| gitdiffcore(7) |
| ============== |
| |
| NAME |
| ---- |
| gitdiffcore - Tweaking diff output |
| |
| SYNOPSIS |
| -------- |
| [verse] |
| 'git diff' * |
| |
| DESCRIPTION |
| ----------- |
| |
| The diff commands 'git diff-index', 'git diff-files', and 'git diff-tree' |
| can be told to manipulate differences they find in |
| unconventional ways before showing 'diff' output. The manipulation |
| is collectively called "diffcore transformation". This short note |
| describes what they are and how to use them to produce 'diff' output |
| that is easier to understand than the conventional kind. |
| |
| |
| The chain of operation |
| ---------------------- |
| |
| The 'git diff-{asterisk}' family works by first comparing two sets of |
| files: |
| |
| - 'git diff-index' compares contents of a "tree" object and the |
| working directory (when '\--cached' flag is not used) or a |
| "tree" object and the index file (when '\--cached' flag is |
| used); |
| |
| - 'git diff-files' compares contents of the index file and the |
| working directory; |
| |
| - 'git diff-tree' compares contents of two "tree" objects; |
| |
| In all of these cases, the commands themselves first optionally limit |
| the two sets of files by any pathspecs given on their command-lines, |
| and compare corresponding paths in the two resulting sets of files. |
| |
| The pathspecs are used to limit the world diff operates in. They remove |
| the filepairs outside the specified sets of pathnames. E.g. If the |
| input set of filepairs included: |
| |
| ------------------------------------------------ |
| :100644 100644 bcd1234... 0123456... M junkfile |
| ------------------------------------------------ |
| |
| but the command invocation was `git diff-files myfile`, then the |
| junkfile entry would be removed from the list because only "myfile" |
| is under consideration. |
| |
| The result of comparison is passed from these commands to what is |
| internally called "diffcore", in a format similar to what is output |
| when the -p option is not used. E.g. |
| |
| ------------------------------------------------ |
| in-place edit :100644 100644 bcd1234... 0123456... M file0 |
| create :000000 100644 0000000... 1234567... A file4 |
| delete :100644 000000 1234567... 0000000... D file5 |
| unmerged :000000 000000 0000000... 0000000... U file6 |
| ------------------------------------------------ |
| |
| The diffcore mechanism is fed a list of such comparison results |
| (each of which is called "filepair", although at this point each |
| of them talks about a single file), and transforms such a list |
| into another list. There are currently 5 such transformations: |
| |
| - diffcore-break |
| - diffcore-rename |
| - diffcore-merge-broken |
| - diffcore-pickaxe |
| - diffcore-order |
| |
| These are applied in sequence. The set of filepairs 'git diff-{asterisk}' |
| commands find are used as the input to diffcore-break, and |
| the output from diffcore-break is used as the input to the |
| next transformation. The final result is then passed to the |
| output routine and generates either diff-raw format (see Output |
| format sections of the manual for 'git diff-{asterisk}' commands) or |
| diff-patch format. |
| |
| |
| diffcore-break: For Splitting Up "Complete Rewrites" |
| ---------------------------------------------------- |
| |
| The second transformation in the chain is diffcore-break, and is |
| controlled by the -B option to the 'git diff-{asterisk}' commands. This is |
| used to detect a filepair that represents "complete rewrite" and |
| break such filepair into two filepairs that represent delete and |
| create. E.g. If the input contained this filepair: |
| |
| ------------------------------------------------ |
| :100644 100644 bcd1234... 0123456... M file0 |
| ------------------------------------------------ |
| |
| and if it detects that the file "file0" is completely rewritten, |
| it changes it to: |
| |
| ------------------------------------------------ |
| :100644 000000 bcd1234... 0000000... D file0 |
| :000000 100644 0000000... 0123456... A file0 |
| ------------------------------------------------ |
| |
| For the purpose of breaking a filepair, diffcore-break examines |
| the extent of changes between the contents of the files before |
| and after modification (i.e. the contents that have "bcd1234..." |
| and "0123456..." as their SHA1 content ID, in the above |
| example). The amount of deletion of original contents and |
| insertion of new material are added together, and if it exceeds |
| the "break score", the filepair is broken into two. The break |
| score defaults to 50% of the size of the smaller of the original |
| and the result (i.e. if the edit shrinks the file, the size of |
| the result is used; if the edit lengthens the file, the size of |
| the original is used), and can be customized by giving a number |
| after "-B" option (e.g. "-B75" to tell it to use 75%). |
| |
| |
| diffcore-rename: For Detection Renames and Copies |
| ------------------------------------------------- |
| |
| This transformation is used to detect renames and copies, and is |
| controlled by the -M option (to detect renames) and the -C option |
| (to detect copies as well) to the 'git diff-{asterisk}' commands. If the |
| input contained these filepairs: |
| |
| ------------------------------------------------ |
| :100644 000000 0123456... 0000000... D fileX |
| :000000 100644 0000000... 0123456... A file0 |
| ------------------------------------------------ |
| |
| and the contents of the deleted file fileX is similar enough to |
| the contents of the created file file0, then rename detection |
| merges these filepairs and creates: |
| |
| ------------------------------------------------ |
| :100644 100644 0123456... 0123456... R100 fileX file0 |
| ------------------------------------------------ |
| |
| When the "-C" option is used, the original contents of modified files, |
| and deleted files (and also unmodified files, if the |
| "\--find-copies-harder" option is used) are considered as candidates |
| of the source files in rename/copy operation. If the input were like |
| these filepairs, that talk about a modified file fileY and a newly |
| created file file0: |
| |
| ------------------------------------------------ |
| :100644 100644 0123456... 1234567... M fileY |
| :000000 100644 0000000... bcd3456... A file0 |
| ------------------------------------------------ |
| |
| the original contents of fileY and the resulting contents of |
| file0 are compared, and if they are similar enough, they are |
| changed to: |
| |
| ------------------------------------------------ |
| :100644 100644 0123456... 1234567... M fileY |
| :100644 100644 0123456... bcd3456... C100 fileY file0 |
| ------------------------------------------------ |
| |
| In both rename and copy detection, the same "extent of changes" |
| algorithm used in diffcore-break is used to determine if two |
| files are "similar enough", and can be customized to use |
| a similarity score different from the default of 50% by giving a |
| number after the "-M" or "-C" option (e.g. "-M8" to tell it to use |
| 8/10 = 80%). |
| |
| Note. When the "-C" option is used with `--find-copies-harder` |
| option, 'git diff-{asterisk}' commands feed unmodified filepairs to |
| diffcore mechanism as well as modified ones. This lets the copy |
| detector consider unmodified files as copy source candidates at |
| the expense of making it slower. Without `--find-copies-harder`, |
| 'git diff-{asterisk}' commands can detect copies only if the file that was |
| copied happened to have been modified in the same changeset. |
| |
| |
| diffcore-merge-broken: For Putting "Complete Rewrites" Back Together |
| -------------------------------------------------------------------- |
| |
| This transformation is used to merge filepairs broken by |
| diffcore-break, and not transformed into rename/copy by |
| diffcore-rename, back into a single modification. This always |
| runs when diffcore-break is used. |
| |
| For the purpose of merging broken filepairs back, it uses a |
| different "extent of changes" computation from the ones used by |
| diffcore-break and diffcore-rename. It counts only the deletion |
| from the original, and does not count insertion. If you removed |
| only 10 lines from a 100-line document, even if you added 910 |
| new lines to make a new 1000-line document, you did not do a |
| complete rewrite. diffcore-break breaks such a case in order to |
| help diffcore-rename to consider such filepairs as candidate of |
| rename/copy detection, but if filepairs broken that way were not |
| matched with other filepairs to create rename/copy, then this |
| transformation merges them back into the original |
| "modification". |
| |
| The "extent of changes" parameter can be tweaked from the |
| default 80% (that is, unless more than 80% of the original |
| material is deleted, the broken pairs are merged back into a |
| single modification) by giving a second number to -B option, |
| like these: |
| |
| * -B50/60 (give 50% "break score" to diffcore-break, use 60% |
| for diffcore-merge-broken). |
| |
| * -B/60 (the same as above, since diffcore-break defaults to 50%). |
| |
| Note that earlier implementation left a broken pair as a separate |
| creation and deletion patches. This was an unnecessary hack and |
| the latest implementation always merges all the broken pairs |
| back into modifications, but the resulting patch output is |
| formatted differently for easier review in case of such |
| a complete rewrite by showing the entire contents of old version |
| prefixed with '-', followed by the entire contents of new |
| version prefixed with '+'. |
| |
| |
| diffcore-pickaxe: For Detecting Addition/Deletion of Specified String |
| --------------------------------------------------------------------- |
| |
| This transformation is used to find filepairs that represent |
| changes that touch a specified string, and is controlled by the |
| -S option and the `--pickaxe-all` option to the 'git diff-*' |
| commands. |
| |
| When diffcore-pickaxe is in use, it checks if there are |
| filepairs whose "result" side and whose "origin" side have |
| different number of specified string. Such a filepair represents |
| "the string appeared in this changeset". It also checks for the |
| opposite case that loses the specified string. |
| |
| When `--pickaxe-all` is not in effect, diffcore-pickaxe leaves |
| only such filepairs that touch the specified string in its |
| output. When `--pickaxe-all` is used, diffcore-pickaxe leaves all |
| filepairs intact if there is such a filepair, or makes the |
| output empty otherwise. The latter behaviour is designed to |
| make reviewing of the changes in the context of the whole |
| changeset easier. |
| |
| |
| diffcore-order: For Sorting the Output Based on Filenames |
| --------------------------------------------------------- |
| |
| This is used to reorder the filepairs according to the user's |
| (or project's) taste, and is controlled by the -O option to the |
| 'git diff-{asterisk}' commands. |
| |
| This takes a text file each of whose lines is a shell glob |
| pattern. Filepairs that match a glob pattern on an earlier line |
| in the file are output before ones that match a later line, and |
| filepairs that do not match any glob pattern are output last. |
| |
| As an example, a typical orderfile for the core Git probably |
| would look like this: |
| |
| ------------------------------------------------ |
| README |
| Makefile |
| Documentation |
| *.h |
| *.c |
| t |
| ------------------------------------------------ |
| |
| SEE ALSO |
| -------- |
| linkgit:git-diff[1], |
| linkgit:git-diff-files[1], |
| linkgit:git-diff-index[1], |
| linkgit:git-diff-tree[1], |
| linkgit:git-format-patch[1], |
| linkgit:git-log[1], |
| linkgit:gitglossary[7], |
| link:user-manual.html[The Git User's Manual] |
| |
| GIT |
| --- |
| Part of the linkgit:git[1] suite. |