if (BF537 || BF534 || BF536)

menu "BF537 Specific Configuration"

comment "PORT F/G Selection"
choice
	prompt "Select BF537/6/4 default GPIO PFx PORTx"
	help
	  Quick Hack for BF537/6/4 default GPIO PFx PORTF.

config BF537_PORT_F
	bool "Select BF537/6/4 default GPIO PFx PORTF"
	depends on (BF537 || BF536 || BF534)
	help
	  Quick Hack for BF537/6/4 default GPIO PFx PORTF.

config BF537_PORT_G
	bool "Select BF537/6/4 default GPIO PFx PORTG"
	depends on (BF537 || BF536 || BF534)
	help
	  Quick Hack for BF537/6/4 default GPIO PFx PORTG.

config BF537_PORT_H
	bool "Select BF537/6/4 default GPIO PFx PORTH"
	depends on (BF537 || BF536 || BF534)
	help
	  Quick Hack for BF537/6/4 default GPIO PFx PORTH
	  Use only when Blackfin EMAC support is not required.

endchoice

comment "Interrupt Priority Assignment"
menu "Priority"

config IRQ_PLL_WAKEUP
	int "IRQ_PLL_WAKEUP"
	default 7
config IRQ_DMA_ERROR
	int "IRQ_DMA_ERROR Generic"
	default 7
config IRQ_ERROR
	int "IRQ_ERROR: CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
	default 7
config IRQ_RTC
	int "IRQ_RTC"
	default 8
config IRQ_PPI
	int "IRQ_PPI"
	default 8
config IRQ_SPORT0_RX
	int "IRQ_SPORT0_RX"
	default 9
config IRQ_SPORT0_TX
	int "IRQ_SPORT0_TX"
	default 9
config IRQ_SPORT1_RX
	int "IRQ_SPORT1_RX"
	default 9
config IRQ_SPORT1_TX
	int "IRQ_SPORT1_TX"
	default 9
config IRQ_TWI
	int "IRQ_TWI"
	default 10
config IRQ_SPI
	int "IRQ_SPI"
	default 10
config IRQ_UART0_RX
	int "IRQ_UART0_RX"
	default 10
config IRQ_UART0_TX
	int "IRQ_UART0_TX"
	default 10
config IRQ_UART1_RX
	int "IRQ_UART1_RX"
	default 10
config IRQ_UART1_TX
	int "IRQ_UART1_TX"
	default 10
config IRQ_CAN_RX
	int "IRQ_CAN_RX"
	default 11
config IRQ_CAN_TX
	int "IRQ_CAN_TX"
	default 11
config IRQ_MAC_RX
	int "IRQ_MAC_RX"
	default 11
config IRQ_MAC_TX
	int "IRQ_MAC_TX"
	default 11
config IRQ_TMR0
	int "IRQ_TMR0"
	default 12
config IRQ_TMR1
	int "IRQ_TMR1"
	default 12
config IRQ_TMR2
	int "IRQ_TMR2"
	default 12
config IRQ_TMR3
	int "IRQ_TMR3"
	default 12
config IRQ_TMR4
	int "IRQ_TMR4"
	default 12
config IRQ_TMR5
	int "IRQ_TMR5"
	default 12
config IRQ_TMR6
	int "IRQ_TMR6"
	default 12
config IRQ_TMR7
	int "IRQ_TMR7"
	default 12
config IRQ_PROG_INTA
	int "IRQ_PROG_INTA"
	default 12
config IRQ_PORTG_INTB
	int "IRQ_PORTG_INTB"
	default 12
config IRQ_MEM_DMA0
	int "IRQ_MEM_DMA0"
	default 13
config IRQ_MEM_DMA1
	int "IRQ_MEM_DMA1"
	default 13
config IRQ_WATCH
	int "IRQ_WATCH"
	default 13

	help
	  Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
	  This applies to all the above.  It is not recommended to assign the
	  highest priority number 7 to UART or any other device.

endmenu

endmenu

endif