drm/nouveau: use drm debug levels
- Use driver level (0x2) for NV_DEBUG instead of all levels
- Create a NV_DEBUG_KMS for KMS level (0x4) and use them in modesetting code
- Remove a few odd NV_TRACE calls and replace some of them with NV_DEBUG_KMS or
NV_INFO
Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c
index de61f46..9e2926c 100644
--- a/drivers/gpu/drm/nouveau/nouveau_dp.c
+++ b/drivers/gpu/drm/nouveau/nouveau_dp.c
@@ -187,7 +187,7 @@
if (ret)
return false;
- NV_DEBUG(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]);
+ NV_DEBUG_KMS(dev, "\t\tadjust 0x%02x 0x%02x\n", request[0], request[1]);
/* Keep all lanes at the same level.. */
for (i = 0; i < nv_encoder->dp.link_nr; i++) {
@@ -228,7 +228,7 @@
int or = nv_encoder->or, link = !(nv_encoder->dcb->sorconf.link & 1);
int dpe_headerlen, ret, i;
- NV_DEBUG(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n",
+ NV_DEBUG_KMS(dev, "\t\tconfig 0x%02x 0x%02x 0x%02x 0x%02x\n",
config[0], config[1], config[2], config[3]);
dpe = nouveau_bios_dp_table(dev, nv_encoder->dcb, &dpe_headerlen);
@@ -276,12 +276,12 @@
bool cr_done, cr_max_vs, eq_done;
int ret = 0, i, tries, voltage;
- NV_DEBUG(dev, "link training!!\n");
+ NV_DEBUG_KMS(dev, "link training!!\n");
train:
cr_done = eq_done = false;
/* set link configuration */
- NV_DEBUG(dev, "\tbegin train: bw %d, lanes %d\n",
+ NV_DEBUG_KMS(dev, "\tbegin train: bw %d, lanes %d\n",
nv_encoder->dp.link_bw, nv_encoder->dp.link_nr);
ret = nouveau_dp_link_bw_set(encoder, nv_encoder->dp.link_bw);
@@ -297,7 +297,7 @@
return false;
/* clock recovery */
- NV_DEBUG(dev, "\tbegin cr\n");
+ NV_DEBUG_KMS(dev, "\tbegin cr\n");
ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_1);
if (ret)
goto stop;
@@ -314,7 +314,7 @@
ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 2);
if (ret)
break;
- NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n",
+ NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n",
status[0], status[1]);
cr_done = true;
@@ -346,7 +346,7 @@
goto stop;
/* channel equalisation */
- NV_DEBUG(dev, "\tbegin eq\n");
+ NV_DEBUG_KMS(dev, "\tbegin eq\n");
ret = nouveau_dp_link_train_set(encoder, DP_TRAINING_PATTERN_2);
if (ret)
goto stop;
@@ -357,7 +357,7 @@
ret = auxch_rd(encoder, DP_LANE0_1_STATUS, status, 3);
if (ret)
break;
- NV_DEBUG(dev, "\t\tstatus: 0x%02x 0x%02x\n",
+ NV_DEBUG_KMS(dev, "\t\tstatus: 0x%02x 0x%02x\n",
status[0], status[1]);
eq_done = true;
@@ -395,9 +395,9 @@
/* retry at a lower setting, if possible */
if (!ret && !(eq_done && cr_done)) {
- NV_DEBUG(dev, "\twe failed\n");
+ NV_DEBUG_KMS(dev, "\twe failed\n");
if (nv_encoder->dp.link_bw != DP_LINK_BW_1_62) {
- NV_DEBUG(dev, "retry link training at low rate\n");
+ NV_DEBUG_KMS(dev, "retry link training at low rate\n");
nv_encoder->dp.link_bw = DP_LINK_BW_1_62;
goto train;
}
@@ -418,7 +418,7 @@
if (ret)
return false;
- NV_DEBUG(dev, "encoder: link_bw %d, link_nr %d\n"
+ NV_DEBUG_KMS(dev, "encoder: link_bw %d, link_nr %d\n"
"display: link_bw %d, link_nr %d version 0x%02x\n",
nv_encoder->dcb->dpconf.link_bw,
nv_encoder->dcb->dpconf.link_nr,
@@ -446,7 +446,7 @@
uint32_t tmp, ctrl, stat = 0, data32[4] = {};
int ret = 0, i, index = auxch->rd;
- NV_DEBUG(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr);
+ NV_DEBUG_KMS(dev, "ch %d cmd %d addr 0x%x len %d\n", index, cmd, addr, data_nr);
tmp = nv_rd32(dev, NV50_AUXCH_CTRL(auxch->rd));
nv_wr32(dev, NV50_AUXCH_CTRL(auxch->rd), tmp | 0x00100000);
@@ -472,7 +472,7 @@
if (!(cmd & 1)) {
memcpy(data32, data, data_nr);
for (i = 0; i < 4; i++) {
- NV_DEBUG(dev, "wr %d: 0x%08x\n", i, data32[i]);
+ NV_DEBUG_KMS(dev, "wr %d: 0x%08x\n", i, data32[i]);
nv_wr32(dev, NV50_AUXCH_DATA_OUT(index, i), data32[i]);
}
}
@@ -504,7 +504,7 @@
if (cmd & 1) {
for (i = 0; i < 4; i++) {
data32[i] = nv_rd32(dev, NV50_AUXCH_DATA_IN(index, i));
- NV_DEBUG(dev, "rd %d: 0x%08x\n", i, data32[i]);
+ NV_DEBUG_KMS(dev, "rd %d: 0x%08x\n", i, data32[i]);
}
memcpy(data, data32, data_nr);
}
