OMAP3: PM: handle PER/NEON/CORE in idle
Expand the powerdomains handled in the idle path to include PER, NEON
and CORE. This includes properly clearing the previous powerstates,
linking NEON state to MPU state and calling the UART prepare functions
for only the appropraite powerdomain transitions (CORE for UART1,2,
PER for UART3.)
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index b88da1b..05ee05f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -49,7 +49,10 @@
static void (*_omap_sram_idle)(u32 *addr, int save_state);
-static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
+static struct powerdomain *core_pwrdm, *per_pwrdm;
+
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
/*
* PRCM Interrupt Handler Helper Function
@@ -169,13 +172,22 @@
/* save_state = 1 => Only L1 and logic lost */
/* save_state = 2 => Only L2 lost */
/* save_state = 3 => L1, L2 and logic lost */
- int save_state = 0, mpu_next_state;
+ int save_state = 0;
+ int mpu_next_state = PWRDM_POWER_ON;
+ int per_next_state = PWRDM_POWER_ON;
+ int core_next_state = PWRDM_POWER_ON;
if (!_omap_sram_idle)
return;
+ pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
+ pwrdm_clear_all_prev_pwrst(neon_pwrdm);
+ pwrdm_clear_all_prev_pwrst(core_pwrdm);
+ pwrdm_clear_all_prev_pwrst(per_pwrdm);
+
mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
switch (mpu_next_state) {
+ case PWRDM_POWER_ON:
case PWRDM_POWER_RET:
/* No need to save context */
save_state = 0;
@@ -187,18 +199,37 @@
}
pwrdm_pre_transition();
- omap2_gpio_prepare_for_retention();
- omap_uart_prepare_idle(0);
- omap_uart_prepare_idle(1);
- omap_uart_prepare_idle(2);
+ /* NEON control */
+ if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
+ set_pwrdm_state(neon_pwrdm, mpu_next_state);
+
+ /* CORE & PER */
+ core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+ if (core_next_state < PWRDM_POWER_ON) {
+ omap2_gpio_prepare_for_retention();
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ /* PER changes only with core */
+ per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
+ if (per_next_state < PWRDM_POWER_ON)
+ omap_uart_prepare_idle(2);
+ /* Enable IO-PAD wakeup */
+ prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+ }
_omap_sram_idle(NULL, save_state);
cpu_init();
- omap_uart_resume_idle(2);
- omap_uart_resume_idle(1);
- omap_uart_resume_idle(0);
- omap2_gpio_resume_after_retention();
+ if (core_next_state < PWRDM_POWER_ON) {
+ if (per_next_state < PWRDM_POWER_ON)
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+
+ /* Disable IO-PAD wakeup */
+ prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+ omap2_gpio_resume_after_retention();
+ }
pwrdm_post_transition();
@@ -792,6 +823,10 @@
goto err2;
}
+ neon_pwrdm = pwrdm_lookup("neon_pwrdm");
+ per_pwrdm = pwrdm_lookup("per_pwrdm");
+ core_pwrdm = pwrdm_lookup("core_pwrdm");
+
omap_push_sram_idle();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
@@ -799,6 +834,15 @@
pm_idle = omap3_pm_idle;
+ pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
+ /*
+ * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
+ * IO-pad wakeup. Otherwise it will unnecessarily waste power
+ * waking up PER with every CORE wakeup - see
+ * http://marc.info/?l=linux-omap&m=121852150710062&w=2
+ */
+ pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
+
err1:
return ret;
err2:
