diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 6156ac2..ab77d40 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -444,17 +444,9 @@
 	help
 	  This enables extended support for Cyrix processors
 
-config CPU_SUP_AMD_32
+config CPU_SUP_AMD
 	default y
 	bool "Support AMD processors" if PROCESSOR_SELECT
-	depends on !64BIT
-	help
-	  This enables extended support for AMD processors
-
-config CPU_SUP_AMD_64
-	default y
-	bool "Support AMD processors" if PROCESSOR_SELECT
-	depends on 64BIT
 	help
 	  This enables extended support for AMD processors
 
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index d031f24..510d1bc 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -10,8 +10,7 @@
 
 obj-$(CONFIG_CPU_SUP_INTEL_32)		+= intel.o
 obj-$(CONFIG_CPU_SUP_INTEL_64)		+= intel_64.o
-obj-$(CONFIG_CPU_SUP_AMD_32)		+= amd.o
-obj-$(CONFIG_CPU_SUP_AMD_64)		+= amd_64.o
+obj-$(CONFIG_CPU_SUP_AMD)		+= amd.o
 obj-$(CONFIG_CPU_SUP_CYRIX_32)		+= cyrix.o
 obj-$(CONFIG_CPU_SUP_CENTAUR_32)	+= centaur.o
 obj-$(CONFIG_CPU_SUP_CENTAUR_64)	+= centaur_64.o
diff --git a/arch/x86/kernel/cpu/amd_64.c b/arch/x86/kernel/cpu/amd_64.c
deleted file mode 100644
index 32e7352..0000000
--- a/arch/x86/kernel/cpu/amd_64.c
+++ /dev/null
@@ -1,473 +0,0 @@
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/apic.h>
-
-#ifdef CONFIG_X86_64
-# include <asm/numa_64.h>
-# include <asm/mmconfig.h>
-# include <asm/cacheflush.h>
-#endif
-
-#include <mach_apic.h>
-
-#include "cpu.h"
-
-#ifdef CONFIG_X86_32
-/*
- *	B step AMD K6 before B 9730xxxx have hardware bugs that can cause
- *	misexecution of code under Linux. Owners of such processors should
- *	contact AMD for precise details and a CPU swap.
- *
- *	See	http://www.multimania.com/poulot/k6bug.html
- *		http://www.amd.com/K6/k6docs/revgd.html
- *
- *	The following test is erm.. interesting. AMD neglected to up
- *	the chip setting when fixing the bug but they also tweaked some
- *	performance at the same time..
- */
-
-extern void vide(void);
-__asm__(".align 4\nvide: ret");
-
-static void __cpuinit init_amd_k5(struct cpuinfo_x86 *c)
-{
-/*
- * General Systems BIOSen alias the cpu frequency registers
- * of the Elan at 0x000df000. Unfortuantly, one of the Linux
- * drivers subsequently pokes it, and changes the CPU speed.
- * Workaround : Remove the unneeded alias.
- */
-#define CBAR		(0xfffc) /* Configuration Base Address  (32-bit) */
-#define CBAR_ENB	(0x80000000)
-#define CBAR_KEY	(0X000000CB)
-	if (c->x86_model == 9 || c->x86_model == 10) {
-		if (inl (CBAR) & CBAR_ENB)
-			outl (0 | CBAR_KEY, CBAR);
-	}
-}
-
-
-static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-	int mbytes = num_physpages >> (20-PAGE_SHIFT);
-
-	if (c->x86_model < 6) {
-		/* Based on AMD doc 20734R - June 2000 */
-		if (c->x86_model == 0) {
-			clear_cpu_cap(c, X86_FEATURE_APIC);
-			set_cpu_cap(c, X86_FEATURE_PGE);
-		}
-		return;
-	}
-
-	if (c->x86_model == 6 && c->x86_mask == 1) {
-		const int K6_BUG_LOOP = 1000000;
-		int n;
-		void (*f_vide)(void);
-		unsigned long d, d2;
-
-		printk(KERN_INFO "AMD K6 stepping B detected - ");
-
-		/*
-		 * It looks like AMD fixed the 2.6.2 bug and improved indirect
-		 * calls at the same time.
-		 */
-
-		n = K6_BUG_LOOP;
-		f_vide = vide;
-		rdtscl(d);
-		while (n--)
-			f_vide();
-		rdtscl(d2);
-		d = d2-d;
-
-		if (d > 20*K6_BUG_LOOP)
-			printk("system stability may be impaired when more than 32 MB are used.\n");
-		else
-			printk("probably OK (after B9730xxxx).\n");
-		printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n");
-	}
-
-	/* K6 with old style WHCR */
-	if (c->x86_model < 8 ||
-	   (c->x86_model == 8 && c->x86_mask < 8)) {
-		/* We can only write allocate on the low 508Mb */
-		if (mbytes > 508)
-			mbytes = 508;
-
-		rdmsr(MSR_K6_WHCR, l, h);
-		if ((l&0x0000FFFF) == 0) {
-			unsigned long flags;
-			l = (1<<0)|((mbytes/4)<<1);
-			local_irq_save(flags);
-			wbinvd();
-			wrmsr(MSR_K6_WHCR, l, h);
-			local_irq_restore(flags);
-			printk(KERN_INFO "Enabling old style K6 write allocation for %d Mb\n",
-				mbytes);
-		}
-		return;
-	}
-
-	if ((c->x86_model == 8 && c->x86_mask > 7) ||
-	     c->x86_model == 9 || c->x86_model == 13) {
-		/* The more serious chips .. */
-
-		if (mbytes > 4092)
-			mbytes = 4092;
-
-		rdmsr(MSR_K6_WHCR, l, h);
-		if ((l&0xFFFF0000) == 0) {
-			unsigned long flags;
-			l = ((mbytes>>2)<<22)|(1<<16);
-			local_irq_save(flags);
-			wbinvd();
-			wrmsr(MSR_K6_WHCR, l, h);
-			local_irq_restore(flags);
-			printk(KERN_INFO "Enabling new style K6 write allocation for %d Mb\n",
-				mbytes);
-		}
-
-		return;
-	}
-
-	if (c->x86_model == 10) {
-		/* AMD Geode LX is model 10 */
-		/* placeholder for any needed mods */
-		return;
-	}
-}
-
-static void __cpuinit init_amd_k7(struct cpuinfo_x86 *c)
-{
-	u32 l, h;
-
-	/*
-	 * Bit 15 of Athlon specific MSR 15, needs to be 0
-	 * to enable SSE on Palomino/Morgan/Barton CPU's.
-	 * If the BIOS didn't enable it already, enable it here.
-	 */
-	if (c->x86_model >= 6 && c->x86_model <= 10) {
-		if (!cpu_has(c, X86_FEATURE_XMM)) {
-			printk(KERN_INFO "Enabling disabled K7/SSE Support.\n");
-			rdmsr(MSR_K7_HWCR, l, h);
-			l &= ~0x00008000;
-			wrmsr(MSR_K7_HWCR, l, h);
-			set_cpu_cap(c, X86_FEATURE_XMM);
-		}
-	}
-
-	/*
-	 * It's been determined by AMD that Athlons since model 8 stepping 1
-	 * are more robust with CLK_CTL set to 200xxxxx instead of 600xxxxx
-	 * As per AMD technical note 27212 0.2
-	 */
-	if ((c->x86_model == 8 && c->x86_mask >= 1) || (c->x86_model > 8)) {
-		rdmsr(MSR_K7_CLK_CTL, l, h);
-		if ((l & 0xfff00000) != 0x20000000) {
-			printk ("CPU: CLK_CTL MSR was %x. Reprogramming to %x\n", l,
-				((l & 0x000fffff)|0x20000000));
-			wrmsr(MSR_K7_CLK_CTL, (l & 0x000fffff)|0x20000000, h);
-		}
-	}
-
-	set_cpu_cap(c, X86_FEATURE_K7);
-}
-#endif
-
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-static int __cpuinit nearby_node(int apicid)
-{
-	int i, node;
-
-	for (i = apicid - 1; i >= 0; i--) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	for (i = apicid + 1; i < MAX_LOCAL_APIC; i++) {
-		node = apicid_to_node[i];
-		if (node != NUMA_NO_NODE && node_online(node))
-			return node;
-	}
-	return first_node(node_online_map); /* Shouldn't happen */
-}
-#endif
-
-/*
- * On a AMD dual core setup the lower bits of the APIC id distingush the cores.
- * Assumes number of cores is a power of two.
- */
-static void __cpuinit amd_detect_cmp(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_HT
-	unsigned bits;
-
-	bits = c->x86_coreid_bits;
-
-	/* Low order bits define the core id (index of core in socket) */
-	c->cpu_core_id = c->initial_apicid & ((1 << bits)-1);
-	/* Convert the initial APIC ID into the socket ID */
-	c->phys_proc_id = c->initial_apicid >> bits;
-#endif
-}
-
-static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
-{
-#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
-	int cpu = smp_processor_id();
-	int node;
-	unsigned apicid = hard_smp_processor_id();
-
-	node = c->phys_proc_id;
-	if (apicid_to_node[apicid] != NUMA_NO_NODE)
-		node = apicid_to_node[apicid];
-	if (!node_online(node)) {
-		/* Two possibilities here:
-		   - The CPU is missing memory and no node was created.
-		   In that case try picking one from a nearby CPU
-		   - The APIC IDs differ from the HyperTransport node IDs
-		   which the K8 northbridge parsing fills in.
-		   Assume they are all increased by a constant offset,
-		   but in the same order as the HT nodeids.
-		   If that doesn't result in a usable node fall back to the
-		   path for the previous case.  */
-
-		int ht_nodeid = c->initial_apicid;
-
-		if (ht_nodeid >= 0 &&
-		    apicid_to_node[ht_nodeid] != NUMA_NO_NODE)
-			node = apicid_to_node[ht_nodeid];
-		/* Pick a nearby node */
-		if (!node_online(node))
-			node = nearby_node(apicid);
-	}
-	numa_set_node(cpu, node);
-
-	printk(KERN_INFO "CPU %d/%x -> Node %d\n", cpu, apicid, node);
-#endif
-}
-
-static void __cpuinit early_init_amd_mc(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_X86_HT
-	unsigned bits, ecx;
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level < 0x80000008)
-		return;
-
-	ecx = cpuid_ecx(0x80000008);
-
-	c->x86_max_cores = (ecx & 0xff) + 1;
-
-	/* CPU telling us the core id bits shift? */
-	bits = (ecx >> 12) & 0xF;
-
-	/* Otherwise recompute */
-	if (bits == 0) {
-		while ((1 << bits) < c->x86_max_cores)
-			bits++;
-	}
-
-	c->x86_coreid_bits = bits;
-#endif
-}
-
-static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
-{
-	early_init_amd_mc(c);
-
-	/* c->x86_power is 8000_0007 edx. Bit 8 is constant TSC */
-	if (c->x86_power & (1<<8))
-		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
-
-#ifdef CONFIG_X86_64
-	set_cpu_cap(c, X86_FEATURE_SYSCALL32);
-#else
-	/*  Set MTRR capability flag if appropriate */
-	if (c->x86 == 5)
-		if (c->x86_model == 13 || c->x86_model == 9 ||
-		    (c->x86_model == 8 && c->x86_mask >= 8))
-			set_cpu_cap(c, X86_FEATURE_K6_MTRR);
-#endif
-}
-
-static void __cpuinit init_amd(struct cpuinfo_x86 *c)
-{
-#ifdef CONFIG_SMP
-	unsigned long long value;
-
-	/*
-	 * Disable TLB flush filter by setting HWCR.FFDIS on K8
-	 * bit 6 of msr C001_0015
-	 *
-	 * Errata 63 for SH-B3 steppings
-	 * Errata 122 for all steppings (F+ have it disabled by default)
-	 */
-	if (c->x86 == 0xf) {
-		rdmsrl(MSR_K7_HWCR, value);
-		value |= 1 << 6;
-		wrmsrl(MSR_K7_HWCR, value);
-	}
-#endif
-
-	early_init_amd(c);
-
-	/*
-	 * Bit 31 in normal CPUID used for nonstandard 3DNow ID;
-	 * 3DNow is IDd by bit 31 in extended CPUID (1*32+31) anyway
-	 */
-	clear_cpu_cap(c, 0*32+31);
-
-#ifdef CONFIG_X86_64
-	/* On C+ stepping K8 rep microcode works well for copy/memset */
-	if (c->x86 == 0xf) {
-		u32 level;
-
-		level = cpuid_eax(1);
-		if((level >= 0x0f48 && level < 0x0f50) || level >= 0x0f58)
-			set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-	}
-	if (c->x86 == 0x10 || c->x86 == 0x11)
-		set_cpu_cap(c, X86_FEATURE_REP_GOOD);
-#else
-
-	/*
-	 *	FIXME: We should handle the K5 here. Set up the write
-	 *	range and also turn on MSR 83 bits 4 and 31 (write alloc,
-	 *	no bus pipeline)
-	 */
-
-	switch (c->x86) {
-	case 4:
-		init_amd_k5(c);
-		break;
-	case 5:
-		init_amd_k6(c);
-		break;
-	case 6: /* An Athlon/Duron */
-		init_amd_k7(c);
-		break;
-	}
-
-	/* K6s reports MCEs but don't actually have all the MSRs */
-	if (c->x86 < 6)
-		clear_cpu_cap(c, X86_FEATURE_MCE);
-#endif
-
-	/* Enable workaround for FXSAVE leak */
-	if (c->x86 >= 6)
-		set_cpu_cap(c, X86_FEATURE_FXSAVE_LEAK);
-
-	if (!c->x86_model_id[0]) {
-		switch (c->x86) {
-		case 0xf:
-			/* Should distinguish Models here, but this is only
-			   a fallback anyways. */
-			strcpy(c->x86_model_id, "Hammer");
-			break;
-		}
-	}
-
-	display_cacheinfo(c);
-
-	/* Multi core CPU? */
-	if (c->extended_cpuid_level >= 0x80000008) {
-		amd_detect_cmp(c);
-		srat_detect_node(c);
-	}
-
-#ifdef CONFIG_X86_32
-	detect_ht(c);
-#endif
-
-	if (c->extended_cpuid_level >= 0x80000006) {
-		if ((c->x86 >= 0x0f) && (cpuid_edx(0x80000006) & 0xf000))
-			num_cache_leaves = 4;
-		else
-			num_cache_leaves = 3;
-	}
-
-	if (c->x86 >= 0xf && c->x86 <= 0x11)
-		set_cpu_cap(c, X86_FEATURE_K8);
-
-	if (cpu_has_xmm2) {
-		/* MFENCE stops RDTSC speculation */
-		set_cpu_cap(c, X86_FEATURE_MFENCE_RDTSC);
-	}
-
-#ifdef CONFIG_X86_64
-	if (c->x86 == 0x10) {
-		/* do this for boot cpu */
-		if (c == &boot_cpu_data)
-			check_enable_amd_mmconf_dmi();
-
-		fam10h_check_enable_mmcfg();
-	}
-
-	if (c == &boot_cpu_data && c->x86 >= 0xf && c->x86 <= 0x11) {
-		unsigned long long tseg;
-
-		/*
-		 * Split up direct mapping around the TSEG SMM area.
-		 * Don't do it for gbpages because there seems very little
-		 * benefit in doing so.
-		 */
-		if (!rdmsrl_safe(MSR_K8_TSEG_ADDR, &tseg)) {
-		    printk(KERN_DEBUG "tseg: %010llx\n", tseg);
-		    if ((tseg>>PMD_SHIFT) <
-				(max_low_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) ||
-			((tseg>>PMD_SHIFT) <
-				(max_pfn_mapped>>(PMD_SHIFT-PAGE_SHIFT)) &&
-			 (tseg>>PMD_SHIFT) >= (1ULL<<(32 - PMD_SHIFT))))
-			set_memory_4k((unsigned long)__va(tseg), 1);
-		}
-	}
-#endif
-}
-
-#ifdef CONFIG_X86_32
-static unsigned int __cpuinit amd_size_cache(struct cpuinfo_x86 *c, unsigned int size)
-{
-	/* AMD errata T13 (order #21922) */
-	if ((c->x86 == 6)) {
-		if (c->x86_model == 3 && c->x86_mask == 0)	/* Duron Rev A0 */
-			size = 64;
-		if (c->x86_model == 4 &&
-		    (c->x86_mask == 0 || c->x86_mask == 1))	/* Tbird rev A1/A2 */
-			size = 256;
-	}
-	return size;
-}
-#endif
-
-static struct cpu_dev amd_cpu_dev __cpuinitdata = {
-	.c_vendor	= "AMD",
-	.c_ident	= { "AuthenticAMD" },
-#ifdef CONFIG_X86_32
-	.c_models = {
-		{ .vendor = X86_VENDOR_AMD, .family = 4, .model_names =
-		  {
-			  [3] = "486 DX/2",
-			  [7] = "486 DX/2-WB",
-			  [8] = "486 DX/4",
-			  [9] = "486 DX/4-WB",
-			  [14] = "Am5x86-WT",
-			  [15] = "Am5x86-WB"
-		  }
-		},
-	},
-	.c_size_cache	= amd_size_cache,
-#endif
-	.c_early_init   = early_init_amd,
-	.c_init		= init_amd,
-	.c_x86_vendor	= X86_VENDOR_AMD,
-};
-
-cpu_dev_register(amd_cpu_dev);