hippi: Move the HIPPI driver
Move the HIPPI driver into drivers/net/hippi/ and make the
necessary Kconfig and Makefile changes.
CC: Jes Sorensen <jes@wildopensource.com>
CC: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
diff --git a/MAINTAINERS b/MAINTAINERS
index c5ec925..194095a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3049,6 +3049,7 @@
F: include/linux/hippidevice.h
F: include/linux/if_hippi.h
F: net/802/hippi.c
+F: drivers/net/hippi/
HOST AP DRIVER
M: Jouni Malinen <j@w1.fi>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index c5e2a38..1d8fa95 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -272,38 +272,6 @@
depends on RIONET
default "128"
-config HIPPI
- bool "HIPPI driver support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && INET && PCI
- help
- HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
- 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
- can run over copper (25m) or fiber (300m on multi-mode or 10km on
- single-mode). HIPPI networks are commonly used for clusters and to
- connect to super computers. If you are connected to a HIPPI network
- and have a HIPPI network card in your computer that you want to use
- under Linux, say Y here (you must also remember to enable the driver
- for your HIPPI card below). Most people will say N here.
-
-config ROADRUNNER
- tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
- depends on HIPPI && PCI
- help
- Say Y here if this is your PCI HIPPI network card.
-
- To compile this driver as a module, choose M here: the module
- will be called rrunner. If unsure, say N.
-
-config ROADRUNNER_LARGE_RINGS
- bool "Use large TX/RX rings (EXPERIMENTAL)"
- depends on ROADRUNNER
- help
- If you say Y here, the RoadRunner driver will preallocate up to 2 MB
- of additional memory to allow for fastest operation, both for
- transmitting and receiving. This memory cannot be used by any other
- kernel code or by user space programs. Say Y here only if you have
- the memory.
-
config PLIP
tristate "PLIP (parallel port) support"
depends on PARPORT
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index a397f1e..f64d02c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -13,7 +13,6 @@
# link order important here
#
obj-$(CONFIG_PLIP) += plip.o
-obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_RIONET) += rionet.o
#
@@ -39,6 +38,7 @@
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
obj-$(CONFIG_ETHERNET) += ethernet/
obj-$(CONFIG_FDDI) += fddi/
+obj-$(CONFIG_HIPPI) += hippi/
onj-$(CONFIG_PPP) += ppp/
obj-$(CONFIG_PPP_ASYNC) += ppp/
obj-$(CONFIG_PPP_BSDCOMP) += ppp/
diff --git a/drivers/net/hippi/Kconfig b/drivers/net/hippi/Kconfig
new file mode 100644
index 0000000..7393eb7
--- /dev/null
+++ b/drivers/net/hippi/Kconfig
@@ -0,0 +1,39 @@
+#
+# HIPPI network device configuration
+#
+
+config HIPPI
+ bool "HIPPI driver support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && INET && PCI
+ ---help---
+ HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and
+ 1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
+ can run over copper (25m) or fiber (300m on multi-mode or 10km on
+ single-mode). HIPPI networks are commonly used for clusters and to
+ connect to super computers. If you are connected to a HIPPI network
+ and have a HIPPI network card in your computer that you want to use
+ under Linux, say Y here (you must also remember to enable the driver
+ for your HIPPI card below). Most people will say N here.
+
+if HIPPI
+
+config ROADRUNNER
+ tristate "Essential RoadRunner HIPPI PCI adapter support (EXPERIMENTAL)"
+ depends on PCI
+ ---help---
+ Say Y here if this is your PCI HIPPI network card.
+
+ To compile this driver as a module, choose M here: the module
+ will be called rrunner. If unsure, say N.
+
+config ROADRUNNER_LARGE_RINGS
+ bool "Use large TX/RX rings (EXPERIMENTAL)"
+ depends on ROADRUNNER
+ ---help---
+ If you say Y here, the RoadRunner driver will preallocate up to 2 MB
+ of additional memory to allow for fastest operation, both for
+ transmitting and receiving. This memory cannot be used by any other
+ kernel code or by user space programs. Say Y here only if you have
+ the memory.
+
+endif /* HIPPI */
diff --git a/drivers/net/hippi/Makefile b/drivers/net/hippi/Makefile
new file mode 100644
index 0000000..b95d629
--- /dev/null
+++ b/drivers/net/hippi/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the HIPPI network device drivers.
+#
+
+obj-$(CONFIG_ROADRUNNER) += rrunner.o
diff --git a/drivers/net/rrunner.c b/drivers/net/hippi/rrunner.c
similarity index 100%
rename from drivers/net/rrunner.c
rename to drivers/net/hippi/rrunner.c
diff --git a/drivers/net/rrunner.h b/drivers/net/hippi/rrunner.h
similarity index 100%
rename from drivers/net/rrunner.h
rename to drivers/net/hippi/rrunner.h
