| git-pull(1) |
| =========== |
| |
| NAME |
| ---- |
| git-pull - Fetch from and integrate with another repository or a local branch |
| |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git pull' [options] [<repository> [<refspec>...]] |
| |
| |
| DESCRIPTION |
| ----------- |
| |
| Incorporates changes from a remote repository into the current |
| branch. In its default mode, `git pull` is shorthand for |
| `git fetch` followed by `git merge FETCH_HEAD`. |
| |
| More precisely, 'git pull' runs 'git fetch' with the given |
| parameters and calls 'git merge' to merge the retrieved branch |
| heads into the current branch. |
| With `--rebase`, it runs 'git rebase' instead of 'git merge'. |
| |
| <repository> should be the name of a remote repository as |
| passed to linkgit:git-fetch[1]. <refspec> can name an |
| arbitrary remote ref (for example, the name of a tag) or even |
| a collection of refs with corresponding remote-tracking branches |
| (e.g., refs/heads/{asterisk}:refs/remotes/origin/{asterisk}), |
| but usually it is the name of a branch in the remote repository. |
| |
| Default values for <repository> and <branch> are read from the |
| "remote" and "merge" configuration for the current branch |
| as set by linkgit:git-branch[1] `--track`. |
| |
| Assume the following history exists and the current branch is |
| "`master`": |
| |
| ------------ |
| A---B---C master on origin |
| / |
| D---E---F---G master |
| ^ |
| origin/master in your repository |
| ------------ |
| |
| Then "`git pull`" will fetch and replay the changes from the remote |
| `master` branch since it diverged from the local `master` (i.e., `E`) |
| until its current commit (`C`) on top of `master` and record the |
| result in a new commit along with the names of the two parent commits |
| and a log message from the user describing the changes. |
| |
| ------------ |
| A---B---C origin/master |
| / \ |
| D---E---F---G---H master |
| ------------ |
| |
| See linkgit:git-merge[1] for details, including how conflicts |
| are presented and handled. |
| |
| In Git 1.7.0 or later, to cancel a conflicting merge, use |
| `git reset --merge`. *Warning*: In older versions of Git, running 'git pull' |
| with uncommitted changes is discouraged: while possible, it leaves you |
| in a state that may be hard to back out of in the case of a conflict. |
| |
| If any of the remote changes overlap with local uncommitted changes, |
| the merge will be automatically cancelled and the work tree untouched. |
| It is generally best to get any local changes in working order before |
| pulling or stash them away with linkgit:git-stash[1]. |
| |
| OPTIONS |
| ------- |
| |
| Options meant for 'git pull' itself and the underlying 'git merge' |
| must be given before the options meant for 'git fetch'. |
| |
| -q:: |
| --quiet:: |
| This is passed to both underlying git-fetch to squelch reporting of |
| during transfer, and underlying git-merge to squelch output during |
| merging. |
| |
| -v:: |
| --verbose:: |
| Pass --verbose to git-fetch and git-merge. |
| |
| --[no-]recurse-submodules[=yes|on-demand|no]:: |
| This option controls if new commits of all populated submodules should |
| be fetched too (see linkgit:git-config[1] and linkgit:gitmodules[5]). |
| That might be necessary to get the data needed for merging submodule |
| commits, a feature Git learned in 1.7.3. Notice that the result of a |
| merge will not be checked out in the submodule, "git submodule update" |
| has to be called afterwards to bring the work tree up to date with the |
| merge result. |
| |
| Options related to merging |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| :git-pull: 1 |
| |
| include::merge-options.txt[] |
| |
| -r:: |
| --rebase[=false|true|preserve]:: |
| When true, rebase the current branch on top of the upstream |
| branch after fetching. If there is a remote-tracking branch |
| corresponding to the upstream branch and the upstream branch |
| was rebased since last fetched, the rebase uses that information |
| to avoid rebasing non-local changes. |
| + |
| When preserve, also rebase the current branch on top of the upstream |
| branch, but pass `--preserve-merges` along to `git rebase` so that |
| locally created merge commits will not be flattened. |
| + |
| When false, merge the current branch into the upstream branch. |
| + |
| See `pull.rebase`, `branch.<name>.rebase` and `branch.autosetuprebase` in |
| linkgit:git-config[1] if you want to make `git pull` always use |
| `--rebase` instead of merging. |
| + |
| [NOTE] |
| This is a potentially _dangerous_ mode of operation. |
| It rewrites history, which does not bode well when you |
| published that history already. Do *not* use this option |
| unless you have read linkgit:git-rebase[1] carefully. |
| |
| --no-rebase:: |
| Override earlier --rebase. |
| |
| Options related to fetching |
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
| |
| include::fetch-options.txt[] |
| |
| include::pull-fetch-param.txt[] |
| |
| include::urls-remotes.txt[] |
| |
| include::merge-strategies.txt[] |
| |
| DEFAULT BEHAVIOUR |
| ----------------- |
| |
| Often people use `git pull` without giving any parameter. |
| Traditionally, this has been equivalent to saying `git pull |
| origin`. However, when configuration `branch.<name>.remote` is |
| present while on branch `<name>`, that value is used instead of |
| `origin`. |
| |
| In order to determine what URL to use to fetch from, the value |
| of the configuration `remote.<origin>.url` is consulted |
| and if there is not any such variable, the value on `URL: ` line |
| in `$GIT_DIR/remotes/<origin>` file is used. |
| |
| In order to determine what remote branches to fetch (and |
| optionally store in the remote-tracking branches) when the command is |
| run without any refspec parameters on the command line, values |
| of the configuration variable `remote.<origin>.fetch` are |
| consulted, and if there aren't any, `$GIT_DIR/remotes/<origin>` |
| file is consulted and its `Pull: ` lines are used. |
| In addition to the refspec formats described in the OPTIONS |
| section, you can have a globbing refspec that looks like this: |
| |
| ------------ |
| refs/heads/*:refs/remotes/origin/* |
| ------------ |
| |
| A globbing refspec must have a non-empty RHS (i.e. must store |
| what were fetched in remote-tracking branches), and its LHS and RHS |
| must end with `/*`. The above specifies that all remote |
| branches are tracked using remote-tracking branches in |
| `refs/remotes/origin/` hierarchy under the same name. |
| |
| The rule to determine which remote branch to merge after |
| fetching is a bit involved, in order not to break backward |
| compatibility. |
| |
| If explicit refspecs were given on the command |
| line of `git pull`, they are all merged. |
| |
| When no refspec was given on the command line, then `git pull` |
| uses the refspec from the configuration or |
| `$GIT_DIR/remotes/<origin>`. In such cases, the following |
| rules apply: |
| |
| . If `branch.<name>.merge` configuration for the current |
| branch `<name>` exists, that is the name of the branch at the |
| remote site that is merged. |
| |
| . If the refspec is a globbing one, nothing is merged. |
| |
| . Otherwise the remote branch of the first refspec is merged. |
| |
| |
| EXAMPLES |
| -------- |
| |
| * Update the remote-tracking branches for the repository |
| you cloned from, then merge one of them into your |
| current branch: |
| + |
| ------------------------------------------------ |
| $ git pull, git pull origin |
| ------------------------------------------------ |
| + |
| Normally the branch merged in is the HEAD of the remote repository, |
| but the choice is determined by the branch.<name>.remote and |
| branch.<name>.merge options; see linkgit:git-config[1] for details. |
| |
| * Merge into the current branch the remote branch `next`: |
| + |
| ------------------------------------------------ |
| $ git pull origin next |
| ------------------------------------------------ |
| + |
| This leaves a copy of `next` temporarily in FETCH_HEAD, but |
| does not update any remote-tracking branches. Using remote-tracking |
| branches, the same can be done by invoking fetch and merge: |
| + |
| ------------------------------------------------ |
| $ git fetch origin |
| $ git merge origin/next |
| ------------------------------------------------ |
| |
| |
| If you tried a pull which resulted in complex conflicts and |
| would want to start over, you can recover with 'git reset'. |
| |
| |
| BUGS |
| ---- |
| Using --recurse-submodules can only fetch new commits in already checked |
| out submodules right now. When e.g. upstream added a new submodule in the |
| just fetched commits of the superproject the submodule itself can not be |
| fetched, making it impossible to check out that submodule later without |
| having to do a fetch again. This is expected to be fixed in a future Git |
| version. |
| |
| SEE ALSO |
| -------- |
| linkgit:git-fetch[1], linkgit:git-merge[1], linkgit:git-config[1] |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite |