/******************************************************************************/
/*                                                                            */
/* bypass library, Copyright (c) 2004 Silicom, Ltd                            */
/* Corporation.                                                               */
/*                                                                            */
/* This program is free software; you can redistribute it and/or modify       */
/* it under the terms of the GNU General Public License as published by       */
/* the Free Software Foundation, located in the file LICENSE.                 */
/*                                                                            */
/* Ver 1.0.0                                                                  */
/*                                                                            */
/* libbypass.h                                                                */
/*                                                                            */
/******************************************************************************/

/**
 * is_bypass - check if device is a Bypass controlling device
 * @if_index: network device index
 *
 * Output:
 *  1 -  if device is bypass controlling device,
 *  0 -  if device is bypass slave device
 * -1 -  device not support Bypass
 **/
int is_bypass_sd(int if_index);

/**
 * get_bypass_slave - get second port participate in the Bypass pair
 * @if_index: network device index
 *
 * Output:
 *  network device index of the slave device
 * -1 - on failure (device not support Bypass or it's a slave device)
 **/
int get_bypass_slave_sd(int if_index);

/**
 * get_bypass_caps - get second port participate in the Bypass pair
 * @if_index: network device index
 *
 * Output:
 * flags word on success;flag word is a 32-bit mask word with each bit defines
 * different capability as described bellow.
 * Value of 1 for supporting this feature. 0 for not supporting this feature.
 * -1 - on failure (if the device is not capable of the operation or not a
 *  Bypass device)
 * Bit	feature			description
 *
 * 0	BP_CAP			The interface is Bypass capable in general
 *
 * 1	BP_STATUS_CAP		The interface can report of the current Bypass
 *				mode
 *
 * 2	BP_STATUS_CHANGE_CAP	The interface can report on a change to bypass
 *				mode from the last time the mode was defined
 *
 * 3	SW_CTL_CAP		The interface is Software controlled capable for
 *				bypass/non bypass modes.
 *
 * 4	BP_DIS_CAP		The interface is capable of disabling the Bypass
 *				mode at all times.  This mode will retain its
 *				mode even during power loss and also after power
 *				recovery. This will overcome on any bypass
 *				operation due to watchdog timeout or set bypass
 *				command.
 *
 * 5	BP_DIS_STATUS_CAP	The interface can report of the current
 *				DIS_BP_CAP
 *
 * 6	STD_NIC_CAP		The interface is capable to be configured to
 *				operate as standard, non Bypass, NIC interface
 *				(have direct connection to interfaces at all
 *				power modes)
 *
 * 7	BP_PWOFF_NO_CAP		The interface can be in Bypass mode at power off
 *				state
 *
 * 8	BP_PWOFF_OFF_CAP	The interface can disconnect the Bypass mode at
 *				power off state without effecting all the other
 *				states of operation
 *
 * 9	BP_PWOFF_CTL_CAP	The behavior of the Bypass mode at Power-off
 *				state can be controlled by software without
 *				effecting any other state
 *
 *10  BP_PWUP_ON_CAP		The interface can be in Bypass mode when power
 *				is turned on (until the system take control of
 *				the bypass functionality)
 *
 *11	BP_PWUP_OFF_CAP		The interface can disconnect from Bypass mode
 *				when power is turned on (until the system take
 *				control of the bypass functionality)
 *
 *12	BP_PWUP_CTL_CAP		The behavior of the Bypass mode at Power-up can
 *				be controlled by software
 *
 *13	WD_CTL_CAP		The interface has watchdog capabilities to turn
 *				to Bypass mode when not reset for defined period
 *				of time.
 *
 *14	WD_STATUS_CAP		The interface can report on the watchdog status
 *				(Active/inactive)
 *
 *15	WD_TIMEOUT_CAP		The interface can report the time left till
 *				watchdog triggers to Bypass mode.
 *
 *16-31 RESERVED
 *
 * **/
int get_bypass_caps_sd(int if_index);

/**
 * get_wd_set_caps - Obtain watchdog timer setting capabilities
 * @if_index: network device index
 *
 * Output:
 *
 * Set of numbers defining the various parameters of the watchdog capable
 * to be set to as described bellow.
 * -1 - on failure (device not support Bypass or it's a slave device)
 *
 * Bit	feature	        description
 *
 * 0-3	WD_MIN_TIME	    The interface WD minimal time period  in 100mS units
 *
 * 4	WD_STEP_TIME	The steps of the WD timer in
 *                      0 - for linear steps (WD_MIN_TIME * X)
 *                      1 - for multiply by 2 from previous step
 *                          (WD_MIN_TIME * 2^X)
 *
 * 5-8	WD_STEP_COUNT	Number of steps the WD timer supports in 2^X
 *                      (X bit available for defining the value)
 *
 *
 *
 **/
int get_wd_set_caps_sd(int if_index);

/**
 * set_bypass - set Bypass state
 * @if_index: network device index of the controlling device
 * @bypass_mode:  bypass mode (1=on, 0=off)
 * Output:
 *  0 - on success
 * -1 - on failure (device not support Bypass or it's a slave device)
 **/
int set_bypass_sd(int if_index, int bypass_mode);

/**
 * get_bypass - Get Bypass mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support Bypass or it's a slave device)
 **/
int get_bypass_sd(int if_index);

/**
 * get_bypass_change - Get change of Bypass mode state from last status check
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support Bypass or it's a slave device)
 **/
int get_bypass_change_sd(int if_index);

/**
 * set_dis_bypass - Set Disable Bypass mode
 * @if_index: network device index of the controlling device
 * @dis_bypass: disable bypass(1=dis, 0=en)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int set_dis_bypass_sd(int if_index, int dis_bypass);

/**
 * get_dis_bypass - Get Disable Bypass mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (normal Bypass mode/ Disable bypass)
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int get_dis_bypass_sd(int if_index);

/**
 * set_bypass_pwoff - Set Bypass mode at power-off state
 * @if_index: network device index of the controlling device
 * @bypass_mode: bypass mode setting at power off state (1=BP en, 0=BP Dis)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int set_bypass_pwoff_sd(int if_index, int bypass_mode);

/**
 * get_bypass_pwoff - Get Bypass mode state at power-off state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (Disable bypass at power off state / normal Bypass mode)
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int get_bypass_pwoff_sd(int if_index);

/**
 * set_bypass_pwup - Set Bypass mode at power-up state
 * @if_index: network device index of the controlling device
 * @bypass_mode: bypass mode setting at power up state (1=BP en, 0=BP Dis)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int set_bypass_pwup_sd(int if_index, int bypass_mode);

/**
 * get_bypass_pwup - Get Bypass mode state at power-up state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (Disable bypass at power up state / normal Bypass mode)
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int get_bypass_pwup_sd(int if_index);

/**
 * set_bypass_wd - Set watchdog state
 * @if_index: network device index of the controlling device
 * @ms_timeout: requested timeout (in ms units), 0 for disabling the watchdog
 *              timer
 * @ms_timeout_set(output): requested timeout (in ms units), that the adapter
 *                          supports and will be used by the watchdog
 * Output:
 * 0  - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int set_bypass_wd_sd(int if_index, int ms_timeout, int *ms_timeout_set);

/**
 * get_bypass_wd - Get watchdog state
 * @if_index: network device index of the controlling device
 * @ms_timeout (output): WDT timeout (in ms units),
 *                       -1 for unknown wdt status
 *                        0 if WDT is disabled
 * Output:
 * 0  - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int get_bypass_wd_sd(int if_index, int *ms_timeout_set);

/**
 * get_wd_expire_time - Get watchdog expire
 * @if_index: network device index of the controlling device
 * @ms_time_left (output): time left till watchdog time expire,
 *                       -1 if WDT has expired
 *                       0  if WDT is disabled
 * Output:
 * 0  - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device or unknown wdt status)
 **/
int get_wd_expire_time_sd(int if_index, int *ms_time_left);

/**
 * reset_bypass_wd_timer - Reset watchdog timer
 * @if_index: network device index of the controlling device
 *
 * Output:
 * 1  - on success
 * 0 - watchdog is not configured
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device or unknown wdt status)
 **/
int reset_bypass_wd_timer_sd(int if_index);

/**
 * set_std_nic - Standard NIC mode of operation
 * @if_index: network device index of the controlling device
 * @nic_mode: 0/1 (Default Bypass mode / Standard NIC mode)
 *
 * Output:
 * 0  - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int set_std_nic_sd(int if_index, int nic_mode);

/**
 * get_std_nic - Get Standard NIC mode setting
 * @if_index: network device index of the controlling device
 *
 * Output:
 * 0/1 (Default Bypass mode / Standard NIC mode) on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass or it's a slave device)
 **/
int get_std_nic_sd(int if_index);

/**
 * set_tx - set transmitter enable/disable
 * @if_index: network device index of the controlling device
 * @tx_state: 0/1 (Transmit Disable / Transmit Enable)
 *
 * Output:
 * 0  - on success
 * -1 - on failure (device is not capable of the operation )
 **/
int set_tx_sd(int if_index, int tx_state);

/**
 * get_std_nic - get transmitter state (disable / enable)
 * @if_index: network device index of the controlling device
 *
 * Output:
 * 0/1 (ransmit Disable / Transmit Enable) on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  Bypass)
 **/
int get_tx_sd(int if_index);

/**
 * set_tap - set TAP state
 * @if_index: network device index of the controlling device
 * @tap_mode: 1 tap mode , 0 normal nic mode
 * Output:
 *  0 - on success
 * -1 - on failure (device not support TAP or it's a slave device)
 **/
int set_tap_sd(int if_index, int tap_mode);

/**
 * get_tap - Get TAP mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support TAP or it's a slave device)
 **/
int get_tap_sd(int if_index);

/**
 * get_tap_change - Get change of TAP mode state from last status check
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support TAP or it's a slave device)
 **/
int get_tap_change_sd(int if_index);

/**
 * set_dis_tap - Set Disable TAP mode
 * @if_index: network device index of the controlling device
 * @dis_tap: disable tap(1=dis, 0=en)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable of the operation or device not support
 *                  TAP or it's a slave device)
 **/
int set_dis_tap_sd(int if_index, int dis_tap);

/**
 * get_dis_tap - Get Disable TAP mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (normal TAP mode/ Disable TAP)
 * -1 - on failure (device is not capable of the operation or device not support
 *                  TAP or it's a slave device)
 **/
int get_dis_tap_sd(int if_index);

/**
 * set_tap_pwup - Set TAP mode at power-up state
 * @if_index: network device index of the controlling device
 * @bypass_mode: tap mode setting at power up state (1=TAP en, 0=TAP Dis)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable of the operation or device not
 *                  support TAP or it's a slave device)
 **/
int set_tap_pwup_sd(int if_index, int tap_mode);

/**
 * get_tap_pwup - Get TAP mode state at power-up state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (Disable TAP at power up state / normal TAP mode)
 * -1 - on failure (device is not capable of the operation or device not
 *                  support TAP or it's a slave device)
 **/
int get_tap_pwup_sd(int if_index);

/**
 * set_bp_disc - set Disconnect state
 * @if_index: network device index of the controlling device
 * @tap_mode: 1 disc mode , 0 non-disc mode
 * Output:
 *  0 - on success
 * -1 - on failure (device not support Disconnect or it's a slave device)
 **/
int set_bp_disc_sd(int if_index, int disc_mode);

/**
 * get_bp_disc - Get Disconnect mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support Disconnect or it's a slave device)
 **/
int get_bp_disc_sd(int if_index);

/**
 * get_bp_disc_change - Get change of Disconnect mode state from last status check
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support Disconnect or it's a slave device)
 **/
int get_bp_disc_change_sd(int if_index);

/**
 * set_bp_dis_disc - Set Disable Disconnect mode
 * @if_index: network device index of the controlling device
 * @dis_tap: disable tap(1=dis, 0=en)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable ofthe operation or device not
 *                  support Disconnect or it's a slave device)
 **/
int set_bp_dis_disc_sd(int if_index, int dis_disc);

/**
 * get_dis_tap - Get Disable Disconnect mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (normal Disconnect mode/ Disable Disconnect)
 * -1 - on failure (device is not capable of the operation or device not
 *                  support Disconnect or it's a slave device)
 **/
int get_bp_dis_disc_sd(int if_index);

/**
 * set_bp_disc_pwup - Set Disconnect mode at power-up state
 * @if_index: network device index of the controlling device
 * @disc_mode: tap mode setting at power up state (1=Disc en, 0=Disc Dis)
 * Output:
 *  0 - on success
 * -1 - on failure (device is not capable of the operation or device not
 *                  support Disconnect or it's a slave device)
 **/
int set_bp_disc_pwup_sd(int if_index, int disc_mode);

/**
 * get_bp_disc_pwup - Get Disconnect mode state at power-up state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - on success (Disable Disconnect at power up state / normal Disconnect
 *                    mode)
 * -1 - on failure (device is not capable of the operation or device not
 *                  support TAP or it's a slave device)
 **/
int get_bp_disc_pwup_sd(int if_index);

/**
 * set_wd_exp_mode - Set adapter state when WDT expired.
 * @if_index: network device index of the controlling device
 * @bypass_mode:  adapter mode (1=tap mode, 0=bypass mode)
 * Output:
 *  0 - on success
 * -1 - on failure (device not support Bypass or it's a slave device)
 **/
int set_wd_exp_mode_sd(int if_index, int bypass_mode);

/**
 * get_wd_exp_mode - Get adapter state when WDT expired.
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (bypass/tap) on success
 * -1 - on failure (device not support Bypass or it's a slave device)
 **/
int get_wd_exp_mode_sd(int if_index);

/**
 * set_wd_autoreset - reset WDT periodically.
 * @if_index: network device index of the controlling device
 * @bypass_mode:  adapter mode (1=tap mode, 0=bypass mode)
 * Output:
 * 1  - on success
 * -1 - on failure (device is not capable of the operation or device not
 *                  support Bypass or it's a slave device or unknown wdt
 *                  status)
 **/
int set_wd_autoreset_sd(int if_index, int time);

/**
 * set_wd_autoreset - reset WDT periodically.
 * @if_index: network device index of the controlling device
 * @bypass_mode:  adapter mode (1=tap mode, 0=bypass mode)
 * Output:
 * 1  - on success
 * -1 - on failure (device is not capable of the operation or device not
 *                  support Bypass or it's a slave device or unknown wdt
 *                  status)
 **/
int get_wd_autoreset_sd(int if_index);

/**
 * set_tpl - set TPL state
 * @if_index: network device index of the controlling device
 * @tpl_mode: 1 tpl mode , 0 normal nic mode
 * Output:
 *  0 - on success
 * -1 - on failure (device not support TPL)
 **/
int set_tpl_sd(int if_index, int tpl_mode);

/**
 * get_tpl - Get TPL mode state
 * @if_index: network device index of the controlling device
 * Output:
 *  0/1 - (off/on) on success
 * -1 - on failure (device not support TPL or it's a slave device)
 **/
int get_tpl_sd(int if_index);

int get_bypass_info_sd(int if_index, struct bp_info *bp_info);
int bp_if_scan_sd(void);
/*int get_dev_num_sd(void);*/