/*
 *************************************************************************
 * Ralink Tech Inc.
 * 5F., No.36, Taiyuan St., Jhubei City,
 * Hsinchu County 302,
 * Taiwan, R.O.C.
 *
 * (c) Copyright 2002-2007, Ralink Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify  *
 * it under the terms of the GNU General Public License as published by  *
 * the Free Software Foundation; either version 2 of the License, or     *
 * (at your option) any later version.                                   *
 *                                                                       *
 * This program is distributed in the hope that it will be useful,       *
 * but WITHOUT ANY WARRANTY; without even the implied warranty of        *
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
 * GNU General Public License for more details.                          *
 *                                                                       *
 * You should have received a copy of the GNU General Public License     *
 * along with this program; if not, write to the                         *
 * Free Software Foundation, Inc.,                                       *
 * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.             *
 *                                                                       *
 *************************************************************************

 	Module Name:
	rtusb_io.c

	Abstract:

	Revision History:
	Who			When	    What
	--------	----------  ----------------------------------------------
	Name		Date	    Modification logs
	Paul Lin    06-25-2004  created
*/

#include "../rt_config.h"


/*
	========================================================================

	Routine Description: NIC initialization complete

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/

NTSTATUS	RTUSBFirmwareRun(
	IN	PRTMP_ADAPTER	pAd)
{
	NTSTATUS	Status;

	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x01,
		0x8,
		0,
		NULL,
		0);

	return Status;
}


/*
	========================================================================

	Routine Description: Write Firmware to NIC.

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS RTUSBFirmwareWrite(
	IN PRTMP_ADAPTER pAd,
	IN PUCHAR		pFwImage,
	IN ULONG		FwLen)
{
	UINT32		MacReg;
	NTSTATUS 	Status;
//	ULONG 		i;
	USHORT		writeLen;

	Status = RTUSBReadMACRegister(pAd, MAC_CSR0, &MacReg);


	writeLen = FwLen;
	RTUSBMultiWrite(pAd, FIRMWARE_IMAGE_BASE, pFwImage, writeLen);

	Status = RTUSBWriteMACRegister(pAd, 0x7014, 0xffffffff);
	Status = RTUSBWriteMACRegister(pAd, 0x701c, 0xffffffff);
	Status = RTUSBFirmwareRun(pAd);

	return Status;
}


/*
	========================================================================

	Routine Description: Get current firmware operation mode (Return Value)

	Arguments:

	Return Value:
		0 or 1 = Downloaded by host driver
		others = Driver doesn't download firmware

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBFirmwareOpmode(
	IN	PRTMP_ADAPTER	pAd,
	OUT	PUINT32			pValue)
{
	NTSTATUS	Status;

	Status = RTUSB_VendorRequest(
		pAd,
		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
		DEVICE_VENDOR_REQUEST_IN,
		0x1,
		0x11,
		0,
		pValue,
		4);
	return Status;
}
NTSTATUS	RTUSBVenderReset(
	IN	PRTMP_ADAPTER	pAd)
{
	NTSTATUS	Status;
	DBGPRINT_RAW(RT_DEBUG_ERROR, ("-->RTUSBVenderReset\n"));
	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x01,
		0x1,
		0,
		NULL,
		0);

	DBGPRINT_RAW(RT_DEBUG_ERROR, ("<--RTUSBVenderReset\n"));
	return Status;
}
/*
	========================================================================

	Routine Description: Read various length data from RT2573

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBMultiRead(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	OUT	PUCHAR			pData,
	IN	USHORT			length)
{
	NTSTATUS	Status;

	Status = RTUSB_VendorRequest(
		pAd,
		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
		DEVICE_VENDOR_REQUEST_IN,
		0x7,
		0,
		Offset,
		pData,
		length);

	return Status;
}

/*
	========================================================================

	Routine Description: Write various length data to RT2573

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBMultiWrite_OneByte(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	IN	PUCHAR			pData)
{
	NTSTATUS	Status;

	// TODO: In 2870, use this funciton carefully cause it's not stable.
	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x6,
		0,
		Offset,
		pData,
		1);

	return Status;
}

NTSTATUS	RTUSBMultiWrite(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	IN	PUCHAR			pData,
	IN	USHORT			length)
{
	NTSTATUS	Status;


        USHORT          index = 0,Value;
        PUCHAR          pSrc = pData;
        USHORT          resude = 0;

        resude = length % 2;
		length  += resude;
		do
		{
			Value =(USHORT)( *pSrc  | (*(pSrc + 1) << 8));
		Status = RTUSBSingleWrite(pAd,Offset + index,Value);
            index +=2;
            length -= 2;
            pSrc = pSrc + 2;
        }while(length > 0);

	return Status;
}


NTSTATUS RTUSBSingleWrite(
	IN 	RTMP_ADAPTER 	*pAd,
	IN	USHORT			Offset,
	IN	USHORT			Value)
{
	NTSTATUS	Status;

	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x2,
		Value,
		Offset,
		NULL,
		0);

	return Status;

}


/*
	========================================================================

	Routine Description: Read 32-bit MAC register

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBReadMACRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	OUT	PUINT32			pValue)
{
	NTSTATUS	Status;
	UINT32		localVal;

	Status = RTUSB_VendorRequest(
		pAd,
		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
		DEVICE_VENDOR_REQUEST_IN,
		0x7,
		0,
		Offset,
		&localVal,
		4);

	*pValue = le2cpu32(localVal);


	if (Status < 0)
		*pValue = 0xffffffff;

	return Status;
}


/*
	========================================================================

	Routine Description: Write 32-bit MAC register

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBWriteMACRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	IN	UINT32			Value)
{
	NTSTATUS	Status;
	UINT32		localVal;

	localVal = Value;

	Status = RTUSBSingleWrite(pAd, Offset, (USHORT)(localVal & 0xffff));
	Status = RTUSBSingleWrite(pAd, Offset + 2, (USHORT)((localVal & 0xffff0000) >> 16));

	return Status;
}


#if 1
/*
	========================================================================

	Routine Description: Read 8-bit BBP register

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBReadBBPRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Id,
	IN	PUCHAR			pValue)
{
	BBP_CSR_CFG_STRUC	BbpCsr;
	UINT			i = 0;
	NTSTATUS		status;

	// Verify the busy condition
	do
	{
		status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
		if(status >= 0)
		{
		if (!(BbpCsr.field.Busy == BUSY))
			break;
		}
		printk("RTUSBReadBBPRegister(BBP_CSR_CFG_1):retry count=%d!\n", i);
		i++;
	}
	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		//
		// Read failed then Return Default value.
		//
		*pValue = pAd->BbpWriteLatch[Id];

		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
		return STATUS_UNSUCCESSFUL;
	}

	// Prepare for write material
	BbpCsr.word 				= 0;
	BbpCsr.field.fRead			= 1;
	BbpCsr.field.Busy			= 1;
	BbpCsr.field.RegNum 		= Id;
	RTUSBWriteMACRegister(pAd, BBP_CSR_CFG, BbpCsr.word);

	i = 0;
	// Verify the busy condition
	do
	{
		status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
		if (status >= 0)
		{
		if (!(BbpCsr.field.Busy == BUSY))
		{
			*pValue = (UCHAR)BbpCsr.field.Value;
			break;
		}
		}
		printk("RTUSBReadBBPRegister(BBP_CSR_CFG_2):retry count=%d!\n", i);
		i++;
	}
	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		//
		// Read failed then Return Default value.
		//
		*pValue = pAd->BbpWriteLatch[Id];

		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
		return STATUS_UNSUCCESSFUL;
	}

	return STATUS_SUCCESS;
}
#else
/*
	========================================================================

	Routine Description: Read 8-bit BBP register via firmware

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBReadBBPRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Id,
	IN	PUCHAR			pValue)
{
	BBP_CSR_CFG_STRUC	BbpCsr;
	int					i, k;
	for (i=0; i<MAX_BUSY_COUNT; i++)
	{
		RTUSBReadMACRegister(pAd, H2M_BBP_AGENT, &BbpCsr.word);
		if (BbpCsr.field.Busy == BUSY)
		{
			continue;
		}
		BbpCsr.word = 0;
		BbpCsr.field.fRead = 1;
		BbpCsr.field.BBP_RW_MODE = 1;
		BbpCsr.field.Busy = 1;
		BbpCsr.field.RegNum = Id;
		RTUSBWriteMACRegister(pAd, H2M_BBP_AGENT, BbpCsr.word);
		AsicSendCommandToMcu(pAd, 0x80, 0xff, 0x0, 0x0);
		for (k=0; k<MAX_BUSY_COUNT; k++)
		{
			RTUSBReadMACRegister(pAd, H2M_BBP_AGENT, &BbpCsr.word);
			if (BbpCsr.field.Busy == IDLE)
				break;
		}
		if ((BbpCsr.field.Busy == IDLE) &&
			(BbpCsr.field.RegNum == Id))
		{
			*pValue = (UCHAR)BbpCsr.field.Value;
			break;
		}
	}
	if (BbpCsr.field.Busy == BUSY)
	{
		DBGPRINT_ERR(("BBP read R%d=0x%x fail\n", Id, BbpCsr.word));
		*pValue = pAd->BbpWriteLatch[Id];
		return STATUS_UNSUCCESSFUL;
	}
	return STATUS_SUCCESS;
}
#endif

#if 1
/*
	========================================================================

	Routine Description: Write 8-bit BBP register

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBWriteBBPRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Id,
	IN	UCHAR			Value)
{
	BBP_CSR_CFG_STRUC	BbpCsr;
	UINT			i = 0;
	NTSTATUS		status;
	// Verify the busy condition
	do
	{
		status = RTUSBReadMACRegister(pAd, BBP_CSR_CFG, &BbpCsr.word);
		if (status >= 0)
		{
		if (!(BbpCsr.field.Busy == BUSY))
			break;
		}
		printk("RTUSBWriteBBPRegister(BBP_CSR_CFG):retry count=%d!\n", i);
		i++;
	}
	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
		return STATUS_UNSUCCESSFUL;
	}

	// Prepare for write material
	BbpCsr.word 				= 0;
	BbpCsr.field.fRead			= 0;
	BbpCsr.field.Value			= Value;
	BbpCsr.field.Busy			= 1;
	BbpCsr.field.RegNum 		= Id;
	RTUSBWriteMACRegister(pAd, BBP_CSR_CFG, BbpCsr.word);

	pAd->BbpWriteLatch[Id] = Value;

	return STATUS_SUCCESS;
}
#else
/*
	========================================================================

	Routine Description: Write 8-bit BBP register via firmware

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/

NTSTATUS	RTUSBWriteBBPRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			Id,
	IN	UCHAR			Value)

{
	BBP_CSR_CFG_STRUC	BbpCsr;
	int					BusyCnt;
	for (BusyCnt=0; BusyCnt<MAX_BUSY_COUNT; BusyCnt++)
	{
		RTMP_IO_READ32(pAd, H2M_BBP_AGENT, &BbpCsr.word);
		if (BbpCsr.field.Busy == BUSY)
			continue;
		BbpCsr.word = 0;
		BbpCsr.field.fRead = 0;
		BbpCsr.field.BBP_RW_MODE = 1;
		BbpCsr.field.Busy = 1;
		BbpCsr.field.Value = Value;
		BbpCsr.field.RegNum = Id;
		RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, BbpCsr.word);
		AsicSendCommandToMcu(pAd, 0x80, 0xff, 0x0, 0x0);
		pAd->BbpWriteLatch[Id] = Value;
		break;
	}
	if (BusyCnt == MAX_BUSY_COUNT)
	{
		DBGPRINT_ERR(("BBP write R%d=0x%x fail\n", Id, BbpCsr.word));
		return STATUS_UNSUCCESSFUL;
	}
	return STATUS_SUCCESS;
}
#endif
/*
	========================================================================

	Routine Description: Write RF register through MAC

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBWriteRFRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UINT32			Value)
{
	PHY_CSR4_STRUC	PhyCsr4;
	UINT			i = 0;
	NTSTATUS		status;

	NdisZeroMemory(&PhyCsr4, sizeof(PHY_CSR4_STRUC));
	do
	{
		status = RTUSBReadMACRegister(pAd, RF_CSR_CFG0, &PhyCsr4.word);
		if (status >= 0)
		{
		if (!(PhyCsr4.field.Busy))
			break;
		}
		printk("RTUSBWriteRFRegister(RF_CSR_CFG0):retry count=%d!\n", i);
		i++;
	}
	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
		return STATUS_UNSUCCESSFUL;
	}

	RTUSBWriteMACRegister(pAd, RF_CSR_CFG0, Value);

	return STATUS_SUCCESS;
}

/*
	========================================================================

	Routine Description: Write RT3070 RF register through MAC

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RT30xxWriteRFRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			RegID,
	IN	UCHAR			Value)
{
	RF_CSR_CFG_STRUC	rfcsr;
	UINT				i = 0;

	do
	{
		RTUSBReadMACRegister(pAd, RF_CSR_CFG, &rfcsr.word);

		if (!rfcsr.field.RF_CSR_KICK)
			break;
		i++;
	}
	while ((i < RETRY_LIMIT) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)));

	if ((i == RETRY_LIMIT) || (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
	{
		DBGPRINT_RAW(RT_DEBUG_ERROR, ("Retry count exhausted or device removed!!!\n"));
		return STATUS_UNSUCCESSFUL;
	}

	rfcsr.field.RF_CSR_WR = 1;
	rfcsr.field.RF_CSR_KICK = 1;
	rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
	rfcsr.field.RF_CSR_DATA = Value;

	RTUSBWriteMACRegister(pAd, RF_CSR_CFG, rfcsr.word);

	return STATUS_SUCCESS;
}

/*
	========================================================================

	Routine Description: Read RT3070 RF register through MAC

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RT30xxReadRFRegister(
	IN	PRTMP_ADAPTER	pAd,
	IN	UCHAR			RegID,
	IN	PUCHAR			pValue)
{
	RF_CSR_CFG_STRUC	rfcsr;
	UINT				i=0, k;

	for (i=0; i<MAX_BUSY_COUNT; i++)
	{
		RTUSBReadMACRegister(pAd, RF_CSR_CFG, &rfcsr.word);

		if (rfcsr.field.RF_CSR_KICK == BUSY)
		{
			continue;
		}
		rfcsr.word = 0;
		rfcsr.field.RF_CSR_WR = 0;
		rfcsr.field.RF_CSR_KICK = 1;
		rfcsr.field.TESTCSR_RFACC_REGNUM = RegID;
		RTUSBWriteMACRegister(pAd, RF_CSR_CFG, rfcsr.word);
		for (k=0; k<MAX_BUSY_COUNT; k++)
		{
			RTUSBReadMACRegister(pAd, RF_CSR_CFG, &rfcsr.word);

			if (rfcsr.field.RF_CSR_KICK == IDLE)
				break;
		}
		if ((rfcsr.field.RF_CSR_KICK == IDLE) &&
			(rfcsr.field.TESTCSR_RFACC_REGNUM == RegID))
		{
			*pValue = (UCHAR)rfcsr.field.RF_CSR_DATA;
			break;
		}
	}
	if (rfcsr.field.RF_CSR_KICK == BUSY)
	{
		DBGPRINT_ERR(("RF read R%d=0x%x fail\n", RegID, rfcsr.word));
		return STATUS_UNSUCCESSFUL;
	}

	return STATUS_SUCCESS;
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBReadEEPROM(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	OUT	PUCHAR			pData,
	IN	USHORT			length)
{
	NTSTATUS	Status = STATUS_SUCCESS;

	Status = RTUSB_VendorRequest(
		pAd,
		(USBD_TRANSFER_DIRECTION_IN | USBD_SHORT_TRANSFER_OK),
		DEVICE_VENDOR_REQUEST_IN,
		0x9,
		0,
		Offset,
		pData,
		length);

	return Status;
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS	RTUSBWriteEEPROM(
	IN	PRTMP_ADAPTER	pAd,
	IN	USHORT			Offset,
	IN	PUCHAR			pData,
	IN	USHORT			length)
{
	NTSTATUS	Status = STATUS_SUCCESS;

	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x8,
		0,
		Offset,
		pData,
		length);

	return Status;
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
VOID RTUSBPutToSleep(
	IN	PRTMP_ADAPTER	pAd)
{
	UINT32		value;

	// Timeout 0x40 x 50us
	value = (SLEEPCID<<16)+(OWNERMCU<<24)+ (0x40<<8)+1;
	RTUSBWriteMACRegister(pAd, 0x7010, value);
	RTUSBWriteMACRegister(pAd, 0x404, 0x30);
	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS);
	DBGPRINT_RAW(RT_DEBUG_ERROR, ("Sleep Mailbox testvalue %x\n", value));

}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NTSTATUS RTUSBWakeUp(
	IN	PRTMP_ADAPTER	pAd)
{
	NTSTATUS	Status;

	Status = RTUSB_VendorRequest(
		pAd,
		USBD_TRANSFER_DIRECTION_OUT,
		DEVICE_VENDOR_REQUEST_OUT,
		0x01,
		0x09,
		0,
		NULL,
		0);

	return Status;
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
VOID	RTUSBInitializeCmdQ(
	IN	PCmdQ	cmdq)
{
	cmdq->head = NULL;
	cmdq->tail = NULL;
	cmdq->size = 0;
	cmdq->CmdQState = RT2870_THREAD_INITED;
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NDIS_STATUS	RTUSBEnqueueCmdFromNdis(
	IN	PRTMP_ADAPTER	pAd,
	IN	NDIS_OID		Oid,
	IN	BOOLEAN			SetInformation,
	IN	PVOID			pInformationBuffer,
	IN	UINT32			InformationBufferLength)
{
	NDIS_STATUS	status;
	PCmdQElmt	cmdqelmt = NULL;
	POS_COOKIE pObj = (POS_COOKIE) pAd->OS_Cookie;


	BUG_ON(pObj->RTUSBCmdThr_task == NULL);
	CHECK_PID_LEGALITY(task_pid(pObj->RTUSBCmdThr_task))
		return (NDIS_STATUS_RESOURCES);

	status = RTMPAllocateMemory((PVOID *)&cmdqelmt, sizeof(CmdQElmt));
	if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt == NULL))
		return (NDIS_STATUS_RESOURCES);

		cmdqelmt->buffer = NULL;
		if (pInformationBuffer != NULL)
		{
			status = RTMPAllocateMemory((PVOID *)&cmdqelmt->buffer, InformationBufferLength);
			if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt->buffer == NULL))
			{
				kfree(cmdqelmt);
				return (NDIS_STATUS_RESOURCES);
			}
			else
			{
				NdisMoveMemory(cmdqelmt->buffer, pInformationBuffer, InformationBufferLength);
				cmdqelmt->bufferlength = InformationBufferLength;
			}
		}
		else
			cmdqelmt->bufferlength = 0;

	cmdqelmt->command = Oid;
	cmdqelmt->CmdFromNdis = TRUE;
	if (SetInformation == TRUE)
		cmdqelmt->SetOperation = TRUE;
	else
		cmdqelmt->SetOperation = FALSE;

	NdisAcquireSpinLock(&pAd->CmdQLock);
	if (pAd->CmdQ.CmdQState & RT2870_THREAD_CAN_DO_INSERT)
	{
		EnqueueCmd((&pAd->CmdQ), cmdqelmt);
		status = NDIS_STATUS_SUCCESS;
	}
	else
	{
		status = NDIS_STATUS_FAILURE;
	}
	NdisReleaseSpinLock(&pAd->CmdQLock);

	if (status == NDIS_STATUS_FAILURE)
	{
		if (cmdqelmt->buffer)
			NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
		NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
	}
	else
	RTUSBCMDUp(pAd);


    return(NDIS_STATUS_SUCCESS);
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
NDIS_STATUS RTUSBEnqueueInternalCmd(
	IN PRTMP_ADAPTER	pAd,
	IN NDIS_OID			Oid,
	IN PVOID			pInformationBuffer,
	IN UINT32			InformationBufferLength)
{
	NDIS_STATUS	status;
	PCmdQElmt	cmdqelmt = NULL;


	status = RTMPAllocateMemory((PVOID *)&cmdqelmt, sizeof(CmdQElmt));
	if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt == NULL))
		return (NDIS_STATUS_RESOURCES);
	NdisZeroMemory(cmdqelmt, sizeof(CmdQElmt));

	if(InformationBufferLength > 0)
	{
		status = RTMPAllocateMemory((PVOID *)&cmdqelmt->buffer, InformationBufferLength);
		if ((status != NDIS_STATUS_SUCCESS) || (cmdqelmt->buffer == NULL))
		{
			NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
			return (NDIS_STATUS_RESOURCES);
		}
		else
		{
			NdisMoveMemory(cmdqelmt->buffer, pInformationBuffer, InformationBufferLength);
			cmdqelmt->bufferlength = InformationBufferLength;
		}
	}
	else
	{
		cmdqelmt->buffer = NULL;
		cmdqelmt->bufferlength = 0;
	}

	cmdqelmt->command = Oid;
	cmdqelmt->CmdFromNdis = FALSE;

	if (cmdqelmt != NULL)
	{
		NdisAcquireSpinLock(&pAd->CmdQLock);
		if (pAd->CmdQ.CmdQState & RT2870_THREAD_CAN_DO_INSERT)
		{
			EnqueueCmd((&pAd->CmdQ), cmdqelmt);
			status = NDIS_STATUS_SUCCESS;
		}
		else
		{
			status = NDIS_STATUS_FAILURE;
		}
		NdisReleaseSpinLock(&pAd->CmdQLock);

		if (status == NDIS_STATUS_FAILURE)
		{
			if (cmdqelmt->buffer)
				NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
			NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
		}
		else
		RTUSBCMDUp(pAd);
	}
	return(NDIS_STATUS_SUCCESS);
}

/*
	========================================================================

	Routine Description:

	Arguments:

	Return Value:

	IRQL =

	Note:

	========================================================================
*/
VOID	RTUSBDequeueCmd(
	IN	PCmdQ		cmdq,
	OUT	PCmdQElmt	*pcmdqelmt)
{
	*pcmdqelmt = cmdq->head;

	if (*pcmdqelmt != NULL)
	{
		cmdq->head = cmdq->head->next;
		cmdq->size--;
		if (cmdq->size == 0)
			cmdq->tail = NULL;
	}
}

/*
    ========================================================================
	  usb_control_msg - Builds a control urb, sends it off and waits for completion
	  @dev: pointer to the usb device to send the message to
	  @pipe: endpoint "pipe" to send the message to
	  @request: USB message request value
	  @requesttype: USB message request type value
	  @value: USB message value
	  @index: USB message index value
	  @data: pointer to the data to send
	  @size: length in bytes of the data to send
	  @timeout: time in jiffies to wait for the message to complete before
			  timing out (if 0 the wait is forever)
	  Context: !in_interrupt ()

	  This function sends a simple control message to a specified endpoint
	  and waits for the message to complete, or timeout.
	  If successful, it returns the number of bytes transferred, otherwise a negative error number.

	 Don't use this function from within an interrupt context, like a
	  bottom half handler.	If you need an asynchronous message, or need to send
	  a message from within interrupt context, use usb_submit_urb()
	  If a thread in your driver uses this call, make sure your disconnect()
	  method can wait for it to complete.  Since you don't have a handle on
	  the URB used, you can't cancel the request.


	Routine Description:

	Arguments:

	Return Value:

	Note:

	========================================================================
*/
NTSTATUS    RTUSB_VendorRequest(
	IN	PRTMP_ADAPTER	pAd,
	IN	UINT32			TransferFlags,
	IN	UCHAR			RequestType,
	IN	UCHAR			Request,
	IN	USHORT			Value,
	IN	USHORT			Index,
	IN	PVOID			TransferBuffer,
	IN	UINT32			TransferBufferLength)
{
	int				ret;
	POS_COOKIE		pObj = (POS_COOKIE) pAd->OS_Cookie;

	if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
	{
		DBGPRINT(RT_DEBUG_ERROR, ("device disconnected\n"));
		return -1;
	}
	else if (in_interrupt())
	{
		DBGPRINT(RT_DEBUG_ERROR, ("in_interrupt, RTUSB_VendorRequest Request%02x Value%04x Offset%04x\n",Request,Value,Index));

		return -1;
	}
	else
	{
#define MAX_RETRY_COUNT  10

		int retryCount = 0;
		void	*tmpBuf = TransferBuffer;

		// Acquire Control token
#ifdef INF_AMAZON_SE
		//Semaphore fix INF_AMAZON_SE hang
		//pAd->UsbVendorReqBuf is the swap for DEVICE_VENDOR_REQUEST_IN to fix dma bug.
		ret = down_interruptible(&(pAd->UsbVendorReq_semaphore));
		if (pAd->UsbVendorReqBuf)
		{
			ASSERT(TransferBufferLength <MAX_PARAM_BUFFER_SIZE);

		   	tmpBuf = (void *)pAd->UsbVendorReqBuf;
		   	NdisZeroMemory(pAd->UsbVendorReqBuf, TransferBufferLength);

		   	if (RequestType == DEVICE_VENDOR_REQUEST_OUT)
		   	 NdisMoveMemory(tmpBuf, TransferBuffer, TransferBufferLength);
		}
#endif // INF_AMAZON_SE //
		do {
		if( RequestType == DEVICE_VENDOR_REQUEST_OUT)
			ret=usb_control_msg(pObj->pUsb_Dev, usb_sndctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, tmpBuf, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
		else if(RequestType == DEVICE_VENDOR_REQUEST_IN)
			ret=usb_control_msg(pObj->pUsb_Dev, usb_rcvctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, tmpBuf, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
		else
		{
			DBGPRINT(RT_DEBUG_ERROR, ("vendor request direction is failed\n"));
			ret = -1;
		}

			retryCount++;
			if (ret < 0) {
				printk("#\n");
				RTMPusecDelay(5000);
			}
		} while((ret < 0) && (retryCount < MAX_RETRY_COUNT));

#ifdef INF_AMAZON_SE
	  	if ((pAd->UsbVendorReqBuf) && (RequestType == DEVICE_VENDOR_REQUEST_IN))
			NdisMoveMemory(TransferBuffer, tmpBuf, TransferBufferLength);
	  	up(&(pAd->UsbVendorReq_semaphore));
#endif // INF_AMAZON_SE //

        if (ret < 0) {
//			DBGPRINT(RT_DEBUG_ERROR, ("USBVendorRequest failed ret=%d \n",ret));
			DBGPRINT(RT_DEBUG_ERROR, ("RTUSB_VendorRequest failed(%d),TxFlags=0x%x, ReqType=%s, Req=0x%x, Index=0x%x\n",
						ret, TransferFlags, (RequestType == DEVICE_VENDOR_REQUEST_OUT ? "OUT" : "IN"), Request, Index));
			if (Request == 0x2)
				DBGPRINT(RT_DEBUG_ERROR, ("\tRequest Value=0x%04x!\n", Value));

			if ((TransferBuffer!= NULL) && (TransferBufferLength > 0))
				hex_dump("Failed TransferBuffer value", TransferBuffer, TransferBufferLength);
        }

#if 0
        // retry
		if (ret < 0) {
			int temp_i=0;
			DBGPRINT(RT_DEBUG_ERROR, ("USBVendorRequest failed ret=%d, \n",ret));
			ret = 0;
			do
			{
				if( RequestType == DEVICE_VENDOR_REQUEST_OUT)
					ret=usb_control_msg(pObj->pUsb_Dev, usb_sndctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, TransferBuffer, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
				else if(RequestType == DEVICE_VENDOR_REQUEST_IN)
					ret=usb_control_msg(pObj->pUsb_Dev, usb_rcvctrlpipe( pObj->pUsb_Dev, 0 ), Request, RequestType, Value,Index, TransferBuffer, TransferBufferLength, CONTROL_TIMEOUT_JIFFIES);
				temp_i++;
			} while( (ret < 0) && (temp_i <= 1) );

			if( ret >= 0)
				return ret;

		}
#endif

	}
	return ret;
}

/*
	========================================================================

	Routine Description:
	  Creates an IRP to submite an IOCTL_INTERNAL_USB_RESET_PORT
	  synchronously. Callers of this function must be running at
	  PASSIVE LEVEL.

	Arguments:

	Return Value:

	Note:

	========================================================================
*/
NTSTATUS	RTUSB_ResetDevice(
	IN	PRTMP_ADAPTER	pAd)
{
	NTSTATUS		Status = TRUE;

	DBGPRINT_RAW(RT_DEBUG_TRACE, ("--->USB_ResetDevice\n"));
	//RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS);
	return Status;
}

VOID CMDHandler(
    IN PRTMP_ADAPTER pAd)
{
	PCmdQElmt		cmdqelmt;
	PUCHAR			pData;
	NDIS_STATUS		NdisStatus = NDIS_STATUS_SUCCESS;
//	ULONG			Now = 0;
	NTSTATUS		ntStatus;
//	unsigned long	IrqFlags;

	while (pAd->CmdQ.size > 0)
	{
		NdisStatus = NDIS_STATUS_SUCCESS;

		NdisAcquireSpinLock(&pAd->CmdQLock);
		RTUSBDequeueCmd(&pAd->CmdQ, &cmdqelmt);
		NdisReleaseSpinLock(&pAd->CmdQLock);

		if (cmdqelmt == NULL)
			break;

		pData = cmdqelmt->buffer;

		if(!(RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) || RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)))
		{
			switch (cmdqelmt->command)
			{
				case CMDTHREAD_CHECK_GPIO:
					{
#ifdef CONFIG_STA_SUPPORT
						UINT32 data;
#endif // CONFIG_STA_SUPPORT //
#ifdef RALINK_ATE
       					if(ATE_ON(pAd))
						{
							DBGPRINT(RT_DEBUG_TRACE, ("The driver is in ATE mode now\n"));
							break;
						}
#endif // RALINK_ATE //

#ifdef CONFIG_STA_SUPPORT


						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
						{
							// Read GPIO pin2 as Hardware controlled radio state

							RTUSBReadMACRegister( pAd, GPIO_CTRL_CFG, &data);

							if (data & 0x04)
							{
								pAd->StaCfg.bHwRadio = TRUE;
							}
							else
							{
								pAd->StaCfg.bHwRadio = FALSE;
							}

							if(pAd->StaCfg.bRadio != (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio))
							{
								pAd->StaCfg.bRadio = (pAd->StaCfg.bHwRadio && pAd->StaCfg.bSwRadio);
								if(pAd->StaCfg.bRadio == TRUE)
								{
									DBGPRINT_RAW(RT_DEBUG_ERROR, ("!!! Radio On !!!\n"));

									MlmeRadioOn(pAd);
									// Update extra information
									pAd->ExtraInfo = EXTRA_INFO_CLEAR;
								}
								else
								{
									DBGPRINT_RAW(RT_DEBUG_ERROR, ("!!! Radio Off !!!\n"));

									MlmeRadioOff(pAd);
									// Update extra information
									pAd->ExtraInfo = HW_RADIO_OFF;
								}
							}
						}
#endif // CONFIG_STA_SUPPORT //
					}
					break;

#ifdef CONFIG_STA_SUPPORT
				case CMDTHREAD_QKERIODIC_EXECUT:
					{
						StaQuickResponeForRateUpExec(NULL, pAd, NULL, NULL);
					}
					break;
#endif // CONFIG_STA_SUPPORT //

				case CMDTHREAD_RESET_BULK_OUT:
					{
						UINT32		MACValue;
						UCHAR		Index;
						int			ret=0;
						PHT_TX_CONTEXT	pHTTXContext;
//						RTMP_TX_RING *pTxRing;
						unsigned long IrqFlags;
#ifdef RALINK_ATE
						PTX_CONTEXT		pNullContext = &(pAd->NullContext);
#endif // RALINK_ATE //
						DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT(ResetPipeid=0x%0x)===>\n", pAd->bulkResetPipeid));
						// All transfers must be aborted or cancelled before attempting to reset the pipe.
						//RTUSBCancelPendingBulkOutIRP(pAd);
						// Wait 10ms to let previous packet that are already in HW FIFO to clear. by MAXLEE 12-25-2007
						Index = 0;
						do
						{
							RTUSBReadMACRegister(pAd, TXRXQ_PCNT, &MACValue);
							if ((MACValue & 0xf00000/*0x800000*/) == 0)
								break;
							Index++;
							RTMPusecDelay(10000);
						}while(Index < 100);
						MACValue = 0;
						RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue);
						// To prevent Read Register error, we 2nd check the validity.
						if ((MACValue & 0xc00000) == 0)
							RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue);
						// To prevent Read Register error, we 3rd check the validity.
						if ((MACValue & 0xc00000) == 0)
							RTUSBReadMACRegister(pAd, USB_DMA_CFG, &MACValue);
						MACValue |= 0x80000;
						RTUSBWriteMACRegister(pAd, USB_DMA_CFG, MACValue);

						// Wait 1ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
						RTMPusecDelay(1000);

						MACValue &= (~0x80000);
						RTUSBWriteMACRegister(pAd, USB_DMA_CFG, MACValue);
						DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tSet 0x2a0 bit19. Clear USB DMA TX path\n"));

						// Wait 5ms to prevent next URB to bulkout before HW reset. by MAXLEE 12-25-2007
						//RTMPusecDelay(5000);

						if ((pAd->bulkResetPipeid & BULKOUT_MGMT_RESET_FLAG) == BULKOUT_MGMT_RESET_FLAG)
						{
							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);
							if (pAd->MgmtRing.TxSwFreeIdx < MGMT_RING_SIZE /* pMLMEContext->bWaitingBulkOut == TRUE */)
							{
								RTUSB_SET_BULK_FLAG(pAd, fRTUSB_BULK_OUT_MLME);
							}
							RTUSBKickBulkOut(pAd);

							DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tTX MGMT RECOVER Done!\n"));
						}
						else
						{
							pHTTXContext = &(pAd->TxContext[pAd->bulkResetPipeid]);
							//NdisAcquireSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
							RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
							if ( pAd->BulkOutPending[pAd->bulkResetPipeid] == FALSE)
							{
								pAd->BulkOutPending[pAd->bulkResetPipeid] = TRUE;
								pHTTXContext->IRPPending = TRUE;
								pAd->watchDogTxPendingCnt[pAd->bulkResetPipeid] = 1;

								// no matter what, clean the flag
								RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);

								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
/*-----------------------------------------------------------------------------------------------*/
#ifdef RALINK_ATE
								if(ATE_ON(pAd))
							    {
									pNullContext->IRPPending = TRUE;
									//
									// If driver is still in ATE TXFRAME mode,
									// keep on transmitting ATE frames.
									//
									DBGPRINT_RAW(RT_DEBUG_TRACE, ("pAd->ate.Mode == %d\npAd->ContinBulkOut == %d\npAd->BulkOutRemained == %d\n", pAd->ate.Mode, pAd->ContinBulkOut, atomic_read(&pAd->BulkOutRemained)));
									if((pAd->ate.Mode == ATE_TXFRAME) && ((pAd->ContinBulkOut == TRUE) || (atomic_read(&pAd->BulkOutRemained) > 0)))
								    {
										DBGPRINT_RAW(RT_DEBUG_TRACE, ("After CMDTHREAD_RESET_BULK_OUT, continue to bulk out frames !\n"));

										// Init Tx context descriptor
										RTUSBInitTxDesc(pAd, pNullContext, 0/* pAd->bulkResetPipeid */, (usb_complete_t)ATE_RTUSBBulkOutDataPacketComplete);

										if((ret = RTUSB_SUBMIT_URB(pNullContext->pUrb))!=0)
										{
											DBGPRINT(RT_DEBUG_ERROR, ("ATE_RTUSBBulkOutDataPacket: Submit Tx URB failed %d\n", ret));
										}

										pAd->BulkOutReq++;
									}
								}
								else
#endif // RALINK_ATE //
/*-----------------------------------------------------------------------------------------------*/
								{
								RTUSBInitHTTxDesc(pAd, pHTTXContext, pAd->bulkResetPipeid, pHTTXContext->BulkOutSize, (usb_complete_t)RTUSBBulkOutDataPacketComplete);

								if((ret = RTUSB_SUBMIT_URB(pHTTXContext->pUrb))!=0)
								{
										RTMP_INT_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
									pAd->BulkOutPending[pAd->bulkResetPipeid] = FALSE;
									pHTTXContext->IRPPending = FALSE;
										pAd->watchDogTxPendingCnt[pAd->bulkResetPipeid] = 0;
										RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);

										DBGPRINT(RT_DEBUG_ERROR, ("CmdThread : CMDTHREAD_RESET_BULK_OUT: Submit Tx URB failed %d\n", ret));
								}
									else
									{
										RTMP_IRQ_LOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
										DBGPRINT_RAW(RT_DEBUG_TRACE,("\tCMDTHREAD_RESET_BULK_OUT: TxContext[%d]:CWPos=%ld, NBPos=%ld, ENBPos=%ld, bCopy=%d, pending=%d!\n",
												pAd->bulkResetPipeid, pHTTXContext->CurWritePosition, pHTTXContext->NextBulkOutPosition,
															pHTTXContext->ENextBulkOutPosition, pHTTXContext->bCopySavePad, pAd->BulkOutPending[pAd->bulkResetPipeid]));
										DBGPRINT_RAW(RT_DEBUG_TRACE,("\t\tBulkOut Req=0x%lx, Complete=0x%lx, Other=0x%lx\n",
															pAd->BulkOutReq, pAd->BulkOutComplete, pAd->BulkOutCompleteOther));
										RTMP_IRQ_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);
										DBGPRINT_RAW(RT_DEBUG_TRACE, ("\tCMDTHREAD_RESET_BULK_OUT: Submit Tx DATA URB for failed BulkReq(0x%lx) Done, status=%d!\n", pAd->bulkResetReq[pAd->bulkResetPipeid], pHTTXContext->pUrb->status));

									}
								}
							}
							else
							{
								//NdisReleaseSpinLock(&pAd->BulkOutLock[pAd->bulkResetPipeid]);
								//RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);

								DBGPRINT_RAW(RT_DEBUG_ERROR, ("CmdThread : TX DATA RECOVER FAIL for BulkReq(0x%lx) because BulkOutPending[%d] is TRUE!\n", pAd->bulkResetReq[pAd->bulkResetPipeid], pAd->bulkResetPipeid));
								if (pAd->bulkResetPipeid == 0)
								{
									UCHAR	pendingContext = 0;
									PHT_TX_CONTEXT pHTTXContext = (PHT_TX_CONTEXT)(&pAd->TxContext[pAd->bulkResetPipeid ]);
									PTX_CONTEXT pMLMEContext = (PTX_CONTEXT)(pAd->MgmtRing.Cell[pAd->MgmtRing.TxDmaIdx].AllocVa);
									PTX_CONTEXT pNULLContext = (PTX_CONTEXT)(&pAd->PsPollContext);
									PTX_CONTEXT pPsPollContext = (PTX_CONTEXT)(&pAd->NullContext);

									if (pHTTXContext->IRPPending)
										pendingContext |= 1;
									else if (pMLMEContext->IRPPending)
										pendingContext |= 2;
									else if (pNULLContext->IRPPending)
										pendingContext |= 4;
									else if (pPsPollContext->IRPPending)
										pendingContext |= 8;
									else
										pendingContext = 0;

									DBGPRINT_RAW(RT_DEBUG_ERROR, ("\tTX Occupied by %d!\n", pendingContext));
								}

							// no matter what, clean the flag
							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKOUT_RESET);

								RTMP_INT_UNLOCK(&pAd->BulkOutLock[pAd->bulkResetPipeid], IrqFlags);

								RTUSB_SET_BULK_FLAG(pAd, (fRTUSB_BULK_OUT_DATA_NORMAL << pAd->bulkResetPipeid));
							}

							RTMPDeQueuePacket(pAd, FALSE, NUM_OF_TX_RING, MAX_TX_PROCESS);
							//RTUSBKickBulkOut(pAd);
						}

					}
					/*
						// Don't cancel BULKIN.
						while ((atomic_read(&pAd->PendingRx) > 0) &&
								(!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
						{
							if (atomic_read(&pAd->PendingRx) > 0)
							{
								DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkIn IRP Pending!!cancel it!\n"));
								RTUSBCancelPendingBulkInIRP(pAd);
							}
							RTMPusecDelay(100000);
						}

						if ((atomic_read(&pAd->PendingRx) == 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS)))
						{
							UCHAR	i;
							RTUSBRxPacket(pAd);
							pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
							pAd->NextRxBulkInIndex		= 0;	// Rx Bulk pointer
							for (i = 0; i < (RX_RING_SIZE); i++)
							{
								PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);

								pRxContext->pAd	= pAd;
								pRxContext->InUse		= FALSE;
								pRxContext->IRPPending	= FALSE;
								pRxContext->Readable	= FALSE;
								pRxContext->ReorderInUse = FALSE;

							}
							RTUSBBulkReceive(pAd);
							DBGPRINT_RAW(RT_DEBUG_ERROR, ("RTUSBBulkReceive\n"));
						}*/
					DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_OUT<===\n"));
    	   			break;

				case CMDTHREAD_RESET_BULK_IN:
					DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_IN === >\n"));

					// All transfers must be aborted or cancelled before attempting to reset the pipe.
					{
						UINT32		MACValue;
/*-----------------------------------------------------------------------------------------------*/
#ifdef RALINK_ATE
						if (ATE_ON(pAd))
						{
							if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
							{
								DBGPRINT_RAW(RT_DEBUG_ERROR, ("ATE : BulkIn IRP Pending!!!\n"));
								ATE_RTUSBCancelPendingBulkInIRP(pAd);
								RTMPusecDelay(100000);
								pAd->PendingRx = 0;
							}
						}
						else
#endif // RALINK_ATE //
/*-----------------------------------------------------------------------------------------------*/
						{
						//while ((atomic_read(&pAd->PendingRx) > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
						if((pAd->PendingRx > 0) && (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST)))
						{
							DBGPRINT_RAW(RT_DEBUG_ERROR, ("BulkIn IRP Pending!!!\n"));
							RTUSBCancelPendingBulkInIRP(pAd);
							RTMPusecDelay(100000);
							pAd->PendingRx = 0;
						}
						}

						// Wait 10ms before reading register.
						RTMPusecDelay(10000);
						ntStatus = RTUSBReadMACRegister(pAd, MAC_CSR0, &MACValue);

						if ((NT_SUCCESS(ntStatus) == TRUE) &&
							(!(RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_RADIO_OFF |
													fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))))
						{
							UCHAR	i;

							if (RTMP_TEST_FLAG(pAd, (fRTMP_ADAPTER_RESET_IN_PROGRESS | fRTMP_ADAPTER_RADIO_OFF |
														fRTMP_ADAPTER_HALT_IN_PROGRESS | fRTMP_ADAPTER_NIC_NOT_EXIST)))
								break;
							pAd->NextRxBulkInPosition = pAd->RxContext[pAd->NextRxBulkInIndex].BulkInOffset;
							DBGPRINT(RT_DEBUG_TRACE, ("BULK_IN_RESET: NBIIdx=0x%x,NBIRIdx=0x%x, BIRPos=0x%lx. BIReq=x%lx, BIComplete=0x%lx, BICFail0x%lx\n",
									pAd->NextRxBulkInIndex,  pAd->NextRxBulkInReadIndex, pAd->NextRxBulkInPosition, pAd->BulkInReq, pAd->BulkInComplete, pAd->BulkInCompleteFail));
							for (i = 0; i < RX_RING_SIZE; i++)
							{
 								DBGPRINT(RT_DEBUG_TRACE, ("\tRxContext[%d]: IRPPending=%d, InUse=%d, Readable=%d!\n"
									, i, pAd->RxContext[i].IRPPending, pAd->RxContext[i].InUse, pAd->RxContext[i].Readable));
							}
 							/*

							DBGPRINT_RAW(RT_DEBUG_ERROR, ("==========================================\n"));

							pAd->NextRxBulkInReadIndex = 0;	// Next Rx Read index
							pAd->NextRxBulkInIndex		= 0;	// Rx Bulk pointer
							for (i = 0; i < (RX_RING_SIZE); i++)
							{
								PRX_CONTEXT  pRxContext = &(pAd->RxContext[i]);

								pRxContext->pAd	= pAd;
								pRxContext->InUse		= FALSE;
								pRxContext->IRPPending	= FALSE;
								pRxContext->Readable	= FALSE;
								pRxContext->ReorderInUse = FALSE;

							}*/
							RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BULKIN_RESET);
							for (i = 0; i < pAd->CommonCfg.NumOfBulkInIRP; i++)
							{
								//RTUSBBulkReceive(pAd);
								PRX_CONTEXT		pRxContext;
								PURB			pUrb;
								int				ret = 0;
								unsigned long	IrqFlags;


								RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
								pRxContext = &(pAd->RxContext[pAd->NextRxBulkInIndex]);
								if ((pAd->PendingRx > 0) || (pRxContext->Readable == TRUE) || (pRxContext->InUse == TRUE))
								{
									RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
									break;
								}
								pRxContext->InUse = TRUE;
								pRxContext->IRPPending = TRUE;
								pAd->PendingRx++;
								pAd->BulkInReq++;
								RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);

								// Init Rx context descriptor
								RTUSBInitRxDesc(pAd, pRxContext);
								pUrb = pRxContext->pUrb;
								if ((ret = RTUSB_SUBMIT_URB(pUrb))!=0)
								{	// fail

									RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
									pRxContext->InUse = FALSE;
									pRxContext->IRPPending = FALSE;
									pAd->PendingRx--;
									pAd->BulkInReq--;
									RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
									DBGPRINT(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_IN: Submit Rx URB failed(%d), status=%d\n", ret, pUrb->status));
								}
								else
								{	// success
#if 0
									RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
									pRxContext->IRPPending = TRUE;
									//NdisInterlockedIncrement(&pAd->PendingRx);
									pAd->PendingRx++;
									RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
									pAd->BulkInReq++;
#endif
									//printk("BIDone, Pend=%d,BIIdx=%d,BIRIdx=%d!\n", pAd->PendingRx, pAd->NextRxBulkInIndex, pAd->NextRxBulkInReadIndex);
									DBGPRINT_RAW(RT_DEBUG_TRACE, ("CMDTHREAD_RESET_BULK_IN: Submit Rx URB Done, status=%d!\n", pUrb->status));
									ASSERT((pRxContext->InUse == pRxContext->IRPPending));
								}
							}

						}
						else
						{
							// Card must be removed
							if (NT_SUCCESS(ntStatus) != TRUE)
							{
							RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST);
								DBGPRINT_RAW(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_IN: Read Register Failed!Card must be removed!!\n\n"));
							}
							else
							{
								DBGPRINT_RAW(RT_DEBUG_ERROR, ("CMDTHREAD_RESET_BULK_IN: Cannot do bulk in because flags(0x%lx) on !\n", pAd->Flags));
						}
					}
					}
					DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_RESET_BULK_IN <===\n"));
					break;

				case CMDTHREAD_SET_ASIC_WCID:
					{
						RT_SET_ASIC_WCID	SetAsicWcid;
						USHORT		offset;
						UINT32		MACValue, MACRValue = 0;
						SetAsicWcid = *((PRT_SET_ASIC_WCID)(pData));

						if (SetAsicWcid.WCID >= MAX_LEN_OF_MAC_TABLE)
							return;

						offset = MAC_WCID_BASE + ((UCHAR)SetAsicWcid.WCID)*HW_WCID_ENTRY_SIZE;

						DBGPRINT_RAW(RT_DEBUG_TRACE, ("CmdThread : CMDTHREAD_SET_ASIC_WCID : WCID = %ld, SetTid  = %lx, DeleteTid = %lx.\n", SetAsicWcid.WCID, SetAsicWcid.SetTid, SetAsicWcid.DeleteTid));
						MACValue = (pAd->MacTab.Content[SetAsicWcid.WCID].Addr[3]<<24)+(pAd->MacTab.Content[SetAsicWcid.WCID].Addr[2]<<16)+(pAd->MacTab.Content[SetAsicWcid.WCID].Addr[1]<<8)+(pAd->MacTab.Content[SetAsicWcid.WCID].Addr[0]);
						DBGPRINT_RAW(RT_DEBUG_TRACE, ("1-MACValue= %x,\n", MACValue));
						RTUSBWriteMACRegister(pAd, offset, MACValue);
						// Read bitmask
						RTUSBReadMACRegister(pAd, offset+4, &MACRValue);
						if ( SetAsicWcid.DeleteTid != 0xffffffff)
							MACRValue &= (~SetAsicWcid.DeleteTid);
						if (SetAsicWcid.SetTid != 0xffffffff)
							MACRValue |= (SetAsicWcid.SetTid);
						MACRValue &= 0xffff0000;

						MACValue = (pAd->MacTab.Content[SetAsicWcid.WCID].Addr[5]<<8)+pAd->MacTab.Content[SetAsicWcid.WCID].Addr[4];
						MACValue |= MACRValue;
						RTUSBWriteMACRegister(pAd, offset+4, MACValue);

						DBGPRINT_RAW(RT_DEBUG_TRACE, ("2-MACValue= %x,\n", MACValue));
					}
					break;

				case CMDTHREAD_SET_ASIC_WCID_CIPHER:
					{
#ifdef CONFIG_STA_SUPPORT
						RT_SET_ASIC_WCID_ATTRI	SetAsicWcidAttri;
						USHORT		offset;
						UINT32		MACRValue = 0;
						SHAREDKEY_MODE_STRUC csr1;
						SetAsicWcidAttri = *((PRT_SET_ASIC_WCID_ATTRI)(pData));

						if (SetAsicWcidAttri.WCID >= MAX_LEN_OF_MAC_TABLE)
							return;

						offset = MAC_WCID_ATTRIBUTE_BASE + ((UCHAR)SetAsicWcidAttri.WCID)*HW_WCID_ATTRI_SIZE;

						DBGPRINT_RAW(RT_DEBUG_TRACE, ("Cmd : CMDTHREAD_SET_ASIC_WCID_CIPHER : WCID = %ld, Cipher = %lx.\n", SetAsicWcidAttri.WCID, SetAsicWcidAttri.Cipher));
						// Read bitmask
						RTUSBReadMACRegister(pAd, offset, &MACRValue);
						MACRValue = 0;
						MACRValue |= (((UCHAR)SetAsicWcidAttri.Cipher) << 1);

						RTUSBWriteMACRegister(pAd, offset, MACRValue);
						DBGPRINT_RAW(RT_DEBUG_TRACE, ("2-offset = %x , MACValue= %x,\n", offset, MACRValue));

						offset = PAIRWISE_IVEIV_TABLE_BASE + ((UCHAR)SetAsicWcidAttri.WCID)*HW_IVEIV_ENTRY_SIZE;
						MACRValue = 0;
						if ( (SetAsicWcidAttri.Cipher <= CIPHER_WEP128))
							MACRValue |= ( pAd->StaCfg.DefaultKeyId << 30);
						else
							MACRValue |= (0x20000000);
						RTUSBWriteMACRegister(pAd, offset, MACRValue);
						DBGPRINT_RAW(RT_DEBUG_TRACE, ("2-offset = %x , MACValue= %x,\n", offset, MACRValue));

						//
						// Update cipher algorithm. WSTA always use BSS0
						//
						// for adhoc mode only ,because wep status slow than add key, when use zero config
						if (pAd->StaCfg.BssType == BSS_ADHOC )
						{
							offset = MAC_WCID_ATTRIBUTE_BASE;

							RTUSBReadMACRegister(pAd, offset, &MACRValue);
							MACRValue &= (~0xe);
							MACRValue |= (((UCHAR)SetAsicWcidAttri.Cipher) << 1);

							RTUSBWriteMACRegister(pAd, offset, MACRValue);

							//Update group key cipher,,because wep status slow than add key, when use zero config
							RTUSBReadMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), &csr1.word);

							csr1.field.Bss0Key0CipherAlg = SetAsicWcidAttri.Cipher;
							csr1.field.Bss0Key1CipherAlg = SetAsicWcidAttri.Cipher;

							RTUSBWriteMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), csr1.word);
						}
#endif // CONFIG_STA_SUPPORT //
					}
					break;

#ifdef CONFIG_STA_SUPPORT
#ifdef QOS_DLS_SUPPORT
				// avoid in interrupt when write key
				case RT_CMD_SET_KEY_TABLE: //General call for AsicAddPairwiseKeyEntry()
					{
						RT_ADD_PAIRWISE_KEY_ENTRY KeyInfo;
						KeyInfo  = *((PRT_ADD_PAIRWISE_KEY_ENTRY)(pData));
						AsicAddPairwiseKeyEntry(pAd,
												KeyInfo.MacAddr,
												(UCHAR)KeyInfo.MacTabMatchWCID,
												&KeyInfo.CipherKey);
					}
					break;

				case RT_CMD_SET_RX_WCID_TABLE: //General call for RTMPAddWcidAttributeEntry()
					{
						PMAC_TABLE_ENTRY pEntry ;
						pEntry = (PMAC_TABLE_ENTRY)(pData);
						RTMPAddWcidAttributeEntry(pAd,
													BSS0,
													0,
													pEntry->PairwiseKey.CipherAlg,
													pEntry);
					}
					break;
#endif // QOS_DLS_SUPPORT //
#endif // CONFIG_STA_SUPPORT //

				case CMDTHREAD_SET_CLIENT_MAC_ENTRY:
					{
						MAC_TABLE_ENTRY *pEntry;
						pEntry = (MAC_TABLE_ENTRY *)pData;


#ifdef CONFIG_STA_SUPPORT
						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
						{
							AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)pEntry->Aid);
							if ((pEntry->AuthMode <= Ndis802_11AuthModeAutoSwitch) && (pEntry->WepStatus == Ndis802_11Encryption1Enabled))
							{
								UINT32 uIV = 0;
								PUCHAR  ptr;

								ptr = (PUCHAR) &uIV;
								*(ptr + 3) = (pAd->StaCfg.DefaultKeyId << 6);
								AsicUpdateWCIDIVEIV(pAd, pEntry->Aid, uIV, 0);
								AsicUpdateWCIDAttribute(pAd, pEntry->Aid, BSS0, pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg, FALSE);
							}
							else if (pEntry->AuthMode == Ndis802_11AuthModeWPANone)
							{
								UINT32 uIV = 0;
								PUCHAR  ptr;

								ptr = (PUCHAR) &uIV;
								*(ptr + 3) = (pAd->StaCfg.DefaultKeyId << 6);
								AsicUpdateWCIDIVEIV(pAd, pEntry->Aid, uIV, 0);
								AsicUpdateWCIDAttribute(pAd, pEntry->Aid, BSS0, pAd->SharedKey[BSS0][pAd->StaCfg.DefaultKeyId].CipherAlg, FALSE);
							}
							else
							{
								//
								// Other case, disable engine.
								// Don't worry WPA key, we will add WPA Key after 4-Way handshaking.
								//
								USHORT   offset;
								offset = MAC_WCID_ATTRIBUTE_BASE + (pEntry->Aid * HW_WCID_ATTRI_SIZE);
								// RX_PKEY_MODE:0 for no security; RX_KEY_TAB:0 for shared key table; BSS_IDX:0
								RTUSBWriteMACRegister(pAd, offset, 0);
							}
						}
#endif // CONFIG_STA_SUPPORT //

						AsicUpdateRxWCIDTable(pAd, pEntry->Aid, pEntry->Addr);
						printk("UpdateRxWCIDTable(): Aid=%d, Addr=%02x:%02x:%02x:%02x:%02x:%02x!\n", pEntry->Aid,
								pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2], pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]);
					}
					break;

				case OID_802_11_ADD_WEP:
					{
#ifdef CONFIG_STA_SUPPORT
						UINT	i;
						UINT32	KeyIdx;
						PNDIS_802_11_WEP	pWepKey;

						DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP  \n"));

						pWepKey = (PNDIS_802_11_WEP)pData;
						KeyIdx = pWepKey->KeyIndex & 0x0fffffff;

						// it is a shared key
						if ((KeyIdx >= 4) || ((pWepKey->KeyLength != 5) && (pWepKey->KeyLength != 13)))
						{
							NdisStatus = NDIS_STATUS_INVALID_DATA;
							DBGPRINT(RT_DEBUG_ERROR, ("CmdThread::OID_802_11_ADD_WEP, INVALID_DATA!!\n"));
						}
						else
						{
							UCHAR CipherAlg;
							pAd->SharedKey[BSS0][KeyIdx].KeyLen = (UCHAR) pWepKey->KeyLength;
							NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pWepKey->KeyMaterial, pWepKey->KeyLength);
							CipherAlg = (pAd->SharedKey[BSS0][KeyIdx].KeyLen == 5)? CIPHER_WEP64 : CIPHER_WEP128;

							//
							// Change the WEP cipher to CKIP cipher if CKIP KP on.
							// Funk UI or Meetinghouse UI will add ckip key from this path.
							//

							if (pAd->OpMode == OPMODE_STA)
						 	{
								pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg;
								pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = pAd->SharedKey[BSS0][KeyIdx].KeyLen;
						 	}
							pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CipherAlg;
							if (pWepKey->KeyIndex & 0x80000000)
							{
								// Default key for tx (shared key)
								UCHAR	IVEIV[8];
								UINT32	WCIDAttri, Value;
								USHORT	offset, offset2;
								NdisZeroMemory(IVEIV, 8);
								pAd->StaCfg.DefaultKeyId = (UCHAR) KeyIdx;
								// Add BSSID to WCTable. because this is Tx wep key.
								// WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:1=PAIRWISE KEY, BSSIdx is 0
								WCIDAttri = (CipherAlg<<1)|SHAREDKEYTABLE;

								offset = MAC_WCID_ATTRIBUTE_BASE + (BSSID_WCID* HW_WCID_ATTRI_SIZE);
								RTUSBWriteMACRegister(pAd, offset, WCIDAttri);
								// 1. IV/EIV
								// Specify key index to find shared key.
								IVEIV[3] = (UCHAR)(KeyIdx<< 6);	//WEP Eiv bit off. groupkey index is not 0
								offset = PAIRWISE_IVEIV_TABLE_BASE + (BSS0Mcast_WCID * HW_IVEIV_ENTRY_SIZE);
								offset2 = PAIRWISE_IVEIV_TABLE_BASE + (BSSID_WCID* HW_IVEIV_ENTRY_SIZE);
								for (i=0; i<8;)
								{
									Value = IVEIV[i];
									Value += (IVEIV[i+1]<<8);
									Value += (IVEIV[i+2]<<16);
									Value += (IVEIV[i+3]<<24);
									RTUSBWriteMACRegister(pAd, offset+i, Value);
									RTUSBWriteMACRegister(pAd, offset2+i, Value);
									i+=4;
								}

								// 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0
								WCIDAttri = (pAd->SharedKey[BSS0][KeyIdx].CipherAlg<<1)|SHAREDKEYTABLE;
								offset = MAC_WCID_ATTRIBUTE_BASE + (BSS0Mcast_WCID* HW_WCID_ATTRI_SIZE);
							        DBGPRINT(RT_DEBUG_TRACE, ("BSS0Mcast_WCID : offset = %x, WCIDAttri = %x\n", offset, WCIDAttri));
								RTUSBWriteMACRegister(pAd, offset, WCIDAttri);

							}
							AsicAddSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx, CipherAlg, pWepKey->KeyMaterial, NULL, NULL);
							DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP (KeyIdx=%d, Len=%d-byte)\n", KeyIdx, pWepKey->KeyLength));
						}
#endif // CONFIG_STA_SUPPORT //
					}
					break;

				case CMDTHREAD_802_11_COUNTER_MEASURE:
					break;
				default:
					DBGPRINT(RT_DEBUG_ERROR, ("--> Control Thread !! ERROR !! Unknown(cmdqelmt->command=0x%x) !! \n", cmdqelmt->command));
					break;
			}
		}

		if (cmdqelmt->CmdFromNdis == TRUE)
		{
				if (cmdqelmt->buffer != NULL)
					NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);

			NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
		}
		else
		{
			if ((cmdqelmt->buffer != NULL) && (cmdqelmt->bufferlength != 0))
				NdisFreeMemory(cmdqelmt->buffer, cmdqelmt->bufferlength, 0);
            {
				NdisFreeMemory(cmdqelmt, sizeof(CmdQElmt), 0);
			}
		}
	}	/* end of while */
}