| /* |
| * Copyright 2008 Peter Harris <git@peter.is-a-geek.org> |
| */ |
| |
| #undef NOGDI |
| #include "../git-compat-util.h" |
| #include <wingdi.h> |
| #include <winreg.h> |
| |
| /* |
| ANSI codes used by git: m, K |
| |
| This file is git-specific. Therefore, this file does not attempt |
| to implement any codes that are not used by git. |
| */ |
| |
| static HANDLE console; |
| static WORD plain_attr; |
| static WORD attr; |
| static int negative; |
| static int non_ascii_used = 0; |
| static HANDLE hthread, hread, hwrite; |
| static HANDLE hconsole1, hconsole2; |
| |
| #ifdef __MINGW32__ |
| #if !defined(__MINGW64_VERSION_MAJOR) || __MINGW64_VERSION_MAJOR < 5 |
| typedef struct _CONSOLE_FONT_INFOEX { |
| ULONG cbSize; |
| DWORD nFont; |
| COORD dwFontSize; |
| UINT FontFamily; |
| UINT FontWeight; |
| WCHAR FaceName[LF_FACESIZE]; |
| } CONSOLE_FONT_INFOEX, *PCONSOLE_FONT_INFOEX; |
| #endif |
| #endif |
| |
| typedef BOOL (WINAPI *PGETCURRENTCONSOLEFONTEX)(HANDLE, BOOL, |
| PCONSOLE_FONT_INFOEX); |
| |
| static void warn_if_raster_font(void) |
| { |
| DWORD fontFamily = 0; |
| PGETCURRENTCONSOLEFONTEX pGetCurrentConsoleFontEx; |
| |
| /* don't bother if output was ascii only */ |
| if (!non_ascii_used) |
| return; |
| |
| /* GetCurrentConsoleFontEx is available since Vista */ |
| pGetCurrentConsoleFontEx = (PGETCURRENTCONSOLEFONTEX) GetProcAddress( |
| GetModuleHandle("kernel32.dll"), |
| "GetCurrentConsoleFontEx"); |
| if (pGetCurrentConsoleFontEx) { |
| CONSOLE_FONT_INFOEX cfi; |
| cfi.cbSize = sizeof(cfi); |
| if (pGetCurrentConsoleFontEx(console, 0, &cfi)) |
| fontFamily = cfi.FontFamily; |
| } else { |
| /* pre-Vista: check default console font in registry */ |
| HKEY hkey; |
| if (ERROR_SUCCESS == RegOpenKeyExA(HKEY_CURRENT_USER, "Console", |
| 0, KEY_READ, &hkey)) { |
| DWORD size = sizeof(fontFamily); |
| RegQueryValueExA(hkey, "FontFamily", NULL, NULL, |
| (LPVOID) &fontFamily, &size); |
| RegCloseKey(hkey); |
| } |
| } |
| |
| if (!(fontFamily & TMPF_TRUETYPE)) { |
| const wchar_t *msg = L"\nWarning: Your console font probably " |
| L"doesn\'t support Unicode. If you experience strange " |
| L"characters in the output, consider switching to a " |
| L"TrueType font such as Consolas!\n"; |
| DWORD dummy; |
| WriteConsoleW(console, msg, wcslen(msg), &dummy, NULL); |
| } |
| } |
| |
| static int is_console(int fd) |
| { |
| CONSOLE_SCREEN_BUFFER_INFO sbi; |
| HANDLE hcon; |
| |
| static int initialized = 0; |
| |
| /* get OS handle of the file descriptor */ |
| hcon = (HANDLE) _get_osfhandle(fd); |
| if (hcon == INVALID_HANDLE_VALUE) |
| return 0; |
| |
| /* check if its a device (i.e. console, printer, serial port) */ |
| if (GetFileType(hcon) != FILE_TYPE_CHAR) |
| return 0; |
| |
| /* check if its a handle to a console output screen buffer */ |
| if (!GetConsoleScreenBufferInfo(hcon, &sbi)) |
| return 0; |
| |
| /* initialize attributes */ |
| if (!initialized) { |
| console = hcon; |
| attr = plain_attr = sbi.wAttributes; |
| negative = 0; |
| initialized = 1; |
| } |
| |
| return 1; |
| } |
| |
| #define BUFFER_SIZE 4096 |
| #define MAX_PARAMS 16 |
| |
| static void write_console(unsigned char *str, size_t len) |
| { |
| /* only called from console_thread, so a static buffer will do */ |
| static wchar_t wbuf[2 * BUFFER_SIZE + 1]; |
| DWORD dummy; |
| |
| /* convert utf-8 to utf-16 */ |
| int wlen = xutftowcsn(wbuf, (char*) str, ARRAY_SIZE(wbuf), len); |
| |
| /* write directly to console */ |
| WriteConsoleW(console, wbuf, wlen, &dummy, NULL); |
| |
| /* remember if non-ascii characters are printed */ |
| if (wlen != len) |
| non_ascii_used = 1; |
| } |
| |
| #define FOREGROUND_ALL (FOREGROUND_RED | FOREGROUND_GREEN | FOREGROUND_BLUE) |
| #define BACKGROUND_ALL (BACKGROUND_RED | BACKGROUND_GREEN | BACKGROUND_BLUE) |
| |
| static void set_console_attr(void) |
| { |
| WORD attributes = attr; |
| if (negative) { |
| attributes &= ~FOREGROUND_ALL; |
| attributes &= ~BACKGROUND_ALL; |
| |
| /* This could probably use a bitmask |
| instead of a series of ifs */ |
| if (attr & FOREGROUND_RED) |
| attributes |= BACKGROUND_RED; |
| if (attr & FOREGROUND_GREEN) |
| attributes |= BACKGROUND_GREEN; |
| if (attr & FOREGROUND_BLUE) |
| attributes |= BACKGROUND_BLUE; |
| |
| if (attr & BACKGROUND_RED) |
| attributes |= FOREGROUND_RED; |
| if (attr & BACKGROUND_GREEN) |
| attributes |= FOREGROUND_GREEN; |
| if (attr & BACKGROUND_BLUE) |
| attributes |= FOREGROUND_BLUE; |
| } |
| SetConsoleTextAttribute(console, attributes); |
| } |
| |
| static void erase_in_line(void) |
| { |
| CONSOLE_SCREEN_BUFFER_INFO sbi; |
| DWORD dummy; /* Needed for Windows 7 (or Vista) regression */ |
| |
| if (!console) |
| return; |
| |
| GetConsoleScreenBufferInfo(console, &sbi); |
| FillConsoleOutputCharacterA(console, ' ', |
| sbi.dwSize.X - sbi.dwCursorPosition.X, sbi.dwCursorPosition, |
| &dummy); |
| } |
| |
| static void set_attr(char func, const int *params, int paramlen) |
| { |
| int i; |
| switch (func) { |
| case 'm': |
| for (i = 0; i < paramlen; i++) { |
| switch (params[i]) { |
| case 0: /* reset */ |
| attr = plain_attr; |
| negative = 0; |
| break; |
| case 1: /* bold */ |
| attr |= FOREGROUND_INTENSITY; |
| break; |
| case 2: /* faint */ |
| case 22: /* normal */ |
| attr &= ~FOREGROUND_INTENSITY; |
| break; |
| case 3: /* italic */ |
| /* Unsupported */ |
| break; |
| case 4: /* underline */ |
| case 21: /* double underline */ |
| /* Wikipedia says this flag does nothing */ |
| /* Furthermore, mingw doesn't define this flag |
| attr |= COMMON_LVB_UNDERSCORE; */ |
| break; |
| case 24: /* no underline */ |
| /* attr &= ~COMMON_LVB_UNDERSCORE; */ |
| break; |
| case 5: /* slow blink */ |
| case 6: /* fast blink */ |
| /* We don't have blink, but we do have |
| background intensity */ |
| attr |= BACKGROUND_INTENSITY; |
| break; |
| case 25: /* no blink */ |
| attr &= ~BACKGROUND_INTENSITY; |
| break; |
| case 7: /* negative */ |
| negative = 1; |
| break; |
| case 27: /* positive */ |
| negative = 0; |
| break; |
| case 8: /* conceal */ |
| case 28: /* reveal */ |
| /* Unsupported */ |
| break; |
| case 30: /* Black */ |
| attr &= ~FOREGROUND_ALL; |
| break; |
| case 31: /* Red */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= FOREGROUND_RED; |
| break; |
| case 32: /* Green */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= FOREGROUND_GREEN; |
| break; |
| case 33: /* Yellow */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= FOREGROUND_RED | FOREGROUND_GREEN; |
| break; |
| case 34: /* Blue */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= FOREGROUND_BLUE; |
| break; |
| case 35: /* Magenta */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= FOREGROUND_RED | FOREGROUND_BLUE; |
| break; |
| case 36: /* Cyan */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= FOREGROUND_GREEN | FOREGROUND_BLUE; |
| break; |
| case 37: /* White */ |
| attr |= FOREGROUND_RED | |
| FOREGROUND_GREEN | |
| FOREGROUND_BLUE; |
| break; |
| case 38: /* Unknown */ |
| break; |
| case 39: /* reset */ |
| attr &= ~FOREGROUND_ALL; |
| attr |= (plain_attr & FOREGROUND_ALL); |
| break; |
| case 40: /* Black */ |
| attr &= ~BACKGROUND_ALL; |
| break; |
| case 41: /* Red */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= BACKGROUND_RED; |
| break; |
| case 42: /* Green */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= BACKGROUND_GREEN; |
| break; |
| case 43: /* Yellow */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= BACKGROUND_RED | BACKGROUND_GREEN; |
| break; |
| case 44: /* Blue */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= BACKGROUND_BLUE; |
| break; |
| case 45: /* Magenta */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= BACKGROUND_RED | BACKGROUND_BLUE; |
| break; |
| case 46: /* Cyan */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= BACKGROUND_GREEN | BACKGROUND_BLUE; |
| break; |
| case 47: /* White */ |
| attr |= BACKGROUND_RED | |
| BACKGROUND_GREEN | |
| BACKGROUND_BLUE; |
| break; |
| case 48: /* Unknown */ |
| break; |
| case 49: /* reset */ |
| attr &= ~BACKGROUND_ALL; |
| attr |= (plain_attr & BACKGROUND_ALL); |
| break; |
| default: |
| /* Unsupported code */ |
| break; |
| } |
| } |
| set_console_attr(); |
| break; |
| case 'K': |
| erase_in_line(); |
| break; |
| default: |
| /* Unsupported code */ |
| break; |
| } |
| } |
| |
| enum { |
| TEXT = 0, ESCAPE = 033, BRACKET = '[' |
| }; |
| |
| static DWORD WINAPI console_thread(LPVOID unused) |
| { |
| unsigned char buffer[BUFFER_SIZE]; |
| DWORD bytes; |
| int start, end = 0, c, parampos = 0, state = TEXT; |
| int params[MAX_PARAMS]; |
| |
| while (1) { |
| /* read next chunk of bytes from the pipe */ |
| if (!ReadFile(hread, buffer + end, BUFFER_SIZE - end, &bytes, |
| NULL)) { |
| /* exit if pipe has been closed or disconnected */ |
| if (GetLastError() == ERROR_PIPE_NOT_CONNECTED || |
| GetLastError() == ERROR_BROKEN_PIPE) |
| break; |
| /* ignore other errors */ |
| continue; |
| } |
| |
| /* scan the bytes and handle ANSI control codes */ |
| bytes += end; |
| start = end = 0; |
| while (end < bytes) { |
| c = buffer[end++]; |
| switch (state) { |
| case TEXT: |
| if (c == ESCAPE) { |
| /* print text seen so far */ |
| if (end - 1 > start) |
| write_console(buffer + start, |
| end - 1 - start); |
| |
| /* then start parsing escape sequence */ |
| start = end - 1; |
| memset(params, 0, sizeof(params)); |
| parampos = 0; |
| state = ESCAPE; |
| } |
| break; |
| |
| case ESCAPE: |
| /* continue if "\033[", otherwise bail out */ |
| state = (c == BRACKET) ? BRACKET : TEXT; |
| break; |
| |
| case BRACKET: |
| /* parse [0-9;]* into array of parameters */ |
| if (c >= '0' && c <= '9') { |
| params[parampos] *= 10; |
| params[parampos] += c - '0'; |
| } else if (c == ';') { |
| /* |
| * next parameter, bail out if out of |
| * bounds |
| */ |
| parampos++; |
| if (parampos >= MAX_PARAMS) |
| state = TEXT; |
| } else { |
| /* |
| * end of escape sequence, change |
| * console attributes |
| */ |
| set_attr(c, params, parampos + 1); |
| start = end; |
| state = TEXT; |
| } |
| break; |
| } |
| } |
| |
| /* print remaining text unless parsing an escape sequence */ |
| if (state == TEXT && end > start) { |
| /* check for incomplete UTF-8 sequences and fix end */ |
| if (buffer[end - 1] >= 0x80) { |
| if (buffer[end -1] >= 0xc0) |
| end--; |
| else if (end - 1 > start && |
| buffer[end - 2] >= 0xe0) |
| end -= 2; |
| else if (end - 2 > start && |
| buffer[end - 3] >= 0xf0) |
| end -= 3; |
| } |
| |
| /* print remaining complete UTF-8 sequences */ |
| if (end > start) |
| write_console(buffer + start, end - start); |
| |
| /* move remaining bytes to the front */ |
| if (end < bytes) |
| memmove(buffer, buffer + end, bytes - end); |
| end = bytes - end; |
| } else { |
| /* all data has been consumed, mark buffer empty */ |
| end = 0; |
| } |
| } |
| |
| /* check if the console font supports unicode */ |
| warn_if_raster_font(); |
| |
| CloseHandle(hread); |
| return 0; |
| } |
| |
| static void winansi_exit(void) |
| { |
| /* flush all streams */ |
| _flushall(); |
| |
| /* signal console thread to exit */ |
| FlushFileBuffers(hwrite); |
| DisconnectNamedPipe(hwrite); |
| |
| /* wait for console thread to copy remaining data */ |
| WaitForSingleObject(hthread, INFINITE); |
| |
| /* cleanup handles... */ |
| CloseHandle(hwrite); |
| CloseHandle(hthread); |
| } |
| |
| static void die_lasterr(const char *fmt, ...) |
| { |
| va_list params; |
| va_start(params, fmt); |
| errno = err_win_to_posix(GetLastError()); |
| die_errno(fmt, params); |
| va_end(params); |
| } |
| |
| static HANDLE duplicate_handle(HANDLE hnd) |
| { |
| HANDLE hresult, hproc = GetCurrentProcess(); |
| if (!DuplicateHandle(hproc, hnd, hproc, &hresult, 0, TRUE, |
| DUPLICATE_SAME_ACCESS)) |
| die_lasterr("DuplicateHandle(%li) failed", |
| (long) (intptr_t) hnd); |
| return hresult; |
| } |
| |
| |
| /* |
| * Make MSVCRT's internal file descriptor control structure accessible |
| * so that we can tweak OS handles and flags directly (we need MSVCRT |
| * to treat our pipe handle as if it were a console). |
| * |
| * We assume that the ioinfo structure (exposed by MSVCRT.dll via |
| * __pioinfo) starts with the OS handle and the flags. The exact size |
| * varies between MSVCRT versions, so we try different sizes until |
| * toggling the FDEV bit of _pioinfo(1)->osflags is reflected in |
| * isatty(1). |
| */ |
| typedef struct { |
| HANDLE osfhnd; |
| char osflags; |
| } ioinfo; |
| |
| extern __declspec(dllimport) ioinfo *__pioinfo[]; |
| |
| static size_t sizeof_ioinfo = 0; |
| |
| #define IOINFO_L2E 5 |
| #define IOINFO_ARRAY_ELTS (1 << IOINFO_L2E) |
| |
| #define FPIPE 0x08 |
| #define FDEV 0x40 |
| |
| static inline ioinfo* _pioinfo(int fd) |
| { |
| return (ioinfo*)((char*)__pioinfo[fd >> IOINFO_L2E] + |
| (fd & (IOINFO_ARRAY_ELTS - 1)) * sizeof_ioinfo); |
| } |
| |
| static int init_sizeof_ioinfo(void) |
| { |
| int istty, wastty; |
| /* don't init twice */ |
| if (sizeof_ioinfo) |
| return sizeof_ioinfo >= 256; |
| |
| sizeof_ioinfo = sizeof(ioinfo); |
| wastty = isatty(1); |
| while (sizeof_ioinfo < 256) { |
| /* toggle FDEV flag, check isatty, then toggle back */ |
| _pioinfo(1)->osflags ^= FDEV; |
| istty = isatty(1); |
| _pioinfo(1)->osflags ^= FDEV; |
| /* return if we found the correct size */ |
| if (istty != wastty) |
| return 0; |
| sizeof_ioinfo += sizeof(void*); |
| } |
| error("Tweaking file descriptors doesn't work with this MSVCRT.dll"); |
| return 1; |
| } |
| |
| static HANDLE swap_osfhnd(int fd, HANDLE new_handle) |
| { |
| ioinfo *pioinfo; |
| HANDLE old_handle; |
| |
| /* init ioinfo size if we haven't done so */ |
| if (init_sizeof_ioinfo()) |
| return INVALID_HANDLE_VALUE; |
| |
| /* get ioinfo pointer and change the handles */ |
| pioinfo = _pioinfo(fd); |
| old_handle = pioinfo->osfhnd; |
| pioinfo->osfhnd = new_handle; |
| return old_handle; |
| } |
| |
| #ifdef DETECT_MSYS_TTY |
| |
| #include <winternl.h> |
| #include <ntstatus.h> |
| |
| static void detect_msys_tty(int fd) |
| { |
| ULONG result; |
| BYTE buffer[1024]; |
| POBJECT_NAME_INFORMATION nameinfo = (POBJECT_NAME_INFORMATION) buffer; |
| PWSTR name; |
| |
| /* check if fd is a pipe */ |
| HANDLE h = (HANDLE) _get_osfhandle(fd); |
| if (GetFileType(h) != FILE_TYPE_PIPE) |
| return; |
| |
| /* get pipe name */ |
| if (!NT_SUCCESS(NtQueryObject(h, ObjectNameInformation, |
| buffer, sizeof(buffer) - 2, &result))) |
| return; |
| name = nameinfo->Name.Buffer; |
| name[nameinfo->Name.Length] = 0; |
| |
| /* check if this could be a MSYS2 pty pipe ('msys-XXXX-ptyN-XX') */ |
| if (!wcsstr(name, L"msys-") || !wcsstr(name, L"-pty")) |
| return; |
| |
| /* init ioinfo size if we haven't done so */ |
| if (init_sizeof_ioinfo()) |
| return; |
| |
| /* set FDEV flag, reset FPIPE flag */ |
| _pioinfo(fd)->osflags &= ~FPIPE; |
| _pioinfo(fd)->osflags |= FDEV; |
| } |
| |
| #endif |
| |
| void winansi_init(void) |
| { |
| int con1, con2; |
| char name[32]; |
| |
| /* check if either stdout or stderr is a console output screen buffer */ |
| con1 = is_console(1); |
| con2 = is_console(2); |
| if (!con1 && !con2) { |
| #ifdef DETECT_MSYS_TTY |
| /* check if stdin / stdout / stderr are MSYS2 pty pipes */ |
| detect_msys_tty(0); |
| detect_msys_tty(1); |
| detect_msys_tty(2); |
| #endif |
| return; |
| } |
| |
| /* create a named pipe to communicate with the console thread */ |
| xsnprintf(name, sizeof(name), "\\\\.\\pipe\\winansi%lu", GetCurrentProcessId()); |
| hwrite = CreateNamedPipe(name, PIPE_ACCESS_OUTBOUND, |
| PIPE_TYPE_BYTE | PIPE_WAIT, 1, BUFFER_SIZE, 0, 0, NULL); |
| if (hwrite == INVALID_HANDLE_VALUE) |
| die_lasterr("CreateNamedPipe failed"); |
| |
| hread = CreateFile(name, GENERIC_READ, 0, NULL, OPEN_EXISTING, 0, NULL); |
| if (hread == INVALID_HANDLE_VALUE) |
| die_lasterr("CreateFile for named pipe failed"); |
| |
| /* start console spool thread on the pipe's read end */ |
| hthread = CreateThread(NULL, 0, console_thread, NULL, 0, NULL); |
| if (hthread == INVALID_HANDLE_VALUE) |
| die_lasterr("CreateThread(console_thread) failed"); |
| |
| /* schedule cleanup routine */ |
| if (atexit(winansi_exit)) |
| die_errno("atexit(winansi_exit) failed"); |
| |
| /* redirect stdout / stderr to the pipe */ |
| if (con1) |
| hconsole1 = swap_osfhnd(1, duplicate_handle(hwrite)); |
| if (con2) |
| hconsole2 = swap_osfhnd(2, duplicate_handle(hwrite)); |
| } |
| |
| /* |
| * Returns the real console handle if stdout / stderr is a pipe redirecting |
| * to the console. Allows spawn / exec to pass the console to the next process. |
| */ |
| HANDLE winansi_get_osfhandle(int fd) |
| { |
| HANDLE hnd = (HANDLE) _get_osfhandle(fd); |
| if (isatty(fd) && GetFileType(hnd) == FILE_TYPE_PIPE) { |
| if (fd == 1 && hconsole1) |
| return hconsole1; |
| else if (fd == 2 && hconsole2) |
| return hconsole2; |
| } |
| return hnd; |
| } |