/*
 * Combined Ethernet driver for Motorola MPC8xx and MPC82xx.
 *
 * Copyright (c) 2003 Intracom S.A. 
 *  by Pantelis Antoniou <panto@intracom.gr>
 * 
 * 2005 (c) MontaVista Software, Inc. 
 * Vitaly Bordug <vbordug@ru.mvista.com>
 *
 * This file is licensed under the terms of the GNU General Public License 
 * version 2. This program is licensed "as is" without any warranty of any 
 * kind, whether express or implied.
 */


#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
#include <linux/ptrace.h>
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/bitops.h>

#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/uaccess.h>

#include "fs_enet.h"

#ifdef CONFIG_8xx
static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
{
	immap_t *im = (immap_t *)fs_enet_immap;
	void *dir, *dat, *ppar;
	int adv;
	u8 msk;

	switch (port) {
		case fsiop_porta:
			dir = &im->im_ioport.iop_padir;
			dat = &im->im_ioport.iop_padat;
			ppar = &im->im_ioport.iop_papar;
			break;

		case fsiop_portb:
			dir = &im->im_cpm.cp_pbdir;
			dat = &im->im_cpm.cp_pbdat;
			ppar = &im->im_cpm.cp_pbpar;
			break;

		case fsiop_portc:
			dir = &im->im_ioport.iop_pcdir;
			dat = &im->im_ioport.iop_pcdat;
			ppar = &im->im_ioport.iop_pcpar;
			break;

		case fsiop_portd:
			dir = &im->im_ioport.iop_pddir;
			dat = &im->im_ioport.iop_pddat;
			ppar = &im->im_ioport.iop_pdpar;
			break;

		case fsiop_porte:
			dir = &im->im_cpm.cp_pedir;
			dat = &im->im_cpm.cp_pedat;
			ppar = &im->im_cpm.cp_pepar;
			break;

		default:
			printk(KERN_ERR DRV_MODULE_NAME
			       "Illegal port value %d!\n", port);
			return -EINVAL;
	}

	adv = bit >> 3;
	dir = (char *)dir + adv;
	dat = (char *)dat + adv;
	ppar = (char *)ppar + adv;

	msk = 1 << (7 - (bit & 7));
	if ((in_8(ppar) & msk) != 0) {
		printk(KERN_ERR DRV_MODULE_NAME
		       "pin %d on port %d is not general purpose!\n", bit, port);
		return -EINVAL;
	}

	*dirp = dir;
	*datp = dat;
	*mskp = msk;

	return 0;
}
#endif

#ifdef CONFIG_8260
static int bitbang_prep_bit(u8 **dirp, u8 **datp, u8 *mskp, int port, int bit)
{
	iop_cpm2_t *io = &((cpm2_map_t *)fs_enet_immap)->im_ioport;
	void *dir, *dat, *ppar;
	int adv;
	u8 msk;

	switch (port) {
		case fsiop_porta:
			dir = &io->iop_pdira;
			dat = &io->iop_pdata;
			ppar = &io->iop_ppara;
			break;

		case fsiop_portb:
			dir = &io->iop_pdirb;
			dat = &io->iop_pdatb;
			ppar = &io->iop_pparb;
			break;

		case fsiop_portc:
			dir = &io->iop_pdirc;
			dat = &io->iop_pdatc;
			ppar = &io->iop_pparc;
			break;

		case fsiop_portd:
			dir = &io->iop_pdird;
			dat = &io->iop_pdatd;
			ppar = &io->iop_ppard;
			break;

		default:
			printk(KERN_ERR DRV_MODULE_NAME
			       "Illegal port value %d!\n", port);
			return -EINVAL;
	}

	adv = bit >> 3;
	dir = (char *)dir + adv;
	dat = (char *)dat + adv;
	ppar = (char *)ppar + adv;

	msk = 1 << (7 - (bit & 7));
	if ((in_8(ppar) & msk) != 0) {
		printk(KERN_ERR DRV_MODULE_NAME
		       "pin %d on port %d is not general purpose!\n", bit, port);
		return -EINVAL;
	}

	*dirp = dir;
	*datp = dat;
	*mskp = msk;

	return 0;
}
#endif

static inline void bb_set(u8 *p, u8 m)
{
	out_8(p, in_8(p) | m);
}

static inline void bb_clr(u8 *p, u8 m)
{
	out_8(p, in_8(p) & ~m);
}

static inline int bb_read(u8 *p, u8 m)
{
	return (in_8(p) & m) != 0;
}

static inline void mdio_active(struct fs_enet_mii_bus *bus)
{
	bb_set(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
}

static inline void mdio_tristate(struct fs_enet_mii_bus *bus)
{
	bb_clr(bus->bitbang.mdio_dir, bus->bitbang.mdio_msk);
}

static inline int mdio_read(struct fs_enet_mii_bus *bus)
{
	return bb_read(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
}

static inline void mdio(struct fs_enet_mii_bus *bus, int what)
{
	if (what)
		bb_set(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
	else
		bb_clr(bus->bitbang.mdio_dat, bus->bitbang.mdio_msk);
}

static inline void mdc(struct fs_enet_mii_bus *bus, int what)
{
	if (what)
		bb_set(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
	else
		bb_clr(bus->bitbang.mdc_dat, bus->bitbang.mdc_msk);
}

static inline void mii_delay(struct fs_enet_mii_bus *bus)
{
	udelay(bus->bus_info->i.bitbang.delay);
}

/* Utility to send the preamble, address, and register (common to read and write). */
static void bitbang_pre(struct fs_enet_mii_bus *bus, int read, u8 addr, u8 reg)
{
	int j;

	/*
	 * Send a 32 bit preamble ('1's) with an extra '1' bit for good measure.
	 * The IEEE spec says this is a PHY optional requirement.  The AMD
	 * 79C874 requires one after power up and one after a MII communications
	 * error.  This means that we are doing more preambles than we need,
	 * but it is safer and will be much more robust.
	 */

	mdio_active(bus);
	mdio(bus, 1);
	for (j = 0; j < 32; j++) {
		mdc(bus, 0);
		mii_delay(bus);
		mdc(bus, 1);
		mii_delay(bus);
	}

	/* send the start bit (01) and the read opcode (10) or write (10) */
	mdc(bus, 0);
	mdio(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, 1);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, read);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, !read);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	/* send the PHY address */
	for (j = 0; j < 5; j++) {
		mdc(bus, 0);
		mdio(bus, (addr & 0x10) != 0);
		mii_delay(bus);
		mdc(bus, 1);
		mii_delay(bus);
		addr <<= 1;
	}

	/* send the register address */
	for (j = 0; j < 5; j++) {
		mdc(bus, 0);
		mdio(bus, (reg & 0x10) != 0);
		mii_delay(bus);
		mdc(bus, 1);
		mii_delay(bus);
		reg <<= 1;
	}
}

static int mii_read(struct fs_enet_mii_bus *bus, int phy_id, int location)
{
	u16 rdreg;
	int ret, j;
	u8 addr = phy_id & 0xff;
	u8 reg = location & 0xff;

	bitbang_pre(bus, 1, addr, reg);

	/* tri-state our MDIO I/O pin so we can read */
	mdc(bus, 0);
	mdio_tristate(bus);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	/* check the turnaround bit: the PHY should be driving it to zero */
	if (mdio_read(bus) != 0) {
		/* PHY didn't drive TA low */
		for (j = 0; j < 32; j++) {
			mdc(bus, 0);
			mii_delay(bus);
			mdc(bus, 1);
			mii_delay(bus);
		}
		ret = -1;
		goto out;
	}

	mdc(bus, 0);
	mii_delay(bus);

	/* read 16 bits of register data, MSB first */
	rdreg = 0;
	for (j = 0; j < 16; j++) {
		mdc(bus, 1);
		mii_delay(bus);
		rdreg <<= 1;
		rdreg |= mdio_read(bus);
		mdc(bus, 0);
		mii_delay(bus);
	}

	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	ret = rdreg;
out:
	return ret;
}

static void mii_write(struct fs_enet_mii_bus *bus, int phy_id, int location, int val)
{
	int j;
	u8 addr = phy_id & 0xff;
	u8 reg = location & 0xff;
	u16 value = val & 0xffff;

	bitbang_pre(bus, 0, addr, reg);

	/* send the turnaround (10) */
	mdc(bus, 0);
	mdio(bus, 1);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
	mdc(bus, 0);
	mdio(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);

	/* write 16 bits of register data, MSB first */
	for (j = 0; j < 16; j++) {
		mdc(bus, 0);
		mdio(bus, (value & 0x8000) != 0);
		mii_delay(bus);
		mdc(bus, 1);
		mii_delay(bus);
		value <<= 1;
	}

	/*
	 * Tri-state the MDIO line.
	 */
	mdio_tristate(bus);
	mdc(bus, 0);
	mii_delay(bus);
	mdc(bus, 1);
	mii_delay(bus);
}

int fs_mii_bitbang_init(struct fs_enet_mii_bus *bus)
{
	const struct fs_mii_bus_info *bi = bus->bus_info;
	int r;

	r = bitbang_prep_bit(&bus->bitbang.mdio_dir,
			 &bus->bitbang.mdio_dat,
			 &bus->bitbang.mdio_msk,
			 bi->i.bitbang.mdio_port,
			 bi->i.bitbang.mdio_bit);
	if (r != 0)
		return r;

	r = bitbang_prep_bit(&bus->bitbang.mdc_dir,
			 &bus->bitbang.mdc_dat,
			 &bus->bitbang.mdc_msk,
			 bi->i.bitbang.mdc_port,
			 bi->i.bitbang.mdc_bit);
	if (r != 0)
		return r;

	bus->mii_read = mii_read;
	bus->mii_write = mii_write;

	return 0;
}