| # git-mergetool--lib is a shell library for common merge tool functions |
| |
| : ${MERGE_TOOLS_DIR=$(git --exec-path)/mergetools} |
| |
| IFS=' |
| ' |
| |
| mode_ok () { |
| if diff_mode |
| then |
| can_diff |
| elif merge_mode |
| then |
| can_merge |
| else |
| false |
| fi |
| } |
| |
| is_available () { |
| merge_tool_path=$(translate_merge_tool_path "$1") && |
| type "$merge_tool_path" >/dev/null 2>&1 |
| } |
| |
| list_config_tools () { |
| section=$1 |
| line_prefix=${2:-} |
| |
| git config --get-regexp $section'\..*\.cmd' | |
| while read -r key value |
| do |
| toolname=${key#$section.} |
| toolname=${toolname%.cmd} |
| |
| printf "%s%s\n" "$line_prefix" "$toolname" |
| done |
| } |
| |
| show_tool_names () { |
| condition=${1:-true} per_line_prefix=${2:-} preamble=${3:-} |
| not_found_msg=${4:-} |
| extra_content=${5:-} |
| |
| shown_any= |
| ( cd "$MERGE_TOOLS_DIR" && ls ) | { |
| while read scriptname |
| do |
| setup_tool "$scriptname" 2>/dev/null |
| # We need an actual line feed here |
| variants="$variants |
| $(list_tool_variants)" |
| done |
| variants="$(echo "$variants" | sort -u)" |
| |
| for toolname in $variants |
| do |
| if setup_tool "$toolname" 2>/dev/null && |
| (eval "$condition" "$toolname") |
| then |
| if test -n "$preamble" |
| then |
| printf "%s\n" "$preamble" |
| preamble= |
| fi |
| shown_any=yes |
| printf "%s%s\n" "$per_line_prefix" "$toolname" |
| fi |
| done |
| |
| if test -n "$extra_content" |
| then |
| if test -n "$preamble" |
| then |
| # Note: no '\n' here since we don't want a |
| # blank line if there is no initial content. |
| printf "%s" "$preamble" |
| preamble= |
| fi |
| shown_any=yes |
| printf "\n%s\n" "$extra_content" |
| fi |
| |
| if test -n "$preamble" && test -n "$not_found_msg" |
| then |
| printf "%s\n" "$not_found_msg" |
| fi |
| |
| test -n "$shown_any" |
| } |
| } |
| |
| diff_mode () { |
| test "$TOOL_MODE" = diff |
| } |
| |
| merge_mode () { |
| test "$TOOL_MODE" = merge |
| } |
| |
| gui_mode () { |
| test "$GIT_MERGETOOL_GUI" = true |
| } |
| |
| translate_merge_tool_path () { |
| echo "$1" |
| } |
| |
| check_unchanged () { |
| if test "$MERGED" -nt "$BACKUP" |
| then |
| return 0 |
| else |
| while true |
| do |
| echo "$MERGED seems unchanged." |
| printf "Was the merge successful [y/n]? " |
| read answer || return 1 |
| case "$answer" in |
| y*|Y*) return 0 ;; |
| n*|N*) return 1 ;; |
| esac |
| done |
| fi |
| } |
| |
| valid_tool () { |
| setup_tool "$1" && return 0 |
| cmd=$(get_merge_tool_cmd "$1") |
| test -n "$cmd" |
| } |
| |
| setup_user_tool () { |
| merge_tool_cmd=$(get_merge_tool_cmd "$tool") |
| test -n "$merge_tool_cmd" || return 1 |
| |
| diff_cmd () { |
| ( eval $merge_tool_cmd ) |
| } |
| |
| merge_cmd () { |
| ( eval $merge_tool_cmd ) |
| } |
| |
| list_tool_variants () { |
| echo "$tool" |
| } |
| } |
| |
| setup_tool () { |
| tool="$1" |
| |
| # Fallback definitions, to be overridden by tools. |
| can_merge () { |
| return 0 |
| } |
| |
| can_diff () { |
| return 0 |
| } |
| |
| diff_cmd () { |
| return 1 |
| } |
| |
| merge_cmd () { |
| return 1 |
| } |
| |
| hide_resolved_enabled () { |
| return 0 |
| } |
| |
| translate_merge_tool_path () { |
| echo "$1" |
| } |
| |
| list_tool_variants () { |
| echo "$tool" |
| } |
| |
| # Most tools' exit codes cannot be trusted, so By default we ignore |
| # their exit code and check the merged file's modification time in |
| # check_unchanged() to determine whether or not the merge was |
| # successful. The return value from run_merge_cmd, by default, is |
| # determined by check_unchanged(). |
| # |
| # When a tool's exit code can be trusted then the return value from |
| # run_merge_cmd is simply the tool's exit code, and check_unchanged() |
| # is not called. |
| # |
| # The return value of exit_code_trustable() tells us whether or not we |
| # can trust the tool's exit code. |
| # |
| # User-defined and built-in tools default to false. |
| # Built-in tools advertise that their exit code is trustable by |
| # redefining exit_code_trustable() to true. |
| |
| exit_code_trustable () { |
| false |
| } |
| |
| if test -f "$MERGE_TOOLS_DIR/$tool" |
| then |
| . "$MERGE_TOOLS_DIR/$tool" |
| elif test -f "$MERGE_TOOLS_DIR/${tool%[0-9]}" |
| then |
| . "$MERGE_TOOLS_DIR/${tool%[0-9]}" |
| else |
| setup_user_tool |
| return $? |
| fi |
| |
| # Now let the user override the default command for the tool. If |
| # they have not done so then this will return 1 which we ignore. |
| setup_user_tool |
| |
| if ! list_tool_variants | grep -q "^$tool$" |
| then |
| return 1 |
| fi |
| |
| if merge_mode && ! can_merge |
| then |
| echo "error: '$tool' can not be used to resolve merges" >&2 |
| return 1 |
| elif diff_mode && ! can_diff |
| then |
| echo "error: '$tool' can only be used to resolve merges" >&2 |
| return 1 |
| fi |
| return 0 |
| } |
| |
| get_merge_tool_cmd () { |
| merge_tool="$1" |
| if diff_mode |
| then |
| git config "difftool.$merge_tool.cmd" || |
| git config "mergetool.$merge_tool.cmd" |
| else |
| git config "mergetool.$merge_tool.cmd" |
| fi |
| } |
| |
| trust_exit_code () { |
| if git config --bool "mergetool.$1.trustExitCode" |
| then |
| :; # OK |
| elif exit_code_trustable |
| then |
| echo true |
| else |
| echo false |
| fi |
| } |
| |
| initialize_merge_tool () { |
| # Bring tool-specific functions into scope |
| setup_tool "$1" || return 1 |
| } |
| |
| # Entry point for running tools |
| run_merge_tool () { |
| # If GIT_PREFIX is empty then we cannot use it in tools |
| # that expect to be able to chdir() to its value. |
| GIT_PREFIX=${GIT_PREFIX:-.} |
| export GIT_PREFIX |
| |
| merge_tool_path=$(get_merge_tool_path "$1") || exit |
| base_present="$2" |
| |
| if merge_mode |
| then |
| run_merge_cmd "$1" |
| else |
| run_diff_cmd "$1" |
| fi |
| } |
| |
| # Run a either a configured or built-in diff tool |
| run_diff_cmd () { |
| diff_cmd "$1" |
| } |
| |
| # Run a either a configured or built-in merge tool |
| run_merge_cmd () { |
| mergetool_trust_exit_code=$(trust_exit_code "$1") |
| if test "$mergetool_trust_exit_code" = "true" |
| then |
| merge_cmd "$1" |
| else |
| touch "$BACKUP" |
| merge_cmd "$1" |
| check_unchanged |
| fi |
| } |
| |
| list_merge_tool_candidates () { |
| if merge_mode |
| then |
| tools="tortoisemerge" |
| else |
| tools="kompare" |
| fi |
| if test -n "$DISPLAY" |
| then |
| if test -n "$GNOME_DESKTOP_SESSION_ID" |
| then |
| tools="meld opendiff kdiff3 tkdiff xxdiff $tools" |
| else |
| tools="opendiff kdiff3 tkdiff xxdiff meld $tools" |
| fi |
| tools="$tools gvimdiff diffuse diffmerge ecmerge" |
| tools="$tools p4merge araxis bc codecompare" |
| tools="$tools smerge" |
| fi |
| case "${VISUAL:-$EDITOR}" in |
| *nvim*) |
| tools="$tools nvimdiff vimdiff emerge" |
| ;; |
| *vim*) |
| tools="$tools vimdiff nvimdiff emerge" |
| ;; |
| *) |
| tools="$tools emerge vimdiff nvimdiff" |
| ;; |
| esac |
| } |
| |
| show_tool_help () { |
| tool_opt="'git ${TOOL_MODE}tool --tool=<tool>'" |
| |
| tab=' ' |
| LF=' |
| ' |
| any_shown=no |
| |
| cmd_name=${TOOL_MODE}tool |
| config_tools=$({ |
| diff_mode && list_config_tools difftool "$tab$tab" |
| list_config_tools mergetool "$tab$tab" |
| } | sort) |
| extra_content= |
| if test -n "$config_tools" |
| then |
| extra_content="${tab}user-defined:${LF}$config_tools" |
| fi |
| |
| show_tool_names 'mode_ok && is_available' "$tab$tab" \ |
| "$tool_opt may be set to one of the following:" \ |
| "No suitable tool for 'git $cmd_name --tool=<tool>' found." \ |
| "$extra_content" && |
| any_shown=yes |
| |
| show_tool_names 'mode_ok && ! is_available' "$tab$tab" \ |
| "${LF}The following tools are valid, but not currently available:" && |
| any_shown=yes |
| |
| if test "$any_shown" = yes |
| then |
| echo |
| echo "Some of the tools listed above only work in a windowed" |
| echo "environment. If run in a terminal-only session, they will fail." |
| fi |
| exit 0 |
| } |
| |
| guess_merge_tool () { |
| list_merge_tool_candidates |
| cat >&2 <<-EOF |
| |
| This message is displayed because '$TOOL_MODE.tool' is not configured. |
| See 'git ${TOOL_MODE}tool --tool-help' or 'git help config' for more details. |
| 'git ${TOOL_MODE}tool' will now attempt to use one of the following tools: |
| $tools |
| EOF |
| |
| # Loop over each candidate and stop when a valid merge tool is found. |
| IFS=' ' |
| for tool in $tools |
| do |
| is_available "$tool" && echo "$tool" && return 0 |
| done |
| |
| echo >&2 "No known ${TOOL_MODE} tool is available." |
| return 1 |
| } |
| |
| get_configured_merge_tool () { |
| keys= |
| if diff_mode |
| then |
| if gui_mode |
| then |
| keys="diff.guitool merge.guitool diff.tool merge.tool" |
| else |
| keys="diff.tool merge.tool" |
| fi |
| else |
| if gui_mode |
| then |
| keys="merge.guitool merge.tool" |
| else |
| keys="merge.tool" |
| fi |
| fi |
| |
| merge_tool=$( |
| IFS=' ' |
| for key in $keys |
| do |
| selected=$(git config $key) |
| if test -n "$selected" |
| then |
| echo "$selected" |
| return |
| fi |
| done) |
| |
| if test -n "$merge_tool" && ! valid_tool "$merge_tool" |
| then |
| echo >&2 "git config option $TOOL_MODE.${gui_prefix}tool set to unknown tool: $merge_tool" |
| echo >&2 "Resetting to default..." |
| return 1 |
| fi |
| echo "$merge_tool" |
| } |
| |
| get_merge_tool_path () { |
| # A merge tool has been set, so verify that it's valid. |
| merge_tool="$1" |
| if ! valid_tool "$merge_tool" |
| then |
| echo >&2 "Unknown merge tool $merge_tool" |
| exit 1 |
| fi |
| if diff_mode |
| then |
| merge_tool_path=$(git config difftool."$merge_tool".path || |
| git config mergetool."$merge_tool".path) |
| else |
| merge_tool_path=$(git config mergetool."$merge_tool".path) |
| fi |
| if test -z "$merge_tool_path" |
| then |
| merge_tool_path=$(translate_merge_tool_path "$merge_tool") |
| fi |
| if test -z "$(get_merge_tool_cmd "$merge_tool")" && |
| ! type "$merge_tool_path" >/dev/null 2>&1 |
| then |
| echo >&2 "The $TOOL_MODE tool $merge_tool is not available as"\ |
| "'$merge_tool_path'" |
| exit 1 |
| fi |
| echo "$merge_tool_path" |
| } |
| |
| get_merge_tool () { |
| is_guessed=false |
| # Check if a merge tool has been configured |
| merge_tool=$(get_configured_merge_tool) |
| # Try to guess an appropriate merge tool if no tool has been set. |
| if test -z "$merge_tool" |
| then |
| merge_tool=$(guess_merge_tool) || exit |
| is_guessed=true |
| fi |
| echo "$merge_tool" |
| test "$is_guessed" = false |
| } |
| |
| mergetool_find_win32_cmd () { |
| executable=$1 |
| sub_directory=$2 |
| |
| # Use $executable if it exists in $PATH |
| if type -p "$executable" >/dev/null 2>&1 |
| then |
| printf '%s' "$executable" |
| return |
| fi |
| |
| # Look for executable in the typical locations |
| for directory in $(env | grep -Ei '^PROGRAM(FILES(\(X86\))?|W6432)=' | |
| cut -d '=' -f 2- | sort -u) |
| do |
| if test -n "$directory" && test -x "$directory/$sub_directory/$executable" |
| then |
| printf '%s' "$directory/$sub_directory/$executable" |
| return |
| fi |
| done |
| |
| printf '%s' "$executable" |
| } |