const char *current_dir_name, |
| int current_dir_name_len, |
| char *fullpath, /* we'll take over ownership */ |
| struct name_entry *names, |
| struct name_entry *merged_version, |
| unsigned is_null, /* boolean */ |
| unsigned df_conflict, /* boolean */ |
| unsigned filemask, |
| unsigned dirmask, |
| int resolved /* boolean */) |
| { |
| /* result->util is void*, so mi is a convenience typed variable */ |
| struct merged_info *mi; |
| |
| assert(!is_null || resolved); |
| assert(!df_conflict || !resolved); /* df_conflict implies !resolved */ |
| assert(resolved == (merged_version != NULL)); |
| |
| mi = mem_pool_calloc(&opt->priv->pool, 1, |
| resolved ? sizeof(struct merged_info) : |
| sizeof(struct conflict_info)); |
| mi->directory_name = current_dir_name; |
| mi->basename_offset = current_dir_name_len; |
| mi->clean = !!resolved; |
| if (resolved) { |
| mi->result.mode = merged_version->mode; |
| oidcpy(&mi->result.oid, &merged_version->oid); |
| mi->is_null = !!is_null; |
| } else { |
| int i; |
| struct conflict_info *ci; |
| |
| ASSIGN_AND_VERIFY_CI(ci, mi); |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) { |
| ci->pathnames[i] = fullpath; |
| ci->stages[i].mode = names[i].mode; |
| oidcpy(&ci->stages[i].oid, &names[i].oid); |
| } |
| ci->filemask = filemask; |
| ci->dirmask = dirmask; |
| ci->df_conflict = !!df_conflict; |
| if (dirmask) |
| /* |
| * Assume is_null for now, but if we have entries |
| * under the directory then when it is complete in |
| * write_completed_directory() it'll update this. |
| * Also, for D/F conflicts, we have to handle the |
| * directory first, then clear this bit and process |
| * the file to see how it is handled -- that occurs |
| * near the top of process_entry(). |
| */ |
| mi->is_null = 1; |
| } |
| strmap_put(&opt->priv->paths, fullpath, mi); |
| result->string = fullpath; |
| result->util = mi; |
| } |
| |
| static void add_pair(struct merge_options *opt, |
| struct name_entry *names, |
| const char *pathname, |
| unsigned side, |
| unsigned is_add /* if false, is_delete */, |
| unsigned match_mask, |
| unsigned dir_rename_mask) |
| { |
| struct diff_filespec *one, *two; |
| struct rename_info *renames = &opt->priv->renames; |
| int names_idx = is_add ? side : 0; |
| |
| if (is_add) { |
| assert(match_mask == 0 || match_mask == 6); |
| if (strset_contains(&renames->cached_target_names[side], |
| pathname)) |
| return; |
| } else { |
| unsigned content_relevant = (match_mask == 0); |
| unsigned location_relevant = (dir_rename_mask == 0x07); |
| |
| assert(match_mask == 0 || match_mask == 3 || match_mask == 5); |
| |
| /* |
| * If pathname is found in cached_irrelevant[side] due to |
| * previous pick but for this commit content is relevant, |
| * then we need to remove it from cached_irrelevant. |
| */ |
| if (content_relevant) |
| /* strset_remove is no-op if strset doesn't have key */ |
| strset_remove(&renames->cached_irrelevant[side], |
| pathname); |
| |
| /* |
| * We do not need to re-detect renames for paths that we already |
| * know the pairing, i.e. for cached_pairs (or |
| * cached_irrelevant). However, handle_deferred_entries() needs |
| * to loop over the union of keys from relevant_sources[side] and |
| * cached_pairs[side], so for simplicity we set relevant_sources |
| * for all the cached_pairs too and then strip them back out in |
| * prune_cached_from_relevant() at the beginning of |
| * detect_regular_renames(). |
| */ |
| if (content_relevant || location_relevant) { |
| /* content_relevant trumps location_relevant */ |
| strintmap_set(&renames->relevant_sources[side], pathname, |
| content_relevant ? RELEVANT_CONTENT : RELEVANT_LOCATION); |
| } |
| |
| /* |
| * Avoid creating pair if we've already cached rename results. |
| * Note that we do this after setting relevant_sources[side] |
| * as noted in the comment above. |
| */ |
| if (strmap_contains(&renames->cached_pairs[side], pathname) || |
| strset_contains(&renames->cached_irrelevant[side], pathname)) |
| return; |
| } |
| |
| one = pool_alloc_filespec(&opt->priv->pool, pathname); |
| two = pool_alloc_filespec(&opt->priv->pool, pathname); |
| fill_filespec(is_add ? two : one, |
| &names[names_idx].oid, 1, names[names_idx].mode); |
| pool_diff_queue(&opt->priv->pool, &renames->pairs[side], one, two); |
| } |
| |
| static void collect_rename_info(struct merge_options *opt, |
| struct name_entry *names, |
| const char *dirname, |
| const char *fullname, |
| unsigned filemask, |
| unsigned dirmask, |
| unsigned match_mask) |
| { |
| struct rename_info *renames = &opt->priv->renames; |
| unsigned side; |
| |
| /* |
| * Update dir_rename_mask (determines ignore-rename-source validity) |
| * |
| * dir_rename_mask helps us keep track of when directory rename |
| * detection may be relevant. Basically, whenver a directory is |
| * removed on one side of history, and a file is added to that |
| * directory on the other side of history, directory rename |
| * detection is relevant (meaning we have to detect renames for all |
| * files within that directory to deduce where the directory |
| * moved). Also, whenever a directory needs directory rename |
| * detection, due to the "majority rules" choice for where to move |
| * it (see t6423 testcase 1f), we also need to detect renames for |
| * all files within subdirectories of that directory as well. |
| * |
| * Here we haven't looked at files within the directory yet, we are |
| * just looking at the directory itself. So, if we aren't yet in |
| * a case where a parent directory needed directory rename detection |
| * (i.e. dir_rename_mask != 0x07), and if the directory was removed |
| * on one side of history, record the mask of the other side of |
| * history in dir_rename_mask. |
| */ |
| if (renames->dir_rename_mask != 0x07 && |
| (dirmask == 3 || dirmask == 5)) { |
| /* simple sanity check */ |
| assert(renames->dir_rename_mask == 0 || |
| renames->dir_rename_mask == (dirmask & ~1)); |
| /* update dir_rename_mask; have it record mask of new side */ |
| renames->dir_rename_mask = (dirmask & ~1); |
| } |
| |
| /* Update dirs_removed, as needed */ |
| if (dirmask == 1 || dirmask == 3 || dirmask == 5) { |
| /* absent_mask = 0x07 - dirmask; sides = absent_mask/2 */ |
| unsigned sides = (0x07 - dirmask)/2; |
| unsigned relevance = (renames->dir_rename_mask == 0x07) ? |
| RELEVANT_FOR_ANCESTOR : NOT_RELEVANT; |
| /* |
| * Record relevance of this directory. However, note that |
| * when collect_merge_info_callback() recurses into this |
| * directory and calls collect_rename_info() on paths |
| * within that directory, if we find a path that was added |
| * to this directory on the other side of history, we will |
| * upgrade this value to RELEVANT_FOR_SELF; see below. |
| */ |
| if (sides & 1) |
| strintmap_set(&renames->dirs_removed[1], fullname, |
| relevance); |
| if (sides & 2) |
| strintmap_set(&renames->dirs_removed[2], fullname, |
| relevance); |
| } |
| |
| /* |
| * Here's the block that potentially upgrades to RELEVANT_FOR_SELF. |
| * When we run across a file added to a directory. In such a case, |
| * find the directory of the file and upgrade its relevance. |
| */ |
| if (renames->dir_rename_mask == 0x07 && |
| (filemask == 2 || filemask == 4)) { |
| /* |
| * Need directory rename for parent directory on other side |
| * of history from added file. Thus |
| * side = (~filemask & 0x06) >> 1 |
| * or |
| * side = 3 - (filemask/2). |
| */ |
| unsigned side = 3 - (filemask >> 1); |
| strintmap_set(&renames->dirs_removed[side], dirname, |
| RELEVANT_FOR_SELF); |
| } |
| |
| if (filemask == 0 || filemask == 7) |
| return; |
| |
| for (side = MERGE_SIDE1; side <= MERGE_SIDE2; ++side) { |
| unsigned side_mask = (1 << side); |
| |
| /* Check for deletion on side */ |
| if ((filemask & 1) && !(filemask & side_mask)) |
| add_pair(opt, names, fullname, side, 0 /* delete */, |
| match_mask & filemask, |
| renames->dir_rename_mask); |
| |
| /* Check for addition on side */ |
| if (!(filemask & 1) && (filemask & side_mask)) |
| add_pair(opt, names, fullname, side, 1 /* add */, |
| match_mask & filemask, |
| renames->dir_rename_mask); |
| } |
| } |
| |
| static int collect_merge_info_callback(int n, |
| unsigned long mask, |
| unsigned long dirmask, |
| struct name_entry *names, |
| struct traverse_info *info) |
| { |
| /* |
| * n is 3. Always. |
| * common ancestor (mbase) has mask 1, and stored in index 0 of names |
| * head of side 1 (side1) has mask 2, and stored in index 1 of names |
| * head of side 2 (side2) has mask 4, and stored in index 2 of names |
| */ |
| struct merge_options *opt = info->data; |
| struct merge_options_internal *opti = opt->priv; |
| struct rename_info *renames = &opt->priv->renames; |
| struct string_list_item pi; /* Path Info */ |
| struct conflict_info *ci; /* typed alias to pi.util (which is void*) */ |
| struct name_entry *p; |
| size_t len; |
| char *fullpath; |
| const char *dirname = opti->current_dir_name; |
| unsigned prev_dir_rename_mask = renames->dir_rename_mask; |
| unsigned filemask = mask & ~dirmask; |
| unsigned match_mask = 0; /* will be updated below */ |
| unsigned mbase_null = !(mask & 1); |
| unsigned side1_null = !(mask & 2); |
| unsigned side2_null = !(mask & 4); |
| unsigned side1_matches_mbase = (!side1_null && !mbase_null && |
| names[0].mode == names[1].mode && |
| oideq(&names[0].oid, &names[1].oid)); |
| unsigned side2_matches_mbase = (!side2_null && !mbase_null && |
| names[0].mode == names[2].mode && |
| oideq(&names[0].oid, &names[2].oid)); |
| unsigned sides_match = (!side1_null && !side2_null && |
| names[1].mode == names[2].mode && |
| oideq(&names[1].oid, &names[2].oid)); |
| |
| /* |
| * Note: When a path is a file on one side of history and a directory |
| * in another, we have a directory/file conflict. In such cases, if |
| * the conflict doesn't resolve from renames and deletions, then we |
| * always leave directories where they are and move files out of the |
| * way. Thus, while struct conflict_info has a df_conflict field to |
| * track such conflicts, we ignore that field for any directories at |
| * a path and only pay attention to it for files at the given path. |
| * The fact that we leave directories were they are also means that |
| * we do not need to worry about getting additional df_conflict |
| * information propagated from parent directories down to children |
| * (unlike, say traverse_trees_recursive() in unpack-trees.c, which |
| * sets a newinfo.df_conflicts field specifically to propagate it). |
| */ |
| unsigned df_conflict = (filemask != 0) && (dirmask != 0); |
| |
| /* n = 3 is a fundamental assumption. */ |
| if (n != 3) |
| BUG("Called collect_merge_info_callback wrong"); |
| |
| /* |
| * A bunch of sanity checks verifying that traverse_trees() calls |
| * us the way I expect. Could just remove these at some point, |
| * though maybe they are helpful to future code readers. |
| */ |
| assert(mbase_null == is_null_oid(&names[0].oid)); |
| assert(side1_null == is_null_oid(&names[1].oid)); |
| assert(side2_null == is_null_oid(&names[2].oid)); |
| assert(!mbase_null || !side1_null || !side2_null); |
| assert(mask > 0 && mask < 8); |
| |
| /* Determine match_mask */ |
| if (side1_matches_mbase) |
| match_mask = (side2_matches_mbase ? 7 : 3); |
| else if (side2_matches_mbase) |
| match_mask = 5; |
| else if (sides_match) |
| match_mask = 6; |
| |
| /* |
| * Get the name of the relevant filepath, which we'll pass to |
| * setup_path_info() for tracking. |
| */ |
| p = names; |
| while (!p->mode) |
| p++; |
| len = traverse_path_len(info, p->pathlen); |
| |
| /* +1 in both of the following lines to include the NUL byte */ |
| fullpath = mem_pool_alloc(&opt->priv->pool, len + 1); |
| make_traverse_path(fullpath, len + 1, info, p->path, p->pathlen); |
| |
| /* |
| * If mbase, side1, and side2 all match, we can resolve early. Even |
| * if these are trees, there will be no renames or anything |
| * underneath. |
| */ |
| if (side1_matches_mbase && side2_matches_mbase) { |
| /* mbase, side1, & side2 all match; use mbase as resolution */ |
| setup_path_info(opt, &pi, dirname, info->pathlen, fullpath, |
| names, names+0, mbase_null, 0 /* df_conflict */, |
| filemask, dirmask, 1 /* resolved */); |
| return mask; |
| } |
| |
| /* |
| * If the sides match, and all three paths are present and are |
| * files, then we can take either as the resolution. We can't do |
| * this with trees, because there may be rename sources from the |
| * merge_base. |
| */ |
| if (sides_match && filemask == 0x07) { |
| /* use side1 (== side2) version as resolution */ |
| setup_path_info(opt, &pi, dirname, info->pathlen, fullpath, |
| names, names+1, side1_null, 0, |
| filemask, dirmask, 1); |
| return mask; |
| } |
| |
| /* |
| * If side1 matches mbase and all three paths are present and are |
| * files, then we can use side2 as the resolution. We cannot |
| * necessarily do so this for trees, because there may be rename |
| * destinations within side2. |
| */ |
| if (side1_matches_mbase && filemask == 0x07) { |
| /* use side2 version as resolution */ |
| setup_path_info(opt, &pi, dirname, info->pathlen, fullpath, |
| names, names+2, side2_null, 0, |
| filemask, dirmask, 1); |
| return mask; |
| } |
| |
| /* Similar to above but swapping sides 1 and 2 */ |
| if (side2_matches_mbase && filemask == 0x07) { |
| /* use side1 version as resolution */ |
| setup_path_info(opt, &pi, dirname, info->pathlen, fullpath, |
| names, names+1, side1_null, 0, |
| filemask, dirmask, 1); |
| return mask; |
| } |
| |
| /* |
| * Sometimes we can tell that a source path need not be included in |
| * rename detection -- namely, whenever either |
| * side1_matches_mbase && side2_null |
| * or |
| * side2_matches_mbase && side1_null |
| * However, we call collect_rename_info() even in those cases, |
| * because exact renames are cheap and would let us remove both a |
| * source and destination path. We'll cull the unneeded sources |
| * later. |
| */ |
| collect_rename_info(opt, names, dirname, fullpath, |
| filemask, dirmask, match_mask); |
| |
| /* |
| * None of the special cases above matched, so we have a |
| * provisional conflict. (Rename detection might allow us to |
| * unconflict some more cases, but that comes later so all we can |
| * do now is record the different non-null file hashes.) |
| */ |
| setup_path_info(opt, &pi, dirname, info->pathlen, fullpath, |
| names, NULL, 0, df_conflict, filemask, dirmask, 0); |
| |
| ci = pi.util; |
| VERIFY_CI(ci); |
| ci->match_mask = match_mask; |
| |
| /* If dirmask, recurse into subdirectories */ |
| if (dirmask) { |
| struct traverse_info newinfo; |
| struct tree_desc t[3]; |
| void *buf[3] = {NULL, NULL, NULL}; |
| const char *original_dir_name; |
| int i, ret, side; |
| |
| /* |
| * Check for whether we can avoid recursing due to one side |
| * matching the merge base. The side that does NOT match is |
| * the one that might have a rename destination we need. |
| */ |
| assert(!side1_matches_mbase || !side2_matches_mbase); |
| side = side1_matches_mbase ? MERGE_SIDE2 : |
| side2_matches_mbase ? MERGE_SIDE1 : MERGE_BASE; |
| if (filemask == 0 && (dirmask == 2 || dirmask == 4)) { |
| /* |
| * Also defer recursing into new directories; set up a |
| * few variables to let us do so. |
| */ |
| ci->match_mask = (7 - dirmask); |
| side = dirmask / 2; |
| } |
| if (renames->dir_rename_mask != 0x07 && |
| side != MERGE_BASE && |
| renames->deferred[side].trivial_merges_okay && |
| !strset_contains(&renames->deferred[side].target_dirs, |
| pi.string)) { |
| strintmap_set(&renames->deferred[side].possible_trivial_merges, |
| pi.string, renames->dir_rename_mask); |
| renames->dir_rename_mask = prev_dir_rename_mask; |
| return mask; |
| } |
| |
| /* We need to recurse */ |
| ci->match_mask &= filemask; |
| newinfo = *info; |
| newinfo.prev = info; |
| newinfo.name = p->path; |
| newinfo.namelen = p->pathlen; |
| newinfo.pathlen = st_add3(newinfo.pathlen, p->pathlen, 1); |
| /* |
| * If this directory we are about to recurse into cared about |
| * its parent directory (the current directory) having a D/F |
| * conflict, then we'd propagate the masks in this way: |
| * newinfo.df_conflicts |= (mask & ~dirmask); |
| * But we don't worry about propagating D/F conflicts. (See |
| * comment near setting of local df_conflict variable near |
| * the beginning of this function). |
| */ |
| |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) { |
| if (i == 1 && side1_matches_mbase) |
| t[1] = t[0]; |
| else if (i == 2 && side2_matches_mbase) |
| t[2] = t[0]; |
| else if (i == 2 && sides_match) |
| t[2] = t[1]; |
| else { |
| const struct object_id *oid = NULL; |
| if (dirmask & 1) |
| oid = &names[i].oid; |
| buf[i] = fill_tree_descriptor(opt->repo, |
| t + i, oid); |
| } |
| dirmask >>= 1; |
| } |
| |
| original_dir_name = opti->current_dir_name; |
| opti->current_dir_name = pi.string; |
| if (renames->dir_rename_mask == 0 || |
| renames->dir_rename_mask == 0x07) |
| ret = traverse_trees(NULL, 3, t, &newinfo); |
| else |
| ret = traverse_trees_wrapper(NULL, 3, t, &newinfo); |
| opti->current_dir_name = original_dir_name; |
| renames->dir_rename_mask = prev_dir_rename_mask; |
| |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) |
| free(buf[i]); |
| |
| if (ret < 0) |
| return -1; |
| } |
| |
| return mask; |
| } |
| |
| static void resolve_trivial_directory_merge(struct conflict_info *ci, int side) |
| { |
| VERIFY_CI(ci); |
| assert((side == 1 && ci->match_mask == 5) || |
| (side == 2 && ci->match_mask == 3)); |
| oidcpy(&ci->merged.result.oid, &ci->stages[side].oid); |
| ci->merged.result.mode = ci->stages[side].mode; |
| ci->merged.is_null = is_null_oid(&ci->stages[side].oid); |
| ci->match_mask = 0; |
| ci->merged.clean = 1; /* (ci->filemask == 0); */ |
| } |
| |
| static int handle_deferred_entries(struct merge_options *opt, |
| struct traverse_info *info) |
| { |
| struct rename_info *renames = &opt->priv->renames; |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| int side, ret = 0; |
| int path_count_before, path_count_after = 0; |
| |
| path_count_before = strmap_get_size(&opt->priv->paths); |
| for (side = MERGE_SIDE1; side <= MERGE_SIDE2; side++) { |
| unsigned optimization_okay = 1; |
| struct strintmap copy; |
| |
| /* Loop over the set of paths we need to know rename info for */ |
| strset_for_each_entry(&renames->relevant_sources[side], |
| &iter, entry) { |
| char *rename_target, *dir, *dir_marker; |
| struct strmap_entry *e; |
| |
| /* |
| * If we don't know delete/rename info for this path, |
| * then we need to recurse into all trees to get all |
| * adds to make sure we have it. |
| */ |
| if (strset_contains(&renames->cached_irrelevant[side], |
| entry->key)) |
| continue; |
| e = strmap_get_entry(&renames->cached_pairs[side], |
| entry->key); |
| if (!e) { |
| optimization_okay = 0; |
| break; |
| } |
| |
| /* If this is a delete, we have enough info already */ |
| rename_target = e->value; |
| if (!rename_target) |
| continue; |
| |
| /* If we already walked the rename target, we're good */ |
| if (strmap_contains(&opt->priv->paths, rename_target)) |
| continue; |
| |
| /* |
| * Otherwise, we need to get a list of directories that |
| * will need to be recursed into to get this |
| * rename_target. |
| */ |
| dir = xstrdup(rename_target); |
| while ((dir_marker = strrchr(dir, '/'))) { |
| *dir_marker = '\0'; |
| if (strset_contains(&renames->deferred[side].target_dirs, |
| dir)) |
| break; |
| strset_add(&renames->deferred[side].target_dirs, |
| dir); |
| } |
| free(dir); |
| } |
| renames->deferred[side].trivial_merges_okay = optimization_okay; |
| /* |
| * We need to recurse into any directories in |
| * possible_trivial_merges[side] found in target_dirs[side]. |
| * But when we recurse, we may need to queue up some of the |
| * subdirectories for possible_trivial_merges[side]. Since |
| * we can't safely iterate through a hashmap while also adding |
| * entries, move the entries into 'copy', iterate over 'copy', |
| * and then we'll also iterate anything added into |
| * possible_trivial_merges[side] once this loop is done. |
| */ |
| copy = renames->deferred[side].possible_trivial_merges; |
| strintmap_init_with_options(&renames->deferred[side].possible_trivial_merges, |
| 0, |
| &opt->priv->pool, |
| 0); |
| strintmap_for_each_entry(©, &iter, entry) { |
| const char *path = entry->key; |
| unsigned dir_rename_mask = (intptr_t)entry->value; |
| struct conflict_info *ci; |
| unsigned dirmask; |
| struct tree_desc t[3]; |
| void *buf[3] = {NULL,}; |
| int i; |
| |
| ci = strmap_get(&opt->priv->paths, path); |
| VERIFY_CI(ci); |
| dirmask = ci->dirmask; |
| |
| if (optimization_okay && |
| !strset_contains(&renames->deferred[side].target_dirs, |
| path)) { |
| resolve_trivial_directory_merge(ci, side); |
| continue; |
| } |
| |
| info->name = path; |
| info->namelen = strlen(path); |
| info->pathlen = info->namelen + 1; |
| |
| for (i = 0; i < 3; i++, dirmask >>= 1) { |
| if (i == 1 && ci->match_mask == 3) |
| t[1] = t[0]; |
| else if (i == 2 && ci->match_mask == 5) |
| t[2] = t[0]; |
| else if (i == 2 && ci->match_mask == 6) |
| t[2] = t[1]; |
| else { |
| const struct object_id *oid = NULL; |
| if (dirmask & 1) |
| oid = &ci->stages[i].oid; |
| buf[i] = fill_tree_descriptor(opt->repo, |
| t+i, oid); |
| } |
| } |
| |
| ci->match_mask &= ci->filemask; |
| opt->priv->current_dir_name = path; |
| renames->dir_rename_mask = dir_rename_mask; |
| if (renames->dir_rename_mask == 0 || |
| renames->dir_rename_mask == 0x07) |
| ret = traverse_trees(NULL, 3, t, info); |
| else |
| ret = traverse_trees_wrapper(NULL, 3, t, info); |
| |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) |
| free(buf[i]); |
| |
| if (ret < 0) |
| return ret; |
| } |
| strintmap_clear(©); |
| strintmap_for_each_entry(&renames->deferred[side].possible_trivial_merges, |
| &iter, entry) { |
| const char *path = entry->key; |
| struct conflict_info *ci; |
| |
| ci = strmap_get(&opt->priv->paths, path); |
| VERIFY_CI(ci); |
| |
| assert(renames->deferred[side].trivial_merges_okay && |
| !strset_contains(&renames->deferred[side].target_dirs, |
| path)); |
| resolve_trivial_directory_merge(ci, side); |
| } |
| if (!optimization_okay || path_count_after) |
| path_count_after = strmap_get_size(&opt->priv->paths); |
| } |
| if (path_count_after) { |
| /* |
| * The choice of wanted_factor here does not affect |
| * correctness, only performance. When the |
| * path_count_after / path_count_before |
| * ratio is high, redoing after renames is a big |
| * performance boost. I suspect that redoing is a wash |
| * somewhere near a value of 2, and below that redoing will |
| * slow things down. I applied a fudge factor and picked |
| * 3; see the commit message when this was introduced for |
| * back of the envelope calculations for this ratio. |
| */ |
| const int wanted_factor = 3; |
| |
| /* We should only redo collect_merge_info one time */ |
| assert(renames->redo_after_renames == 0); |
| |
| if (path_count_after / path_count_before >= wanted_factor) { |
| renames->redo_after_renames = 1; |
| renames->cached_pairs_valid_side = -1; |
| } |
| } else if (renames->redo_after_renames == 2) |
| renames->redo_after_renames = 0; |
| return ret; |
| } |
| |
| static int collect_merge_info(struct merge_options *opt, |
| struct tree *merge_base, |
| struct tree *side1, |
| struct tree *side2) |
| { |
| int ret; |
| struct tree_desc t[3]; |
| struct traverse_info info; |
| |
| opt->priv->toplevel_dir = ""; |
| opt->priv->current_dir_name = opt->priv->toplevel_dir; |
| setup_traverse_info(&info, opt->priv->toplevel_dir); |
| info.fn = collect_merge_info_callback; |
| info.data = opt; |
| info.show_all_errors = 1; |
| |
| parse_tree(merge_base); |
| parse_tree(side1); |
| parse_tree(side2); |
| init_tree_desc(t + 0, merge_base->buffer, merge_base->size); |
| init_tree_desc(t + 1, side1->buffer, side1->size); |
| init_tree_desc(t + 2, side2->buffer, side2->size); |
| |
| trace2_region_enter("merge", "traverse_trees", opt->repo); |
| ret = traverse_trees(NULL, 3, t, &info); |
| if (ret == 0) |
| ret = handle_deferred_entries(opt, &info); |
| trace2_region_leave("merge", "traverse_trees", opt->repo); |
| |
| return ret; |
| } |
| |
| /*** Function Grouping: functions related to threeway content merges ***/ |
| |
| static int find_first_merges(struct repository *repo, |
| const char *path, |
| struct commit *a, |
| struct commit *b, |
| struct object_array *result) |
| { |
| int i, j; |
| struct object_array merges = OBJECT_ARRAY_INIT; |
| struct commit *commit; |
| int contains_another; |
| |
| char merged_revision[GIT_MAX_HEXSZ + 2]; |
| const char *rev_args[] = { "rev-list", "--merges", "--ancestry-path", |
| "--all", merged_revision, NULL }; |
| struct rev_info revs; |
| struct setup_revision_opt rev_opts; |
| |
| memset(result, 0, sizeof(struct object_array)); |
| memset(&rev_opts, 0, sizeof(rev_opts)); |
| |
| /* get all revisions that merge commit a */ |
| xsnprintf(merged_revision, sizeof(merged_revision), "^%s", |
| oid_to_hex(&a->object.oid)); |
| repo_init_revisions(repo, &revs, NULL); |
| /* FIXME: can't handle linked worktrees in submodules yet */ |
| revs.single_worktree = path != NULL; |
| setup_revisions(ARRAY_SIZE(rev_args)-1, rev_args, &revs, &rev_opts); |
| |
| /* save all revisions from the above list that contain b */ |
| if (prepare_revision_walk(&revs)) |
| die("revision walk setup failed"); |
| while ((commit = get_revision(&revs)) != NULL) { |
| struct object *o = &(commit->object); |
| if (repo_in_merge_bases(repo, b, commit)) |
| add_object_array(o, NULL, &merges); |
| } |
| reset_revision_walk(); |
| |
| /* Now we've got all merges that contain a and b. Prune all |
| * merges that contain another found merge and save them in |
| * result. |
| */ |
| for (i = 0; i < merges.nr; i++) { |
| struct commit *m1 = (struct commit *) merges.objects[i].item; |
| |
| contains_another = 0; |
| for (j = 0; j < merges.nr; j++) { |
| struct commit *m2 = (struct commit *) merges.objects[j].item; |
| if (i != j && repo_in_merge_bases(repo, m2, m1)) { |
| contains_another = 1; |
| break; |
| } |
| } |
| |
| if (!contains_another) |
| add_object_array(merges.objects[i].item, NULL, result); |
| } |
| |
| object_array_clear(&merges); |
| release_revisions(&revs); |
| return result->nr; |
| } |
| |
| static int merge_submodule(struct merge_options *opt, |
| const char *path, |
| const struct object_id *o, |
| const struct object_id *a, |
| const struct object_id *b, |
| struct object_id *result) |
| { |
| struct repository subrepo; |
| struct strbuf sb = STRBUF_INIT; |
| int ret = 0; |
| struct commit *commit_o, *commit_a, *commit_b; |
| int parent_count; |
| struct object_array merges; |
| |
| int i; |
| int search = !opt->priv->call_depth; |
| |
| /* store fallback answer in result in case we fail */ |
| oidcpy(result, opt->priv->call_depth ? o : a); |
| |
| /* we can not handle deletion conflicts */ |
| if (is_null_oid(o)) |
| return 0; |
| if (is_null_oid(a)) |
| return 0; |
| if (is_null_oid(b)) |
| return 0; |
| |
| if (repo_submodule_init(&subrepo, opt->repo, path, null_oid())) { |
| path_msg(opt, path, 0, |
| _("Failed to merge submodule %s (not checked out)"), |
| path); |
| return 0; |
| } |
| |
| if (!(commit_o = lookup_commit_reference(&subrepo, o)) || |
| !(commit_a = lookup_commit_reference(&subrepo, a)) || |
| !(commit_b = lookup_commit_reference(&subrepo, b))) { |
| path_msg(opt, path, 0, |
| _("Failed to merge submodule %s (commits not present)"), |
| path); |
| goto cleanup; |
| } |
| |
| /* check whether both changes are forward */ |
| if (!repo_in_merge_bases(&subrepo, commit_o, commit_a) || |
| !repo_in_merge_bases(&subrepo, commit_o, commit_b)) { |
| path_msg(opt, path, 0, |
| _("Failed to merge submodule %s " |
| "(commits don't follow merge-base)"), |
| path); |
| goto cleanup; |
| } |
| |
| /* Case #1: a is contained in b or vice versa */ |
| if (repo_in_merge_bases(&subrepo, commit_a, commit_b)) { |
| oidcpy(result, b); |
| path_msg(opt, path, 1, |
| _("Note: Fast-forwarding submodule %s to %s"), |
| path, oid_to_hex(b)); |
| ret = 1; |
| goto cleanup; |
| } |
| if (repo_in_merge_bases(&subrepo, commit_b, commit_a)) { |
| oidcpy(result, a); |
| path_msg(opt, path, 1, |
| _("Note: Fast-forwarding submodule %s to %s"), |
| path, oid_to_hex(a)); |
| ret = 1; |
| goto cleanup; |
| } |
| |
| /* |
| * Case #2: There are one or more merges that contain a and b in |
| * the submodule. If there is only one, then present it as a |
| * suggestion to the user, but leave it marked unmerged so the |
| * user needs to confirm the resolution. |
| */ |
| |
| /* Skip the search if makes no sense to the calling context. */ |
| if (!search) |
| goto cleanup; |
| |
| /* find commit which merges them */ |
| parent_count = find_first_merges(&subrepo, path, commit_a, commit_b, |
| &merges); |
| switch (parent_count) { |
| case 0: |
| path_msg(opt, path, 0, _("Failed to merge submodule %s"), path); |
| break; |
| |
| case 1: |
| format_commit(&sb, 4, &subrepo, |
| (struct commit *)merges.objects[0].item); |
| path_msg(opt, path, 0, |
| _("Failed to merge submodule %s, but a possible merge " |
| "resolution exists:\n%s\n"), |
| path, sb.buf); |
| path_msg(opt, path, 1, |
| _("If this is correct simply add it to the index " |
| "for example\n" |
| "by using:\n\n" |
| " git update-index --cacheinfo 160000 %s \"%s\"\n\n" |
| "which will accept this suggestion.\n"), |
| oid_to_hex(&merges.objects[0].item->oid), path); |
| strbuf_release(&sb); |
| break; |
| default: |
| for (i = 0; i < merges.nr; i++) |
| format_commit(&sb, 4, &subrepo, |
| (struct commit *)merges.objects[i].item); |
| path_msg(opt, path, 0, |
| _("Failed to merge submodule %s, but multiple " |
| "possible merges exist:\n%s"), path, sb.buf); |
| strbuf_release(&sb); |
| } |
| |
| object_array_clear(&merges); |
| cleanup: |
| repo_clear(&subrepo); |
| return ret; |
| } |
| |
| static void initialize_attr_index(struct merge_options *opt) |
| { |
| /* |
| * The renormalize_buffer() functions require attributes, and |
| * annoyingly those can only be read from the working tree or from |
| * an index_state. merge-ort doesn't have an index_state, so we |
| * generate a fake one containing only attribute information. |
| */ |
| struct merged_info *mi; |
| struct index_state *attr_index = &opt->priv->attr_index; |
| struct cache_entry *ce; |
| |
| attr_index->initialized = 1; |
| |
| if (!opt->renormalize) |
| return; |
| |
| mi = strmap_get(&opt->priv->paths, GITATTRIBUTES_FILE); |
| if (!mi) |
| return; |
| |
| if (mi->clean) { |
| int len = strlen(GITATTRIBUTES_FILE); |
| ce = make_empty_cache_entry(attr_index, len); |
| ce->ce_mode = create_ce_mode(mi->result.mode); |
| ce->ce_flags = create_ce_flags(0); |
| ce->ce_namelen = len; |
| oidcpy(&ce->oid, &mi->result.oid); |
| memcpy(ce->name, GITATTRIBUTES_FILE, len); |
| add_index_entry(attr_index, ce, |
| ADD_CACHE_OK_TO_ADD | ADD_CACHE_OK_TO_REPLACE); |
| get_stream_filter(attr_index, GITATTRIBUTES_FILE, &ce->oid); |
| } else { |
| int stage, len; |
| struct conflict_info *ci; |
| |
| ASSIGN_AND_VERIFY_CI(ci, mi); |
| for (stage = 0; stage < 3; stage++) { |
| unsigned stage_mask = (1 << stage); |
| |
| if (!(ci->filemask & stage_mask)) |
| continue; |
| len = strlen(GITATTRIBUTES_FILE); |
| ce = make_empty_cache_entry(attr_index, len); |
| ce->ce_mode = create_ce_mode(ci->stages[stage].mode); |
| ce->ce_flags = create_ce_flags(stage); |
| ce->ce_namelen = len; |
| oidcpy(&ce->oid, &ci->stages[stage].oid); |
| memcpy(ce->name, GITATTRIBUTES_FILE, len); |
| add_index_entry(attr_index, ce, |
| ADD_CACHE_OK_TO_ADD | ADD_CACHE_OK_TO_REPLACE); |
| get_stream_filter(attr_index, GITATTRIBUTES_FILE, |
| &ce->oid); |
| } |
| } |
| } |
| |
| static int merge_3way(struct merge_options *opt, |
| const char *path, |
| const struct object_id *o, |
| const struct object_id *a, |
| const struct object_id *b, |
| const char *pathnames[3], |
| const int extra_marker_size, |
| mmbuffer_t *result_buf) |
| { |
| mmfile_t orig, src1, src2; |
| struct ll_merge_options ll_opts = {0}; |
| char *base, *name1, *name2; |
| enum ll_merge_result merge_status; |
| |
| if (!opt->priv->attr_index.initialized) |
| initialize_attr_index(opt); |
| |
| ll_opts.renormalize = opt->renormalize; |
| ll_opts.extra_marker_size = extra_marker_size; |
| ll_opts.xdl_opts = opt->xdl_opts; |
| |
| if (opt->priv->call_depth) { |
| ll_opts.virtual_ancestor = 1; |
| ll_opts.variant = 0; |
| } else { |
| switch (opt->recursive_variant) { |
| case MERGE_VARIANT_OURS: |
| ll_opts.variant = XDL_MERGE_FAVOR_OURS; |
| break; |
| case MERGE_VARIANT_THEIRS: |
| ll_opts.variant = XDL_MERGE_FAVOR_THEIRS; |
| break; |
| default: |
| ll_opts.variant = 0; |
| break; |
| } |
| } |
| |
| assert(pathnames[0] && pathnames[1] && pathnames[2] && opt->ancestor); |
| if (pathnames[0] == pathnames[1] && pathnames[1] == pathnames[2]) { |
| base = mkpathdup("%s", opt->ancestor); |
| name1 = mkpathdup("%s", opt->branch1); |
| name2 = mkpathdup("%s", opt->branch2); |
| } else { |
| base = mkpathdup("%s:%s", opt->ancestor, pathnames[0]); |
| name1 = mkpathdup("%s:%s", opt->branch1, pathnames[1]); |
| name2 = mkpathdup("%s:%s", opt->branch2, pathnames[2]); |
| } |
| |
| read_mmblob(&orig, o); |
| read_mmblob(&src1, a); |
| read_mmblob(&src2, b); |
| |
| merge_status = ll_merge(result_buf, path, &orig, base, |
| &src1, name1, &src2, name2, |
| &opt->priv->attr_index, &ll_opts); |
| if (merge_status == LL_MERGE_BINARY_CONFLICT) |
| path_msg(opt, path, 0, |
| "warning: Cannot merge binary files: %s (%s vs. %s)", |
| path, name1, name2); |
| |
| free(base); |
| free(name1); |
| free(name2); |
| free(orig.ptr); |
| free(src1.ptr); |
| free(src2.ptr); |
| return merge_status; |
| } |
| |
| static int handle_content_merge(struct merge_options *opt, |
| const char *path, |
| const struct version_info *o, |
| const struct version_info *a, |
| const struct version_info *b, |
| const char *pathnames[3], |
| const int extra_marker_size, |
| struct version_info *result) |
| { |
| /* |
| * path is the target location where we want to put the file, and |
| * is used to determine any normalization rules in ll_merge. |
| * |
| * The normal case is that path and all entries in pathnames are |
| * identical, though renames can affect which path we got one of |
| * the three blobs to merge on various sides of history. |
| * |
| * extra_marker_size is the amount to extend conflict markers in |
| * ll_merge; this is neeed if we have content merges of content |
| * merges, which happens for example with rename/rename(2to1) and |
| * rename/add conflicts. |
| */ |
| unsigned clean = 1; |
| |
| /* |
| * handle_content_merge() needs both files to be of the same type, i.e. |
| * both files OR both submodules OR both symlinks. Conflicting types |
| * needs to be handled elsewhere. |
| */ |
| assert((S_IFMT & a->mode) == (S_IFMT & b->mode)); |
| |
| /* Merge modes */ |
| if (a->mode == b->mode || a->mode == o->mode) |
| result->mode = b->mode; |
| else { |
| /* must be the 100644/100755 case */ |
| assert(S_ISREG(a->mode)); |
| result->mode = a->mode; |
| clean = (b->mode == o->mode); |
| /* |
| * FIXME: If opt->priv->call_depth && !clean, then we really |
| * should not make result->mode match either a->mode or |
| * b->mode; that causes t6036 "check conflicting mode for |
| * regular file" to fail. It would be best to use some other |
| * mode, but we'll confuse all kinds of stuff if we use one |
| * where S_ISREG(result->mode) isn't true, and if we use |
| * something like 0100666, then tree-walk.c's calls to |
| * canon_mode() will just normalize that to 100644 for us and |
| * thus not solve anything. |
| * |
| * Figure out if there's some kind of way we can work around |
| * this... |
| */ |
| } |
| |
| /* |
| * Trivial oid merge. |
| * |
| * Note: While one might assume that the next four lines would |
| * be unnecessary due to the fact that match_mask is often |
| * setup and already handled, renames don't always take care |
| * of that. |
| */ |
| if (oideq(&a->oid, &b->oid) || oideq(&a->oid, &o->oid)) |
| oidcpy(&result->oid, &b->oid); |
| else if (oideq(&b->oid, &o->oid)) |
| oidcpy(&result->oid, &a->oid); |
| |
| /* Remaining rules depend on file vs. submodule vs. symlink. */ |
| else if (S_ISREG(a->mode)) { |
| mmbuffer_t result_buf; |
| int ret = 0, merge_status; |
| int two_way; |
| |
| /* |
| * If 'o' is different type, treat it as null so we do a |
| * two-way merge. |
| */ |
| two_way = ((S_IFMT & o->mode) != (S_IFMT & a->mode)); |
| |
| merge_status = merge_3way(opt, path, |
| two_way ? null_oid() : &o->oid, |
| &a->oid, &b->oid, |
| pathnames, extra_marker_size, |
| &result_buf); |
| |
| if ((merge_status < 0) || !result_buf.ptr) |
| ret = err(opt, _("Failed to execute internal merge")); |
| |
| if (!ret && |
| write_object_file(result_buf.ptr, result_buf.size, |
| OBJ_BLOB, &result->oid)) |
| ret = err(opt, _("Unable to add %s to database"), |
| path); |
| |
| free(result_buf.ptr); |
| if (ret) |
| return -1; |
| clean &= (merge_status == 0); |
| path_msg(opt, path, 1, _("Auto-merging %s"), path); |
| } else if (S_ISGITLINK(a->mode)) { |
| int two_way = ((S_IFMT & o->mode) != (S_IFMT & a->mode)); |
| clean = merge_submodule(opt, pathnames[0], |
| two_way ? null_oid() : &o->oid, |
| &a->oid, &b->oid, &result->oid); |
| if (opt->priv->call_depth && two_way && !clean) { |
| result->mode = o->mode; |
| oidcpy(&result->oid, &o->oid); |
| } |
| } else if (S_ISLNK(a->mode)) { |
| if (opt->priv->call_depth) { |
| clean = 0; |
| result->mode = o->mode; |
| oidcpy(&result->oid, &o->oid); |
| } else { |
| switch (opt->recursive_variant) { |
| case MERGE_VARIANT_NORMAL: |
| clean = 0; |
| oidcpy(&result->oid, &a->oid); |
| break; |
| case MERGE_VARIANT_OURS: |
| oidcpy(&result->oid, &a->oid); |
| break; |
| case MERGE_VARIANT_THEIRS: |
| oidcpy(&result->oid, &b->oid); |
| break; |
| } |
| } |
| } else |
| BUG("unsupported object type in the tree: %06o for %s", |
| a->mode, path); |
| |
| return clean; |
| } |
| |
| /*** Function Grouping: functions related to detect_and_process_renames(), *** |
| *** which are split into directory and regular rename detection sections. ***/ |
| |
| /*** Function Grouping: functions related to directory rename detection ***/ |
| |
| struct collision_info { |
| struct string_list source_files; |
| unsigned reported_already:1; |
| }; |
| |
| /* |
| * Return a new string that replaces the beginning portion (which matches |
| * rename_info->key), with rename_info->util.new_dir. In perl-speak: |
| * new_path_name = (old_path =~ s/rename_info->key/rename_info->value/); |
| * NOTE: |
| * Caller must ensure that old_path starts with rename_info->key + '/'. |
| */ |
| static char *apply_dir_rename(struct strmap_entry *rename_info, |
| const char *old_path) |
| { |
| struct strbuf new_path = STRBUF_INIT; |
| const char *old_dir = rename_info->key; |
| const char *new_dir = rename_info->value; |
| int oldlen, newlen, new_dir_len; |
| |
| oldlen = strlen(old_dir); |
| if (*new_dir == '\0') |
| /* |
| * If someone renamed/merged a subdirectory into the root |
| * directory (e.g. 'some/subdir' -> ''), then we want to |
| * avoid returning |
| * '' + '/filename' |
| * as the rename; we need to make old_path + oldlen advance |
| * past the '/' character. |
| */ |
| oldlen++; |
| new_dir_len = strlen(new_dir); |
| newlen = new_dir_len + (strlen(old_path) - oldlen) + 1; |
| strbuf_grow(&new_path, newlen); |
| strbuf_add(&new_path, new_dir, new_dir_len); |
| strbuf_addstr(&new_path, &old_path[oldlen]); |
| |
| return strbuf_detach(&new_path, NULL); |
| } |
| |
| static int path_in_way(struct strmap *paths, const char *path, unsigned side_mask) |
| { |
| struct merged_info *mi = strmap_get(paths, path); |
| struct conflict_info *ci; |
| if (!mi) |
| return 0; |
| INITIALIZE_CI(ci, mi); |
| return mi->clean || (side_mask & (ci->filemask | ci->dirmask)); |
| } |
| |
| /* |
| * See if there is a directory rename for path, and if there are any file |
| * level conflicts on the given side for the renamed location. If there is |
| * a rename and there are no conflicts, return the new name. Otherwise, |
| * return NULL. |
| */ |
| static char *handle_path_level_conflicts(struct merge_options *opt, |
| const char *path, |
| unsigned side_index, |
| struct strmap_entry *rename_info, |
| struct strmap *collisions) |
| { |
| char *new_path = NULL; |
| struct collision_info *c_info; |
| int clean = 1; |
| struct strbuf collision_paths = STRBUF_INIT; |
| |
| /* |
| * entry has the mapping of old directory name to new directory name |
| * that we want to apply to path. |
| */ |
| new_path = apply_dir_rename(rename_info, path); |
| if (!new_path) |
| BUG("Failed to apply directory rename!"); |
| |
| /* |
| * The caller needs to have ensured that it has pre-populated |
| * collisions with all paths that map to new_path. Do a quick check |
| * to ensure that's the case. |
| */ |
| c_info = strmap_get(collisions, new_path); |
| if (!c_info) |
| BUG("c_info is NULL"); |
| |
| /* |
| * Check for one-sided add/add/.../add conflicts, i.e. |
| * where implicit renames from the other side doing |
| * directory rename(s) can affect this side of history |
| * to put multiple paths into the same location. Warn |
| * and bail on directory renames for such paths. |
| */ |
| if (c_info->reported_already) { |
| clean = 0; |
| } else if (path_in_way(&opt->priv->paths, new_path, 1 << side_index)) { |
| c_info->reported_already = 1; |
| strbuf_add_separated_string_list(&collision_paths, ", ", |
| &c_info->source_files); |
| path_msg(opt, new_path, 0, |
| _("CONFLICT (implicit dir rename): Existing file/dir " |
| "at %s in the way of implicit directory rename(s) " |
| "putting the following path(s) there: %s."), |
| new_path, collision_paths.buf); |
| clean = 0; |
| } else if (c_info->source_files.nr > 1) { |
| c_info->reported_already = 1; |
| strbuf_add_separated_string_list(&collision_paths, ", ", |
| &c_info->source_files); |
| path_msg(opt, new_path, 0, |
| _("CONFLICT (implicit dir rename): Cannot map more " |
| "than one path to %s; implicit directory renames " |
| "tried to put these paths there: %s"), |
| new_path, collision_paths.buf); |
| clean = 0; |
| } |
| |
| /* Free memory we no longer need */ |
| strbuf_release(&collision_paths); |
| if (!clean && new_path) { |
| free(new_path); |
| return NULL; |
| } |
| |
| return new_path; |
| } |
| |
| static void get_provisional_directory_renames(struct merge_options *opt, |
| unsigned side, |
| int *clean) |
| { |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| struct rename_info *renames = &opt->priv->renames; |
| |
| /* |
| * Collapse |
| * dir_rename_count: old_directory -> {new_directory -> count} |
| * down to |
| * dir_renames: old_directory -> best_new_directory |
| * where best_new_directory is the one with the unique highest count. |
| */ |
| strmap_for_each_entry(&renames->dir_rename_count[side], &iter, entry) { |
| const char *source_dir = entry->key; |
| struct strintmap *counts = entry->value; |
| struct hashmap_iter count_iter; |
| struct strmap_entry *count_entry; |
| int max = 0; |
| int bad_max = 0; |
| const char *best = NULL; |
| |
| strintmap_for_each_entry(counts, &count_iter, count_entry) { |
| const char *target_dir = count_entry->key; |
| intptr_t count = (intptr_t)count_entry->value; |
| |
| if (count == max) |
| bad_max = max; |
| else if (count > max) { |
| max = count; |
| best = target_dir; |
| } |
| } |
| |
| if (max == 0) |
| continue; |
| |
| if (bad_max == max) { |
| path_msg(opt, source_dir, 0, |
| _("CONFLICT (directory rename split): " |
| "Unclear where to rename %s to; it was " |
| "renamed to multiple other directories, with " |
| "no destination getting a majority of the " |
| "files."), |
| source_dir); |
| *clean = 0; |
| } else { |
| strmap_put(&renames->dir_renames[side], |
| source_dir, (void*)best); |
| } |
| } |
| } |
| |
| static void handle_directory_level_conflicts(struct merge_options *opt) |
| { |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| struct string_list duplicated = STRING_LIST_INIT_NODUP; |
| struct rename_info *renames = &opt->priv->renames; |
| struct strmap *side1_dir_renames = &renames->dir_renames[MERGE_SIDE1]; |
| struct strmap *side2_dir_renames = &renames->dir_renames[MERGE_SIDE2]; |
| int i; |
| |
| strmap_for_each_entry(side1_dir_renames, &iter, entry) { |
| if (strmap_contains(side2_dir_renames, entry->key)) |
| string_list_append(&duplicated, entry->key); |
| } |
| |
| for (i = 0; i < duplicated.nr; i++) { |
| strmap_remove(side1_dir_renames, duplicated.items[i].string, 0); |
| strmap_remove(side2_dir_renames, duplicated.items[i].string, 0); |
| } |
| string_list_clear(&duplicated, 0); |
| } |
| |
| static struct strmap_entry *check_dir_renamed(const char *path, |
| struct strmap *dir_renames) |
| { |
| char *temp = xstrdup(path); |
| char *end; |
| struct strmap_entry *e = NULL; |
| |
| while ((end = strrchr(temp, '/'))) { |
| *end = '\0'; |
| e = strmap_get_entry(dir_renames, temp); |
| if (e) |
| break; |
| } |
| free(temp); |
| return e; |
| } |
| |
| static void compute_collisions(struct strmap *collisions, |
| struct strmap *dir_renames, |
| struct diff_queue_struct *pairs) |
| { |
| int i; |
| |
| strmap_init_with_options(collisions, NULL, 0); |
| if (strmap_empty(dir_renames)) |
| return; |
| |
| /* |
| * Multiple files can be mapped to the same path due to directory |
| * renames done by the other side of history. Since that other |
| * side of history could have merged multiple directories into one, |
| * if our side of history added the same file basename to each of |
| * those directories, then all N of them would get implicitly |
| * renamed by the directory rename detection into the same path, |
| * and we'd get an add/add/.../add conflict, and all those adds |
| * from *this* side of history. This is not representable in the |
| * index, and users aren't going to easily be able to make sense of |
| * it. So we need to provide a good warning about what's |
| * happening, and fall back to no-directory-rename detection |
| * behavior for those paths. |
| * |
| * See testcases 9e and all of section 5 from t6043 for examples. |
| */ |
| for (i = 0; i < pairs->nr; ++i) { |
| struct strmap_entry *rename_info; |
| struct collision_info *collision_info; |
| char *new_path; |
| struct diff_filepair *pair = pairs->queue[i]; |
| |
| if (pair->status != 'A' && pair->status != 'R') |
| continue; |
| rename_info = check_dir_renamed(pair->two->path, dir_renames); |
| if (!rename_info) |
| continue; |
| |
| new_path = apply_dir_rename(rename_info, pair->two->path); |
| assert(new_path); |
| collision_info = strmap_get(collisions, new_path); |
| if (collision_info) { |
| free(new_path); |
| } else { |
| CALLOC_ARRAY(collision_info, 1); |
| string_list_init_nodup(&collision_info->source_files); |
| strmap_put(collisions, new_path, collision_info); |
| } |
| string_list_insert(&collision_info->source_files, |
| pair->two->path); |
| } |
| } |
| |
| static char *check_for_directory_rename(struct merge_options *opt, |
| const char *path, |
| unsigned side_index, |
| struct strmap *dir_renames, |
| struct strmap *dir_rename_exclusions, |
| struct strmap *collisions, |
| int *clean_merge) |
| { |
| char *new_path = NULL; |
| struct strmap_entry *rename_info; |
| struct strmap_entry *otherinfo = NULL; |
| const char *new_dir; |
| |
| if (strmap_empty(dir_renames)) |
| return new_path; |
| rename_info = check_dir_renamed(path, dir_renames); |
| if (!rename_info) |
| return new_path; |
| /* old_dir = rename_info->key; */ |
| new_dir = rename_info->value; |
| |
| /* |
| * This next part is a little weird. We do not want to do an |
| * implicit rename into a directory we renamed on our side, because |
| * that will result in a spurious rename/rename(1to2) conflict. An |
| * example: |
| * Base commit: dumbdir/afile, otherdir/bfile |
| * Side 1: smrtdir/afile, otherdir/bfile |
| * Side 2: dumbdir/afile, dumbdir/bfile |
| * Here, while working on Side 1, we could notice that otherdir was |
| * renamed/merged to dumbdir, and change the diff_filepair for |
| * otherdir/bfile into a rename into dumbdir/bfile. However, Side |
| * 2 will notice the rename from dumbdir to smrtdir, and do the |
| * transitive rename to move it from dumbdir/bfile to |
| * smrtdir/bfile. That gives us bfile in dumbdir vs being in |
| * smrtdir, a rename/rename(1to2) conflict. We really just want |
| * the file to end up in smrtdir. And the way to achieve that is |
| * to not let Side1 do the rename to dumbdir, since we know that is |
| * the source of one of our directory renames. |
| * |
| * That's why otherinfo and dir_rename_exclusions is here. |
| * |
| * As it turns out, this also prevents N-way transient rename |
| * confusion; See testcases 9c and 9d of t6043. |
| */ |
| otherinfo = strmap_get_entry(dir_rename_exclusions, new_dir); |
| if (otherinfo) { |
| path_msg(opt, rename_info->key, 1, |
| _("WARNING: Avoiding applying %s -> %s rename " |
| "to %s, because %s itself was renamed."), |
| rename_info->key, new_dir, path, new_dir); |
| return NULL; |
| } |
| |
| new_path = handle_path_level_conflicts(opt, path, side_index, |
| rename_info, collisions); |
| *clean_merge &= (new_path != NULL); |
| |
| return new_path; |
| } |
| |
| static void apply_directory_rename_modifications(struct merge_options *opt, |
| struct diff_filepair *pair, |
| char *new_path) |
| { |
| /* |
| * The basic idea is to get the conflict_info from opt->priv->paths |
| * at old path, and insert it into new_path; basically just this: |
| * ci = strmap_get(&opt->priv->paths, old_path); |
| * strmap_remove(&opt->priv->paths, old_path, 0); |
| * strmap_put(&opt->priv->paths, new_path, ci); |
| * However, there are some factors complicating this: |
| * - opt->priv->paths may already have an entry at new_path |
| * - Each ci tracks its containing directory, so we need to |
| * update that |
| * - If another ci has the same containing directory, then |
| * the two char*'s MUST point to the same location. See the |
| * comment in struct merged_info. strcmp equality is not |
| * enough; we need pointer equality. |
| * - opt->priv->paths must hold the parent directories of any |
| * entries that are added. So, if this directory rename |
| * causes entirely new directories, we must recursively add |
| * parent directories. |
| * - For each parent directory added to opt->priv->paths, we |
| * also need to get its parent directory stored in its |
| * conflict_info->merged.directory_name with all the same |
| * requirements about pointer equality. |
| */ |
| struct string_list dirs_to_insert = STRING_LIST_INIT_NODUP; |
| struct conflict_info *ci, *new_ci; |
| struct strmap_entry *entry; |
| const char *branch_with_new_path, *branch_with_dir_rename; |
| const char *old_path = pair->two->path; |
| const char *parent_name; |
| const char *cur_path; |
| int i, len; |
| |
| entry = strmap_get_entry(&opt->priv->paths, old_path); |
| old_path = entry->key; |
| ci = entry->value; |
| VERIFY_CI(ci); |
| |
| /* Find parent directories missing from opt->priv->paths */ |
| cur_path = mem_pool_strdup(&opt->priv->pool, new_path); |
| free((char*)new_path); |
| new_path = (char *)cur_path; |
| |
| while (1) { |
| /* Find the parent directory of cur_path */ |
| char *last_slash = strrchr(cur_path, '/'); |
| if (last_slash) { |
| parent_name = mem_pool_strndup(&opt->priv->pool, |
| cur_path, |
| last_slash - cur_path); |
| } else { |
| parent_name = opt->priv->toplevel_dir; |
| break; |
| } |
| |
| /* Look it up in opt->priv->paths */ |
| entry = strmap_get_entry(&opt->priv->paths, parent_name); |
| if (entry) { |
| parent_name = entry->key; /* reuse known pointer */ |
| break; |
| } |
| |
| /* Record this is one of the directories we need to insert */ |
| string_list_append(&dirs_to_insert, parent_name); |
| cur_path = parent_name; |
| } |
| |
| /* Traverse dirs_to_insert and insert them into opt->priv->paths */ |
| for (i = dirs_to_insert.nr-1; i >= 0; --i) { |
| struct conflict_info *dir_ci; |
| char *cur_dir = dirs_to_insert.items[i].string; |
| |
| CALLOC_ARRAY(dir_ci, 1); |
| |
| dir_ci->merged.directory_name = parent_name; |
| len = strlen(parent_name); |
| /* len+1 because of trailing '/' character */ |
| dir_ci->merged.basename_offset = (len > 0 ? len+1 : len); |
| dir_ci->dirmask = ci->filemask; |
| strmap_put(&opt->priv->paths, cur_dir, dir_ci); |
| |
| parent_name = cur_dir; |
| } |
| |
| assert(ci->filemask == 2 || ci->filemask == 4); |
| assert(ci->dirmask == 0); |
| strmap_remove(&opt->priv->paths, old_path, 0); |
| |
| branch_with_new_path = (ci->filemask == 2) ? opt->branch1 : opt->branch2; |
| branch_with_dir_rename = (ci->filemask == 2) ? opt->branch2 : opt->branch1; |
| |
| /* Now, finally update ci and stick it into opt->priv->paths */ |
| ci->merged.directory_name = parent_name; |
| len = strlen(parent_name); |
| ci->merged.basename_offset = (len > 0 ? len+1 : len); |
| new_ci = strmap_get(&opt->priv->paths, new_path); |
| if (!new_ci) { |
| /* Place ci back into opt->priv->paths, but at new_path */ |
| strmap_put(&opt->priv->paths, new_path, ci); |
| } else { |
| int index; |
| |
| /* A few sanity checks */ |
| VERIFY_CI(new_ci); |
| assert(ci->filemask == 2 || ci->filemask == 4); |
| assert((new_ci->filemask & ci->filemask) == 0); |
| assert(!new_ci->merged.clean); |
| |
| /* Copy stuff from ci into new_ci */ |
| new_ci->filemask |= ci->filemask; |
| if (new_ci->dirmask) |
| new_ci->df_conflict = 1; |
| index = (ci->filemask >> 1); |
| new_ci->pathnames[index] = ci->pathnames[index]; |
| new_ci->stages[index].mode = ci->stages[index].mode; |
| oidcpy(&new_ci->stages[index].oid, &ci->stages[index].oid); |
| |
| ci = new_ci; |
| } |
| |
| if (opt->detect_directory_renames == MERGE_DIRECTORY_RENAMES_TRUE) { |
| /* Notify user of updated path */ |
| if (pair->status == 'A') |
| path_msg(opt, new_path, 1, |
| _("Path updated: %s added in %s inside a " |
| "directory that was renamed in %s; moving " |
| "it to %s."), |
| old_path, branch_with_new_path, |
| branch_with_dir_rename, new_path); |
| else |
| path_msg(opt, new_path, 1, |
| _("Path updated: %s renamed to %s in %s, " |
| "inside a directory that was renamed in %s; " |
| "moving it to %s."), |
| pair->one->path, old_path, branch_with_new_path, |
| branch_with_dir_rename, new_path); |
| } else { |
| /* |
| * opt->detect_directory_renames has the value |
| * MERGE_DIRECTORY_RENAMES_CONFLICT, so mark these as conflicts. |
| */ |
| ci->path_conflict = 1; |
| if (pair->status == 'A') |
| path_msg(opt, new_path, 1, |
| _("CONFLICT (file location): %s added in %s " |
| "inside a directory that was renamed in %s, " |
| "suggesting it should perhaps be moved to " |
| "%s."), |
| old_path, branch_with_new_path, |
| branch_with_dir_rename, new_path); |
| else |
| path_msg(opt, new_path, 1, |
| _("CONFLICT (file location): %s renamed to %s " |
| "in %s, inside a directory that was renamed " |
| "in %s, suggesting it should perhaps be " |
| "moved to %s."), |
| pair->one->path, old_path, branch_with_new_path, |
| branch_with_dir_rename, new_path); |
| } |
| |
| /* |
| * Finally, record the new location. |
| */ |
| pair->two->path = new_path; |
| } |
| |
| /*** Function Grouping: functions related to regular rename detection ***/ |
| |
| static int process_renames(struct merge_options *opt, |
| struct diff_queue_struct *renames) |
| { |
| int clean_merge = 1, i; |
| |
| for (i = 0; i < renames->nr; ++i) { |
| const char *oldpath = NULL, *newpath; |
| struct diff_filepair *pair = renames->queue[i]; |
| struct conflict_info *oldinfo = NULL, *newinfo = NULL; |
| struct strmap_entry *old_ent, *new_ent; |
| unsigned int old_sidemask; |
| int target_index, other_source_index; |
| int source_deleted, collision, type_changed; |
| const char *rename_branch = NULL, *delete_branch = NULL; |
| |
| old_ent = strmap_get_entry(&opt->priv->paths, pair->one->path); |
| new_ent = strmap_get_entry(&opt->priv->paths, pair->two->path); |
| if (old_ent) { |
| oldpath = old_ent->key; |
| oldinfo = old_ent->value; |
| } |
| newpath = pair->two->path; |
| if (new_ent) { |
| newpath = new_ent->key; |
| newinfo = new_ent->value; |
| } |
| |
| /* |
| * If pair->one->path isn't in opt->priv->paths, that means |
| * that either directory rename detection removed that |
| * path, or a parent directory of oldpath was resolved and |
| * we don't even need the rename; in either case, we can |
| * skip it. If oldinfo->merged.clean, then the other side |
| * of history had no changes to oldpath and we don't need |
| * the rename and can skip it. |
| */ |
| if (!oldinfo || oldinfo->merged.clean) |
| continue; |
| |
| /* |
| * diff_filepairs have copies of pathnames, thus we have to |
| * use standard 'strcmp()' (negated) instead of '=='. |
| */ |
| if (i + 1 < renames->nr && |
| !strcmp(oldpath, renames->queue[i+1]->one->path)) { |
| /* Handle rename/rename(1to2) or rename/rename(1to1) */ |
| const char *pathnames[3]; |
| struct version_info merged; |
| struct conflict_info *base, *side1, *side2; |
| unsigned was_binary_blob = 0; |
| |
| pathnames[0] = oldpath; |
| pathnames[1] = newpath; |
| pathnames[2] = renames->queue[i+1]->two->path; |
| |
| base = strmap_get(&opt->priv->paths, pathnames[0]); |
| side1 = strmap_get(&opt->priv->paths, pathnames[1]); |
| side2 = strmap_get(&opt->priv->paths, pathnames[2]); |
| |
| VERIFY_CI(base); |
| VERIFY_CI(side1); |
| VERIFY_CI(side2); |
| |
| if (!strcmp(pathnames[1], pathnames[2])) { |
| struct rename_info *ri = &opt->priv->renames; |
| int j; |
| |
| /* Both sides renamed the same way */ |
| assert(side1 == side2); |
| memcpy(&side1->stages[0], &base->stages[0], |
| sizeof(merged)); |
| side1->filemask |= (1 << MERGE_BASE); |
| /* Mark base as resolved by removal */ |
| base->merged.is_null = 1; |
| base->merged.clean = 1; |
| |
| /* |
| * Disable remembering renames optimization; |
| * rename/rename(1to1) is incredibly rare, and |
| * just disabling the optimization is easier |
| * than purging cached_pairs, |
| * cached_target_names, and dir_rename_counts. |
| */ |
| for (j = 0; j < 3; j++) |
| ri->merge_trees[j] = NULL; |
| |
| /* We handled both renames, i.e. i+1 handled */ |
| i++; |
| /* Move to next rename */ |
| continue; |
| } |
| |
| /* This is a rename/rename(1to2) */ |
| clean_merge = handle_content_merge(opt, |
| pair->one->path, |
| &base->stages[0], |
| &side1->stages[1], |
| &side2->stages[2], |
| pathnames, |
| 1 + 2 * opt->priv->call_depth, |
| &merged); |
| if (!clean_merge && |
| merged.mode == side1->stages[1].mode && |
| oideq(&merged.oid, &side1->stages[1].oid)) |
| was_binary_blob = 1; |
| memcpy(&side1->stages[1], &merged, sizeof(merged)); |
| if (was_binary_blob) { |
| /* |
| * Getting here means we were attempting to |
| * merge a binary blob. |
| * |
| * Since we can't merge binaries, |
| * handle_content_merge() just takes one |
| * side. But we don't want to copy the |
| * contents of one side to both paths. We |
| * used the contents of side1 above for |
| * side1->stages, let's use the contents of |
| * side2 for side2->stages below. |
| */ |
| oidcpy(&merged.oid, &side2->stages[2].oid); |
| merged.mode = side2->stages[2].mode; |
| } |
| memcpy(&side2->stages[2], &merged, sizeof(merged)); |
| |
| side1->path_conflict = 1; |
| side2->path_conflict = 1; |
| /* |
| * TODO: For renames we normally remove the path at the |
| * old name. It would thus seem consistent to do the |
| * same for rename/rename(1to2) cases, but we haven't |
| * done so traditionally and a number of the regression |
| * tests now encode an expectation that the file is |
| * left there at stage 1. If we ever decide to change |
| * this, add the following two lines here: |
| * base->merged.is_null = 1; |
| * base->merged.clean = 1; |
| * and remove the setting of base->path_conflict to 1. |
| */ |
| base->path_conflict = 1; |
| path_msg(opt, oldpath, 0, |
| _("CONFLICT (rename/rename): %s renamed to " |
| "%s in %s and to %s in %s."), |
| pathnames[0], |
| pathnames[1], opt->branch1, |
| pathnames[2], opt->branch2); |
| |
| i++; /* We handled both renames, i.e. i+1 handled */ |
| continue; |
| } |
| |
| VERIFY_CI(oldinfo); |
| VERIFY_CI(newinfo); |
| target_index = pair->score; /* from collect_renames() */ |
| assert(target_index == 1 || target_index == 2); |
| other_source_index = 3 - target_index; |
| old_sidemask = (1 << other_source_index); /* 2 or 4 */ |
| source_deleted = (oldinfo->filemask == 1); |
| collision = ((newinfo->filemask & old_sidemask) != 0); |
| type_changed = !source_deleted && |
| (S_ISREG(oldinfo->stages[other_source_index].mode) != |
| S_ISREG(newinfo->stages[target_index].mode)); |
| if (type_changed && collision) { |
| /* |
| * special handling so later blocks can handle this... |
| * |
| * if type_changed && collision are both true, then this |
| * was really a double rename, but one side wasn't |
| * detected due to lack of break detection. I.e. |
| * something like |
| * orig: has normal file 'foo' |
| * side1: renames 'foo' to 'bar', adds 'foo' symlink |
| * side2: renames 'foo' to 'bar' |
| * In this case, the foo->bar rename on side1 won't be |
| * detected because the new symlink named 'foo' is |
| * there and we don't do break detection. But we detect |
| * this here because we don't want to merge the content |
| * of the foo symlink with the foo->bar file, so we |
| * have some logic to handle this special case. The |
| * easiest way to do that is make 'bar' on side1 not |
| * be considered a colliding file but the other part |
| * of a normal rename. If the file is very different, |
| * well we're going to get content merge conflicts |
| * anyway so it doesn't hurt. And if the colliding |
| * file also has a different type, that'll be handled |
| * by the content merge logic in process_entry() too. |
| * |
| * See also t6430, 'rename vs. rename/symlink' |
| */ |
| collision = 0; |
| } |
| if (source_deleted) { |
| if (target_index == 1) { |
| rename_branch = opt->branch1; |
| delete_branch = opt->branch2; |
| } else { |
| rename_branch = opt->branch2; |
| delete_branch = opt->branch1; |
| } |
| } |
| |
| assert(source_deleted || oldinfo->filemask & old_sidemask); |
| |
| /* Need to check for special types of rename conflicts... */ |
| if (collision && !source_deleted) { |
| /* collision: rename/add or rename/rename(2to1) */ |
| const char *pathnames[3]; |
| struct version_info merged; |
| |
| struct conflict_info *base, *side1, *side2; |
| unsigned clean; |
| |
| pathnames[0] = oldpath; |
| pathnames[other_source_index] = oldpath; |
| pathnames[target_index] = newpath; |
| |
| base = strmap_get(&opt->priv->paths, pathnames[0]); |
| side1 = strmap_get(&opt->priv->paths, pathnames[1]); |
| side2 = strmap_get(&opt->priv->paths, pathnames[2]); |
| |
| VERIFY_CI(base); |
| VERIFY_CI(side1); |
| VERIFY_CI(side2); |
| |
| clean = handle_content_merge(opt, pair->one->path, |
| &base->stages[0], |
| &side1->stages[1], |
| &side2->stages[2], |
| pathnames, |
| 1 + 2 * opt->priv->call_depth, |
| &merged); |
| |
| memcpy(&newinfo->stages[target_index], &merged, |
| sizeof(merged)); |
| if (!clean) { |
| path_msg(opt, newpath, 0, |
| _("CONFLICT (rename involved in " |
| "collision): rename of %s -> %s has " |
| "content conflicts AND collides " |
| "with another path; this may result " |
| "in nested conflict markers."), |
| oldpath, newpath); |
| } |
| } else if (collision && source_deleted) { |
| /* |
| * rename/add/delete or rename/rename(2to1)/delete: |
| * since oldpath was deleted on the side that didn't |
| * do the rename, there's not much of a content merge |
| * we can do for the rename. oldinfo->merged.is_null |
| * was already set, so we just leave things as-is so |
| * they look like an add/add conflict. |
| */ |
| |
| newinfo->path_conflict = 1; |
| path_msg(opt, newpath, 0, |
| _("CONFLICT (rename/delete): %s renamed " |
| "to %s in %s, but deleted in %s."), |
| oldpath, newpath, rename_branch, delete_branch); |
| } else { |
| /* |
| * a few different cases...start by copying the |
| * existing stage(s) from oldinfo over the newinfo |
| * and update the pathname(s). |
| */ |
| memcpy(&newinfo->stages[0], &oldinfo->stages[0], |
| sizeof(newinfo->stages[0])); |
| newinfo->filemask |= (1 << MERGE_BASE); |
| newinfo->pathnames[0] = oldpath; |
| if (type_changed) { |
| /* rename vs. typechange */ |
| /* Mark the original as resolved by removal */ |
| memcpy(&oldinfo->stages[0].oid, null_oid(), |
| sizeof(oldinfo->stages[0].oid)); |
| oldinfo->stages[0].mode = 0; |
| oldinfo->filemask &= 0x06; |
| } else if (source_deleted) { |
| /* rename/delete */ |
| newinfo->path_conflict = 1; |
| path_msg(opt, newpath, 0, |
| _("CONFLICT (rename/delete): %s renamed" |
| " to %s in %s, but deleted in %s."), |
| oldpath, newpath, |
| rename_branch, delete_branch); |
| } else { |
| /* normal rename */ |
| memcpy(&newinfo->stages[other_source_index], |
| &oldinfo->stages[other_source_index], |
| sizeof(newinfo->stages[0])); |
| newinfo->filemask |= (1 << other_source_index); |
| newinfo->pathnames[other_source_index] = oldpath; |
| } |
| } |
| |
| if (!type_changed) { |
| /* Mark the original as resolved by removal */ |
| oldinfo->merged.is_null = 1; |
| oldinfo->merged.clean = 1; |
| } |
| |
| } |
| |
| return clean_merge; |
| } |
| |
| static inline int possible_side_renames(struct rename_info *renames, |
| unsigned side_index) |
| { |
| return renames->pairs[side_index].nr > 0 && |
| !strintmap_empty(&renames->relevant_sources[side_index]); |
| } |
| |
| static inline int possible_renames(struct rename_info *renames) |
| { |
| return possible_side_renames(renames, 1) || |
| possible_side_renames(renames, 2) || |
| !strmap_empty(&renames->cached_pairs[1]) || |
| !strmap_empty(&renames->cached_pairs[2]); |
| } |
| |
| static void resolve_diffpair_statuses(struct diff_queue_struct *q) |
| { |
| /* |
| * A simplified version of diff_resolve_rename_copy(); would probably |
| * just use that function but it's static... |
| */ |
| int i; |
| struct diff_filepair *p; |
| |
| for (i = 0; i < q->nr; ++i) { |
| p = q->queue[i]; |
| p->status = 0; /* undecided */ |
| if (!DIFF_FILE_VALID(p->one)) |
| p->status = DIFF_STATUS_ADDED; |
| else if (!DIFF_FILE_VALID(p->two)) |
| p->status = DIFF_STATUS_DELETED; |
| else if (DIFF_PAIR_RENAME(p)) |
| p->status = DIFF_STATUS_RENAMED; |
| } |
| } |
| |
| static void prune_cached_from_relevant(struct rename_info *renames, |
| unsigned side) |
| { |
| /* Reason for this function described in add_pair() */ |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| |
| /* Remove from relevant_sources all entries in cached_pairs[side] */ |
| strmap_for_each_entry(&renames->cached_pairs[side], &iter, entry) { |
| strintmap_remove(&renames->relevant_sources[side], |
| entry->key); |
| } |
| /* Remove from relevant_sources all entries in cached_irrelevant[side] */ |
| strset_for_each_entry(&renames->cached_irrelevant[side], &iter, entry) { |
| strintmap_remove(&renames->relevant_sources[side], |
| entry->key); |
| } |
| } |
| |
| static void use_cached_pairs(struct merge_options *opt, |
| struct strmap *cached_pairs, |
| struct diff_queue_struct *pairs) |
| { |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| |
| /* |
| * Add to side_pairs all entries from renames->cached_pairs[side_index]. |
| * (Info in cached_irrelevant[side_index] is not relevant here.) |
| */ |
| strmap_for_each_entry(cached_pairs, &iter, entry) { |
| struct diff_filespec *one, *two; |
| const char *old_name = entry->key; |
| const char *new_name = entry->value; |
| if (!new_name) |
| new_name = old_name; |
| |
| /* |
| * cached_pairs has *copies* of old_name and new_name, |
| * because it has to persist across merges. Since |
| * pool_alloc_filespec() will just re-use the existing |
| * filenames, which will also get re-used by |
| * opt->priv->paths if they become renames, and then |
| * get freed at the end of the merge, that would leave |
| * the copy in cached_pairs dangling. Avoid this by |
| * making a copy here. |
| */ |
| old_name = mem_pool_strdup(&opt->priv->pool, old_name); |
| new_name = mem_pool_strdup(&opt->priv->pool, new_name); |
| |
| /* We don't care about oid/mode, only filenames and status */ |
| one = pool_alloc_filespec(&opt->priv->pool, old_name); |
| two = pool_alloc_filespec(&opt->priv->pool, new_name); |
| pool_diff_queue(&opt->priv->pool, pairs, one, two); |
| pairs->queue[pairs->nr-1]->status = entry->value ? 'R' : 'D'; |
| } |
| } |
| |
| static void cache_new_pair(struct rename_info *renames, |
| int side, |
| char *old_path, |
| char *new_path, |
| int free_old_value) |
| { |
| char *old_value; |
| new_path = xstrdup(new_path); |
| old_value = strmap_put(&renames->cached_pairs[side], |
| old_path, new_path); |
| strset_add(&renames->cached_target_names[side], new_path); |
| if (free_old_value) |
| free(old_value); |
| else |
| assert(!old_value); |
| } |
| |
| static void possibly_cache_new_pair(struct rename_info *renames, |
| struct diff_filepair *p, |
| unsigned side, |
| char *new_path) |
| { |
| int dir_renamed_side = 0; |
| |
| if (new_path) { |
| /* |
| * Directory renames happen on the other side of history from |
| * the side that adds new files to the old directory. |
| */ |
| dir_renamed_side = 3 - side; |
| } else { |
| int val = strintmap_get(&renames->relevant_sources[side], |
| p->one->path); |
| if (val == RELEVANT_NO_MORE) { |
| assert(p->status == 'D'); |
| strset_add(&renames->cached_irrelevant[side], |
| p->one->path); |
| } |
| if (val <= 0) |
| return; |
| } |
| |
| if (p->status == 'D') { |
| /* |
| * If we already had this delete, we'll just set it's value |
| * to NULL again, so no harm. |
| */ |
| strmap_put(&renames->cached_pairs[side], p->one->path, NULL); |
| } else if (p->status == 'R') { |
| if (!new_path) |
| new_path = p->two->path; |
| else |
| cache_new_pair(renames, dir_renamed_side, |
| p->two->path, new_path, 0); |
| cache_new_pair(renames, side, p->one->path, new_path, 1); |
| } else if (p->status == 'A' && new_path) { |
| cache_new_pair(renames, dir_renamed_side, |
| p->two->path, new_path, 0); |
| } |
| } |
| |
| static int compare_pairs(const void *a_, const void *b_) |
| { |
| const struct diff_filepair *a = *((const struct diff_filepair **)a_); |
| const struct diff_filepair *b = *((const struct diff_filepair **)b_); |
| |
| return strcmp(a->one->path, b->one->path); |
| } |
| |
| /* Call diffcore_rename() to update deleted/added pairs into rename pairs */ |
| static int detect_regular_renames(struct merge_options *opt, |
| unsigned side_index) |
| { |
| struct diff_options diff_opts; |
| struct rename_info *renames = &opt->priv->renames; |
| |
| prune_cached_from_relevant(renames, side_index); |
| if (!possible_side_renames(renames, side_index)) { |
| /* |
| * No rename detection needed for this side, but we still need |
| * to make sure 'adds' are marked correctly in case the other |
| * side had directory renames. |
| */ |
| resolve_diffpair_statuses(&renames->pairs[side_index]); |
| return 0; |
| } |
| |
| partial_clear_dir_rename_count(&renames->dir_rename_count[side_index]); |
| repo_diff_setup(opt->repo, &diff_opts); |
| diff_opts.flags.recursive = 1; |
| diff_opts.flags.rename_empty = 0; |
| diff_opts.detect_rename = DIFF_DETECT_RENAME; |
| diff_opts.rename_limit = opt->rename_limit; |
| if (opt->rename_limit <= 0) |
| diff_opts.rename_limit = 7000; |
| diff_opts.rename_score = opt->rename_score; |
| diff_opts.show_rename_progress = opt->show_rename_progress; |
| diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT; |
| diff_setup_done(&diff_opts); |
| |
| diff_queued_diff = renames->pairs[side_index]; |
| trace2_region_enter("diff", "diffcore_rename", opt->repo); |
| diffcore_rename_extended(&diff_opts, |
| &opt->priv->pool, |
| &renames->relevant_sources[side_index], |
| &renames->dirs_removed[side_index], |
| &renames->dir_rename_count[side_index], |
| &renames->cached_pairs[side_index]); |
| trace2_region_leave("diff", "diffcore_rename", opt->repo); |
| resolve_diffpair_statuses(&diff_queued_diff); |
| |
| if (diff_opts.needed_rename_limit > 0) |
| renames->redo_after_renames = 0; |
| if (diff_opts.needed_rename_limit > renames->needed_limit) |
| renames->needed_limit = diff_opts.needed_rename_limit; |
| |
| renames->pairs[side_index] = diff_queued_diff; |
| |
| diff_opts.output_format = DIFF_FORMAT_NO_OUTPUT; |
| diff_queued_diff.nr = 0; |
| diff_queued_diff.queue = NULL; |
| diff_flush(&diff_opts); |
| |
| return 1; |
| } |
| |
| /* |
| * Get information of all renames which occurred in 'side_pairs', making use |
| * of any implicit directory renames in side_dir_renames (also making use of |
| * implicit directory renames rename_exclusions as needed by |
| * check_for_directory_rename()). Add all (updated) renames into result. |
| */ |
| static int collect_renames(struct merge_options *opt, |
| struct diff_queue_struct *result, |
| unsigned side_index, |
| struct strmap *dir_renames_for_side, |
| struct strmap *rename_exclusions) |
| { |
| int i, clean = 1; |
| struct strmap collisions; |
| struct diff_queue_struct *side_pairs; |
| struct hashmap_iter iter; |
| struct strmap_entry *entry; |
| struct rename_info *renames = &opt->priv->renames; |
| |
| side_pairs = &renames->pairs[side_index]; |
| compute_collisions(&collisions, dir_renames_for_side, side_pairs); |
| |
| for (i = 0; i < side_pairs->nr; ++i) { |
| struct diff_filepair *p = side_pairs->queue[i]; |
| char *new_path; /* non-NULL only with directory renames */ |
| |
| if (p->status != 'A' && p->status != 'R') { |
| possibly_cache_new_pair(renames, p, side_index, NULL); |
| pool_diff_free_filepair(&opt->priv->pool, p); |
| continue; |
| } |
| |
| new_path = check_for_directory_rename(opt, p->two->path, |
| side_index, |
| dir_renames_for_side, |
| rename_exclusions, |
| &collisions, |
| &clean); |
| |
| possibly_cache_new_pair(renames, p, side_index, new_path); |
| if (p->status != 'R' && !new_path) { |
| pool_diff_free_filepair(&opt->priv->pool, p); |
| continue; |
| } |
| |
| if (new_path) |
| apply_directory_rename_modifications(opt, p, new_path); |
| |
| /* |
| * p->score comes back from diffcore_rename_extended() with |
| * the similarity of the renamed file. The similarity is |
| * was used to determine that the two files were related |
| * and are a rename, which we have already used, but beyond |
| * that we have no use for the similarity. So p->score is |
| * now irrelevant. However, process_renames() will need to |
| * know which side of the merge this rename was associated |
| * with, so overwrite p->score with that value. |
| */ |
| p->score = side_index; |
| result->queue[result->nr++] = p; |
| } |
| |
| /* Free each value in the collisions map */ |
| strmap_for_each_entry(&collisions, &iter, entry) { |
| struct collision_info *info = entry->value; |
| string_list_clear(&info->source_files, 0); |
| } |
| /* |
| * In compute_collisions(), we set collisions.strdup_strings to 0 |
| * so that we wouldn't have to make another copy of the new_path |
| * allocated by apply_dir_rename(). But now that we've used them |
| * and have no other references to these strings, it is time to |
| * deallocate them. |
| */ |
| free_strmap_strings(&collisions); |
| strmap_clear(&collisions, 1); |
| return clean; |
| } |
| |
| static int detect_and_process_renames(struct merge_options *opt, |
| struct tree *merge_base, |
| struct tree *side1, |
| struct tree *side2) |
| { |
| struct diff_queue_struct combined = { 0 }; |
| struct rename_info *renames = &opt->priv->renames; |
| int need_dir_renames, s, i, clean = 1; |
| unsigned detection_run = 0; |
| |
| if (!possible_renames(renames)) |
| goto cleanup; |
| |
| trace2_region_enter("merge", "regular renames", opt->repo); |
| detection_run |= detect_regular_renames(opt, MERGE_SIDE1); |
| detection_run |= detect_regular_renames(opt, MERGE_SIDE2); |
| if (renames->needed_limit) { |
| renames->cached_pairs_valid_side = 0; |
| renames->redo_after_renames = 0; |
| } |
| if (renames->redo_after_renames && detection_run) { |
| int i, side; |
| struct diff_filepair *p; |
| |
| /* Cache the renames, we found */ |
| for (side = MERGE_SIDE1; side <= MERGE_SIDE2; side++) { |
| for (i = 0; i < renames->pairs[side].nr; ++i) { |
| p = renames->pairs[side].queue[i]; |
| possibly_cache_new_pair(renames, p, side, NULL); |
| } |
| } |
| |
| /* Restart the merge with the cached renames */ |
| renames->redo_after_renames = 2; |
| trace2_region_leave("merge", "regular renames", opt->repo); |
| goto cleanup; |
| } |
| use_cached_pairs(opt, &renames->cached_pairs[1], &renames->pairs[1]); |
| use_cached_pairs(opt, &renames->cached_pairs[2], &renames->pairs[2]); |
| trace2_region_leave("merge", "regular renames", opt->repo); |
| |
| trace2_region_enter("merge", "directory renames", opt->repo); |
| need_dir_renames = |
| !opt->priv->call_depth && |
| (opt->detect_directory_renames == MERGE_DIRECTORY_RENAMES_TRUE || |
| opt->detect_directory_renames == MERGE_DIRECTORY_RENAMES_CONFLICT); |
| |
| if (need_dir_renames) { |
| get_provisional_directory_renames(opt, MERGE_SIDE1, &clean); |
| get_provisional_directory_renames(opt, MERGE_SIDE2, &clean); |
| handle_directory_level_conflicts(opt); |
| } |
| |
| ALLOC_GROW(combined.queue, |
| renames->pairs[1].nr + renames->pairs[2].nr, |
| combined.alloc); |
| clean &= collect_renames(opt, &combined, MERGE_SIDE1, |
| &renames->dir_renames[2], |
| &renames->dir_renames[1]); |
| clean &= collect_renames(opt, &combined, MERGE_SIDE2, |
| &renames->dir_renames[1], |
| &renames->dir_renames[2]); |
| STABLE_QSORT(combined.queue, combined.nr, compare_pairs); |
| trace2_region_leave("merge", "directory renames", opt->repo); |
| |
| trace2_region_enter("merge", "process renames", opt->repo); |
| clean &= process_renames(opt, &combined); |
| trace2_region_leave("merge", "process renames", opt->repo); |
| |
| goto simple_cleanup; /* collect_renames() handles some of cleanup */ |
| |
| cleanup: |
| /* |
| * Free now unneeded filepairs, which would have been handled |
| * in collect_renames() normally but we skipped that code. |
| */ |
| for (s = MERGE_SIDE1; s <= MERGE_SIDE2; s++) { |
| struct diff_queue_struct *side_pairs; |
| int i; |
| |
| side_pairs = &renames->pairs[s]; |
| for (i = 0; i < side_pairs->nr; ++i) { |
| struct diff_filepair *p = side_pairs->queue[i]; |
| pool_diff_free_filepair(&opt->priv->pool, p); |
| } |
| } |
| |
| simple_cleanup: |
| /* Free memory for renames->pairs[] and combined */ |
| for (s = MERGE_SIDE1; s <= MERGE_SIDE2; s++) { |
| free(renames->pairs[s].queue); |
| DIFF_QUEUE_CLEAR(&renames->pairs[s]); |
| } |
| for (i = 0; i < combined.nr; i++) |
| pool_diff_free_filepair(&opt->priv->pool, combined.queue[i]); |
| free(combined.queue); |
| |
| return clean; |
| } |
| |
| /*** Function Grouping: functions related to process_entries() ***/ |
| |
| static int sort_dirs_next_to_their_children(const char *one, const char *two) |
| { |
| unsigned char c1, c2; |
| |
| /* |
| * Here we only care that entries for directories appear adjacent |
| * to and before files underneath the directory. We can achieve |
| * that by pretending to add a trailing slash to every file and |
| * then sorting. In other words, we do not want the natural |
| * sorting of |
| * foo |
| * foo.txt |
| * foo/bar |
| * Instead, we want "foo" to sort as though it were "foo/", so that |
| * we instead get |
| * foo.txt |
| * foo |
| * foo/bar |
| * To achieve this, we basically implement our own strcmp, except that |
| * if we get to the end of either string instead of comparing NUL to |
| * another character, we compare '/' to it. |
| * |
| * If this unusual "sort as though '/' were appended" perplexes |
| * you, perhaps it will help to note that this is not the final |
| * sort. write_tree() will sort again without the trailing slash |
| * magic, but just on paths immediately under a given tree. |
| * |
| * The reason to not use df_name_compare directly was that it was |
| * just too expensive (we don't have the string lengths handy), so |
| * it was reimplemented. |
| */ |
| |
| /* |
| * NOTE: This function will never be called with two equal strings, |
| * because it is used to sort the keys of a strmap, and strmaps have |
| * unique keys by construction. That simplifies our c1==c2 handling |
| * below. |
| */ |
| |
| while (*one && (*one == *two)) { |
| one++; |
| two++; |
| } |
| |
| c1 = *one ? *one : '/'; |
| c2 = *two ? *two : '/'; |
| |
| if (c1 == c2) { |
| /* Getting here means one is a leading directory of the other */ |
| return (*one) ? 1 : -1; |
| } else |
| return c1 - c2; |
| } |
| |
| static int read_oid_strbuf(struct merge_options *opt, |
| const struct object_id *oid, |
| struct strbuf *dst) |
| { |
| void *buf; |
| enum object_type type; |
| unsigned long size; |
| buf = read_object_file(oid, &type, &size); |
| if (!buf) |
| return err(opt, _("cannot read object %s"), oid_to_hex(oid)); |
| if (type != OBJ_BLOB) { |
| free(buf); |
| return err(opt, _("object %s is not a blob"), oid_to_hex(oid)); |
| } |
| strbuf_attach(dst, buf, size, size + 1); |
| return 0; |
| } |
| |
| static int blob_unchanged(struct merge_options *opt, |
| const struct version_info *base, |
| const struct version_info *side, |
| const char *path) |
| { |
| struct strbuf basebuf = STRBUF_INIT; |
| struct strbuf sidebuf = STRBUF_INIT; |
| int ret = 0; /* assume changed for safety */ |
| struct index_state *idx = &opt->priv->attr_index; |
| |
| if (!idx->initialized) |
| initialize_attr_index(opt); |
| |
| if (base->mode != side->mode) |
| return 0; |
| if (oideq(&base->oid, &side->oid)) |
| return 1; |
| |
| if (read_oid_strbuf(opt, &base->oid, &basebuf) || |
| read_oid_strbuf(opt, &side->oid, &sidebuf)) |
| goto error_return; |
| /* |
| * Note: binary | is used so that both renormalizations are |
| * performed. Comparison can be skipped if both files are |
| * unchanged since their sha1s have already been compared. |
| */ |
| if (renormalize_buffer(idx, path, basebuf.buf, basebuf.len, &basebuf) | |
| renormalize_buffer(idx, path, sidebuf.buf, sidebuf.len, &sidebuf)) |
| ret = (basebuf.len == sidebuf.len && |
| !memcmp(basebuf.buf, sidebuf.buf, basebuf.len)); |
| |
| error_return: |
| strbuf_release(&basebuf); |
| strbuf_release(&sidebuf); |
| return ret; |
| } |
| |
| struct directory_versions { |
| /* |
| * versions: list of (basename -> version_info) |
| * |
| * The basenames are in reverse lexicographic order of full pathnames, |
| * as processed in process_entries(). This puts all entries within |
| * a directory together, and covers the directory itself after |
| * everything within it, allowing us to write subtrees before needing |
| * to record information for the tree itself. |
| */ |
| struct string_list versions; |
| |
| /* |
| * offsets: list of (full relative path directories -> integer offsets) |
| * |
| * Since versions contains basenames from files in multiple different |
| * directories, we need to know which entries in versions correspond |
| * to which directories. Values of e.g. |
| * "" 0 |
| * src 2 |
| * src/moduleA 5 |
| * Would mean that entries 0-1 of versions are files in the toplevel |
| * directory, entries 2-4 are files under src/, and the remaining |
| * entries starting at index 5 are files under src/moduleA/. |
| */ |
| struct string_list offsets; |
| |
| /* |
| * last_directory: directory that previously processed file found in |
| * |
| * last_directory starts NULL, but records the directory in which the |
| * previous file was found within. As soon as |
| * directory(current_file) != last_directory |
| * then we need to start updating accounting in versions & offsets. |
| * Note that last_directory is always the last path in "offsets" (or |
| * NULL if "offsets" is empty) so this exists just for quick access. |
| */ |
| const char *last_directory; |
| |
| /* last_directory_len: cached computation of strlen(last_directory) */ |
| unsigned last_directory_len; |
| }; |
| |
| static int tree_entry_order(const void *a_, const void *b_) |
| { |
| const struct string_list_item *a = a_; |
| const struct string_list_item *b = b_; |
| |
| const struct merged_info *ami = a->util; |
| const struct merged_info *bmi = b->util; |
| return base_name_compare(a->string, strlen(a->string), ami->result.mode, |
| b->string, strlen(b->string), bmi->result.mode); |
| } |
| |
| static void write_tree(struct object_id *result_oid, |
| struct string_list *versions, |
| unsigned int offset, |
| size_t hash_size) |
| { |
| size_t maxlen = 0, extra; |
| unsigned int nr; |
| struct strbuf buf = STRBUF_INIT; |
| int i; |
| |
| assert(offset <= versions->nr); |
| nr = versions->nr - offset; |
| if (versions->nr) |
| /* No need for STABLE_QSORT -- filenames must be unique */ |
| QSORT(versions->items + offset, nr, tree_entry_order); |
| |
| /* Pre-allocate some space in buf */ |
| extra = hash_size + 8; /* 8: 6 for mode, 1 for space, 1 for NUL char */ |
| for (i = 0; i < nr; i++) { |
| maxlen += strlen(versions->items[offset+i].string) + extra; |
| } |
| strbuf_grow(&buf, maxlen); |
| |
| /* Write each entry out to buf */ |
| for (i = 0; i < nr; i++) { |
| struct merged_info *mi = versions->items[offset+i].util; |
| struct version_info *ri = &mi->result; |
| strbuf_addf(&buf, "%o %s%c", |
| ri->mode, |
| versions->items[offset+i].string, '\0'); |
| strbuf_add(&buf, ri->oid.hash, hash_size); |
| } |
| |
| /* Write this object file out, and record in result_oid */ |
| write_object_file(buf.buf, buf.len, OBJ_TREE, result_oid); |
| strbuf_release(&buf); |
| } |
| |
| static void record_entry_for_tree(struct directory_versions *dir_metadata, |
| const char *path, |
| struct merged_info *mi) |
| { |
| const char *basename; |
| |
| if (mi->is_null) |
| /* nothing to record */ |
| return; |
| |
| basename = path + mi->basename_offset; |
| assert(strchr(basename, '/') == NULL); |
| string_list_append(&dir_metadata->versions, |
| basename)->util = &mi->result; |
| } |
| |
| static void write_completed_directory(struct merge_options *opt, |
| const char *new_directory_name, |
| struct directory_versions *info) |
| { |
| const char *prev_dir; |
| struct merged_info *dir_info = NULL; |
| unsigned int offset; |
| |
| /* |
| * Some explanation of info->versions and info->offsets... |
| * |
| * process_entries() iterates over all relevant files AND |
| * directories in reverse lexicographic order, and calls this |
| * function. Thus, an example of the paths that process_entries() |
| * could operate on (along with the directories for those paths |
| * being shown) is: |
| * |
| * xtract.c "" |
| * tokens.txt "" |
| * src/moduleB/umm.c src/moduleB |
| * src/moduleB/stuff.h src/moduleB |
| * src/moduleB/baz.c src/moduleB |
| * src/moduleB src |
| * src/moduleA/foo.c src/moduleA |
| * src/moduleA/bar.c src/moduleA |
| * src/moduleA src |
| * src "" |
| * Makefile "" |
| * |
| * info->versions: |
| * |
| * always contains the unprocessed entries and their |
| * version_info information. For example, after the first five |
| * entries above, info->versions would be: |
| * |
| * xtract.c <xtract.c's version_info> |
| * token.txt <token.txt's version_info> |
| * umm.c <src/moduleB/umm.c's version_info> |
| * stuff.h <src/moduleB/stuff.h's version_info> |
| * baz.c <src/moduleB/baz.c's version_info> |
| * |
| * Once a subdirectory is completed we remove the entries in |
| * that subdirectory from info->versions, writing it as a tree |
| * (write_tree()). Thus, as soon as we get to src/moduleB, |
| * info->versions would be updated to |
| * |
| * xtract.c <xtract.c's version_info> |
| * token.txt <token.txt's version_info> |
| * moduleB <src/moduleB's version_info> |
| * |
| * info->offsets: |
| * |
| * helps us track which entries in info->versions correspond to |
| * which directories. When we are N directories deep (e.g. 4 |
| * for src/modA/submod/subdir/), we have up to N+1 unprocessed |
| * directories (+1 because of toplevel dir). Corresponding to |
| * the info->versions example above, after processing five entries |
| * info->offsets will be: |
| * |
| * "" 0 |
| * src/moduleB 2 |
| * |
| * which is used to know that xtract.c & token.txt are from the |
| * toplevel dirctory, while umm.c & stuff.h & baz.c are from the |
| * src/moduleB directory. Again, following the example above, |
| * once we need to process src/moduleB, then info->offsets is |
| * updated to |
| * |
| * "" 0 |
| * src 2 |
| * |
| * which says that moduleB (and only moduleB so far) is in the |
| * src directory. |
| * |
| * One unique thing to note about info->offsets here is that |
| * "src" was not added to info->offsets until there was a path |
| * (a file OR directory) immediately below src/ that got |
| * processed. |
| * |
| * Since process_entry() just appends new entries to info->versions, |
| * write_completed_directory() only needs to do work if the next path |
| * is in a directory that is different than the last directory found |
| * in info->offsets. |
| */ |
| |
| /* |
| * If we are working with the same directory as the last entry, there |
| * is no work to do. (See comments above the directory_name member of |
| * struct merged_info for why we can use pointer comparison instead of |
| * strcmp here.) |
| */ |
| if (new_directory_name == info->last_directory) |
| return; |
| |
| /* |
| * If we are just starting (last_directory is NULL), or last_directory |
| * is a prefix of the current directory, then we can just update |
| * info->offsets to record the offset where we started this directory |
| * and update last_directory to have quick access to it. |
| */ |
| if (info->last_directory == NULL || |
| !strncmp(new_directory_name, info->last_directory, |
| info->last_directory_len)) { |
| uintptr_t offset = info->versions.nr; |
| |
| info->last_directory = new_directory_name; |
| info->last_directory_len = strlen(info->last_directory); |
| /* |
| * Record the offset into info->versions where we will |
| * start recording basenames of paths found within |
| * new_directory_name. |
| */ |
| string_list_append(&info->offsets, |
| info->last_directory)->util = (void*)offset; |
| return; |
| } |
| |
| /* |
| * The next entry that will be processed will be within |
| * new_directory_name. Since at this point we know that |
| * new_directory_name is within a different directory than |
| * info->last_directory, we have all entries for info->last_directory |
| * in info->versions and we need to create a tree object for them. |
| */ |
| dir_info = strmap_get(&opt->priv->paths, info->last_directory); |
| assert(dir_info); |
| offset = (uintptr_t)info->offsets.items[info->offsets.nr-1].util; |
| if (offset == info->versions.nr) { |
| /* |
| * Actually, we don't need to create a tree object in this |
| * case. Whenever all files within a directory disappear |
| * during the merge (e.g. unmodified on one side and |
| * deleted on the other, or files were renamed elsewhere), |
| * then we get here and the directory itself needs to be |
| * omitted from its parent tree as well. |
| */ |
| dir_info->is_null = 1; |
| } else { |
| /* |
| * Write out the tree to the git object directory, and also |
| * record the mode and oid in dir_info->result. |
| */ |
| dir_info->is_null = 0; |
| dir_info->result.mode = S_IFDIR; |
| write_tree(&dir_info->result.oid, &info->versions, offset, |
| opt->repo->hash_algo->rawsz); |
| } |
| |
| /* |
| * We've now used several entries from info->versions and one entry |
| * from info->offsets, so we get rid of those values. |
| */ |
| info->offsets.nr--; |
| info->versions.nr = offset; |
| |
| /* |
| * Now we've taken care of the completed directory, but we need to |
| * prepare things since future entries will be in |
| * new_directory_name. (In particular, process_entry() will be |
| * appending new entries to info->versions.) So, we need to make |
| * sure new_directory_name is the last entry in info->offsets. |
| */ |
| prev_dir = info->offsets.nr == 0 ? NULL : |
| info->offsets.items[info->offsets.nr-1].string; |
| if (new_directory_name != prev_dir) { |
| uintptr_t c = info->versions.nr; |
| string_list_append(&info->offsets, |
| new_directory_name)->util = (void*)c; |
| } |
| |
| /* And, of course, we need to update last_directory to match. */ |
| info->last_directory = new_directory_name; |
| info->last_directory_len = strlen(info->last_directory); |
| } |
| |
| /* Per entry merge function */ |
| static void process_entry(struct merge_options *opt, |
| const char *path, |
| struct conflict_info *ci, |
| struct directory_versions *dir_metadata) |
| { |
| int df_file_index = 0; |
| |
| VERIFY_CI(ci); |
| assert(ci->filemask >= 0 && ci->filemask <= 7); |
| /* ci->match_mask == 7 was handled in collect_merge_info_callback() */ |
| assert(ci->match_mask == 0 || ci->match_mask == 3 || |
| ci->match_mask == 5 || ci->match_mask == 6); |
| |
| if (ci->dirmask) { |
| record_entry_for_tree(dir_metadata, path, &ci->merged); |
| if (ci->filemask == 0) |
| /* nothing else to handle */ |
| return; |
| assert(ci->df_conflict); |
| } |
| |
| if (ci->df_conflict && ci->merged.result.mode == 0) { |
| int i; |
| |
| /* |
| * directory no longer in the way, but we do have a file we |
| * need to place here so we need to clean away the "directory |
| * merges to nothing" result. |
| */ |
| ci->df_conflict = 0; |
| assert(ci->filemask != 0); |
| ci->merged.clean = 0; |
| ci->merged.is_null = 0; |
| /* and we want to zero out any directory-related entries */ |
| ci->match_mask = (ci->match_mask & ~ci->dirmask); |
| ci->dirmask = 0; |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) { |
| if (ci->filemask & (1 << i)) |
| continue; |
| ci->stages[i].mode = 0; |
| oidcpy(&ci->stages[i].oid, null_oid()); |
| } |
| } else if (ci->df_conflict && ci->merged.result.mode != 0) { |
| /* |
| * This started out as a D/F conflict, and the entries in |
| * the competing directory were not removed by the merge as |
| * evidenced by write_completed_directory() writing a value |
| * to ci->merged.result.mode. |
| */ |
| struct conflict_info *new_ci; |
| const char *branch; |
| const char *old_path = path; |
| int i; |
| |
| assert(ci->merged.result.mode == S_IFDIR); |
| |
| /* |
| * If filemask is 1, we can just ignore the file as having |
| * been deleted on both sides. We do not want to overwrite |
| * ci->merged.result, since it stores the tree for all the |
| * files under it. |
| */ |
| if (ci->filemask == 1) { |
| ci->filemask = 0; |
| return; |
| } |
| |
| /* |
| * This file still exists on at least one side, and we want |
| * the directory to remain here, so we need to move this |
| * path to some new location. |
| */ |
| new_ci = mem_pool_calloc(&opt->priv->pool, 1, sizeof(*new_ci)); |
| |
| /* We don't really want new_ci->merged.result copied, but it'll |
| * be overwritten below so it doesn't matter. We also don't |
| * want any directory mode/oid values copied, but we'll zero |
| * those out immediately. We do want the rest of ci copied. |
| */ |
| memcpy(new_ci, ci, sizeof(*ci)); |
| new_ci->match_mask = (new_ci->match_mask & ~new_ci->dirmask); |
| new_ci->dirmask = 0; |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) { |
| if (new_ci->filemask & (1 << i)) |
| continue; |
| /* zero out any entries related to directories */ |
| new_ci->stages[i].mode = 0; |
| oidcpy(&new_ci->stages[i].oid, null_oid()); |
| } |
| |
| /* |
| * Find out which side this file came from; note that we |
| * cannot just use ci->filemask, because renames could cause |
| * the filemask to go back to 7. So we use dirmask, then |
| * pick the opposite side's index. |
| */ |
| df_file_index = (ci->dirmask & (1 << 1)) ? 2 : 1; |
| branch = (df_file_index == 1) ? opt->branch1 : opt->branch2; |
| path = unique_path(opt, path, branch); |
| strmap_put(&opt->priv->paths, path, new_ci); |
| |
| path_msg(opt, path, 0, |
| _("CONFLICT (file/directory): directory in the way " |
| "of %s from %s; moving it to %s instead."), |
| old_path, branch, path); |
| |
| /* |
| * Zero out the filemask for the old ci. At this point, ci |
| * was just an entry for a directory, so we don't need to |
| * do anything more with it. |
| */ |
| ci->filemask = 0; |
| |
| /* |
| * Now note that we're working on the new entry (path was |
| * updated above. |
| */ |
| ci = new_ci; |
| } |
| |
| /* |
| * NOTE: Below there is a long switch-like if-elseif-elseif... block |
| * which the code goes through even for the df_conflict cases |
| * above. |
| */ |
| if (ci->match_mask) { |
| ci->merged.clean = !ci->df_conflict && !ci->path_conflict; |
| if (ci->match_mask == 6) { |
| /* stages[1] == stages[2] */ |
| ci->merged.result.mode = ci->stages[1].mode; |
| oidcpy(&ci->merged.result.oid, &ci->stages[1].oid); |
| } else { |
| /* determine the mask of the side that didn't match */ |
| unsigned int othermask = 7 & ~ci->match_mask; |
| int side = (othermask == 4) ? 2 : 1; |
| |
| ci->merged.result.mode = ci->stages[side].mode; |
| ci->merged.is_null = !ci->merged.result.mode; |
| if (ci->merged.is_null) |
| ci->merged.clean = 1; |
| oidcpy(&ci->merged.result.oid, &ci->stages[side].oid); |
| |
| assert(othermask == 2 || othermask == 4); |
| assert(ci->merged.is_null == |
| (ci->filemask == ci->match_mask)); |
| } |
| } else if (ci->filemask >= 6 && |
| (S_IFMT & ci->stages[1].mode) != |
| (S_IFMT & ci->stages[2].mode)) { |
| /* Two different items from (file/submodule/symlink) */ |
| if (opt->priv->call_depth) { |
| /* Just use the version from the merge base */ |
| ci->merged.clean = 0; |
| oidcpy(&ci->merged.result.oid, &ci->stages[0].oid); |
| ci->merged.result.mode = ci->stages[0].mode; |
| ci->merged.is_null = (ci->merged.result.mode == 0); |
| } else { |
| /* Handle by renaming one or both to separate paths. */ |
| unsigned o_mode = ci->stages[0].mode; |
| unsigned a_mode = ci->stages[1].mode; |
| unsigned b_mode = ci->stages[2].mode; |
| struct conflict_info *new_ci; |
| const char *a_path = NULL, *b_path = NULL; |
| int rename_a = 0, rename_b = 0; |
| |
| new_ci = mem_pool_alloc(&opt->priv->pool, |
| sizeof(*new_ci)); |
| |
| if (S_ISREG(a_mode)) |
| rename_a = 1; |
| else if (S_ISREG(b_mode)) |
| rename_b = 1; |
| else { |
| rename_a = 1; |
| rename_b = 1; |
| } |
| |
| if (rename_a && rename_b) { |
| path_msg(opt, path, 0, |
| _("CONFLICT (distinct types): %s had " |
| "different types on each side; " |
| "renamed both of them so each can " |
| "be recorded somewhere."), |
| path); |
| } else { |
| path_msg(opt, path, 0, |
| _("CONFLICT (distinct types): %s had " |
| "different types on each side; " |
| "renamed one of them so each can be " |
| "recorded somewhere."), |
| path); |
| } |
| |
| ci->merged.clean = 0; |
| memcpy(new_ci, ci, sizeof(*new_ci)); |
| |
| /* Put b into new_ci, removing a from stages */ |
| new_ci->merged.result.mode = ci->stages[2].mode; |
| oidcpy(&new_ci->merged.result.oid, &ci->stages[2].oid); |
| new_ci->stages[1].mode = 0; |
| oidcpy(&new_ci->stages[1].oid, null_oid()); |
| new_ci->filemask = 5; |
| if ((S_IFMT & b_mode) != (S_IFMT & o_mode)) { |
| new_ci->stages[0].mode = 0; |
| oidcpy(&new_ci->stages[0].oid, null_oid()); |
| new_ci->filemask = 4; |
| } |
| |
| /* Leave only a in ci, fixing stages. */ |
| ci->merged.result.mode = ci->stages[1].mode; |
| oidcpy(&ci->merged.result.oid, &ci->stages[1].oid); |
| ci->stages[2].mode = 0; |
| oidcpy(&ci->stages[2].oid, null_oid()); |
| ci->filemask = 3; |
| if ((S_IFMT & a_mode) != (S_IFMT & o_mode)) { |
| ci->stages[0].mode = 0; |
| oidcpy(&ci->stages[0].oid, null_oid()); |
| ci->filemask = 2; |
| } |
| |
| /* Insert entries into opt->priv_paths */ |
| assert(rename_a || rename_b); |
| if (rename_a) { |
| a_path = unique_path(opt, path, opt->branch1); |
| strmap_put(&opt->priv->paths, a_path, ci); |
| } |
| |
| if (rename_b) |
| b_path = unique_path(opt, path, opt->branch2); |
| else |
| b_path = path; |
| strmap_put(&opt->priv->paths, b_path, new_ci); |
| |
| if (rename_a && rename_b) |
| strmap_remove(&opt->priv->paths, path, 0); |
| |
| /* |
| * Do special handling for b_path since process_entry() |
| * won't be called on it specially. |
| */ |
| strmap_put(&opt->priv->conflicted, b_path, new_ci); |
| record_entry_for_tree(dir_metadata, b_path, |
| &new_ci->merged); |
| |
| /* |
| * Remaining code for processing this entry should |
| * think in terms of processing a_path. |
| */ |
| if (a_path) |
| path = a_path; |
| } |
| } else if (ci->filemask >= 6) { |
| /* Need a two-way or three-way content merge */ |
| struct version_info merged_file; |
| unsigned clean_merge; |
| struct version_info *o = &ci->stages[0]; |
| struct version_info *a = &ci->stages[1]; |
| struct version_info *b = &ci->stages[2]; |
| |
| clean_merge = handle_content_merge(opt, path, o, a, b, |
| ci->pathnames, |
| opt->priv->call_depth * 2, |
| &merged_file); |
| ci->merged.clean = clean_merge && |
| !ci->df_conflict && !ci->path_conflict; |
| ci->merged.result.mode = merged_file.mode; |
| ci->merged.is_null = (merged_file.mode == 0); |
| oidcpy(&ci->merged.result.oid, &merged_file.oid); |
| if (clean_merge && ci->df_conflict) { |
| assert(df_file_index == 1 || df_file_index == 2); |
| ci->filemask = 1 << df_file_index; |
| ci->stages[df_file_index].mode = merged_file.mode; |
| oidcpy(&ci->stages[df_file_index].oid, &merged_file.oid); |
| } |
| if (!clean_merge) { |
| const char *reason = _("content"); |
| if (ci->filemask == 6) |
| reason = _("add/add"); |
| if (S_ISGITLINK(merged_file.mode)) |
| reason = _("submodule"); |
| path_msg(opt, path, 0, |
| _("CONFLICT (%s): Merge conflict in %s"), |
| reason, path); |
| } |
| } else if (ci->filemask == 3 || ci->filemask == 5) { |
| /* Modify/delete */ |
| const char *modify_branch, *delete_branch; |
| int side = (ci->filemask == 5) ? 2 : 1; |
| int index = opt->priv->call_depth ? 0 : side; |
| |
| ci->merged.result.mode = ci->stages[index].mode; |
| oidcpy(&ci->merged.result.oid, &ci->stages[index].oid); |
| ci->merged.clean = 0; |
| |
| modify_branch = (side == 1) ? opt->branch1 : opt->branch2; |
| delete_branch = (side == 1) ? opt->branch2 : opt->branch1; |
| |
| if (opt->renormalize && |
| blob_unchanged(opt, &ci->stages[0], &ci->stages[side], |
| path)) { |
| if (!ci->path_conflict) { |
| /* |
| * Blob unchanged after renormalization, so |
| * there's no modify/delete conflict after all; |
| * we can just remove the file. |
| */ |
| ci->merged.is_null = 1; |
| ci->merged.clean = 1; |
| /* |
| * file goes away => even if there was a |
| * directory/file conflict there isn't one now. |
| */ |
| ci->df_conflict = 0; |
| } else { |
| /* rename/delete, so conflict remains */ |
| } |
| } else if (ci->path_conflict && |
| oideq(&ci->stages[0].oid, &ci->stages[side].oid)) { |
| /* |
| * This came from a rename/delete; no action to take, |
| * but avoid printing "modify/delete" conflict notice |
| * since the contents were not modified. |
| */ |
| } else { |
| path_msg(opt, path, 0, |
| _("CONFLICT (modify/delete): %s deleted in %s " |
| "and modified in %s. Version %s of %s left " |
| "in tree."), |
| path, delete_branch, modify_branch, |
| modify_branch, path); |
| } |
| } else if (ci->filemask == 2 || ci->filemask == 4) { |
| /* Added on one side */ |
| int side = (ci->filemask == 4) ? 2 : 1; |
| ci->merged.result.mode = ci->stages[side].mode; |
| oidcpy(&ci->merged.result.oid, &ci->stages[side].oid); |
| ci->merged.clean = !ci->df_conflict && !ci->path_conflict; |
| } else if (ci->filemask == 1) { |
| /* Deleted on both sides */ |
| ci->merged.is_null = 1; |
| ci->merged.result.mode = 0; |
| oidcpy(&ci->merged.result.oid, null_oid()); |
| assert(!ci->df_conflict); |
| ci->merged.clean = !ci->path_conflict; |
| } |
| |
| /* |
| * If still conflicted, record it separately. This allows us to later |
| * iterate over just conflicted entries when updating the index instead |
| * of iterating over all entries. |
| */ |
| if (!ci->merged.clean) |
| strmap_put(&opt->priv->conflicted, path, ci); |
| |
| /* Record metadata for ci->merged in dir_metadata */ |
| record_entry_for_tree(dir_metadata, path, &ci->merged); |
| } |
| |
| static void prefetch_for_content_merges(struct merge_options *opt, |
| struct string_list *plist) |
| { |
| struct string_list_item *e; |
| struct oid_array to_fetch = OID_ARRAY_INIT; |
| |
| if (opt->repo != the_repository || !has_promisor_remote()) |
| return; |
| |
| for (e = &plist->items[plist->nr-1]; e >= plist->items; --e) { |
| /* char *path = e->string; */ |
| struct conflict_info *ci = e->util; |
| int i; |
| |
| /* Ignore clean entries */ |
| if (ci->merged.clean) |
| continue; |
| |
| /* Ignore entries that don't need a content merge */ |
| if (ci->match_mask || ci->filemask < 6 || |
| !S_ISREG(ci->stages[1].mode) || |
| !S_ISREG(ci->stages[2].mode) || |
| oideq(&ci->stages[1].oid, &ci->stages[2].oid)) |
| continue; |
| |
| /* Also don't need content merge if base matches either side */ |
| if (ci->filemask == 7 && |
| S_ISREG(ci->stages[0].mode) && |
| (oideq(&ci->stages[0].oid, &ci->stages[1].oid) || |
| oideq(&ci->stages[0].oid, &ci->stages[2].oid))) |
| continue; |
| |
| for (i = 0; i < 3; i++) { |
| unsigned side_mask = (1 << i); |
| struct version_info *vi = &ci->stages[i]; |
| |
| if ((ci->filemask & side_mask) && |
| S_ISREG(vi->mode) && |
| oid_object_info_extended(opt->repo, &vi->oid, NULL, |
| OBJECT_INFO_FOR_PREFETCH)) |
| oid_array_append(&to_fetch, &vi->oid); |
| } |
| } |
| |
| promisor_remote_get_direct(opt->repo, to_fetch.oid, to_fetch.nr); |
| oid_array_clear(&to_fetch); |
| } |
| |
| static void process_entries(struct merge_options *opt, |
| struct object_id *result_oid) |
| { |
| struct hashmap_iter iter; |
| struct strmap_entry *e; |
| struct string_list plist = STRING_LIST_INIT_NODUP; |
| struct string_list_item *entry; |
| struct directory_versions dir_metadata = { STRING_LIST_INIT_NODUP, |
| STRING_LIST_INIT_NODUP, |
| NULL, 0 }; |
| |
| trace2_region_enter("merge", "process_entries setup", opt->repo); |
| if (strmap_empty(&opt->priv->paths)) { |
| oidcpy(result_oid, opt->repo->hash_algo->empty_tree); |
| return; |
| } |
| |
| /* Hack to pre-allocate plist to the desired size */ |
| trace2_region_enter("merge", "plist grow", opt->repo); |
| ALLOC_GROW(plist.items, strmap_get_size(&opt->priv->paths), plist.alloc); |
| trace2_region_leave("merge", "plist grow", opt->repo); |
| |
| /* Put every entry from paths into plist, then sort */ |
| trace2_region_enter("merge", "plist copy", opt->repo); |
| strmap_for_each_entry(&opt->priv->paths, &iter, e) { |
| string_list_append(&plist, e->key)->util = e->value; |
| } |
| trace2_region_leave("merge", "plist copy", opt->repo); |
| |
| trace2_region_enter("merge", "plist special sort", opt->repo); |
| plist.cmp = sort_dirs_next_to_their_children; |
| string_list_sort(&plist); |
| trace2_region_leave("merge", "plist special sort", opt->repo); |
| |
| trace2_region_leave("merge", "process_entries setup", opt->repo); |
| |
| /* |
| * Iterate over the items in reverse order, so we can handle paths |
| * below a directory before needing to handle the directory itself. |
| * |
| * This allows us to write subtrees before we need to write trees, |
| * and it also enables sane handling of directory/file conflicts |
| * (because it allows us to know whether the directory is still in |
| * the way when it is time to process the file at the same path). |
| */ |
| trace2_region_enter("merge", "processing", opt->repo); |
| prefetch_for_content_merges(opt, &plist); |
| for (entry = &plist.items[plist.nr-1]; entry >= plist.items; --entry) { |
| char *path = entry->string; |
| /* |
| * NOTE: mi may actually be a pointer to a conflict_info, but |
| * we have to check mi->clean first to see if it's safe to |
| * reassign to such a pointer type. |
| */ |
| struct merged_info *mi = entry->util; |
| |
| write_completed_directory(opt, mi->directory_name, |
| &dir_metadata); |
| if (mi->clean) |
| record_entry_for_tree(&dir_metadata, path, mi); |
| else { |
| struct conflict_info *ci = (struct conflict_info *)mi; |
| process_entry(opt, path, ci, &dir_metadata); |
| } |
| } |
| trace2_region_leave("merge", "processing", opt->repo); |
| |
| trace2_region_enter("merge", "process_entries cleanup", opt->repo); |
| if (dir_metadata.offsets.nr != 1 || |
| (uintptr_t)dir_metadata.offsets.items[0].util != 0) { |
| printf("dir_metadata.offsets.nr = %"PRIuMAX" (should be 1)\n", |
| (uintmax_t)dir_metadata.offsets.nr); |
| printf("dir_metadata.offsets.items[0].util = %u (should be 0)\n", |
| (unsigned)(uintptr_t)dir_metadata.offsets.items[0].util); |
| fflush(stdout); |
| BUG("dir_metadata accounting completely off; shouldn't happen"); |
| } |
| write_tree(result_oid, &dir_metadata.versions, 0, |
| opt->repo->hash_algo->rawsz); |
| string_list_clear(&plist, 0); |
| string_list_clear(&dir_metadata.versions, 0); |
| string_list_clear(&dir_metadata.offsets, 0); |
| trace2_region_leave("merge", "process_entries cleanup", opt->repo); |
| } |
| |
| /*** Function Grouping: functions related to merge_switch_to_result() ***/ |
| |
| static int checkout(struct merge_options *opt, |
| struct tree *prev, |
| struct tree *next) |
| { |
| /* Switch the index/working copy from old to new */ |
| int ret; |
| struct tree_desc trees[2]; |
| struct unpack_trees_options unpack_opts; |
| |
| memset(&unpack_opts, 0, sizeof(unpack_opts)); |
| unpack_opts.head_idx = -1; |
| unpack_opts.src_index = opt->repo->index; |
| unpack_opts.dst_index = opt->repo->index; |
| |
| setup_unpack_trees_porcelain(&unpack_opts, "merge"); |
| |
| /* |
| * NOTE: if this were just "git checkout" code, we would probably |
| * read or refresh the cache and check for a conflicted index, but |
| * builtin/merge.c or sequencer.c really needs to read the index |
| * and check for conflicted entries before starting merging for a |
| * good user experience (no sense waiting for merges/rebases before |
| * erroring out), so there's no reason to duplicate that work here. |
| */ |
| |
| /* 2-way merge to the new branch */ |
| unpack_opts.update = 1; |
| unpack_opts.merge = 1; |
| unpack_opts.quiet = 0; /* FIXME: sequencer might want quiet? */ |
| unpack_opts.verbose_update = (opt->verbosity > 2); |
| unpack_opts.fn = twoway_merge; |
| unpack_opts.preserve_ignored = 0; /* FIXME: !opts->overwrite_ignore */ |
| parse_tree(prev); |
| init_tree_desc(&trees[0], prev->buffer, prev->size); |
| parse_tree(next); |
| init_tree_desc(&trees[1], next->buffer, next->size); |
| |
| ret = unpack_trees(2, trees, &unpack_opts); |
| clear_unpack_trees_porcelain(&unpack_opts); |
| return ret; |
| } |
| |
| static int record_conflicted_index_entries(struct merge_options *opt) |
| { |
| struct hashmap_iter iter; |
| struct strmap_entry *e; |
| struct index_state *index = opt->repo->index; |
| struct checkout state = CHECKOUT_INIT; |
| int errs = 0; |
| int original_cache_nr; |
| |
| if (strmap_empty(&opt->priv->conflicted)) |
| return 0; |
| |
| /* |
| * We are in a conflicted state. These conflicts might be inside |
| * sparse-directory entries, so check if any entries are outside |
| * of the sparse-checkout cone preemptively. |
| * |
| * We set original_cache_nr below, but that might change if |
| * index_name_pos() calls ask for paths within sparse directories. |
| */ |
| strmap_for_each_entry(&opt->priv->conflicted, &iter, e) { |
| if (!path_in_sparse_checkout(e->key, index)) { |
| ensure_full_index(index); |
| break; |
| } |
| } |
| |
| /* If any entries have skip_worktree set, we'll have to check 'em out */ |
| state.force = 1; |
| state.quiet = 1; |
| state.refresh_cache = 1; |
| state.istate = index; |
| original_cache_nr = index->cache_nr; |
| |
| /* Append every entry from conflicted into index, then sort */ |
| strmap_for_each_entry(&opt->priv->conflicted, &iter, e) { |
| const char *path = e->key; |
| struct conflict_info *ci = e->value; |
| int pos; |
| struct cache_entry *ce; |
| int i; |
| |
| VERIFY_CI(ci); |
| |
| /* |
| * The index will already have a stage=0 entry for this path, |
| * because we created an as-merged-as-possible version of the |
| * file and checkout() moved the working copy and index over |
| * to that version. |
| * |
| * However, previous iterations through this loop will have |
| * added unstaged entries to the end of the cache which |
| * ignore the standard alphabetical ordering of cache |
| * entries and break invariants needed for index_name_pos() |
| * to work. However, we know the entry we want is before |
| * those appended cache entries, so do a temporary swap on |
| * cache_nr to only look through entries of interest. |
| */ |
| SWAP(index->cache_nr, original_cache_nr); |
| pos = index_name_pos(index, path, strlen(path)); |
| SWAP(index->cache_nr, original_cache_nr); |
| if (pos < 0) { |
| if (ci->filemask != 1) |
| BUG("Conflicted %s but nothing in basic working tree or index; this shouldn't happen", path); |
| cache_tree_invalidate_path(index, path); |
| } else { |
| ce = index->cache[pos]; |
| |
| /* |
| * Clean paths with CE_SKIP_WORKTREE set will not be |
| * written to the working tree by the unpack_trees() |
| * call in checkout(). Our conflicted entries would |
| * have appeared clean to that code since we ignored |
| * the higher order stages. Thus, we need override |
| * the CE_SKIP_WORKTREE bit and manually write those |
| * files to the working disk here. |
| */ |
| if (ce_skip_worktree(ce)) { |
| struct stat st; |
| |
| if (!lstat(path, &st)) { |
| char *new_name = unique_path(opt, |
| path, |
| "cruft"); |
| |
| path_msg(opt, path, 1, |
| _("Note: %s not up to date and in way of checking out conflicted version; old copy renamed to %s"), |
| path, new_name); |
| errs |= rename(path, new_name); |
| } |
| errs |= checkout_entry(ce, &state, NULL, NULL); |
| } |
| |
| /* |
| * Mark this cache entry for removal and instead add |
| * new stage>0 entries corresponding to the |
| * conflicts. If there are many conflicted entries, we |
| * want to avoid memmove'ing O(NM) entries by |
| * inserting the new entries one at a time. So, |
| * instead, we just add the new cache entries to the |
| * end (ignoring normal index requirements on sort |
| * order) and sort the index once we're all done. |
| */ |
| ce->ce_flags |= CE_REMOVE; |
| } |
| |
| for (i = MERGE_BASE; i <= MERGE_SIDE2; i++) { |
| struct version_info *vi; |
| if (!(ci->filemask & (1ul << i))) |
| continue; |
| vi = &ci->stages[i]; |
| ce = make_cache_entry(index, vi->mode, &vi->oid, |
| path, i+1, 0); |
| add_index_entry(index, ce, ADD_CACHE_JUST_APPEND); |
| } |
| } |
| |
| /* |
| * Remove the unused cache entries (and invalidate the relevant |
| * cache-trees), then sort the index entries to get the conflicted |
| * entries we added to the end into their right locations. |
| */ |
| remove_marked_cache_entries(index, 1); |
| /* |
| * No need for STABLE_QSORT -- cmp_cache_name_compare sorts primarily |
| * on filename and secondarily on stage, and (name, stage #) are a |
| * unique tuple. |
| */ |
| QSORT(index->cache, index->cache_nr, cmp_cache_name_compare); |
| |
| return errs; |
| } |
| |
| void merge_switch_to_result(struct merge_options *opt, |
| struct tree *head, |
| struct merge_result *result, |
| int update_worktree_and_index, |
| int display_update_msgs) |
| { |
| assert(opt->priv == NULL); |
| if (result->clean >= 0 && update_worktree_and_index) { |
| const char *filename; |
| FILE *fp; |
| |
| trace2_region_enter("merge", "checkout", opt->repo); |
| if (checkout(opt, head, result->tree)) { |
| /* failure to function */ |
| result->clean = -1; |
| return; |
| } |
| trace2_region_leave("merge", "checkout", opt->repo); |
| |
| trace2_region_enter("merge", "record_conflicted", opt->repo); |
| opt->priv = result->priv; |
| if (record_conflicted_index_entries(opt)) { |
| /* failure to function */ |
| opt->priv = NULL; |
| result->clean = -1; |
| return; |
| } |
| opt->priv = NULL; |
| trace2_region_leave("merge", "record_conflicted", opt->repo); |
| |
| trace2_region_enter("merge", "write_auto_merge", opt->repo); |
| filename = git_path_auto_merge(opt->repo); |
| fp = xfopen(filename, "w"); |
| fprintf(fp, "%s\n", oid_to_hex(&result->tree->object.oid)); |
| fclose(fp); |
| trace2_region_leave("merge", "write_auto_merge", opt->repo); |
| } |
| |
| if (display_update_msgs) { |
| struct merge_options_internal *opti = result->priv; |
| struct hashmap_iter iter; |
| struct strmap_entry *e; |
| struct string_list olist = STRING_LIST_INIT_NODUP; |
| int i; |
| |
| if (opt->record_conflict_msgs_as_headers) |
| BUG("Either display conflict messages or record them as headers, not both"); |
| |
| trace2_region_enter("merge", "display messages", opt->repo); |
| |
| /* Hack to pre-allocate olist to the desired size */ |
| ALLOC_GROW(olist.items, strmap_get_size(&opti->output), |
| olist.alloc); |
| |
| /* Put every entry from output into olist, then sort */ |
| strmap_for_each_entry(&opti->output, &iter, e) { |
| string_list_append(&olist, e->key)->util = e->value; |
| } |
| string_list_sort(&olist); |
| |
| /* Iterate over the items, printing them */ |
| for (i = 0; i < olist.nr; ++i) { |
| struct strbuf *sb = olist.items[i].util; |
| |
| printf("%s", sb->buf); |
| } |
| string_list_clear(&olist, 0); |
| |
| /* Also include needed rename limit adjustment now */ |
| diff_warn_rename_limit("merge.renamelimit", |
| opti->renames.needed_limit, 0); |
| |
| trace2_region_leave("merge", "display messages", opt->repo); |
| } |
| |
| merge_finalize(opt, result); |
| } |
| |
| void merge_finalize(struct merge_options *opt, |
| struct merge_result *result) |
| { |
| struct merge_options_internal *opti = result->priv; |
| |
| if (opt->renormalize) |
| git_attr_set_direction(GIT_ATTR_CHECKIN); |
| assert(opt->priv == NULL); |
| |
| clear_or_reinit_internal_opts(opti, 0); |
| FREE_AND_NULL(opti); |
| } |
| |
| /*** Function Grouping: helper functions for merge_incore_*() ***/ |
| |
| static struct tree *shift_tree_object(struct repository *repo, |
| struct tree *one, struct tree *two, |
| const char *subtree_shift) |
| { |
| struct object_id shifted; |
| |
| if (!*subtree_shift) { |
| shift_tree(repo, &one->object.oid, &two->object.oid, &shifted, 0); |
| } else { |
| shift_tree_by(repo, &one->object.oid, &two->object.oid, &shifted, |
| subtree_shift); |
| } |
| if (oideq(&two->object.oid, &shifted)) |
| return two; |
| return lookup_tree(repo, &shifted); |
| } |
| |
| static inline void set_commit_tree(struct commit *c, struct tree *t) |
| { |
| c->maybe_tree = t; |
| } |
| |
| static struct commit *make_virtual_commit(struct repository *repo, |
| struct tree *tree, |
| const char *comment) |
| { |
| struct commit *commit = alloc_commit_node(repo); |
| |
| set_merge_remote_desc(commit, comment, (struct object *)commit); |
| set_commit_tree(commit, tree); |
| commit->object.parsed = 1; |
| return commit; |
| } |
| |
| static void merge_start(struct merge_options *opt, struct merge_result *result) |
| { |
| struct rename_info *renames; |
| int i; |
| struct mem_pool *pool = NULL; |
| |
| /* Sanity checks on opt */ |
| trace2_region_enter("merge", "sanity checks", opt->repo); |
| assert(opt->repo); |
| |
| assert(opt->branch1 && opt->branch2); |
| |
| assert(opt->detect_directory_renames >= MERGE_DIRECTORY_RENAMES_NONE && |
| opt->detect_directory_renames <= MERGE_DIRECTORY_RENAMES_TRUE); |
| assert(opt->rename_limit >= -1); |
| assert(opt->rename_score >= 0 && opt->rename_score <= MAX_SCORE); |
| assert(opt->show_rename_progress >= 0 && opt->show_rename_progress <= 1); |
| |
| assert(opt->xdl_opts >= 0); |
| assert(opt->recursive_variant >= MERGE_VARIANT_NORMAL && |
| opt->recursive_variant <= MERGE_VARIANT_THEIRS); |
| |
| if (opt->msg_header_prefix) |
| assert(opt->record_conflict_msgs_as_headers); |
| |
| /* |
| * detect_renames, verbosity, buffer_output, and obuf are ignored |
| * fields that were used by "recursive" rather than "ort" -- but |
| * sanity check them anyway. |
| */ |
| assert(opt->detect_renames >= -1 && |
| opt->detect_renames <= DIFF_DETECT_COPY); |
| assert(opt->verbosity >= 0 && opt->verbosity <= 5); |
| assert(opt->buffer_output <= 2); |
| assert(opt->obuf.len == 0); |
| |
| assert(opt->priv == NULL); |
| if (result->_properly_initialized != 0 && |
| result->_properly_initialized != RESULT_INITIALIZED) |
| BUG("struct merge_result passed to merge_incore_*recursive() must be zeroed or filled with values from a previous run"); |
| assert(!!result->priv == !!result->_properly_initialized); |
| if (result->priv) { |
| opt->priv = result->priv; |
| result->priv = NULL; |
| /* |
| * opt->priv non-NULL means we had results from a previous |
| * run; do a few sanity checks that user didn't mess with |
| * it in an obvious fashion. |
| */ |
| assert(opt->priv->call_depth == 0); |
| assert(!opt->priv->toplevel_dir || |
| 0 == strlen(opt->priv->toplevel_dir)); |
| } |
| trace2_region_leave("merge", "sanity checks", opt->repo); |
| |
| /* Default to histogram diff. Actually, just hardcode it...for now. */ |
| opt->xdl_opts = DIFF_WITH_ALG(opt, HISTOGRAM_DIFF); |
| |
| /* Handle attr direction stuff for renormalization */ |
| if (opt->renormalize) |
| git_attr_set_direction(GIT_ATTR_CHECKOUT); |
| |
| /* Initialization of opt->priv, our internal merge data */ |
| trace2_region_enter("merge", "allocate/init", opt->repo); |
| if (opt->priv) { |
| clear_or_reinit_internal_opts(opt->priv, 1); |
| trace2_region_leave("merge", "allocate/init", opt->repo); |
| return; |
| } |
| opt->priv = xcalloc(1, sizeof(*opt->priv)); |
| |
| /* Initialization of various renames fields */ |
| renames = &opt->priv->renames; |
| mem_pool_init(&opt->priv->pool, 0); |
| pool = &opt->priv->pool; |
| for (i = MERGE_SIDE1; i <= MERGE_SIDE2; i++) { |
| strintmap_init_with_options(&renames->dirs_removed[i], |
| NOT_RELEVANT, pool, 0); |
| strmap_init_with_options(&renames->dir_rename_count[i], |
| NULL, 1); |
| strmap_init_with_options(&renames->dir_renames[i], |
| NULL, 0); |
| /* |
| * relevant_sources uses -1 for the default, because we need |
| * to be able to distinguish not-in-strintmap from valid |
| * relevant_source values from enum file_rename_relevance. |
| * In particular, possibly_cache_new_pair() expects a negative |
| * value for not-found entries. |
| */ |
| strintmap_init_with_options(&renames->relevant_sources[i], |
| -1 /* explicitly invalid */, |
| pool, 0); |
| strmap_init_with_options(&renames->cached_pairs[i], |
| NULL, 1); |
| strset_init_with_options(&renames->cached_irrelevant[i], |
| NULL, 1); |
| strset_init_with_options(&renames->cached_target_names[i], |
| NULL, 0); |
| } |
| for (i = MERGE_SIDE1; i <= MERGE_SIDE2; i++) { |
| strintmap_init_with_options(&renames->deferred[i].possible_trivial_merges, |
| 0, pool, 0); |
| strset_init_with_options(&renames->deferred[i].target_dirs, |
| pool, 1); |
| renames->deferred[i].trivial_merges_okay = 1; /* 1 == maybe */ |
| } |
| |
| /* |
| * Although we initialize opt->priv->paths with strdup_strings=0, |
| * that's just to avoid making yet another copy of an allocated |
| * string. Putting the entry into paths means we are taking |
| * ownership, so we will later free it. |
| * |
| * In contrast, conflicted just has a subset of keys from paths, so |
| * we don't want to free those (it'd be a duplicate free). |
| */ |
| strmap_init_with_options(&opt->priv->paths, pool, 0); |
| strmap_init_with_options(&opt->priv->conflicted, pool, 0); |
| |
| /* |
| * keys & strbufs in output will sometimes need to outlive "paths", |
| * so it will have a copy of relevant keys. It's probably a small |
| * subset of the overall paths that have special output. |
| */ |
| strmap_init(&opt->priv->output); |
| |
| trace2_region_leave("merge", "allocate/init", opt->repo); |
| } |
| |
| static void merge_check_renames_reusable(struct merge_options *opt, |
| struct merge_result *result, |
| struct tree *merge_base, |
| struct tree *side1, |
| struct tree *side2) |
| { |
| struct rename_info *renames; |
| struct tree **merge_trees; |
| struct merge_options_internal *opti = result->priv; |
| |
| if (!opti) |
| return; |
| |
| renames = &opti->renames; |
| merge_trees = renames->merge_trees; |
| |
| /* |
| * Handle case where previous merge operation did not want cache to |
| * take effect, e.g. because rename/rename(1to1) makes it invalid. |
| */ |
| if (!merge_trees[0]) { |
| assert(!merge_trees[0] && !merge_trees[1] && !merge_trees[2]); |
| renames->cached_pairs_valid_side = 0; /* neither side valid */ |
| return; |
| } |
| |
| /* |
| * Handle other cases; note that merge_trees[0..2] will only |
| * be NULL if opti is, or if all three were manually set to |
| * NULL by e.g. rename/rename(1to1) handling. |
| */ |
| assert(merge_trees[0] && merge_trees[1] && merge_trees[2]); |
| |
| /* Check if we meet a condition for re-using cached_pairs */ |
| if (oideq(&merge_base->object.oid, &merge_trees[2]->object.oid) && |
| oideq(&side1->object.oid, &result->tree->object.oid)) |
| renames->cached_pairs_valid_side = MERGE_SIDE1; |
| else if (oideq(&merge_base->object.oid, &merge_trees[1]->object.oid) && |
| oideq(&side2->object.oid, &result->tree->object.oid)) |
| renames->cached_pairs_valid_side = MERGE_SIDE2; |
| else |
| renames->cached_pairs_valid_side = 0; /* neither side valid */ |
| } |
| |
| /*** Function Grouping: merge_incore_*() and their internal variants ***/ |
| |
| /* |
| * Originally from merge_trees_internal(); heavily adapted, though. |
| */ |
| static void merge_ort_nonrecursive_internal(struct merge_options *opt, |
| struct tree *merge_base, |
| struct tree *side1, |
| struct tree *side2, |
| struct merge_result *result) |
| { |
| struct object_id working_tree_oid; |
| |
| if (opt->subtree_shift) { |
| side2 = shift_tree_object(opt->repo, side1, side2, |
| opt->subtree_shift); |
| merge_base = shift_tree_object(opt->repo, side1, merge_base, |
| opt->subtree_shift); |
| } |
| |
| redo: |
| trace2_region_enter("merge", "collect_merge_info", opt->repo); |
| if (collect_merge_info(opt, merge_base, side1, side2) != 0) { |
| /* |
| * TRANSLATORS: The %s arguments are: 1) tree hash of a merge |
| * base, and 2-3) the trees for the two trees we're merging. |
| */ |
| err(opt, _("collecting merge info failed for trees %s, %s, %s"), |
| oid_to_hex(&merge_base->object.oid), |
| oid_to_hex(&side1->object.oid), |
| oid_to_hex(&side2->object.oid)); |
| result->clean = -1; |
| return; |
| } |
| trace2_region_leave("merge", "collect_merge_info", opt->repo); |
| |
| trace2_region_enter("merge", "renames", opt->repo); |
| result->clean = detect_and_process_renames(opt, merge_base, |
| side1, side2); |
| trace2_region_leave("merge", "renames", opt->repo); |
| if (opt->priv->renames.redo_after_renames == 2) { |
| trace2_region_enter("merge", "reset_maps", opt->repo); |
| clear_or_reinit_internal_opts(opt->priv, 1); |
| trace2_region_leave("merge", "reset_maps", opt->repo); |
| goto redo; |
| } |
| |
| trace2_region_enter("merge", "process_entries", opt->repo); |
| process_entries(opt, &working_tree_oid); |
| trace2_region_leave("merge", "process_entries", opt->repo); |
| |
| /* Set return values */ |
| result->path_messages = &opt->priv->output; |
| result->tree = parse_tree_indirect(&working_tree_oid); |
| /* existence of conflicted entries implies unclean */ |
| result->clean &= strmap_empty(&opt->priv->conflicted); |
| if (!opt->priv->call_depth) { |
| result->priv = opt->priv; |
| result->_properly_initialized = RESULT_INITIALIZED; |
| opt->priv = NULL; |
| } |
| } |
| |
| /* |
| * Originally from merge_recursive_internal(); somewhat adapted, though. |
| */ |
| static void merge_ort_internal(struct merge_options *opt, |
| struct commit_list *merge_bases, |
| struct commit *h1, |
| struct commit *h2, |
| struct merge_result *result) |
| { |
| struct commit *next; |
| struct commit *merged_merge_bases; |
| const char *ancestor_name; |
| struct strbuf merge_base_abbrev = STRBUF_INIT; |
| |
| if (!merge_bases) { |
| merge_bases = get_merge_bases(h1, h2); |
| /* See merge-ort.h:merge_incore_recursive() declaration NOTE */ |
| merge_bases = reverse_commit_list(merge_bases); |
| } |
| |
| merged_merge_bases = pop_commit(&merge_bases); |
| if (!merged_merge_bases) { |
| /* if there is no common ancestor, use an empty tree */ |
| struct tree *tree; |
| |
| tree = lookup_tree(opt->repo, opt->repo->hash_algo->empty_tree); |
| merged_merge_bases = make_virtual_commit(opt->repo, tree, |
| "ancestor"); |
| ancestor_name = "empty tree"; |
| } else if (merge_bases) { |
| ancestor_name = "merged common ancestors"; |
| } else { |
| strbuf_add_unique_abbrev(&merge_base_abbrev, |
| &merged_merge_bases->object.oid, |
| DEFAULT_ABBREV); |
| ancestor_name = merge_base_abbrev.buf; |
| } |
| |
| for (next = pop_commit(&merge_bases); next; |
| next = pop_commit(&merge_bases)) { |
| const char *saved_b1, *saved_b2; |
| struct commit *prev = merged_merge_bases; |
| |
| opt->priv->call_depth++; |
| /* |
| * When the merge fails, the result contains files |
| * with conflict markers. The cleanness flag is |
| * ignored (unless indicating an error), it was never |
| * actually used, as result of merge_trees has always |
| * overwritten it: the committed "conflicts" were |
| * already resolved. |
| */ |
| saved_b1 = opt->branch1; |
| saved_b2 = opt->branch2; |
| opt->branch1 = "Temporary merge branch 1"; |
| opt->branch2 = "Temporary merge branch 2"; |
| merge_ort_internal(opt, NULL, prev, next, result); |
| if (result->clean < 0) |
| return; |
| opt->branch1 = saved_b1; |
| opt->branch2 = saved_b2; |
| opt->priv->call_depth--; |
| |
| merged_merge_bases = make_virtual_commit(opt->repo, |
| result->tree, |
| "merged tree"); |
| commit_list_insert(prev, &merged_merge_bases->parents); |
| commit_list_insert(next, &merged_merge_bases->parents->next); |
| |
| clear_or_reinit_internal_opts(opt->priv, 1); |
| } |
| |
| opt->ancestor = ancestor_name; |
| merge_ort_nonrecursive_internal(opt, |
| repo_get_commit_tree(opt->repo, |
| merged_merge_bases), |
| repo_get_commit_tree(opt->repo, h1), |
| repo_get_commit_tree(opt->repo, h2), |
| result); |
| strbuf_release(&merge_base_abbrev); |
| opt->ancestor = NULL; /* avoid accidental re-use of opt->ancestor */ |
| } |
| |
| void merge_incore_nonrecursive(struct merge_options *opt, |
| struct tree *merge_base, |
| struct tree *side1, |
| struct tree *side2, |
| struct merge_result *result) |
| { |
| trace2_region_enter("merge", "incore_nonrecursive", opt->repo); |
| |
| trace2_region_enter("merge", "merge_start", opt->repo); |
| assert(opt->ancestor != NULL); |
| merge_check_renames_reusable(opt, result, merge_base, side1, side2); |
| merge_start(opt, result); |
| /* |
| * Record the trees used in this merge, so if there's a next merge in |
| * a cherry-pick or rebase sequence it might be able to take advantage |
| * of the cached_pairs in that next merge. |
| */ |
| opt->priv->renames.merge_trees[0] = merge_base; |
| opt->priv->renames.merge_trees[1] = side1; |
| opt->priv->renames.merge_trees[2] = side2; |
| trace2_region_leave("merge", "merge_start", opt->repo); |
| |
| merge_ort_nonrecursive_internal(opt, merge_base, side1, side2, result); |
| trace2_region_leave("merge", "incore_nonrecursive", opt->repo); |
| } |
| |
| void merge_incore_recursive(struct merge_options *opt, |
| struct commit_list *merge_bases, |
| struct commit *side1, |
| struct commit *side2, |
| struct merge_result *result) |
| { |
| trace2_region_enter("merge", "incore_recursive", opt->repo); |
| |
| /* We set the ancestor label based on the merge_bases */ |
| assert(opt->ancestor == NULL); |
| |
| trace2_region_enter("merge", "merge_start", opt->repo); |
| merge_start(opt, result); |
| trace2_region_leave("merge", "merge_start", opt->repo); |
| |
| merge_ort_internal(opt, merge_bases, side1, side2, result); |
| trace2_region_leave("merge", "incore_recursive", opt->repo); |
| } |