| Core GIT Translations |
| ===================== |
| |
| This directory holds the translations for the core of Git. This document |
| describes how you can contribute to the effort of enhancing the language |
| coverage and maintaining the translation. |
| |
| The localization (l10n) coordinator, Jiang Xin <worldhello.net@gmail.com>, |
| coordinates our localization effort in the l10 coordinator repository: |
| |
| https://github.com/git-l10n/git-po/ |
| |
| The two character language translation codes are defined by ISO_639-1, as |
| stated in the gettext(1) full manual, appendix A.1, Usual Language Codes. |
| |
| |
| Contributing to an existing translation |
| --------------------------------------- |
| As a contributor for a language XX, you should first check TEAMS file in |
| this directory to see whether a dedicated repository for your language XX |
| exists. Fork the dedicated repository and start to work if it exists. |
| |
| Sometime, contributors may find that the translations of their Git |
| distributions are quite different with the translations of the |
| corresponding version from Git official. This is because some Git |
| distributions (such as from Ubuntu, etc.) have their own l10n workflow. |
| For this case, wrong translations should be reported and fixed through |
| their workflows. |
| |
| |
| Creating a new language translation |
| ----------------------------------- |
| If you are the first contributor for the language XX, please fork this |
| repository, prepare and/or update the translated message file po/XX.po |
| (described later), and ask the l10n coordinator to pull your work. |
| |
| If there are multiple contributors for the same language, please first |
| coordinate among yourselves and nominate the team leader for your |
| language, so that the l10n coordinator only needs to interact with one |
| person per language. |
| |
| |
| Translation Process Flow |
| ------------------------ |
| The overall data-flow looks like this: |
| |
| +-------------------+ +------------------+ |
| | Git source code | ---(1)---> | L10n coordinator | |
| | repository | <---(4)--- | repository | |
| +-------------------+ +------------------+ |
| | ^ |
| (2) (3) |
| V | |
| +------------------+ |
| | Language Team XX | |
| +------------------+ |
| |
| * Translatable strings are marked in the source file. |
| * L10n coordinator pulls from the source (1) |
| * L10n coordinator updates the message template po/git.pot |
| * Language team pulls from L10n coordinator (2) |
| * Language team updates the message file po/XX.po |
| * L10n coordinator pulls from Language team (3) |
| * L10n coordinator asks the result to be pulled (4). |
| |
| |
| Maintaining the po/git.pot file |
| ------------------------------- |
| |
| (This is done by the l10n coordinator). |
| |
| The po/git.pot file contains a message catalog extracted from Git's |
| sources. The l10n coordinator maintains it by adding new translations with |
| msginit(1), or update existing ones with msgmerge(1). In order to update |
| the Git sources to extract the messages from, the l10n coordinator is |
| expected to pull from the main git repository at strategic point in |
| history (e.g. when a major release and release candidates are tagged), |
| and then run "make pot" at the top-level directory. |
| |
| Language contributors use this file to prepare translations for their |
| language, but they are not expected to modify it. |
| |
| |
| Initializing a XX.po file |
| ------------------------- |
| |
| (This is done by the language teams). |
| |
| If your language XX does not have translated message file po/XX.po yet, |
| you add a translation for the first time by running: |
| |
| msginit --locale=XX |
| |
| in the po/ directory, where XX is the locale, e.g. "de", "is", "pt_BR", |
| "zh_CN", etc. |
| |
| Then edit the automatically generated copyright info in your new XX.po |
| to be correct, e.g. for Icelandic: |
| |
| @@ -1,6 +1,6 @@ |
| -# Icelandic translations for PACKAGE package. |
| -# Copyright (C) 2010 THE PACKAGE'S COPYRIGHT HOLDER |
| -# This file is distributed under the same license as the PACKAGE package. |
| +# Icelandic translations for Git. |
| +# Copyright (C) 2010 Ævar Arnfjörð Bjarmason <avarab@gmail.com> |
| +# This file is distributed under the same license as the Git package. |
| # Ævar Arnfjörð Bjarmason <avarab@gmail.com>, 2010. |
| |
| And change references to PACKAGE VERSION in the PO Header Entry to |
| just "Git": |
| |
| perl -pi -e 's/(?<="Project-Id-Version: )PACKAGE VERSION/Git/' XX.po |
| |
| Once you are done testing the translation (see below), commit the result |
| and ask the l10n coordinator to pull from you. |
| |
| |
| Updating a XX.po file |
| --------------------- |
| |
| (This is done by the language teams). |
| |
| If you are replacing translation strings in an existing XX.po file to |
| improve the translation, just edit the file. |
| |
| If there's an existing XX.po file for your language, but the repository |
| of the l10n coordinator has newer po/git.pot file, you would need to first |
| pull from the l10n coordinator (see the beginning of this document for its |
| URL), and then update the existing translation by running: |
| |
| msgmerge --add-location --backup=off -U XX.po git.pot |
| |
| in the po/ directory, where XX.po is the file you want to update. |
| |
| Once you are done testing the translation (see below), commit the result |
| and ask the l10n coordinator to pull from you. |
| |
| |
| Testing your changes |
| -------------------- |
| |
| (This is done by the language teams, after creating or updating XX.po file). |
| |
| Before you submit your changes go back to the top-level and do: |
| |
| make |
| |
| On systems with GNU gettext (i.e. not Solaris) this will compile your |
| changed PO file with `msgfmt --check`, the --check option flags many |
| common errors, e.g. missing printf format strings, or translated |
| messages that deviate from the originals in whether they begin/end |
| with a newline or not. |
| |
| |
| Marking strings for translation |
| ------------------------------- |
| |
| (This is done by the core developers). |
| |
| Before strings can be translated they first have to be marked for |
| translation. |
| |
| Git uses an internationalization interface that wraps the system's |
| gettext library, so most of the advice in your gettext documentation |
| (on GNU systems `info gettext` in a terminal) applies. |
| |
| General advice: |
| |
| - Don't mark everything for translation, only strings which will be |
| read by humans (the porcelain interface) should be translated. |
| |
| The output from Git's plumbing utilities will primarily be read by |
| programs and would break scripts under non-C locales if it was |
| translated. Plumbing strings should not be translated, since |
| they're part of Git's API. |
| |
| - Adjust the strings so that they're easy to translate. Most of the |
| advice in `info '(gettext)Preparing Strings'` applies here. |
| |
| - If something is unclear or ambiguous you can use a "TRANSLATORS" |
| comment to tell the translators what to make of it. These will be |
| extracted by xgettext(1) and put in the po/*.po files, e.g. from |
| git-am.sh: |
| |
| # TRANSLATORS: Make sure to include [y], [n], [e], [v] and [a] |
| # in your translation. The program will only accept English |
| # input at this point. |
| gettext "Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all " |
| |
| Or in C, from builtin/revert.c: |
| |
| /* TRANSLATORS: %s will be "revert" or "cherry-pick" */ |
| die(_("%s: Unable to write new index file"), action_name(opts)); |
| |
| We provide wrappers for C, Shell and Perl programs. Here's how they're |
| used: |
| |
| C: |
| |
| - Include builtin.h at the top, it'll pull in gettext.h, which |
| defines the gettext interface. Consult with the list if you need to |
| use gettext.h directly. |
| |
| - The C interface is a subset of the normal GNU gettext |
| interface. We currently export these functions: |
| |
| - _() |
| |
| Mark and translate a string. E.g.: |
| |
| printf(_("HEAD is now at %s"), hex); |
| |
| - Q_() |
| |
| Mark and translate a plural string. E.g.: |
| |
| printf(Q_("%d commit", "%d commits", number_of_commits)); |
| |
| This is just a wrapper for the ngettext() function. |
| |
| - N_() |
| |
| A no-op pass-through macro for marking strings inside static |
| initializations, e.g.: |
| |
| static const char *reset_type_names[] = { |
| N_("mixed"), N_("soft"), N_("hard"), N_("merge"), N_("keep"), NULL |
| }; |
| |
| And then, later: |
| |
| die(_("%s reset is not allowed in a bare repository"), |
| _(reset_type_names[reset_type])); |
| |
| Here _() couldn't have statically determined what the translation |
| string will be, but since it was already marked for translation |
| with N_() the look-up in the message catalog will succeed. |
| |
| Shell: |
| |
| - The Git gettext shell interface is just a wrapper for |
| gettext.sh. Import it right after git-sh-setup like this: |
| |
| . git-sh-setup |
| . git-sh-i18n |
| |
| And then use the gettext or eval_gettext functions: |
| |
| # For constant interface messages: |
| gettext "A message for the user"; echo |
| |
| # To interpolate variables: |
| details="oh noes" |
| eval_gettext "An error occurred: \$details"; echo |
| |
| In addition we have wrappers for messages that end with a trailing |
| newline. I.e. you could write the above as: |
| |
| # For constant interface messages: |
| gettextln "A message for the user" |
| |
| # To interpolate variables: |
| details="oh noes" |
| eval_gettextln "An error occurred: \$details" |
| |
| More documentation about the interface is available in the GNU info |
| page: `info '(gettext)sh'`. Looking at git-am.sh (the first shell |
| command to be translated) for examples is also useful: |
| |
| git log --reverse -p --grep=i18n git-am.sh |
| |
| Perl: |
| |
| - The Git::I18N module provides a limited subset of the |
| Locale::Messages functionality, e.g.: |
| |
| use Git::I18N; |
| print __("Welcome to Git!\n"); |
| printf __("The following error occurred: %s\n"), $error; |
| |
| Run `perldoc perl/Git/I18N.pm` for more info. |
| |
| |
| Testing marked strings |
| ---------------------- |
| |
| Git's tests are run under LANG=C LC_ALL=C. So the tests do not need be |
| changed to account for translations as they're added. |