| /* |
| * linux/arch/alpha/kernel/sys_rx164.c |
| * |
| * Copyright (C) 1995 David A Rusling |
| * Copyright (C) 1996 Jay A Estabrook |
| * Copyright (C) 1998, 1999 Richard Henderson |
| * |
| * Code supporting the RX164 (PCA56+POLARIS). |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/types.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/pci.h> |
| #include <linux/init.h> |
| #include <linux/bitops.h> |
| |
| #include <asm/ptrace.h> |
| #include <asm/system.h> |
| #include <asm/dma.h> |
| #include <asm/irq.h> |
| #include <asm/mmu_context.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/core_polaris.h> |
| #include <asm/tlbflush.h> |
| |
| #include "proto.h" |
| #include "irq_impl.h" |
| #include "pci_impl.h" |
| #include "machvec_impl.h" |
| |
| |
| /* Note mask bit is true for ENABLED irqs. */ |
| static unsigned long cached_irq_mask; |
| |
| static inline void |
| rx164_update_irq_hw(unsigned long mask) |
| { |
| volatile unsigned int *irq_mask; |
| |
| irq_mask = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x74); |
| *irq_mask = mask; |
| mb(); |
| *irq_mask; |
| } |
| |
| static inline void |
| rx164_enable_irq(struct irq_data *d) |
| { |
| rx164_update_irq_hw(cached_irq_mask |= 1UL << (d->irq - 16)); |
| } |
| |
| static void |
| rx164_disable_irq(struct irq_data *d) |
| { |
| rx164_update_irq_hw(cached_irq_mask &= ~(1UL << (d->irq - 16))); |
| } |
| |
| static struct irq_chip rx164_irq_type = { |
| .name = "RX164", |
| .irq_unmask = rx164_enable_irq, |
| .irq_mask = rx164_disable_irq, |
| .irq_mask_ack = rx164_disable_irq, |
| }; |
| |
| static void |
| rx164_device_interrupt(unsigned long vector) |
| { |
| unsigned long pld; |
| volatile unsigned int *dirr; |
| long i; |
| |
| /* Read the interrupt summary register. On Polaris, this is |
| the DIRR register in PCI config space (offset 0x84). */ |
| dirr = (void *)(POLARIS_DENSE_CONFIG_BASE + 0x84); |
| pld = *dirr; |
| |
| /* |
| * Now for every possible bit set, work through them and call |
| * the appropriate interrupt handler. |
| */ |
| while (pld) { |
| i = ffz(~pld); |
| pld &= pld - 1; /* clear least bit set */ |
| if (i == 20) { |
| isa_no_iack_sc_device_interrupt(vector); |
| } else { |
| handle_irq(16+i); |
| } |
| } |
| } |
| |
| static void __init |
| rx164_init_irq(void) |
| { |
| long i; |
| |
| rx164_update_irq_hw(0); |
| for (i = 16; i < 40; ++i) { |
| irq_set_chip_and_handler(i, &rx164_irq_type, handle_level_irq); |
| irq_set_status_flags(i, IRQ_LEVEL); |
| } |
| |
| init_i8259a_irqs(); |
| common_init_isa_dma(); |
| |
| setup_irq(16+20, &isa_cascade_irqaction); |
| } |
| |
| |
| /* |
| * The RX164 changed its interrupt routing between pass1 and pass2... |
| * |
| * PASS1: |
| * |
| * Slot IDSEL INTA INTB INTC INTD |
| * 0 6 5 10 15 20 |
| * 1 7 4 9 14 19 |
| * 2 5 3 8 13 18 |
| * 3 9 2 7 12 17 |
| * 4 10 1 6 11 16 |
| * |
| * PASS2: |
| * Slot IDSEL INTA INTB INTC INTD |
| * 0 5 1 7 12 17 |
| * 1 6 2 8 13 18 |
| * 2 8 3 9 14 19 |
| * 3 9 4 10 15 20 |
| * 4 10 5 11 16 6 |
| * |
| */ |
| |
| /* |
| * IdSel |
| * 5 32 bit PCI option slot 0 |
| * 6 64 bit PCI option slot 1 |
| * 7 PCI-ISA bridge |
| * 7 64 bit PCI option slot 2 |
| * 9 32 bit PCI option slot 3 |
| * 10 PCI-PCI bridge |
| * |
| */ |
| |
| static int __init |
| rx164_map_irq(struct pci_dev *dev, u8 slot, u8 pin) |
| { |
| #if 0 |
| static char irq_tab_pass1[6][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { 16+3, 16+3, 16+8, 16+13, 16+18}, /* IdSel 5, slot 2 */ |
| { 16+5, 16+5, 16+10, 16+15, 16+20}, /* IdSel 6, slot 0 */ |
| { 16+4, 16+4, 16+9, 16+14, 16+19}, /* IdSel 7, slot 1 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 8, PCI/ISA bridge */ |
| { 16+2, 16+2, 16+7, 16+12, 16+17}, /* IdSel 9, slot 3 */ |
| { 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */ |
| }; |
| #else |
| static char irq_tab[6][5] __initdata = { |
| /*INT INTA INTB INTC INTD */ |
| { 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */ |
| { 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */ |
| { -1, -1, -1, -1, -1}, /* IdSel 7, PCI/ISA bridge */ |
| { 16+2, 16+2, 16+8, 16+13, 16+18}, /* IdSel 8, slot 2 */ |
| { 16+3, 16+3, 16+9, 16+14, 16+19}, /* IdSel 9, slot 3 */ |
| { 16+4, 16+4, 16+10, 16+15, 16+5}, /* IdSel 10, PCI-PCI */ |
| }; |
| #endif |
| const long min_idsel = 5, max_idsel = 10, irqs_per_slot = 5; |
| |
| /* JRP - Need to figure out how to distinguish pass1 from pass2, |
| and use the correct table. */ |
| return COMMON_TABLE_LOOKUP; |
| } |
| |
| |
| /* |
| * The System Vector |
| */ |
| |
| struct alpha_machine_vector rx164_mv __initmv = { |
| .vector_name = "RX164", |
| DO_EV5_MMU, |
| DO_DEFAULT_RTC, |
| DO_POLARIS_IO, |
| .machine_check = polaris_machine_check, |
| .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS, |
| .min_io_address = DEFAULT_IO_BASE, |
| .min_mem_address = DEFAULT_MEM_BASE, |
| |
| .nr_irqs = 40, |
| .device_interrupt = rx164_device_interrupt, |
| |
| .init_arch = polaris_init_arch, |
| .init_irq = rx164_init_irq, |
| .init_rtc = common_init_rtc, |
| .init_pci = common_init_pci, |
| .kill_arch = NULL, |
| .pci_map_irq = rx164_map_irq, |
| .pci_swizzle = common_swizzle, |
| }; |
| ALIAS_MV(rx164) |