| # Test framework for git. See t/README for usage. |
| # |
| # Copyright (c) 2005 Junio C Hamano |
| # |
| # This program is free software: you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation, either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see https://www.gnu.org/licenses/ . |
| |
| # Test the binaries we have just built. The tests are kept in |
| # t/ subdirectory and are run in 'trash directory' subdirectory. |
| if test -z "$TEST_DIRECTORY" |
| then |
| # ensure that TEST_DIRECTORY is an absolute path so that it |
| # is valid even if the current working directory is changed |
| TEST_DIRECTORY=$(pwd) |
| else |
| # The TEST_DIRECTORY will always be the path to the "t" |
| # directory in the git.git checkout. This is overridden by |
| # e.g. t/lib-subtest.sh, but only because its $(pwd) is |
| # different. Those tests still set "$TEST_DIRECTORY" to the |
| # same path. |
| # |
| # See use of "$GIT_BUILD_DIR" and "$TEST_DIRECTORY" below for |
| # hard assumptions about "$GIT_BUILD_DIR/t" existing and being |
| # the "$TEST_DIRECTORY", and e.g. "$TEST_DIRECTORY/helper" |
| # needing to exist. |
| TEST_DIRECTORY=$(cd "$TEST_DIRECTORY" && pwd) || exit 1 |
| fi |
| if test -z "$TEST_OUTPUT_DIRECTORY" |
| then |
| # Similarly, override this to store the test-results subdir |
| # elsewhere |
| TEST_OUTPUT_DIRECTORY=$TEST_DIRECTORY |
| fi |
| GIT_BUILD_DIR="${TEST_DIRECTORY%/t}" |
| if test "$TEST_DIRECTORY" = "$GIT_BUILD_DIR" |
| then |
| echo "PANIC: Running in a $TEST_DIRECTORY that doesn't end in '/t'?" >&2 |
| exit 1 |
| fi |
| if test -f "$GIT_BUILD_DIR/GIT-BUILD-DIR" |
| then |
| GIT_BUILD_DIR="$(cat "$GIT_BUILD_DIR/GIT-BUILD-DIR")" || exit 1 |
| # On Windows, we must convert Windows paths lest they contain a colon |
| case "$(uname -s)" in |
| *MINGW*) |
| GIT_BUILD_DIR="$(cygpath -au "$GIT_BUILD_DIR")" |
| ;; |
| esac |
| fi |
| |
| # Prepend a string to a VAR using an arbitrary ":" delimiter, not |
| # adding the delimiter if VAR or VALUE is empty. I.e. a generalized: |
| # |
| # VAR=$1${VAR:+${1:+$2}$VAR} |
| # |
| # Usage (using ":" as the $2 delimiter): |
| # |
| # prepend_var VAR : VALUE |
| prepend_var () { |
| eval "$1=\"$3\${$1:+${3:+$2}\$$1}\"" |
| } |
| |
| # If [AL]SAN is in effect we want to abort so that we notice |
| # problems. The GIT_SAN_OPTIONS variable can be used to set common |
| # defaults shared between [AL]SAN_OPTIONS. |
| prepend_var GIT_SAN_OPTIONS : abort_on_error=1 |
| prepend_var GIT_SAN_OPTIONS : strip_path_prefix="$GIT_BUILD_DIR/" |
| |
| # If we were built with ASAN, it may complain about leaks |
| # of program-lifetime variables. Disable it by default to lower |
| # the noise level. This needs to happen at the start of the script, |
| # before we even do our "did we build git yet" check (since we don't |
| # want that one to complain to stderr). |
| prepend_var ASAN_OPTIONS : $GIT_SAN_OPTIONS |
| prepend_var ASAN_OPTIONS : detect_leaks=0 |
| export ASAN_OPTIONS |
| |
| prepend_var LSAN_OPTIONS : $GIT_SAN_OPTIONS |
| prepend_var LSAN_OPTIONS : fast_unwind_on_malloc=0 |
| export LSAN_OPTIONS |
| |
| prepend_var UBSAN_OPTIONS : $GIT_SAN_OPTIONS |
| export UBSAN_OPTIONS |
| |
| if test ! -f "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS |
| then |
| echo >&2 'error: GIT-BUILD-OPTIONS missing (has Git been built?).' |
| exit 1 |
| fi |
| . "$GIT_BUILD_DIR"/GIT-BUILD-OPTIONS |
| export PERL_PATH SHELL_PATH |
| |
| # In t0000, we need to override test directories of nested testcases. In case |
| # the developer has TEST_OUTPUT_DIRECTORY part of his build options, then we'd |
| # reset this value to instead contain what the developer has specified. We thus |
| # have this knob to allow overriding the directory. |
| if test -n "${TEST_OUTPUT_DIRECTORY_OVERRIDE}" |
| then |
| TEST_OUTPUT_DIRECTORY="${TEST_OUTPUT_DIRECTORY_OVERRIDE}" |
| fi |
| |
| # Disallow the use of abbreviated options in the test suite by default |
| if test -z "${GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS}" |
| then |
| GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS=true |
| export GIT_TEST_DISALLOW_ABBREVIATED_OPTIONS |
| fi |
| |
| # Explicitly set the default branch name for testing, to avoid the |
| # transitory "git init" warning under --verbose. |
| : ${GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME:=master} |
| export GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME |
| |
| ################################################################ |
| # It appears that people try to run tests without building... |
| "${GIT_TEST_INSTALLED:-$GIT_BUILD_DIR}/git$X" >/dev/null |
| if test $? != 1 |
| then |
| if test -n "$GIT_TEST_INSTALLED" |
| then |
| echo >&2 "error: there is no working Git at '$GIT_TEST_INSTALLED'" |
| else |
| echo >&2 'error: you do not seem to have built git yet.' |
| fi |
| exit 1 |
| fi |
| |
| store_arg_to= |
| opt_required_arg= |
| # $1: option string |
| # $2: name of the var where the arg will be stored |
| mark_option_requires_arg () { |
| if test -n "$opt_required_arg" |
| then |
| echo "error: options that require args cannot be bundled" \ |
| "together: '$opt_required_arg' and '$1'" >&2 |
| exit 1 |
| fi |
| opt_required_arg=$1 |
| store_arg_to=$2 |
| } |
| |
| # These functions can be overridden e.g. to output JUnit XML |
| start_test_output () { :; } |
| start_test_case_output () { :; } |
| finalize_test_case_output () { :; } |
| finalize_test_output () { :; } |
| |
| parse_option () { |
| local opt="$1" |
| |
| case "$opt" in |
| -d|--d|--de|--deb|--debu|--debug) |
| debug=t ;; |
| -i|--i|--im|--imm|--imme|--immed|--immedi|--immedia|--immediat|--immediate) |
| immediate=t ;; |
| -l|--l|--lo|--lon|--long|--long-|--long-t|--long-te|--long-tes|--long-test|--long-tests) |
| GIT_TEST_LONG=t; export GIT_TEST_LONG ;; |
| -r) |
| mark_option_requires_arg "$opt" run_list |
| ;; |
| --run=*) |
| run_list=${opt#--*=} ;; |
| -h|--h|--he|--hel|--help) |
| help=t ;; |
| -v|--v|--ve|--ver|--verb|--verbo|--verbos|--verbose) |
| verbose=t ;; |
| --verbose-only=*) |
| verbose_only=${opt#--*=} |
| ;; |
| -q|--q|--qu|--qui|--quie|--quiet) |
| # Ignore --quiet under a TAP::Harness. Saying how many tests |
| # passed without the ok/not ok details is always an error. |
| test -z "$HARNESS_ACTIVE" && quiet=t ;; |
| --with-dashes) |
| with_dashes=t ;; |
| --no-bin-wrappers) |
| no_bin_wrappers=t ;; |
| --no-color) |
| color= ;; |
| --va|--val|--valg|--valgr|--valgri|--valgrin|--valgrind) |
| valgrind=memcheck |
| tee=t |
| ;; |
| --valgrind=*) |
| valgrind=${opt#--*=} |
| tee=t |
| ;; |
| --valgrind-only=*) |
| valgrind_only=${opt#--*=} |
| tee=t |
| ;; |
| --tee) |
| tee=t ;; |
| --root=*) |
| root=${opt#--*=} ;; |
| --chain-lint) |
| GIT_TEST_CHAIN_LINT=1 ;; |
| --no-chain-lint) |
| GIT_TEST_CHAIN_LINT=0 ;; |
| -x) |
| trace=t ;; |
| -V|--verbose-log) |
| verbose_log=t |
| tee=t |
| ;; |
| --write-junit-xml) |
| . "$TEST_DIRECTORY/test-lib-junit.sh" |
| ;; |
| --github-workflow-markup) |
| . "$TEST_DIRECTORY/test-lib-github-workflow-markup.sh" |
| ;; |
| --stress) |
| stress=t ;; |
| --stress=*) |
| echo "error: --stress does not accept an argument: '$opt'" >&2 |
| echo "did you mean --stress-jobs=${opt#*=} or --stress-limit=${opt#*=}?" >&2 |
| exit 1 |
| ;; |
| --stress-jobs=*) |
| stress=t; |
| stress_jobs=${opt#--*=} |
| case "$stress_jobs" in |
| *[!0-9]*|0*|"") |
| echo "error: --stress-jobs=<N> requires the number of jobs to run" >&2 |
| exit 1 |
| ;; |
| *) # Good. |
| ;; |
| esac |
| ;; |
| --stress-limit=*) |
| stress=t; |
| stress_limit=${opt#--*=} |
| case "$stress_limit" in |
| *[!0-9]*|0*|"") |
| echo "error: --stress-limit=<N> requires the number of repetitions" >&2 |
| exit 1 |
| ;; |
| *) # Good. |
| ;; |
| esac |
| ;; |
| --invert-exit-code) |
| invert_exit_code=t |
| ;; |
| *) |
| echo "error: unknown test option '$opt'" >&2; exit 1 ;; |
| esac |
| } |
| |
| # Parse options while taking care to leave $@ intact, so we will still |
| # have all the original command line options when executing the test |
| # script again for '--tee' and '--verbose-log' later. |
| for opt |
| do |
| if test -n "$store_arg_to" |
| then |
| eval $store_arg_to=\$opt |
| store_arg_to= |
| opt_required_arg= |
| continue |
| fi |
| |
| case "$opt" in |
| --*|-?) |
| parse_option "$opt" ;; |
| -?*) |
| # bundled short options must be fed separately to parse_option |
| opt=${opt#-} |
| while test -n "$opt" |
| do |
| extra=${opt#?} |
| this=${opt%$extra} |
| opt=$extra |
| parse_option "-$this" |
| done |
| ;; |
| *) |
| echo "error: unknown test option '$opt'" >&2; exit 1 ;; |
| esac |
| done |
| if test -n "$store_arg_to" |
| then |
| echo "error: $opt_required_arg requires an argument" >&2 |
| exit 1 |
| fi |
| |
| if test -n "$valgrind_only" |
| then |
| test -z "$valgrind" && valgrind=memcheck |
| test -z "$verbose" && verbose_only="$valgrind_only" |
| elif test -n "$valgrind" |
| then |
| test -z "$verbose_log" && verbose=t |
| fi |
| |
| if test -n "$stress" |
| then |
| verbose=t |
| trace=t |
| immediate=t |
| fi |
| |
| TEST_STRESS_JOB_SFX="${GIT_TEST_STRESS_JOB_NR:+.stress-$GIT_TEST_STRESS_JOB_NR}" |
| TEST_NAME="$(basename "$0" .sh)" |
| TEST_NUMBER="${TEST_NAME%%-*}" |
| TEST_NUMBER="${TEST_NUMBER#t}" |
| TEST_RESULTS_DIR="$TEST_OUTPUT_DIRECTORY/test-results" |
| TEST_RESULTS_BASE="$TEST_RESULTS_DIR/$TEST_NAME$TEST_STRESS_JOB_SFX" |
| TEST_RESULTS_SAN_FILE_PFX=trace |
| TEST_RESULTS_SAN_DIR_SFX=leak |
| TEST_RESULTS_SAN_FILE= |
| TEST_RESULTS_SAN_DIR="$TEST_RESULTS_DIR/$TEST_NAME.$TEST_RESULTS_SAN_DIR_SFX" |
| TEST_RESULTS_SAN_DIR_NR_LEAKS_STARTUP= |
| TRASH_DIRECTORY="trash directory.$TEST_NAME$TEST_STRESS_JOB_SFX" |
| test -n "$root" && TRASH_DIRECTORY="$root/$TRASH_DIRECTORY" |
| case "$TRASH_DIRECTORY" in |
| /*) ;; # absolute path is good |
| *) TRASH_DIRECTORY="$TEST_OUTPUT_DIRECTORY/$TRASH_DIRECTORY" ;; |
| esac |
| |
| # Utility functions using $TEST_RESULTS_* variables |
| nr_san_dir_leaks_ () { |
| # stderr piped to /dev/null because the directory may have |
| # been "rmdir"'d already. |
| find "$TEST_RESULTS_SAN_DIR" \ |
| -type f \ |
| -name "$TEST_RESULTS_SAN_FILE_PFX.*" 2>/dev/null | |
| xargs grep -lv "Unable to get registers from thread" | |
| wc -l |
| } |
| |
| # If --stress was passed, run this test repeatedly in several parallel loops. |
| if test "$GIT_TEST_STRESS_STARTED" = "done" |
| then |
| : # Don't stress test again. |
| elif test -n "$stress" |
| then |
| if test -n "$stress_jobs" |
| then |
| job_count=$stress_jobs |
| elif test -n "$GIT_TEST_STRESS_LOAD" |
| then |
| job_count="$GIT_TEST_STRESS_LOAD" |
| elif job_count=$(getconf _NPROCESSORS_ONLN 2>/dev/null) && |
| test -n "$job_count" |
| then |
| job_count=$((2 * $job_count)) |
| else |
| job_count=8 |
| fi |
| |
| mkdir -p "$TEST_RESULTS_DIR" |
| stressfail="$TEST_RESULTS_BASE.stress-failed" |
| rm -f "$stressfail" |
| |
| stress_exit=0 |
| trap ' |
| kill $job_pids 2>/dev/null |
| wait |
| stress_exit=1 |
| ' TERM INT HUP |
| |
| job_pids= |
| job_nr=0 |
| while test $job_nr -lt "$job_count" |
| do |
| ( |
| GIT_TEST_STRESS_STARTED=done |
| GIT_TEST_STRESS_JOB_NR=$job_nr |
| export GIT_TEST_STRESS_STARTED GIT_TEST_STRESS_JOB_NR |
| |
| trap ' |
| kill $test_pid 2>/dev/null |
| wait |
| exit 1 |
| ' TERM INT |
| |
| cnt=1 |
| while ! test -e "$stressfail" && |
| { test -z "$stress_limit" || |
| test $cnt -le $stress_limit ; } |
| do |
| $TEST_SHELL_PATH "$0" "$@" >"$TEST_RESULTS_BASE.stress-$job_nr.out" 2>&1 & |
| test_pid=$! |
| |
| if wait $test_pid |
| then |
| printf "OK %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt |
| else |
| echo $GIT_TEST_STRESS_JOB_NR >>"$stressfail" |
| printf "FAIL %2d.%d\n" $GIT_TEST_STRESS_JOB_NR $cnt |
| fi |
| cnt=$(($cnt + 1)) |
| done |
| ) & |
| job_pids="$job_pids $!" |
| job_nr=$(($job_nr + 1)) |
| done |
| |
| wait |
| |
| if test -f "$stressfail" |
| then |
| stress_exit=1 |
| echo "Log(s) of failed test run(s):" |
| for failed_job_nr in $(sort -n "$stressfail") |
| do |
| echo "Contents of '$TEST_RESULTS_BASE.stress-$failed_job_nr.out':" |
| cat "$TEST_RESULTS_BASE.stress-$failed_job_nr.out" |
| done |
| rm -rf "$TRASH_DIRECTORY.stress-failed" |
| # Move the last one. |
| mv "$TRASH_DIRECTORY.stress-$failed_job_nr" "$TRASH_DIRECTORY.stress-failed" |
| fi |
| |
| exit $stress_exit |
| fi |
| |
| # if --tee was passed, write the output not only to the terminal, but |
| # additionally to the file test-results/$BASENAME.out, too. |
| if test "$GIT_TEST_TEE_STARTED" = "done" |
| then |
| : # do not redirect again |
| elif test -n "$tee" |
| then |
| mkdir -p "$TEST_RESULTS_DIR" |
| |
| # Make this filename available to the sub-process in case it is using |
| # --verbose-log. |
| GIT_TEST_TEE_OUTPUT_FILE=$TEST_RESULTS_BASE.out |
| export GIT_TEST_TEE_OUTPUT_FILE |
| |
| # Truncate before calling "tee -a" to get rid of the results |
| # from any previous runs. |
| >"$GIT_TEST_TEE_OUTPUT_FILE" |
| |
| (GIT_TEST_TEE_STARTED=done ${TEST_SHELL_PATH} "$0" "$@" 2>&1; |
| echo $? >"$TEST_RESULTS_BASE.exit") | tee -a "$GIT_TEST_TEE_OUTPUT_FILE" |
| test "$(cat "$TEST_RESULTS_BASE.exit")" = 0 |
| exit |
| fi |
| |
| if test -n "$trace" && test -n "$test_untraceable" |
| then |
| # '-x' tracing requested, but this test script can't be reliably |
| # traced, unless it is run with a Bash version supporting |
| # BASH_XTRACEFD (introduced in Bash v4.1). |
| # |
| # Perform this version check _after_ the test script was |
| # potentially re-executed with $TEST_SHELL_PATH for '--tee' or |
| # '--verbose-log', so the right shell is checked and the |
| # warning is issued only once. |
| if test -n "$BASH_VERSION" && eval ' |
| test ${BASH_VERSINFO[0]} -gt 4 || { |
| test ${BASH_VERSINFO[0]} -eq 4 && |
| test ${BASH_VERSINFO[1]} -ge 1 |
| } |
| ' |
| then |
| : Executed by a Bash version supporting BASH_XTRACEFD. Good. |
| else |
| echo >&2 "warning: ignoring -x; '$0' is untraceable without BASH_XTRACEFD" |
| trace= |
| fi |
| fi |
| if test -n "$trace" && test -z "$verbose_log" |
| then |
| verbose=t |
| fi |
| |
| # Since bash 5.0, checkwinsize is enabled by default which does |
| # update the COLUMNS variable every time a non-builtin command |
| # completes, even for non-interactive shells. |
| # Disable that since we are aiming for repeatability. |
| test -n "$BASH_VERSION" && shopt -u checkwinsize 2>/dev/null |
| |
| # For repeatability, reset the environment to known value. |
| # TERM is sanitized below, after saving color control sequences. |
| LANG=C |
| LC_ALL=C |
| PAGER=cat |
| TZ=UTC |
| COLUMNS=80 |
| export LANG LC_ALL PAGER TZ COLUMNS |
| EDITOR=: |
| |
| # A call to "unset" with no arguments causes at least Solaris 10 |
| # /usr/xpg4/bin/sh and /bin/ksh to bail out. So keep the unsets |
| # deriving from the command substitution clustered with the other |
| # ones. |
| unset VISUAL EMAIL LANGUAGE $("$PERL_PATH" -e ' |
| my @env = keys %ENV; |
| my $ok = join("|", qw( |
| TRACE |
| DEBUG |
| TEST |
| .*_TEST |
| PROVE |
| VALGRIND |
| UNZIP |
| PERF_ |
| CURL_VERBOSE |
| TRACE_CURL |
| )); |
| my @vars = grep(/^GIT_/ && !/^GIT_($ok)/o, @env); |
| print join("\n", @vars); |
| ') |
| unset XDG_CACHE_HOME |
| unset XDG_CONFIG_HOME |
| unset GITPERLLIB |
| unset GIT_TRACE2_PARENT_NAME |
| unset GIT_TRACE2_PARENT_SID |
| TEST_AUTHOR_LOCALNAME=author |
| TEST_AUTHOR_DOMAIN=example.com |
| GIT_AUTHOR_EMAIL=${TEST_AUTHOR_LOCALNAME}@${TEST_AUTHOR_DOMAIN} |
| GIT_AUTHOR_NAME='A U Thor' |
| GIT_AUTHOR_DATE='1112354055 +0200' |
| TEST_COMMITTER_LOCALNAME=committer |
| TEST_COMMITTER_DOMAIN=example.com |
| GIT_COMMITTER_EMAIL=${TEST_COMMITTER_LOCALNAME}@${TEST_COMMITTER_DOMAIN} |
| GIT_COMMITTER_NAME='C O Mitter' |
| GIT_COMMITTER_DATE='1112354055 +0200' |
| GIT_MERGE_VERBOSITY=5 |
| GIT_MERGE_AUTOEDIT=no |
| export GIT_MERGE_VERBOSITY GIT_MERGE_AUTOEDIT |
| export GIT_AUTHOR_EMAIL GIT_AUTHOR_NAME |
| export GIT_COMMITTER_EMAIL GIT_COMMITTER_NAME |
| export GIT_COMMITTER_DATE GIT_AUTHOR_DATE |
| export EDITOR |
| |
| GIT_DEFAULT_HASH="${GIT_TEST_DEFAULT_HASH:-sha1}" |
| export GIT_DEFAULT_HASH |
| GIT_DEFAULT_REF_FORMAT="${GIT_TEST_DEFAULT_REF_FORMAT:-files}" |
| export GIT_DEFAULT_REF_FORMAT |
| GIT_TEST_MERGE_ALGORITHM="${GIT_TEST_MERGE_ALGORITHM:-ort}" |
| export GIT_TEST_MERGE_ALGORITHM |
| |
| # Tests using GIT_TRACE typically don't want <timestamp> <file>:<line> output |
| GIT_TRACE_BARE=1 |
| export GIT_TRACE_BARE |
| |
| # Some tests scan the GIT_TRACE2_EVENT feed for events, but the |
| # default depth is 2, which frequently causes issues when the |
| # events are wrapped in new regions. Set it to a sufficiently |
| # large depth to avoid custom changes in the test suite. |
| GIT_TRACE2_EVENT_NESTING=100 |
| export GIT_TRACE2_EVENT_NESTING |
| |
| # Use specific version of the index file format |
| if test -n "${GIT_TEST_INDEX_VERSION:+isset}" |
| then |
| GIT_INDEX_VERSION="$GIT_TEST_INDEX_VERSION" |
| export GIT_INDEX_VERSION |
| fi |
| |
| if test -n "$GIT_TEST_PERL_FATAL_WARNINGS" |
| then |
| GIT_PERL_FATAL_WARNINGS=1 |
| export GIT_PERL_FATAL_WARNINGS |
| fi |
| |
| case $GIT_TEST_FSYNC in |
| '') |
| GIT_TEST_FSYNC=0 |
| export GIT_TEST_FSYNC |
| ;; |
| esac |
| |
| # Add libc MALLOC and MALLOC_PERTURB test only if we are not executing |
| # the test with valgrind and have not compiled with conflict SANITIZE |
| # options. |
| if test -n "$valgrind" || |
| test -n "$SANITIZE_ADDRESS" || |
| test -n "$SANITIZE_LEAK" || |
| test -n "$TEST_NO_MALLOC_CHECK" |
| then |
| setup_malloc_check () { |
| : nothing |
| } |
| teardown_malloc_check () { |
| : nothing |
| } |
| else |
| _USE_GLIBC_TUNABLES= |
| if _GLIBC_VERSION=$(getconf GNU_LIBC_VERSION 2>/dev/null) && |
| _GLIBC_VERSION=${_GLIBC_VERSION#"glibc "} && |
| expr 2.34 \<= "$_GLIBC_VERSION" >/dev/null |
| then |
| _USE_GLIBC_TUNABLES=YesPlease |
| fi |
| setup_malloc_check () { |
| local g |
| local t |
| MALLOC_CHECK_=3 MALLOC_PERTURB_=165 |
| export MALLOC_CHECK_ MALLOC_PERTURB_ |
| if test -n "$_USE_GLIBC_TUNABLES" |
| then |
| g= |
| LD_PRELOAD="libc_malloc_debug.so.0" |
| for t in \ |
| glibc.malloc.check=1 \ |
| glibc.malloc.perturb=165 |
| do |
| g="${g#:}:$t" |
| done |
| GLIBC_TUNABLES=$g |
| export LD_PRELOAD GLIBC_TUNABLES |
| fi |
| } |
| teardown_malloc_check () { |
| unset MALLOC_CHECK_ MALLOC_PERTURB_ |
| unset LD_PRELOAD GLIBC_TUNABLES |
| } |
| fi |
| |
| # Protect ourselves from common misconfiguration to export |
| # CDPATH into the environment |
| unset CDPATH |
| |
| unset GREP_OPTIONS |
| unset UNZIP |
| |
| case $(echo $GIT_TRACE |tr "[A-Z]" "[a-z]") in |
| 1|2|true) |
| GIT_TRACE=4 |
| ;; |
| esac |
| |
| # Line feed |
| LF=' |
| ' |
| |
| # Single quote |
| SQ=\' |
| |
| # UTF-8 ZERO WIDTH NON-JOINER, which HFS+ ignores |
| # when case-folding filenames |
| u200c=$(printf '\342\200\214') |
| |
| export _x05 _x35 LF u200c EMPTY_TREE EMPTY_BLOB ZERO_OID OID_REGEX |
| |
| test "x$TERM" != "xdumb" && ( |
| test -t 1 && |
| tput bold >/dev/null 2>&1 && |
| tput setaf 1 >/dev/null 2>&1 && |
| tput sgr0 >/dev/null 2>&1 |
| ) && |
| color=t |
| |
| if test -n "$color" |
| then |
| # Save the color control sequences now rather than run tput |
| # each time say_color() is called. This is done for two |
| # reasons: |
| # * TERM will be changed to dumb |
| # * HOME will be changed to a temporary directory and tput |
| # might need to read ~/.terminfo from the original HOME |
| # directory to get the control sequences |
| # Note: This approach assumes the control sequences don't end |
| # in a newline for any terminal of interest (command |
| # substitutions strip trailing newlines). Given that most |
| # (all?) terminals in common use are related to ECMA-48, this |
| # shouldn't be a problem. |
| say_color_error=$(tput bold; tput setaf 1) # bold red |
| say_color_skip=$(tput setaf 4) # blue |
| say_color_warn=$(tput setaf 3) # brown/yellow |
| say_color_pass=$(tput setaf 2) # green |
| say_color_info=$(tput setaf 6) # cyan |
| say_color_reset=$(tput sgr0) |
| say_color_="" # no formatting for normal text |
| say_color () { |
| test -z "$1" && test -n "$quiet" && return |
| eval "say_color_color=\$say_color_$1" |
| shift |
| printf "%s\\n" "$say_color_color$*$say_color_reset" |
| } |
| else |
| say_color() { |
| test -z "$1" && test -n "$quiet" && return |
| shift |
| printf "%s\n" "$*" |
| } |
| fi |
| |
| USER_TERM="$TERM" |
| TERM=dumb |
| export TERM USER_TERM |
| |
| # What is written by tests to stdout and stderr is sent to different places |
| # depending on the test mode (e.g. /dev/null in non-verbose mode, piped to tee |
| # with --tee option, etc.). We save the original stdin to FD #6 and stdout and |
| # stderr to #5 and #7, so that the test framework can use them (e.g. for |
| # printing errors within the test framework) independently of the test mode. |
| exec 5>&1 |
| exec 6<&0 |
| exec 7>&2 |
| |
| _error_exit () { |
| finalize_test_output |
| GIT_EXIT_OK=t |
| exit 1 |
| } |
| |
| error () { |
| say_color error "error: $*" |
| _error_exit |
| } |
| |
| BUG () { |
| error >&7 "bug in the test script: $*" |
| } |
| |
| BAIL_OUT () { |
| test $# -ne 1 && BUG "1 param" |
| |
| # Do not change "Bail out! " string. It's part of TAP syntax: |
| # https://testanything.org/tap-specification.html |
| local bail_out="Bail out! " |
| local message="$1" |
| |
| say_color >&5 error $bail_out "$message" |
| _error_exit |
| } |
| |
| say () { |
| say_color info "$*" |
| } |
| |
| if test -n "$HARNESS_ACTIVE" |
| then |
| if test "$verbose" = t || test -n "$verbose_only" |
| then |
| BAIL_OUT 'verbose mode forbidden under TAP harness; try --verbose-log' |
| fi |
| fi |
| |
| test "${test_description}" != "" || |
| error "Test script did not set test_description." |
| |
| if test "$help" = "t" |
| then |
| printf '%s\n' "$test_description" |
| exit 0 |
| fi |
| |
| if test "$verbose_log" = "t" |
| then |
| exec 3>>"$GIT_TEST_TEE_OUTPUT_FILE" 4>&3 |
| elif test "$verbose" = "t" |
| then |
| exec 4>&2 3>&1 |
| else |
| exec 4>/dev/null 3>/dev/null |
| fi |
| |
| # Send any "-x" output directly to stderr to avoid polluting tests |
| # which capture stderr. We can do this unconditionally since it |
| # has no effect if tracing isn't turned on. |
| # |
| # Note that this sets up the trace fd as soon as we assign the variable, so it |
| # must come after the creation of descriptor 4 above. Likewise, we must never |
| # unset this, as it has the side effect of closing descriptor 4, which we |
| # use to show verbose tests to the user. |
| # |
| # Note also that we don't need or want to export it. The tracing is local to |
| # this shell, and we would not want to influence any shells we exec. |
| BASH_XTRACEFD=4 |
| |
| test_failure=0 |
| test_count=0 |
| test_fixed=0 |
| test_broken=0 |
| test_success=0 |
| |
| test_missing_prereq= |
| |
| test_external_has_tap=0 |
| |
| die () { |
| code=$? |
| # This is responsible for running the atexit commands even when a |
| # test script run with '--immediate' fails, or when the user hits |
| # ctrl-C, i.e. when 'test_done' is not invoked at all. |
| test_atexit_handler || code=$? |
| if test -n "$GIT_EXIT_OK" |
| then |
| exit $code |
| else |
| echo >&5 "FATAL: Unexpected exit with code $code" |
| exit 1 |
| fi |
| } |
| |
| GIT_EXIT_OK= |
| trap 'die' EXIT |
| # Disable '-x' tracing, because with some shells, notably dash, it |
| # prevents running the cleanup commands when a test script run with |
| # '--verbose-log -x' is interrupted. |
| trap '{ code=$?; set +x; } 2>/dev/null; exit $code' INT TERM HUP |
| |
| # The user-facing functions are loaded from a separate file so that |
| # test_perf subshells can have them too |
| . "$TEST_DIRECTORY/test-lib-functions.sh" |
| |
| # You are not expected to call test_ok_ and test_failure_ directly, use |
| # the test_expect_* functions instead. |
| |
| test_ok_ () { |
| test_success=$(($test_success + 1)) |
| say_color "" "ok $test_count - $@" |
| finalize_test_case_output ok "$@" |
| } |
| |
| _invert_exit_code_failure_end_blurb () { |
| say_color warn "# faked up failures as TODO & now exiting with 0 due to --invert-exit-code" |
| } |
| |
| test_failure_ () { |
| failure_label=$1 |
| test_failure=$(($test_failure + 1)) |
| local pfx="" |
| if test -n "$invert_exit_code" # && test -n "$HARNESS_ACTIVE" |
| then |
| pfx="# TODO induced breakage (--invert-exit-code):" |
| fi |
| say_color error "not ok $test_count - ${pfx:+$pfx }$1" |
| shift |
| printf '%s\n' "$*" | sed -e 's/^/# /' |
| if test -n "$immediate" |
| then |
| say_color error "1..$test_count" |
| if test -n "$invert_exit_code" |
| then |
| finalize_test_output |
| _invert_exit_code_failure_end_blurb |
| GIT_EXIT_OK=t |
| exit 0 |
| fi |
| _error_exit |
| fi |
| finalize_test_case_output failure "$failure_label" "$@" |
| } |
| |
| test_known_broken_ok_ () { |
| test_fixed=$(($test_fixed+1)) |
| say_color error "ok $test_count - $1 # TODO known breakage vanished" |
| finalize_test_case_output fixed "$1" |
| } |
| |
| test_known_broken_failure_ () { |
| test_broken=$(($test_broken+1)) |
| say_color warn "not ok $test_count - $1 # TODO known breakage" |
| finalize_test_case_output broken "$1" |
| } |
| |
| test_debug () { |
| test "$debug" = "" || eval "$1" |
| } |
| |
| match_pattern_list () { |
| arg="$1" |
| shift |
| test -z "$*" && return 1 |
| # We need to use "$*" to get field-splitting, but we want to |
| # disable globbing, since we are matching against an arbitrary |
| # $arg, not what's in the filesystem. Using "set -f" accomplishes |
| # that, but we must do it in a subshell to avoid impacting the |
| # rest of the script. The exit value of the subshell becomes |
| # the function's return value. |
| ( |
| set -f |
| for pattern_ in $* |
| do |
| case "$arg" in |
| $pattern_) |
| exit 0 |
| ;; |
| esac |
| done |
| exit 1 |
| ) |
| } |
| |
| match_test_selector_list () { |
| operation="$1" |
| shift |
| title="$1" |
| shift |
| arg="$1" |
| shift |
| test -z "$1" && return 0 |
| |
| # Commas are accepted as separators. |
| OLDIFS=$IFS |
| IFS=',' |
| set -- $1 |
| IFS=$OLDIFS |
| |
| # If the first selector is negative we include by default. |
| include= |
| case "$1" in |
| !*) include=t ;; |
| esac |
| |
| for selector |
| do |
| orig_selector=$selector |
| |
| positive=t |
| case "$selector" in |
| !*) |
| positive= |
| selector=${selector##?} |
| ;; |
| esac |
| |
| test -z "$selector" && continue |
| |
| case "$selector" in |
| *-*) |
| if expr "z${selector%%-*}" : "z[0-9]*[^0-9]" >/dev/null |
| then |
| echo "error: $operation: invalid non-numeric in range" \ |
| "start: '$orig_selector'" >&2 |
| exit 1 |
| fi |
| if expr "z${selector#*-}" : "z[0-9]*[^0-9]" >/dev/null |
| then |
| echo "error: $operation: invalid non-numeric in range" \ |
| "end: '$orig_selector'" >&2 |
| exit 1 |
| fi |
| ;; |
| *) |
| if expr "z$selector" : "z[0-9]*[^0-9]" >/dev/null |
| then |
| case "$title" in *${selector}*) |
| include=$positive |
| ;; |
| esac |
| continue |
| fi |
| esac |
| |
| # Short cut for "obvious" cases |
| test -z "$include" && test -z "$positive" && continue |
| test -n "$include" && test -n "$positive" && continue |
| |
| case "$selector" in |
| -*) |
| if test $arg -le ${selector#-} |
| then |
| include=$positive |
| fi |
| ;; |
| *-) |
| if test $arg -ge ${selector%-} |
| then |
| include=$positive |
| fi |
| ;; |
| *-*) |
| if test ${selector%%-*} -le $arg \ |
| && test $arg -le ${selector#*-} |
| then |
| include=$positive |
| fi |
| ;; |
| *) |
| if test $arg -eq $selector |
| then |
| include=$positive |
| fi |
| ;; |
| esac |
| done |
| |
| test -n "$include" |
| } |
| |
| maybe_teardown_verbose () { |
| test -z "$verbose_only" && return |
| exec 4>/dev/null 3>/dev/null |
| verbose= |
| } |
| |
| last_verbose=t |
| maybe_setup_verbose () { |
| test -z "$verbose_only" && return |
| if match_pattern_list $test_count "$verbose_only" |
| then |
| exec 4>&2 3>&1 |
| # Emit a delimiting blank line when going from |
| # non-verbose to verbose. Within verbose mode the |
| # delimiter is printed by test_expect_*. The choice |
| # of the initial $last_verbose is such that before |
| # test 1, we do not print it. |
| test -z "$last_verbose" && echo >&3 "" |
| verbose=t |
| else |
| exec 4>/dev/null 3>/dev/null |
| verbose= |
| fi |
| last_verbose=$verbose |
| } |
| |
| maybe_teardown_valgrind () { |
| test -z "$GIT_VALGRIND" && return |
| GIT_VALGRIND_ENABLED= |
| } |
| |
| maybe_setup_valgrind () { |
| test -z "$GIT_VALGRIND" && return |
| if test -z "$valgrind_only" |
| then |
| GIT_VALGRIND_ENABLED=t |
| return |
| fi |
| GIT_VALGRIND_ENABLED= |
| if match_pattern_list $test_count "$valgrind_only" |
| then |
| GIT_VALGRIND_ENABLED=t |
| fi |
| } |
| |
| trace_level_=0 |
| want_trace () { |
| test "$trace" = t && { |
| test "$verbose" = t || test "$verbose_log" = t |
| } |
| } |
| |
| # This is a separate function because some tests use |
| # "return" to end a test_expect_success block early |
| # (and we want to make sure we run any cleanup like |
| # "set +x"). |
| test_eval_inner_ () { |
| eval "$*" |
| } |
| |
| test_eval_ () { |
| # If "-x" tracing is in effect, then we want to avoid polluting stderr |
| # with non-test commands. But once in "set -x" mode, we cannot prevent |
| # the shell from printing the "set +x" to turn it off (nor the saving |
| # of $? before that). But we can make sure that the output goes to |
| # /dev/null. |
| # |
| # There are a few subtleties here: |
| # |
| # - we have to redirect descriptor 4 in addition to 2, to cover |
| # BASH_XTRACEFD |
| # |
| # - the actual eval has to come before the redirection block (since |
| # it needs to see descriptor 4 to set up its stderr) |
| # |
| # - likewise, any error message we print must be outside the block to |
| # access descriptor 4 |
| # |
| # - checking $? has to come immediately after the eval, but it must |
| # be _inside_ the block to avoid polluting the "set -x" output |
| # |
| |
| # Do not add anything extra (including LF) after '$*' |
| test_eval_inner_ </dev/null >&3 2>&4 " |
| want_trace && trace_level_=$(($trace_level_+1)) && set -x |
| $*" |
| { |
| test_eval_ret_=$? |
| if want_trace |
| then |
| test 1 = $trace_level_ && set +x |
| trace_level_=$(($trace_level_-1)) |
| fi |
| } 2>/dev/null 4>&2 |
| |
| if test "$test_eval_ret_" != 0 && want_trace |
| then |
| say_color error >&4 "error: last command exited with \$?=$test_eval_ret_" |
| fi |
| return $test_eval_ret_ |
| } |
| |
| fail_117 () { |
| return 117 |
| } |
| |
| test_run_ () { |
| test_cleanup=: |
| expecting_failure=$2 |
| |
| if test "${GIT_TEST_CHAIN_LINT:-1}" != 0; then |
| # 117 is magic because it is unlikely to match the exit |
| # code of other programs |
| test_eval_inner_ "fail_117 && $1" </dev/null >&3 2>&4 |
| if test $? != 117 |
| then |
| BUG "broken &&-chain: $1" |
| fi |
| fi |
| |
| setup_malloc_check |
| test_eval_ "$1" |
| eval_ret=$? |
| teardown_malloc_check |
| |
| if test -z "$immediate" || test $eval_ret = 0 || |
| test -n "$expecting_failure" && test "$test_cleanup" != ":" |
| then |
| setup_malloc_check |
| test_eval_ "$test_cleanup" |
| teardown_malloc_check |
| fi |
| if test "$verbose" = "t" && test -n "$HARNESS_ACTIVE" |
| then |
| echo "" |
| fi |
| return "$eval_ret" |
| } |
| |
| test_start_ () { |
| test_count=$(($test_count+1)) |
| maybe_setup_verbose |
| maybe_setup_valgrind |
| start_test_case_output "$@" |
| } |
| |
| test_finish_ () { |
| echo >&3 "" |
| maybe_teardown_valgrind |
| maybe_teardown_verbose |
| if test -n "$GIT_TEST_TEE_OFFSET" |
| then |
| GIT_TEST_TEE_OFFSET=$(test-tool path-utils file-size \ |
| "$GIT_TEST_TEE_OUTPUT_FILE") |
| fi |
| } |
| |
| test_skip () { |
| to_skip= |
| skipped_reason= |
| if match_pattern_list $this_test.$test_count "$GIT_SKIP_TESTS" |
| then |
| to_skip=t |
| skipped_reason="GIT_SKIP_TESTS" |
| fi |
| if test -z "$to_skip" && test -n "$run_list" && |
| ! match_test_selector_list '--run' "$1" $test_count "$run_list" |
| then |
| to_skip=t |
| skipped_reason="--run" |
| fi |
| if test -z "$to_skip" && test -n "$test_prereq" && |
| ! test_have_prereq "$test_prereq" |
| then |
| to_skip=t |
| |
| of_prereq= |
| if test "$missing_prereq" != "$test_prereq" |
| then |
| of_prereq=" of $test_prereq" |
| fi |
| skipped_reason="missing $missing_prereq${of_prereq}" |
| |
| # Keep a list of all the missing prereq for result aggregation |
| if test -z "$missing_prereq" |
| then |
| test_missing_prereq=$missing_prereq |
| else |
| test_missing_prereq="$test_missing_prereq,$missing_prereq" |
| fi |
| fi |
| |
| case "$to_skip" in |
| t) |
| |
| say_color skip "ok $test_count # skip $1 ($skipped_reason)" |
| : true |
| finalize_test_case_output skip "$@" |
| ;; |
| *) |
| false |
| ;; |
| esac |
| } |
| |
| # stub; perf-lib overrides it |
| test_at_end_hook_ () { |
| : |
| } |
| |
| test_atexit_cleanup=: |
| test_atexit_handler () { |
| # In a succeeding test script 'test_atexit_handler' is invoked |
| # twice: first from 'test_done', then from 'die' in the trap on |
| # EXIT. |
| # This condition and resetting 'test_atexit_cleanup' below makes |
| # sure that the registered cleanup commands are run only once. |
| test : != "$test_atexit_cleanup" || return 0 |
| |
| setup_malloc_check |
| test_eval_ "$test_atexit_cleanup" |
| test_atexit_cleanup=: |
| teardown_malloc_check |
| } |
| |
| sanitize_leak_log_message_ () { |
| local new="$1" && |
| local old="$2" && |
| local file="$3" && |
| |
| printf "With SANITIZE=leak at exit we have %d leak logs, but started with %d |
| |
| This means that we have a blindspot where git is leaking but we're |
| losing the exit code somewhere, or not propagating it appropriately |
| upwards! |
| |
| See the logs at \"%s.*\"; |
| those logs are reproduced below." \ |
| "$new" "$old" "$file" |
| } |
| |
| check_test_results_san_file_ () { |
| if test -z "$TEST_RESULTS_SAN_FILE" |
| then |
| return |
| fi && |
| local old="$TEST_RESULTS_SAN_DIR_NR_LEAKS_STARTUP" && |
| local new="$(nr_san_dir_leaks_)" && |
| |
| if test $new -le $old |
| then |
| return |
| fi && |
| local out="$(sanitize_leak_log_message_ "$new" "$old" "$TEST_RESULTS_SAN_FILE")" && |
| say_color error "$out" && |
| if test "$old" != 0 |
| then |
| echo && |
| say_color error "The logs include output from past runs to avoid" && |
| say_color error "that remove 'test-results' between runs." |
| fi && |
| say_color error "$(cat "$TEST_RESULTS_SAN_FILE".*)" && |
| |
| if test -n "$passes_sanitize_leak" && test "$test_failure" = 0 |
| then |
| say "As TEST_PASSES_SANITIZE_LEAK=true and our logs show we're leaking, exit non-zero!" && |
| invert_exit_code=t |
| elif test -n "$passes_sanitize_leak" |
| then |
| say "As TEST_PASSES_SANITIZE_LEAK=true and our logs show we're leaking, and we're failing for other reasons too..." && |
| invert_exit_code= |
| elif test -n "$sanitize_leak_check" && test "$test_failure" = 0 |
| then |
| say "As TEST_PASSES_SANITIZE_LEAK=true isn't set the above leak is 'ok' with GIT_TEST_PASSING_SANITIZE_LEAK=check" && |
| invert_exit_code= |
| elif test -n "$sanitize_leak_check" |
| then |
| say "As TEST_PASSES_SANITIZE_LEAK=true isn't set the above leak is 'ok' with GIT_TEST_PASSING_SANITIZE_LEAK=check" && |
| invert_exit_code=t |
| else |
| say "With GIT_TEST_SANITIZE_LEAK_LOG=true our logs revealed a memory leak, exit non-zero!" && |
| invert_exit_code=t |
| fi |
| } |
| |
| test_done () { |
| # Run the atexit commands _before_ the trash directory is |
| # removed, so the commands can access pidfiles and socket files. |
| test_atexit_handler |
| |
| finalize_test_output |
| |
| if test -z "$HARNESS_ACTIVE" |
| then |
| mkdir -p "$TEST_RESULTS_DIR" |
| |
| cat >"$TEST_RESULTS_BASE.counts" <<-EOF |
| total $test_count |
| success $test_success |
| fixed $test_fixed |
| broken $test_broken |
| failed $test_failure |
| missing_prereq $test_missing_prereq |
| |
| EOF |
| fi |
| |
| if test "$test_fixed" != 0 |
| then |
| say_color error "# $test_fixed known breakage(s) vanished; please update test(s)" |
| fi |
| if test "$test_broken" != 0 |
| then |
| say_color warn "# still have $test_broken known breakage(s)" |
| fi |
| if test "$test_broken" != 0 || test "$test_fixed" != 0 |
| then |
| test_remaining=$(( $test_count - $test_broken - $test_fixed )) |
| msg="remaining $test_remaining test(s)" |
| else |
| test_remaining=$test_count |
| msg="$test_count test(s)" |
| fi |
| case "$test_failure" in |
| 0) |
| if test $test_remaining -gt 0 |
| then |
| say_color pass "# passed all $msg" |
| fi |
| |
| # Maybe print SKIP message |
| test -z "$skip_all" || skip_all="# SKIP $skip_all" |
| case "$test_count" in |
| 0) |
| say "1..$test_count${skip_all:+ $skip_all}" |
| ;; |
| *) |
| test -z "$skip_all" || |
| say_color warn "$skip_all" |
| say "1..$test_count" |
| ;; |
| esac |
| |
| if test -n "$stress" && test -n "$invert_exit_code" |
| then |
| # We're about to move our "$TRASH_DIRECTORY" |
| # to "$TRASH_DIRECTORY.stress-failed" if |
| # --stress is combined with |
| # --invert-exit-code. |
| say "with --stress and --invert-exit-code we're not removing '$TRASH_DIRECTORY'" |
| elif test -z "$debug" && test -n "$remove_trash" |
| then |
| test -d "$TRASH_DIRECTORY" || |
| error "Tests passed but trash directory already removed before test cleanup; aborting" |
| |
| cd "$TRASH_DIRECTORY/.." && |
| rm -fr "$TRASH_DIRECTORY" || { |
| # try again in a bit |
| sleep 5; |
| rm -fr "$TRASH_DIRECTORY" |
| } || |
| error "Tests passed but test cleanup failed; aborting" |
| fi |
| |
| check_test_results_san_file_ "$test_failure" |
| |
| if test -z "$skip_all" && test -n "$invert_exit_code" |
| then |
| say_color warn "# faking up non-zero exit with --invert-exit-code" |
| GIT_EXIT_OK=t |
| exit 1 |
| fi |
| |
| test_at_end_hook_ |
| |
| GIT_EXIT_OK=t |
| exit 0 ;; |
| |
| *) |
| say_color error "# failed $test_failure among $msg" |
| say "1..$test_count" |
| |
| check_test_results_san_file_ "$test_failure" |
| |
| if test -n "$invert_exit_code" |
| then |
| _invert_exit_code_failure_end_blurb |
| GIT_EXIT_OK=t |
| exit 0 |
| fi |
| |
| GIT_EXIT_OK=t |
| exit 1 ;; |
| |
| esac |
| } |
| |
| if test -n "$valgrind" |
| then |
| make_symlink () { |
| test -h "$2" && |
| test "$1" = "$(readlink "$2")" || { |
| # be super paranoid |
| if mkdir "$2".lock |
| then |
| rm -f "$2" && |
| ln -s "$1" "$2" && |
| rm -r "$2".lock |
| else |
| while test -d "$2".lock |
| do |
| say "Waiting for lock on $2." |
| sleep 1 |
| done |
| fi |
| } |
| } |
| |
| make_valgrind_symlink () { |
| # handle only executables, unless they are shell libraries that |
| # need to be in the exec-path. |
| test -x "$1" || |
| test "# " = "$(test_copy_bytes 2 <"$1")" || |
| return; |
| |
| base=$(basename "$1") |
| case "$base" in |
| test-*) |
| symlink_target="$GIT_BUILD_DIR/t/helper/$base" |
| ;; |
| *) |
| symlink_target="$GIT_BUILD_DIR/$base" |
| ;; |
| esac |
| # do not override scripts |
| if test -x "$symlink_target" && |
| test ! -d "$symlink_target" && |
| test "#!" != "$(test_copy_bytes 2 <"$symlink_target")" |
| then |
| symlink_target=../valgrind.sh |
| fi |
| case "$base" in |
| *.sh|*.perl) |
| symlink_target=../unprocessed-script |
| esac |
| # create the link, or replace it if it is out of date |
| make_symlink "$symlink_target" "$GIT_VALGRIND/bin/$base" || exit |
| } |
| |
| # override all git executables in TEST_DIRECTORY/.. |
| GIT_VALGRIND=$TEST_DIRECTORY/valgrind |
| mkdir -p "$GIT_VALGRIND"/bin |
| for file in $GIT_BUILD_DIR/git* $GIT_BUILD_DIR/t/helper/test-* |
| do |
| make_valgrind_symlink $file |
| done |
| # special-case the mergetools loadables |
| make_symlink "$GIT_BUILD_DIR"/mergetools "$GIT_VALGRIND/bin/mergetools" |
| OLDIFS=$IFS |
| IFS=: |
| for path in $PATH |
| do |
| ls "$path"/git-* 2> /dev/null | |
| while read file |
| do |
| make_valgrind_symlink "$file" |
| done |
| done |
| IFS=$OLDIFS |
| PATH=$GIT_VALGRIND/bin:$PATH |
| GIT_EXEC_PATH=$GIT_VALGRIND/bin |
| export GIT_VALGRIND |
| GIT_VALGRIND_MODE="$valgrind" |
| export GIT_VALGRIND_MODE |
| GIT_VALGRIND_ENABLED=t |
| test -n "$valgrind_only" && GIT_VALGRIND_ENABLED= |
| export GIT_VALGRIND_ENABLED |
| elif test -n "$GIT_TEST_INSTALLED" |
| then |
| GIT_EXEC_PATH=$($GIT_TEST_INSTALLED/git --exec-path) || |
| error "Cannot run git from $GIT_TEST_INSTALLED." |
| PATH=$GIT_TEST_INSTALLED:$GIT_BUILD_DIR/t/helper:$PATH |
| GIT_EXEC_PATH=${GIT_TEST_EXEC_PATH:-$GIT_EXEC_PATH} |
| else # normal case, use ../bin-wrappers only unless $with_dashes: |
| if test -n "$no_bin_wrappers" |
| then |
| with_dashes=t |
| else |
| git_bin_dir="$GIT_BUILD_DIR/bin-wrappers" |
| if ! test -x "$git_bin_dir/git" |
| then |
| if test -z "$with_dashes" |
| then |
| say "$git_bin_dir/git is not executable; using GIT_EXEC_PATH" |
| fi |
| with_dashes=t |
| fi |
| PATH="$git_bin_dir:$PATH" |
| fi |
| GIT_EXEC_PATH=$GIT_BUILD_DIR |
| if test -n "$with_dashes" |
| then |
| PATH="$GIT_BUILD_DIR:$GIT_BUILD_DIR/t/helper:$PATH" |
| fi |
| fi |
| GIT_TEMPLATE_DIR="$GIT_BUILD_DIR"/templates/blt |
| GIT_CONFIG_NOSYSTEM=1 |
| GIT_ATTR_NOSYSTEM=1 |
| GIT_CEILING_DIRECTORIES="$TRASH_DIRECTORY/.." |
| export PATH GIT_EXEC_PATH GIT_TEMPLATE_DIR GIT_CONFIG_NOSYSTEM GIT_ATTR_NOSYSTEM GIT_CEILING_DIRECTORIES |
| |
| if test -z "$GIT_TEST_CMP" |
| then |
| if test -n "$GIT_TEST_CMP_USE_COPIED_CONTEXT" |
| then |
| GIT_TEST_CMP="$DIFF -c" |
| else |
| GIT_TEST_CMP="$DIFF -u" |
| fi |
| fi |
| |
| GITPERLLIB="$GIT_BUILD_DIR"/perl/build/lib |
| export GITPERLLIB |
| test -d "$GIT_BUILD_DIR"/templates/blt || { |
| BAIL_OUT "You haven't built things yet, have you?" |
| } |
| |
| if ! test -x "$GIT_BUILD_DIR"/t/helper/test-tool$X |
| then |
| BAIL_OUT 'You need to build test-tool; Run "make t/helper/test-tool" in the source (toplevel) directory' |
| fi |
| |
| # Are we running this test at all? |
| remove_trash= |
| this_test=${0##*/} |
| this_test=${this_test%%-*} |
| if match_pattern_list "$this_test" "$GIT_SKIP_TESTS" |
| then |
| say_color info >&3 "skipping test $this_test altogether" |
| skip_all="skip all tests in $this_test" |
| test_done |
| fi |
| |
| BAIL_OUT_ENV_NEEDS_SANITIZE_LEAK () { |
| BAIL_OUT "$1 has no effect except when compiled with SANITIZE=leak" |
| } |
| |
| if test -n "$SANITIZE_LEAK" |
| then |
| # Normalize with test_bool_env |
| passes_sanitize_leak= |
| |
| # We need to see TEST_PASSES_SANITIZE_LEAK in "test-tool |
| # env-helper" (via test_bool_env) |
| export TEST_PASSES_SANITIZE_LEAK |
| if test_bool_env TEST_PASSES_SANITIZE_LEAK false |
| then |
| passes_sanitize_leak=t |
| fi |
| |
| if test "$GIT_TEST_PASSING_SANITIZE_LEAK" = "check" |
| then |
| sanitize_leak_check=t |
| if test -n "$invert_exit_code" |
| then |
| BAIL_OUT "cannot use --invert-exit-code under GIT_TEST_PASSING_SANITIZE_LEAK=check" |
| fi |
| |
| if test -z "$passes_sanitize_leak" |
| then |
| say "in GIT_TEST_PASSING_SANITIZE_LEAK=check mode, setting --invert-exit-code for TEST_PASSES_SANITIZE_LEAK != true" |
| invert_exit_code=t |
| fi |
| elif test -z "$passes_sanitize_leak" && |
| test_bool_env GIT_TEST_PASSING_SANITIZE_LEAK false |
| then |
| skip_all="skipping $this_test under GIT_TEST_PASSING_SANITIZE_LEAK=true" |
| test_done |
| fi |
| |
| if test_bool_env GIT_TEST_SANITIZE_LEAK_LOG false |
| then |
| if ! mkdir -p "$TEST_RESULTS_SAN_DIR" |
| then |
| BAIL_OUT "cannot create $TEST_RESULTS_SAN_DIR" |
| fi && |
| TEST_RESULTS_SAN_FILE="$TEST_RESULTS_SAN_DIR/$TEST_RESULTS_SAN_FILE_PFX" |
| |
| # In case "test-results" is left over from a previous |
| # run: Only report if new leaks show up. |
| TEST_RESULTS_SAN_DIR_NR_LEAKS_STARTUP=$(nr_san_dir_leaks_) |
| |
| # Don't litter *.leak dirs if there was nothing to report |
| test_atexit "rmdir \"$TEST_RESULTS_SAN_DIR\" 2>/dev/null || :" |
| |
| prepend_var LSAN_OPTIONS : dedup_token_length=9999 |
| prepend_var LSAN_OPTIONS : log_exe_name=1 |
| prepend_var LSAN_OPTIONS : log_path=\"$TEST_RESULTS_SAN_FILE\" |
| export LSAN_OPTIONS |
| fi |
| elif test "$GIT_TEST_PASSING_SANITIZE_LEAK" = "check" || |
| test_bool_env GIT_TEST_PASSING_SANITIZE_LEAK false |
| then |
| BAIL_OUT_ENV_NEEDS_SANITIZE_LEAK "GIT_TEST_PASSING_SANITIZE_LEAK=true" |
| elif test_bool_env GIT_TEST_SANITIZE_LEAK_LOG false |
| then |
| BAIL_OUT_ENV_NEEDS_SANITIZE_LEAK "GIT_TEST_SANITIZE_LEAK_LOG=true" |
| fi |
| |
| if test "${GIT_TEST_CHAIN_LINT:-1}" != 0 && |
| test "${GIT_TEST_EXT_CHAIN_LINT:-1}" != 0 |
| then |
| "$PERL_PATH" "$TEST_DIRECTORY/chainlint.pl" "$0" || |
| BUG "lint error (see '?!...!? annotations above)" |
| fi |
| |
| # Last-minute variable setup |
| USER_HOME="$HOME" |
| HOME="$TRASH_DIRECTORY" |
| GNUPGHOME="$HOME/gnupg-home-not-used" |
| export HOME GNUPGHOME USER_HOME |
| |
| # "rm -rf" existing trash directory, even if a previous run left it |
| # with bad permissions. |
| remove_trash_directory () { |
| dir="$1" |
| if ! rm -rf "$dir" 2>/dev/null |
| then |
| chmod -R u+rwx "$dir" |
| rm -rf "$dir" |
| fi |
| ! test -d "$dir" |
| } |
| |
| # Test repository |
| remove_trash_directory "$TRASH_DIRECTORY" || { |
| BAIL_OUT 'cannot prepare test area' |
| } |
| |
| remove_trash=t |
| if test -z "$TEST_NO_CREATE_REPO" |
| then |
| git init \ |
| ${TEST_CREATE_REPO_NO_TEMPLATE:+--template=} \ |
| "$TRASH_DIRECTORY" >&3 2>&4 || |
| error "cannot run git init" |
| else |
| mkdir -p "$TRASH_DIRECTORY" |
| fi |
| |
| # Use -P to resolve symlinks in our working directory so that the cwd |
| # in subprocesses like git equals our $PWD (for pathname comparisons). |
| cd -P "$TRASH_DIRECTORY" || BAIL_OUT "cannot cd -P to \"$TRASH_DIRECTORY\"" |
| |
| start_test_output "$0" |
| |
| # Convenience |
| # A regexp to match 5 and 35 hexdigits |
| _x05='[0-9a-f][0-9a-f][0-9a-f][0-9a-f][0-9a-f]' |
| _x35="$_x05$_x05$_x05$_x05$_x05$_x05$_x05" |
| |
| test_oid_init |
| |
| ZERO_OID=$(test_oid zero) |
| OID_REGEX=$(echo $ZERO_OID | sed -e 's/0/[0-9a-f]/g') |
| OIDPATH_REGEX=$(test_oid_to_path $ZERO_OID | sed -e 's/0/[0-9a-f]/g') |
| EMPTY_TREE=$(test_oid empty_tree) |
| EMPTY_BLOB=$(test_oid empty_blob) |
| |
| # Provide an implementation of the 'yes' utility; the upper bound |
| # limit is there to help Windows that cannot stop this loop from |
| # wasting cycles when the downstream stops reading, so do not be |
| # tempted to turn it into an infinite loop. cf. 6129c930 ("test-lib: |
| # limit the output of the yes utility", 2016-02-02) |
| yes () { |
| if test $# = 0 |
| then |
| y=y |
| else |
| y="$*" |
| fi |
| |
| i=0 |
| while test $i -lt 99 |
| do |
| echo "$y" |
| i=$(($i+1)) |
| done |
| } |
| |
| # The GIT_TEST_FAIL_PREREQS code hooks into test_set_prereq(), and |
| # thus needs to be set up really early, and set an internal variable |
| # for convenience so the hot test_set_prereq() codepath doesn't need |
| # to call "test-tool env-helper" (via test_bool_env). Only do that work |
| # if needed by seeing if GIT_TEST_FAIL_PREREQS is set at all. |
| GIT_TEST_FAIL_PREREQS_INTERNAL= |
| if test -n "$GIT_TEST_FAIL_PREREQS" |
| then |
| if test_bool_env GIT_TEST_FAIL_PREREQS false |
| then |
| GIT_TEST_FAIL_PREREQS_INTERNAL=true |
| test_set_prereq FAIL_PREREQS |
| fi |
| else |
| test_lazy_prereq FAIL_PREREQS ' |
| test_bool_env GIT_TEST_FAIL_PREREQS false |
| ' |
| fi |
| |
| # Fix some commands on Windows, and other OS-specific things |
| uname_s=$(uname -s) |
| case $uname_s in |
| *MINGW*) |
| # Windows has its own (incompatible) sort and find |
| sort () { |
| /usr/bin/sort "$@" |
| } |
| find () { |
| /usr/bin/find "$@" |
| } |
| # git sees Windows-style pwd |
| pwd () { |
| builtin pwd -W |
| } |
| # no POSIX permissions |
| # backslashes in pathspec are converted to '/' |
| # exec does not inherit the PID |
| test_set_prereq MINGW |
| test_set_prereq NATIVE_CRLF |
| test_set_prereq SED_STRIPS_CR |
| test_set_prereq GREP_STRIPS_CR |
| test_set_prereq WINDOWS |
| GIT_TEST_CMP="GIT_DIR=/dev/null git diff --no-index --ignore-cr-at-eol --" |
| ;; |
| *CYGWIN*) |
| test_set_prereq POSIXPERM |
| test_set_prereq EXECKEEPSPID |
| test_set_prereq CYGWIN |
| test_set_prereq SED_STRIPS_CR |
| test_set_prereq GREP_STRIPS_CR |
| test_set_prereq WINDOWS |
| ;; |
| *) |
| test_set_prereq POSIXPERM |
| test_set_prereq BSLASHPSPEC |
| test_set_prereq EXECKEEPSPID |
| ;; |
| esac |
| |
| # Detect arches where a few things don't work |
| uname_m=$(uname -m) |
| case $uname_m in |
| parisc* | hppa*) |
| test_set_prereq HPPA |
| ;; |
| esac |
| |
| case "$GIT_DEFAULT_REF_FORMAT" in |
| files) |
| test_set_prereq REFFILES;; |
| *) |
| echo 2>&1 "error: unknown ref format $GIT_DEFAULT_REF_FORMAT" |
| exit 1 |
| ;; |
| esac |
| |
| ( COLUMNS=1 && test $COLUMNS = 1 ) && test_set_prereq COLUMNS_CAN_BE_1 |
| test -z "$NO_CURL" && test_set_prereq LIBCURL |
| test -z "$NO_PERL" && test_set_prereq PERL |
| test -z "$NO_PTHREADS" && test_set_prereq PTHREADS |
| test -z "$NO_PYTHON" && test_set_prereq PYTHON |
| test -n "$USE_LIBPCRE2" && test_set_prereq PCRE |
| test -n "$USE_LIBPCRE2" && test_set_prereq LIBPCRE2 |
| test -z "$NO_GETTEXT" && test_set_prereq GETTEXT |
| test -n "$SANITIZE_LEAK" && test_set_prereq SANITIZE_LEAK |
| test -n "$GIT_VALGRIND_ENABLED" && test_set_prereq VALGRIND |
| |
| if test -z "$GIT_TEST_CHECK_CACHE_TREE" |
| then |
| GIT_TEST_CHECK_CACHE_TREE=true |
| export GIT_TEST_CHECK_CACHE_TREE |
| fi |
| |
| test_lazy_prereq PIPE ' |
| # test whether the filesystem supports FIFOs |
| test_have_prereq !MINGW,!CYGWIN && |
| rm -f testfifo && mkfifo testfifo |
| ' |
| |
| test_lazy_prereq SYMLINKS ' |
| # test whether the filesystem supports symbolic links |
| ln -s x y && test -h y |
| ' |
| |
| test_lazy_prereq SYMLINKS_WINDOWS ' |
| # test whether symbolic links are enabled on Windows |
| test_have_prereq MINGW && |
| cmd //c "mklink y x" &> /dev/null && test -h y |
| ' |
| |
| test_lazy_prereq FILEMODE ' |
| test "$(git config --bool core.filemode)" = true |
| ' |
| |
| test_lazy_prereq CASE_INSENSITIVE_FS ' |
| echo good >CamelCase && |
| echo bad >camelcase && |
| test "$(cat CamelCase)" != good |
| ' |
| |
| test_lazy_prereq FUNNYNAMES ' |
| test_have_prereq !MINGW && |
| touch -- \ |
| "FUNNYNAMES tab embedded" \ |
| "FUNNYNAMES \"quote embedded\"" \ |
| "FUNNYNAMES newline |
| embedded" 2>/dev/null && |
| rm -- \ |
| "FUNNYNAMES tab embedded" \ |
| "FUNNYNAMES \"quote embedded\"" \ |
| "FUNNYNAMES newline |
| embedded" 2>/dev/null |
| ' |
| |
| test_lazy_prereq UTF8_NFD_TO_NFC ' |
| # check whether FS converts nfd unicode to nfc |
| auml=$(printf "\303\244") |
| aumlcdiar=$(printf "\141\314\210") |
| >"$auml" && |
| test -f "$aumlcdiar" |
| ' |
| |
| test_lazy_prereq AUTOIDENT ' |
| sane_unset GIT_AUTHOR_NAME && |
| sane_unset GIT_AUTHOR_EMAIL && |
| git var GIT_AUTHOR_IDENT |
| ' |
| |
| test_lazy_prereq EXPENSIVE ' |
| test -n "$GIT_TEST_LONG" |
| ' |
| |
| test_lazy_prereq EXPENSIVE_ON_WINDOWS ' |
| test_have_prereq EXPENSIVE || test_have_prereq !MINGW,!CYGWIN |
| ' |
| |
| test_lazy_prereq USR_BIN_TIME ' |
| test -x /usr/bin/time |
| ' |
| |
| test_lazy_prereq NOT_ROOT ' |
| uid=$(id -u) && |
| test "$uid" != 0 |
| ' |
| |
| test_lazy_prereq JGIT ' |
| jgit --version |
| ' |
| |
| # SANITY is about "can you correctly predict what the filesystem would |
| # do by only looking at the permission bits of the files and |
| # directories?" A typical example of !SANITY is running the test |
| # suite as root, where a test may expect "chmod -r file && cat file" |
| # to fail because file is supposed to be unreadable after a successful |
| # chmod. In an environment (i.e. combination of what filesystem is |
| # being used and who is running the tests) that lacks SANITY, you may |
| # be able to delete or create a file when the containing directory |
| # doesn't have write permissions, or access a file even if the |
| # containing directory doesn't have read or execute permissions. |
| |
| test_lazy_prereq SANITY ' |
| mkdir SANETESTD.1 SANETESTD.2 && |
| |
| chmod +w SANETESTD.1 SANETESTD.2 && |
| >SANETESTD.1/x 2>SANETESTD.2/x && |
| chmod -w SANETESTD.1 && |
| chmod -r SANETESTD.1/x && |
| chmod -rx SANETESTD.2 || |
| BUG "cannot prepare SANETESTD" |
| |
| ! test -r SANETESTD.1/x && |
| ! rm SANETESTD.1/x && ! test -f SANETESTD.2/x |
| status=$? |
| |
| chmod +rwx SANETESTD.1 SANETESTD.2 && |
| rm -rf SANETESTD.1 SANETESTD.2 || |
| BUG "cannot clean SANETESTD" |
| return $status |
| ' |
| |
| test FreeBSD != $uname_s || GIT_UNZIP=${GIT_UNZIP:-/usr/local/bin/unzip} |
| GIT_UNZIP=${GIT_UNZIP:-unzip} |
| test_lazy_prereq UNZIP ' |
| "$GIT_UNZIP" -v |
| test $? -ne 127 |
| ' |
| |
| run_with_limited_cmdline () { |
| (ulimit -s 128 && "$@") |
| } |
| |
| test_lazy_prereq CMDLINE_LIMIT ' |
| test_have_prereq !HPPA,!MINGW,!CYGWIN && |
| run_with_limited_cmdline true |
| ' |
| |
| run_with_limited_stack () { |
| (ulimit -s 128 && "$@") |
| } |
| |
| test_lazy_prereq ULIMIT_STACK_SIZE ' |
| test_have_prereq !HPPA,!MINGW,!CYGWIN && |
| run_with_limited_stack true |
| ' |
| |
| run_with_limited_open_files () { |
| (ulimit -n 32 && "$@") |
| } |
| |
| test_lazy_prereq ULIMIT_FILE_DESCRIPTORS ' |
| test_have_prereq !MINGW,!CYGWIN && |
| run_with_limited_open_files true |
| ' |
| |
| build_option () { |
| git version --build-options | |
| sed -ne "s/^$1: //p" |
| } |
| |
| test_lazy_prereq SIZE_T_IS_64BIT ' |
| test 8 -eq "$(build_option sizeof-size_t)" |
| ' |
| |
| test_lazy_prereq LONG_IS_64BIT ' |
| test 8 -le "$(build_option sizeof-long)" |
| ' |
| |
| test_lazy_prereq TIME_IS_64BIT 'test-tool date is64bit' |
| test_lazy_prereq TIME_T_IS_64BIT 'test-tool date time_t-is64bit' |
| |
| test_lazy_prereq CURL ' |
| curl --version |
| ' |
| |
| # SHA1 is a test if the hash algorithm in use is SHA-1. This is both for tests |
| # which will not work with other hash algorithms and tests that work but don't |
| # test anything meaningful (e.g. special values which cause short collisions). |
| test_lazy_prereq SHA1 ' |
| case "$GIT_DEFAULT_HASH" in |
| sha1) true ;; |
| "") test $(git hash-object /dev/null) = e69de29bb2d1d6434b8b29ae775ad8c2e48c5391 ;; |
| *) false ;; |
| esac |
| ' |
| |
| test_lazy_prereq DEFAULT_REPO_FORMAT ' |
| test_have_prereq SHA1,REFFILES |
| ' |
| |
| # Ensure that no test accidentally triggers a Git command |
| # that runs the actual maintenance scheduler, affecting a user's |
| # system permanently. |
| # Tests that verify the scheduler integration must set this locally |
| # to avoid errors. |
| GIT_TEST_MAINT_SCHEDULER="none:exit 1" |
| |
| # Does this platform support `git fsmonitor--daemon` |
| # |
| test_lazy_prereq FSMONITOR_DAEMON ' |
| git version --build-options >output && |
| grep "feature: fsmonitor--daemon" output |
| ' |