/*
 * Copyright (c) 2007-2008 Atheros Communications Inc.
 *
 * Permission to use, copy, modify, and/or distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
#include "../80211core/cprecomp.h"
#include "hpani.h"
#include "hpusb.h"
#include "hpreg.h"
#include "../80211core/ratectrl.h"

extern void zfIdlCmd(zdev_t* dev, u32_t* cmd, u16_t cmdLen);

extern void zfCoreCwmBusy(zdev_t* dev, u16_t busy);
u16_t zfDelayWriteInternalReg(zdev_t* dev, u32_t addr, u32_t val);
u16_t zfFlushDelayWrite(zdev_t* dev);

//#define zm_hp_priv(x) struct zsHpPriv* hpPriv=zgWlanDev.hpPrivate;

void zfInitCmdQueue(zdev_t* dev)
{
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv = (struct zsHpPriv*)(wd->hpPrivate);

    zmw_declare_for_critical_section();

    zmw_enter_critical_section(dev);
#ifdef ZM_XP_USB_MULTCMD
    hpPriv->cmdTail = hpPriv->cmdHead = hpPriv->cmdSend = 0;
#else
    hpPriv->cmdTail = hpPriv->cmdHead = 0;
#endif
    hpPriv->cmdPending = 0;
    hpPriv->cmd.delayWcmdCount = 0;
    zmw_leave_critical_section(dev);
}

u16_t zfPutCmd(zdev_t* dev, u32_t* cmd, u16_t cmdLen, u16_t src, u8_t* buf)
{
    u16_t i;
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    /* Make sure command length < ZM_MAX_CMD_SIZE */
    zm_assert(cmdLen <= ZM_MAX_CMD_SIZE);
    /* Make sure command queue not full */
    //zm_assert(((hpPriv->cmdTail+1) & (ZM_CMD_QUEUE_SIZE-1)) != hpPriv->cmdHead);
    if (((hpPriv->cmdTail+1) & (ZM_CMD_QUEUE_SIZE-1)) == hpPriv->cmdHead ) {
        zm_debug_msg0("CMD queue full!!");
        return 0;
    }

    hpPriv->cmdQ[hpPriv->cmdTail].cmdLen = cmdLen;
    hpPriv->cmdQ[hpPriv->cmdTail].src = src;
    hpPriv->cmdQ[hpPriv->cmdTail].buf = buf;
    for (i=0; i<(cmdLen>>2); i++)
    {
        hpPriv->cmdQ[hpPriv->cmdTail].cmd[i] = cmd[i];
    }

    hpPriv->cmdTail = (hpPriv->cmdTail+1) & (ZM_CMD_QUEUE_SIZE-1);

    return 0;
}

u16_t zfGetCmd(zdev_t* dev, u32_t* cmd, u16_t* cmdLen, u16_t* src, u8_t** buf)
{
    u16_t i;
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    if (hpPriv->cmdTail == hpPriv->cmdHead)
    {
        return 3;
    }

    *cmdLen = hpPriv->cmdQ[hpPriv->cmdHead].cmdLen;
    *src = hpPriv->cmdQ[hpPriv->cmdHead].src;
    *buf = hpPriv->cmdQ[hpPriv->cmdHead].buf;
    for (i=0; i<((*cmdLen)>>2); i++)
    {
        cmd[i] = hpPriv->cmdQ[hpPriv->cmdHead].cmd[i];
    }

    hpPriv->cmdHead = (hpPriv->cmdHead+1) & (ZM_CMD_QUEUE_SIZE-1);

    return 0;
}

#ifdef ZM_XP_USB_MULTCMD
void zfSendCmdEx(zdev_t* dev)
{
    u32_t ncmd[ZM_MAX_CMD_SIZE/4];
    u16_t ncmdLen = 0;
    u16_t cmdFlag = 0;
    u16_t i;
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    zmw_declare_for_critical_section();

    zmw_enter_critical_section(dev);

    if (hpPriv->cmdPending == 0)
    {
        if (hpPriv->cmdTail != hpPriv->cmdSend)
        {
            cmdFlag = 1;
            /* Get queueing command */
            ncmdLen= hpPriv->cmdQ[hpPriv->cmdSend].cmdLen;
            for (i=0; i<(ncmdLen>>2); i++)
            {
                ncmd[i] = hpPriv->cmdQ[hpPriv->cmdSend].cmd[i];
            }
            hpPriv->cmdSend = (hpPriv->cmdSend+1) & (ZM_CMD_QUEUE_SIZE-1);

            hpPriv->cmdPending = 1;
        }
    }

    zmw_leave_critical_section(dev);

    if ((cmdFlag == 1))
    {
        zfIdlCmd(dev, ncmd, ncmdLen);
    }
}

void zfiSendCmdComp(zdev_t* dev)
{
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    zmw_declare_for_critical_section();

    zmw_enter_critical_section(dev);
    hpPriv->cmdPending = 0;
    zmw_leave_critical_section(dev);

    zfSendCmdEx(dev);
}
#endif

u16_t zfIssueCmd(zdev_t* dev, u32_t* cmd, u16_t cmdLen, u16_t src, u8_t* buf)
{
    u16_t cmdFlag = 0;
    u16_t ret;
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    zmw_declare_for_critical_section();

    zm_msg2_mm(ZM_LV_1, "cmdLen=", cmdLen);

    zmw_enter_critical_section(dev);

#ifdef ZM_XP_USB_MULTCMD
    ret = zfPutCmd(dev, cmd, cmdLen, src, buf);
    zmw_leave_critical_section(dev);

    if (ret != 0)
    {
        return 1;
    }

    zfSendCmdEx(dev);
#else
    if (hpPriv->cmdPending == 0)
    {
        hpPriv->cmdPending = 1;
        cmdFlag = 1;
    }
    ret = zfPutCmd(dev, cmd, cmdLen, src, buf);

    zmw_leave_critical_section(dev);

    if (ret != 0)
    {
        return 1;
    }

    if (cmdFlag == 1)
    {
        zfIdlCmd(dev, cmd, cmdLen);
    }
#endif
    return 0;
}

void zfIdlRsp(zdev_t* dev, u32_t* rsp, u16_t rspLen)
{
    u32_t cmd[ZM_MAX_CMD_SIZE/4];
    u16_t cmdLen;
    u16_t src;
    u8_t* buf;
    u32_t ncmd[ZM_MAX_CMD_SIZE/4];
    u16_t ncmdLen = 0;
    u16_t ret;
    u16_t cmdFlag = 0;
    u16_t i;
    s32_t nf;
    s32_t noisefloor[4];
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;


    zmw_declare_for_critical_section();

    zmw_enter_critical_section(dev);

    ret = zfGetCmd(dev, cmd, &cmdLen, &src, &buf);
    #if 0
    zm_assert(ret == 0);
    #else
    if (ret != 0)
    {
        zm_debug_msg0("Error IdlRsp because none cmd!!\n");
        #ifndef ZM_XP_USB_MULTCMD
        zmw_leave_critical_section(dev);
        return;
        #endif
    }
    #endif
#ifdef ZM_XP_USB_MULTCMD
    zmw_leave_critical_section(dev);
#else
    if (hpPriv->cmdTail != hpPriv->cmdHead)
    {
        cmdFlag = 1;
        /* Get queueing command */
        ncmdLen= hpPriv->cmdQ[hpPriv->cmdHead].cmdLen;
        for (i=0; i<(ncmdLen>>2); i++)
        {
            ncmd[i] = hpPriv->cmdQ[hpPriv->cmdHead].cmd[i];
        }
    }
    else
    {
        hpPriv->cmdPending = 0;
    }

    zmw_leave_critical_section(dev);

    if (cmdFlag == 1)
    {
        zfIdlCmd(dev, ncmd, ncmdLen);
    }
#endif
    if (src == ZM_OID_READ)
    {
        ZM_PERFORMANCE_REG(dev, 0x11772c, rsp[1]);
        zfwDbgReadRegDone(dev, cmd[1], rsp[1]);
    }
    else if (src == ZM_OID_FLASH_CHKSUM)
    {
        zfwDbgGetFlashChkSumDone(dev, rsp+1);
    }
    else if (src == ZM_OID_FLASH_READ)
    {
        u32_t  datalen;

        datalen = (rsp[0] & 255);

        zfwDbgReadFlashDone(dev, cmd[1], rsp+1, datalen);
    }
    else if (src == ZM_OID_FLASH_PROGRAM)
    {
        /* Non do */
    }
    else if (src == ZM_OID_WRITE)
    {
        zfwDbgWriteRegDone(dev, cmd[1], cmd[2]);
    }
    else if (src == ZM_OID_TALLY)
    {
		zfCollectHWTally(dev, rsp, 0);
    }
    else if (src == ZM_OID_TALLY_APD)
    {
		zfCollectHWTally(dev, rsp, 1);
        zfwDbgReadTallyDone(dev);
#ifdef ZM_ENABLE_BA_RATECTRL
        zfRateCtrlAggrSta(dev);
#endif
    }
    else if (src == ZM_OID_DKTX_STATUS)
    {
        zm_debug_msg0("src = zm_OID_DKTX_STATUS");
        zfwDbgQueryHwTxBusyDone(dev, rsp[1]);
    }
    else if (src == ZM_CMD_SET_FREQUENCY)
    {

//#ifdef ZM_OTUS_ENABLE_RETRY_FREQ_CHANGE
#if 0
    zm_debug_msg1("Retry Set Frequency = ", rsp[1]);

    #if 1
    // Read the Noise Floor value !
    nf = ((rsp[2]>>19) & 0x1ff);
    if ((nf & 0x100) != 0x0)
    {
        noisefloor[0] = 0 - ((nf ^ 0x1ff) + 1);
    }
    else
    {
        noisefloor[0] = nf;
    }

    zm_debug_msg1("Noise Floor[1] = ", noisefloor[0]);

    nf = ((rsp[3]>>19) & 0x1ff);
    if ((nf & 0x100) != 0x0)
    {
        noisefloor[1] = 0 - ((nf ^ 0x1ff) + 1);
    }
    else
    {
        noisefloor[1] = nf;
    }

    zm_debug_msg1("Noise Floor[2] = ", noisefloor[1]);
    zm_debug_msg1("Is Site Survey = ", hpPriv->isSiteSurvey);
    #endif

        if ( (rsp[1] && hpPriv->freqRetryCounter == 0) ||
             (((noisefloor[0]>-60)||(noisefloor[1]>-60)) && hpPriv->freqRetryCounter==0) ||
             ((abs(noisefloor[0]-noisefloor[1])>=9) && hpPriv->freqRetryCounter==0) )
        {
            zm_debug_msg0("Retry to issue the frequency change command");

            if ( hpPriv->recordFreqRetryCounter == 1 )
            {
                zm_debug_msg0("Cold Reset");

                zfHpSetFrequencyEx(dev, hpPriv->latestFrequency,
                                        hpPriv->latestBw40,
                                        hpPriv->latestExtOffset,
                                        2);

                if ( hpPriv->isSiteSurvey != 2 )
                {
                    hpPriv->freqRetryCounter++;
                }
                hpPriv->recordFreqRetryCounter = 0;
            }
            else
            {
                zfHpSetFrequencyEx(dev, hpPriv->latestFrequency,
                                        hpPriv->latestBw40,
                                        hpPriv->latestExtOffset,
                                        0);
            }
            hpPriv->recordFreqRetryCounter++;
        }
        else
#endif

/* ret: Bit0: AGC calibration   0=>finish  1=>unfinish               */
/*      Bit1: Noise calibration 0=>finish  1=>unfinish               */
/*      Bit2: Noise calibration finish, but NF value unexcepted => 1 */
        if ( (rsp[1] & 0x1) || (rsp[1] & 0x4) )
        {
            zm_debug_msg1("Set Frequency fail : ret = ", rsp[1]);

            /* 1. AGC Calibration fail                                  */
            /* 2. Noise Calibration finish but error NoiseFloor value   */
            /*      and not in sitesurvey, try more twice               */
            if ( hpPriv->isSiteSurvey == 2 )
            {
                if ( hpPriv->recordFreqRetryCounter < 2 )
                {
                    /* cold reset */
                    zfHpSetFrequencyEx(dev, hpPriv->latestFrequency,
                                            hpPriv->latestBw40,
                                            hpPriv->latestExtOffset,
                                            2);
                    hpPriv->recordFreqRetryCounter++;
                    zm_debug_msg1("Retry to issue the frequency change command(cold reset) counter = ", hpPriv->recordFreqRetryCounter);
                }
                else
                {
                    /* Fail : we would not accept this result! */
                    zm_debug_msg0("\n\n\n\n  Fail twice cold reset \n\n\n\n");
                    hpPriv->coldResetNeedFreq = 0;
                    hpPriv->recordFreqRetryCounter = 0;
                    zfCoreSetFrequencyComplete(dev);
                }
            }
            else
            {
                /* in sitesurvey, coldreset in next channel */
                hpPriv->coldResetNeedFreq = 1;
                hpPriv->recordFreqRetryCounter = 0;
                zfCoreSetFrequencyComplete(dev);
            }
        }
        else if (rsp[1] & 0x2)
        {
            zm_debug_msg1("Set Frequency fail 2 : ret = ", rsp[1]);

            /* Noise Calibration un-finish                          */
            /*      and not in sitesurvey, try more once            */
            if ( hpPriv->isSiteSurvey == 2 )
            {
                if ( hpPriv->recordFreqRetryCounter < 1 )
                {
                    /* cold reset */
                    zfHpSetFrequencyEx(dev, hpPriv->latestFrequency,
                                            hpPriv->latestBw40,
                                            hpPriv->latestExtOffset,
                                            2);
                    hpPriv->recordFreqRetryCounter++;
                    zm_debug_msg1("2 Retry to issue the frequency change command(cold reset) counter = ", hpPriv->recordFreqRetryCounter);
                }
                else
                {
                    /* Fail : we would not accept this result! */
                    zm_debug_msg0("\n\n\n\n  2 Fail twice cold reset \n\n\n\n");
                    hpPriv->coldResetNeedFreq = 0;
                    hpPriv->recordFreqRetryCounter = 0;
                    zfCoreSetFrequencyComplete(dev);
                }
            }
            else
            {
                /* in sitesurvey, skip this frequency */
                hpPriv->coldResetNeedFreq = 0;
                hpPriv->recordFreqRetryCounter = 0;
                zfCoreSetFrequencyComplete(dev);
            }
        }
        //else if (rsp[1] & 0x4)
        //{
        //    zm_debug_msg1("Set Frequency fail 3 : ret = ", rsp[1]);
        //    hpPriv->coldResetNeedFreq = 0;
        //    hpPriv->recordFreqRetryCounter = 0;
        //    zfCoreSetFrequencyComplete(dev);
        //}
        else
        {
            //hpPriv->freqRetryCounter = 0;
            zm_debug_msg2(" return complete, ret = ", rsp[1]);

            /* set bb_heavy_clip_enable */
            if (hpPriv->enableBBHeavyClip && hpPriv->hwBBHeavyClip &&
                hpPriv->doBBHeavyClip)
            {
                u32_t setValue = 0x200;

                setValue |= hpPriv->setValueHeavyClip;

                //zm_dbg(("Do heavy clip setValue = %d\n", setValue));

                zfDelayWriteInternalReg(dev, 0x99e0+0x1bc000, setValue);
                zfFlushDelayWrite(dev);
            }

            hpPriv->coldResetNeedFreq = 0;
            hpPriv->recordFreqRetryCounter = 0;
    	    zfCoreSetFrequencyComplete(dev);
    	}

        #if 1
        // Read the Noise Floor value !
        nf = ((rsp[2]>>19) & 0x1ff);
        if ((nf & 0x100) != 0x0)
        {
            noisefloor[0] = 0 - ((nf ^ 0x1ff) + 1);
        }
        else
        {
            noisefloor[0] = nf;
        }

        //zm_debug_msg1("Noise Floor[1] = ", noisefloor[0]);

        nf = ((rsp[3]>>19) & 0x1ff);
        if ((nf & 0x100) != 0x0)
        {
            noisefloor[1] = 0 - ((nf ^ 0x1ff) + 1);
        }
        else
        {
            noisefloor[1] = nf;
        }

        //zm_debug_msg1("Noise Floor[2] = ", noisefloor[1]);

        nf = ((rsp[5]>>23) & 0x1ff);
        if ((nf & 0x100) != 0x0)
        {
            noisefloor[2] = 0 - ((nf ^ 0x1ff) + 1);
        }
        else
        {
            noisefloor[2] = nf;
        }

        //zm_debug_msg1("Noise Floor ext[1] = ", noisefloor[2]);

        nf = ((rsp[6]>>23) & 0x1ff);
        if ((nf & 0x100) != 0x0)
        {
            noisefloor[3] = 0 - ((nf ^ 0x1ff) + 1);
        }
        else
        {
            noisefloor[3] = nf;
        }

        //zm_debug_msg1("Noise Floor ext[2] = ", noisefloor[3]);

        //zm_debug_msg1("Is Site Survey = ", hpPriv->isSiteSurvey);
        #endif
    }
    else if (src == ZM_CMD_SET_KEY)
    {
        zfCoreSetKeyComplete(dev);
    }
    else if (src == ZM_CWM_READ)
    {
        zm_msg2_mm(ZM_LV_0, "CWM rsp[1]=", rsp[1]);
        zm_msg2_mm(ZM_LV_0, "CWM rsp[2]=", rsp[2]);
        zfCoreCwmBusy(dev, zfCwmIsExtChanBusy(rsp[1], rsp[2]));
    }
    else if (src == ZM_MAC_READ)
    {
        /* rsp[1] = ZM_SEEPROM_MAC_ADDRESS_OFFSET;   */
        /* rsp[2] = ZM_SEEPROM_MAC_ADDRESS_OFFSET+4; */
        /* rsp[3] = ZM_SEEPROM_REGDOMAIN_OFFSET;     */
        /* rsp[4] = ZM_SEEPROM_VERISON_OFFSET;       */
        /* rsp[5] = ZM_SEEPROM_HARDWARE_TYPE_OFFSET; */
        /* rsp[6] = ZM_SEEPROM_HW_HEAVY_CLIP;        */

        u8_t addr[6], CCS, WWR;
        u16_t CountryDomainCode;

        /* BB heavy clip */
        //hpPriv->eepromHeavyClipFlag = (u8_t)((rsp[6]>>24) & 0xff); // force enable 8107
        //zm_msg2_mm(ZM_LV_0, "eepromHeavyClipFlag", hpPriv->eepromHeavyClipFlag);
        #if 0
        if (hpPriv->hwBBHeavyClip)
        {
            zm_msg0_mm(ZM_LV_0, "enable BB Heavy Clip");
        }
        else
        {
            zm_msg0_mm(ZM_LV_0, "Not enable BB Heavy Clip");
        }
        #endif
        zm_msg2_mm(ZM_LV_0, "MAC rsp[1]=", rsp[1]);
        zm_msg2_mm(ZM_LV_0, "MAC rsp[2]=", rsp[2]);

        addr[0] = (u8_t)(rsp[1] & 0xff);
        addr[1] = (u8_t)((rsp[1]>>8) & 0xff);
        addr[2] = (u8_t)((rsp[1]>>16) & 0xff);
        addr[3] = (u8_t)((rsp[1]>>24) & 0xff);
        addr[4] = (u8_t)(rsp[2] & 0xff);
        addr[5] = (u8_t)((rsp[2]>>8) & 0xff);
/*#ifdef ZM_FB50
        addr[0] = (u8_t)(0 & 0xff);
        addr[1] = (u8_t)(3 & 0xff);
        addr[2] = (u8_t)(127 & 0xff);
        addr[3] = (u8_t)(0 & 0xff);
        addr[4] = (u8_t)(9 & 0xff);
        addr[5] = (u8_t)(11 & 0xff);
#endif*/

        zfDelayWriteInternalReg(dev, ZM_MAC_REG_MAC_ADDR_L,
                ((((u32_t)addr[3])<<24) | (((u32_t)addr[2])<<16) | (((u32_t)addr[1])<<8) | addr[0]));
        zfDelayWriteInternalReg(dev, ZM_MAC_REG_MAC_ADDR_H,
                ((((u32_t)addr[5])<<8) | addr[4]));
        zfFlushDelayWrite(dev);

        wd->ledStruct.ledMode[0] = (u16_t)(rsp[5]&0xffff);
        wd->ledStruct.ledMode[1] = (u16_t)(rsp[5]>>16);
        zm_msg2_mm(ZM_LV_0, "ledMode[0]=", wd->ledStruct.ledMode[0]);
        zm_msg2_mm(ZM_LV_0, "ledMode[1]=", wd->ledStruct.ledMode[1]);

        /* Regulatory Related Setting */
        zm_msg2_mm(ZM_LV_0, "RegDomain rsp=", rsp[3]);
        zm_msg2_mm(ZM_LV_0, "OpFlags+EepMisc=", rsp[4]);
        hpPriv->OpFlags = (u8_t)((rsp[4]>>16) & 0xff);
        if ((rsp[2] >> 24) == 0x1) //Tx mask == 0x1
        {
            zm_msg0_mm(ZM_LV_0, "OTUS 1x2");
            hpPriv->halCapability |= ZM_HP_CAP_11N_ONE_TX_STREAM;
        }
        else
        {
            zm_msg0_mm(ZM_LV_0, "OTUS 2x2");
        }
        if (hpPriv->OpFlags & 0x1)
        {
            hpPriv->halCapability |= ZM_HP_CAP_5G;
        }
        if (hpPriv->OpFlags & 0x2)
        {
            hpPriv->halCapability |= ZM_HP_CAP_2G;
        }


        CCS = (u8_t)((rsp[3] & 0x8000) >> 15);
        WWR = (u8_t)((rsp[3] & 0x4000) >> 14);
        CountryDomainCode = (u16_t)(rsp[3] & 0x3FFF);

        if (rsp[3] != 0xffffffff)
        {
            if (CCS)
            {
                //zm_debug_msg0("CWY - Get Regulation Table from Country Code");
                zfHpGetRegulationTablefromCountry(dev, CountryDomainCode);
            }
            else
            {
                //zm_debug_msg0("CWY - Get Regulation Table from Reg Domain");
                zfHpGetRegulationTablefromRegionCode(dev, CountryDomainCode);
            }
            if (WWR)
            {
                //zm_debug_msg0("CWY - Enable 802.11d");
                /* below line shall be unmarked after A band is ready */
                //zfiWlanSetDot11DMode(dev, 1);
            }
        }
        else
        {
            zfHpGetRegulationTablefromRegionCode(dev, NO_ENUMRD);
        }

        zfCoreMacAddressNotify(dev, addr);

    }
    else if (src == ZM_EEPROM_READ)
    {
#if 0
        u8_t addr[6], CCS, WWR;
        u16_t CountryDomainCode;
#endif
        for (i=0; i<ZM_HAL_MAX_EEPROM_PRQ; i++)
        {
            if (hpPriv->eepromImageIndex < 1024)
            {
                hpPriv->eepromImage[hpPriv->eepromImageIndex++] = rsp[i+1];
            }
        }

        if (hpPriv->eepromImageIndex == (ZM_HAL_MAX_EEPROM_REQ*ZM_HAL_MAX_EEPROM_PRQ))
        {
            #if 0
            for (i=0; i<1024; i++)
            {
                zm_msg2_mm(ZM_LV_0, "index=", i);
                zm_msg2_mm(ZM_LV_0, "eepromImage=", hpPriv->eepromImage[i]);
            }
            #endif
            zm_msg2_mm(ZM_LV_0, "MAC [1]=", hpPriv->eepromImage[0x20c/4]);
            zm_msg2_mm(ZM_LV_0, "MAC [2]=", hpPriv->eepromImage[0x210/4]);
#if 0
            addr[0] = (u8_t)(hpPriv->eepromImage[0x20c/4] & 0xff);
            addr[1] = (u8_t)((hpPriv->eepromImage[0x20c/4]>>8) & 0xff);
            addr[2] = (u8_t)((hpPriv->eepromImage[0x20c/4]>>16) & 0xff);
            addr[3] = (u8_t)((hpPriv->eepromImage[0x20c/4]>>24) & 0xff);
            addr[4] = (u8_t)(hpPriv->eepromImage[0x210/4] & 0xff);
            addr[5] = (u8_t)((hpPriv->eepromImage[0x210/4]>>8) & 0xff);

            zfCoreMacAddressNotify(dev, addr);

            zfDelayWriteInternalReg(dev, ZM_MAC_REG_MAC_ADDR_L,
                    ((((u32_t)addr[3])<<24) | (((u32_t)addr[2])<<16) | (((u32_t)addr[1])<<8) | addr[0]));
            zfDelayWriteInternalReg(dev, ZM_MAC_REG_MAC_ADDR_H,
                    ((((u32_t)addr[5])<<8) | addr[4]));
            zfFlushDelayWrite(dev);

            /* Regulatory Related Setting */
            zm_msg2_mm(ZM_LV_0, "RegDomain =", hpPriv->eepromImage[0x208/4]);
            CCS = (u8_t)((hpPriv->eepromImage[0x208/4] & 0x8000) >> 15);
            WWR = (u8_t)((hpPriv->eepromImage[0x208/4] & 0x4000) >> 14);
            /* below line shall be unmarked after A band is ready */
            //CountryDomainCode = (u16_t)(hpPriv->eepromImage[0x208/4] & 0x3FFF);
            CountryDomainCode = 8;
            if (CCS)
            {
                //zm_debug_msg0("CWY - Get Regulation Table from Country Code");
                zfHpGetRegulationTablefromCountry(dev, CountryDomainCode);
            }
            else
            {
                //zm_debug_msg0("CWY - Get Regulation Table from Reg Domain");
                zfHpGetRegulationTablefromRegionCode(dev, CountryDomainCode);
            }
            if (WWR)
            {
                //zm_debug_msg0("CWY - Enable 802.11d");
                /* below line shall be unmarked after A band is ready */
                //zfiWlanSetDot11DMode(dev, 1);
            }
#endif
            zfCoreHalInitComplete(dev);
        }
        else
        {
            hpPriv->eepromImageRdReq++;
            zfHpLoadEEPROMFromFW(dev);
        }
    }
    else if (src == ZM_EEPROM_WRITE)
    {
        zfwDbgWriteEepromDone(dev, cmd[1], cmd[2]);
    }
    else if (src == ZM_ANI_READ)
    {
        u32_t cycleTime, ctlClear;

        zm_msg2_mm(ZM_LV_0, "ANI rsp[1]=", rsp[1]);
        zm_msg2_mm(ZM_LV_0, "ANI rsp[2]=", rsp[2]);
        zm_msg2_mm(ZM_LV_0, "ANI rsp[3]=", rsp[3]);
        zm_msg2_mm(ZM_LV_0, "ANI rsp[4]=", rsp[4]);

        hpPriv->ctlBusy += rsp[1];
        hpPriv->extBusy += rsp[2];

        cycleTime = 100000; //100 miniseconds

        if (cycleTime > rsp[1])
        {
            ctlClear = (cycleTime - rsp[1]) / 100;
        }
        else
        {
            ctlClear = 0;
        }
        if (wd->aniEnable)
            zfHpAniArPoll(dev, ctlClear, rsp[3], rsp[4]);
    }
    else if (src == ZM_CMD_ECHO)
    {
        if ( ((struct zsHpPriv*)wd->hpPrivate)->halReInit )
        {
            zfCoreHalInitComplete(dev);
            ((struct zsHpPriv*)wd->hpPrivate)->halReInit = 0;
        }
        else
        {
            zfHpLoadEEPROMFromFW(dev);
        }
    }
    else if (src == ZM_OID_FW_DL_INIT)
    {
        zfwDbgDownloadFwInitDone(dev);
    }
    return;
}


/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfWriteRegInternalReg       */
/*      Write on chip internal register immediately.                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      val : value                                                     */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Stephen Chen        ZyDAS Technology Corporation    2005.11     */
/*                                                                      */
/************************************************************************/
u32_t zfWriteRegInternalReg(zdev_t* dev, u32_t addr, u32_t val)
{
    u32_t cmd[3];
    u16_t ret;

    cmd[0] = 0x00000108;
    cmd[1] = addr;
    cmd[2] = val;

    ret = zfIssueCmd(dev, cmd, 12, ZM_OID_INTERNAL_WRITE, NULL);
    return ret;
}


/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfDelayWriteInternalReg     */
/*      Write on chip internal register, write operation may be         */
/*      postponed to form a multiple write command.                     */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      val : value                                                     */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : command been postponed                                      */
/*      1 : commands been executed                                      */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Stephen Chen        ZyDAS Technology Corporation    2005.11     */
/*                                                                      */
/************************************************************************/
u16_t zfDelayWriteInternalReg(zdev_t* dev, u32_t addr, u32_t val)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u16_t i;
    u16_t ret;
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    zmw_declare_for_critical_section();

    /* enter critical section */
    zmw_enter_critical_section(dev);

    /* Store command to global buffer */
    hpPriv->cmd.delayWcmdAddr[hpPriv->cmd.delayWcmdCount] = addr;
    hpPriv->cmd.delayWcmdVal[hpPriv->cmd.delayWcmdCount++] = val;

    /* If pending command reach size limit */
    if ((hpPriv->cmd.delayWcmdCount) >= ((ZM_MAX_CMD_SIZE - 4) >> 3))
    {
        cmd[0] = 0x00000100 + (hpPriv->cmd.delayWcmdCount<<3);

        /* copy command to cmd buffer */
        for (i=0; i<hpPriv->cmd.delayWcmdCount; i++)
        {
            cmd[1+(i<<1)] = hpPriv->cmd.delayWcmdAddr[i];
            cmd[2+(i<<1)] = hpPriv->cmd.delayWcmdVal[i];
        }
        /* reset pending command */
        hpPriv->cmd.delayWcmdCount = 0;

        /* leave critical section */
        zmw_leave_critical_section(dev);

        /* issue write command */
        ret = zfIssueCmd(dev, cmd, 4+(i<<3), ZM_OID_INTERNAL_WRITE, NULL);

        return 1;
    }
    else
    {
        /* leave critical section */
        zmw_leave_critical_section(dev);

        return 0;
    }
}


/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfFlushDelayWrite           */
/*      Flush pending write command.                                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : no pending command                                          */
/*      1 : commands been executed                                      */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Stephen Chen        ZyDAS Technology Corporation    2005.11     */
/*                                                                      */
/************************************************************************/
u16_t zfFlushDelayWrite(zdev_t* dev)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u16_t i;
    u16_t ret;
    struct zsHpPriv* hpPriv;

    zmw_get_wlan_dev(dev);
    hpPriv=wd->hpPrivate;

    zmw_declare_for_critical_section();

    /* enter critical section */
    zmw_enter_critical_section(dev);

    /* If there is pending command */
    if (hpPriv->cmd.delayWcmdCount > 0)
    {
        cmd[0] = 0x00000100 + (hpPriv->cmd.delayWcmdCount<<3);

        /* copy command to cmd buffer */
        for (i=0; i<hpPriv->cmd.delayWcmdCount; i++)
        {
            cmd[1+(i<<1)] = hpPriv->cmd.delayWcmdAddr[i];
            cmd[2+(i<<1)] = hpPriv->cmd.delayWcmdVal[i];
        }
        /* reset pending command */
        hpPriv->cmd.delayWcmdCount = 0;

        /* leave critical section */
        zmw_leave_critical_section(dev);

        /* issue write command */
        ret = zfIssueCmd(dev, cmd, 4+(i<<3), ZM_OID_INTERNAL_WRITE, NULL);

        return 1;
    }
    else
    {
        /* leave critical section */
        zmw_leave_critical_section(dev);

        return 0;
    }
}


u32_t zfiDbgDelayWriteReg(zdev_t* dev, u32_t addr, u32_t val)
{
	zfDelayWriteInternalReg(dev, addr, val);
	return 0;
}

u32_t zfiDbgFlushDelayWrite(zdev_t* dev)
{
	zfFlushDelayWrite(dev);
	return 0;
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgWriteReg              */
/*      Write register.                                                 */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      val : value                                                     */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Stephen Chen        ZyDAS Technology Corporation    2005.10     */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgWriteReg(zdev_t* dev, u32_t addr, u32_t val)
{
    u32_t cmd[3];
    u16_t ret;

    cmd[0] = 0x00000108;
    cmd[1] = addr;
    cmd[2] = val;

    ret = zfIssueCmd(dev, cmd, 12, ZM_OID_WRITE, 0);
    return ret;
}
/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgWriteFlash            */
/*      Write flash.                                                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      val : value                                                     */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Yjsung        ZyDAS Technology Corporation    2007.02           */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgWriteFlash(zdev_t* dev, u32_t addr, u32_t val)
{
    u32_t cmd[3];
    u16_t ret;

    //cmd[0] = 0x0000B008;
	/* len[0] : type[0xB0] : seq[?] */
    cmd[0] = 8 | (ZM_CMD_WFLASH << 8);
    cmd[1] = addr;
    cmd[2] = val;

    ret = zfIssueCmd(dev, cmd, 12, ZM_OID_WRITE, 0);
    return ret;
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgWriteEeprom            */
/*      Write EEPROM.                                                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      val : value                                                     */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul        ZyDAS Technology Corporation    2007.06             */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgWriteEeprom(zdev_t* dev, u32_t addr, u32_t val)
{
    u32_t cmd[3];
    u16_t ret;

    //cmd[0] = 0x0000B008;
	/* len[0] : type[0xB0] : seq[?] */
    cmd[0] = 8 | (ZM_CMD_WREEPROM << 8);
    cmd[1] = addr;
    cmd[2] = val;

    ret = zfIssueCmd(dev, cmd, 12, ZM_EEPROM_WRITE, 0);
    return ret;
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgBlockWriteEeprom      */
/*      Block Write Eeprom.                                             */
/*                                                                      */
/*      p.s: now,it will write 16 bytes register data per block (N=4)   */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      buf : input data buffer pointer                                 */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul        ZyDAS Technology Corporation    2007.06             */
/*                                                                      */
/************************************************************************/
//#define N       buflen/4
//#define SIZE    (2*N+1)

u32_t zfiDbgBlockWriteEeprom(zdev_t* dev, u32_t addr, u32_t* buf)
{
    u32_t cmd[9];  //2N+1
    u16_t ret,i;

    //cmd[0] = 0x0000B008;
	  /* len[0] : type[0xB0] : seq[?] */

    //cmd[0] = (8*N) | (ZM_CMD_WFLASH << 8);
    cmd[0] = 32 | (ZM_CMD_WREEPROM << 8);    //8N

    for (i=0; i<4; i++)   // i<N
    {
        cmd[(2*i)+1] = addr+(4*i);
        cmd[(2*i)+2] = *(buf+i);
    }

    ret = zfIssueCmd(dev, cmd, 36, ZM_EEPROM_WRITE, 0);    //8N+4

    // added for EEPROMUpdate, wait a moment for prevent cmd queue full!
    //zfwSleep(dev, 1);

    return ret;
}


/* write EEPROM with wrlen : wrlen must be 4*n */
/* command format : cmd_info(4) + addr(4) + eeprom(wrlen) */
u32_t zfiDbgBlockWriteEeprom_v2(zdev_t* dev, u32_t addr, u32_t* buf, u32_t wrlen)
{
    u32_t cmd[16];
    u16_t ret,i;

	  /* len[0] : type[0xB0] : seq[?] */
	  /* len = addr(4) + eeprom_block(wrlen) */
    cmd[0] = (wrlen+4) | (ZM_CMD_MEM_WREEPROM << 8);
    cmd[1] = addr;

    for (i=0; i<(wrlen/4); i++)   // i<wrlen/4
    {
        cmd[2+i] = *(buf+i);
    }
    /* cmd_info(4) + addr(4) + eeprom(wrlen) */
    ret = zfIssueCmd(dev, cmd, (u16_t)(wrlen+8), ZM_EEPROM_WRITE, 0);

    return ret;
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfDbgOpenEeprom            */
/*      Open EEPROM.                                                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                ZyDAS Technology Corporation    2007.06     */
/*                                                                      */
/************************************************************************/
void zfDbgOpenEeprom(zdev_t* dev)
{
    // unlock EEPROM
    zfDelayWriteInternalReg(dev, 0x1D1400, 0x12345678);
    zfDelayWriteInternalReg(dev, 0x1D1404, 0x55aa00ff);
    zfDelayWriteInternalReg(dev, 0x1D1408, 0x13579ace);
    zfDelayWriteInternalReg(dev, 0x1D1414, 0x0);
    zfFlushDelayWrite(dev);
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfDbgCloseEeprom            */
/*      Close EEPROM.                                                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                ZyDAS Technology Corporation    2007.05     */
/*                                                                      */
/************************************************************************/
void zfDbgCloseEeprom(zdev_t* dev)
{
    // lock EEPROM
    zfDelayWriteInternalReg(dev, 0x1D1400, 0x87654321);
    //zfDelayWriteInternalReg(dev, 0x1D1404, 0xffffffff);
    //zfDelayWriteInternalReg(dev, 0x1D1408, 0xffffffff);
    //zfDelayWriteInternalReg(dev, 0x1D1414, 0x100);
    zfFlushDelayWrite(dev);
}
#if 0
/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiSeriallyWriteEeprom      */
/*      Write EEPROM Serially.                                          */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : start address of writing EEPROM                          */
/*      buf : input data buffer                                         */
/*      buflen : size of input data buffer                              */
/*               (length of data write into EEPROM)                     */
/*                                                                      */
/*    OUTPUTS                                                           */
/*                                                                      */
/*                                                                      */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                ZyDAS Technology Corporation    2007.06     */
/*                                                                      */
/************************************************************************/
u32_t zfiSeriallyWriteEeprom(zdev_t* dev, u32_t addr, u32_t* buf, u32_t buflen)
{
    u32_t count;
    u16_t i,ret,blocksize;
    u8_t  temp[2];

    // per 4 bytes = 1 count
    count = buflen/4;

    // Open EEPROM
    zfDbgOpenEeprom(dev);

    // Write EEPROM
    for (i=0; i<count; i++)
    {
        if (zfwWriteEeprom(dev, (addr+(4*i)), *(buf+i), 0) != 0)
        {
            // Update failed, Close EEPROM
            zm_debug_msg0("zfwWriteEeprom failed \n");
            zfDbgCloseEeprom(dev);
            return 1;
        }
    }

    // Close EEPROM
    zfDbgCloseEeprom(dev);
    return 0;
}
#endif
#if 0
/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiSeriallyBlockWriteEeprom */
/*       Block Write EEPROM Serially.                                   */
/*      (BlockWrite: per 16bytes write EEPROM once)                     */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*      buf : input data buffer                                         */
/*      buflen : access data size of buf                                */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                ZyDAS Technology Corporation    2007.05     */
/*                                                                      */
/************************************************************************/
u32_t zfiSeriallyBlockWriteEeprom(zdev_t* dev, u32_t addr, u32_t* buf, u32_t buflen)
{
    u32_t count;
    u16_t i,ret,blocksize;
    u8_t  temp[2];

    // per 4 bytes = 1 count
    count = buflen/4;

    // Open EEPROM
    zfDbgOpenEeprom(dev);

    // Write EEPROM
    // EEPROM Write start address from: 0x1000!?
    // per 16bytes(N=4) block write EEPROM once
    for (i=0; i<(count/4); i++)   // count/N
    {
        //zfiDbgBlockWriteEeprom(dev, (addr+(4*N*i)), buf+(N*i));
        //zfiDbgBlockWriteEeprom(dev, (addr+(16*i)), buf+(4*i));
        if (zfwBlockWriteEeprom(dev, (addr+(16*i)), buf+(4*i), 0) != 0)
        {
            zm_debug_msg0("zfiDbgBlockWriteEeprom failed \n");
            // Close EEPROM
            zfDbgCloseEeprom(dev);
            return 1;
        }
    }

    // Close EEPROM
    zfDbgCloseEeprom(dev);
    return 0;
}
#endif
#if 0
/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgDumpEeprom            */
/*      Dump EEPROM.                                                    */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : start address of dumping EEPROM                          */
/*      datalen :  length of access EEPROM data                           */
/*      buf :  point of buffer, the buffer saved dump data              */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                ZyDAS Technology Corporation    2007.06     */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgDumpEeprom(zdev_t* dev, u32_t addr, u32_t datalen, u32_t* buf)
{
    u32_t count;
    u16_t i,ret;

    count = datalen/4;

    // over EEPROM length
    if(datalen > 0x2000)
    {
        return 1;
    }

    for(i=0; i<count; i++)
    {
        buf[i] = zfwReadEeprom(dev, addr+(4*i));
    }

    return 0;
}
#endif
/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgReadReg               */
/*      Read register.                                                  */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : register address                                         */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Stephen Chen        ZyDAS Technology Corporation    2005.10     */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgReadReg(zdev_t* dev, u32_t addr)
{
    u32_t cmd[2];
    u16_t ret;

    cmd[0] = 0x00000004;
    cmd[1] = addr;

    ret = zfIssueCmd(dev, cmd, 8, ZM_OID_READ, 0);
    return ret;
}


/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgReadTally             */
/*      Read register.                                                  */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Stephen Chen        ZyDAS Technology Corporation    2005.10     */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgReadTally(zdev_t* dev)
{
    u32_t cmd[1];
    u16_t ret;
	zmw_get_wlan_dev(dev);

	if ( ((struct zsHpPriv*)wd->hpPrivate)->halReInit )
	{
	    return 1;
	}

	/* len[0] : type[0x81] : seq[?] */
    cmd[0] = 0 | (ZM_CMD_TALLY << 8);
    ret = zfIssueCmd(dev, cmd, 4, ZM_OID_TALLY, 0);

	/* len[0] : type[0x82] : seq[?] */
    cmd[0] = 0 | (ZM_CMD_TALLY_APD << 8);
    ret = zfIssueCmd(dev, cmd, 4, ZM_OID_TALLY_APD, 0);

    return ret;
}


u32_t zfiDbgSetIFSynthesizer(zdev_t* dev, u32_t value)
{
    u32_t cmd[2];
    u16_t ret;

	/* len[4] : type[0x32] : seq[?] */
    cmd[0] = 0x4 | (ZM_OID_SYNTH << 8);
    cmd[1] = value;

    ret = zfIssueCmd(dev, cmd, 8, ZM_OID_SYNTH, 0);
    return ret;
}

u32_t zfiDbgQueryHwTxBusy(zdev_t* dev)
{
    u32_t cmd[1];
    u16_t ret;

	/* len[4] : type[0xC0] : seq[?] */
	cmd[0] = 0 | (ZM_CMD_DKTX_STATUS << 8);

    ret = zfIssueCmd(dev, cmd, 4, ZM_OID_DKTX_STATUS, 0);
    return ret;
}

//Paul++
#if 0
u16_t zfHpBlockEraseFlash(zdev_t *dev, u32_t addr)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u16_t ret;

    cmd[0] = 0x00000004 | (ZM_CMD_FLASH_ERASE << 8);
    cmd[1] = addr;

    ret = zfIssueCmd(dev, cmd, 8, ZM_OID_INTERNAL_WRITE, NULL);
    return ret;
}
#endif

#if 0
u16_t zfiDbgProgramFlash(zdev_t *dev, u32_t offset, u32_t len, u32_t *data)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u16_t ret;
    u16_t i;


    cmd[0] = (ZM_CMD_FLASH_PROG << 8) | ((len+8) & 0xff);
    cmd[1] = offset;
    cmd[2] = len;

    for (i = 0; i < (len >> 2); i++)
    {
         cmd[3+i] = data[i];
    }

    ret = zfIssueCmd(dev, cmd, 12, ZM_OID_FLASH_PROGRAM, NULL);

    return ret;
}
#endif

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgChipEraseFlash        */
/*      Chip Erase Flash.                                               */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                Atheros Technology Corporation    2007.09   */
/*                                                                      */
/************************************************************************/
u16_t zfiDbgChipEraseFlash(zdev_t *dev)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u16_t ret;

    cmd[0] = 0x00000000 | (ZM_CMD_FLASH_ERASE << 8);

    ret = zfIssueCmd(dev, cmd, 4, ZM_OID_INTERNAL_WRITE, NULL);
    return ret;
}
/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgGetFlashCheckSum      */
/*      Get FlashCheckSum.                                              */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : Start address of getchksum                               */
/*      len : total lenth of calculate getchksum                        */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                Atheros Technology Corporation    2007.08   */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgGetFlashCheckSum(zdev_t *dev, u32_t addr, u32_t len)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u32_t ret;

    cmd[0] = 0x00000008 | (ZM_CMD_FLASH_CHKSUM << 8);
    cmd[1] = addr;
    cmd[2] = len;

    ret = zfIssueCmd(dev, cmd, 12, ZM_OID_FLASH_CHKSUM, NULL);

    return ret;
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDbgReadFlash             */
/*      Read Flash.                                                     */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*      addr : Start address of read flash                              */
/*      len : total lenth of read flash data                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                Atheros Technology Corporation    2007.09   */
/*                                                                      */
/************************************************************************/
u32_t zfiDbgReadFlash(zdev_t *dev, u32_t addr, u32_t len)
{
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u32_t ret;

    cmd[0] = len | (ZM_CMD_FLASH_READ << 8);
    cmd[1] = addr;

    ret = zfIssueCmd(dev, cmd, 8, ZM_OID_FLASH_READ, NULL);
    return ret;
}

/************************************************************************/
/*                                                                      */
/*    FUNCTION DESCRIPTION                  zfiDownloadFwSet            */
/*      Before Download FW,                                             */
/*      Command FW to Software reset and close watch dog control.       */
/*                                                                      */
/*                                                                      */
/*    INPUTS                                                            */
/*      dev : device pointer                                            */
/*                                                                      */
/*    OUTPUTS                                                           */
/*      0 : success                                                     */
/*      other : fail                                                    */
/*                                                                      */
/*    AUTHOR                                                            */
/*      Paul                Atheros Technology Corporation    2007.09   */
/*                                                                      */
/************************************************************************/
u32_t zfiDownloadFwSet(zdev_t *dev)
{
//softwarereset
//close watch dog
    u32_t cmd[(ZM_MAX_CMD_SIZE/4)];
    u32_t ret;

    cmd[0] = 0x00000008 | (ZM_CMD_FW_DL_INIT << 8);

    ret = zfIssueCmd(dev, cmd, 12, ZM_OID_FW_DL_INIT, NULL);

    return ret;
}
//Paul--