/*
 * Driver for M-5MOLS 8M Pixel camera sensor with ISP
 *
 * Copyright (C) 2011 Samsung Electronics Co., Ltd.
 * Author: HeungJun Kim, riverful.kim@samsung.com
 *
 * Copyright (C) 2009 Samsung Electronics Co., Ltd.
 * Author: Dongsoo Nathaniel Kim, dongsoo45.kim@samsung.com
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 */

#include <linux/i2c.h>
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/version.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/videodev2.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-subdev.h>
#include <media/m5mols.h>

#include "m5mols.h"
#include "m5mols_reg.h"

int m5mols_debug;
module_param(m5mols_debug, int, 0644);

#define MODULE_NAME		"M5MOLS"
#define M5MOLS_I2C_CHECK_RETRY	500

/* The regulator consumer names for external voltage regulators */
static struct regulator_bulk_data supplies[] = {
	{
		.supply = "core",	/* ARM core power, 1.2V */
	}, {
		.supply	= "dig_18",	/* digital power 1, 1.8V */
	}, {
		.supply	= "d_sensor",	/* sensor power 1, 1.8V */
	}, {
		.supply	= "dig_28",	/* digital power 2, 2.8V */
	}, {
		.supply	= "a_sensor",	/* analog power */
	}, {
		.supply	= "dig_12",	/* digital power 3, 1.2V */
	},
};

static struct v4l2_mbus_framefmt m5mols_default_ffmt[M5MOLS_RESTYPE_MAX] = {
	[M5MOLS_RESTYPE_MONITOR] = {
		.width		= 1920,
		.height		= 1080,
		.code		= V4L2_MBUS_FMT_VYUY8_2X8,
		.field		= V4L2_FIELD_NONE,
		.colorspace	= V4L2_COLORSPACE_JPEG,
	},
	[M5MOLS_RESTYPE_CAPTURE] = {
		.width		= 1920,
		.height		= 1080,
		.code		= V4L2_MBUS_FMT_JPEG_1X8,
		.field		= V4L2_FIELD_NONE,
		.colorspace	= V4L2_COLORSPACE_JPEG,
	},
};
#define SIZE_DEFAULT_FFMT	ARRAY_SIZE(m5mols_default_ffmt)

static const struct m5mols_resolution m5mols_reg_res[] = {
	{ 0x01, M5MOLS_RESTYPE_MONITOR, 128, 96 },	/* SUB-QCIF */
	{ 0x03, M5MOLS_RESTYPE_MONITOR, 160, 120 },	/* QQVGA */
	{ 0x05, M5MOLS_RESTYPE_MONITOR, 176, 144 },	/* QCIF */
	{ 0x06, M5MOLS_RESTYPE_MONITOR, 176, 176 },
	{ 0x08, M5MOLS_RESTYPE_MONITOR, 240, 320 },	/* QVGA */
	{ 0x09, M5MOLS_RESTYPE_MONITOR, 320, 240 },	/* QVGA */
	{ 0x0c, M5MOLS_RESTYPE_MONITOR, 240, 400 },	/* WQVGA */
	{ 0x0d, M5MOLS_RESTYPE_MONITOR, 400, 240 },	/* WQVGA */
	{ 0x0e, M5MOLS_RESTYPE_MONITOR, 352, 288 },	/* CIF */
	{ 0x13, M5MOLS_RESTYPE_MONITOR, 480, 360 },
	{ 0x15, M5MOLS_RESTYPE_MONITOR, 640, 360 },	/* qHD */
	{ 0x17, M5MOLS_RESTYPE_MONITOR, 640, 480 },	/* VGA */
	{ 0x18, M5MOLS_RESTYPE_MONITOR, 720, 480 },
	{ 0x1a, M5MOLS_RESTYPE_MONITOR, 800, 480 },	/* WVGA */
	{ 0x1f, M5MOLS_RESTYPE_MONITOR, 800, 600 },	/* SVGA */
	{ 0x21, M5MOLS_RESTYPE_MONITOR, 1280, 720 },	/* HD */
	{ 0x25, M5MOLS_RESTYPE_MONITOR, 1920, 1080 },	/* 1080p */
	{ 0x29, M5MOLS_RESTYPE_MONITOR, 3264, 2448 },	/* 2.63fps 8M */
	{ 0x39, M5MOLS_RESTYPE_MONITOR, 800, 602 },	/* AHS_MON debug */

	{ 0x02, M5MOLS_RESTYPE_CAPTURE, 320, 240 },	/* QVGA */
	{ 0x04, M5MOLS_RESTYPE_CAPTURE, 400, 240 },	/* WQVGA */
	{ 0x07, M5MOLS_RESTYPE_CAPTURE, 480, 360 },
	{ 0x08, M5MOLS_RESTYPE_CAPTURE, 640, 360 },	/* qHD */
	{ 0x09, M5MOLS_RESTYPE_CAPTURE, 640, 480 },	/* VGA */
	{ 0x0a, M5MOLS_RESTYPE_CAPTURE, 800, 480 },	/* WVGA */
	{ 0x10, M5MOLS_RESTYPE_CAPTURE, 1280, 720 },	/* HD */
	{ 0x14, M5MOLS_RESTYPE_CAPTURE, 1280, 960 },	/* 1M */
	{ 0x17, M5MOLS_RESTYPE_CAPTURE, 1600, 1200 },	/* 2M */
	{ 0x19, M5MOLS_RESTYPE_CAPTURE, 1920, 1080 },	/* Full-HD */
	{ 0x1a, M5MOLS_RESTYPE_CAPTURE, 2048, 1152 },	/* 3Mega */
	{ 0x1b, M5MOLS_RESTYPE_CAPTURE, 2048, 1536 },
	{ 0x1c, M5MOLS_RESTYPE_CAPTURE, 2560, 1440 },	/* 4Mega */
	{ 0x1d, M5MOLS_RESTYPE_CAPTURE, 2560, 1536 },
	{ 0x1f, M5MOLS_RESTYPE_CAPTURE, 2560, 1920 },	/* 5Mega */
	{ 0x21, M5MOLS_RESTYPE_CAPTURE, 3264, 1836 },	/* 6Mega */
	{ 0x22, M5MOLS_RESTYPE_CAPTURE, 3264, 1960 },
	{ 0x25, M5MOLS_RESTYPE_CAPTURE, 3264, 2448 },	/* 8Mega */
};

/**
 * m5mols_swap_byte - an byte array to integer conversion function
 * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet
 *
 * Convert I2C data byte array with performing any required byte
 * reordering to assure proper values for each data type, regardless
 * of the architecture endianness.
 */
static u32 m5mols_swap_byte(u8 *data, u8 length)
{
	if (length == 1)
		return *data;
	else if (length == 2)
		return be16_to_cpu(*((u16 *)data));
	else
		return be32_to_cpu(*((u32 *)data));
}

/**
 * m5mols_read -  I2C read function
 * @reg: combination of size, category and command for the I2C packet
 * @val: read value
 */
int m5mols_read(struct v4l2_subdev *sd, u32 reg, u32 *val)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	u8 rbuf[M5MOLS_I2C_MAX_SIZE + 1];
	u8 size = I2C_SIZE(reg);
	u8 category = I2C_CATEGORY(reg);
	u8 cmd = I2C_COMMAND(reg);
	struct i2c_msg msg[2];
	u8 wbuf[5];
	int ret;

	if (!client->adapter)
		return -ENODEV;

	if (size != 1 && size != 2 && size != 4) {
		v4l2_err(sd, "Wrong data size\n");
		return -EINVAL;
	}

	msg[0].addr = client->addr;
	msg[0].flags = 0;
	msg[0].len = 5;
	msg[0].buf = wbuf;
	wbuf[0] = 5;
	wbuf[1] = M5MOLS_BYTE_READ;
	wbuf[2] = category;
	wbuf[3] = cmd;
	wbuf[4] = size;

	msg[1].addr = client->addr;
	msg[1].flags = I2C_M_RD;
	msg[1].len = size + 1;
	msg[1].buf = rbuf;

	/* minimum stabilization time */
	usleep_range(200, 200);

	ret = i2c_transfer(client->adapter, msg, 2);
	if (ret < 0) {
		v4l2_err(sd, "read failed: size:%d cat:%02x cmd:%02x. %d\n",
			 size, category, cmd, ret);
		return ret;
	}

	*val = m5mols_swap_byte(&rbuf[1], size);

	return 0;
}

/**
 * m5mols_write - I2C command write function
 * @reg: combination of size, category and command for the I2C packet
 * @val: value to write
 */
int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
{
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	u8 wbuf[M5MOLS_I2C_MAX_SIZE + 4];
	u8 category = I2C_CATEGORY(reg);
	u8 cmd = I2C_COMMAND(reg);
	u8 size	= I2C_SIZE(reg);
	u32 *buf = (u32 *)&wbuf[4];
	struct i2c_msg msg[1];
	int ret;

	if (!client->adapter)
		return -ENODEV;

	if (size != 1 && size != 2 && size != 4) {
		v4l2_err(sd, "Wrong data size\n");
		return -EINVAL;
	}

	msg->addr = client->addr;
	msg->flags = 0;
	msg->len = (u16)size + 4;
	msg->buf = wbuf;
	wbuf[0] = size + 4;
	wbuf[1] = M5MOLS_BYTE_WRITE;
	wbuf[2] = category;
	wbuf[3] = cmd;

	*buf = m5mols_swap_byte((u8 *)&val, size);

	usleep_range(200, 200);

	ret = i2c_transfer(client->adapter, msg, 1);
	if (ret < 0) {
		v4l2_err(sd, "write failed: size:%d cat:%02x cmd:%02x. %d\n",
			size, category, cmd, ret);
		return ret;
	}

	return 0;
}

int m5mols_busy(struct v4l2_subdev *sd, u8 category, u8 cmd, u32 mask)
{
	u32 busy, i;
	int ret;

	for (i = 0; i < M5MOLS_I2C_CHECK_RETRY; i++) {
		ret = m5mols_read(sd, I2C_REG(category, cmd, 1), &busy);
		if (ret < 0)
			return ret;
		if ((busy & mask) == mask)
			return 0;
	}
	return -EBUSY;
}

/**
 * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts
 *
 * Before writing desired interrupt value the INT_FACTOR register should
 * be read to clear pending interrupts.
 */
int m5mols_enable_interrupt(struct v4l2_subdev *sd, u32 reg)
{
	struct m5mols_info *info = to_m5mols(sd);
	u32 mask = is_available_af(info) ? REG_INT_AF : 0;
	u32 dummy;
	int ret;

	ret = m5mols_read(sd, SYSTEM_INT_FACTOR, &dummy);
	if (!ret)
		ret = m5mols_write(sd, SYSTEM_INT_ENABLE, reg & ~mask);
	return ret;
}

/**
 * m5mols_reg_mode - Write the mode and check busy status
 *
 * It always accompanies a little delay changing the M-5MOLS mode, so it is
 * needed checking current busy status to guarantee right mode.
 */
static int m5mols_reg_mode(struct v4l2_subdev *sd, u32 mode)
{
	int ret = m5mols_write(sd, SYSTEM_SYSMODE, mode);

	return ret ? ret : m5mols_busy(sd, CAT_SYSTEM, CAT0_SYSMODE, mode);
}

/**
 * m5mols_mode - manage the M-5MOLS's mode
 * @mode: the required operation mode
 *
 * The commands of M-5MOLS are grouped into specific modes. Each functionality
 * can be guaranteed only when the sensor is operating in mode which which
 * a command belongs to.
 */
int m5mols_mode(struct m5mols_info *info, u32 mode)
{
	struct v4l2_subdev *sd = &info->sd;
	int ret = -EINVAL;
	u32 reg;

	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
		return ret;

	ret = m5mols_read(sd, SYSTEM_SYSMODE, &reg);
	if ((!ret && reg == mode) || ret)
		return ret;

	switch (reg) {
	case REG_PARAMETER:
		ret = m5mols_reg_mode(sd, REG_MONITOR);
		if (!ret && mode == REG_MONITOR)
			break;
		if (!ret)
			ret = m5mols_reg_mode(sd, REG_CAPTURE);
		break;

	case REG_MONITOR:
		if (mode == REG_PARAMETER) {
			ret = m5mols_reg_mode(sd, REG_PARAMETER);
			break;
		}

		ret = m5mols_reg_mode(sd, REG_CAPTURE);
		break;

	case REG_CAPTURE:
		ret = m5mols_reg_mode(sd, REG_MONITOR);
		if (!ret && mode == REG_MONITOR)
			break;
		if (!ret)
			ret = m5mols_reg_mode(sd, REG_PARAMETER);
		break;

	default:
		v4l2_warn(sd, "Wrong mode: %d\n", mode);
	}

	if (!ret)
		info->mode = mode;

	return ret;
}

/**
 * m5mols_get_version - retrieve full revisions information of M-5MOLS
 *
 * The version information includes revisions of hardware and firmware,
 * AutoFocus alghorithm version and the version string.
 */
static int m5mols_get_version(struct v4l2_subdev *sd)
{
	struct m5mols_info *info = to_m5mols(sd);
	union {
		struct m5mols_version ver;
		u8 bytes[VERSION_SIZE];
	} version;
	u32 *value;
	u8 cmd = CAT0_VER_CUSTOMER;
	int ret;

	do {
		value = (u32 *)&version.bytes[cmd];
		ret = m5mols_read(sd, SYSTEM_CMD(cmd), value);
		if (ret)
			return ret;
	} while (cmd++ != CAT0_VER_AWB);

	do {
		value = (u32 *)&version.bytes[cmd];
		ret = m5mols_read(sd, SYSTEM_VER_STRING, value);
		if (ret)
			return ret;
		if (cmd >= VERSION_SIZE - 1)
			return -EINVAL;
	} while (version.bytes[cmd++]);

	value = (u32 *)&version.bytes[cmd];
	ret = m5mols_read(sd, AF_VERSION, value);
	if (ret)
		return ret;

	/* store version information swapped for being readable */
	info->ver	= version.ver;
	info->ver.fw	= be16_to_cpu(info->ver.fw);
	info->ver.hw	= be16_to_cpu(info->ver.hw);
	info->ver.param	= be16_to_cpu(info->ver.param);
	info->ver.awb	= be16_to_cpu(info->ver.awb);

	v4l2_info(sd, "Manufacturer\t[%s]\n",
			is_manufacturer(info, REG_SAMSUNG_ELECTRO) ?
			"Samsung Electro-Machanics" :
			is_manufacturer(info, REG_SAMSUNG_OPTICS) ?
			"Samsung Fiber-Optics" :
			is_manufacturer(info, REG_SAMSUNG_TECHWIN) ?
			"Samsung Techwin" : "None");
	v4l2_info(sd, "Customer/Project\t[0x%02x/0x%02x]\n",
			info->ver.customer, info->ver.project);

	if (!is_available_af(info))
		v4l2_info(sd, "No support Auto Focus on this firmware\n");

	return ret;
}

/**
 * __find_restype - Lookup M-5MOLS resolution type according to pixel code
 * @code: pixel code
 */
static enum m5mols_restype __find_restype(enum v4l2_mbus_pixelcode code)
{
	enum m5mols_restype type = M5MOLS_RESTYPE_MONITOR;

	do {
		if (code == m5mols_default_ffmt[type].code)
			return type;
	} while (type++ != SIZE_DEFAULT_FFMT);

	return 0;
}

/**
 * __find_resolution - Lookup preset and type of M-5MOLS's resolution
 * @mf: pixel format to find/negotiate the resolution preset for
 * @type: M-5MOLS resolution type
 * @resolution:	M-5MOLS resolution preset register value
 *
 * Find nearest resolution matching resolution preset and adjust mf
 * to supported values.
 */
static int __find_resolution(struct v4l2_subdev *sd,
			     struct v4l2_mbus_framefmt *mf,
			     enum m5mols_restype *type,
			     u32 *resolution)
{
	const struct m5mols_resolution *fsize = &m5mols_reg_res[0];
	const struct m5mols_resolution *match = NULL;
	enum m5mols_restype stype = __find_restype(mf->code);
	int i = ARRAY_SIZE(m5mols_reg_res);
	unsigned int min_err = ~0;

	while (i--) {
		int err;
		if (stype == fsize->type) {
			err = abs(fsize->width - mf->width)
				+ abs(fsize->height - mf->height);

			if (err < min_err) {
				min_err = err;
				match = fsize;
			}
		}
		fsize++;
	}
	if (match) {
		mf->width  = match->width;
		mf->height = match->height;
		*resolution = match->reg;
		*type = stype;
		return 0;
	}

	return -EINVAL;
}

static struct v4l2_mbus_framefmt *__find_format(struct m5mols_info *info,
				struct v4l2_subdev_fh *fh,
				enum v4l2_subdev_format_whence which,
				enum m5mols_restype type)
{
	if (which == V4L2_SUBDEV_FORMAT_TRY)
		return fh ? v4l2_subdev_get_try_format(fh, 0) : NULL;

	return &info->ffmt[type];
}

static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
			  struct v4l2_subdev_format *fmt)
{
	struct m5mols_info *info = to_m5mols(sd);
	struct v4l2_mbus_framefmt *format;

	if (fmt->pad != 0)
		return -EINVAL;

	format = __find_format(info, fh, fmt->which, info->res_type);
	if (!format)
		return -EINVAL;

	fmt->format = *format;
	return 0;
}

static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
			  struct v4l2_subdev_format *fmt)
{
	struct m5mols_info *info = to_m5mols(sd);
	struct v4l2_mbus_framefmt *format = &fmt->format;
	struct v4l2_mbus_framefmt *sfmt;
	enum m5mols_restype type;
	u32 resolution = 0;
	int ret;

	if (fmt->pad != 0)
		return -EINVAL;

	ret = __find_resolution(sd, format, &type, &resolution);
	if (ret < 0)
		return ret;

	sfmt = __find_format(info, fh, fmt->which, type);
	if (!sfmt)
		return 0;

	*sfmt		= m5mols_default_ffmt[type];
	sfmt->width	= format->width;
	sfmt->height	= format->height;

	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
		info->resolution = resolution;
		info->code = format->code;
		info->res_type = type;
	}

	return 0;
}

static int m5mols_enum_mbus_code(struct v4l2_subdev *sd,
				 struct v4l2_subdev_fh *fh,
				 struct v4l2_subdev_mbus_code_enum *code)
{
	if (!code || code->index >= SIZE_DEFAULT_FFMT)
		return -EINVAL;

	code->code = m5mols_default_ffmt[code->index].code;

	return 0;
}

static struct v4l2_subdev_pad_ops m5mols_pad_ops = {
	.enum_mbus_code	= m5mols_enum_mbus_code,
	.get_fmt	= m5mols_get_fmt,
	.set_fmt	= m5mols_set_fmt,
};

/**
 * m5mols_sync_controls - Apply default scene mode and the current controls
 *
 * This is used only streaming for syncing between v4l2_ctrl framework and
 * m5mols's controls. First, do the scenemode to the sensor, then call
 * v4l2_ctrl_handler_setup. It can be same between some commands and
 * the scenemode's in the default v4l2_ctrls. But, such commands of control
 * should be prior to the scenemode's one.
 */
int m5mols_sync_controls(struct m5mols_info *info)
{
	int ret = -EINVAL;

	if (!is_ctrl_synced(info)) {
		ret = m5mols_do_scenemode(info, REG_SCENE_NORMAL);
		if (ret)
			return ret;

		v4l2_ctrl_handler_setup(&info->handle);
		info->ctrl_sync = true;
	}

	return ret;
}

/**
 * m5mols_start_monitor - Start the monitor mode
 *
 * Before applying the controls setup the resolution and frame rate
 * in PARAMETER mode, and then switch over to MONITOR mode.
 */
static int m5mols_start_monitor(struct m5mols_info *info)
{
	struct v4l2_subdev *sd = &info->sd;
	int ret;

	ret = m5mols_mode(info, REG_PARAMETER);
	if (!ret)
		ret = m5mols_write(sd, PARM_MON_SIZE, info->resolution);
	if (!ret)
		ret = m5mols_write(sd, PARM_MON_FPS, REG_FPS_30);
	if (!ret)
		ret = m5mols_mode(info, REG_MONITOR);
	if (!ret)
		ret = m5mols_sync_controls(info);

	return ret;
}

static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
{
	struct m5mols_info *info = to_m5mols(sd);

	if (enable) {
		int ret = -EINVAL;

		if (is_code(info->code, M5MOLS_RESTYPE_MONITOR))
			ret = m5mols_start_monitor(info);
		if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE))
			ret = m5mols_start_capture(info);

		return ret;
	}

	return m5mols_mode(info, REG_PARAMETER);
}

static const struct v4l2_subdev_video_ops m5mols_video_ops = {
	.s_stream	= m5mols_s_stream,
};

static int m5mols_s_ctrl(struct v4l2_ctrl *ctrl)
{
	struct v4l2_subdev *sd = to_sd(ctrl);
	struct m5mols_info *info = to_m5mols(sd);
	int ret;

	info->mode_save = info->mode;

	ret = m5mols_mode(info, REG_PARAMETER);
	if (!ret)
		ret = m5mols_set_ctrl(ctrl);
	if (!ret)
		ret = m5mols_mode(info, info->mode_save);

	return ret;
}

static const struct v4l2_ctrl_ops m5mols_ctrl_ops = {
	.s_ctrl	= m5mols_s_ctrl,
};

static int m5mols_sensor_power(struct m5mols_info *info, bool enable)
{
	struct v4l2_subdev *sd = &info->sd;
	struct i2c_client *client = v4l2_get_subdevdata(sd);
	const struct m5mols_platform_data *pdata = info->pdata;
	int ret;

	if (enable) {
		if (is_powered(info))
			return 0;

		if (info->set_power) {
			ret = info->set_power(&client->dev, 1);
			if (ret)
				return ret;
		}

		ret = regulator_bulk_enable(ARRAY_SIZE(supplies), supplies);
		if (ret) {
			info->set_power(&client->dev, 0);
			return ret;
		}

		gpio_set_value(pdata->gpio_reset, !pdata->reset_polarity);
		usleep_range(1000, 1000);
		info->power = true;

		return ret;
	}

	if (!is_powered(info))
		return 0;

	ret = regulator_bulk_disable(ARRAY_SIZE(supplies), supplies);
	if (ret)
		return ret;

	if (info->set_power)
		info->set_power(&client->dev, 0);

	gpio_set_value(pdata->gpio_reset, pdata->reset_polarity);
	usleep_range(1000, 1000);
	info->power = false;

	return ret;
}

/* m5mols_update_fw - optional firmware update routine */
int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd,
		int (*set_power)(struct m5mols_info *, bool))
{
	return 0;
}

/**
 * m5mols_sensor_armboot - Booting M-5MOLS internal ARM core.
 *
 * Booting internal ARM core makes the M-5MOLS is ready for getting commands
 * with I2C. It's the first thing to be done after it powered up. It must wait
 * at least 520ms recommended by M-5MOLS datasheet, after executing arm booting.
 */
static int m5mols_sensor_armboot(struct v4l2_subdev *sd)
{
	int ret;

	ret = m5mols_write(sd, FLASH_CAM_START, REG_START_ARM_BOOT);
	if (ret < 0)
		return ret;

	msleep(520);

	ret = m5mols_get_version(sd);
	if (!ret)
		ret = m5mols_update_fw(sd, m5mols_sensor_power);
	if (ret)
		return ret;

	v4l2_dbg(1, m5mols_debug, sd, "Success ARM Booting\n");

	ret = m5mols_write(sd, PARM_INTERFACE, REG_INTERFACE_MIPI);
	if (!ret)
		ret = m5mols_enable_interrupt(sd, REG_INT_AF);

	return ret;
}

static int m5mols_init_controls(struct m5mols_info *info)
{
	struct v4l2_subdev *sd = &info->sd;
	u16 max_exposure;
	u16 step_zoom;
	int ret;

	/* Determine value's range & step of controls for various FW version */
	ret = m5mols_read(sd, AE_MAX_GAIN_MON, (u32 *)&max_exposure);
	if (!ret)
		step_zoom = is_manufacturer(info, REG_SAMSUNG_OPTICS) ? 31 : 1;
	if (ret)
		return ret;

	v4l2_ctrl_handler_init(&info->handle, 6);
	info->autowb = v4l2_ctrl_new_std(&info->handle,
			&m5mols_ctrl_ops, V4L2_CID_AUTO_WHITE_BALANCE,
			0, 1, 1, 0);
	info->saturation = v4l2_ctrl_new_std(&info->handle,
			&m5mols_ctrl_ops, V4L2_CID_SATURATION,
			1, 5, 1, 3);
	info->zoom = v4l2_ctrl_new_std(&info->handle,
			&m5mols_ctrl_ops, V4L2_CID_ZOOM_ABSOLUTE,
			1, 70, step_zoom, 1);
	info->exposure = v4l2_ctrl_new_std(&info->handle,
			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE,
			0, max_exposure, 1, (int)max_exposure/2);
	info->colorfx = v4l2_ctrl_new_std_menu(&info->handle,
			&m5mols_ctrl_ops, V4L2_CID_COLORFX,
			4, (1 << V4L2_COLORFX_BW), V4L2_COLORFX_NONE);
	info->autoexposure = v4l2_ctrl_new_std_menu(&info->handle,
			&m5mols_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
			1, 0, V4L2_EXPOSURE_MANUAL);

	sd->ctrl_handler = &info->handle;
	if (info->handle.error) {
		v4l2_err(sd, "Failed to initialize controls: %d\n", ret);
		v4l2_ctrl_handler_free(&info->handle);
		return info->handle.error;
	}

	v4l2_ctrl_cluster(2, &info->autoexposure);

	return 0;
}

/**
 * m5mols_s_power - Main sensor power control function
 *
 * To prevent breaking the lens when the sensor is powered off the Soft-Landing
 * algorithm is called where available. The Soft-Landing algorithm availability
 * dependends on the firmware provider.
 */
static int m5mols_s_power(struct v4l2_subdev *sd, int on)
{
	struct m5mols_info *info = to_m5mols(sd);
	int ret;

	if (on) {
		ret = m5mols_sensor_power(info, true);
		if (!ret)
			ret = m5mols_sensor_armboot(sd);
		if (!ret)
			ret = m5mols_init_controls(info);
		if (ret)
			return ret;

		info->ffmt[M5MOLS_RESTYPE_MONITOR] =
			m5mols_default_ffmt[M5MOLS_RESTYPE_MONITOR];
		info->ffmt[M5MOLS_RESTYPE_CAPTURE] =
			m5mols_default_ffmt[M5MOLS_RESTYPE_CAPTURE];
		return ret;
	}

	if (is_manufacturer(info, REG_SAMSUNG_TECHWIN)) {
		ret = m5mols_mode(info, REG_MONITOR);
		if (!ret)
			ret = m5mols_write(sd, AF_EXECUTE, REG_AF_STOP);
		if (!ret)
			ret = m5mols_write(sd, AF_MODE, REG_AF_POWEROFF);
		if (!ret)
			ret = m5mols_busy(sd, CAT_SYSTEM, CAT0_STATUS,
					REG_AF_IDLE);
		if (!ret)
			v4l2_info(sd, "Success soft-landing lens\n");
	}

	ret = m5mols_sensor_power(info, false);
	if (!ret) {
		v4l2_ctrl_handler_free(&info->handle);
		info->ctrl_sync = false;
	}

	return ret;
}

static int m5mols_log_status(struct v4l2_subdev *sd)
{
	struct m5mols_info *info = to_m5mols(sd);

	v4l2_ctrl_handler_log_status(&info->handle, sd->name);

	return 0;
}

static const struct v4l2_subdev_core_ops m5mols_core_ops = {
	.s_power	= m5mols_s_power,
	.g_ctrl		= v4l2_subdev_g_ctrl,
	.s_ctrl		= v4l2_subdev_s_ctrl,
	.queryctrl	= v4l2_subdev_queryctrl,
	.querymenu	= v4l2_subdev_querymenu,
	.g_ext_ctrls	= v4l2_subdev_g_ext_ctrls,
	.try_ext_ctrls	= v4l2_subdev_try_ext_ctrls,
	.s_ext_ctrls	= v4l2_subdev_s_ext_ctrls,
	.log_status	= m5mols_log_status,
};

static const struct v4l2_subdev_ops m5mols_ops = {
	.core		= &m5mols_core_ops,
	.pad		= &m5mols_pad_ops,
	.video		= &m5mols_video_ops,
};

static void m5mols_irq_work(struct work_struct *work)
{
	struct m5mols_info *info =
		container_of(work, struct m5mols_info, work_irq);
	struct v4l2_subdev *sd = &info->sd;
	u32 reg;
	int ret;

	if (!is_powered(info) ||
			m5mols_read(sd, SYSTEM_INT_FACTOR, &info->interrupt))
		return;

	switch (info->interrupt & REG_INT_MASK) {
	case REG_INT_AF:
		if (!is_available_af(info))
			break;
		ret = m5mols_read(sd, AF_STATUS, &reg);
		v4l2_dbg(2, m5mols_debug, sd, "AF %s\n",
			 reg == REG_AF_FAIL ? "Failed" :
			 reg == REG_AF_SUCCESS ? "Success" :
			 reg == REG_AF_IDLE ? "Idle" : "Busy");
		break;
	case REG_INT_CAPTURE:
		if (!test_and_set_bit(ST_CAPT_IRQ, &info->flags))
			wake_up_interruptible(&info->irq_waitq);

		v4l2_dbg(2, m5mols_debug, sd, "CAPTURE\n");
		break;
	default:
		v4l2_dbg(2, m5mols_debug, sd, "Undefined: %02x\n", reg);
		break;
	};
}

static irqreturn_t m5mols_irq_handler(int irq, void *data)
{
	struct v4l2_subdev *sd = data;
	struct m5mols_info *info = to_m5mols(sd);

	schedule_work(&info->work_irq);

	return IRQ_HANDLED;
}

static int __devinit m5mols_probe(struct i2c_client *client,
				  const struct i2c_device_id *id)
{
	const struct m5mols_platform_data *pdata = client->dev.platform_data;
	struct m5mols_info *info;
	struct v4l2_subdev *sd;
	int ret;

	if (pdata == NULL) {
		dev_err(&client->dev, "No platform data\n");
		return -EINVAL;
	}

	if (!gpio_is_valid(pdata->gpio_reset)) {
		dev_err(&client->dev, "No valid RESET GPIO specified\n");
		return -EINVAL;
	}

	if (!pdata->irq) {
		dev_err(&client->dev, "Interrupt not assigned\n");
		return -EINVAL;
	}

	info = kzalloc(sizeof(struct m5mols_info), GFP_KERNEL);
	if (!info)
		return -ENOMEM;

	info->pdata = pdata;
	info->set_power	= pdata->set_power;

	ret = gpio_request(pdata->gpio_reset, "M5MOLS_NRST");
	if (ret) {
		dev_err(&client->dev, "Failed to request gpio: %d\n", ret);
		goto out_free;
	}
	gpio_direction_output(pdata->gpio_reset, pdata->reset_polarity);

	ret = regulator_bulk_get(&client->dev, ARRAY_SIZE(supplies), supplies);
	if (ret) {
		dev_err(&client->dev, "Failed to get regulators: %d\n", ret);
		goto out_gpio;
	}

	sd = &info->sd;
	strlcpy(sd->name, MODULE_NAME, sizeof(sd->name));
	v4l2_i2c_subdev_init(sd, client, &m5mols_ops);

	info->pad.flags = MEDIA_PAD_FL_SOURCE;
	ret = media_entity_init(&sd->entity, 1, &info->pad, 0);
	if (ret < 0)
		goto out_reg;
	sd->entity.type = MEDIA_ENT_T_V4L2_SUBDEV_SENSOR;

	init_waitqueue_head(&info->irq_waitq);
	INIT_WORK(&info->work_irq, m5mols_irq_work);
	ret = request_irq(pdata->irq, m5mols_irq_handler,
			  IRQF_TRIGGER_RISING, MODULE_NAME, sd);
	if (ret) {
		dev_err(&client->dev, "Interrupt request failed: %d\n", ret);
		goto out_me;
	}
	info->res_type = M5MOLS_RESTYPE_MONITOR;
	return 0;
out_me:
	media_entity_cleanup(&sd->entity);
out_reg:
	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
out_gpio:
	gpio_free(pdata->gpio_reset);
out_free:
	kfree(info);
	return ret;
}

static int __devexit m5mols_remove(struct i2c_client *client)
{
	struct v4l2_subdev *sd = i2c_get_clientdata(client);
	struct m5mols_info *info = to_m5mols(sd);

	v4l2_device_unregister_subdev(sd);
	free_irq(info->pdata->irq, sd);

	regulator_bulk_free(ARRAY_SIZE(supplies), supplies);
	gpio_free(info->pdata->gpio_reset);
	media_entity_cleanup(&sd->entity);
	kfree(info);
	return 0;
}

static const struct i2c_device_id m5mols_id[] = {
	{ MODULE_NAME, 0 },
	{ },
};
MODULE_DEVICE_TABLE(i2c, m5mols_id);

static struct i2c_driver m5mols_i2c_driver = {
	.driver = {
		.name	= MODULE_NAME,
	},
	.probe		= m5mols_probe,
	.remove		= __devexit_p(m5mols_remove),
	.id_table	= m5mols_id,
};

static int __init m5mols_mod_init(void)
{
	return i2c_add_driver(&m5mols_i2c_driver);
}

static void __exit m5mols_mod_exit(void)
{
	i2c_del_driver(&m5mols_i2c_driver);
}

module_init(m5mols_mod_init);
module_exit(m5mols_mod_exit);

MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>");
MODULE_AUTHOR("Dongsoo Kim <dongsoo45.kim@samsung.com>");
MODULE_DESCRIPTION("Fujitsu M-5MOLS 8M Pixel camera driver");
MODULE_LICENSE("GPL");