blob: f0be4b4560f7a47a1d3f7e42ee0d879fb95028a7 [file] [log] [blame]
#!/usr/bin/perl
#
# Copyright 2002,2005 Greg Kroah-Hartman <greg@kroah.com>
# Copyright 2005 Ryan Anderson <ryan@michonline.com>
#
# GPL v2 (See COPYING)
#
# Ported to support git "mbox" format files by Ryan Anderson <ryan@michonline.com>
#
# Sends a collection of emails to the given email addresses, disturbingly fast.
#
# Supports two formats:
# 1. mbox format files (ignoring most headers and MIME formatting - this is designed for sending patches)
# 2. The original format support by Greg's script:
# first line of the message is who to CC,
# and second line is the subject of the message.
#
use 5.008001;
use strict;
use warnings $ENV{GIT_PERL_FATAL_WARNINGS} ? qw(FATAL all) : ();
use Getopt::Long;
use Git::LoadCPAN::Error qw(:try);
use Git;
use Git::I18N;
Getopt::Long::Configure qw/ pass_through /;
sub usage {
print <<EOT;
git send-email [<options>] <file|directory>
git send-email [<options>] <format-patch options>
git send-email --dump-aliases
Composing:
--from <str> * Email From:
--[no-]to <str> * Email To:
--[no-]cc <str> * Email Cc:
--[no-]bcc <str> * Email Bcc:
--subject <str> * Email "Subject:"
--reply-to <str> * Email "Reply-To:"
--in-reply-to <str> * Email "In-Reply-To:"
--[no-]xmailer * Add "X-Mailer:" header (default).
--[no-]annotate * Review each patch that will be sent in an editor.
--compose * Open an editor for introduction.
--compose-encoding <str> * Encoding to assume for introduction.
--8bit-encoding <str> * Encoding to assume 8bit mails if undeclared
--transfer-encoding <str> * Transfer encoding to use (quoted-printable, 8bit, base64)
Sending:
--envelope-sender <str> * Email envelope sender.
--sendmail-cmd <str> * Command to run to send email.
--smtp-server <str:int> * Outgoing SMTP server to use. The port
is optional. Default 'localhost'.
--smtp-server-option <str> * Outgoing SMTP server option to use.
--smtp-server-port <int> * Outgoing SMTP server port.
--smtp-user <str> * Username for SMTP-AUTH.
--smtp-pass <str> * Password for SMTP-AUTH; not necessary.
--smtp-encryption <str> * tls or ssl; anything else disables.
--smtp-ssl * Deprecated. Use '--smtp-encryption ssl'.
--smtp-ssl-cert-path <str> * Path to ca-certificates (either directory or file).
Pass an empty string to disable certificate
verification.
--smtp-domain <str> * The domain name sent to HELO/EHLO handshake
--smtp-auth <str> * Space-separated list of allowed AUTH mechanisms, or
"none" to disable authentication.
This setting forces to use one of the listed mechanisms.
--no-smtp-auth Disable SMTP authentication. Shorthand for
`--smtp-auth=none`
--smtp-debug <0|1> * Disable, enable Net::SMTP debug.
--batch-size <int> * send max <int> message per connection.
--relogin-delay <int> * delay <int> seconds between two successive login.
This option can only be used with --batch-size
Automating:
--identity <str> * Use the sendemail.<id> options.
--to-cmd <str> * Email To: via `<str> \$patch_path`.
--cc-cmd <str> * Email Cc: via `<str> \$patch_path`.
--header-cmd <str> * Add headers via `<str> \$patch_path`.
--no-header-cmd * Disable any header command in use.
--suppress-cc <str> * author, self, sob, cc, cccmd, body, bodycc, misc-by, all.
--[no-]cc-cover * Email Cc: addresses in the cover letter.
--[no-]to-cover * Email To: addresses in the cover letter.
--[no-]signed-off-by-cc * Send to Signed-off-by: addresses. Default on.
--[no-]suppress-from * Send to self. Default off.
--[no-]chain-reply-to * Chain In-Reply-To: fields. Default off.
--[no-]thread * Use In-Reply-To: field. Default on.
Administering:
--confirm <str> * Confirm recipients before sending;
auto, cc, compose, always, or never.
--quiet * Output one line of info per email.
--dry-run * Don't actually send the emails.
--[no-]validate * Perform patch sanity checks. Default on.
--[no-]format-patch * understand any non optional arguments as
`git format-patch` ones.
--force * Send even if safety checks would prevent it.
Information:
--dump-aliases * Dump configured aliases and exit.
EOT
exit(1);
}
sub uniq {
my %seen;
grep !$seen{$_}++, @_;
}
sub completion_helper {
my ($original_opts) = @_;
my %not_for_completion = (
"git-completion-helper" => undef,
"h" => undef,
);
my @send_email_opts = ();
foreach my $key (keys %$original_opts) {
unless (exists $not_for_completion{$key}) {
my $negatable = ($key =~ s/!$//);
if ($key =~ /[:=][si]$/) {
$key =~ s/[:=][si]$//;
push (@send_email_opts, "--$_=") foreach (split (/\|/, $key));
} else {
push (@send_email_opts, "--$_") foreach (split (/\|/, $key));
if ($negatable) {
push (@send_email_opts, "--no-$_") foreach (split (/\|/, $key));
}
}
}
}
my @format_patch_opts = split(/ /, Git::command('format-patch', '--git-completion-helper'));
my @opts = (@send_email_opts, @format_patch_opts);
@opts = uniq (grep !/^$/, @opts);
# There's an implicit '\n' here already, no need to add an explicit one.
print "@opts";
exit(0);
}
# most mail servers generate the Date: header, but not all...
sub format_2822_time {
my ($time) = @_;
my @localtm = localtime($time);
my @gmttm = gmtime($time);
my $localmin = $localtm[1] + $localtm[2] * 60;
my $gmtmin = $gmttm[1] + $gmttm[2] * 60;
if ($localtm[0] != $gmttm[0]) {
die __("local zone differs from GMT by a non-minute interval\n");
}
if ((($gmttm[6] + 1) % 7) == $localtm[6]) {
$localmin += 1440;
} elsif ((($gmttm[6] - 1) % 7) == $localtm[6]) {
$localmin -= 1440;
} elsif ($gmttm[6] != $localtm[6]) {
die __("local time offset greater than or equal to 24 hours\n");
}
my $offset = $localmin - $gmtmin;
my $offhour = $offset / 60;
my $offmin = abs($offset % 60);
if (abs($offhour) >= 24) {
die __("local time offset greater than or equal to 24 hours\n");
}
return sprintf("%s, %2d %s %d %02d:%02d:%02d %s%02d%02d",
qw(Sun Mon Tue Wed Thu Fri Sat)[$localtm[6]],
$localtm[3],
qw(Jan Feb Mar Apr May Jun
Jul Aug Sep Oct Nov Dec)[$localtm[4]],
$localtm[5]+1900,
$localtm[2],
$localtm[1],
$localtm[0],
($offset >= 0) ? '+' : '-',
abs($offhour),
$offmin,
);
}
my $smtp;
my $auth;
my $num_sent = 0;
# Regexes for RFC 2047 productions.
my $re_token = qr/[^][()<>@,;:\\"\/?.= \000-\037\177-\377]+/;
my $re_encoded_text = qr/[^? \000-\037\177-\377]+/;
my $re_encoded_word = qr/=\?($re_token)\?($re_token)\?($re_encoded_text)\?=/;
# Variables we fill in automatically, or via prompting:
my (@to,@cc,@xh,$envelope_sender,
$initial_in_reply_to,$reply_to,$initial_subject,@files,
$author,$sender,$smtp_authpass,$annotate,$compose,$time);
# Things we either get from config, *or* are overridden on the
# command-line.
my ($no_cc, $no_to, $no_bcc, $no_identity, $no_header_cmd);
my (@config_to, @getopt_to);
my (@config_cc, @getopt_cc);
my (@config_bcc, @getopt_bcc);
# Example reply to:
#$initial_in_reply_to = ''; #<20050203173208.GA23964@foobar.com>';
my $repo = eval { Git->repository() };
my @repo = $repo ? ($repo) : ();
# Behavior modification variables
my ($quiet, $dry_run) = (0, 0);
my $format_patch;
my $compose_filename;
my $force = 0;
my $dump_aliases = 0;
# Variables to prevent short format-patch options from being captured
# as abbreviated send-email options
my $reroll_count;
# Handle interactive edition of files.
my $multiedit;
my $editor;
sub system_or_msg {
my ($args, $msg, $cmd_name) = @_;
system(@$args);
my $signalled = $? & 127;
my $exit_code = $? >> 8;
return unless $signalled or $exit_code;
my @sprintf_args = ($cmd_name ? $cmd_name : $args->[0], $exit_code);
if (defined $msg) {
# Quiet the 'redundant' warning category, except we
# need to support down to Perl 5.8.1, so we can't do a
# "no warnings 'redundant'", since that category was
# introduced in perl 5.22, and asking for it will die
# on older perls.
no warnings;
return sprintf($msg, @sprintf_args);
}
return sprintf(__("fatal: command '%s' died with exit code %d"),
@sprintf_args);
}
sub system_or_die {
my $msg = system_or_msg(@_);
die $msg if $msg;
}
sub do_edit {
if (!defined($editor)) {
$editor = Git::command_oneline('var', 'GIT_EDITOR');
}
my $die_msg = __("the editor exited uncleanly, aborting everything");
if (defined($multiedit) && !$multiedit) {
system_or_die(['sh', '-c', $editor.' "$@"', $editor, $_], $die_msg) for @_;
} else {
system_or_die(['sh', '-c', $editor.' "$@"', $editor, @_], $die_msg);
}
}
# Variables with corresponding config settings
my ($suppress_from, $signed_off_by_cc);
my ($cover_cc, $cover_to);
my ($to_cmd, $cc_cmd, $header_cmd);
my ($smtp_server, $smtp_server_port, @smtp_server_options);
my ($smtp_authuser, $smtp_encryption, $smtp_ssl_cert_path);
my ($batch_size, $relogin_delay);
my ($identity, $aliasfiletype, @alias_files, $smtp_domain, $smtp_auth);
my ($confirm);
my (@suppress_cc);
my ($auto_8bit_encoding);
my ($compose_encoding);
my ($sendmail_cmd);
# Variables with corresponding config settings & hardcoded defaults
my ($debug_net_smtp) = 0; # Net::SMTP, see send_message()
my $thread = 1;
my $chain_reply_to = 0;
my $use_xmailer = 1;
my $validate = 1;
my $target_xfer_encoding = 'auto';
my $forbid_sendmail_variables = 1;
my %config_bool_settings = (
"thread" => \$thread,
"chainreplyto" => \$chain_reply_to,
"suppressfrom" => \$suppress_from,
"signedoffbycc" => \$signed_off_by_cc,
"cccover" => \$cover_cc,
"tocover" => \$cover_to,
"signedoffcc" => \$signed_off_by_cc,
"validate" => \$validate,
"multiedit" => \$multiedit,
"annotate" => \$annotate,
"xmailer" => \$use_xmailer,
"forbidsendmailvariables" => \$forbid_sendmail_variables,
);
my %config_settings = (
"smtpencryption" => \$smtp_encryption,
"smtpserver" => \$smtp_server,
"smtpserverport" => \$smtp_server_port,
"smtpserveroption" => \@smtp_server_options,
"smtpuser" => \$smtp_authuser,
"smtppass" => \$smtp_authpass,
"smtpdomain" => \$smtp_domain,
"smtpauth" => \$smtp_auth,
"smtpbatchsize" => \$batch_size,
"smtprelogindelay" => \$relogin_delay,
"to" => \@config_to,
"tocmd" => \$to_cmd,
"cc" => \@config_cc,
"cccmd" => \$cc_cmd,
"headercmd" => \$header_cmd,
"aliasfiletype" => \$aliasfiletype,
"bcc" => \@config_bcc,
"suppresscc" => \@suppress_cc,
"envelopesender" => \$envelope_sender,
"confirm" => \$confirm,
"from" => \$sender,
"assume8bitencoding" => \$auto_8bit_encoding,
"composeencoding" => \$compose_encoding,
"transferencoding" => \$target_xfer_encoding,
"sendmailcmd" => \$sendmail_cmd,
);
my %config_path_settings = (
"aliasesfile" => \@alias_files,
"smtpsslcertpath" => \$smtp_ssl_cert_path,
);
# Handle Uncouth Termination
sub signal_handler {
# Make text normal
require Term::ANSIColor;
print Term::ANSIColor::color("reset"), "\n";
# SMTP password masked
system "stty echo";
# tmp files from --compose
if (defined $compose_filename) {
if (-e $compose_filename) {
printf __("'%s' contains an intermediate version ".
"of the email you were composing.\n"),
$compose_filename;
}
if (-e ($compose_filename . ".final")) {
printf __("'%s.final' contains the composed email.\n"),
$compose_filename;
}
}
exit;
};
$SIG{TERM} = \&signal_handler;
$SIG{INT} = \&signal_handler;
# Read our sendemail.* config
sub read_config {
my ($known_keys, $configured, $prefix) = @_;
foreach my $setting (keys %config_bool_settings) {
my $target = $config_bool_settings{$setting};
my $key = "$prefix.$setting";
next unless exists $known_keys->{$key};
my $v = (@{$known_keys->{$key}} == 1 &&
(defined $known_keys->{$key}->[0] &&
$known_keys->{$key}->[0] =~ /^(?:true|false)$/s))
? $known_keys->{$key}->[0] eq 'true'
: Git::config_bool(@repo, $key);
next unless defined $v;
next if $configured->{$setting}++;
$$target = $v;
}
foreach my $setting (keys %config_path_settings) {
my $target = $config_path_settings{$setting};
my $key = "$prefix.$setting";
next unless exists $known_keys->{$key};
if (ref($target) eq "ARRAY") {
my @values = Git::config_path(@repo, $key);
next unless @values;
next if $configured->{$setting}++;
@$target = @values;
}
else {
my $v = Git::config_path(@repo, "$prefix.$setting");
next unless defined $v;
next if $configured->{$setting}++;
$$target = $v;
}
}
foreach my $setting (keys %config_settings) {
my $target = $config_settings{$setting};
my $key = "$prefix.$setting";
next unless exists $known_keys->{$key};
if (ref($target) eq "ARRAY") {
my @values = @{$known_keys->{$key}};
@values = grep { defined } @values;
next if $configured->{$setting}++;
@$target = @values;
}
else {
my $v = $known_keys->{$key}->[-1];
next unless defined $v;
next if $configured->{$setting}++;
$$target = $v;
}
}
}
sub config_regexp {
my ($regex) = @_;
my @ret;
eval {
my $ret = Git::command(
'config',
'--null',
'--get-regexp',
$regex,
);
@ret = map {
# We must always return ($k, $v) here, since
# empty config values will be just "key\0",
# not "key\nvalue\0".
my ($k, $v) = split /\n/, $_, 2;
($k, $v);
} split /\0/, $ret;
1;
} or do {
# If we have no keys we're OK, otherwise re-throw
die $@ if $@->value != 1;
};
return @ret;
}
# Save ourselves a lot of work of shelling out to 'git config' (it
# parses 'bool' etc.) by only doing so for config keys that exist.
my %known_config_keys;
{
my @kv = config_regexp("^sende?mail[.]");
while (my ($k, $v) = splice @kv, 0, 2) {
push @{$known_config_keys{$k}} => $v;
}
}
# sendemail.identity yields to --identity. We must parse this
# special-case first before the rest of the config is read.
{
my $key = "sendemail.identity";
$identity = Git::config(@repo, $key) if exists $known_config_keys{$key};
}
my %identity_options = (
"identity=s" => \$identity,
"no-identity" => \$no_identity,
);
my $rc = GetOptions(%identity_options);
usage() unless $rc;
undef $identity if $no_identity;
# Now we know enough to read the config
{
my %configured;
read_config(\%known_config_keys, \%configured, "sendemail.$identity") if defined $identity;
read_config(\%known_config_keys, \%configured, "sendemail");
}
# Begin by accumulating all the variables (defined above), that we will end up
# needing, first, from the command line:
my $help;
my $git_completion_helper;
my %dump_aliases_options = (
"h" => \$help,
"dump-aliases" => \$dump_aliases,
);
$rc = GetOptions(%dump_aliases_options);
usage() unless $rc;
die __("--dump-aliases incompatible with other options\n")
if !$help and $dump_aliases and @ARGV;
my %options = (
"sender|from=s" => \$sender,
"in-reply-to=s" => \$initial_in_reply_to,
"reply-to=s" => \$reply_to,
"subject=s" => \$initial_subject,
"to=s" => \@getopt_to,
"to-cmd=s" => \$to_cmd,
"no-to" => \$no_to,
"cc=s" => \@getopt_cc,
"no-cc" => \$no_cc,
"bcc=s" => \@getopt_bcc,
"no-bcc" => \$no_bcc,
"chain-reply-to!" => \$chain_reply_to,
"sendmail-cmd=s" => \$sendmail_cmd,
"smtp-server=s" => \$smtp_server,
"smtp-server-option=s" => \@smtp_server_options,
"smtp-server-port=s" => \$smtp_server_port,
"smtp-user=s" => \$smtp_authuser,
"smtp-pass:s" => \$smtp_authpass,
"smtp-ssl" => sub { $smtp_encryption = 'ssl' },
"smtp-encryption=s" => \$smtp_encryption,
"smtp-ssl-cert-path=s" => \$smtp_ssl_cert_path,
"smtp-debug:i" => \$debug_net_smtp,
"smtp-domain:s" => \$smtp_domain,
"smtp-auth=s" => \$smtp_auth,
"no-smtp-auth" => sub {$smtp_auth = 'none'},
"annotate!" => \$annotate,
"compose" => \$compose,
"quiet" => \$quiet,
"cc-cmd=s" => \$cc_cmd,
"header-cmd=s" => \$header_cmd,
"no-header-cmd" => \$no_header_cmd,
"suppress-from!" => \$suppress_from,
"suppress-cc=s" => \@suppress_cc,
"signed-off-cc|signed-off-by-cc!" => \$signed_off_by_cc,
"cc-cover!" => \$cover_cc,
"to-cover!" => \$cover_to,
"confirm=s" => \$confirm,
"dry-run" => \$dry_run,
"envelope-sender=s" => \$envelope_sender,
"thread!" => \$thread,
"validate!" => \$validate,
"transfer-encoding=s" => \$target_xfer_encoding,
"format-patch!" => \$format_patch,
"8bit-encoding=s" => \$auto_8bit_encoding,
"compose-encoding=s" => \$compose_encoding,
"force" => \$force,
"xmailer!" => \$use_xmailer,
"batch-size=i" => \$batch_size,
"relogin-delay=i" => \$relogin_delay,
"git-completion-helper" => \$git_completion_helper,
"v=s" => \$reroll_count,
);
$rc = GetOptions(%options);
# Munge any "either config or getopt, not both" variables
my @initial_to = @getopt_to ? @getopt_to : ($no_to ? () : @config_to);
my @initial_cc = @getopt_cc ? @getopt_cc : ($no_cc ? () : @config_cc);
my @initial_bcc = @getopt_bcc ? @getopt_bcc : ($no_bcc ? () : @config_bcc);
usage() if $help;
my %all_options = (%options, %dump_aliases_options, %identity_options);
completion_helper(\%all_options) if $git_completion_helper;
unless ($rc) {
usage();
}
if ($forbid_sendmail_variables && grep { /^sendmail/s } keys %known_config_keys) {
die __("fatal: found configuration options for 'sendmail'\n" .
"git-send-email is configured with the sendemail.* options - note the 'e'.\n" .
"Set sendemail.forbidSendmailVariables to false to disable this check.\n");
}
die __("Cannot run git format-patch from outside a repository\n")
if $format_patch and not $repo;
die __("`batch-size` and `relogin` must be specified together " .
"(via command-line or configuration option)\n")
if defined $relogin_delay and not defined $batch_size;
# 'default' encryption is none -- this only prevents a warning
$smtp_encryption = '' unless (defined $smtp_encryption);
# Set CC suppressions
my(%suppress_cc);
if (@suppress_cc) {
foreach my $entry (@suppress_cc) {
# Please update $__git_send_email_suppresscc_options
# in git-completion.bash when you add new options.
die sprintf(__("Unknown --suppress-cc field: '%s'\n"), $entry)
unless $entry =~ /^(?:all|cccmd|cc|author|self|sob|body|bodycc|misc-by)$/;
$suppress_cc{$entry} = 1;
}
}
if ($suppress_cc{'all'}) {
foreach my $entry (qw (cccmd cc author self sob body bodycc misc-by)) {
$suppress_cc{$entry} = 1;
}
delete $suppress_cc{'all'};
}
# If explicit old-style ones are specified, they trump --suppress-cc.
$suppress_cc{'self'} = $suppress_from if defined $suppress_from;
$suppress_cc{'sob'} = !$signed_off_by_cc if defined $signed_off_by_cc;
if ($suppress_cc{'body'}) {
foreach my $entry (qw (sob bodycc misc-by)) {
$suppress_cc{$entry} = 1;
}
delete $suppress_cc{'body'};
}
# Set confirm's default value
my $confirm_unconfigured = !defined $confirm;
if ($confirm_unconfigured) {
$confirm = scalar %suppress_cc ? 'compose' : 'auto';
};
# Please update $__git_send_email_confirm_options in
# git-completion.bash when you add new options.
die sprintf(__("Unknown --confirm setting: '%s'\n"), $confirm)
unless $confirm =~ /^(?:auto|cc|compose|always|never)/;
# Debugging, print out the suppressions.
if (0) {
print "suppressions:\n";
foreach my $entry (keys %suppress_cc) {
printf " %-5s -> $suppress_cc{$entry}\n", $entry;
}
}
my ($repoauthor, $repocommitter);
{
my %cache;
my ($author, $committer);
my $common = sub {
my ($what) = @_;
return $cache{$what} if exists $cache{$what};
($cache{$what}) = Git::ident_person(@repo, $what);
return $cache{$what};
};
$repoauthor = sub { $common->('author') };
$repocommitter = sub { $common->('committer') };
}
sub parse_address_line {
require Git::LoadCPAN::Mail::Address;
return map { $_->format } Mail::Address->parse($_[0]);
}
sub split_addrs {
require Text::ParseWords;
return Text::ParseWords::quotewords('\s*,\s*', 1, @_);
}
my %aliases;
sub parse_sendmail_alias {
local $_ = shift;
if (/"/) {
printf STDERR __("warning: sendmail alias with quotes is not supported: %s\n"), $_;
} elsif (/:include:/) {
printf STDERR __("warning: `:include:` not supported: %s\n"), $_;
} elsif (/[\/|]/) {
printf STDERR __("warning: `/file` or `|pipe` redirection not supported: %s\n"), $_;
} elsif (/^(\S+?)\s*:\s*(.+)$/) {
my ($alias, $addr) = ($1, $2);
$aliases{$alias} = [ split_addrs($addr) ];
} else {
printf STDERR __("warning: sendmail line is not recognized: %s\n"), $_;
}
}
sub parse_sendmail_aliases {
my $fh = shift;
my $s = '';
while (<$fh>) {
chomp;
next if /^\s*$/ || /^\s*#/;
$s .= $_, next if $s =~ s/\\$// || s/^\s+//;
parse_sendmail_alias($s) if $s;
$s = $_;
}
$s =~ s/\\$//; # silently tolerate stray '\' on last line
parse_sendmail_alias($s) if $s;
}
my %parse_alias = (
# multiline formats can be supported in the future
mutt => sub { my $fh = shift; while (<$fh>) {
if (/^\s*alias\s+(?:-group\s+\S+\s+)*(\S+)\s+(.*)$/) {
my ($alias, $addr) = ($1, $2);
$addr =~ s/#.*$//; # mutt allows # comments
# commas delimit multiple addresses
my @addr = split_addrs($addr);
# quotes may be escaped in the file,
# unescape them so we do not double-escape them later.
s/\\"/"/g foreach @addr;
$aliases{$alias} = \@addr
}}},
mailrc => sub { my $fh = shift; while (<$fh>) {
if (/^alias\s+(\S+)\s+(.*?)\s*$/) {
require Text::ParseWords;
# spaces delimit multiple addresses
$aliases{$1} = [ Text::ParseWords::quotewords('\s+', 0, $2) ];
}}},
pine => sub { my $fh = shift; my $f='\t[^\t]*';
for (my $x = ''; defined($x); $x = $_) {
chomp $x;
$x .= $1 while(defined($_ = <$fh>) && /^ +(.*)$/);
$x =~ /^(\S+)$f\t\(?([^\t]+?)\)?(:?$f){0,2}$/ or next;
$aliases{$1} = [ split_addrs($2) ];
}},
elm => sub { my $fh = shift;
while (<$fh>) {
if (/^(\S+)\s+=\s+[^=]+=\s(\S+)/) {
my ($alias, $addr) = ($1, $2);
$aliases{$alias} = [ split_addrs($addr) ];
}
} },
sendmail => \&parse_sendmail_aliases,
gnus => sub { my $fh = shift; while (<$fh>) {
if (/\(define-mail-alias\s+"(\S+?)"\s+"(\S+?)"\)/) {
$aliases{$1} = [ $2 ];
}}}
# Please update _git_config() in git-completion.bash when you
# add new MUAs.
);
if (@alias_files and $aliasfiletype and defined $parse_alias{$aliasfiletype}) {
foreach my $file (@alias_files) {
open my $fh, '<', $file or die "opening $file: $!\n";
$parse_alias{$aliasfiletype}->($fh);
close $fh;
}
}
if ($dump_aliases) {
print "$_\n" for (sort keys %aliases);
exit(0);
}
# is_format_patch_arg($f) returns 0 if $f names a patch, or 1 if
# $f is a revision list specification to be passed to format-patch.
sub is_format_patch_arg {
return unless $repo;
my $f = shift;
try {
$repo->command('rev-parse', '--verify', '--quiet', $f);
if (defined($format_patch)) {
return $format_patch;
}
die sprintf(__(<<EOF), $f, $f);
File '%s' exists but it could also be the range of commits
to produce patches for. Please disambiguate by...
* Saying "./%s" if you mean a file; or
* Giving --format-patch option if you mean a range.
EOF
} catch Git::Error::Command with {
# Not a valid revision. Treat it as a filename.
return 0;
}
}
# Now that all the defaults are set, process the rest of the command line
# arguments and collect up the files that need to be processed.
my @rev_list_opts;
while (defined(my $f = shift @ARGV)) {
if ($f eq "--") {
push @rev_list_opts, "--", @ARGV;
@ARGV = ();
} elsif (-d $f and !is_format_patch_arg($f)) {
opendir my $dh, $f
or die sprintf(__("Failed to opendir %s: %s"), $f, $!);
require File::Spec;
push @files, grep { -f $_ } map { File::Spec->catfile($f, $_) }
sort readdir $dh;
closedir $dh;
} elsif ((-f $f or -p $f) and !is_format_patch_arg($f)) {
push @files, $f;
} else {
push @rev_list_opts, $f;
}
}
if (@rev_list_opts) {
die __("Cannot run git format-patch from outside a repository\n")
unless $repo;
require File::Temp;
push @files, $repo->command('format-patch', '-o', File::Temp::tempdir(CLEANUP => 1),
defined $reroll_count ? ('-v', $reroll_count) : (),
@rev_list_opts);
}
if (defined $sender) {
$sender =~ s/^\s+|\s+$//g;
($sender) = expand_aliases($sender);
} else {
$sender = $repoauthor->() || $repocommitter->() || '';
}
# $sender could be an already sanitized address
# (e.g. sendemail.from could be manually sanitized by user).
# But it's a no-op to run sanitize_address on an already sanitized address.
$sender = sanitize_address($sender);
$time = time - scalar $#files;
@files = handle_backup_files(@files);
if (@files) {
unless ($quiet) {
print $_,"\n" for (@files);
}
} else {
print STDERR __("\nNo patch files specified!\n\n");
usage();
}
sub get_patch_subject {
my $fn = shift;
open (my $fh, '<', $fn);
while (my $line = <$fh>) {
next unless ($line =~ /^Subject: (.*)$/);
close $fh;
return "GIT: $1\n";
}
close $fh;
die sprintf(__("No subject line in %s?"), $fn);
}
if ($compose) {
# Note that this does not need to be secure, but we will make a small
# effort to have it be unique
require File::Temp;
$compose_filename = ($repo ?
File::Temp::tempfile(".gitsendemail.msg.XXXXXX", DIR => $repo->repo_path()) :
File::Temp::tempfile(".gitsendemail.msg.XXXXXX", DIR => "."))[1];
open my $c, ">", $compose_filename
or die sprintf(__("Failed to open for writing %s: %s"), $compose_filename, $!);
my $tpl_sender = $sender || $repoauthor->() || $repocommitter->() || '';
my $tpl_subject = $initial_subject || '';
my $tpl_in_reply_to = $initial_in_reply_to || '';
my $tpl_reply_to = $reply_to || '';
my $tpl_to = join(',', @initial_to);
my $tpl_cc = join(',', @initial_cc);
my $tpl_bcc = join(', ', @initial_bcc);
print $c <<EOT1, Git::prefix_lines("GIT: ", __(<<EOT2)), <<EOT3;
From $tpl_sender # This line is ignored.
EOT1
Lines beginning in "GIT:" will be removed.
Consider including an overall diffstat or table of contents
for the patch you are writing.
Clear the body content if you don't wish to send a summary.
EOT2
From: $tpl_sender
To: $tpl_to
Cc: $tpl_cc
Bcc: $tpl_bcc
Reply-To: $tpl_reply_to
Subject: $tpl_subject
In-Reply-To: $tpl_in_reply_to
EOT3
for my $f (@files) {
print $c get_patch_subject($f);
}
close $c;
if ($annotate) {
do_edit($compose_filename, @files);
} else {
do_edit($compose_filename);
}
open my $c2, ">", $compose_filename . ".final"
or die sprintf(__("Failed to open %s.final: %s"), $compose_filename, $!);
open $c, "<", $compose_filename
or die sprintf(__("Failed to open %s: %s"), $compose_filename, $!);
my $need_8bit_cte = file_has_nonascii($compose_filename);
my $in_body = 0;
my $summary_empty = 1;
if (!defined $compose_encoding) {
$compose_encoding = "UTF-8";
}
while(<$c>) {
next if m/^GIT:/;
if ($in_body) {
$summary_empty = 0 unless (/^\n$/);
} elsif (/^\n$/) {
$in_body = 1;
if ($need_8bit_cte) {
print $c2 "MIME-Version: 1.0\n",
"Content-Type: text/plain; ",
"charset=$compose_encoding\n",
"Content-Transfer-Encoding: 8bit\n";
}
} elsif (/^MIME-Version:/i) {
$need_8bit_cte = 0;
} elsif (/^Subject:\s*(.+)\s*$/i) {
$initial_subject = $1;
my $subject = $initial_subject;
$_ = "Subject: " .
quote_subject($subject, $compose_encoding) .
"\n";
} elsif (/^In-Reply-To:\s*(.+)\s*$/i) {
$initial_in_reply_to = $1;
next;
} elsif (/^Reply-To:\s*(.+)\s*$/i) {
$reply_to = $1;
} elsif (/^From:\s*(.+)\s*$/i) {
$sender = $1;
next;
} elsif (/^To:\s*(.+)\s*$/i) {
@initial_to = parse_address_line($1);
next;
} elsif (/^Cc:\s*(.+)\s*$/i) {
@initial_cc = parse_address_line($1);
next;
} elsif (/^Bcc:/i) {
@initial_bcc = parse_address_line($1);
next;
}
print $c2 $_;
}
close $c;
close $c2;
if ($summary_empty) {
print __("Summary email is empty, skipping it\n");
$compose = -1;
}
} elsif ($annotate) {
do_edit(@files);
}
{
# Only instantiate one $term per program run, since some
# Term::ReadLine providers refuse to create a second instance.
my $term;
sub term {
require Term::ReadLine;
if (!defined $term) {
$term = $ENV{"GIT_SEND_EMAIL_NOTTY"}
? Term::ReadLine->new('git-send-email', \*STDIN, \*STDOUT)
: Term::ReadLine->new('git-send-email');
}
return $term;
}
}
sub ask {
my ($prompt, %arg) = @_;
my $valid_re = $arg{valid_re};
my $default = $arg{default};
my $confirm_only = $arg{confirm_only};
my $resp;
my $i = 0;
my $term = term();
return defined $default ? $default : undef
unless defined $term->IN and defined fileno($term->IN) and
defined $term->OUT and defined fileno($term->OUT);
while ($i++ < 10) {
$resp = $term->readline($prompt);
if (!defined $resp) { # EOF
print "\n";
return defined $default ? $default : undef;
}
if ($resp eq '' and defined $default) {
return $default;
}
if (!defined $valid_re or $resp =~ /$valid_re/) {
return $resp;
}
if ($confirm_only) {
my $yesno = $term->readline(
# TRANSLATORS: please keep [y/N] as is.
sprintf(__("Are you sure you want to use <%s> [y/N]? "), $resp));
if (defined $yesno && $yesno =~ /y/i) {
return $resp;
}
}
}
return;
}
my %broken_encoding;
sub file_declares_8bit_cte {
my $fn = shift;
open (my $fh, '<', $fn);
while (my $line = <$fh>) {
last if ($line =~ /^$/);
return 1 if ($line =~ /^Content-Transfer-Encoding: .*8bit.*$/);
}
close $fh;
return 0;
}
foreach my $f (@files) {
next unless (body_or_subject_has_nonascii($f)
&& !file_declares_8bit_cte($f));
$broken_encoding{$f} = 1;
}
if (!defined $auto_8bit_encoding && scalar %broken_encoding) {
print __("The following files are 8bit, but do not declare " .
"a Content-Transfer-Encoding.\n");
foreach my $f (sort keys %broken_encoding) {
print " $f\n";
}
$auto_8bit_encoding = ask(__("Which 8bit encoding should I declare [UTF-8]? "),
valid_re => qr/.{4}/, confirm_only => 1,
default => "UTF-8");
}
if (!$force) {
for my $f (@files) {
if (get_patch_subject($f) =~ /\Q*** SUBJECT HERE ***\E/) {
die sprintf(__("Refusing to send because the patch\n\t%s\n"
. "has the template subject '*** SUBJECT HERE ***'. "
. "Pass --force if you really want to send.\n"), $f);
}
}
}
my $to_whom = __("To whom should the emails be sent (if anyone)?");
my $prompting = 0;
if (!@initial_to && !defined $to_cmd) {
my $to = ask("$to_whom ",
default => "",
valid_re => qr/\@.*\./, confirm_only => 1);
push @initial_to, parse_address_line($to) if defined $to; # sanitized/validated later
$prompting++;
}
sub expand_aliases {
return map { expand_one_alias($_) } @_;
}
my %EXPANDED_ALIASES;
sub expand_one_alias {
my $alias = shift;
if ($EXPANDED_ALIASES{$alias}) {
die sprintf(__("fatal: alias '%s' expands to itself\n"), $alias);
}
local $EXPANDED_ALIASES{$alias} = 1;
return $aliases{$alias} ? expand_aliases(@{$aliases{$alias}}) : $alias;
}
@initial_to = process_address_list(@initial_to);
@initial_cc = process_address_list(@initial_cc);
@initial_bcc = process_address_list(@initial_bcc);
if ($thread && !defined $initial_in_reply_to && $prompting) {
$initial_in_reply_to = ask(
__("Message-ID to be used as In-Reply-To for the first email (if any)? "),
default => "",
valid_re => qr/\@.*\./, confirm_only => 1);
}
if (defined $initial_in_reply_to) {
$initial_in_reply_to =~ s/^\s*<?//;
$initial_in_reply_to =~ s/>?\s*$//;
$initial_in_reply_to = "<$initial_in_reply_to>" if $initial_in_reply_to ne '';
}
if (defined $reply_to) {
$reply_to =~ s/^\s+|\s+$//g;
($reply_to) = expand_aliases($reply_to);
$reply_to = sanitize_address($reply_to);
}
if (!defined $sendmail_cmd && !defined $smtp_server) {
my @sendmail_paths = qw( /usr/sbin/sendmail /usr/lib/sendmail );
push @sendmail_paths, map {"$_/sendmail"} split /:/, $ENV{PATH};
foreach (@sendmail_paths) {
if (-x $_) {
$sendmail_cmd = $_;
last;
}
}
if (!defined $sendmail_cmd) {
$smtp_server = 'localhost'; # could be 127.0.0.1, too... *shrug*
}
}
if ($compose && $compose > 0) {
@files = ($compose_filename . ".final", @files);
}
# Variables we set as part of the loop over files
our ($message_id, %mail, $subject, $in_reply_to, $references, $message,
$needs_confirm, $message_num, $ask_default);
sub extract_valid_address {
my $address = shift;
my $local_part_regexp = qr/[^<>"\s@]+/;
my $domain_regexp = qr/[^.<>"\s@]+(?:\.[^.<>"\s@]+)+/;
# check for a local address:
return $address if ($address =~ /^($local_part_regexp)$/);
$address =~ s/^\s*<(.*)>\s*$/$1/;
my $have_email_valid = eval { require Email::Valid; 1 };
if ($have_email_valid) {
return scalar Email::Valid->address($address);
}
# less robust/correct than the monster regexp in Email::Valid,
# but still does a 99% job, and one less dependency
return $1 if $address =~ /($local_part_regexp\@$domain_regexp)/;
return;
}
sub extract_valid_address_or_die {
my $address = shift;
my $valid_address = extract_valid_address($address);
die sprintf(__("error: unable to extract a valid address from: %s\n"), $address)
if !$valid_address;
return $valid_address;
}
sub validate_address {
my $address = shift;
while (!extract_valid_address($address)) {
printf STDERR __("error: unable to extract a valid address from: %s\n"), $address;
# TRANSLATORS: Make sure to include [q] [d] [e] in your
# translation. The program will only accept English input
# at this point.
$_ = ask(__("What to do with this address? ([q]uit|[d]rop|[e]dit): "),
valid_re => qr/^(?:quit|q|drop|d|edit|e)/i,
default => 'q');
if (/^d/i) {
return undef;
} elsif (/^q/i) {
cleanup_compose_files();
exit(0);
}
$address = ask("$to_whom ",
default => "",
valid_re => qr/\@.*\./, confirm_only => 1);
}
return $address;
}
sub validate_address_list {
return (grep { defined $_ }
map { validate_address($_) } @_);
}
# Usually don't need to change anything below here.
# we make a "fake" message id by taking the current number
# of seconds since the beginning of Unix time and tacking on
# a random number to the end, in case we are called quicker than
# 1 second since the last time we were called.
# We'll setup a template for the message id, using the "from" address:
my ($message_id_stamp, $message_id_serial);
sub make_message_id {
my $uniq;
if (!defined $message_id_stamp) {
require POSIX;
$message_id_stamp = POSIX::strftime("%Y%m%d%H%M%S.$$", gmtime(time));
$message_id_serial = 0;
}
$message_id_serial++;
$uniq = "$message_id_stamp-$message_id_serial";
my $du_part;
for ($sender, $repocommitter->(), $repoauthor->()) {
$du_part = extract_valid_address(sanitize_address($_));
last if (defined $du_part and $du_part ne '');
}
if (not defined $du_part or $du_part eq '') {
require Sys::Hostname;
$du_part = 'user@' . Sys::Hostname::hostname();
}
my $message_id_template = "<%s-%s>";
$message_id = sprintf($message_id_template, $uniq, $du_part);
#print "new message id = $message_id\n"; # Was useful for debugging
}
sub unquote_rfc2047 {
local ($_) = @_;
my $charset;
my $sep = qr/[ \t]+/;
s{$re_encoded_word(?:$sep$re_encoded_word)*}{
my @words = split $sep, $&;
foreach (@words) {
m/$re_encoded_word/;
$charset = $1;
my $encoding = $2;
my $text = $3;
if ($encoding eq 'q' || $encoding eq 'Q') {
$_ = $text;
s/_/ /g;
s/=([0-9A-F]{2})/chr(hex($1))/egi;
} else {
# other encodings not supported yet
}
}
join '', @words;
}eg;
return wantarray ? ($_, $charset) : $_;
}
sub quote_rfc2047 {
local $_ = shift;
my $encoding = shift || 'UTF-8';
s/([^-a-zA-Z0-9!*+\/])/sprintf("=%02X", ord($1))/eg;
s/(.*)/=\?$encoding\?q\?$1\?=/;
return $_;
}
sub is_rfc2047_quoted {
my $s = shift;
length($s) <= 75 &&
$s =~ m/^(?:"[[:ascii:]]*"|$re_encoded_word)$/o;
}
sub subject_needs_rfc2047_quoting {
my $s = shift;
return ($s =~ /[^[:ascii:]]/) || ($s =~ /=\?/);
}
sub quote_subject {
local $subject = shift;
my $encoding = shift || 'UTF-8';
if (subject_needs_rfc2047_quoting($subject)) {
return quote_rfc2047($subject, $encoding);
}
return $subject;
}
# use the simplest quoting being able to handle the recipient
sub sanitize_address {
my ($recipient) = @_;
# remove garbage after email address
$recipient =~ s/(.*>).*$/$1/;
my ($recipient_name, $recipient_addr) = ($recipient =~ /^(.*?)\s*(<.*)/);
if (not $recipient_name) {
return $recipient;
}
# if recipient_name is already quoted, do nothing
if (is_rfc2047_quoted($recipient_name)) {
return $recipient;
}
# remove non-escaped quotes
$recipient_name =~ s/(^|[^\\])"/$1/g;
# rfc2047 is needed if a non-ascii char is included
if ($recipient_name =~ /[^[:ascii:]]/) {
$recipient_name = quote_rfc2047($recipient_name);
}
# double quotes are needed if specials or CTLs are included
elsif ($recipient_name =~ /[][()<>@,;:\\".\000-\037\177]/) {
$recipient_name =~ s/([\\\r])/\\$1/g;
$recipient_name = qq["$recipient_name"];
}
return "$recipient_name $recipient_addr";
}
sub strip_garbage_one_address {
my ($addr) = @_;
chomp $addr;
if ($addr =~ /^(("[^"]*"|[^"<]*)? *<[^>]*>).*/) {
# "Foo Bar" <foobar@example.com> [possibly garbage here]
# Foo Bar <foobar@example.com> [possibly garbage here]
return $1;
}
if ($addr =~ /^(<[^>]*>).*/) {
# <foo@example.com> [possibly garbage here]
# if garbage contains other addresses, they are ignored.
return $1;
}
if ($addr =~ /^([^"#,\s]*)/) {
# address without quoting: remove anything after the address
return $1;
}
return $addr;
}
sub sanitize_address_list {
return (map { sanitize_address($_) } @_);
}
sub process_address_list {
my @addr_list = map { parse_address_line($_) } @_;
@addr_list = expand_aliases(@addr_list);
@addr_list = sanitize_address_list(@addr_list);
@addr_list = validate_address_list(@addr_list);
return @addr_list;
}
# Returns the local Fully Qualified Domain Name (FQDN) if available.
#
# Tightly configured MTAa require that a caller sends a real DNS
# domain name that corresponds the IP address in the HELO/EHLO
# handshake. This is used to verify the connection and prevent
# spammers from trying to hide their identity. If the DNS and IP don't
# match, the receiving MTA may deny the connection.
#
# Here is a deny example of Net::SMTP with the default "localhost.localdomain"
#
# Net::SMTP=GLOB(0x267ec28)>>> EHLO localhost.localdomain
# Net::SMTP=GLOB(0x267ec28)<<< 550 EHLO argument does not match calling host
#
# This maildomain*() code is based on ideas in Perl library Test::Reporter
# /usr/share/perl5/Test/Reporter/Mail/Util.pm ==> sub _maildomain ()
sub valid_fqdn {
my $domain = shift;
return defined $domain && !($^O eq 'darwin' && $domain =~ /\.local$/) && $domain =~ /\./;
}
sub maildomain_net {
my $maildomain;
require Net::Domain;
my $domain = Net::Domain::domainname();
$maildomain = $domain if valid_fqdn($domain);
return $maildomain;
}
sub maildomain_mta {
my $maildomain;
for my $host (qw(mailhost localhost)) {
require Net::SMTP;
my $smtp = Net::SMTP->new($host);
if (defined $smtp) {
my $domain = $smtp->domain;
$smtp->quit;
$maildomain = $domain if valid_fqdn($domain);
last if $maildomain;
}
}
return $maildomain;
}
sub maildomain {
return maildomain_net() || maildomain_mta() || 'localhost.localdomain';
}
sub smtp_host_string {
if (defined $smtp_server_port) {
return "$smtp_server:$smtp_server_port";
} else {
return $smtp_server;
}
}
# Returns 1 if authentication succeeded or was not necessary
# (smtp_user was not specified), and 0 otherwise.
sub smtp_auth_maybe {
if (!defined $smtp_authuser || $auth || (defined $smtp_auth && $smtp_auth eq "none")) {
return 1;
}
# Workaround AUTH PLAIN/LOGIN interaction defect
# with Authen::SASL::Cyrus
eval {
require Authen::SASL;
Authen::SASL->import(qw(Perl));
};
# Check mechanism naming as defined in:
# https://tools.ietf.org/html/rfc4422#page-8
if ($smtp_auth && $smtp_auth !~ /^(\b[A-Z0-9-_]{1,20}\s*)*$/) {
die "invalid smtp auth: '${smtp_auth}'";
}
# TODO: Authentication may fail not because credentials were
# invalid but due to other reasons, in which we should not
# reject credentials.
$auth = Git::credential({
'protocol' => 'smtp',
'host' => smtp_host_string(),
'username' => $smtp_authuser,
# if there's no password, "git credential fill" will
# give us one, otherwise it'll just pass this one.
'password' => $smtp_authpass
}, sub {
my $cred = shift;
if ($smtp_auth) {
my $sasl = Authen::SASL->new(
mechanism => $smtp_auth,
callback => {
user => $cred->{'username'},
pass => $cred->{'password'},
authname => $cred->{'username'},
}
);
return !!$smtp->auth($sasl);
}
return !!$smtp->auth($cred->{'username'}, $cred->{'password'});
});
return $auth;
}
sub ssl_verify_params {
eval {
require IO::Socket::SSL;
IO::Socket::SSL->import(qw/SSL_VERIFY_PEER SSL_VERIFY_NONE/);
};
if ($@) {
print STDERR "Not using SSL_VERIFY_PEER due to out-of-date IO::Socket::SSL.\n";
return;
}
if (!defined $smtp_ssl_cert_path) {
# use the OpenSSL defaults
return (SSL_verify_mode => SSL_VERIFY_PEER());
}
if ($smtp_ssl_cert_path eq "") {
return (SSL_verify_mode => SSL_VERIFY_NONE());
} elsif (-d $smtp_ssl_cert_path) {
return (SSL_verify_mode => SSL_VERIFY_PEER(),
SSL_ca_path => $smtp_ssl_cert_path);
} elsif (-f $smtp_ssl_cert_path) {
return (SSL_verify_mode => SSL_VERIFY_PEER(),
SSL_ca_file => $smtp_ssl_cert_path);
} else {
die sprintf(__("CA path \"%s\" does not exist"), $smtp_ssl_cert_path);
}
}
sub file_name_is_absolute {
my ($path) = @_;
# msys does not grok DOS drive-prefixes
if ($^O eq 'msys') {
return ($path =~ m#^/# || $path =~ m#^[a-zA-Z]\:#)
}
require File::Spec::Functions;
return File::Spec::Functions::file_name_is_absolute($path);
}
sub gen_header {
my @recipients = unique_email_list(@to);
@cc = (grep { my $cc = extract_valid_address_or_die($_);
not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients
}
@cc);
my $to = join (",\n\t", @recipients);
@recipients = unique_email_list(@recipients,@cc,@initial_bcc);
@recipients = (map { extract_valid_address_or_die($_) } @recipients);
my $date = format_2822_time($time++);
my $gitversion = '@@GIT_VERSION@@';
if ($gitversion =~ m/..GIT_VERSION../) {
$gitversion = Git::version();
}
my $cc = join(",\n\t", unique_email_list(@cc));
my $ccline = "";
if ($cc ne '') {
$ccline = "\nCc: $cc";
}
make_message_id() unless defined($message_id);
my $header = "From: $sender
To: $to${ccline}
Subject: $subject
Date: $date
Message-ID: $message_id
";
if ($use_xmailer) {
$header .= "X-Mailer: git-send-email $gitversion\n";
}
if ($in_reply_to) {
$header .= "In-Reply-To: $in_reply_to\n";
$header .= "References: $references\n";
}
if ($reply_to) {
$header .= "Reply-To: $reply_to\n";
}
if (@xh) {
$header .= join("\n", @xh) . "\n";
}
my $recipients_ref = \@recipients;
return ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header);
}
# Prepares the email, then asks the user what to do.
#
# If the user chooses to send the email, it's sent and 1 is returned.
# If the user chooses not to send the email, 0 is returned.
# If the user decides they want to make further edits, -1 is returned and the
# caller is expected to call send_message again after the edits are performed.
#
# If an error occurs sending the email, this just dies.
sub send_message {
my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header();
my @recipients = @$recipients_ref;
my @sendmail_parameters = ('-i', @recipients);
my $raw_from = $sender;
if (defined $envelope_sender && $envelope_sender ne "auto") {
$raw_from = $envelope_sender;
}
$raw_from = extract_valid_address($raw_from);
unshift (@sendmail_parameters,
'-f', $raw_from) if(defined $envelope_sender);
if ($needs_confirm && !$dry_run) {
print "\n$header\n";
if ($needs_confirm eq "inform") {
$confirm_unconfigured = 0; # squelch this message for the rest of this run
$ask_default = "y"; # assume yes on EOF since user hasn't explicitly asked for confirmation
print __ <<EOF ;
The Cc list above has been expanded by additional
addresses found in the patch commit message. By default
send-email prompts before sending whenever this occurs.
This behavior is controlled by the sendemail.confirm
configuration setting.
For additional information, run 'git send-email --help'.
To retain the current behavior, but squelch this message,
run 'git config --global sendemail.confirm auto'.
EOF
}
# TRANSLATORS: Make sure to include [y] [n] [e] [q] [a] in your
# translation. The program will only accept English input
# at this point.
$_ = ask(__("Send this email? ([y]es|[n]o|[e]dit|[q]uit|[a]ll): "),
valid_re => qr/^(?:yes|y|no|n|edit|e|quit|q|all|a)/i,
default => $ask_default);
die __("Send this email reply required") unless defined $_;
if (/^n/i) {
return 0;
} elsif (/^e/i) {
return -1;
} elsif (/^q/i) {
cleanup_compose_files();
exit(0);
} elsif (/^a/i) {
$confirm = 'never';
}
}
unshift (@sendmail_parameters, @smtp_server_options);
if ($dry_run) {
# We don't want to send the email.
} elsif (defined $sendmail_cmd || file_name_is_absolute($smtp_server)) {
my $pid = open my $sm, '|-';
defined $pid or die $!;
if (!$pid) {
if (defined $sendmail_cmd) {
exec ("sh", "-c", "$sendmail_cmd \"\$@\"", "-", @sendmail_parameters)
or die $!;
} else {
exec ($smtp_server, @sendmail_parameters)
or die $!;
}
}
print $sm "$header\n$message";
close $sm or die $!;
} else {
if (!defined $smtp_server) {
die __("The required SMTP server is not properly defined.")
}
require Net::SMTP;
my $use_net_smtp_ssl = version->parse($Net::SMTP::VERSION) < version->parse("2.34");
$smtp_domain ||= maildomain();
if ($smtp_encryption eq 'ssl') {
$smtp_server_port ||= 465; # ssmtp
require IO::Socket::SSL;
# Suppress "variable accessed once" warning.
{
no warnings 'once';
$IO::Socket::SSL::DEBUG = 1;
}
# Net::SMTP::SSL->new() does not forward any SSL options
IO::Socket::SSL::set_client_defaults(
ssl_verify_params());
if ($use_net_smtp_ssl) {
require Net::SMTP::SSL;
$smtp ||= Net::SMTP::SSL->new($smtp_server,
Hello => $smtp_domain,
Port => $smtp_server_port,
Debug => $debug_net_smtp);
}
else {
$smtp ||= Net::SMTP->new($smtp_server,
Hello => $smtp_domain,
Port => $smtp_server_port,
Debug => $debug_net_smtp,
SSL => 1);
}
}
elsif (!$smtp) {
$smtp_server_port ||= 25;
$smtp ||= Net::SMTP->new($smtp_server,
Hello => $smtp_domain,
Debug => $debug_net_smtp,
Port => $smtp_server_port);
if ($smtp_encryption eq 'tls' && $smtp) {
if ($use_net_smtp_ssl) {
$smtp->command('STARTTLS');
$smtp->response();
if ($smtp->code != 220) {
die sprintf(__("Server does not support STARTTLS! %s"), $smtp->message);
}
require Net::SMTP::SSL;
$smtp = Net::SMTP::SSL->start_SSL($smtp,
ssl_verify_params())
or die sprintf(__("STARTTLS failed! %s"), IO::Socket::SSL::errstr());
}
else {
$smtp->starttls(ssl_verify_params())
or die sprintf(__("STARTTLS failed! %s"), IO::Socket::SSL::errstr());
}
# Send EHLO again to receive fresh
# supported commands
$smtp->hello($smtp_domain);
}
}
if (!$smtp) {
die __("Unable to initialize SMTP properly. Check config and use --smtp-debug."),
" VALUES: server=$smtp_server ",
"encryption=$smtp_encryption ",
"hello=$smtp_domain",
defined $smtp_server_port ? " port=$smtp_server_port" : "";
}
smtp_auth_maybe or die $smtp->message;
$smtp->mail( $raw_from ) or die $smtp->message;
$smtp->to( @recipients ) or die $smtp->message;
$smtp->data or die $smtp->message;
$smtp->datasend("$header\n") or die $smtp->message;
my @lines = split /^/, $message;
foreach my $line (@lines) {
$smtp->datasend("$line") or die $smtp->message;
}
$smtp->dataend() or die $smtp->message;
$smtp->code =~ /250|200/ or die sprintf(__("Failed to send %s\n"), $subject).$smtp->message;
}
if ($quiet) {
printf($dry_run ? __("Dry-Sent %s") : __("Sent %s"), $subject);
print "\n";
} else {
print($dry_run ? __("Dry-OK. Log says:") : __("OK. Log says:"));
print "\n";
if (!defined $sendmail_cmd && !file_name_is_absolute($smtp_server)) {
print "Server: $smtp_server\n";
print "MAIL FROM:<$raw_from>\n";
foreach my $entry (@recipients) {
print "RCPT TO:<$entry>\n";
}
} else {
my $sm;
if (defined $sendmail_cmd) {
$sm = $sendmail_cmd;
} else {
$sm = $smtp_server;
}
print "Sendmail: $sm ".join(' ',@sendmail_parameters)."\n";
}
print $header, "\n";
if ($smtp) {
print __("Result: "), $smtp->code, ' ',
($smtp->message =~ /\n([^\n]+\n)$/s);
} else {
print __("Result: OK");
}
print "\n";
}
return 1;
}
sub pre_process_file {
my ($t, $quiet) = @_;
open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t);
my $author = undef;
my $sauthor = undef;
my $author_encoding;
my $has_content_type;
my $body_encoding;
my $xfer_encoding;
my $has_mime_version;
@to = ();
@cc = ();
@xh = ();
my $input_format = undef;
my @header = ();
$subject = $initial_subject;
$message = "";
$message_num++;
undef $message_id;
# Retrieve and unfold header fields.
my @header_lines = ();
while(<$fh>) {
last if /^\s*$/;
push(@header_lines, $_);
}
@header = unfold_headers(@header_lines);
# Add computed headers, if applicable.
unless ($no_header_cmd || ! $header_cmd) {
push @header, invoke_header_cmd($header_cmd, $t);
}
# Now parse the header
foreach(@header) {
if (/^From /) {
$input_format = 'mbox';
next;
}
chomp;
if (!defined $input_format && /^[-A-Za-z]+:\s/) {
$input_format = 'mbox';
}
if (defined $input_format && $input_format eq 'mbox') {
if (/^Subject:\s+(.*)$/i) {
$subject = $1;
}
elsif (/^From:\s+(.*)$/i) {
($author, $author_encoding) = unquote_rfc2047($1);
$sauthor = sanitize_address($author);
next if $suppress_cc{'author'};
next if $suppress_cc{'self'} and $sauthor eq $sender;
printf(__("(mbox) Adding cc: %s from line '%s'\n"),
$1, $_) unless $quiet;
push @cc, $1;
}
elsif (/^To:\s+(.*)$/i) {
foreach my $addr (parse_address_line($1)) {
printf(__("(mbox) Adding to: %s from line '%s'\n"),
$addr, $_) unless $quiet;
push @to, $addr;
}
}
elsif (/^Cc:\s+(.*)$/i) {
foreach my $addr (parse_address_line($1)) {
my $qaddr = unquote_rfc2047($addr);
my $saddr = sanitize_address($qaddr);
if ($saddr eq $sender) {
next if ($suppress_cc{'self'});
} else {
next if ($suppress_cc{'cc'});
}
printf(__("(mbox) Adding cc: %s from line '%s'\n"),
$addr, $_) unless $quiet;
push @cc, $addr;
}
}
elsif (/^Content-type:/i) {
$has_content_type = 1;
if (/charset="?([^ "]+)/) {
$body_encoding = $1;
}
push @xh, $_;
}
elsif (/^MIME-Version/i) {
$has_mime_version = 1;
push @xh, $_;
}
elsif (/^Message-ID: (.*)/i) {
$message_id = $1;
}
elsif (/^Content-Transfer-Encoding: (.*)/i) {
$xfer_encoding = $1 if not defined $xfer_encoding;
}
elsif (/^In-Reply-To: (.*)/i) {
if (!$initial_in_reply_to || $thread) {
$in_reply_to = $1;
}
}
elsif (/^References: (.*)/i) {
if (!$initial_in_reply_to || $thread) {
$references = $1;
}
}
elsif (!/^Date:\s/i && /^[-A-Za-z]+:\s+\S/) {
push @xh, $_;
}
} else {
# In the traditional
# "send lots of email" format,
# line 1 = cc
# line 2 = subject
# So let's support that, too.
$input_format = 'lots';
if (@cc == 0 && !$suppress_cc{'cc'}) {
printf(__("(non-mbox) Adding cc: %s from line '%s'\n"),
$_, $_) unless $quiet;
push @cc, $_;
} elsif (!defined $subject) {
$subject = $_;
}
}
}
# Now parse the message body
while(<$fh>) {
$message .= $_;
if (/^([a-z][a-z-]*-by|Cc): (.*)/i) {
chomp;
my ($what, $c) = ($1, $2);
# strip garbage for the address we'll use:
$c = strip_garbage_one_address($c);
# sanitize a bit more to decide whether to suppress the address:
my $sc = sanitize_address($c);
if ($sc eq $sender) {
next if ($suppress_cc{'self'});
} else {
if ($what =~ /^Signed-off-by$/i) {
next if $suppress_cc{'sob'};
} elsif ($what =~ /-by$/i) {
next if $suppress_cc{'misc-by'};
} elsif ($what =~ /Cc/i) {
next if $suppress_cc{'bodycc'};
}
}
if ($c !~ /.+@.+|<.+>/) {
printf("(body) Ignoring %s from line '%s'\n",
$what, $_) unless $quiet;
next;
}
push @cc, $c;
printf(__("(body) Adding cc: %s from line '%s'\n"),
$c, $_) unless $quiet;
}
}
close $fh;
push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t, $quiet)
if defined $to_cmd;
push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t, $quiet)
if defined $cc_cmd && !$suppress_cc{'cccmd'};
if ($broken_encoding{$t} && !$has_content_type) {
$xfer_encoding = '8bit' if not defined $xfer_encoding;
$has_content_type = 1;
push @xh, "Content-Type: text/plain; charset=$auto_8bit_encoding";
$body_encoding = $auto_8bit_encoding;
}
if ($broken_encoding{$t} && !is_rfc2047_quoted($subject)) {
$subject = quote_subject($subject, $auto_8bit_encoding);
}
if (defined $sauthor and $sauthor ne $sender) {
$message = "From: $author\n\n$message";
if (defined $author_encoding) {
if ($has_content_type) {
if ($body_encoding eq $author_encoding) {
# ok, we already have the right encoding
}
else {
# uh oh, we should re-encode
}
}
else {
$xfer_encoding = '8bit' if not defined $xfer_encoding;
$has_content_type = 1;
push @xh,
"Content-Type: text/plain; charset=$author_encoding";
}
}
}
$xfer_encoding = '8bit' if not defined $xfer_encoding;
($message, $xfer_encoding) = apply_transfer_encoding(
$message, $xfer_encoding, $target_xfer_encoding);
push @xh, "Content-Transfer-Encoding: $xfer_encoding";
unshift @xh, 'MIME-Version: 1.0' unless $has_mime_version;
$needs_confirm = (
$confirm eq "always" or
($confirm =~ /^(?:auto|cc)$/ && @cc) or
($confirm =~ /^(?:auto|compose)$/ && $compose && $message_num == 1));
$needs_confirm = "inform" if ($needs_confirm && $confirm_unconfigured && @cc);
@to = process_address_list(@to);
@cc = process_address_list(@cc);
@to = (@initial_to, @to);
@cc = (@initial_cc, @cc);
if ($message_num == 1) {
if (defined $cover_cc and $cover_cc) {
@initial_cc = @cc;
}
if (defined $cover_to and $cover_to) {
@initial_to = @to;
}
}
}
# Prepares the email, prompts the user, and sends it out
# Returns 0 if an edit was done and the function should be called again, or 1
# on the email being successfully sent out.
sub process_file {
my ($t) = @_;
pre_process_file($t, $quiet);
my $message_was_sent = send_message();
if ($message_was_sent == -1) {
do_edit($t);
return 0;
}
# set up for the next message
if ($thread) {
if ($message_was_sent &&
($chain_reply_to || !defined $in_reply_to || length($in_reply_to) == 0 ||
$message_num == 1)) {
$in_reply_to = $message_id;
if (length $references > 0) {
$references .= "\n $message_id";
} else {
$references = "$message_id";
}
}
} elsif (!defined $initial_in_reply_to) {
# --thread and --in-reply-to manage the "In-Reply-To" header and by
# extension the "References" header. If these commands are not used, reset
# the header values to their defaults.
$in_reply_to = undef;
$references = '';
}
$message_id = undef;
$num_sent++;
if (defined $batch_size && $num_sent == $batch_size) {
$num_sent = 0;
$smtp->quit if defined $smtp;
undef $smtp;
undef $auth;
sleep($relogin_delay) if defined $relogin_delay;
}
return 1;
}
sub initialize_modified_loop_vars {
$in_reply_to = $initial_in_reply_to;
$references = $initial_in_reply_to || '';
$message_num = 0;
}
if ($validate) {
# FIFOs can only be read once, exclude them from validation.
my @real_files = ();
foreach my $f (@files) {
unless (-p $f) {
push(@real_files, $f);
}
}
# Run the loop once again to avoid gaps in the counter due to FIFO
# arguments provided by the user.
my $num = 1;
my $num_files = scalar @real_files;
$ENV{GIT_SENDEMAIL_FILE_TOTAL} = "$num_files";
initialize_modified_loop_vars();
foreach my $r (@real_files) {
$ENV{GIT_SENDEMAIL_FILE_COUNTER} = "$num";
pre_process_file($r, 1);
validate_patch($r, $target_xfer_encoding);
$num += 1;
}
delete $ENV{GIT_SENDEMAIL_FILE_COUNTER};
delete $ENV{GIT_SENDEMAIL_FILE_TOTAL};
}
initialize_modified_loop_vars();
foreach my $t (@files) {
while (!process_file($t)) {
# user edited the file
}
}
# Execute a command and return its output lines as an array. Blank
# lines which do not appear at the end of the output are reported as
# errors.
sub execute_cmd {
my ($prefix, $cmd, $file) = @_;
my @lines = ();
my $seen_blank_line = 0;
open my $fh, "-|", "$cmd \Q$file\E"
or die sprintf(__("(%s) Could not execute '%s'"), $prefix, $cmd);
while (my $line = <$fh>) {
die sprintf(__("(%s) Malformed output from '%s'"), $prefix, $cmd)
if $seen_blank_line;
if ($line =~ /^$/) {
$seen_blank_line = $line =~ /^$/;
next;
}
push @lines, $line;
}
close $fh
or die sprintf(__("(%s) failed to close pipe to '%s'"), $prefix, $cmd);
return @lines;
}
# Process headers lines, unfolding multiline headers as defined by RFC
# 2822.
sub unfold_headers {
my @headers;
foreach(@_) {
last if /^\s*$/;
if (/^\s+\S/ and @headers) {
chomp($headers[$#headers]);
s/^\s+/ /;
$headers[$#headers] .= $_;
} else {
push(@headers, $_);
}
}
return @headers;
}
# Invoke the provided CMD with FILE as an argument, which should
# output RFC 2822 email headers. Fold multiline headers and return the
# headers as an array.
sub invoke_header_cmd {
my ($cmd, $file) = @_;
my @lines = execute_cmd("header-cmd", $header_cmd, $file);
return unfold_headers(@lines);
}
# Execute a command (e.g. $to_cmd) to get a list of email addresses
# and return a results array
sub recipients_cmd {
my ($prefix, $what, $cmd, $file, $quiet) = @_;
my @lines = ();
my @addresses = ();
@lines = execute_cmd($prefix, $cmd, $file);
for my $address (@lines) {
$address =~ s/^\s*//g;
$address =~ s/\s*$//g;
$address = sanitize_address($address);
next if ($address eq $sender and $suppress_cc{'self'});
push @addresses, $address;
printf(__("(%s) Adding %s: %s from: '%s'\n"),
$prefix, $what, $address, $cmd) unless $quiet;
}
return @addresses;
}
cleanup_compose_files();
sub cleanup_compose_files {
unlink($compose_filename, $compose_filename . ".final") if $compose;
}
$smtp->quit if $smtp;
sub apply_transfer_encoding {
my $message = shift;
my $from = shift;
my $to = shift;
return ($message, $to) if ($from eq $to and $from ne '7bit');
require MIME::QuotedPrint;
require MIME::Base64;
$message = MIME::QuotedPrint::decode($message)
if ($from eq 'quoted-printable');
$message = MIME::Base64::decode($message)
if ($from eq 'base64');
$to = ($message =~ /(?:.{999,}|\r)/) ? 'quoted-printable' : '8bit'
if $to eq 'auto';
die __("cannot send message as 7bit")
if ($to eq '7bit' and $message =~ /[^[:ascii:]]/);
return ($message, $to)
if ($to eq '7bit' or $to eq '8bit');
return (MIME::QuotedPrint::encode($message, "\n", 0), $to)
if ($to eq 'quoted-printable');
return (MIME::Base64::encode($message, "\n"), $to)
if ($to eq 'base64');
die __("invalid transfer encoding");
}
sub unique_email_list {
my %seen;
my @emails;
foreach my $entry (@_) {
my $clean = extract_valid_address_or_die($entry);
$seen{$clean} ||= 0;
next if $seen{$clean}++;
push @emails, $entry;
}
return @emails;
}
sub validate_patch {
my ($fn, $xfer_encoding) = @_;
if ($repo) {
my $hook_name = 'sendemail-validate';
my $hooks_path = $repo->command_oneline('rev-parse', '--git-path', 'hooks');
require File::Spec;
my $validate_hook = File::Spec->catfile($hooks_path, $hook_name);
my $hook_error;
if (-x $validate_hook) {
require Cwd;
my $target = Cwd::abs_path($fn);
# The hook needs a correct cwd and GIT_DIR.
my $cwd_save = Cwd::getcwd();
chdir($repo->wc_path() or $repo->repo_path())
or die("chdir: $!");
local $ENV{"GIT_DIR"} = $repo->repo_path();
my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header();
require File::Temp;
my ($header_filehandle, $header_filename) = File::Temp::tempfile(
TEMPLATE => ".gitsendemail.header.XXXXXX",
DIR => $repo->repo_path(),
UNLINK => 1,
);
print $header_filehandle $header;
my @cmd = ("git", "hook", "run", "--ignore-missing",
$hook_name, "--");
my @cmd_msg = (@cmd, "<patch>", "<header>");
my @cmd_run = (@cmd, $target, $header_filename);
$hook_error = system_or_msg(\@cmd_run, undef, "@cmd_msg");
chdir($cwd_save) or die("chdir: $!");
}
if ($hook_error) {
$hook_error = sprintf(
__("fatal: %s: rejected by %s hook\n%s\nwarning: no patches were sent\n"),
$fn, $hook_name, $hook_error);
die $hook_error;
}
}
# Any long lines will be automatically fixed if we use a suitable transfer
# encoding.
unless ($xfer_encoding =~ /^(?:auto|quoted-printable|base64)$/) {
open(my $fh, '<', $fn)
or die sprintf(__("unable to open %s: %s\n"), $fn, $!);
while (my $line = <$fh>) {
if (length($line) > 998) {
die sprintf(__("fatal: %s:%d is longer than 998 characters\n" .
"warning: no patches were sent\n"), $fn, $.);
}
}
}
return;
}
sub handle_backup {
my ($last, $lastlen, $file, $known_suffix) = @_;
my ($suffix, $skip);
$skip = 0;
if (defined $last &&
($lastlen < length($file)) &&
(substr($file, 0, $lastlen) eq $last) &&
($suffix = substr($file, $lastlen)) !~ /^[a-z0-9]/i) {
if (defined $known_suffix && $suffix eq $known_suffix) {
printf(__("Skipping %s with backup suffix '%s'.\n"), $file, $known_suffix);
$skip = 1;
} else {
# TRANSLATORS: please keep "[y|N]" as is.
my $answer = ask(sprintf(__("Do you really want to send %s? [y|N]: "), $file),
valid_re => qr/^(?:y|n)/i,
default => 'n');
$skip = ($answer ne 'y');
if ($skip) {
$known_suffix = $suffix;
}
}
}
return ($skip, $known_suffix);
}
sub handle_backup_files {
my @file = @_;
my ($last, $lastlen, $known_suffix, $skip, @result);
for my $file (@file) {
($skip, $known_suffix) = handle_backup($last, $lastlen,
$file, $known_suffix);
push @result, $file unless $skip;
$last = $file;
$lastlen = length($file);
}
return @result;
}
sub file_has_nonascii {
my $fn = shift;
open(my $fh, '<', $fn)
or die sprintf(__("unable to open %s: %s\n"), $fn, $!);
while (my $line = <$fh>) {
return 1 if $line =~ /[^[:ascii:]]/;
}
return 0;
}
sub body_or_subject_has_nonascii {
my $fn = shift;
open(my $fh, '<', $fn)
or die sprintf(__("unable to open %s: %s\n"), $fn, $!);
while (my $line = <$fh>) {
last if $line =~ /^$/;
return 1 if $line =~ /^Subject.*[^[:ascii:]]/;
}
while (my $line = <$fh>) {
return 1 if $line =~ /[^[:ascii:]]/;
}
return 0;
}