| Commit Limiting |
| ~~~~~~~~~~~~~~~ |
| |
| Besides specifying a range of commits that should be listed using the |
| special notations explained in the description, additional commit |
| limiting may be applied. |
| |
| Using more options generally further limits the output (e.g. |
| `--since=<date1>` limits to commits newer than `<date1>`, and using it |
| with `--grep=<pattern>` further limits to commits whose log message |
| has a line that matches `<pattern>`), unless otherwise noted. |
| |
| Note that these are applied before commit |
| ordering and formatting options, such as `--reverse`. |
| |
| -- |
| |
| -<number>:: |
| -n <number>:: |
| --max-count=<number>:: |
| |
| Limit the number of commits to output. |
| |
| --skip=<number>:: |
| |
| Skip 'number' commits before starting to show the commit output. |
| |
| --since=<date>:: |
| --after=<date>:: |
| |
| Show commits more recent than a specific date. |
| |
| --until=<date>:: |
| --before=<date>:: |
| |
| Show commits older than a specific date. |
| |
| ifdef::git-rev-list[] |
| --max-age=<timestamp>:: |
| --min-age=<timestamp>:: |
| |
| Limit the commits output to specified time range. |
| endif::git-rev-list[] |
| |
| --author=<pattern>:: |
| --committer=<pattern>:: |
| |
| Limit the commits output to ones with author/committer |
| header lines that match the specified pattern (regular |
| expression). With more than one `--author=<pattern>`, |
| commits whose author matches any of the given patterns are |
| chosen (similarly for multiple `--committer=<pattern>`). |
| |
| --grep-reflog=<pattern>:: |
| |
| Limit the commits output to ones with reflog entries that |
| match the specified pattern (regular expression). With |
| more than one `--grep-reflog`, commits whose reflog message |
| matches any of the given patterns are chosen. It is an |
| error to use this option unless `--walk-reflogs` is in use. |
| |
| --grep=<pattern>:: |
| |
| Limit the commits output to ones with log message that |
| matches the specified pattern (regular expression). With |
| more than one `--grep=<pattern>`, commits whose message |
| matches any of the given patterns are chosen (but see |
| `--all-match`). |
| + |
| When `--show-notes` is in effect, the message from the notes as |
| if it is part of the log message. |
| |
| --all-match:: |
| Limit the commits output to ones that match all given --grep, |
| instead of ones that match at least one. |
| |
| -i:: |
| --regexp-ignore-case:: |
| |
| Match the regexp limiting patterns without regard to letters case. |
| |
| --basic-regexp:: |
| |
| Consider the limiting patterns to be basic regular expressions; |
| this is the default. |
| |
| -E:: |
| --extended-regexp:: |
| |
| Consider the limiting patterns to be extended regular expressions |
| instead of the default basic regular expressions. |
| |
| -F:: |
| --fixed-strings:: |
| |
| Consider the limiting patterns to be fixed strings (don't interpret |
| pattern as a regular expression). |
| |
| --perl-regexp:: |
| |
| Consider the limiting patterns to be Perl-compatible regexp. |
| Requires libpcre to be compiled in. |
| |
| --remove-empty:: |
| |
| Stop when a given path disappears from the tree. |
| |
| --merges:: |
| |
| Print only merge commits. This is exactly the same as `--min-parents=2`. |
| |
| --no-merges:: |
| |
| Do not print commits with more than one parent. This is |
| exactly the same as `--max-parents=1`. |
| |
| --min-parents=<number>:: |
| --max-parents=<number>:: |
| --no-min-parents:: |
| --no-max-parents:: |
| |
| Show only commits which have at least (or at most) that many |
| commits. In particular, `--max-parents=1` is the same as `--no-merges`, |
| `--min-parents=2` is the same as `--merges`. `--max-parents=0` |
| gives all root commits and `--min-parents=3` all octopus merges. |
| + |
| `--no-min-parents` and `--no-max-parents` reset these limits (to no limit) |
| again. Equivalent forms are `--min-parents=0` (any commit has 0 or more |
| parents) and `--max-parents=-1` (negative numbers denote no upper limit). |
| |
| --first-parent:: |
| Follow only the first parent commit upon seeing a merge |
| commit. This option can give a better overview when |
| viewing the evolution of a particular topic branch, |
| because merges into a topic branch tend to be only about |
| adjusting to updated upstream from time to time, and |
| this option allows you to ignore the individual commits |
| brought in to your history by such a merge. |
| |
| --not:: |
| |
| Reverses the meaning of the '{caret}' prefix (or lack thereof) |
| for all following revision specifiers, up to the next '--not'. |
| |
| --all:: |
| |
| Pretend as if all the refs in `refs/` are listed on the |
| command line as '<commit>'. |
| |
| --branches[=<pattern>]:: |
| |
| Pretend as if all the refs in `refs/heads` are listed |
| on the command line as '<commit>'. If '<pattern>' is given, limit |
| branches to ones matching given shell glob. If pattern lacks '?', |
| '{asterisk}', or '[', '/{asterisk}' at the end is implied. |
| |
| --tags[=<pattern>]:: |
| |
| Pretend as if all the refs in `refs/tags` are listed |
| on the command line as '<commit>'. If '<pattern>' is given, limit |
| tags to ones matching given shell glob. If pattern lacks '?', '{asterisk}', |
| or '[', '/{asterisk}' at the end is implied. |
| |
| --remotes[=<pattern>]:: |
| |
| Pretend as if all the refs in `refs/remotes` are listed |
| on the command line as '<commit>'. If '<pattern>' is given, limit |
| remote-tracking branches to ones matching given shell glob. |
| If pattern lacks '?', '{asterisk}', or '[', '/{asterisk}' at the end is implied. |
| |
| --glob=<glob-pattern>:: |
| Pretend as if all the refs matching shell glob '<glob-pattern>' |
| are listed on the command line as '<commit>'. Leading 'refs/', |
| is automatically prepended if missing. If pattern lacks '?', '{asterisk}', |
| or '[', '/{asterisk}' at the end is implied. |
| |
| --ignore-missing:: |
| |
| Upon seeing an invalid object name in the input, pretend as if |
| the bad input was not given. |
| |
| ifndef::git-rev-list[] |
| --bisect:: |
| |
| Pretend as if the bad bisection ref `refs/bisect/bad` |
| was listed and as if it was followed by `--not` and the good |
| bisection refs `refs/bisect/good-*` on the command |
| line. |
| endif::git-rev-list[] |
| |
| --stdin:: |
| |
| In addition to the '<commit>' listed on the command |
| line, read them from the standard input. If a '--' separator is |
| seen, stop reading commits and start reading paths to limit the |
| result. |
| |
| ifdef::git-rev-list[] |
| --quiet:: |
| |
| Don't print anything to standard output. This form |
| is primarily meant to allow the caller to |
| test the exit status to see if a range of objects is fully |
| connected (or not). It is faster than redirecting stdout |
| to /dev/null as the output does not have to be formatted. |
| endif::git-rev-list[] |
| |
| --cherry-mark:: |
| |
| Like `--cherry-pick` (see below) but mark equivalent commits |
| with `=` rather than omitting them, and inequivalent ones with `+`. |
| |
| --cherry-pick:: |
| |
| Omit any commit that introduces the same change as |
| another commit on the "other side" when the set of |
| commits are limited with symmetric difference. |
| + |
| For example, if you have two branches, `A` and `B`, a usual way |
| to list all commits on only one side of them is with |
| `--left-right` (see the example below in the description of |
| the `--left-right` option). It however shows the commits that were cherry-picked |
| from the other branch (for example, "3rd on b" may be cherry-picked |
| from branch A). With this option, such pairs of commits are |
| excluded from the output. |
| |
| --left-only:: |
| --right-only:: |
| |
| List only commits on the respective side of a symmetric range, |
| i.e. only those which would be marked `<` resp. `>` by |
| `--left-right`. |
| + |
| For example, `--cherry-pick --right-only A...B` omits those |
| commits from `B` which are in `A` or are patch-equivalent to a commit in |
| `A`. In other words, this lists the `+` commits from `git cherry A B`. |
| More precisely, `--cherry-pick --right-only --no-merges` gives the exact |
| list. |
| |
| --cherry:: |
| |
| A synonym for `--right-only --cherry-mark --no-merges`; useful to |
| limit the output to the commits on our side and mark those that |
| have been applied to the other side of a forked history with |
| `git log --cherry upstream...mybranch`, similar to |
| `git cherry upstream mybranch`. |
| |
| -g:: |
| --walk-reflogs:: |
| |
| Instead of walking the commit ancestry chain, walk |
| reflog entries from the most recent one to older ones. |
| When this option is used you cannot specify commits to |
| exclude (that is, '{caret}commit', 'commit1..commit2', |
| nor 'commit1\...commit2' notations cannot be used). |
| + |
| With '\--pretty' format other than oneline (for obvious reasons), |
| this causes the output to have two extra lines of information |
| taken from the reflog. By default, 'commit@\{Nth}' notation is |
| used in the output. When the starting commit is specified as |
| 'commit@\{now}', output also uses 'commit@\{timestamp}' notation |
| instead. Under '\--pretty=oneline', the commit message is |
| prefixed with this information on the same line. |
| This option cannot be combined with '\--reverse'. |
| See also linkgit:git-reflog[1]. |
| |
| --merge:: |
| |
| After a failed merge, show refs that touch files having a |
| conflict and don't exist on all heads to merge. |
| |
| --boundary:: |
| |
| Output uninteresting commits at the boundary, which are usually |
| not shown. |
| |
| -- |
| |
| History Simplification |
| ~~~~~~~~~~~~~~~~~~~~~~ |
| |
| Sometimes you are only interested in parts of the history, for example the |
| commits modifying a particular <path>. But there are two parts of |
| 'History Simplification', one part is selecting the commits and the other |
| is how to do it, as there are various strategies to simplify the history. |
| |
| The following options select the commits to be shown: |
| |
| <paths>:: |
| |
| Commits modifying the given <paths> are selected. |
| |
| --simplify-by-decoration:: |
| |
| Commits that are referred by some branch or tag are selected. |
| |
| Note that extra commits can be shown to give a meaningful history. |
| |
| The following options affect the way the simplification is performed: |
| |
| Default mode:: |
| |
| Simplifies the history to the simplest history explaining the |
| final state of the tree. Simplest because it prunes some side |
| branches if the end result is the same (i.e. merging branches |
| with the same content) |
| |
| --full-history:: |
| |
| Same as the default mode, but does not prune some history. |
| |
| --dense:: |
| |
| Only the selected commits are shown, plus some to have a |
| meaningful history. |
| |
| --sparse:: |
| |
| All commits in the simplified history are shown. |
| |
| --simplify-merges:: |
| |
| Additional option to '--full-history' to remove some needless |
| merges from the resulting history, as there are no selected |
| commits contributing to this merge. |
| |
| --ancestry-path:: |
| |
| When given a range of commits to display (e.g. 'commit1..commit2' |
| or 'commit2 {caret}commit1'), only display commits that exist |
| directly on the ancestry chain between the 'commit1' and |
| 'commit2', i.e. commits that are both descendants of 'commit1', |
| and ancestors of 'commit2'. |
| |
| A more detailed explanation follows. |
| |
| Suppose you specified `foo` as the <paths>. We shall call commits |
| that modify `foo` !TREESAME, and the rest TREESAME. (In a diff |
| filtered for `foo`, they look different and equal, respectively.) |
| |
| In the following, we will always refer to the same example history to |
| illustrate the differences between simplification settings. We assume |
| that you are filtering for a file `foo` in this commit graph: |
| ----------------------------------------------------------------------- |
| .-A---M---N---O---P |
| / / / / / |
| I B C D E |
| \ / / / / |
| `-------------' |
| ----------------------------------------------------------------------- |
| The horizontal line of history A---P is taken to be the first parent of |
| each merge. The commits are: |
| |
| * `I` is the initial commit, in which `foo` exists with contents |
| "asdf", and a file `quux` exists with contents "quux". Initial |
| commits are compared to an empty tree, so `I` is !TREESAME. |
| |
| * In `A`, `foo` contains just "foo". |
| |
| * `B` contains the same change as `A`. Its merge `M` is trivial and |
| hence TREESAME to all parents. |
| |
| * `C` does not change `foo`, but its merge `N` changes it to "foobar", |
| so it is not TREESAME to any parent. |
| |
| * `D` sets `foo` to "baz". Its merge `O` combines the strings from |
| `N` and `D` to "foobarbaz"; i.e., it is not TREESAME to any parent. |
| |
| * `E` changes `quux` to "xyzzy", and its merge `P` combines the |
| strings to "quux xyzzy". Despite appearing interesting, `P` is |
| TREESAME to all parents. |
| |
| 'rev-list' walks backwards through history, including or excluding |
| commits based on whether '\--full-history' and/or parent rewriting |
| (via '\--parents' or '\--children') are used. The following settings |
| are available. |
| |
| Default mode:: |
| |
| Commits are included if they are not TREESAME to any parent |
| (though this can be changed, see '\--sparse' below). If the |
| commit was a merge, and it was TREESAME to one parent, follow |
| only that parent. (Even if there are several TREESAME |
| parents, follow only one of them.) Otherwise, follow all |
| parents. |
| + |
| This results in: |
| + |
| ----------------------------------------------------------------------- |
| .-A---N---O |
| / / / |
| I---------D |
| ----------------------------------------------------------------------- |
| + |
| Note how the rule to only follow the TREESAME parent, if one is |
| available, removed `B` from consideration entirely. `C` was |
| considered via `N`, but is TREESAME. Root commits are compared to an |
| empty tree, so `I` is !TREESAME. |
| + |
| Parent/child relations are only visible with --parents, but that does |
| not affect the commits selected in default mode, so we have shown the |
| parent lines. |
| |
| --full-history without parent rewriting:: |
| |
| This mode differs from the default in one point: always follow |
| all parents of a merge, even if it is TREESAME to one of them. |
| Even if more than one side of the merge has commits that are |
| included, this does not imply that the merge itself is! In |
| the example, we get |
| + |
| ----------------------------------------------------------------------- |
| I A B N D O |
| ----------------------------------------------------------------------- |
| + |
| `P` and `M` were excluded because they are TREESAME to a parent. `E`, |
| `C` and `B` were all walked, but only `B` was !TREESAME, so the others |
| do not appear. |
| + |
| Note that without parent rewriting, it is not really possible to talk |
| about the parent/child relationships between the commits, so we show |
| them disconnected. |
| |
| --full-history with parent rewriting:: |
| |
| Ordinary commits are only included if they are !TREESAME |
| (though this can be changed, see '\--sparse' below). |
| + |
| Merges are always included. However, their parent list is rewritten: |
| Along each parent, prune away commits that are not included |
| themselves. This results in |
| + |
| ----------------------------------------------------------------------- |
| .-A---M---N---O---P |
| / / / / / |
| I B / D / |
| \ / / / / |
| `-------------' |
| ----------------------------------------------------------------------- |
| + |
| Compare to '\--full-history' without rewriting above. Note that `E` |
| was pruned away because it is TREESAME, but the parent list of P was |
| rewritten to contain `E`'s parent `I`. The same happened for `C` and |
| `N`. Note also that `P` was included despite being TREESAME. |
| |
| In addition to the above settings, you can change whether TREESAME |
| affects inclusion: |
| |
| --dense:: |
| |
| Commits that are walked are included if they are not TREESAME |
| to any parent. |
| |
| --sparse:: |
| |
| All commits that are walked are included. |
| + |
| Note that without '\--full-history', this still simplifies merges: if |
| one of the parents is TREESAME, we follow only that one, so the other |
| sides of the merge are never walked. |
| |
| --simplify-merges:: |
| |
| First, build a history graph in the same way that |
| '\--full-history' with parent rewriting does (see above). |
| + |
| Then simplify each commit `C` to its replacement `C'` in the final |
| history according to the following rules: |
| + |
| -- |
| * Set `C'` to `C`. |
| + |
| * Replace each parent `P` of `C'` with its simplification `P'`. In |
| the process, drop parents that are ancestors of other parents, and |
| remove duplicates. |
| + |
| * If after this parent rewriting, `C'` is a root or merge commit (has |
| zero or >1 parents), a boundary commit, or !TREESAME, it remains. |
| Otherwise, it is replaced with its only parent. |
| -- |
| + |
| The effect of this is best shown by way of comparing to |
| '\--full-history' with parent rewriting. The example turns into: |
| + |
| ----------------------------------------------------------------------- |
| .-A---M---N---O |
| / / / |
| I B D |
| \ / / |
| `---------' |
| ----------------------------------------------------------------------- |
| + |
| Note the major differences in `N` and `P` over '--full-history': |
| + |
| -- |
| * `N`'s parent list had `I` removed, because it is an ancestor of the |
| other parent `M`. Still, `N` remained because it is !TREESAME. |
| + |
| * `P`'s parent list similarly had `I` removed. `P` was then |
| removed completely, because it had one parent and is TREESAME. |
| -- |
| |
| Finally, there is a fifth simplification mode available: |
| |
| --ancestry-path:: |
| |
| Limit the displayed commits to those directly on the ancestry |
| chain between the "from" and "to" commits in the given commit |
| range. I.e. only display commits that are ancestor of the "to" |
| commit, and descendants of the "from" commit. |
| + |
| As an example use case, consider the following commit history: |
| + |
| ----------------------------------------------------------------------- |
| D---E-------F |
| / \ \ |
| B---C---G---H---I---J |
| / \ |
| A-------K---------------L--M |
| ----------------------------------------------------------------------- |
| + |
| A regular 'D..M' computes the set of commits that are ancestors of `M`, |
| but excludes the ones that are ancestors of `D`. This is useful to see |
| what happened to the history leading to `M` since `D`, in the sense |
| that "what does `M` have that did not exist in `D`". The result in this |
| example would be all the commits, except `A` and `B` (and `D` itself, |
| of course). |
| + |
| When we want to find out what commits in `M` are contaminated with the |
| bug introduced by `D` and need fixing, however, we might want to view |
| only the subset of 'D..M' that are actually descendants of `D`, i.e. |
| excluding `C` and `K`. This is exactly what the '--ancestry-path' |
| option does. Applied to the 'D..M' range, it results in: |
| + |
| ----------------------------------------------------------------------- |
| E-------F |
| \ \ |
| G---H---I---J |
| \ |
| L--M |
| ----------------------------------------------------------------------- |
| |
| The '\--simplify-by-decoration' option allows you to view only the |
| big picture of the topology of the history, by omitting commits |
| that are not referenced by tags. Commits are marked as !TREESAME |
| (in other words, kept after history simplification rules described |
| above) if (1) they are referenced by tags, or (2) they change the |
| contents of the paths given on the command line. All other |
| commits are marked as TREESAME (subject to be simplified away). |
| |
| ifdef::git-rev-list[] |
| Bisection Helpers |
| ~~~~~~~~~~~~~~~~~ |
| |
| --bisect:: |
| |
| Limit output to the one commit object which is roughly halfway between |
| included and excluded commits. Note that the bad bisection ref |
| `refs/bisect/bad` is added to the included commits (if it |
| exists) and the good bisection refs `refs/bisect/good-*` are |
| added to the excluded commits (if they exist). Thus, supposing there |
| are no refs in `refs/bisect/`, if |
| |
| ----------------------------------------------------------------------- |
| $ git rev-list --bisect foo ^bar ^baz |
| ----------------------------------------------------------------------- |
| |
| outputs 'midpoint', the output of the two commands |
| |
| ----------------------------------------------------------------------- |
| $ git rev-list foo ^midpoint |
| $ git rev-list midpoint ^bar ^baz |
| ----------------------------------------------------------------------- |
| |
| would be of roughly the same length. Finding the change which |
| introduces a regression is thus reduced to a binary search: repeatedly |
| generate and test new 'midpoint's until the commit chain is of length |
| one. |
| |
| --bisect-vars:: |
| |
| This calculates the same as `--bisect`, except that refs in |
| `refs/bisect/` are not used, and except that this outputs |
| text ready to be eval'ed by the shell. These lines will assign the |
| name of the midpoint revision to the variable `bisect_rev`, and the |
| expected number of commits to be tested after `bisect_rev` is tested |
| to `bisect_nr`, the expected number of commits to be tested if |
| `bisect_rev` turns out to be good to `bisect_good`, the expected |
| number of commits to be tested if `bisect_rev` turns out to be bad to |
| `bisect_bad`, and the number of commits we are bisecting right now to |
| `bisect_all`. |
| |
| --bisect-all:: |
| |
| This outputs all the commit objects between the included and excluded |
| commits, ordered by their distance to the included and excluded |
| commits. Refs in `refs/bisect/` are not used. The farthest |
| from them is displayed first. (This is the only one displayed by |
| `--bisect`.) |
| + |
| This is useful because it makes it easy to choose a good commit to |
| test when you want to avoid to test some of them for some reason (they |
| may not compile for example). |
| + |
| This option can be used along with `--bisect-vars`, in this case, |
| after all the sorted commit objects, there will be the same text as if |
| `--bisect-vars` had been used alone. |
| endif::git-rev-list[] |
| |
| |
| Commit Ordering |
| ~~~~~~~~~~~~~~~ |
| |
| By default, the commits are shown in reverse chronological order. |
| |
| --date-order:: |
| Show no parents before all of its children are shown, but |
| otherwise show commits in the commit timestamp order. |
| |
| --topo-order:: |
| Show no parents before all of its children are shown, and |
| avoid showing commits on multiple lines of history |
| intermixed. |
| + |
| For example, in a commit history like this: |
| + |
| ---------------------------------------------------------------- |
| |
| ---1----2----4----7 |
| \ \ |
| 3----5----6----8--- |
| |
| ---------------------------------------------------------------- |
| + |
| where the numbers denote the order of commit timestamps, `git |
| rev-list` and friends with `--date-order` show the commits in the |
| timestamp order: 8 7 6 5 4 3 2 1. |
| + |
| With `--topo-order`, they would show 8 6 5 3 7 4 2 1 (or 8 7 4 2 6 5 |
| 3 1); some older commits are shown before newer ones in order to |
| avoid showing the commits from two parallel development track mixed |
| together. |
| |
| --reverse:: |
| |
| Output the commits in reverse order. |
| Cannot be combined with '\--walk-reflogs'. |
| |
| Object Traversal |
| ~~~~~~~~~~~~~~~~ |
| |
| These options are mostly targeted for packing of Git repositories. |
| |
| --objects:: |
| |
| Print the object IDs of any object referenced by the listed |
| commits. '--objects foo ^bar' thus means "send me |
| all object IDs which I need to download if I have the commit |
| object 'bar', but not 'foo'". |
| |
| --objects-edge:: |
| |
| Similar to '--objects', but also print the IDs of excluded |
| commits prefixed with a "-" character. This is used by |
| linkgit:git-pack-objects[1] to build "thin" pack, which records |
| objects in deltified form based on objects contained in these |
| excluded commits to reduce network traffic. |
| |
| --unpacked:: |
| |
| Only useful with '--objects'; print the object IDs that are not |
| in packs. |
| |
| --no-walk[=(sorted|unsorted)]:: |
| |
| Only show the given commits, but do not traverse their ancestors. |
| This has no effect if a range is specified. If the argument |
| "unsorted" is given, the commits are show in the order they were |
| given on the command line. Otherwise (if "sorted" or no argument |
| was given), the commits are show in reverse chronological order |
| by commit time. |
| |
| --do-walk:: |
| |
| Overrides a previous --no-walk. |
| |
| Commit Formatting |
| ~~~~~~~~~~~~~~~~~ |
| |
| ifdef::git-rev-list[] |
| Using these options, linkgit:git-rev-list[1] will act similar to the |
| more specialized family of commit log tools: linkgit:git-log[1], |
| linkgit:git-show[1], and linkgit:git-whatchanged[1] |
| endif::git-rev-list[] |
| |
| include::pretty-options.txt[] |
| |
| --relative-date:: |
| |
| Synonym for `--date=relative`. |
| |
| --date=(relative|local|default|iso|rfc|short|raw):: |
| |
| Only takes effect for dates shown in human-readable format, such |
| as when using "--pretty". `log.date` config variable sets a default |
| value for log command's --date option. |
| + |
| `--date=relative` shows dates relative to the current time, |
| e.g. "2 hours ago". |
| + |
| `--date=local` shows timestamps in user's local timezone. |
| + |
| `--date=iso` (or `--date=iso8601`) shows timestamps in ISO 8601 format. |
| + |
| `--date=rfc` (or `--date=rfc2822`) shows timestamps in RFC 2822 |
| format, often found in E-mail messages. |
| + |
| `--date=short` shows only date but not time, in `YYYY-MM-DD` format. |
| + |
| `--date=raw` shows the date in the internal raw Git format `%s %z` format. |
| + |
| `--date=default` shows timestamps in the original timezone |
| (either committer's or author's). |
| |
| ifdef::git-rev-list[] |
| --header:: |
| |
| Print the contents of the commit in raw-format; each record is |
| separated with a NUL character. |
| endif::git-rev-list[] |
| |
| --parents:: |
| |
| Print also the parents of the commit (in the form "commit parent..."). |
| Also enables parent rewriting, see 'History Simplification' below. |
| |
| --children:: |
| |
| Print also the children of the commit (in the form "commit child..."). |
| Also enables parent rewriting, see 'History Simplification' below. |
| |
| ifdef::git-rev-list[] |
| --timestamp:: |
| Print the raw commit timestamp. |
| endif::git-rev-list[] |
| |
| --left-right:: |
| |
| Mark which side of a symmetric diff a commit is reachable from. |
| Commits from the left side are prefixed with `<` and those from |
| the right with `>`. If combined with `--boundary`, those |
| commits are prefixed with `-`. |
| + |
| For example, if you have this topology: |
| + |
| ----------------------------------------------------------------------- |
| y---b---b branch B |
| / \ / |
| / . |
| / / \ |
| o---x---a---a branch A |
| ----------------------------------------------------------------------- |
| + |
| you would get an output like this: |
| + |
| ----------------------------------------------------------------------- |
| $ git rev-list --left-right --boundary --pretty=oneline A...B |
| |
| >bbbbbbb... 3rd on b |
| >bbbbbbb... 2nd on b |
| <aaaaaaa... 3rd on a |
| <aaaaaaa... 2nd on a |
| -yyyyyyy... 1st on b |
| -xxxxxxx... 1st on a |
| ----------------------------------------------------------------------- |
| |
| --graph:: |
| |
| Draw a text-based graphical representation of the commit history |
| on the left hand side of the output. This may cause extra lines |
| to be printed in between commits, in order for the graph history |
| to be drawn properly. |
| + |
| This enables parent rewriting, see 'History Simplification' below. |
| + |
| This implies the '--topo-order' option by default, but the |
| '--date-order' option may also be specified. |
| |
| ifdef::git-rev-list[] |
| --count:: |
| Print a number stating how many commits would have been |
| listed, and suppress all other output. When used together |
| with '--left-right', instead print the counts for left and |
| right commits, separated by a tab. When used together with |
| '--cherry-mark', omit patch equivalent commits from these |
| counts and print the count for equivalent commits separated |
| by a tab. |
| endif::git-rev-list[] |
| |
| |
| ifndef::git-rev-list[] |
| Diff Formatting |
| ~~~~~~~~~~~~~~~ |
| |
| Below are listed options that control the formatting of diff output. |
| Some of them are specific to linkgit:git-rev-list[1], however other diff |
| options may be given. See linkgit:git-diff-files[1] for more options. |
| |
| -c:: |
| |
| With this option, diff output for a merge commit |
| shows the differences from each of the parents to the merge result |
| simultaneously instead of showing pairwise diff between a parent |
| and the result one at a time. Furthermore, it lists only files |
| which were modified from all parents. |
| |
| --cc:: |
| |
| This flag implies the '-c' option and further compresses the |
| patch output by omitting uninteresting hunks whose contents in |
| the parents have only two variants and the merge result picks |
| one of them without modification. |
| |
| -m:: |
| |
| This flag makes the merge commits show the full diff like |
| regular commits; for each merge parent, a separate log entry |
| and diff is generated. An exception is that only diff against |
| the first parent is shown when '--first-parent' option is given; |
| in that case, the output represents the changes the merge |
| brought _into_ the then-current branch. |
| |
| -r:: |
| |
| Show recursive diffs. |
| |
| -t:: |
| |
| Show the tree objects in the diff output. This implies '-r'. |
| |
| -s:: |
| Suppress diff output. |
| endif::git-rev-list[] |