ARM: add base support for Marvell Dove SoC
The Marvell Dove (88AP510) is a high-performance, highly integrated,
low power SoC with high-end ARM-compatible processor (known as PJ4),
graphics processing unit, high-definition video decoding acceleration
hardware, and a broad range of peripherals.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 0000000..214a4c3
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_CTRL_PCIE0_LINK 0x00000001
+#define CPU_RESET 0x00000002
+#define CPU_CTRL_PCIE1_LINK 0x00000008
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define FIQ_MASK_LOW_OFF 0x0008
+#define ENDPOINT_MASK_LOW_OFF 0x000c
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+#define FIQ_MASK_HIGH_OFF 0x0018
+#define ENDPOINT_MASK_HIGH_OFF 0x001c
+#define PCIE_INTERRUPT_MASK_OFF 0x0020
+
+#define IRQ_MASK_LOW (IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW (IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW (IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH (IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH (IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 0000000..9b89ec7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+ .macro addruart,rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1 @ MMU enabled?
+ ldreq \rx, =DOVE_SB_REGS_PHYS_BASE
+ ldrne \rx, =DOVE_SB_REGS_VIRT_BASE
+ orr \rx, \rx, #0x00012000
+ .endm
+
+#define UART_SHIFT 2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 0000000..f6a0839
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys virt size
+ * c8000000 fdb00000 1M Cryptographic SRAM
+ * e0000000 @runtime 128M PCIe-0 Memory space
+ * e8000000 @runtime 128M PCIe-1 Memory space
+ * f1000000 fde00000 8M on-chip south-bridge registers
+ * f1800000 fe600000 8M on-chip north-bridge registers
+ * f2000000 fee00000 1M PCIe-0 I/O space
+ * f2100000 fef00000 1M PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE 0xc8000000
+#define DOVE_CESA_VIRT_BASE 0xfdb00000
+#define DOVE_CESA_SIZE SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000
+#define DOVE_PCIE0_MEM_SIZE SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE 0xe8000000
+#define DOVE_PCIE1_MEM_SIZE SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE 0xf8000000
+#define DOVE_BOOTROM_SIZE SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE 0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE 0xfde00000
+#define DOVE_SB_REGS_SIZE SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE 0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE 0xfe600000
+#define DOVE_NB_REGS_SIZE SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE 0x00000000
+#define DOVE_PCIE0_IO_SIZE SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE 0x00100000
+#define DOVE_PCIE1_IO_SIZE SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1)
+#define DOVE_NAND_GPIO_EN (1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_TWSI_ENABLE_OPTION1 (1 << 7)
+#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_TWSI_ENABLE_OPTION2 (1 << 20)
+#define DOVE_TWSI_ENABLE_OPTION3 (1 << 21)
+#define DOVE_TWSI_OPTION3_GPIO (1 << 22)
+#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_ON_AU1 (1 << 0)
+#define DOVE_SSP_CLOCK_ENABLE (1 << 1)
+#define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 0000000..e84c78c
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+ .macro disable_fiq
+ .endm
+
+ .macro arch_ret_to_user, tmp1, tmp2
+ .endm
+
+ .macro get_irqnr_preamble, base, tmp
+ ldr \base, =IRQ_VIRT_BASE
+ .endm
+
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ @ check low interrupts
+ ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+ ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
+ mov \irqnr, #31
+ ands \irqstat, \irqstat, \tmp
+
+ @ if no low interrupts set, check high interrupts
+ ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+ ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
+ moveq \irqnr, #63
+ andeqs \irqstat, \irqstat, \tmp
+
+ @ find first active interrupt source
+ clzne \irqstat, \irqstat
+ subne \irqnr, \irqnr, \irqstat
+ .endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 0000000..0ee70ff
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h> /* cansleep wrappers */
+
+#define GPIO_MAX 64
+
+#define GPIO_BASE_LO (DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI (DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin) ((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin) (GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin) (GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin) (GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin) (GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin) (GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin) (GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin) (GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin) (GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+ if (pin < NR_GPIO_IRQS)
+ return pin + IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+ if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_GPIO_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 0000000..32b0826
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses() 1
+
+#define PCIBIOS_MIN_IO 0x1000
+#define PCIBIOS_MIN_MEM 0x01000000
+#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver. */
+#define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+ DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x) (((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+ DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 0000000..3b3e472
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+ DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a) (a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 0000000..4668146
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE 0
+#define IRQ_DOVE_H2C 1
+#define IRQ_DOVE_C2H 2
+#define IRQ_DOVE_NAND 3
+#define IRQ_DOVE_PDMA 4
+#define IRQ_DOVE_SPI1 5
+#define IRQ_DOVE_SPI0 6
+#define IRQ_DOVE_UART_0 7
+#define IRQ_DOVE_UART_1 8
+#define IRQ_DOVE_UART_2 9
+#define IRQ_DOVE_UART_3 10
+#define IRQ_DOVE_I2C 11
+#define IRQ_DOVE_GPIO_0_7 12
+#define IRQ_DOVE_GPIO_8_15 13
+#define IRQ_DOVE_GPIO_16_23 14
+#define IRQ_DOVE_PCIE0_ERR 15
+#define IRQ_DOVE_PCIE0 16
+#define IRQ_DOVE_PCIE1_ERR 17
+#define IRQ_DOVE_PCIE1 18
+#define IRQ_DOVE_I2S0 19
+#define IRQ_DOVE_I2S0_ERR 20
+#define IRQ_DOVE_I2S1 21
+#define IRQ_DOVE_I2S1_ERR 22
+#define IRQ_DOVE_USB_ERR 23
+#define IRQ_DOVE_USB0 24
+#define IRQ_DOVE_USB1 25
+#define IRQ_DOVE_GE00_RX 26
+#define IRQ_DOVE_GE00_TX 27
+#define IRQ_DOVE_GE00_MISC 28
+#define IRQ_DOVE_GE00_SUM 29
+#define IRQ_DOVE_GE00_ERR 30
+#define IRQ_DOVE_CRYPTO 31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97 32
+#define IRQ_DOVE_PMU 33
+#define IRQ_DOVE_CAM 34
+#define IRQ_DOVE_SDIO0 35
+#define IRQ_DOVE_SDIO1 36
+#define IRQ_DOVE_SDIO0_WAKEUP 37
+#define IRQ_DOVE_SDIO1_WAKEUP 38
+#define IRQ_DOVE_XOR_00 39
+#define IRQ_DOVE_XOR_01 40
+#define IRQ_DOVE_XOR0_ERR 41
+#define IRQ_DOVE_XOR_10 42
+#define IRQ_DOVE_XOR_11 43
+#define IRQ_DOVE_XOR1_ERR 44
+#define IRQ_DOVE_LCD_DCON 45
+#define IRQ_DOVE_LCD1 46
+#define IRQ_DOVE_LCD0 47
+#define IRQ_DOVE_GPU 48
+#define IRQ_DOVE_PERFORM_MNTR 49
+#define IRQ_DOVE_VPRO_DMA1 51
+#define IRQ_DOVE_SSP_TIMER 54
+#define IRQ_DOVE_SSP 55
+#define IRQ_DOVE_MC_L2_ERR 56
+#define IRQ_DOVE_CRYPTO_ERR 59
+#define IRQ_DOVE_GPIO_24_31 60
+#define IRQ_DOVE_HIGH_GPIO 61
+#define IRQ_DOVE_SATA 62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START 64
+#define NR_GPIO_IRQS 64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START (IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS 7
+#define IRQ_DOVE_RTC (IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS (IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver. */
+#define IRQ_AC97 IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver. */
+#define IRQ_DMA IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver */
+#define IRQ_NAND IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 0000000..d668720
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 0000000..3ad9f94
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38)
+#define CLOCK_GATING_USB0_MASK (1 << 0)
+#define CLOCK_GATING_USB1_MASK (1 << 1)
+#define CLOCK_GATING_GBE_MASK (1 << 2)
+#define CLOCK_GATING_SATA_MASK (1 << 3)
+#define CLOCK_GATING_PCIE0_MASK (1 << 4)
+#define CLOCK_GATING_PCIE1_MASK (1 << 5)
+#define CLOCK_GATING_SDIO0_MASK (1 << 8)
+#define CLOCK_GATING_SDIO1_MASK (1 << 9)
+#define CLOCK_GATING_NAND_MASK (1 << 10)
+#define CLOCK_GATING_CAMERA_MASK (1 << 11)
+#define CLOCK_GATING_I2S0_MASK (1 << 12)
+#define CLOCK_GATING_I2S1_MASK (1 << 13)
+#define CLOCK_GATING_CRYPTO_MASK (1 << 15)
+#define CLOCK_GATING_AC97_MASK (1 << 21)
+#define CLOCK_GATING_PDMA_MASK (1 << 22)
+#define CLOCK_GATING_XOR0_MASK (1 << 23)
+#define CLOCK_GATING_XOR1_MASK (1 << 24)
+#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30)
+
+#define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+ if (pin < NR_PMU_IRQS)
+ return pin + IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+ if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+ return irq - IRQ_DOVE_PMU_START;
+
+ return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 0000000..356afda
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+ cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+ /*
+ * Enable soft reset to assert RSTOUTn.
+ */
+ writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+ /*
+ * Assert soft reset.
+ */
+ writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+ while (1)
+ ;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 0000000..251d538
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE (100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 0000000..2c5cdd7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE 0x20
+
+static void putc(const char c)
+{
+ int i;
+
+ for (i = 0; i < 0x1000; i++) {
+ /* Transmit fifo not full? */
+ if (*UART_LSR & LSR_THRE)
+ break;
+ }
+
+ *UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 0000000..8b2c974
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END 0xfd800000
