diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 07a6355..e2e24b4 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -883,7 +883,7 @@
   </chapter>
 
   <chapter id="ataExceptions">
-     <title>ATA errors &amp; exceptions</title>
+     <title>ATA errors and exceptions</title>
 
   <para>
   This chapter tries to identify what error/exception conditions exist
diff --git a/Documentation/filesystems/ntfs.txt b/Documentation/filesystems/ntfs.txt
index 13ba649..8177906 100644
--- a/Documentation/filesystems/ntfs.txt
+++ b/Documentation/filesystems/ntfs.txt
@@ -457,6 +457,8 @@
 
 Note, a technical ChangeLog aimed at kernel hackers is in fs/ntfs/ChangeLog.
 
+2.1.28:
+	- Fix a deadlock.
 2.1.27:
 	- Implement page migration support so the kernel can move memory used
 	  by NTFS files and directories around for management purposes.
diff --git a/Documentation/hwmon/w83793 b/Documentation/hwmon/w83793
index 45e5408..51171a8 100644
--- a/Documentation/hwmon/w83793
+++ b/Documentation/hwmon/w83793
@@ -45,18 +45,14 @@
   temp5-6 have a 1 degree Celsiis resolution.
 
 * Temperature sensor types
-  Temp1-4 have 3 possible types. It can be read from (and written to)
+  Temp1-4 have 2 possible types. It can be read from (and written to)
   temp[1-4]_type.
-  - If the value of 0, the related temperature channel stops
-    monitoring.
   - If the value is 3, it starts monitoring using a remote termal diode
     (default).
-  - If the value is 5, it starts monitoring using the temperature sensor
-    in AMD CPU and get result by AMDSI.
   - If the value is 6, it starts monitoring using the temperature sensor
     in Intel CPU and get result by PECI.
   Temp5-6 can be connected to external thermistors (value of
-  temp[5-6]_type is 4). They can also be disabled (value is 0).
+  temp[5-6]_type is 4).
 
 * Alarm mechanism
   For voltage sensors, an alarm triggers if the measured value is below
diff --git a/Documentation/pci.txt b/Documentation/pci.txt
index 2b395e4..fd5028e 100644
--- a/Documentation/pci.txt
+++ b/Documentation/pci.txt
@@ -1,142 +1,231 @@
-			 How To Write Linux PCI Drivers
 
-		   by Martin Mares <mj@ucw.cz> on 07-Feb-2000
+			How To Write Linux PCI Drivers
+
+		by Martin Mares <mj@ucw.cz> on 07-Feb-2000
+	updated by Grant Grundler <grundler@parisc-linux.org> on 23-Dec-2006
 
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-The world of PCI is vast and it's full of (mostly unpleasant) surprises.
-Different PCI devices have different requirements and different bugs --
-because of this, the PCI support layer in Linux kernel is not as trivial
-as one would wish. This short pamphlet tries to help all potential driver
-authors find their way through the deep forests of PCI handling.
+The world of PCI is vast and full of (mostly unpleasant) surprises.
+Since each CPU architecture implements different chip-sets and PCI devices
+have different requirements (erm, "features"), the result is the PCI support
+in the Linux kernel is not as trivial as one would wish. This short paper
+tries to introduce all potential driver authors to Linux APIs for
+PCI device drivers.
+
+A more complete resource is the third edition of "Linux Device Drivers"
+by Jonathan Corbet, Alessandro Rubini, and Greg Kroah-Hartman.
+LDD3 is available for free (under Creative Commons License) from:
+
+	http://lwn.net/Kernel/LDD3/
+
+However, keep in mind that all documents are subject to "bit rot".
+Refer to the source code if things are not working as described here.
+
+Please send questions/comments/patches about Linux PCI API to the
+"Linux PCI" <linux-pci@atrey.karlin.mff.cuni.cz> mailing list.
+
 
 
 0. Structure of PCI drivers
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~
-There exist two kinds of PCI drivers: new-style ones (which leave most of
-probing for devices to the PCI layer and support online insertion and removal
-of devices [thus supporting PCI, hot-pluggable PCI and CardBus in a single
-driver]) and old-style ones which just do all the probing themselves. Unless
-you have a very good reason to do so, please don't use the old way of probing
-in any new code. After the driver finds the devices it wishes to operate
-on (either the old or the new way), it needs to perform the following steps:
+PCI drivers "discover" PCI devices in a system via pci_register_driver().
+Actually, it's the other way around. When the PCI generic code discovers
+a new device, the driver with a matching "description" will be notified.
+Details on this below.
+
+pci_register_driver() leaves most of the probing for devices to
+the PCI layer and supports online insertion/removal of devices [thus
+supporting hot-pluggable PCI, CardBus, and Express-Card in a single driver].
+pci_register_driver() call requires passing in a table of function
+pointers and thus dictates the high level structure of a driver.
+
+Once the driver knows about a PCI device and takes ownership, the
+driver generally needs to perform the following initialization:
 
 	Enable the device
-	Access device configuration space
-	Discover resources (addresses and IRQ numbers) provided by the device
-	Allocate these resources
-	Communicate with the device
+	Request MMIO/IOP resources
+	Set the DMA mask size (for both coherent and streaming DMA)
+	Allocate and initialize shared control data (pci_allocate_coherent())
+	Access device configuration space (if needed)
+	Register IRQ handler (request_irq())
+	Initialize non-PCI (i.e. LAN/SCSI/etc parts of the chip)
+	Enable DMA/processing engines
+
+When done using the device, and perhaps the module needs to be unloaded,
+the driver needs to take the follow steps:
+	Disable the device from generating IRQs
+	Release the IRQ (free_irq())
+	Stop all DMA activity
+	Release DMA buffers (both streaming and coherent)
+	Unregister from other subsystems (e.g. scsi or netdev)
+	Release MMIO/IOP resources
 	Disable the device
 
-Most of these topics are covered by the following sections, for the rest
-look at <linux/pci.h>, it's hopefully well commented.
+Most of these topics are covered in the following sections.
+For the rest look at LDD3 or <linux/pci.h> .
 
 If the PCI subsystem is not configured (CONFIG_PCI is not set), most of
-the functions described below are defined as inline functions either completely
-empty or just returning an appropriate error codes to avoid lots of ifdefs
-in the drivers.
+the PCI functions described below are defined as inline functions either
+completely empty or just returning an appropriate error codes to avoid
+lots of ifdefs in the drivers.
 
 
-1. New-style drivers
-~~~~~~~~~~~~~~~~~~~~
-The new-style drivers just call pci_register_driver during their initialization
-with a pointer to a structure describing the driver (struct pci_driver) which
-contains:
 
-	name		Name of the driver
+1. pci_register_driver() call
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PCI device drivers call pci_register_driver() during their
+initialization with a pointer to a structure describing the driver
+(struct pci_driver):
+
+	field name	Description
+	----------	------------------------------------------------------
 	id_table	Pointer to table of device ID's the driver is
 			interested in.  Most drivers should export this
 			table using MODULE_DEVICE_TABLE(pci,...).
-	probe		Pointer to a probing function which gets called (during
-			execution of pci_register_driver for already existing
-			devices or later if a new device gets inserted) for all
-			PCI devices which match the ID table and are not handled
-			by the other drivers yet. This function gets passed a
-			pointer to the pci_dev structure representing the device
-			and also which entry in the ID table did the device
-			match. It returns zero when the driver has accepted the
-			device or an error code (negative number) otherwise.
-			This function always gets called from process context,
-			so it can sleep.
-	remove		Pointer to a function which gets called whenever a
-			device being handled by this driver is removed (either
-			during deregistration of the driver or when it's
-			manually pulled out of a hot-pluggable slot). This
-			function always gets called from process context, so it
-			can sleep.
-	save_state	Save a device's state before it's suspend.
+
+	probe		This probing function gets called (during execution
+			of pci_register_driver() for already existing
+			devices or later if a new device gets inserted) for
+			all PCI devices which match the ID table and are not
+			"owned" by the other drivers yet. This function gets
+			passed a "struct pci_dev *" for each device whose
+			entry in the ID table matches the device. The probe
+			function returns zero when the driver chooses to
+			take "ownership" of the device or an error code
+			(negative number) otherwise.
+			The probe function always gets called from process
+			context, so it can sleep.
+
+	remove		The remove() function gets called whenever a device
+			being handled by this driver is removed (either during
+			deregistration of the driver or when it's manually
+			pulled out of a hot-pluggable slot).
+			The remove function always gets called from process
+			context, so it can sleep.
+
 	suspend		Put device into low power state.
+	suspend_late	Put device into low power state.
+
+	resume_early	Wake device from low power state.
 	resume		Wake device from low power state.
+
+		(Please see Documentation/power/pci.txt for descriptions
+		of PCI Power Management and the related functions.)
+
 	enable_wake	Enable device to generate wake events from a low power
 			state.
 
-			(Please see Documentation/power/pci.txt for descriptions
-			of PCI Power Management and the related functions)
+	shutdown	Hook into reboot_notifier_list (kernel/sys.c).
+			Intended to stop any idling DMA operations.
+			Useful for enabling wake-on-lan (NIC) or changing
+			the power state of a device before reboot.
+			e.g. drivers/net/e100.c.
 
-The ID table is an array of struct pci_device_id ending with a all-zero entry.
-Each entry consists of:
+	err_handler	See Documentation/pci-error-recovery.txt
 
-	vendor, device	Vendor and device ID to match (or PCI_ANY_ID)
+	multithread_probe	Enable multi-threaded probe/scan. Driver must
+			provide its own locking/syncronization for init
+			operations if this is enabled.
+
+
+The ID table is an array of struct pci_device_id entries ending with an
+all-zero entry.  Each entry consists of:
+
+	vendor,device	Vendor and device ID to match (or PCI_ANY_ID)
+
 	subvendor,	Subsystem vendor and device ID to match (or PCI_ANY_ID)
-	subdevice
-	class,		Device class to match. The class_mask tells which bits
-	class_mask	of the class are honored during the comparison.
+	subdevice,
+
+	class		Device class, subclass, and "interface" to match.
+			See Appendix D of the PCI Local Bus Spec or
+			include/linux/pci_ids.h for a full list of classes.
+			Most drivers do not need to specify class/class_mask
+			as vendor/device is normally sufficient.
+
+	class_mask	limit which sub-fields of the class field are compared.
+			See drivers/scsi/sym53c8xx_2/ for example of usage.
+
 	driver_data	Data private to the driver.
+			Most drivers don't need to use driver_data field.
+			Best practice is to use driver_data as an index
+			into a static list of equivalent device types,
+			instead of using it as a pointer.
 
-Most drivers don't need to use the driver_data field.  Best practice
-for use of driver_data is to use it as an index into a static list of
-equivalent device types, not to use it as a pointer.
 
-Have a table entry {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID}
-to have probe() called for every PCI device known to the system.
+Most drivers only need PCI_DEVICE() or PCI_DEVICE_CLASS() to set up
+a pci_device_id table.
 
-New PCI IDs may be added to a device driver at runtime by writing
-to the file /sys/bus/pci/drivers/{driver}/new_id.  When added, the
-driver will probe for all devices it can support.
+New PCI IDs may be added to a device driver pci_ids table at runtime
+as shown below:
 
 echo "vendor device subvendor subdevice class class_mask driver_data" > \
- /sys/bus/pci/drivers/{driver}/new_id
-where all fields are passed in as hexadecimal values (no leading 0x).
-Users need pass only as many fields as necessary; vendor, device,
-subvendor, and subdevice fields default to PCI_ANY_ID (FFFFFFFF),
-class and classmask fields default to 0, and driver_data defaults to
-0UL.  Device drivers must initialize use_driver_data in the dynids struct
-in their pci_driver struct prior to calling pci_register_driver in order
-for the driver_data field to get passed to the driver. Otherwise, only a
-0 is passed in that field.
+/sys/bus/pci/drivers/{driver}/new_id
+
+All fields are passed in as hexadecimal values (no leading 0x).
+Users need pass only as many fields as necessary:
+	o vendor, device, subvendor, and subdevice fields default
+	  to PCI_ANY_ID (FFFFFFFF),
+	o class and classmask fields default to 0
+	o driver_data defaults to 0UL.
+
+Once added, the driver probe routine will be invoked for any unclaimed
+PCI devices listed in its (newly updated) pci_ids list.
 
 When the driver exits, it just calls pci_unregister_driver() and the PCI layer
 automatically calls the remove hook for all devices handled by the driver.
 
+
+1.1 "Attributes" for driver functions/data
+
 Please mark the initialization and cleanup functions where appropriate
 (the corresponding macros are defined in <linux/init.h>):
 
 	__init		Initialization code. Thrown away after the driver
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
-	__devinit	Device initialization code. Identical to __init if
-			the kernel is not compiled with CONFIG_HOTPLUG, normal
-			function otherwise.
+
+
+	__devinit	Device initialization code.
+			Identical to __init if the kernel is not compiled
+			with CONFIG_HOTPLUG, normal function otherwise.
 	__devexit	The same for __exit.
 
-Tips:
-	The module_init()/module_exit() functions (and all initialization
-        functions called only from these) should be marked __init/exit.
-	The struct pci_driver shouldn't be marked with any of these tags.
-	The ID table array should be marked __devinitdata.
-	The probe() and remove() functions (and all initialization
-	functions called only from these) should be marked __devinit/exit.
-	If you are sure the driver is not a hotplug driver then use only 
-	__init/exit __initdata/exitdata.
+Tips on when/where to use the above attributes:
+	o The module_init()/module_exit() functions (and all
+	  initialization functions called _only_ from these)
+	  should be marked __init/__exit.
 
-        Pointers to functions marked as __devexit must be created using
-        __devexit_p(function_name).  That will generate the function
-        name or NULL if the __devexit function will be discarded.
+	o Do not mark the struct pci_driver.
+
+	o The ID table array should be marked __devinitdata.
+
+	o The probe() and remove() functions should be marked __devinit
+	  and __devexit respectively.  All initialization functions
+	  exclusively called by the probe() routine, can be marked __devinit.
+	  Ditto for remove() and __devexit.
+
+	o If mydriver_probe() is marked with __devinit(), then all address
+	  references to mydriver_probe must use __devexit_p(mydriver_probe)
+	  (in the struct pci_driver declaration for example).
+	  __devexit_p() will generate the function name _or_ NULL if the
+	  function will be discarded.  For an example, see drivers/net/tg3.c.
+
+	o Do NOT mark a function if you are not sure which mark to use.
+	  Better to not mark the function than mark the function wrong.
 
 
-2. How to find PCI devices manually (the old style)
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-PCI drivers not using the pci_register_driver() interface search
-for PCI devices manually using the following constructs:
+
+2. How to find PCI devices manually
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+PCI drivers should have a really good reason for not using the
+pci_register_driver() interface to search for PCI devices.
+The main reason PCI devices are controlled by multiple drivers
+is because one PCI device implements several different HW services.
+E.g. combined serial/parallel port/floppy controller.
+
+A manual search may be performed using the following constructs:
 
 Searching by vendor and device ID:
 
@@ -150,87 +239,311 @@
 
 Searching by both vendor/device and subsystem vendor/device ID:
 
-	pci_get_subsys(VENDOR_ID, DEVICE_ID, SUBSYS_VENDOR_ID, SUBSYS_DEVICE_ID, dev).
+	pci_get_subsys(VENDOR_ID,DEVICE_ID, SUBSYS_VENDOR_ID, SUBSYS_DEVICE_ID, dev).
 
-   You can use the constant PCI_ANY_ID as a wildcard replacement for
+You can use the constant PCI_ANY_ID as a wildcard replacement for
 VENDOR_ID or DEVICE_ID.  This allows searching for any device from a
 specific vendor, for example.
 
-   These functions are hotplug-safe. They increment the reference count on
+These functions are hotplug-safe. They increment the reference count on
 the pci_dev that they return. You must eventually (possibly at module unload)
 decrement the reference count on these devices by calling pci_dev_put().
 
 
-3. Enabling and disabling devices
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   Before you do anything with the device you've found, you need to enable
-it by calling pci_enable_device() which enables I/O and memory regions of
-the device, allocates an IRQ if necessary, assigns missing resources if
-needed and wakes up the device if it was in suspended state. Please note
-that this function can fail.
 
-   If you want to use the device in bus mastering mode, call pci_set_master()
-which enables the bus master bit in PCI_COMMAND register and also fixes
-the latency timer value if it's set to something bogus by the BIOS.
+3. Device Initialization Steps
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-   If you want to use the PCI Memory-Write-Invalidate transaction,
+As noted in the introduction, most PCI drivers need the following steps
+for device initialization:
+
+	Enable the device
+	Request MMIO/IOP resources
+	Set the DMA mask size (for both coherent and streaming DMA)
+	Allocate and initialize shared control data (pci_allocate_coherent())
+	Access device configuration space (if needed)
+	Register IRQ handler (request_irq())
+	Initialize non-PCI (i.e. LAN/SCSI/etc parts of the chip)
+	Enable DMA/processing engines.
+
+The driver can access PCI config space registers at any time.
+(Well, almost. When running BIST, config space can go away...but
+that will just result in a PCI Bus Master Abort and config reads
+will return garbage).
+
+
+3.1 Enable the PCI device
+~~~~~~~~~~~~~~~~~~~~~~~~~
+Before touching any device registers, the driver needs to enable
+the PCI device by calling pci_enable_device(). This will:
+	o wake up the device if it was in suspended state,
+	o allocate I/O and memory regions of the device (if BIOS did not),
+	o allocate an IRQ (if BIOS did not).
+
+NOTE: pci_enable_device() can fail! Check the return value.
+NOTE2: Also see pci_enable_device_bars() below. Drivers can
+    attempt to enable only a subset of BARs they need.
+
+[ OS BUG: we don't check resource allocations before enabling those
+  resources. The sequence would make more sense if we called
+  pci_request_resources() before calling pci_enable_device().
+  Currently, the device drivers can't detect the bug when when two
+  devices have been allocated the same range. This is not a common
+  problem and unlikely to get fixed soon.
+
+  This has been discussed before but not changed as of 2.6.19:
+	http://lkml.org/lkml/2006/3/2/194
+]
+
+pci_set_master() will enable DMA by setting the bus master bit
+in the PCI_COMMAND register. It also fixes the latency timer value if
+it's set to something bogus by the BIOS.
+
+If the PCI device can use the PCI Memory-Write-Invalidate transaction,
 call pci_set_mwi().  This enables the PCI_COMMAND bit for Mem-Wr-Inval
 and also ensures that the cache line size register is set correctly.
-Make sure to check the return value of pci_set_mwi(), not all architectures
-may support Memory-Write-Invalidate.
+Check the return value of pci_set_mwi() as not all architectures
+or chip-sets may support Memory-Write-Invalidate.
 
-   If your driver decides to stop using the device (e.g., there was an
-error while setting it up or the driver module is being unloaded), it
-should call pci_disable_device() to deallocate any IRQ resources, disable
-PCI bus-mastering, etc.  You should not do anything with the device after
+
+3.2 Request MMIO/IOP resources
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Memory (MMIO), and I/O port addresses should NOT be read directly
+from the PCI device config space. Use the values in the pci_dev structure
+as the PCI "bus address" might have been remapped to a "host physical"
+address by the arch/chip-set specific kernel support.
+
+See Documentation/IO-mapping.txt for how to access device registers
+or device memory.
+
+The device driver needs to call pci_request_region() to verify
+no other device is already using the same address resource.
+Conversely, drivers should call pci_release_region() AFTER
 calling pci_disable_device().
+The idea is to prevent two devices colliding on the same address range.
 
-4. How to access PCI config space
+[ See OS BUG comment above. Currently (2.6.19), The driver can only
+  determine MMIO and IO Port resource availability _after_ calling
+  pci_enable_device(). ]
+
+Generic flavors of pci_request_region() are request_mem_region()
+(for MMIO ranges) and request_region() (for IO Port ranges).
+Use these for address resources that are not described by "normal" PCI
+BARs.
+
+Also see pci_request_selected_regions() below.
+
+
+3.3 Set the DMA mask size
+~~~~~~~~~~~~~~~~~~~~~~~~~
+[ If anything below doesn't make sense, please refer to
+  Documentation/DMA-API.txt. This section is just a reminder that
+  drivers need to indicate DMA capabilities of the device and is not
+  an authoritative source for DMA interfaces. ]
+
+While all drivers should explicitly indicate the DMA capability
+(e.g. 32 or 64 bit) of the PCI bus master, devices with more than
+32-bit bus master capability for streaming data need the driver
+to "register" this capability by calling pci_set_dma_mask() with
+appropriate parameters.  In general this allows more efficient DMA
+on systems where System RAM exists above 4G _physical_ address.
+
+Drivers for all PCI-X and PCIe compliant devices must call
+pci_set_dma_mask() as they are 64-bit DMA devices.
+
+Similarly, drivers must also "register" this capability if the device
+can directly address "consistent memory" in System RAM above 4G physical
+address by calling pci_set_consistent_dma_mask().
+Again, this includes drivers for all PCI-X and PCIe compliant devices.
+Many 64-bit "PCI" devices (before PCI-X) and some PCI-X devices are
+64-bit DMA capable for payload ("streaming") data but not control
+("consistent") data.
+
+
+3.4 Setup shared control data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Once the DMA masks are set, the driver can allocate "consistent" (a.k.a. shared)
+memory.  See Documentation/DMA-API.txt for a full description of
+the DMA APIs. This section is just a reminder that it needs to be done
+before enabling DMA on the device.
+
+
+3.5 Initialize device registers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Some drivers will need specific "capability" fields programmed
+or other "vendor specific" register initialized or reset.
+E.g. clearing pending interrupts.
+
+
+3.6 Register IRQ handler
+~~~~~~~~~~~~~~~~~~~~~~~~
+While calling request_irq() is the the last step described here,
+this is often just another intermediate step to initialize a device.
+This step can often be deferred until the device is opened for use.
+
+All interrupt handlers for IRQ lines should be registered with IRQF_SHARED
+and use the devid to map IRQs to devices (remember that all PCI IRQ lines
+can be shared).
+
+request_irq() will associate an interrupt handler and device handle
+with an interrupt number. Historically interrupt numbers represent
+IRQ lines which run from the PCI device to the Interrupt controller.
+With MSI and MSI-X (more below) the interrupt number is a CPU "vector".
+
+request_irq() also enables the interrupt. Make sure the device is
+quiesced and does not have any interrupts pending before registering
+the interrupt handler.
+
+MSI and MSI-X are PCI capabilities. Both are "Message Signaled Interrupts"
+which deliver interrupts to the CPU via a DMA write to a Local APIC.
+The fundamental difference between MSI and MSI-X is how multiple
+"vectors" get allocated. MSI requires contiguous blocks of vectors
+while MSI-X can allocate several individual ones.
+
+MSI capability can be enabled by calling pci_enable_msi() or
+pci_enable_msix() before calling request_irq(). This causes
+the PCI support to program CPU vector data into the PCI device
+capability registers.
+
+If your PCI device supports both, try to enable MSI-X first.
+Only one can be enabled at a time.  Many architectures, chip-sets,
+or BIOSes do NOT support MSI or MSI-X and the call to pci_enable_msi/msix
+will fail. This is important to note since many drivers have
+two (or more) interrupt handlers: one for MSI/MSI-X and another for IRQs.
+They choose which handler to register with request_irq() based on the
+return value from pci_enable_msi/msix().
+
+There are (at least) two really good reasons for using MSI:
+1) MSI is an exclusive interrupt vector by definition.
+   This means the interrupt handler doesn't have to verify
+   its device caused the interrupt.
+
+2) MSI avoids DMA/IRQ race conditions. DMA to host memory is guaranteed
+   to be visible to the host CPU(s) when the MSI is delivered. This
+   is important for both data coherency and avoiding stale control data.
+   This guarantee allows the driver to omit MMIO reads to flush
+   the DMA stream.
+
+See drivers/infiniband/hw/mthca/ or drivers/net/tg3.c for examples
+of MSI/MSI-X usage.
+
+
+
+4. PCI device shutdown
+~~~~~~~~~~~~~~~~~~~~~~~
+
+When a PCI device driver is being unloaded, most of the following
+steps need to be performed:
+
+	Disable the device from generating IRQs
+	Release the IRQ (free_irq())
+	Stop all DMA activity
+	Release DMA buffers (both streaming and consistent)
+	Unregister from other subsystems (e.g. scsi or netdev)
+	Disable device from responding to MMIO/IO Port addresses
+	Release MMIO/IO Port resource(s)
+
+
+4.1 Stop IRQs on the device
+~~~~~~~~~~~~~~~~~~~~~~~~~~~
+How to do this is chip/device specific. If it's not done, it opens
+the possibility of a "screaming interrupt" if (and only if)
+the IRQ is shared with another device.
+
+When the shared IRQ handler is "unhooked", the remaining devices
+using the same IRQ line will still need the IRQ enabled. Thus if the
+"unhooked" device asserts IRQ line, the system will respond assuming
+it was one of the remaining devices asserted the IRQ line. Since none
+of the other devices will handle the IRQ, the system will "hang" until
+it decides the IRQ isn't going to get handled and masks the IRQ (100,000
+iterations later). Once the shared IRQ is masked, the remaining devices
+will stop functioning properly. Not a nice situation.
+
+This is another reason to use MSI or MSI-X if it's available.
+MSI and MSI-X are defined to be exclusive interrupts and thus
+are not susceptible to the "screaming interrupt" problem.
+
+
+4.2 Release the IRQ
+~~~~~~~~~~~~~~~~~~~
+Once the device is quiesced (no more IRQs), one can call free_irq().
+This function will return control once any pending IRQs are handled,
+"unhook" the drivers IRQ handler from that IRQ, and finally release
+the IRQ if no one else is using it.
+
+
+4.3 Stop all DMA activity
+~~~~~~~~~~~~~~~~~~~~~~~~~
+It's extremely important to stop all DMA operations BEFORE attempting
+to deallocate DMA control data. Failure to do so can result in memory
+corruption, hangs, and on some chip-sets a hard crash.
+
+Stopping DMA after stopping the IRQs can avoid races where the
+IRQ handler might restart DMA engines.
+
+While this step sounds obvious and trivial, several "mature" drivers
+didn't get this step right in the past.
+
+
+4.4 Release DMA buffers
+~~~~~~~~~~~~~~~~~~~~~~~
+Once DMA is stopped, clean up streaming DMA first.
+I.e. unmap data buffers and return buffers to "upstream"
+owners if there is one.
+
+Then clean up "consistent" buffers which contain the control data.
+
+See Documentation/DMA-API.txt for details on unmapping interfaces.
+
+
+4.5 Unregister from other subsystems
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Most low level PCI device drivers support some other subsystem
+like USB, ALSA, SCSI, NetDev, Infiniband, etc. Make sure your
+driver isn't losing resources from that other subsystem.
+If this happens, typically the symptom is an Oops (panic) when
+the subsystem attempts to call into a driver that has been unloaded.
+
+
+4.6 Disable Device from responding to MMIO/IO Port addresses
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+io_unmap() MMIO or IO Port resources and then call pci_disable_device().
+This is the symmetric opposite of pci_enable_device().
+Do not access device registers after calling pci_disable_device().
+
+
+4.7 Release MMIO/IO Port Resource(s)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Call pci_release_region() to mark the MMIO or IO Port range as available.
+Failure to do so usually results in the inability to reload the driver.
+
+
+
+5. How to access PCI config space
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   You can use pci_(read|write)_config_(byte|word|dword) to access the config
+
+You can use pci_(read|write)_config_(byte|word|dword) to access the config
 space of a device represented by struct pci_dev *. All these functions return 0
 when successful or an error code (PCIBIOS_...) which can be translated to a text
 string by pcibios_strerror. Most drivers expect that accesses to valid PCI
 devices don't fail.
 
-   If you don't have a struct pci_dev available, you can call
+If you don't have a struct pci_dev available, you can call
 pci_bus_(read|write)_config_(byte|word|dword) to access a given device
 and function on that bus.
 
-   If you access fields in the standard portion of the config header, please
+If you access fields in the standard portion of the config header, please
 use symbolic names of locations and bits declared in <linux/pci.h>.
 
-   If you need to access Extended PCI Capability registers, just call
+If you need to access Extended PCI Capability registers, just call
 pci_find_capability() for the particular capability and it will find the
 corresponding register block for you.
 
 
-5. Addresses and interrupts
-~~~~~~~~~~~~~~~~~~~~~~~~~~~
-   Memory and port addresses and interrupt numbers should NOT be read from the
-config space. You should use the values in the pci_dev structure as they might
-have been remapped by the kernel.
-
-   See Documentation/IO-mapping.txt for how to access device memory.
-
-   The device driver needs to call pci_request_region() to make sure
-no other device is already using the same resource. The driver is expected
-to determine MMIO and IO Port resource availability _before_ calling
-pci_enable_device().  Conversely, drivers should call pci_release_region()
-_after_ calling pci_disable_device(). The idea is to prevent two devices
-colliding on the same address range.
-
-Generic flavors of pci_request_region() are request_mem_region()
-(for MMIO ranges) and request_region() (for IO Port ranges).
-Use these for address resources that are not described by "normal" PCI
-interfaces (e.g. BAR).
-
-   All interrupt handlers should be registered with IRQF_SHARED and use the devid
-to map IRQs to devices (remember that all PCI interrupts are shared).
-
 
 6. Other interesting functions
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
 pci_find_slot()			Find pci_dev corresponding to given bus and
 				slot numbers.
 pci_set_power_state()		Set PCI Power Management state (0=D0 ... 3=D3)
@@ -247,11 +560,12 @@
 pci_clear_mwi()			Disable Memory-Write-Invalidate transactions.
 
 
+
 7. Miscellaneous hints
 ~~~~~~~~~~~~~~~~~~~~~~
-When displaying PCI slot names to the user (for example when a driver wants
-to tell the user what card has it found), please use pci_name(pci_dev)
-for this purpose.
+
+When displaying PCI device names to the user (for example when a driver wants
+to tell the user what card has it found), please use pci_name(pci_dev).
 
 Always refer to the PCI devices by a pointer to the pci_dev structure.
 All PCI layer functions use this identification and it's the only
@@ -259,31 +573,113 @@
 special purposes -- on systems with multiple primary buses their semantics
 can be pretty complex.
 
-If you're going to use PCI bus mastering DMA, take a look at
-Documentation/DMA-mapping.txt.
-
 Don't try to turn on Fast Back to Back writes in your driver.  All devices
 on the bus need to be capable of doing it, so this is something which needs
 to be handled by platform and generic code, not individual drivers.
 
 
+
 8. Vendor and device identifications
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-For the future, let's avoid adding device ids to include/linux/pci_ids.h.
 
-PCI_VENDOR_ID_xxx for vendors, and a hex constant for device ids.
+One is not not required to add new device ids to include/linux/pci_ids.h.
+Please add PCI_VENDOR_ID_xxx for vendors and a hex constant for device ids.
 
-Rationale:  PCI_VENDOR_ID_xxx constants are re-used, but device ids are not.
-    Further, device ids are arbitrary hex numbers, normally used only in a
-    single location, the pci_device_id table.
+PCI_VENDOR_ID_xxx constants are re-used. The device ids are arbitrary
+hex numbers (vendor controlled) and normally used only in a single
+location, the pci_device_id table.
+
+Please DO submit new vendor/device ids to pciids.sourceforge.net project.
+
+
 
 9. Obsolete functions
 ~~~~~~~~~~~~~~~~~~~~~
+
 There are several functions which you might come across when trying to
 port an old driver to the new PCI interface.  They are no longer present
 in the kernel as they aren't compatible with hotplug or PCI domains or
 having sane locking.
 
-pci_find_device()		Superseded by pci_get_device()
-pci_find_subsys()		Superseded by pci_get_subsys()
-pci_find_slot()			Superseded by pci_get_slot()
+pci_find_device()	Superseded by pci_get_device()
+pci_find_subsys()	Superseded by pci_get_subsys()
+pci_find_slot()		Superseded by pci_get_slot()
+
+
+The alternative is the traditional PCI device driver that walks PCI
+device lists. This is still possible but discouraged.
+
+
+
+10. pci_enable_device_bars() and Legacy I/O Port space
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Large servers may not be able to provide I/O port resources to all PCI
+devices. I/O Port space is only 64KB on Intel Architecture[1] and is
+likely also fragmented since the I/O base register of PCI-to-PCI
+bridge will usually be aligned to a 4KB boundary[2]. On such systems,
+pci_enable_device() and pci_request_region() will fail when
+attempting to enable I/O Port regions that don't have I/O Port
+resources assigned.
+
+Fortunately, many PCI devices which request I/O Port resources also
+provide access to the same registers via MMIO BARs. These devices can
+be handled without using I/O port space and the drivers typically
+offer a CONFIG_ option to only use MMIO regions
+(e.g. CONFIG_TULIP_MMIO). PCI devices typically provide I/O port
+interface for legacy OSes and will work when I/O port resources are not
+assigned. The "PCI Local Bus Specification Revision 3.0" discusses
+this on p.44, "IMPLEMENTATION NOTE".
+
+If your PCI device driver doesn't need I/O port resources assigned to
+I/O Port BARs, you should use pci_enable_device_bars() instead of
+pci_enable_device() in order not to enable I/O port regions for the
+corresponding devices. In addition, you should use
+pci_request_selected_regions() and pci_release_selected_regions()
+instead of pci_request_regions()/pci_release_regions() in order not to
+request/release I/O port regions for the corresponding devices.
+
+[1] Some systems support 64KB I/O port space per PCI segment.
+[2] Some PCI-to-PCI bridges support optional 1KB aligned I/O base.
+
+
+
+11. MMIO Space and "Write Posting"
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Converting a driver from using I/O Port space to using MMIO space
+often requires some additional changes. Specifically, "write posting"
+needs to be handled. Many drivers (e.g. tg3, acenic, sym53c8xx_2)
+already do this. I/O Port space guarantees write transactions reach the PCI
+device before the CPU can continue. Writes to MMIO space allow the CPU
+to continue before the transaction reaches the PCI device. HW weenies
+call this "Write Posting" because the write completion is "posted" to
+the CPU before the transaction has reached its destination.
+
+Thus, timing sensitive code should add readl() where the CPU is
+expected to wait before doing other work.  The classic "bit banging"
+sequence works fine for I/O Port space:
+
+       for (i = 8; --i; val >>= 1) {
+               outb(val & 1, ioport_reg);      /* write bit */
+               udelay(10);
+       }
+
+The same sequence for MMIO space should be:
+
+       for (i = 8; --i; val >>= 1) {
+               writeb(val & 1, mmio_reg);      /* write bit */
+               readb(safe_mmio_reg);           /* flush posted write */
+               udelay(10);
+       }
+
+It is important that "safe_mmio_reg" not have any side effects that
+interferes with the correct operation of the device.
+
+Another case to watch out for is when resetting a PCI device. Use PCI
+Configuration space reads to flush the writel(). This will gracefully
+handle the PCI master abort on all platforms if the PCI device is
+expected to not respond to a readl().  Most x86 platforms will allow
+MMIO reads to master abort (a.k.a. "Soft Fail") and return garbage
+(e.g. ~0). But many RISC platforms will crash (a.k.a."Hard Fail").
+
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index 7fb3b8a..69f016f 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -4,6 +4,12 @@
 (c) 2006 Secret Lab Technologies Ltd
 Grant Likely <grant.likely at secretlab.ca>
 
+********** DRAFT ***********
+* WARNING: Do not depend on the stability of these bindings just yet.
+* The MPC5200 device tree conventions are still in flux
+* Keep an eye on the linuxppc-dev mailing list for more details
+********** DRAFT ***********
+
 I - Introduction
 ================
 Boards supported by the arch/powerpc architecture require device tree be
diff --git a/Documentation/scsi/aacraid.txt b/Documentation/scsi/aacraid.txt
index 3367130..dc8e44fc 100644
--- a/Documentation/scsi/aacraid.txt
+++ b/Documentation/scsi/aacraid.txt
@@ -11,43 +11,42 @@
 Supported Cards/Chipsets
 -------------------------
 	PCI ID (pci.ids)	OEM	Product
-	9005:0283:9005:0283	Adaptec	Catapult (3210S with arc firmware)
-	9005:0284:9005:0284	Adaptec	Tomcat (3410S with arc firmware)
 	9005:0285:9005:0285	Adaptec	2200S (Vulcan)
 	9005:0285:9005:0286	Adaptec	2120S (Crusader)
 	9005:0285:9005:0287	Adaptec	2200S (Vulcan-2m)
 	9005:0285:9005:0288	Adaptec	3230S (Harrier)
 	9005:0285:9005:0289	Adaptec	3240S (Tornado)
 	9005:0285:9005:028a	Adaptec	2020ZCR (Skyhawk)
-	9005:0285:9005:028b	Adaptec 2025ZCR (Terminator)
+	9005:0285:9005:028b	Adaptec	2025ZCR (Terminator)
 	9005:0286:9005:028c	Adaptec	2230S (Lancer)
 	9005:0286:9005:028c	Adaptec	2230SLP (Lancer)
 	9005:0286:9005:028d	Adaptec	2130S (Lancer)
 	9005:0285:9005:028e	Adaptec	2020SA (Skyhawk)
-	9005:0285:9005:028f	Adaptec 2025SA (Terminator)
+	9005:0285:9005:028f	Adaptec	2025SA (Terminator)
 	9005:0285:9005:0290	Adaptec	2410SA (Jaguar)
-	9005:0285:103c:3227	Adaptec 2610SA (Bearcat HP release)
-	9005:0285:9005:0293	Adaptec 21610SA (Corsair-16)
+	9005:0285:103c:3227	Adaptec	2610SA (Bearcat HP release)
+	9005:0285:9005:0293	Adaptec	21610SA (Corsair-16)
 	9005:0285:9005:0296	Adaptec	2240S (SabreExpress)
 	9005:0285:9005:0292	Adaptec	2810SA (Corsair-8)
-	9005:0285:9005:0294	Adaptec	Prowler
-	9005:0285:9005:0297	Adaptec	4005SAS (AvonPark)
-	9005:0285:9005:0298	Adaptec	4000SAS (BlackBird)
+	9005:0285:9005:0297	Adaptec	4005 (AvonPark)
+	9005:0285:9005:0298	Adaptec	4000 (BlackBird)
 	9005:0285:9005:0299	Adaptec	4800SAS (Marauder-X)
 	9005:0285:9005:029a	Adaptec	4805SAS (Marauder-E)
 	9005:0286:9005:029b	Adaptec	2820SA (Intruder)
 	9005:0286:9005:029c	Adaptec	2620SA (Intruder)
 	9005:0286:9005:029d	Adaptec	2420SA (Intruder HP release)
-	9005:0286:9005:02a2	Adaptec	3800SAS (Hurricane44)
-	9005:0286:9005:02a7	Adaptec	3805SAS (Hurricane80)
-	9005:0286:9005:02a8	Adaptec	3400SAS (Hurricane40)
-	9005:0286:9005:02ac	Adaptec	1800SAS (Typhoon44)
-	9005:0286:9005:02b3	Adaptec	2400SAS (Hurricane40lm)
-	9005:0285:9005:02b5	Adaptec ASR5800 (Voodoo44)
-	9005:0285:9005:02b6	Adaptec ASR5805 (Voodoo80)
-	9005:0285:9005:02b7	Adaptec ASR5808 (Voodoo08)
+	9005:0286:9005:02ac	Adaptec	1800 (Typhoon44)
+	9005:0285:9005:02b5	Adaptec	5445 (Voodoo44)
+	9005:0285:9005:02b6	Adaptec	5805 (Voodoo80)
+	9005:0285:9005:02b7	Adaptec	5085 (Voodoo08)
+	9005:0285:9005:02bb	Adaptec	3405 (Marauder40LP)
+	9005:0285:9005:02bc	Adaptec	3805 (Marauder80LP)
+	9005:0285:9005:02c7	Adaptec	3085 (Marauder08ELP)
+	9005:0285:9005:02bd	Adaptec	31205 (Marauder120)
+	9005:0285:9005:02be	Adaptec	31605 (Marauder160)
+	9005:0285:9005:02c3	Adaptec	51205 (Voodoo120)
+	9005:0285:9005:02c4	Adaptec	51605 (Voodoo160)
 	1011:0046:9005:0364	Adaptec	5400S (Mustang)
-	1011:0046:9005:0365	Adaptec	5400S (Mustang)
 	9005:0287:9005:0800	Adaptec	Themisto (Jupiter)
 	9005:0200:9005:0200	Adaptec	Themisto (Jupiter)
 	9005:0286:9005:0800	Adaptec	Callisto (Jupiter)
@@ -68,21 +67,32 @@
 	9005:0285:17aa:0287	Legend	S230 (Vulcan)
 	9005:0285:9005:0290	IBM	ServeRAID 7t (Jaguar)
 	9005:0285:1014:02F2	IBM	ServeRAID 8i (AvonPark)
-	9005:0285:1014:0312	IBM	ServeRAID 8i (AvonParkLite)
 	9005:0286:1014:9540	IBM	ServeRAID 8k/8k-l4 (AuroraLite)
 	9005:0286:1014:9580	IBM	ServeRAID 8k/8k-l8 (Aurora)
-	9005:0286:1014:034d	IBM	ServeRAID 8s (Hurricane)
-	9005:0286:9005:029e	ICP	ICP9024R0 (Lancer)
-	9005:0286:9005:029f	ICP	ICP9014R0 (Lancer)
+	9005:0285:1014:034d	IBM	ServeRAID 8s (Marauder-E)
+	9005:0286:9005:029e	ICP	ICP9024RO (Lancer)
+	9005:0286:9005:029f	ICP	ICP9014RO (Lancer)
 	9005:0286:9005:02a0	ICP	ICP9047MA (Lancer)
 	9005:0286:9005:02a1	ICP	ICP9087MA (Lancer)
-	9005:0286:9005:02a3	ICP	ICP5445AU (Hurricane44)
-	9005:0286:9005:02a4	ICP	ICP9085LI (Marauder-X)
-	9005:0286:9005:02a5	ICP	ICP5085BR (Marauder-E)
+	9005:0285:9005:02a4	ICP	ICP9085LI (Marauder-X)
+	9005:0285:9005:02a5	ICP	ICP5085BR (Marauder-E)
 	9005:0286:9005:02a6	ICP	ICP9067MA (Intruder-6)
-	9005:0286:9005:02a9	ICP	ICP5085AU (Hurricane80)
-	9005:0286:9005:02aa	ICP	ICP5045AU (Hurricane40)
-	9005:0286:9005:02b4	ICP	ICP5045AL (Hurricane40lm)
+	9005:0285:9005:02b2	ICP	(Voodoo 8 internal 8 external)
+	9005:0285:9005:02b8	ICP	ICP5445SL (Voodoo44)
+	9005:0285:9005:02b9	ICP	ICP5085SL (Voodoo80)
+	9005:0285:9005:02ba	ICP	ICP5805SL (Voodoo08)
+	9005:0285:9005:02bf	ICP	ICP5045BL (Marauder40LP)
+	9005:0285:9005:02c0	ICP	ICP5085BL (Marauder80LP)
+	9005:0285:9005:02c8	ICP	ICP5805BL (Marauder08ELP)
+	9005:0285:9005:02c1	ICP	ICP5125BR (Marauder120)
+	9005:0285:9005:02c2	ICP	ICP5165BR (Marauder160)
+	9005:0285:9005:02c5	ICP	ICP5125SL (Voodoo120)
+	9005:0285:9005:02c6	ICP	ICP5165SL (Voodoo160)
+	9005:0286:9005:02ab		(Typhoon40)
+	9005:0286:9005:02ad		(Aurora ARK)
+	9005:0286:9005:02ae		(Aurora Lite ARK)
+	9005:0285:9005:02b0		(Sunrise Lake ARK)
+	9005:0285:9005:02b1	Adaptec	(Voodoo 8 internal 8 external)
 
 People
 -------------------------
diff --git a/MAINTAINERS b/MAINTAINERS
index 1b1491d..b0e3361 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3334,9 +3334,8 @@
 S:	Maintained
 
 USB HID/HIDBP DRIVERS
-P:	Vojtech Pavlik
-M:	vojtech@suse.cz
-L:	linux-usb-users@lists.sourceforge.net
+P:	Jiri Kosina
+M:	jkosina@suse.cz
 L:	linux-usb-devel@lists.sourceforge.net
 S:	Maintained
 
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 802febe..a8b3871 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -261,6 +261,7 @@
 		    }
 		}
 		write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_STLB);
+		ehb();
 
 		/*
 		 * Setup kernel data structures to use software total,
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 2e0e21e..65160d4 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -106,7 +106,6 @@
 		ENTER_CRITICAL(flags);
 		size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
 		size = (size + 1) >> 1;
-		local_irq_save(flags);
 		if (size <= current_cpu_data.tlbsize/2) {
 			int oldpid = read_c0_entryhi();
 			int newpid = cpu_asid(cpu, mm);
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index a8efb59..1868707 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -10,6 +10,12 @@
  * option) any later version.
  */
 
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
 / {
 	model = "Lite5200";
 	compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 1aabee4..5bb2760 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -10,6 +10,12 @@
  * option) any later version.
  */
 
+/*
+ * WARNING: Do not depend on this tree layout remaining static just yet.
+ * The MPC5200 device tree conventions are still in flux
+ * Keep an eye on the linuxppc-dev mailing list for more details
+ */
+
 / {
 	model = "Lite5200b";
 	compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index d1d2515..e956548 100644
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Tue Dec 19 14:59:53 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:12:56 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -245,7 +245,6 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCIEPORTBUS=y
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -854,7 +853,6 @@
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
-CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_HVC_DRIVER=y
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index fee72f8..029c9a0 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:22:54 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:12:58 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
 #
 CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
@@ -59,18 +63,22 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -79,12 +87,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -103,6 +111,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -124,13 +133,16 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
 CONFIG_PPC_CHRP=y
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
+CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
@@ -138,6 +150,8 @@
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
@@ -149,6 +163,7 @@
 CONFIG_HIGHMEM=y
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -161,6 +176,7 @@
 # CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -243,10 +259,13 @@
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -263,24 +282,29 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 
 #
@@ -306,7 +330,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -381,6 +404,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -407,7 +436,6 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -422,6 +450,7 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_IT821X is not set
@@ -430,6 +459,7 @@
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
@@ -445,6 +475,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -464,14 +496,16 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -487,12 +521,13 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_ATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -506,17 +541,18 @@
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_PAS16 is not set
 # CONFIG_SCSI_PSI240I is not set
 # CONFIG_SCSI_QLOGIC_FAS is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_SYM53C416 is not set
 # CONFIG_SCSI_DC395x is not set
@@ -525,6 +561,12 @@
 # CONFIG_SCSI_U14_34F is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Old CD-ROM drivers (not SCSI, not IDE)
@@ -557,6 +599,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -607,6 +650,7 @@
 # CONFIG_NET_ISA is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_AC3200 is not set
@@ -655,6 +699,7 @@
 # CONFIG_MV643XX_ETH_0 is not set
 # CONFIG_MV643XX_ETH_1 is not set
 # CONFIG_MV643XX_ETH_2 is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -663,6 +708,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -690,6 +736,7 @@
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
@@ -710,6 +757,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -732,6 +780,7 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -778,12 +827,14 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_BRIQ_PANEL=m
 # CONFIG_HVC_RTAS is not set
 
 #
@@ -802,10 +853,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -814,7 +861,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -881,6 +927,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -889,14 +936,9 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -909,6 +951,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
+CONFIG_FB_DDC=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -949,6 +992,7 @@
 # CONFIG_FB_3DFX_ACCEL is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -979,6 +1023,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -993,6 +1042,7 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1034,13 +1084,13 @@
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -1070,6 +1120,7 @@
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1087,6 +1138,7 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1094,12 +1146,13 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1157,6 +1210,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1166,6 +1223,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1173,6 +1231,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1207,8 +1266,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1308,17 +1369,22 @@
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1329,8 +1395,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1345,14 +1414,16 @@
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1367,7 +1438,11 @@
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_MANAGER=m
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
@@ -1376,6 +1451,10 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
 # CONFIG_CRYPTO_DES is not set
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 92d0a9d..7724847 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:22:55 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:15:04 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -10,6 +10,8 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -22,6 +24,8 @@
 CONFIG_PPC_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
@@ -30,6 +34,9 @@
 CONFIG_POWER4_ONLY=y
 CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -51,18 +58,22 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -71,12 +82,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -95,6 +106,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -114,23 +126,28 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_MAPLE is not set
+# CONFIG_PPC_PASEMI is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
-# CONFIG_UDBG_RTAS_CONSOLE is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
 CONFIG_U3_DART=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
 CONFIG_PPC_970_NAP=y
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -152,6 +169,7 @@
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -171,6 +189,7 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -225,6 +244,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -243,10 +263,13 @@
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -263,24 +286,29 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -307,7 +335,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -382,6 +409,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -408,7 +441,6 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -423,6 +455,7 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_IT821X is not set
@@ -431,6 +464,7 @@
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -448,6 +482,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -467,14 +503,16 @@
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -487,17 +525,42 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
 CONFIG_ATA=y
 # CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SVW=y
-# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
 # CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
@@ -507,22 +570,40 @@
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -537,6 +618,7 @@
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -591,11 +673,13 @@
 CONFIG_ADB_PMU=y
 # CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
+CONFIG_MAC_EMUMOUSEBTN=y
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
 CONFIG_WINDFARM_PM81=y
 CONFIG_WINDFARM_PM91=y
 CONFIG_WINDFARM_PM112=y
+# CONFIG_PMAC_RACKMETER is not set
 
 #
 # Network device support
@@ -652,7 +736,7 @@
 # CONFIG_SK98LIN is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -661,6 +745,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -691,6 +776,7 @@
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
@@ -711,6 +797,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
 
 #
 # Userland interfaces
@@ -733,6 +820,7 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -789,13 +877,7 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_AGP=m
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
@@ -806,7 +888,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -871,6 +952,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -879,14 +961,9 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -899,6 +976,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
+CONFIG_FB_DDC=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -930,6 +1008,7 @@
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -1080,6 +1159,11 @@
 # CONFIG_SOUND_PRIME is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1094,6 +1178,7 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1135,18 +1220,19 @@
 CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_STORAGE_ALAUDA is not set
 # CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 CONFIG_HID_FF=y
 CONFIG_HID_PID=y
 CONFIG_LOGITECH_FF=y
 CONFIG_THRUSTMASTER_FF=y
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_HIDDEV=y
 # CONFIG_USB_AIPTEK is not set
 # CONFIG_USB_WACOM is not set
@@ -1174,12 +1260,14 @@
 CONFIG_USB_KAWETH=m
 CONFIG_USB_PEGASUS=m
 CONFIG_USB_RTL8150=m
+# CONFIG_USB_USBNET_MII is not set
 CONFIG_USB_USBNET=m
 # CONFIG_USB_NET_AX8817X is not set
 CONFIG_USB_NET_CDCETHER=m
 # CONFIG_USB_NET_GL620A is not set
 # CONFIG_USB_NET_NET1080 is not set
 # CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 # CONFIG_USB_NET_ZAURUS is not set
@@ -1194,6 +1282,7 @@
 #
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
@@ -1228,6 +1317,8 @@
 CONFIG_USB_SERIAL_KLSI=m
 CONFIG_USB_SERIAL_KOBIL_SCT=m
 CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=m
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1239,6 +1330,7 @@
 CONFIG_USB_SERIAL_XIRCOM=m
 # CONFIG_USB_SERIAL_OPTION is not set
 CONFIG_USB_SERIAL_OMNINET=m
+# CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
 
 #
@@ -1246,6 +1338,7 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1253,12 +1346,13 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1316,6 +1410,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1328,6 +1426,7 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1344,6 +1443,7 @@
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1380,8 +1480,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
@@ -1505,17 +1607,22 @@
 CONFIG_NLS_UTF8=y
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1528,8 +1635,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1543,9 +1653,10 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
@@ -1565,7 +1676,12 @@
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1574,9 +1690,14 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index b500550..5fc8744 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc1
-# Fri Oct  6 13:25:04 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:16:44 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -10,6 +10,8 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -23,6 +25,7 @@
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
@@ -32,6 +35,9 @@
 CONFIG_POWER3=y
 CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -63,12 +69,13 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -125,18 +132,22 @@
 # CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
 CONFIG_PPC_ISERIES=y
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_PS3 is not set
 # CONFIG_U3_DART is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_IBMVIO=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
+CONFIG_PPC_INDIRECT_IO=y
+CONFIG_GENERIC_IOMAP=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 # CONFIG_MPIC is not set
@@ -146,6 +157,7 @@
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -178,6 +190,7 @@
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
+# CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
@@ -192,7 +205,6 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -245,6 +257,7 @@
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -261,21 +274,37 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 # CONFIG_NETFILTER_XT_MATCH_ESP is not set
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -286,27 +315,17 @@
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -317,23 +336,25 @@
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -440,6 +461,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -449,6 +476,7 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
@@ -469,6 +497,7 @@
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
@@ -515,6 +544,7 @@
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -562,6 +592,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -647,6 +678,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -765,10 +797,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
@@ -779,7 +807,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -795,6 +822,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -803,11 +831,6 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
@@ -822,6 +845,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -830,6 +854,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+# CONFIG_HID is not set
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -892,6 +921,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -904,6 +937,7 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -937,6 +971,7 @@
 CONFIG_AUTOFS_FS=m
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
 
 #
 # CD-ROM/DVD Filesystems
@@ -1024,7 +1059,6 @@
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
 # CONFIG_9P_FS is not set
-CONFIG_GENERIC_ACL=y
 
 #
 # Partition Types
@@ -1080,6 +1114,8 @@
 # Distributed Lock Manager
 #
 CONFIG_DLM=m
+CONFIG_DLM_TCP=y
+# CONFIG_DLM_SCTP is not set
 # CONFIG_DLM_DEBUG is not set
 
 #
@@ -1094,6 +1130,7 @@
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1105,6 +1142,7 @@
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1119,6 +1157,8 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1132,8 +1172,8 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_FORCED_INLINING is not set
@@ -1142,6 +1182,7 @@
 CONFIG_DEBUG_STACK_USAGE=y
 # CONFIG_DEBUGGER is not set
 CONFIG_IRQSTACKS=y
+# CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
 #
@@ -1155,10 +1196,11 @@
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1167,8 +1209,10 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 23fd210..405c1c9 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc4
-# Wed Nov 15 20:36:30 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:17:58 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -22,13 +23,13 @@
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
 #
 CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
@@ -69,12 +70,13 @@
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -130,6 +132,7 @@
 # CONFIG_PPC_MULTIPLATFORM is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_APUS is not set
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_RTAS is not set
@@ -166,7 +169,6 @@
 # CONFIG_TQM8260 is not set
 # CONFIG_ADS8272 is not set
 # CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
 # CONFIG_EV64360 is not set
 CONFIG_PPC_GEN550=y
 CONFIG_MPC10X_BRIDGE=y
@@ -181,6 +183,7 @@
 # CONFIG_HIGHMEM is not set
 CONFIG_HZ_100=y
 # CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=100
 CONFIG_PREEMPT_NONE=y
@@ -217,7 +220,6 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -286,6 +288,7 @@
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -302,18 +305,35 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
 CONFIG_NETFILTER_XT_MATCH_ESP=m
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
@@ -324,27 +344,17 @@
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 # CONFIG_NETFILTER_XT_MATCH_STRING is not set
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
@@ -355,22 +365,25 @@
 # CONFIG_IP_NF_MATCH_TTL is not set
 # CONFIG_IP_NF_MATCH_OWNER is not set
 # CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 # CONFIG_IP_NF_TARGET_LOG is not set
 # CONFIG_IP_NF_TARGET_ULOG is not set
 # CONFIG_IP_NF_TARGET_TCPMSS is not set
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -580,6 +593,7 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -599,6 +613,7 @@
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
@@ -646,6 +661,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -683,6 +699,7 @@
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
@@ -726,6 +743,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -777,6 +795,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -899,6 +918,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -921,10 +941,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -1032,6 +1048,7 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -1042,6 +1059,7 @@
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -1063,6 +1081,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Console display driver support
@@ -1077,6 +1096,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1091,6 +1115,7 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1170,6 +1195,7 @@
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1218,6 +1244,7 @@
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
@@ -1324,6 +1351,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1398,7 +1429,6 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1488,8 +1518,14 @@
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1497,6 +1533,7 @@
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1511,6 +1548,8 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1524,12 +1563,11 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
@@ -1551,6 +1589,7 @@
 CONFIG_CRYPTO_BLKCIPHER=y
 CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1559,8 +1598,10 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
diff --git a/arch/powerpc/configs/lite5200_defconfig b/arch/powerpc/configs/lite5200_defconfig
index ee76557..8cbd87d 100644
--- a/arch/powerpc/configs/lite5200_defconfig
+++ b/arch/powerpc/configs/lite5200_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Mon Nov 27 11:08:20 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:18:18 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -22,13 +23,13 @@
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
 #
 CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
@@ -68,6 +69,7 @@
 # CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -151,6 +153,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -259,6 +262,7 @@
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -374,6 +378,7 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
 
@@ -393,6 +398,7 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
@@ -440,6 +446,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -477,7 +484,7 @@
 # CONFIG_PATA_IT821X is not set
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
-CONFIG_PATA_MPC52xx=y
+# CONFIG_PATA_MARVELL is not set
 # CONFIG_PATA_MPIIX is not set
 # CONFIG_PATA_OLDPIIX is not set
 # CONFIG_PATA_NETCELL is not set
@@ -494,6 +501,7 @@
 # CONFIG_PATA_SIS is not set
 # CONFIG_PATA_VIA is not set
 # CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -521,6 +529,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -572,6 +581,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -632,6 +642,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_MPC52xx=y
@@ -657,10 +668,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -707,6 +714,7 @@
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -777,6 +785,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -873,6 +885,11 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
@@ -880,6 +897,7 @@
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -893,6 +911,8 @@
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -906,12 +926,11 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig
index ae96a5b..de97f2f 100644
--- a/arch/powerpc/configs/maple_defconfig
+++ b/arch/powerpc/configs/maple_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Mon Oct  9 11:59:34 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:19:02 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -10,6 +10,8 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -23,6 +25,7 @@
 CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
@@ -31,6 +34,9 @@
 CONFIG_POWER4_ONLY=y
 CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -61,12 +67,13 @@
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -123,18 +130,27 @@
 # CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_PASEMI is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_U3_DART=y
-# CONFIG_PPC_RTAS is not set
+CONFIG_PPC_RTAS=y
+# CONFIG_RTAS_ERROR_LOGGING is not set
+CONFIG_RTAS_PROC=y
+# CONFIG_RTAS_FLASH is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
 CONFIG_PPC_970_NAP=y
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_MPIC=y
@@ -144,6 +160,7 @@
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -190,7 +207,6 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -246,6 +262,7 @@
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -346,6 +363,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -371,7 +394,6 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -395,6 +417,7 @@
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -439,6 +462,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -523,6 +547,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -618,6 +643,8 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
+CONFIG_HVC_RTAS=y
 
 #
 # IPMI
@@ -634,10 +661,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -647,7 +670,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -711,6 +733,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -719,15 +742,9 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-# CONFIG_TIFM_CORE is not set
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -740,6 +757,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Console display driver support
@@ -754,6 +772,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -768,6 +791,7 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -803,7 +827,6 @@
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -819,7 +842,6 @@
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB Imaging devices
@@ -833,6 +855,7 @@
 # CONFIG_USB_KAWETH is not set
 CONFIG_USB_PEGASUS=y
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -881,6 +904,7 @@
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
 # CONFIG_USB_SERIAL_MOS7840 is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
@@ -892,6 +916,7 @@
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
 
 #
@@ -913,6 +938,7 @@
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -970,6 +996,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -978,12 +1008,14 @@
 CONFIG_FS_XIP=y
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1133,14 +1165,21 @@
 CONFIG_NLS_UTF8=y
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1155,6 +1194,8 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1169,8 +1210,8 @@
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_FORCED_INLINING is not set
@@ -1180,6 +1221,7 @@
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
 # CONFIG_IRQSTACKS is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1195,9 +1237,10 @@
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1206,8 +1249,10 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index d1811e7..fdf09ea 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:26:55 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:20:53 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
@@ -58,16 +62,20 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
@@ -75,12 +83,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -93,6 +101,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -114,19 +123,19 @@
 # Platform support
 #
 # CONFIG_PPC_MULTIPLATFORM is not set
-# CONFIG_PPC_ISERIES is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_APUS is not set
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
-# CONFIG_PPC_TODC is not set
 # CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
 # CONFIG_CPCI690 is not set
@@ -141,6 +150,7 @@
 # CONFIG_PRPMC750 is not set
 # CONFIG_PRPMC800 is not set
 # CONFIG_SANDPOINT is not set
+# CONFIG_LINKSTATION is not set
 CONFIG_MPC7448HPC2=y
 # CONFIG_RADSTONE_PPC7D is not set
 # CONFIG_PAL4 is not set
@@ -152,7 +162,6 @@
 # CONFIG_TQM8260 is not set
 # CONFIG_ADS8272 is not set
 # CONFIG_PQ2FADS is not set
-# CONFIG_LITE5200 is not set
 # CONFIG_EV64360 is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_WANT_EARLY_SERIAL is not set
@@ -164,6 +173,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -173,6 +183,7 @@
 CONFIG_BINFMT_MISC=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -237,6 +248,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -258,10 +270,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -291,7 +306,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -362,6 +376,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -371,6 +391,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -389,14 +411,16 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -409,18 +433,44 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
 CONFIG_ATA=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_ATA_PIIX is not set
 CONFIG_SATA_MV=y
 # CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
@@ -430,23 +480,41 @@
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -474,6 +542,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -505,6 +574,7 @@
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -563,6 +633,8 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+CONFIG_TSI108_ETH=y
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -571,6 +643,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -610,6 +683,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -654,6 +728,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -677,10 +752,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -689,7 +760,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -705,6 +775,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -713,17 +784,14 @@
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -735,6 +803,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -743,6 +812,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -805,6 +879,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -814,6 +892,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -821,6 +900,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -850,8 +930,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -921,13 +1003,20 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -938,12 +1027,14 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -957,7 +1048,3 @@
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig
index 0561b73..45757b6 100644
--- a/arch/powerpc/configs/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Mon Sep 25 19:41:14 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:23:43 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -22,13 +23,13 @@
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_85xx is not set
@@ -40,6 +41,8 @@
 CONFIG_6xx=y
 CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
@@ -59,16 +62,20 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
 CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -98,6 +105,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -120,8 +128,10 @@
 #
 # Platform support
 #
+# CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC834x_SYS is not set
 CONFIG_MPC834x_ITX=y
+# CONFIG_MPC8360E_PB is not set
 CONFIG_MPC834x=y
 # CONFIG_MPIC is not set
 
@@ -131,6 +141,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -138,8 +149,10 @@
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -206,6 +219,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -227,10 +241,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -411,9 +428,16 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 # CONFIG_BLK_DEV_IDE is not set
 # CONFIG_BLK_DEV_HD_ONLY is not set
 # CONFIG_BLK_DEV_HD is not set
@@ -423,6 +447,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -441,14 +467,16 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -461,18 +489,44 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_IPR is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_NSP32 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
 CONFIG_ATA=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SVW is not set
-# CONFIG_SCSI_ATA_PIIX is not set
+# CONFIG_ATA_PIIX is not set
 # CONFIG_SATA_MV is not set
 # CONFIG_SATA_NV is not set
-# CONFIG_SCSI_PDC_ADMA is not set
-# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_PDC_ADMA is not set
 # CONFIG_SATA_QSTOR is not set
 # CONFIG_SATA_PROMISE is not set
 # CONFIG_SATA_SX4 is not set
@@ -482,23 +536,41 @@
 # CONFIG_SATA_ULI is not set
 # CONFIG_SATA_VIA is not set
 # CONFIG_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -535,6 +607,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -566,6 +639,7 @@
 CONFIG_CICADA_PHY=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -622,6 +696,7 @@
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
 CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -630,6 +705,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -669,6 +745,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -713,6 +790,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -753,10 +831,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -765,7 +839,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -842,6 +915,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -876,29 +950,27 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -911,6 +983,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -919,6 +992,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -933,6 +1011,7 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -972,6 +1051,7 @@
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1010,6 +1090,7 @@
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1027,6 +1108,7 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1034,12 +1116,13 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1067,6 +1150,7 @@
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
 
 #
 # MMC/SD Card support
@@ -1102,6 +1186,7 @@
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -1145,6 +1230,10 @@
 CONFIG_INTEL_IOATDMA=y
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1154,6 +1243,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1161,6 +1251,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1190,8 +1281,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1206,7 +1299,6 @@
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1249,6 +1341,10 @@
 # CONFIG_ATARI_PARTITION is not set
 # CONFIG_MAC_PARTITION is not set
 CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
@@ -1262,13 +1358,20 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1279,8 +1382,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1294,9 +1400,10 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
@@ -1316,8 +1423,10 @@
 #
 CONFIG_CRYPTO=y
 CONFIG_CRYPTO_ALGAPI=y
-# CONFIG_CRYPTO_MANAGER is not set
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -1326,8 +1435,10 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/powerpc/configs/mpc834x_mds_defconfig b/arch/powerpc/configs/mpc834x_mds_defconfig
index 9eefab9..c24db58 100644
--- a/arch/powerpc/configs/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:28:54 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:24:10 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_85xx is not set
@@ -39,6 +41,8 @@
 CONFIG_6xx=y
 CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
@@ -58,28 +62,32 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -97,6 +105,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -119,8 +128,10 @@
 #
 # Platform support
 #
+# CONFIG_MPC832x_MDS is not set
 CONFIG_MPC834x_SYS=y
 # CONFIG_MPC834x_ITX is not set
+# CONFIG_MPC8360E_PB is not set
 CONFIG_MPC834x=y
 # CONFIG_MPIC is not set
 
@@ -130,6 +141,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -137,8 +149,10 @@
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -204,6 +218,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -225,10 +240,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -258,7 +276,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -329,6 +346,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -338,6 +361,12 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -362,6 +391,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -393,6 +423,7 @@
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -449,6 +480,7 @@
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -457,6 +489,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -495,6 +528,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -539,6 +573,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -575,10 +610,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -587,7 +618,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -653,6 +683,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -686,29 +717,27 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -720,6 +749,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -728,6 +758,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -790,6 +825,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -799,6 +838,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -806,6 +846,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -835,8 +876,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -905,13 +948,20 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -922,11 +972,14 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_SERIAL_TEXT_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -941,7 +994,11 @@
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -950,6 +1007,10 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/powerpc/configs/mpc8360emds_defconfig b/arch/powerpc/configs/mpc8360emds_defconfig
index c070341..58e6795 100644
--- a/arch/powerpc/configs/mpc8360emds_defconfig
+++ b/arch/powerpc/configs/mpc8360emds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Thu Sep 21 18:14:27 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:24:40 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -22,13 +23,13 @@
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_85xx is not set
@@ -40,6 +41,8 @@
 CONFIG_6xx=y
 CONFIG_83xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
@@ -59,16 +62,20 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EMBEDDED=y
 CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -98,6 +105,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -121,6 +129,7 @@
 #
 # Platform support
 #
+# CONFIG_MPC832x_MDS is not set
 # CONFIG_MPC834x_SYS is not set
 # CONFIG_MPC834x_ITX is not set
 CONFIG_MPC8360E_PB=y
@@ -133,6 +142,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -140,8 +150,10 @@
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -207,6 +219,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -228,10 +241,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -331,6 +347,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -340,6 +362,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -358,14 +382,16 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -378,11 +404,12 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -392,15 +419,22 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -428,6 +462,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -488,6 +523,7 @@
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMOND is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -496,6 +532,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -535,6 +572,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -579,6 +617,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -615,10 +654,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -627,7 +662,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -693,6 +727,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -726,29 +761,27 @@
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -760,6 +793,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -768,6 +802,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -830,6 +869,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -839,6 +882,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -846,6 +890,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -875,8 +920,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -945,20 +992,27 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # QE Options
 #
-# CONFIG_UCC_SLOW is not set
+CONFIG_UCC_SLOW=y
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -969,11 +1023,14 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_DEBUG_FS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_SERIAL_TEXT_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -988,7 +1045,11 @@
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
 # CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
@@ -997,6 +1058,10 @@
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set
diff --git a/arch/powerpc/configs/mpc8540_ads_defconfig b/arch/powerpc/configs/mpc8540_ads_defconfig
index 67e7d0b..17120c4 100644
--- a/arch/powerpc/configs/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:29:23 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:25:24 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_85xx=y
 CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
@@ -58,16 +62,20 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,12 +84,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -94,6 +102,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -116,6 +125,7 @@
 # Platform support
 #
 CONFIG_MPC8540_ADS=y
+# CONFIG_MPC8560_ADS is not set
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC8540=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
@@ -127,6 +137,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -137,6 +148,7 @@
 CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -199,6 +211,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -220,10 +233,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -253,7 +269,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -320,6 +335,11 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -329,6 +349,12 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -351,6 +377,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -377,6 +404,7 @@
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -429,6 +457,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -472,6 +501,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -493,17 +523,12 @@
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -519,6 +544,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -527,17 +553,14 @@
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -549,6 +572,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -557,6 +581,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -617,6 +646,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -626,6 +659,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -633,6 +667,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -662,8 +697,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -729,13 +766,20 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -746,8 +790,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -761,10 +808,10 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
@@ -782,7 +829,3 @@
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/powerpc/configs/mpc8560_ads_defconfig b/arch/powerpc/configs/mpc8560_ads_defconfig
index ddc2a7b..ecaa267 100644
--- a/arch/powerpc/configs/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc4
-# Fri Aug 11 16:45:05 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:25:53 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_85xx=y
 CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
@@ -58,16 +62,20 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,12 +84,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -94,6 +102,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -110,7 +119,6 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
 CONFIG_CPM2=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -122,6 +130,7 @@
 # CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC8560=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -129,6 +138,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -140,6 +150,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_PC_KEYBOARD is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -152,13 +163,13 @@
 # CONFIG_PROC_DEVICETREE is not set
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -205,6 +216,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -226,10 +238,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -259,7 +274,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -331,6 +345,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -340,6 +360,12 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -364,6 +390,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -395,6 +422,7 @@
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -437,6 +465,7 @@
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
 CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -445,6 +474,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -483,6 +513,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -522,6 +553,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_SERIAL_CPM=y
@@ -536,7 +568,6 @@
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -554,10 +585,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -566,7 +593,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -582,6 +608,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -590,17 +617,14 @@
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -612,6 +636,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -620,6 +645,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -682,6 +712,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -691,6 +725,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -698,6 +733,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -727,8 +763,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -794,13 +832,20 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -811,8 +856,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -826,10 +874,10 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
@@ -848,7 +896,3 @@
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/powerpc/configs/mpc85xx_cds_defconfig b/arch/powerpc/configs/mpc85xx_cds_defconfig
index 72edf9f..1f61bce 100644
--- a/arch/powerpc/configs/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:29:49 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:26:46 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_85xx=y
 CONFIG_E500=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
@@ -58,16 +62,20 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -76,12 +84,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -94,6 +102,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -116,6 +125,7 @@
 # Platform support
 #
 # CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC8540=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
@@ -127,6 +137,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -137,6 +148,7 @@
 CONFIG_MATH_EMULATION=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -202,6 +214,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -223,10 +236,13 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -256,7 +272,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -328,9 +343,16 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -353,7 +375,6 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 # CONFIG_IDEDMA_PCI_AUTO is not set
@@ -367,6 +388,7 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_IT821X is not set
@@ -375,6 +397,7 @@
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 CONFIG_BLK_DEV_VIA82CXXX=y
@@ -389,6 +412,12 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -413,6 +442,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -444,6 +474,7 @@
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -483,6 +514,7 @@
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
 CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -491,6 +523,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -529,6 +562,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -573,6 +607,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -596,10 +631,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -608,7 +639,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -624,6 +654,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -632,17 +663,14 @@
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -654,6 +682,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -662,6 +691,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -724,6 +758,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -733,6 +771,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -740,6 +779,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -769,8 +809,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -836,13 +878,20 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -853,8 +902,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -868,10 +920,10 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
@@ -889,7 +941,3 @@
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig
index 92a527f..53fcd69 100644
--- a/arch/powerpc/configs/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:30:15 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:27:14 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
 #
 # CONFIG_CLASSIC32 is not set
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
@@ -62,15 +66,18 @@
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
@@ -79,15 +86,15 @@
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-# CONFIG_SLAB is not set
+CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
-CONFIG_SLOB=y
+# CONFIG_SLOB is not set
 
 #
 # Loadable module support
@@ -97,6 +104,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_LSF is not set
@@ -129,6 +137,7 @@
 CONFIG_HIGHMEM=y
 # CONFIG_HZ_100 is not set
 # CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
 CONFIG_HZ_1000=y
 CONFIG_HZ=1000
 CONFIG_PREEMPT_NONE=y
@@ -140,6 +149,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -206,6 +216,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -226,21 +237,29 @@
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 CONFIG_IPV6=y
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
 # CONFIG_INET6_AH is not set
 # CONFIG_INET6_ESP is not set
 # CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
 CONFIG_INET6_XFRM_MODE_TRANSPORT=y
 CONFIG_INET6_XFRM_MODE_TUNNEL=y
+CONFIG_INET6_XFRM_MODE_BEET=y
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=y
 # CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -267,7 +286,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -339,6 +357,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 # CONFIG_IDE is not set
@@ -348,6 +372,12 @@
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -372,6 +402,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -403,6 +434,7 @@
 # CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
 # CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
 # CONFIG_FIXED_PHY is not set
 
 #
@@ -440,6 +472,7 @@
 # CONFIG_BNX2 is not set
 CONFIG_GIANFAR=y
 # CONFIG_GFAR_NAPI is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -448,6 +481,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -486,6 +520,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -542,6 +577,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -563,10 +599,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -575,7 +607,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -640,6 +671,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -648,14 +680,9 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -667,6 +694,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Console display driver support
@@ -682,6 +710,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -744,6 +777,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -753,6 +790,7 @@
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -760,6 +798,7 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -788,8 +827,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -904,13 +945,20 @@
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -921,12 +969,16 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -936,10 +988,10 @@
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
-# CONFIG_UNWIND_INFO is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUGGER is not set
@@ -957,7 +1009,3 @@
 # Cryptographic options
 #
 # CONFIG_CRYPTO is not set
-
-#
-# Hardware crypto devices
-#
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index 765c8bb..f611df4 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:30:23 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:28:56 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -10,6 +10,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -21,13 +22,14 @@
 CONFIG_PPC_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
 # Processor support
 #
 CONFIG_CLASSIC32=y
-# CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
@@ -38,6 +40,8 @@
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
@@ -58,17 +62,21 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -77,12 +85,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -100,6 +108,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 CONFIG_LBD=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 CONFIG_LSF=y
@@ -121,18 +130,22 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
 # CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_MPC52xx is not set
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
 CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_UDBG_RTAS_CONSOLE is not set
+CONFIG_PPC_NATIVE=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_PPC_MPC106=y
 # CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -157,6 +170,7 @@
 # CONFIG_HIGHMEM is not set
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -167,6 +181,7 @@
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_KEXEC is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -181,6 +196,8 @@
 CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 CONFIG_PM_DEBUG=y
+# CONFIG_DISABLE_CONSOLE_SUSPEND is not set
+CONFIG_PM_SYSFS_DEPRECATED=y
 CONFIG_SOFTWARE_SUSPEND=y
 CONFIG_PM_STD_PARTITION=""
 CONFIG_SECCOMP=y
@@ -254,6 +271,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -272,10 +290,13 @@
 # CONFIG_INET_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -292,14 +313,33 @@
 # Core Netfilter Configuration
 #
 # CONFIG_NETFILTER_NETLINK is not set
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+# CONFIG_NF_CONNTRACK_MARK is not set
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_MARK=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
@@ -312,61 +352,49 @@
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
+# CONFIG_NETFILTER_XT_MATCH_STATE is not set
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_NETBIOS_NS=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_PPTP=m
-CONFIG_IP_NF_H323=m
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 # CONFIG_IP_NF_QUEUE is not set
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 CONFIG_IP_NF_MATCH_TOS=m
 CONFIG_IP_NF_MATCH_RECENT=m
 CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
 CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_MATCH_OWNER=m
 CONFIG_IP_NF_MATCH_ADDRTYPE=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
 CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_NAT_PPTP=m
-CONFIG_IP_NF_NAT_H323=m
+# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
+# CONFIG_NF_NAT_SIP is not set
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
@@ -384,8 +412,11 @@
 # DCCP CCIDs Configuration (EXPERIMENTAL)
 #
 CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
 CONFIG_IP_DCCP_CCID3=m
 CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
 
 #
 # DCCP Kernel Hacking
@@ -410,7 +441,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -567,6 +597,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -594,7 +630,6 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -609,6 +644,7 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_IT821X is not set
@@ -617,6 +653,7 @@
 CONFIG_BLK_DEV_PDC202XX_NEW=y
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -634,6 +671,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -653,14 +692,16 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -678,11 +719,12 @@
 CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
 CONFIG_SCSI_AIC7XXX_OLD=m
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_ATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -692,14 +734,15 @@
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
 CONFIG_SCSI_SYM53C8XX_MMIO=y
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
@@ -709,6 +752,7 @@
 CONFIG_SCSI_MESH_SYNC_RATE=5
 CONFIG_SCSI_MESH_RESET_DELAY_MS=4000
 CONFIG_SCSI_MAC53C94=y
+# CONFIG_SCSI_SRP is not set
 
 #
 # PCMCIA SCSI adapter support
@@ -720,6 +764,11 @@
 # CONFIG_PCMCIA_SYM53C500 is not set
 
 #
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
 # Multi-device support (RAID and LVM)
 #
 CONFIG_MD=y
@@ -732,6 +781,7 @@
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -798,6 +848,7 @@
 CONFIG_THERM_ADT746X=m
 # CONFIG_WINDFARM is not set
 # CONFIG_ANSLCD is not set
+CONFIG_PMAC_RACKMETER=m
 
 #
 # Network device support
@@ -838,6 +889,7 @@
 # CONFIG_HP100 is not set
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -874,6 +926,7 @@
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
 # CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -882,6 +935,7 @@
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -957,6 +1011,7 @@
 # CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
 # CONFIG_SLIP is not set
+CONFIG_SLHC=y
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
@@ -977,6 +1032,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -999,6 +1055,7 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -1039,6 +1096,7 @@
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_UARTLITE is not set
 CONFIG_SERIAL_CORE=m
 CONFIG_SERIAL_PMACZILOG=m
 # CONFIG_SERIAL_JSM is not set
@@ -1062,13 +1120,7 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 CONFIG_AGP=m
-# CONFIG_AGP_SIS is not set
-# CONFIG_AGP_VIA is not set
 CONFIG_AGP_UNINORTH=m
 CONFIG_DRM=m
 # CONFIG_DRM_TDFX is not set
@@ -1091,7 +1143,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -1167,14 +1218,9 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -1187,6 +1233,7 @@
 #
 # CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
+CONFIG_FB_DDC=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1235,6 +1282,7 @@
 # CONFIG_FB_3DFX_ACCEL is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -1393,6 +1441,11 @@
 # CONFIG_SOUND_PRIME is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1408,6 +1461,7 @@
 # CONFIG_USB_BANDWIDTH is not set
 CONFIG_USB_DYNAMIC_MINORS=y
 # CONFIG_USB_SUSPEND is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1448,13 +1502,13 @@
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 CONFIG_USB_HIDINPUT_POWERBOOK=y
 # CONFIG_HID_FF is not set
 # CONFIG_USB_HIDDEV is not set
@@ -1484,12 +1538,14 @@
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET_MII=m
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_AX8817X=m
 CONFIG_USB_NET_CDCETHER=m
 # CONFIG_USB_NET_GL620A is not set
 CONFIG_USB_NET_NET1080=m
 # CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
 # CONFIG_USB_NET_RNDIS_HOST is not set
 # CONFIG_USB_NET_CDC_SUBSET is not set
 CONFIG_USB_NET_ZAURUS=m
@@ -1504,6 +1560,7 @@
 #
 CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
@@ -1538,6 +1595,8 @@
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -1548,6 +1607,7 @@
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 CONFIG_USB_EZUSB=y
 
 #
@@ -1555,6 +1615,7 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1562,12 +1623,13 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1630,6 +1692,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1639,6 +1705,7 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1646,6 +1713,7 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1682,8 +1750,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1802,8 +1872,14 @@
 CONFIG_NLS_UTF8=m
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC16=y
 CONFIG_CRC32=y
@@ -1815,6 +1891,7 @@
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1826,8 +1903,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1841,14 +1921,16 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
 # CONFIG_BDI_SWITCH is not set
 CONFIG_BOOTX_TEXT=y
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1863,7 +1945,12 @@
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1872,9 +1959,14 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 340376a..debac66 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc3
-# Tue Jan  2 15:32:44 2007
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:28:58 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -246,7 +246,6 @@
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 # CONFIG_PCIEPORTBUS is not set
-# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 70ed613..3256087 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Tue Nov 21 19:38:53 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:29:11 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -10,6 +10,8 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -23,6 +25,7 @@
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
@@ -64,6 +67,7 @@
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_CPUSETS is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -126,6 +130,7 @@
 # CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
@@ -164,6 +169,7 @@
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -261,6 +267,7 @@
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -366,6 +373,7 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -385,6 +393,7 @@
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
@@ -427,6 +436,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -549,10 +559,6 @@
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_HANGCHECK_TIMER is not set
 
@@ -598,6 +604,7 @@
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Console display driver support
@@ -612,6 +619,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 # CONFIG_USB_ARCH_HAS_HCD is not set
@@ -672,6 +684,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 # CONFIG_EXT2_FS is not set
@@ -772,6 +788,11 @@
 # CONFIG_NLS is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set
@@ -779,6 +800,7 @@
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -793,6 +815,8 @@
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -806,12 +830,11 @@
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
 CONFIG_DEBUG_LIST=y
 CONFIG_FORCED_INLINING=y
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index d2833c1..1c794fe 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc6
-# Sun Sep 10 10:45:12 2006
+# Linux kernel version: 2.6.20-rc5
+# Mon Jan 22 22:31:27 2007
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -10,6 +10,8 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -22,6 +24,8 @@
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
@@ -31,6 +35,9 @@
 CONFIG_POWER3=y
 CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+# CONFIG_PPC_OF_PLATFORM_PCI is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
@@ -52,19 +59,22 @@
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 CONFIG_AUDIT=y
 CONFIG_AUDITSYSCALL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -73,12 +83,12 @@
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -97,6 +107,7 @@
 #
 # Block layer
 #
+CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
@@ -116,15 +127,19 @@
 # Platform support
 #
 CONFIG_PPC_MULTIPLATFORM=y
-# CONFIG_PPC_ISERIES is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_APUS is not set
 CONFIG_PPC_PSERIES=y
+# CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
+# CONFIG_PPC_PASEMI is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_PS3 is not set
+CONFIG_PPC_NATIVE=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
@@ -137,6 +152,8 @@
 CONFIG_IBMEBUS=y
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_MPIC=y
@@ -146,6 +163,7 @@
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -170,6 +188,7 @@
 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -183,7 +202,6 @@
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 CONFIG_RESOURCES_64BIT=y
-CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_NODES_SPAN_OTHER_NODES=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
@@ -235,6 +253,7 @@
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 CONFIG_XFRM_USER=m
+# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=m
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -253,10 +272,13 @@
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -275,25 +297,30 @@
 CONFIG_NETFILTER_NETLINK=y
 CONFIG_NETFILTER_NETLINK_QUEUE=m
 CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NF_CONNTRACK_SUPPORT=y
+# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
+CONFIG_NF_CONNTRACK=m
+# CONFIG_NF_CT_ACCT is not set
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CONNTRACK_FTP=m
+# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_IRC=m
+# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
+# CONFIG_NF_CONNTRACK_PPTP is not set
+# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
 # CONFIG_NETFILTER_XTABLES is not set
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=m
-CONFIG_IP_NF_CT_ACCT=y
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK_EVENTS=y
-CONFIG_IP_NF_CONNTRACK_NETLINK=m
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -320,7 +347,6 @@
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -402,6 +428,12 @@
 # CONFIG_ATA_OVER_ETH is not set
 
 #
+# Misc devices
+#
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+
+#
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
@@ -428,7 +460,6 @@
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_SL82C105=y
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -443,6 +474,7 @@
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_IT821X is not set
@@ -451,6 +483,7 @@
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 # CONFIG_BLK_DEV_SIIMAGE is not set
+CONFIG_BLK_DEV_SL82C105=y
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -465,6 +498,8 @@
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+CONFIG_SCSI_NETLINK=y
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -484,14 +519,16 @@
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_FC_ATTRS=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SAS_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -504,10 +541,11 @@
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-CONFIG_ATA=y
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_BUSLOGIC is not set
 # CONFIG_SCSI_DMX3191D is not set
@@ -520,6 +558,7 @@
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
+# CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
@@ -530,10 +569,66 @@
 CONFIG_SCSI_IPR_DUMP=y
 # CONFIG_SCSI_QLOGIC_1280 is not set
 CONFIG_SCSI_QLA_FC=m
+# CONFIG_SCSI_QLA_ISCSI is not set
 CONFIG_SCSI_LPFC=m
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -548,6 +643,7 @@
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
 CONFIG_DM_CRYPT=m
 CONFIG_DM_SNAPSHOT=m
 CONFIG_DM_MIRROR=m
@@ -576,6 +672,7 @@
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -617,6 +714,7 @@
 CONFIG_IBMVETH=y
 CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
+# CONFIG_PCNET32_NAPI is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
@@ -655,17 +753,19 @@
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
 #
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_EHEA=m
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 CONFIG_S2IO=m
 # CONFIG_S2IO_NAPI is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -697,6 +797,7 @@
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
 # CONFIG_SLIP is not set
+CONFIG_SLHC=m
 # CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 CONFIG_NETCONSOLE=y
@@ -719,6 +820,7 @@
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -741,6 +843,7 @@
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -815,10 +918,6 @@
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 CONFIG_RAW_DRIVER=y
@@ -829,7 +928,6 @@
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -894,6 +992,7 @@
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -902,14 +1001,9 @@
 # CONFIG_HWMON_VID is not set
 
 #
-# Misc devices
-#
-
-#
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -922,6 +1016,7 @@
 #
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
+CONFIG_FB_DDC=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -957,6 +1052,7 @@
 # CONFIG_FB_3DFX is not set
 # CONFIG_FB_VOODOO1 is not set
 # CONFIG_FB_TRIDENT is not set
+CONFIG_FB_IBM_GXT4500=y
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -989,6 +1085,11 @@
 # CONFIG_SOUND is not set
 
 #
+# HID Devices
+#
+CONFIG_HID=y
+
+#
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1003,6 +1104,7 @@
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1043,13 +1145,13 @@
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
 CONFIG_USB_HID=y
-CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_HIDINPUT_POWERBOOK is not set
 # CONFIG_HID_FF is not set
 CONFIG_USB_HIDDEV=y
@@ -1079,6 +1181,7 @@
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1097,6 +1200,7 @@
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1104,12 +1208,13 @@
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -1148,6 +1253,9 @@
 CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
+CONFIG_INFINIBAND_EHCA=m
+CONFIG_INFINIBAND_EHCA_SCALING=y
+# CONFIG_INFINIBAND_AMSO1100 is not set
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
@@ -1177,6 +1285,10 @@
 #
 
 #
+# Virtualization
+#
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -1189,6 +1301,7 @@
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1209,6 +1322,7 @@
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_MINIX_FS is not set
@@ -1246,8 +1360,10 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
@@ -1357,17 +1473,22 @@
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1380,8 +1501,11 @@
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1395,16 +1519,20 @@
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_LKDTM is not set
 CONFIG_DEBUG_STACKOVERFLOW=y
 # CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_HCALL_STATS=y
 CONFIG_DEBUGGER=y
 CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
+CONFIG_XMON_DISASSEMBLY=y
 CONFIG_IRQSTACKS=y
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
@@ -1419,7 +1547,12 @@
 # Cryptographic options
 #
 CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
@@ -1428,9 +1561,14 @@
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_TGR192=m
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=y
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_CAST5=m
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 2847cd5..c54f363 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -775,11 +775,6 @@
 	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
 	of_node_put(parent);
 
-	/* sanity check */
-	if (strcmp(np->type, "pci") != 0)
-		printk(KERN_WARNING "pci: wrong type \"%s\" for bridge %s\n",
-		       np->type, np->full_name);
-
 	return np;
 }
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index f58c978..4d47119 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -103,7 +103,7 @@
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
 
-	if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
 
diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
index 7bfd47a..53b92a9 100644
--- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c
+++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c
@@ -108,7 +108,7 @@
 #ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
 
-	if ((np = of_find_node_by_name(np, "par_io")) != NULL) {
+	if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
 		par_io_init(np);
 		of_node_put(np);
 
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 3c95392..e6653a8 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -459,7 +459,8 @@
 		tbl = kmalloc_node(sizeof(struct iommu_table), GFP_KERNEL,
 				   phb->node);
 		iommu_table_setparms(phb, dn, tbl);
-		dev->dev.archdata.dma_data = iommu_init_table(tbl, phb->node);
+		PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
+		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
 		return;
 	}
 
diff --git a/arch/powerpc/sysdev/mmio_nvram.c b/arch/powerpc/sysdev/mmio_nvram.c
index ff23f5a..e073e24 100644
--- a/arch/powerpc/sysdev/mmio_nvram.c
+++ b/arch/powerpc/sysdev/mmio_nvram.c
@@ -80,33 +80,39 @@
 int __init mmio_nvram_init(void)
 {
 	struct device_node *nvram_node;
-	const unsigned long *buffer;
-	int proplen;
 	unsigned long nvram_addr;
+	struct resource r;
 	int ret;
 
-	ret = -ENODEV;
 	nvram_node = of_find_node_by_type(NULL, "nvram");
-	if (!nvram_node)
-		goto out;
+	if (!nvram_node) {
+		printk(KERN_WARNING "nvram: no node found in device-tree\n");
+		return -ENODEV;
+	}
 
-	ret = -EIO;
-	buffer = get_property(nvram_node, "reg", &proplen);
-	if (proplen != 2*sizeof(unsigned long))
+	ret = of_address_to_resource(nvram_node, 0, &r);
+	if (ret) {
+		printk(KERN_WARNING "nvram: failed to get address (err %d)\n",
+		       ret);
 		goto out;
-
-	ret = -ENODEV;
-	nvram_addr = buffer[0];
-	mmio_nvram_len = buffer[1];
-	if ( (!mmio_nvram_len) || (!nvram_addr) )
+	}
+	nvram_addr = r.start;
+	mmio_nvram_len = r.end - r.start + 1;
+	if ( (!mmio_nvram_len) || (!nvram_addr) ) {
+		printk(KERN_WARNING "nvram: address or lenght is 0\n");
+		ret = -EIO;
 		goto out;
+	}
 
 	mmio_nvram_start = ioremap(nvram_addr, mmio_nvram_len);
-	if (!mmio_nvram_start)
+	if (!mmio_nvram_start) {
+		printk(KERN_WARNING "nvram: failed to ioremap\n");
+		ret = -ENOMEM;
 		goto out;
+	}
 
-	printk(KERN_INFO "mmio NVRAM, %luk mapped to %p\n",
-	       mmio_nvram_len >> 10, mmio_nvram_start);
+	printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n",
+	       mmio_nvram_len >> 10, nvram_addr, mmio_nvram_start);
 
 	ppc_md.nvram_read	= mmio_nvram_read;
 	ppc_md.nvram_write	= mmio_nvram_write;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 08ad44b..56cf59b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1979,6 +1979,10 @@
 
 		ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
 
+		/* collect port action mask recorded in dev actions */
+		ehc->i.action |= ehc->i.dev_action[i] & ~ATA_EH_PERDEV_MASK;
+		ehc->i.dev_action[i] &= ATA_EH_PERDEV_MASK;
+
 		/* process hotplug request */
 		if (dev->flags & ATA_DFLAG_DETACH)
 			ata_eh_detach_dev(dev);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 1b8e0eb..aae0b52 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -523,8 +523,7 @@
 	},
 	{  /* chip_7042 */
 		.sht		= &mv_sht,
-		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
-				   MV_FLAG_DUAL_HC),
+		.flags		= (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= 0x7f,	/* udma0-6 */
 		.port_ops	= &mv_iie_ops,
@@ -545,6 +544,8 @@
 
 	{ PCI_VDEVICE(ADAPTEC2, 0x0241), chip_604x },
 
+	{ PCI_VDEVICE(TTI, 0x2310), chip_7042 },
+
 	{ }			/* terminate list */
 };
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 1c7f19a..88f0565 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -77,6 +77,7 @@
 static void vt6420_error_handler(struct ata_port *ap);
 
 static const struct pci_device_id svia_pci_tbl[] = {
+	{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
 	{ PCI_VDEVICE(VIA, 0x0591), vt6420 },
 	{ PCI_VDEVICE(VIA, 0x3149), vt6420 },
 	{ PCI_VDEVICE(VIA, 0x3249), vt6421 },
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 4f1813e..f5c160c 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -293,8 +293,8 @@
 {
 	unsigned long pfn;
 
-	/* Turn a pfn offset into an absolute pfn */
-	pfn = PFN_DOWN(virt_to_phys((void *)PAGE_OFFSET)) + vma->vm_pgoff;
+	/* Turn a kernel-virtual address into a physical page frame */
+	pfn = __pa((u64)vma->vm_pgoff << PAGE_SHIFT) >> PAGE_SHIFT;
 
 	/*
 	 * RED-PEN: on some architectures there is more mapped memory
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 1e1a777..b8cf50f 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -880,6 +880,10 @@
 	unsigned size = field->report_size;
 	unsigned n;
 
+	/* make sure the unused bits in the last byte are zeros */
+	if (count > 0 && size > 0)
+		data[(count*size-1)/8] = 0;
+
 	for (n = 0; n < count; n++) {
 		if (field->logical_minimum < 0)	/* signed values */
 			implement(data, offset + n * size, size, s32ton(field->value[n], size));
@@ -947,7 +951,7 @@
 	}
 
 #ifdef DEBUG_DATA
-	printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", len, report_enum->numbered ? "" : "un");
+	printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
 #endif
 
 	n = 0;                          /* Normally report number is 0 */
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index 28689e3..9cf591a 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -30,7 +30,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/kernel.h>
-#include <linux/usb/input.h>
 
 #undef DEBUG
 
@@ -364,9 +363,22 @@
 			break;
 
 		case HID_UP_LED:
-			if (((usage->hid - 1) & 0xffff) >= LED_MAX)
-				goto ignore;
-			map_led((usage->hid - 1) & 0xffff);
+
+			switch (usage->hid & 0xffff) {                        /* HID-Value:                   */
+				case 0x01:  map_led (LED_NUML);     break;    /*   "Num Lock"                 */
+				case 0x02:  map_led (LED_CAPSL);    break;    /*   "Caps Lock"                */
+				case 0x03:  map_led (LED_SCROLLL);  break;    /*   "Scroll Lock"              */
+				case 0x04:  map_led (LED_COMPOSE);  break;    /*   "Compose"                  */
+				case 0x05:  map_led (LED_KANA);     break;    /*   "Kana"                     */
+				case 0x27:  map_led (LED_SLEEP);    break;    /*   "Stand-By"                 */
+				case 0x4c:  map_led (LED_SUSPEND);  break;    /*   "System Suspend"           */
+				case 0x09:  map_led (LED_MUTE);     break;    /*   "Mute"                     */
+				case 0x4b:  map_led (LED_MISC);     break;    /*   "Generic Indicator"        */
+				case 0x19:  map_led (LED_MAIL);     break;    /*   "Message Waiting"          */
+				case 0x4d:  map_led (LED_CHARGING); break;    /*   "External Power Connected" */
+
+				default: goto ignore;
+			}
 			break;
 
 		case HID_UP_DIGITIZER:
diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c
index 31c4200..b80f6ed 100644
--- a/drivers/hwmon/hwmon-vid.c
+++ b/drivers/hwmon/hwmon-vid.c
@@ -93,7 +93,7 @@
 	case 110:		/* Intel Conroe */
 				/* compute in uV, round to mV */
 		val &= 0xff;
-		if(((val & 0x7e) == 0xfe) || (!(val & 0x7e)))
+		if (val < 0x02 || val > 0xb2)
 			return 0;
 		return((1600000 - (val - 2) * 6250 + 500) / 1000);
 	case 24:                /* Opteron processor */
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index c12ac5a..253ffaf 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -117,6 +117,7 @@
 /* Low Bits of Vcore A/B Vtt Read/High/Low */
 static const u16 W83793_REG_IN_LOW_BITS[] = { 0x1b, 0x68, 0x69 };
 static u8 scale_in[] = { 2, 2, 2, 16, 16, 16, 8, 24, 24, 16 };
+static u8 scale_in_add[] = { 0, 0, 0, 0, 0, 0, 0, 150, 150, 0 };
 
 #define W83793_REG_FAN(index)		(0x23 + 2 * (index))	/* High byte */
 #define W83793_REG_FAN_MIN(index)	(0x90 + 2 * (index))	/* High byte */
@@ -203,6 +204,8 @@
 	u8 temp_fan_map[6];	/* Temp controls which pwm fan, bit field */
 
 	u8 has_pwm;
+	u8 has_temp;
+	u8 has_vid;
 	u8 pwm_enable;		/* Register value, each Temp has 1 bit */
 	u8 pwm_uptime;		/* Register value */
 	u8 pwm_downtime;	/* Register value */
@@ -500,7 +503,7 @@
 	each has 4 mode:(2 bits)
 	0:	Stop monitor
 	1:	Use internal temp sensor(default)
-	2:	Use sensor in AMD CPU and get result by AMDSI
+	2:	Reserved
 	3:	Use sensor in Intel CPU and get result by PECI
 
 	TR1-TR2
@@ -509,8 +512,8 @@
 	1:	To enable temp sensors monitor
 */
 
-/* 0 disable, 5 AMDSI, 6 PECI */
-static u8 TO_TEMP_MODE[] = { 0, 0, 5, 6 };
+/* 0 disable, 6 PECI */
+static u8 TO_TEMP_MODE[] = { 0, 0, 0, 6 };
 
 static ssize_t
 show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
@@ -550,11 +553,10 @@
 	u8 val = simple_strtoul(buf, NULL, 10);
 
 	/* transform the sysfs interface values into table above */
-	if ((val == 5 || val == 6) && (index < 4)) {
+	if ((val == 6) && (index < 4)) {
 		val -= 3;
 	} else if ((val == 3 && index < 4)
-		|| (val == 4 && index >= 4)
-		|| val == 0) {
+		|| (val == 4 && index >= 4)) {
 		/* transform diode or thermistor into internal enable */
 		val = !!val;
 	} else {
@@ -839,7 +841,9 @@
 		val <<= 2;
 		val += (data->in_low_bits[nr] >> (index * 2)) & 0x3;
 	}
-	return sprintf(buf, "%d\n", val * scale_in[index]);
+	/* voltage inputs 5VDD and 5VSB needs 150mV offset */
+	val = val * scale_in[index] + scale_in_add[index];
+	return sprintf(buf, "%d\n", val);
 }
 
 static ssize_t
@@ -859,6 +863,10 @@
 	     scale_in[index] / 2) / scale_in[index];
 	mutex_lock(&data->update_lock);
 	if (index > 2) {
+		/* fix the limit values of 5VDD and 5VSB to ALARM mechanism */
+		if (1 == nr || 2 == nr) {
+			val -= scale_in_add[index] / scale_in[index];
+		}
 		val = SENSORS_LIMIT(val, 0, 255);
 	} else {
 		val = SENSORS_LIMIT(val, 0, 0x3FF);
@@ -979,12 +987,6 @@
 	SENSOR_ATTR_IN(7),
 	SENSOR_ATTR_IN(8),
 	SENSOR_ATTR_IN(9),
-	SENSOR_ATTR_TEMP(1),
-	SENSOR_ATTR_TEMP(2),
-	SENSOR_ATTR_TEMP(3),
-	SENSOR_ATTR_TEMP(4),
-	SENSOR_ATTR_TEMP(5),
-	SENSOR_ATTR_TEMP(6),
 	SENSOR_ATTR_FAN(1),
 	SENSOR_ATTR_FAN(2),
 	SENSOR_ATTR_FAN(3),
@@ -995,6 +997,15 @@
 	SENSOR_ATTR_PWM(3),
 };
 
+static struct sensor_device_attribute_2 w83793_temp[] = {
+	SENSOR_ATTR_TEMP(1),
+	SENSOR_ATTR_TEMP(2),
+	SENSOR_ATTR_TEMP(3),
+	SENSOR_ATTR_TEMP(4),
+	SENSOR_ATTR_TEMP(5),
+	SENSOR_ATTR_TEMP(6),
+};
+
 /* Fan6-Fan12 */
 static struct sensor_device_attribute_2 w83793_left_fan[] = {
 	SENSOR_ATTR_FAN(6),
@@ -1015,9 +1026,12 @@
 	SENSOR_ATTR_PWM(8),
 };
 
-static struct sensor_device_attribute_2 sda_single_files[] = {
+static struct sensor_device_attribute_2 w83793_vid[] = {
 	SENSOR_ATTR_2(cpu0_vid, S_IRUGO, show_vid, NULL, NOT_USED, 0),
 	SENSOR_ATTR_2(cpu1_vid, S_IRUGO, show_vid, NULL, NOT_USED, 1),
+};
+
+static struct sensor_device_attribute_2 sda_single_files[] = {
 	SENSOR_ATTR_2(vrm, S_IWUSR | S_IRUGO, show_vrm, store_vrm,
 		      NOT_USED, NOT_USED),
 	SENSOR_ATTR_2(chassis, S_IWUSR | S_IRUGO, show_alarm_beep,
@@ -1070,11 +1084,17 @@
 		for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
 			device_remove_file(dev, &sda_single_files[i].dev_attr);
 
+		for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
+			device_remove_file(dev, &w83793_vid[i].dev_attr);
+
 		for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
 			device_remove_file(dev, &w83793_left_fan[i].dev_attr);
 
 		for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
 			device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
+
+		for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
+			device_remove_file(dev, &w83793_temp[i].dev_attr);
 	}
 
 	if ((err = i2c_detach_client(client)))
@@ -1187,6 +1207,7 @@
 	struct w83793_data *data;
 	int files_fan = ARRAY_SIZE(w83793_left_fan) / 7;
 	int files_pwm = ARRAY_SIZE(w83793_left_pwm) / 5;
+	int files_temp = ARRAY_SIZE(w83793_temp) / 6;
 	int err = 0;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
@@ -1313,6 +1334,44 @@
 		data->has_pwm |= 0x80;
 	}
 
+	tmp = w83793_read_value(client, W83793_REG_FANIN_SEL);
+	if ((tmp & 0x01) && (val & 0x08)) {	/* fan 9, second location */
+		data->has_fan |= 0x100;
+	}
+	if ((tmp & 0x02) && (val & 0x10)) {	/* fan 10, second location */
+		data->has_fan |= 0x200;
+	}
+	if ((tmp & 0x04) && (val & 0x20)) {	/* fan 11, second location */
+		data->has_fan |= 0x400;
+	}
+	if ((tmp & 0x08) && (val & 0x40)) {	/* fan 12, second location */
+		data->has_fan |= 0x800;
+	}
+
+	/* check the temp1-6 mode, ignore former AMDSI selected inputs */
+	tmp = w83793_read_value(client,W83793_REG_TEMP_MODE[0]);
+	if (tmp & 0x01)
+		data->has_temp |= 0x01;
+	if (tmp & 0x04)
+		data->has_temp |= 0x02;
+	if (tmp & 0x10)
+		data->has_temp |= 0x04;
+	if (tmp & 0x40)
+		data->has_temp |= 0x08;
+
+	tmp = w83793_read_value(client,W83793_REG_TEMP_MODE[1]);
+	if (tmp & 0x01)
+		data->has_temp |= 0x10;
+	if (tmp & 0x02)
+		data->has_temp |= 0x20;
+
+	/* Detect the VID usage and ignore unused input */
+	tmp = w83793_read_value(client, W83793_REG_MFC);
+	if (!(tmp & 0x29))
+		data->has_vid |= 0x1;	/* has VIDA */
+	if (tmp & 0x80)
+		data->has_vid |= 0x2;	/* has VIDB */
+
 	/* Register sysfs hooks */
 	for (i = 0; i < ARRAY_SIZE(w83793_sensor_attr_2); i++) {
 		err = device_create_file(dev,
@@ -1321,6 +1380,14 @@
 			goto exit_remove;
 	}
 
+	for (i = 0; i < ARRAY_SIZE(w83793_vid); i++) {
+		if (!(data->has_vid & (1 << i)))
+			continue;
+		err = device_create_file(dev, &w83793_vid[i].dev_attr);
+		if (err)
+			goto exit_remove;
+	}
+
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
 		err = device_create_file(dev, &sda_single_files[i].dev_attr);
 		if (err)
@@ -1328,6 +1395,19 @@
 
 	}
 
+	for (i = 0; i < 6; i++) {
+		int j;
+		if (!(data->has_temp & (1 << i)))
+			continue;
+		for (j = 0; j < files_temp; j++) {
+			err = device_create_file(dev,
+						&w83793_temp[(i) * files_temp
+								+ j].dev_attr);
+			if (err)
+				goto exit_remove;
+		}
+	}
+
 	for (i = 5; i < 12; i++) {
 		int j;
 		if (!(data->has_fan & (1 << i)))
@@ -1371,12 +1451,18 @@
 	for (i = 0; i < ARRAY_SIZE(sda_single_files); i++)
 		device_remove_file(dev, &sda_single_files[i].dev_attr);
 
+	for (i = 0; i < ARRAY_SIZE(w83793_vid); i++)
+		device_remove_file(dev, &w83793_vid[i].dev_attr);
+
 	for (i = 0; i < ARRAY_SIZE(w83793_left_fan); i++)
 		device_remove_file(dev, &w83793_left_fan[i].dev_attr);
 
 	for (i = 0; i < ARRAY_SIZE(w83793_left_pwm); i++)
 		device_remove_file(dev, &w83793_left_pwm[i].dev_attr);
 
+	for (i = 0; i < ARRAY_SIZE(w83793_temp); i++)
+		device_remove_file(dev, &w83793_temp[i].dev_attr);
+
 	if (data->lm75[0] != NULL) {
 		i2c_detach_client(data->lm75[0]);
 		kfree(data->lm75[0]);
@@ -1428,6 +1514,8 @@
 	}
 
 	for (i = 0; i < ARRAY_SIZE(data->temp_fan_map); i++) {
+		if (!(data->has_temp & (1 << i)))
+			continue;
 		data->temp_fan_map[i] =
 		    w83793_read_value(client, W83793_REG_TEMP_FAN_MAP(i));
 		for (j = 1; j < 5; j++) {
@@ -1510,9 +1598,12 @@
 		    w83793_read_value(client, W83793_REG_FAN(i) + 1);
 	}
 
-	for (i = 0; i < ARRAY_SIZE(data->temp); i++)
+	for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
+		if (!(data->has_temp & (1 << i)))
+			continue;
 		data->temp[i][TEMP_READ] =
 		    w83793_read_value(client, W83793_REG_TEMP[i][TEMP_READ]);
+	}
 
 	data->temp_low_bits =
 	    w83793_read_value(client, W83793_REG_TEMP_LOW_BITS);
@@ -1527,8 +1618,10 @@
 	for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
 		data->alarms[i] =
 		    w83793_read_value(client, W83793_REG_ALARM(i));
-	data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
-	data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
+	if (data->has_vid & 0x01)
+		data->vid[0] = w83793_read_value(client, W83793_REG_VID_INA);
+	if (data->has_vid & 0x02)
+		data->vid[1] = w83793_read_value(client, W83793_REG_VID_INB);
 	w83793_update_nonvolatile(dev);
 	data->last_updated = jiffies;
 	data->valid = 1;
diff --git a/drivers/kvm/vmx.c b/drivers/kvm/vmx.c
index ce219e3..0aa2659 100644
--- a/drivers/kvm/vmx.c
+++ b/drivers/kvm/vmx.c
@@ -1824,7 +1824,7 @@
 #endif
 		"setbe %0 \n\t"
 		"popf \n\t"
-	      : "=g" (fail)
+	      : "=q" (fail)
 	      : "r"(vcpu->launched), "d"((unsigned long)HOST_RSP),
 		"c"(vcpu),
 		[rax]"i"(offsetof(struct kvm_vcpu, regs[VCPU_REGS_RAX])),
diff --git a/drivers/media/video/cx88/cx88-tvaudio.c b/drivers/media/video/cx88/cx88-tvaudio.c
index 3482e01..2bd84d3 100644
--- a/drivers/media/video/cx88/cx88-tvaudio.c
+++ b/drivers/media/video/cx88/cx88-tvaudio.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/errno.h>
+#include <linux/freezer.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
@@ -961,6 +962,7 @@
 		msleep_interruptible(1000);
 		if (kthread_should_stop())
 			break;
+		try_to_freeze();
 
 		/* just monitor the audio status for now ... */
 		memset(&t, 0, sizeof(t));
diff --git a/drivers/media/video/ks0127.c b/drivers/media/video/ks0127.c
index c1a377f..b6cd21e 100644
--- a/drivers/media/video/ks0127.c
+++ b/drivers/media/video/ks0127.c
@@ -712,13 +712,13 @@
 		*iarg = 0;
 		status = ks0127_read(ks, KS_STAT);
 		if (!(status & 0x20))		 /* NOVID not set */
-			*iarg = (*iarg & DECODER_STATUS_GOOD);
+			*iarg = (*iarg | DECODER_STATUS_GOOD);
 		if ((status & 0x01))		      /* CLOCK set */
-			*iarg = (*iarg & DECODER_STATUS_COLOR);
+			*iarg = (*iarg | DECODER_STATUS_COLOR);
 		if ((status & 0x08))		   /* PALDET set */
-			*iarg = (*iarg & DECODER_STATUS_PAL);
+			*iarg = (*iarg | DECODER_STATUS_PAL);
 		else
-			*iarg = (*iarg & DECODER_STATUS_NTSC);
+			*iarg = (*iarg | DECODER_STATUS_NTSC);
 		break;
 
 	//Catch any unknown command
diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c
index 4dead84..ae984bb 100644
--- a/drivers/media/video/saa7134/saa7134-cards.c
+++ b/drivers/media/video/saa7134/saa7134-cards.c
@@ -2570,6 +2570,7 @@
 		.radio_type     = UNSET,
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
+		.gpiomask       = 1 << 21,
 		.inputs = {{
 			.name   = name_tv,
 			.vmux   = 1,
@@ -2578,15 +2579,20 @@
 		},{
 			.name   = name_comp1,
 			.vmux   = 3,
-			.amux   = LINE1,
+			.amux   = LINE2,	/* unconfirmed, taken from Philips driver */
+		},{
+			.name   = name_comp2,
+			.vmux   = 0,		/* untested, Composite over S-Video */
+			.amux   = LINE2,
 		},{
 			.name   = name_svideo,
-			.vmux   = 0,
-			.amux   = LINE1,
+			.vmux   = 8,
+			.amux   = LINE2,
 		}},
 		.radio = {
 			.name   = name_radio,
-			.amux   = LINE1,
+			.amux   = TV,
+			.gpio   = 0x0200000,
 		},
 	},
 	[SAA7134_BOARD_CINERGY250PCI] = {
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 2624e3f..4e7c1fa 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -184,7 +184,7 @@
 	{ TUNER_ABSENT,        "Thompson DTT757"},
 	/* 80-89 */
 	{ TUNER_ABSENT,        "Philips FQ1216LME MK3"},
-	{ TUNER_ABSENT,        "LG TAPC G701D"},
+	{ TUNER_LG_PAL_NEW_TAPC, "LG TAPC G701D"},
 	{ TUNER_LG_NTSC_NEW_TAPC, "LG TAPC H791F"},
 	{ TUNER_LG_PAL_NEW_TAPC, "TCL 2002MB 3"},
 	{ TUNER_LG_PAL_NEW_TAPC, "TCL 2002MI 3"},
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.h b/drivers/media/video/usbvideo/quickcam_messenger.h
index baab9c0..17ace39 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.h
+++ b/drivers/media/video/usbvideo/quickcam_messenger.h
@@ -35,27 +35,13 @@
 };
 
 struct bayL0 {
-#ifdef __BIG_ENDIAN
-	u8 r;
-	u8 g;
-#elif __LITTLE_ENDIAN
 	u8 g;
 	u8 r;
-#else
-#error not byte order defined
-#endif
 };
 
 struct bayL1 {
-#ifdef __BIG_ENDIAN
-	u8 g;
-	u8 b;
-#elif __LITTLE_ENDIAN
 	u8 b;
 	u8 g;
-#else
-#error not byte order defined
-#endif
 };
 
 struct cam_size {
diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c
index 8c7eba2..7243337 100644
--- a/drivers/media/video/usbvision/usbvision-video.c
+++ b/drivers/media/video/usbvision/usbvision-video.c
@@ -1080,7 +1080,6 @@
 	int noblock = file->f_flags & O_NONBLOCK;
 	unsigned long lock_flags;
 
-	int frmx = -1;
 	int ret,i;
 	struct usbvision_frame *frame;
 
@@ -1155,7 +1154,7 @@
 		frame->bytes_read = 0;
 
 		/* Mark it as available to be used again. */
-		usbvision->frame[frmx].grabstate = FrameState_Unused;
+		frame->grabstate = FrameState_Unused;
 /* 	} */
 
 	return count;
diff --git a/drivers/media/video/v4l2-common.c b/drivers/media/video/v4l2-common.c
index 752c82c..b87d571 100644
--- a/drivers/media/video/v4l2-common.c
+++ b/drivers/media/video/v4l2-common.c
@@ -90,8 +90,15 @@
 char *v4l2_norm_to_name(v4l2_std_id id)
 {
 	char *name;
+	u32 myid = id;
 
-	switch (id) {
+	/* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle
+	   64 bit comparations. So, on that architecture, with some gcc variants,
+	   compilation fails. Currently, the max value is 30bit wide.
+	 */
+	BUG_ON(myid != id);
+
+	switch (myid) {
 	case V4L2_STD_PAL:
 		name="PAL";		break;
 	case V4L2_STD_PAL_BG:
diff --git a/drivers/media/video/video-buf.c b/drivers/media/video/video-buf.c
index f429f49..635d102 100644
--- a/drivers/media/video/video-buf.c
+++ b/drivers/media/video/video-buf.c
@@ -1229,7 +1229,7 @@
 		vaddr,vma->vm_start,vma->vm_end);
 	if (vaddr > vma->vm_end)
 		return NOPAGE_SIGBUS;
-	page = alloc_page(GFP_USER);
+	page = alloc_page(GFP_USER | __GFP_DMA32);
 	if (!page)
 		return NOPAGE_OOM;
 	clear_user_page(page_address(page), vaddr, page);
diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c
index bacb311..d4cf556 100644
--- a/drivers/media/video/vivi.c
+++ b/drivers/media/video/vivi.c
@@ -270,10 +270,15 @@
 	char *p,*s,*basep;
 	struct page *pg;
 	u8   chr,r,g,b,color;
+	unsigned long flags;
+	spinlock_t spinlock;
+
+	spin_lock_init(&spinlock);
 
 	/* Get first addr pointed to pixel position */
 	oldpg=get_addr_pos(pos,pages,to_addr);
 	pg=pfn_to_page(sg_dma_address(to_addr[oldpg].sg) >> PAGE_SHIFT);
+	spin_lock_irqsave(&spinlock,flags);
 	basep = kmap_atomic(pg, KM_BOUNCE_READ)+to_addr[oldpg].sg->offset;
 
 	/* We will just duplicate the second pixel at the packet */
@@ -376,6 +381,8 @@
 
 end:
 	kunmap_atomic(basep, KM_BOUNCE_READ);
+	spin_unlock_irqrestore(&spinlock,flags);
+
 }
 static void vivi_fillbuff(struct vivi_dev *dev,struct vivi_buffer *buf)
 {
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 6e068cf..b3f28a0 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -5,7 +5,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -73,6 +73,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*
  *  cmd line parameters
diff --git a/drivers/message/fusion/mptbase.h b/drivers/message/fusion/mptbase.h
index a4afad4..e316708 100644
--- a/drivers/message/fusion/mptbase.h
+++ b/drivers/message/fusion/mptbase.h
@@ -5,7 +5,7 @@
  *          LSIFC9xx/LSI409xx Fibre Channel
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -72,11 +72,11 @@
 #endif
 
 #ifndef COPYRIGHT
-#define COPYRIGHT	"Copyright (c) 1999-2005 " MODULEAUTHOR
+#define COPYRIGHT	"Copyright (c) 1999-2007 " MODULEAUTHOR
 #endif
 
-#define MPT_LINUX_VERSION_COMMON	"3.04.02"
-#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.02"
+#define MPT_LINUX_VERSION_COMMON	"3.04.03"
+#define MPT_LINUX_PACKAGE_NAME		"@(#)mptlinux-3.04.03"
 #define WHAT_MAGIC_STRING		"@" "(" "#" ")"
 
 #define show_mptmod_ver(s,ver)  \
@@ -1059,7 +1059,7 @@
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 #endif		/* } __KERNEL__ */
 
-#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__)
+#if defined(__alpha__) || defined(__sparc_v9__) || defined(__ia64__) || defined(__x86_64__) || defined(__powerpc__)
 #define CAST_U32_TO_PTR(x)	((void *)(u64)x)
 #define CAST_PTR_TO_U32(x)	((u32)(u64)x)
 #else
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index 30975cc..504632d 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -4,7 +4,7 @@
  *      For use with LSI Logic PCI chip/adapters
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -66,7 +66,7 @@
 #include <scsi/scsi_host.h>
 #include <scsi/scsi_tcq.h>
 
-#define COPYRIGHT	"Copyright (c) 1999-2005 LSI Logic Corporation"
+#define COPYRIGHT	"Copyright (c) 1999-2007 LSI Logic Corporation"
 #define MODULEAUTHOR	"LSI Logic Corporation"
 #include "mptbase.h"
 #include "mptctl.h"
@@ -79,6 +79,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
diff --git a/drivers/message/fusion/mptctl.h b/drivers/message/fusion/mptctl.h
index 0439418..e65a1cf 100644
--- a/drivers/message/fusion/mptctl.h
+++ b/drivers/message/fusion/mptctl.h
@@ -5,7 +5,7 @@
  *          LSIFC9xx/LSI409xx Fibre Channel
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index ca2f910..c819c23 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -3,7 +3,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -75,6 +75,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /* Command line args */
 #define MPTFC_DEV_LOSS_TMO (60)
diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
index b7c4407..2936204 100644
--- a/drivers/message/fusion/mptlan.c
+++ b/drivers/message/fusion/mptlan.c
@@ -4,7 +4,7 @@
  *      For use with LSI Logic Fibre Channel PCI chip/adapters
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 2000-2005 LSI Logic Corporation
+ *  Copyright (c) 2000-2007 LSI Logic Corporation
  *
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
@@ -56,9 +56,11 @@
 #include <linux/module.h>
 #include <linux/fs.h>
 
+#define my_VERSION	MPT_LINUX_VERSION_COMMON
 #define MYNAM		"mptlan"
 
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
diff --git a/drivers/message/fusion/mptlan.h b/drivers/message/fusion/mptlan.h
index 3726ecb..70ab75e 100644
--- a/drivers/message/fusion/mptlan.h
+++ b/drivers/message/fusion/mptlan.h
@@ -4,7 +4,7 @@
  *      For use with LSI Logic Fibre Channel PCI chip/adapters
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 2000-2005 LSI Logic Corporation
+ *  Copyright (c) 2000-2007 LSI Logic Corporation
  *
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4f0c530..09e9a9d 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3,9 +3,9 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
- *  Copyright (c) 2005-2006 Dell
+ *  Copyright (c) 2005-2007 Dell
  */
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 /*
@@ -75,6 +75,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 static int mpt_pt_clear;
 module_param(mpt_pt_clear, int, 0);
@@ -245,7 +246,8 @@
 	printk("Parent Handle=0x%X\n" ,le16_to_cpu(pg0->ParentDevHandle));
 	printk("Enclosure Handle=0x%X\n", le16_to_cpu(pg0->EnclosureHandle));
 	printk("Slot=0x%X\n", le16_to_cpu(pg0->Slot));
-	printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
+	printk("SAS Address=0x%llX\n", (unsigned long long)
+	    le64_to_cpu(sas_address));
 	printk("Target ID=0x%X\n", pg0->TargetID);
 	printk("Bus=0x%X\n", pg0->Bus);
 	/* The PhyNum field specifies the PHY number of the parent
@@ -349,9 +351,9 @@
 	phy_info = port_info->phy_info;
 
 	dsaswideprintk((KERN_DEBUG "%s: [%p]: num_phys=%02d "
-	    	"bitmask=0x%016llX\n",
-		__FUNCTION__, port_details, port_details->num_phys,
-		    port_details->phy_bitmask));
+	    "bitmask=0x%016llX\n", __FUNCTION__, port_details,
+	    port_details->num_phys, (unsigned long long)
+	    port_details->phy_bitmask));
 
 	for (i = 0; i < port_info->num_phys; i++, phy_info++) {
 		if(phy_info->port_details != port_details)
@@ -476,7 +478,7 @@
 	for (i = 0 ; i < port_info->num_phys ; i++, phy_info++) {
 		sas_address = phy_info->attached.sas_address;
 		dsaswideprintk((KERN_DEBUG "phy_id=%d sas_address=0x%018llX\n",
-			i, sas_address));
+		    i, (unsigned long long)sas_address));
 		if (!sas_address)
 			continue;
 		port_details = phy_info->port_details;
@@ -495,8 +497,8 @@
 				    (1 << phy_info->phy_id);
 			phy_info->sas_port_add_phy=1;
 			dsaswideprintk((KERN_DEBUG "\t\tForming port\n\t\t"
-				"phy_id=%d sas_address=0x%018llX\n",
-				i, sas_address));
+			    "phy_id=%d sas_address=0x%018llX\n",
+			    i, (unsigned long long)sas_address));
 			phy_info->port_details = port_details;
 		}
 
@@ -512,8 +514,9 @@
 			if (phy_info_cmp->port_details == port_details )
 				continue;
 			dsaswideprintk((KERN_DEBUG
-				"\t\tphy_id=%d sas_address=0x%018llX\n",
-				j, phy_info_cmp->attached.sas_address));
+			    "\t\tphy_id=%d sas_address=0x%018llX\n",
+			    j, (unsigned long long)
+			    phy_info_cmp->attached.sas_address));
 			if (phy_info_cmp->port_details) {
 				port_details->rphy =
 				    mptsas_get_rphy(phy_info_cmp);
@@ -546,11 +549,10 @@
 		if (!port_details)
 			continue;
 		dsaswideprintk((KERN_DEBUG
-			"%s: [%p]: phy_id=%02d num_phys=%02d "
-		    	"bitmask=0x%016llX\n",
-			__FUNCTION__,
-			port_details, i, port_details->num_phys,
-			port_details->phy_bitmask));
+		    "%s: [%p]: phy_id=%02d num_phys=%02d "
+		    "bitmask=0x%016llX\n", __FUNCTION__,
+		    port_details, i, port_details->num_phys,
+		    (unsigned long long)port_details->phy_bitmask));
 		dsaswideprintk((KERN_DEBUG"\t\tport = %p rphy=%p\n",
 			port_details->port, port_details->rphy));
 	}
@@ -2079,8 +2081,10 @@
 static void
 mptsas_reprobe_lun(struct scsi_device *sdev, void *data)
 {
+	int rc;
+
 	sdev->no_uld_attach = data ? 1 : 0;
-	scsi_device_reprobe(sdev);
+	rc = scsi_device_reprobe(sdev);
 }
 
 static void
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index 2c72c36..f0cca3e 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -3,7 +3,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -76,6 +76,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
 
@@ -701,6 +702,17 @@
 						break;
 					}
 				}
+			} else if (ioc->bus_type == FC) {
+				/*
+				 * The FC IOC may kill a request for variety of
+				 * reasons, some of which may be recovered by a
+				 * retry, some which are unlikely to be
+				 * recovered. Return DID_ERROR instead of
+				 * DID_RESET to permit retry of the command,
+				 * just not an infinite number of them
+				 */
+				sc->result = DID_ERROR << 16;
+				break;
 			}
 
 			/*
@@ -2688,7 +2700,8 @@
 		    struct scsi_device *sdev)
 {
 	dinitprintk((MYIOC_s_INFO_FMT "initTarget bus=%d id=%d lun=%d hd=%p\n",
-		hd->ioc->name, vtarget->bus_id, vtarget->target_id, lun, hd));
+		hd->ioc->name, vtarget->bus_id, vtarget->target_id,
+		sdev->lun, hd));
 
 	/* Is LUN supported? If so, upper 2 bits will be 0
 	* in first byte of inquiry data.
@@ -2770,7 +2783,7 @@
 				else {
 					factor = MPT_ULTRA320;
 					if (scsi_device_qas(sdev)) {
-						ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", byte56, id));
+						ddvtprintk((KERN_INFO "Enabling QAS due to byte56=%02x on id=%d!\n", scsi_device_qas(sdev), id));
 						noQas = 0;
 					}
 					if (sdev->type == TYPE_TAPE &&
diff --git a/drivers/message/fusion/mptscsih.h b/drivers/message/fusion/mptscsih.h
index 14a5b6c..187c8af 100644
--- a/drivers/message/fusion/mptscsih.h
+++ b/drivers/message/fusion/mptscsih.h
@@ -5,7 +5,7 @@
  *          LSIFC9xx/LSI409xx Fibre Channel
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
diff --git a/drivers/message/fusion/mptspi.c b/drivers/message/fusion/mptspi.c
index 36641da..203c661 100644
--- a/drivers/message/fusion/mptspi.c
+++ b/drivers/message/fusion/mptspi.c
@@ -3,7 +3,7 @@
  *      For use with LSI Logic PCI chip/adapter(s)
  *      running LSI Logic Fusion MPT (Message Passing Technology) firmware.
  *
- *  Copyright (c) 1999-2005 LSI Logic Corporation
+ *  Copyright (c) 1999-2007 LSI Logic Corporation
  *  (mailto:mpt_linux_developer@lsil.com)
  *
  */
@@ -77,6 +77,7 @@
 MODULE_AUTHOR(MODULEAUTHOR);
 MODULE_DESCRIPTION(my_NAME);
 MODULE_LICENSE("GPL");
+MODULE_VERSION(my_VERSION);
 
 /* Command line args */
 static int mpt_saf_te = MPTSCSIH_SAF_TE;
diff --git a/drivers/mmc/imxmmc.c b/drivers/mmc/imxmmc.c
index 06e7fcd..bfb9ff6 100644
--- a/drivers/mmc/imxmmc.c
+++ b/drivers/mmc/imxmmc.c
@@ -351,9 +351,6 @@
 	case MMC_RSP_R3: /* short */
 		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R3;
 		break;
-	case MMC_RSP_R6: /* short CRC */
-		cmdat |= CMD_DAT_CONT_RESPONSE_FORMAT_R6;
-		break;
 	default:
 		break;
 	}
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
index 9488408..d30540b 100644
--- a/drivers/mmc/omap.c
+++ b/drivers/mmc/omap.c
@@ -91,7 +91,6 @@
 
 
 #define DRIVER_NAME "mmci-omap"
-#define RSP_TYPE(x)	((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
 
 /* Specifies how often in millisecs to poll for card status changes
  * when the cover switch is open */
@@ -204,18 +203,22 @@
 	cmdtype = 0;
 
 	/* Our hardware needs to know exact type */
-	switch (RSP_TYPE(mmc_resp_type(cmd))) {
-	case RSP_TYPE(MMC_RSP_R1):
-		/* resp 1, resp 1b */
+	switch (mmc_resp_type(cmd)) {
+	case MMC_RSP_NONE:
+		break;
+	case MMC_RSP_R1:
+	case MMC_RSP_R1B:
+		/* resp 1, 1b, 6, 7 */
 		resptype = 1;
 		break;
-	case RSP_TYPE(MMC_RSP_R2):
+	case MMC_RSP_R2:
 		resptype = 2;
 		break;
-	case RSP_TYPE(MMC_RSP_R3):
+	case MMC_RSP_R3:
 		resptype = 3;
 		break;
 	default:
+		dev_err(mmc_dev(host->mmc), "Invalid response type: %04x\n", mmc_resp_type(cmd));
 		break;
 	}
 
diff --git a/drivers/mmc/pxamci.c b/drivers/mmc/pxamci.c
index 45a9283..6073d99 100644
--- a/drivers/mmc/pxamci.c
+++ b/drivers/mmc/pxamci.c
@@ -171,7 +171,7 @@
 
 #define RSP_TYPE(x)	((x) & ~(MMC_RSP_BUSY|MMC_RSP_OPCODE))
 	switch (RSP_TYPE(mmc_resp_type(cmd))) {
-	case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6 */
+	case RSP_TYPE(MMC_RSP_R1): /* r1, r1b, r6, r7 */
 		cmdat |= CMDAT_RESP_SHORT;
 		break;
 	case RSP_TYPE(MMC_RSP_R3):
diff --git a/drivers/mmc/tifm_sd.c b/drivers/mmc/tifm_sd.c
index f18ad99..fa4a528 100644
--- a/drivers/mmc/tifm_sd.c
+++ b/drivers/mmc/tifm_sd.c
@@ -173,9 +173,6 @@
 	case MMC_RSP_R3:
 		rc |= TIFM_MMCSD_RSP_R3;
 		break;
-	case MMC_RSP_R6:
-		rc |= TIFM_MMCSD_RSP_R6;
-		break;
 	default:
 		BUG();
 	}
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index e2cb19b..6f93a76 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -765,17 +765,18 @@
 	struct cp_private *cp = netdev_priv(dev);
 	unsigned entry;
 	u32 eor, flags;
+	unsigned long intr_flags;
 #if CP_VLAN_TAG_USED
 	u32 vlan_tag = 0;
 #endif
 	int mss = 0;
 
-	spin_lock_irq(&cp->lock);
+	spin_lock_irqsave(&cp->lock, intr_flags);
 
 	/* This is a hard error, log it. */
 	if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
 		netif_stop_queue(dev);
-		spin_unlock_irq(&cp->lock);
+		spin_unlock_irqrestore(&cp->lock, intr_flags);
 		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
 		       dev->name);
 		return 1;
@@ -908,7 +909,7 @@
 	if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
 		netif_stop_queue(dev);
 
-	spin_unlock_irq(&cp->lock);
+	spin_unlock_irqrestore(&cp->lock, intr_flags);
 
 	cpw8(TxPoll, NormalTxPoll);
 	dev->trans_start = jiffies;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index 07cf574..61cbd4a 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -71,7 +71,7 @@
 #include "myri10ge_mcp.h"
 #include "myri10ge_mcp_gen_header.h"
 
-#define MYRI10GE_VERSION_STR "1.1.0"
+#define MYRI10GE_VERSION_STR "1.2.0"
 
 MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
 MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -274,6 +274,10 @@
 module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
 
+static int myri10ge_wcfifo = 1;
+module_param(myri10ge_wcfifo, int, S_IRUGO);
+MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
+
 #define MYRI10GE_FW_OFFSET 1024*1024
 #define MYRI10GE_HIGHPART_TO_U32(X) \
 (sizeof (X) == 8) ? ((u32)((u64)(X) >> 32)) : (0)
@@ -1714,7 +1718,7 @@
 		goto abort_with_irq;
 	}
 
-	if (mgp->mtrr >= 0) {
+	if (myri10ge_wcfifo && mgp->mtrr >= 0) {
 		mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
 		mgp->rx_small.wc_fifo =
 		    (u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
@@ -2878,7 +2882,6 @@
 	netdev->hard_start_xmit = myri10ge_xmit;
 	netdev->get_stats = myri10ge_get_stats;
 	netdev->base_addr = mgp->iomem_base;
-	netdev->irq = pdev->irq;
 	netdev->change_mtu = myri10ge_change_mtu;
 	netdev->set_multicast_list = myri10ge_set_multicast_list;
 	netdev->set_mac_address = myri10ge_set_mac_address;
@@ -2888,6 +2891,15 @@
 	netdev->poll = myri10ge_poll;
 	netdev->weight = myri10ge_napi_weight;
 
+	/* make sure we can get an irq, and that MSI can be
+	 * setup (if available).  Also ensure netdev->irq
+	 * is set to correct value if MSI is enabled */
+	status = myri10ge_request_irq(mgp);
+	if (status != 0)
+		goto abort_with_firmware;
+	netdev->irq = pdev->irq;
+	myri10ge_free_irq(mgp);
+
 	/* Save configuration space to be restored if the
 	 * nic resets due to a parity error */
 	pci_save_state(pdev);
@@ -2903,8 +2915,9 @@
 		dev_err(&pdev->dev, "register_netdev failed: %d\n", status);
 		goto abort_with_state;
 	}
-	dev_info(dev, "%d, tx bndry %d, fw %s, WC %s\n",
-		 pdev->irq, mgp->tx.boundary, mgp->fw_name,
+	dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
+		 (mgp->msi_enabled ? "MSI" : "xPIC"),
+		 netdev->irq, mgp->tx.boundary, mgp->fw_name,
 		 (mgp->mtrr >= 0 ? "Enabled" : "Disabled"));
 
 	return 0;
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index b70ed79..45d91b1 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -1562,7 +1562,7 @@
 	for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
 		__le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
 
-		((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+		((u16 *)dev->dev_addr)[i] = le16_to_cpu(w);
 	}
 
 	sis190_set_rgmii(tp, sis190_read_eeprom(ioaddr, EEPROMInfo));
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 8243150..7e4b23c 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -29,6 +29,7 @@
 #include <linux/fsl_devices.h>
 #include <linux/ethtool.h>
 #include <linux/mii.h>
+#include <linux/workqueue.h>
 
 #include <asm/of_platform.h>
 #include <asm/uaccess.h>
@@ -472,7 +473,7 @@
 	kfree(enet_addr_cont);
 }
 
-static int set_mac_addr(__be16 __iomem *reg, u8 *mac)
+static void set_mac_addr(__be16 __iomem *reg, u8 *mac)
 {
 	out_be16(&reg[0], ((u16)mac[5] << 8) | mac[4]);
 	out_be16(&reg[1], ((u16)mac[3] << 8) | mac[2]);
@@ -3920,10 +3921,11 @@
 }
 
 /* Scheduled by the phy_interrupt/timer to handle PHY changes */
-static void ugeth_phy_change(void *data)
+static void ugeth_phy_change(struct work_struct *work)
 {
-	struct net_device *dev = (struct net_device *)data;
-	struct ucc_geth_private *ugeth = netdev_priv(dev);
+	struct ucc_geth_private *ugeth =
+		container_of(work, struct ucc_geth_private, tq);
+	struct net_device *dev = ugeth->dev;
 	struct ucc_geth *ug_regs;
 	int result = 0;
 
@@ -4080,7 +4082,7 @@
 #endif				/* CONFIG_UGETH_NAPI */
 
 	/* Set up the PHY change work queue */
-	INIT_WORK(&ugeth->tq, ugeth_phy_change, dev);
+	INIT_WORK(&ugeth->tq, ugeth_phy_change);
 
 	init_timer(&ugeth->phy_info_timer);
 	ugeth->phy_info_timer.function = &ugeth_phy_startup_timer;
diff --git a/drivers/net/ucc_geth_phy.c b/drivers/net/ucc_geth_phy.c
index 5360ec0..3c86592 100644
--- a/drivers/net/ucc_geth_phy.c
+++ b/drivers/net/ucc_geth_phy.c
@@ -68,8 +68,31 @@
 static int genmii_config_aneg(struct ugeth_mii_info *mii_info);
 static int genmii_update_link(struct ugeth_mii_info *mii_info);
 static int genmii_read_status(struct ugeth_mii_info *mii_info);
-u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum);
-void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val);
+
+static u16 ucc_geth_phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
+{
+	u16 retval;
+	unsigned long flags;
+
+	ugphy_vdbg("%s: IN", __FUNCTION__);
+
+	spin_lock_irqsave(&mii_info->mdio_lock, flags);
+	retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
+	spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
+
+	return retval;
+}
+
+static void ucc_geth_phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
+{
+	unsigned long flags;
+
+	ugphy_vdbg("%s: IN", __FUNCTION__);
+
+	spin_lock_irqsave(&mii_info->mdio_lock, flags);
+	mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
+	spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
+}
 
 /* Write value to the PHY for this device to the register at regnum, */
 /* waiting until the write is done before it returns.  All PHY */
@@ -184,7 +207,7 @@
 	advertise = mii_info->advertising;
 
 	/* Setup standard advertisement */
-	adv = phy_read(mii_info, MII_ADVERTISE);
+	adv = ucc_geth_phy_read(mii_info, MII_ADVERTISE);
 	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
 	if (advertise & ADVERTISED_10baseT_Half)
 		adv |= ADVERTISE_10HALF;
@@ -194,7 +217,7 @@
 		adv |= ADVERTISE_100HALF;
 	if (advertise & ADVERTISED_100baseT_Full)
 		adv |= ADVERTISE_100FULL;
-	phy_write(mii_info, MII_ADVERTISE, adv);
+	ucc_geth_phy_write(mii_info, MII_ADVERTISE, adv);
 }
 
 static void genmii_setup_forced(struct ugeth_mii_info *mii_info)
@@ -204,7 +227,7 @@
 
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
-	ctrl = phy_read(mii_info, MII_BMCR);
+	ctrl = ucc_geth_phy_read(mii_info, MII_BMCR);
 
 	ctrl &=
 	    ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
@@ -234,7 +257,7 @@
 		break;
 	}
 
-	phy_write(mii_info, MII_BMCR, ctrl);
+	ucc_geth_phy_write(mii_info, MII_BMCR, ctrl);
 }
 
 /* Enable and Restart Autonegotiation */
@@ -244,9 +267,9 @@
 
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
-	ctl = phy_read(mii_info, MII_BMCR);
+	ctl = ucc_geth_phy_read(mii_info, MII_BMCR);
 	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
-	phy_write(mii_info, MII_BMCR, ctl);
+	ucc_geth_phy_write(mii_info, MII_BMCR, ctl);
 }
 
 static int gbit_config_aneg(struct ugeth_mii_info *mii_info)
@@ -261,14 +284,14 @@
 		config_genmii_advert(mii_info);
 		advertise = mii_info->advertising;
 
-		adv = phy_read(mii_info, MII_1000BASETCONTROL);
+		adv = ucc_geth_phy_read(mii_info, MII_1000BASETCONTROL);
 		adv &= ~(MII_1000BASETCONTROL_FULLDUPLEXCAP |
 			 MII_1000BASETCONTROL_HALFDUPLEXCAP);
 		if (advertise & SUPPORTED_1000baseT_Half)
 			adv |= MII_1000BASETCONTROL_HALFDUPLEXCAP;
 		if (advertise & SUPPORTED_1000baseT_Full)
 			adv |= MII_1000BASETCONTROL_FULLDUPLEXCAP;
-		phy_write(mii_info, MII_1000BASETCONTROL, adv);
+		ucc_geth_phy_write(mii_info, MII_1000BASETCONTROL, adv);
 
 		/* Start/Restart aneg */
 		genmii_restart_aneg(mii_info);
@@ -298,10 +321,10 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	/* Do a fake read */
-	phy_read(mii_info, MII_BMSR);
+	ucc_geth_phy_read(mii_info, MII_BMSR);
 
 	/* Read link and autonegotiation status */
-	status = phy_read(mii_info, MII_BMSR);
+	status = ucc_geth_phy_read(mii_info, MII_BMSR);
 	if ((status & BMSR_LSTATUS) == 0)
 		mii_info->link = 0;
 	else
@@ -329,7 +352,7 @@
 		return err;
 
 	if (mii_info->autoneg) {
-		status = phy_read(mii_info, MII_LPA);
+		status = ucc_geth_phy_read(mii_info, MII_LPA);
 
 		if (status & (LPA_10FULL | LPA_100FULL))
 			mii_info->duplex = DUPLEX_FULL;
@@ -352,9 +375,9 @@
 {
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
-	phy_write(mii_info, 0x14, 0x0cd2);
-	phy_write(mii_info, MII_BMCR,
-		  phy_read(mii_info, MII_BMCR) | BMCR_RESET);
+	ucc_geth_phy_write(mii_info, 0x14, 0x0cd2);
+	ucc_geth_phy_write(mii_info, MII_BMCR,
+		  ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
 	msleep(4000);
 
 	return 0;
@@ -367,13 +390,13 @@
 	/* The Marvell PHY has an errata which requires
 	 * that certain registers get written in order
 	 * to restart autonegotiation */
-	phy_write(mii_info, MII_BMCR, BMCR_RESET);
+	ucc_geth_phy_write(mii_info, MII_BMCR, BMCR_RESET);
 
-	phy_write(mii_info, 0x1d, 0x1f);
-	phy_write(mii_info, 0x1e, 0x200c);
-	phy_write(mii_info, 0x1d, 0x5);
-	phy_write(mii_info, 0x1e, 0);
-	phy_write(mii_info, 0x1e, 0x100);
+	ucc_geth_phy_write(mii_info, 0x1d, 0x1f);
+	ucc_geth_phy_write(mii_info, 0x1e, 0x200c);
+	ucc_geth_phy_write(mii_info, 0x1d, 0x5);
+	ucc_geth_phy_write(mii_info, 0x1e, 0);
+	ucc_geth_phy_write(mii_info, 0x1e, 0x100);
 
 	gbit_config_aneg(mii_info);
 
@@ -398,7 +421,7 @@
 	 * are as set */
 	if (mii_info->autoneg && mii_info->link) {
 		int speed;
-		status = phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
+		status = ucc_geth_phy_read(mii_info, MII_M1011_PHY_SPEC_STATUS);
 
 		/* Get the duplexity */
 		if (status & MII_M1011_PHY_SPEC_STATUS_FULLDUPLEX)
@@ -430,7 +453,7 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	/* Clear the interrupts by reading the reg */
-	phy_read(mii_info, MII_M1011_IEVENT);
+	ucc_geth_phy_read(mii_info, MII_M1011_IEVENT);
 
 	return 0;
 }
@@ -440,9 +463,9 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
-		phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+		ucc_geth_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
 	else
-		phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+		ucc_geth_phy_write(mii_info, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
 
 	return 0;
 }
@@ -451,9 +474,9 @@
 {
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
-	phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
+	ucc_geth_phy_write(mii_info, MII_CIS8201_AUX_CONSTAT,
 		  MII_CIS8201_AUXCONSTAT_INIT);
-	phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
+	ucc_geth_phy_write(mii_info, MII_CIS8201_EXT_CON1, MII_CIS8201_EXTCON1_INIT);
 
 	return 0;
 }
@@ -477,7 +500,7 @@
 	if (mii_info->autoneg && mii_info->link) {
 		int speed;
 
-		status = phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
+		status = ucc_geth_phy_read(mii_info, MII_CIS8201_AUX_CONSTAT);
 		if (status & MII_CIS8201_AUXCONSTAT_DUPLEX)
 			mii_info->duplex = DUPLEX_FULL;
 		else
@@ -505,7 +528,7 @@
 {
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
-	phy_read(mii_info, MII_CIS8201_ISTAT);
+	ucc_geth_phy_read(mii_info, MII_CIS8201_ISTAT);
 
 	return 0;
 }
@@ -515,9 +538,9 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
-		phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
+		ucc_geth_phy_write(mii_info, MII_CIS8201_IMASK, MII_CIS8201_IMASK_MASK);
 	else
-		phy_write(mii_info, MII_CIS8201_IMASK, 0);
+		ucc_geth_phy_write(mii_info, MII_CIS8201_IMASK, 0);
 
 	return 0;
 }
@@ -541,7 +564,7 @@
 	/* If we aren't autonegotiating, assume speeds
 	 * are as set */
 	if (mii_info->autoneg && mii_info->link) {
-		status = phy_read(mii_info, MII_DM9161_SCSR);
+		status = ucc_geth_phy_read(mii_info, MII_DM9161_SCSR);
 		if (status & (MII_DM9161_SCSR_100F | MII_DM9161_SCSR_100H))
 			mii_info->speed = SPEED_100;
 		else
@@ -572,7 +595,7 @@
 {
 	struct ugeth_mii_info *mii_info = (struct ugeth_mii_info *)data;
 	struct dm9161_private *priv = mii_info->priv;
-	u16 status = phy_read(mii_info, MII_BMSR);
+	u16 status = ucc_geth_phy_read(mii_info, MII_BMSR);
 
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
@@ -599,11 +622,11 @@
 	/* Reset is not done yet */
 	priv->resetdone = 0;
 
-	phy_write(mii_info, MII_BMCR,
-		  phy_read(mii_info, MII_BMCR) | BMCR_RESET);
+	ucc_geth_phy_write(mii_info, MII_BMCR,
+		  ucc_geth_phy_read(mii_info, MII_BMCR) | BMCR_RESET);
 
-	phy_write(mii_info, MII_BMCR,
-		  phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
+	ucc_geth_phy_write(mii_info, MII_BMCR,
+		  ucc_geth_phy_read(mii_info, MII_BMCR) & ~BMCR_ISOLATE);
 
 	config_genmii_advert(mii_info);
 	/* Start/Restart aneg */
@@ -634,7 +657,7 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	/* Clear the interrupts by reading the reg */
-	phy_read(mii_info, MII_DM9161_INTR);
+	ucc_geth_phy_read(mii_info, MII_DM9161_INTR);
 
 
 	return 0;
@@ -645,9 +668,9 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	if (mii_info->interrupts == MII_INTERRUPT_ENABLED)
-		phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
+		ucc_geth_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_INIT);
 	else
-		phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
+		ucc_geth_phy_write(mii_info, MII_DM9161_INTR, MII_DM9161_INTR_STOP);
 
 	return 0;
 }
@@ -718,31 +741,6 @@
 	NULL
 };
 
-u16 phy_read(struct ugeth_mii_info *mii_info, u16 regnum)
-{
-	u16 retval;
-	unsigned long flags;
-
-	ugphy_vdbg("%s: IN", __FUNCTION__);
-
-	spin_lock_irqsave(&mii_info->mdio_lock, flags);
-	retval = mii_info->mdio_read(mii_info->dev, mii_info->mii_id, regnum);
-	spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-
-	return retval;
-}
-
-void phy_write(struct ugeth_mii_info *mii_info, u16 regnum, u16 val)
-{
-	unsigned long flags;
-
-	ugphy_vdbg("%s: IN", __FUNCTION__);
-
-	spin_lock_irqsave(&mii_info->mdio_lock, flags);
-	mii_info->mdio_write(mii_info->dev, mii_info->mii_id, regnum, val);
-	spin_unlock_irqrestore(&mii_info->mdio_lock, flags);
-}
-
 /* Use the PHY ID registers to determine what type of PHY is attached
  * to device dev.  return a struct phy_info structure describing that PHY
  */
@@ -757,11 +755,11 @@
 	ugphy_vdbg("%s: IN", __FUNCTION__);
 
 	/* Grab the bits from PHYIR1, and put them in the upper half */
-	phy_reg = phy_read(mii_info, MII_PHYSID1);
+	phy_reg = ucc_geth_phy_read(mii_info, MII_PHYSID1);
 	phy_ID = (phy_reg & 0xffff) << 16;
 
 	/* Grab the bits from PHYIR2, and put them in the lower half */
-	phy_reg = phy_read(mii_info, MII_PHYSID2);
+	phy_reg = ucc_geth_phy_read(mii_info, MII_PHYSID2);
 	phy_ID |= (phy_reg & 0xffff);
 
 	/* loop through all the known PHY types, and find one that */
diff --git a/drivers/net/wireless/bcm43xx/bcm43xx_main.c b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
index 2ec2e5a..91b752e 100644
--- a/drivers/net/wireless/bcm43xx/bcm43xx_main.c
+++ b/drivers/net/wireless/bcm43xx/bcm43xx_main.c
@@ -2701,8 +2701,8 @@
 		sb_id_hi = bcm43xx_read32(bcm, BCM43xx_CIR_SB_ID_HI);
 
 		/* extract core_id, core_rev, core_vendor */
-		core_id = (sb_id_hi & 0xFFF0) >> 4;
-		core_rev = (sb_id_hi & 0xF);
+		core_id = (sb_id_hi & 0x8FF0) >> 4;
+		core_rev = ((sb_id_hi & 0xF) | ((sb_id_hi & 0x7000) >> 8));
 		core_vendor = (sb_id_hi & 0xFFFF0000) >> 16;
 
 		dprintk(KERN_INFO PFX "Core %d: ID 0x%x, rev 0x%x, vendor 0x%x\n",
@@ -2873,7 +2873,10 @@
 		sbimconfiglow = bcm43xx_read32(bcm, BCM43xx_CIR_SBIMCONFIGLOW);
 		sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_REQUEST_TOUT_MASK;
 		sbimconfiglow &= ~ BCM43xx_SBIMCONFIGLOW_SERVICE_TOUT_MASK;
-		sbimconfiglow |= 0x32;
+		if (bcm->bustype == BCM43xx_BUSTYPE_PCI)
+			sbimconfiglow |= 0x32;
+		else
+			sbimconfiglow |= 0x53;
 		bcm43xx_write32(bcm, BCM43xx_CIR_SBIMCONFIGLOW, sbimconfiglow);
 	}
 
@@ -3077,7 +3080,7 @@
 	if (err)
 		goto out;
 
-	if (bcm->current_core->rev < 6 ||
+	if (bcm->current_core->rev < 6 &&
 		bcm->current_core->id == BCM43xx_COREID_PCI) {
 		value = bcm43xx_read32(bcm, BCM43xx_CIR_SBINTVEC);
 		value |= (1 << backplane_flag_nr);
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index b8d2385..92d5e8d 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -150,8 +150,7 @@
 }
 
 /**
- * pci_match_device - Tell if a PCI device structure has a matching
- *                    PCI device id structure
+ * pci_match_device - Tell if a PCI device structure has a matching PCI device id structure
  * @drv: the PCI driver to match against
  * @dev: the PCI device structure to match against
  *
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 0a70943..ef882a8 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1002,6 +1002,11 @@
 			case 0x186a: /* M6Ne notebook */
 				asus_hides_smbus = 1;
 			}
+		if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+			switch (dev->subsystem_device) {
+			case 0x80f2: /* P4P800-X */
+				asus_hides_smbus = 1;
+			}
 		if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
 			switch (dev->subsystem_device) {
 			case 0x1882: /* M6V notebook */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index 99a259c..e1b44d6 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -6,7 +6,7 @@
    		     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
                      Brad Strand <linux@3ware.com>
 
-   Copyright (C) 1999-2005 3ware Inc.
+   Copyright (C) 1999-2007 3ware Inc.
 
    Kernel compatiblity By: 	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
@@ -191,6 +191,9 @@
                  before shutting down card.
                  Change to new 'change_queue_depth' api.
                  Fix 'handled=1' ISR usage, remove bogus IRQ check.
+   1.26.02.002 - Free irq handler in __tw_shutdown().
+                 Turn on RCD bit for caching mode page.
+                 Serialize reset code.
 */
 
 #include <linux/module.h>
@@ -214,7 +217,7 @@
 #include "3w-xxxx.h"
 
 /* Globals */
-#define TW_DRIVER_VERSION "1.26.02.001"
+#define TW_DRIVER_VERSION "1.26.02.002"
 static TW_Device_Extension *tw_device_extension_list[TW_MAX_SLOT];
 static int tw_device_extension_count = 0;
 static int twe_major = -1;
@@ -226,7 +229,7 @@
 MODULE_VERSION(TW_DRIVER_VERSION);
 
 /* Function prototypes */
-static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset);
+static int tw_reset_device_extension(TW_Device_Extension *tw_dev);
 
 /* Functions */
 
@@ -984,24 +987,12 @@
 			/* Now wait for the command to complete */
 			timeout = wait_event_timeout(tw_dev->ioctl_wqueue, tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE, timeout);
 
-			/* See if we reset while waiting for the ioctl to complete */
-			if (test_bit(TW_IN_RESET, &tw_dev->flags)) {
-				clear_bit(TW_IN_RESET, &tw_dev->flags);
-				retval = -ERESTARTSYS;
-				goto out2;
-			}
-
 			/* We timed out, and didn't get an interrupt */
 			if (tw_dev->chrdev_request_id != TW_IOCTL_CHRDEV_FREE) {
 				/* Now we need to reset the board */
 				printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
 				retval = -EIO;
-				spin_lock_irqsave(tw_dev->host->host_lock, flags);
-				tw_dev->state[request_id] = TW_S_COMPLETED;
-				tw_state_request_finish(tw_dev, request_id);
-				tw_dev->posted_request_count--;
-				spin_unlock_irqrestore(tw_dev->host->host_lock, flags);
-				if (tw_reset_device_extension(tw_dev, 1)) {
+				if (tw_reset_device_extension(tw_dev)) {
 					printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
 				}
 				goto out2;
@@ -1336,7 +1327,7 @@
 } /* End tw_unmap_scsi_data() */
 
 /* This function will reset a device extension */
-static int tw_reset_device_extension(TW_Device_Extension *tw_dev, int ioctl_reset) 
+static int tw_reset_device_extension(TW_Device_Extension *tw_dev)
 {
 	int i = 0;
 	struct scsi_cmnd *srb;
@@ -1382,15 +1373,10 @@
 		printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
 		return 1;
 	}
-	TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
 
-	/* Wake up any ioctl that was pending before the reset */
-	if ((tw_dev->chrdev_request_id == TW_IOCTL_CHRDEV_FREE) || (ioctl_reset)) {
-		clear_bit(TW_IN_RESET, &tw_dev->flags);
-	} else {
-		tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
-		wake_up(&tw_dev->ioctl_wqueue);
-	}
+	TW_ENABLE_AND_CLEAR_INTERRUPTS(tw_dev);
+	clear_bit(TW_IN_RESET, &tw_dev->flags);
+	tw_dev->chrdev_request_id = TW_IOCTL_CHRDEV_FREE;
 
 	return 0;
 } /* End tw_reset_device_extension() */
@@ -1437,14 +1423,18 @@
 		"WARNING: Command (0x%x) timed out, resetting card.\n",
 		SCpnt->cmnd[0]);
 
+	/* Make sure we are not issuing an ioctl or resetting from ioctl */
+	mutex_lock(&tw_dev->ioctl_lock);
+
 	/* Now reset the card and some of the device extension data */
-	if (tw_reset_device_extension(tw_dev, 0)) {
+	if (tw_reset_device_extension(tw_dev)) {
 		printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
 		goto out;
 	}
 
 	retval = SUCCESS;
 out:
+	mutex_unlock(&tw_dev->ioctl_lock);
 	return retval;
 } /* End tw_scsi_eh_reset() */
 
@@ -1660,9 +1650,9 @@
 	request_buffer[4] = 0x8;        /* caching page */
 	request_buffer[5] = 0xa;        /* page length */
 	if (*flags & 0x1)
-		request_buffer[6] = 0x4;        /* WCE on */
+		request_buffer[6] = 0x5;        /* WCE on, RCD on */
 	else
-		request_buffer[6] = 0x0;        /* WCE off */
+		request_buffer[6] = 0x1;        /* WCE off, RCD on */
 	tw_transfer_internal(tw_dev, request_id, request_buffer,
 			     sizeof(request_buffer));
 
@@ -2012,6 +2002,10 @@
 	int retval = 1;
 	TW_Device_Extension *tw_dev = (TW_Device_Extension *)SCpnt->device->host->hostdata;
 
+	/* If we are resetting due to timed out ioctl, report as busy */
+	if (test_bit(TW_IN_RESET, &tw_dev->flags))
+		return SCSI_MLQUEUE_HOST_BUSY;
+
 	/* Save done function into Scsi_Cmnd struct */
 	SCpnt->scsi_done = done;
 		 
@@ -2100,6 +2094,10 @@
 
 	handled = 1;
 
+	/* If we are resetting, bail */
+	if (test_bit(TW_IN_RESET, &tw_dev->flags))
+		goto tw_interrupt_bail;
+
 	/* Check controller for errors */
 	if (tw_check_bits(status_reg_value)) {
 		dprintk(KERN_WARNING "3w-xxxx: tw_interrupt(): Unexpected bits.\n");
@@ -2276,6 +2274,9 @@
 	/* Disable interrupts */
 	TW_DISABLE_INTERRUPTS(tw_dev);
 
+	/* Free up the IRQ */
+	free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
+
 	printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
 
 	/* Tell the card we are shutting down */
@@ -2444,9 +2445,6 @@
 		twe_major = -1;
 	}
 
-	/* Free up the IRQ */
-	free_irq(tw_dev->tw_pci_dev->irq, tw_dev);
-
 	/* Shutdown the card */
 	__tw_shutdown(tw_dev);
 
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index bbd654a..0742e68 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -6,7 +6,7 @@
    		     Arnaldo Carvalho de Melo <acme@conectiva.com.br>
                      Brad Strand <linux@3ware.com>
 
-   Copyright (C) 1999-2005 3ware Inc.
+   Copyright (C) 1999-2007 3ware Inc.
 
    Kernel compatiblity By:	Andre Hedrick <andre@suse.com>
    Non-Copyright (C) 2000	Andre Hedrick <andre@suse.com>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 60f5827..7869c34 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1303,7 +1303,7 @@
 
 config SCSI_SEAGATE
 	tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
-	depends on X86 && ISA && SCSI && BROKEN
+	depends on X86 && ISA && SCSI
 	---help---
 	  These are 8-bit SCSI controllers; the ST-01 is also supported by
 	  this driver.  It is explained in section 3.9 of the SCSI-HOWTO,
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 359e7dd..d2cf875 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -117,8 +117,8 @@
 	{ 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
 	{ 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
 	{ 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
-	{ 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024R0 (Lancer) */
-	{ 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014R0 (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024RO (Lancer) */
+	{ 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014RO (Lancer) */
 	{ 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */
 	{ 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */
 	{ 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5445AU (Hurricane44) */
@@ -137,15 +137,15 @@
 	{ 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 41 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
 	{ 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 42 }, /* AAR-2610SA PCI SATA 6ch */
 	{ 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 43 }, /* ASR-2240S (SabreExpress) */
-	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005SAS */
+	{ 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005 */
 	{ 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 45 }, /* IBM 8i (AvonPark) */
 	{ 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 45 }, /* IBM 8i (AvonPark Lite) */
 	{ 0x9005, 0x0286, 0x1014, 0x9580, 0, 0, 46 }, /* IBM 8k/8k-l8 (Aurora) */
 	{ 0x9005, 0x0286, 0x1014, 0x9540, 0, 0, 47 }, /* IBM 8k/8k-l4 (Aurora Lite) */
-	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000SAS (BlackBird) */
+	{ 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000 (BlackBird) */
 	{ 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 49 }, /* ASR-4800SAS (Marauder-X) */
 	{ 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 50 }, /* ASR-4805SAS (Marauder-E) */
-	{ 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800SAS (Hurricane44) */
+	{ 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800 (Hurricane44) */
 
 	{ 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 52 }, /* Perc 320/DC*/
 	{ 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 53 }, /* Adaptec 5400S (Mustang)*/
@@ -193,8 +193,8 @@
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2820SA      ", 1 }, /* AAR-2820SA (Intruder) */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2620SA      ", 1 }, /* AAR-2620SA (Intruder) */
 	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "AAR-2420SA      ", 1 }, /* AAR-2420SA (Intruder) */
-	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9024R0       ", 2 }, /* ICP9024R0 (Lancer) */
-	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9014R0       ", 1 }, /* ICP9014R0 (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9024RO       ", 2 }, /* ICP9024RO (Lancer) */
+	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9014RO       ", 1 }, /* ICP9014RO (Lancer) */
 	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9047MA       ", 1 }, /* ICP9047MA (Lancer) */
 	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP9087MA       ", 1 }, /* ICP9087MA (Lancer) */
 	{ aac_rkt_init, "aacraid",  "ICP     ", "ICP5445AU       ", 1 }, /* ICP5445AU (Hurricane44) */
@@ -212,14 +212,14 @@
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2026ZCR     ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "AAR-2610SA      ", 1 }, /* SATA 6Ch (Bearcat) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-2240S       ", 1 }, /* ASR-2240S (SabreExpress) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005SAS     ", 1 }, /* ASR-4005SAS */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4005        ", 1 }, /* ASR-4005 */
 	{ aac_rx_init, "ServeRAID","IBM     ", "ServeRAID 8i    ", 1 }, /* IBM 8i (AvonPark) */
 	{ aac_rkt_init, "ServeRAID","IBM     ", "ServeRAID 8k-l8 ", 1 }, /* IBM 8k/8k-l8 (Aurora) */
 	{ aac_rkt_init, "ServeRAID","IBM     ", "ServeRAID 8k-l4 ", 1 }, /* IBM 8k/8k-l4 (Aurora Lite) */
-	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000SAS     ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
+	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4000        ", 1 }, /* ASR-4000 (BlackBird & AvonPark) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4800SAS     ", 1 }, /* ASR-4800SAS (Marauder-X) */
 	{ aac_rx_init, "aacraid",  "ADAPTEC ", "ASR-4805SAS     ", 1 }, /* ASR-4805SAS (Marauder-E) */
-	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-3800SAS     ", 1 }, /* ASR-3800SAS (Hurricane44) */
+	{ aac_rkt_init, "aacraid",  "ADAPTEC ", "ASR-3800        ", 1 }, /* ASR-3800 (Hurricane44) */
 
 	{ aac_rx_init, "percraid", "DELL    ", "PERC 320/DC     ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
 	{ aac_sa_init, "aacraid",  "ADAPTEC ", "Adaptec 5400S   ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
diff --git a/drivers/scsi/advansys.c b/drivers/scsi/advansys.c
index 2b34435..306bec3 100644
--- a/drivers/scsi/advansys.c
+++ b/drivers/scsi/advansys.c
@@ -18215,6 +18215,7 @@
 }
 MODULE_LICENSE("Dual BSD/GPL");
 
+#ifdef CONFIG_PCI
 /* PCI Devices supported by this driver */
 static struct pci_device_id advansys_pci_tbl[] __devinitdata = {
 	{ PCI_VENDOR_ID_ASP, PCI_DEVICE_ID_ASP_1200A,
@@ -18232,4 +18233,4 @@
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, advansys_pci_tbl);
-
+#endif /* CONFIG_PCI */
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index d0b139c..4376840 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -749,7 +749,7 @@
 				if (!offset)
 					crypto_hash_update(
 							&tcp_conn->rx_hash,
-							&sg[i], 1);
+							&sg[i], sg[i].length);
 				else
 					partial_sg_digest_update(
 							&tcp_conn->rx_hash,
@@ -1777,13 +1777,13 @@
 	tcp_conn->tx_hash.tfm = crypto_alloc_hash("crc32c", 0,
 						  CRYPTO_ALG_ASYNC);
 	tcp_conn->tx_hash.flags = 0;
-	if (!tcp_conn->tx_hash.tfm)
+	if (IS_ERR(tcp_conn->tx_hash.tfm))
 		goto free_tcp_conn;
 
 	tcp_conn->rx_hash.tfm = crypto_alloc_hash("crc32c", 0,
 						  CRYPTO_ALG_ASYNC);
 	tcp_conn->rx_hash.flags = 0;
-	if (!tcp_conn->rx_hash.tfm)
+	if (IS_ERR(tcp_conn->rx_hash.tfm))
 		goto free_tx_tfm;
 
 	return cls_conn;
@@ -2044,13 +2044,11 @@
 		sk = tcp_conn->sock->sk;
 		if (sk->sk_family == PF_INET) {
 			inet = inet_sk(sk);
-			len = sprintf(buf, "%u.%u.%u.%u\n",
+			len = sprintf(buf, NIPQUAD_FMT "\n",
 				      NIPQUAD(inet->daddr));
 		} else {
 			np = inet6_sk(sk);
-			len = sprintf(buf,
-				"%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x\n",
-				NIP6(np->daddr));
+			len = sprintf(buf, NIP6_FMT "\n", NIP6(np->daddr));
 		}
 		mutex_unlock(&conn->xmitmutex);
 		break;
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index e11b23c..d37048c 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -260,7 +260,7 @@
 	}
 
 	if (rhdr->cmd_status == SAM_STAT_CHECK_CONDITION) {
-		int senselen;
+		uint16_t senselen;
 
 		if (datalen < 2) {
 invalid_datalen:
@@ -270,12 +270,12 @@
 			goto out;
 		}
 
-		senselen = (data[0] << 8) | data[1];
+		senselen = be16_to_cpu(*(uint16_t *)data);
 		if (datalen < senselen)
 			goto invalid_datalen;
 
 		memcpy(sc->sense_buffer, data + 2,
-		       min(senselen, SCSI_SENSE_BUFFERSIZE));
+		       min_t(uint16_t, senselen, SCSI_SENSE_BUFFERSIZE));
 		debug_scsi("copied %d bytes of sense\n",
 			   min(senselen, SCSI_SENSE_BUFFERSIZE));
 	}
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index 066292d..ec3bbbd 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -56,6 +56,9 @@
 
 	pool->elements = kmalloc(sizeof(struct lpfc_dmabuf) *
 					 LPFC_MBUF_POOL_SIZE, GFP_KERNEL);
+	if (!pool->elements)
+		goto fail_free_lpfc_mbuf_pool;
+
 	pool->max_count = 0;
 	pool->current_count = 0;
 	for ( i = 0; i < LPFC_MBUF_POOL_SIZE; i++) {
@@ -82,10 +85,11 @@
  fail_free_mbox_pool:
 	mempool_destroy(phba->mbox_mem_pool);
  fail_free_mbuf_pool:
-	while (--i)
+	while (i--)
 		pci_pool_free(phba->lpfc_mbuf_pool, pool->elements[i].virt,
 						 pool->elements[i].phys);
 	kfree(pool->elements);
+ fail_free_lpfc_mbuf_pool:
 	pci_pool_destroy(phba->lpfc_mbuf_pool);
  fail_free_dma_buf_pool:
 	pci_pool_destroy(phba->lpfc_scsi_dma_buf_pool);
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
index 046223b..b5bdd0d 100644
--- a/drivers/scsi/megaraid/megaraid_sas.c
+++ b/drivers/scsi/megaraid/megaraid_sas.c
@@ -13,8 +13,8 @@
  * Version	: v00.00.03.05
  *
  * Authors:
- * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsil.com>
- * 	Sumant Patro		<Sumant.Patro@lsil.com>
+ * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsi.com>
+ * 	Sumant Patro		<Sumant.Patro@lsi.com>
  *
  * List of supported controllers
  *
@@ -45,7 +45,7 @@
 
 MODULE_LICENSE("GPL");
 MODULE_VERSION(MEGASAS_VERSION);
-MODULE_AUTHOR("sreenivas.bagalkote@lsil.com");
+MODULE_AUTHOR("megaraidlinux@lsi.com");
 MODULE_DESCRIPTION("LSI Logic MegaRAID SAS Driver");
 
 /*
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index 16af5b7..1548d42 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -1341,7 +1341,7 @@
 	int host_status = DID_ERROR;
 	uint16_t comp_status = le16_to_cpu(sts->comp_status);
 	uint16_t state_flags = le16_to_cpu(sts->state_flags);
-	uint16_t residual_length = le32_to_cpu(sts->residual_length);
+	uint32_t residual_length = le32_to_cpu(sts->residual_length);
 	uint16_t scsi_status = le16_to_cpu(sts->scsi_status);
 #if DEBUG_QLA1280_INTR
 	static char *reason[] = {
@@ -1413,8 +1413,10 @@
 			       "scsi: Underflow detected - retrying "
 			       "command.\n");
 			host_status = DID_ERROR;
-		} else
+		} else {
+			cp->resid = residual_length;
 			host_status = DID_OK;
+		}
 		break;
 
 	default:
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index c4fc40f..2c10130 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1602,6 +1602,7 @@
 
 #define CT_REJECT_RESPONSE	0x8001
 #define CT_ACCEPT_RESPONSE	0x8002
+#define CT_REASON_INVALID_COMMAND_CODE	0x01
 #define CT_REASON_CANNOT_PERFORM	0x09
 #define CT_EXPL_ALREADY_REGISTERED	0x10
 
@@ -2079,6 +2080,7 @@
 		uint32_t	msi_enabled		:1;
 		uint32_t	msix_enabled		:1;
 		uint32_t	disable_serdes		:1;
+		uint32_t	gpsc_supported		:1;
 	} flags;
 
 	atomic_t	loop_state;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 32ebeec..e4dd12f 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -45,7 +45,6 @@
 extern int qla2x00_abort_isp(scsi_qla_host_t *);
 
 extern void qla2x00_update_fcport(scsi_qla_host_t *, fc_port_t *);
-extern void qla2x00_reg_remote_port(scsi_qla_host_t *, fc_port_t *);
 
 extern void qla2x00_alloc_fw_dump(scsi_qla_host_t *);
 extern void qla2x00_try_to_stop_firmware(scsi_qla_host_t *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 97fbc62..ec5b2dd 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -127,8 +127,8 @@
 		    ha->host_no, routine, ms_pkt->entry_status));
 	} else {
 		if (IS_QLA24XX(ha) || IS_QLA54XX(ha))
-			comp_status =
-			    ((struct ct_entry_24xx *)ms_pkt)->comp_status;
+			comp_status = le16_to_cpu(
+			    ((struct ct_entry_24xx *)ms_pkt)->comp_status);
 		else
 			comp_status = le16_to_cpu(ms_pkt->status);
 		switch (comp_status) {
@@ -143,6 +143,7 @@
 				DEBUG2_3(qla2x00_dump_buffer(
 				    (uint8_t *)&ct_rsp->header,
 				    sizeof(struct ct_rsp_hdr)));
+				rval = QLA_INVALID_COMMAND;
 			} else
 				rval = QLA_SUCCESS;
 			break;
@@ -1683,7 +1684,7 @@
 		memset(list[i].fabric_port_name, 0, WWN_SIZE);
 
 		/* Prepare common MS IOCB */
-		ms_pkt = qla2x00_prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
+		ms_pkt = ha->isp_ops.prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
 		    GFPN_ID_RSP_SIZE);
 
 		/* Prepare CT request */
@@ -1784,6 +1785,8 @@
 
 	if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
 		return QLA_FUNCTION_FAILED;
+	if (!ha->flags.gpsc_supported)
+		return QLA_FUNCTION_FAILED;
 
 	rval = qla2x00_mgmt_svr_login(ha);
 	if (rval)
@@ -1813,8 +1816,19 @@
 			/*EMPTY*/
 			DEBUG2_3(printk("scsi(%ld): GPSC issue IOCB "
 			    "failed (%d).\n", ha->host_no, rval));
-		} else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
-		    "GPSC") != QLA_SUCCESS) {
+		} else if ((rval = qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
+		    "GPSC")) != QLA_SUCCESS) {
+			/* FM command unsupported? */
+			if (rval == QLA_INVALID_COMMAND &&
+			    ct_rsp->header.reason_code ==
+			    CT_REASON_INVALID_COMMAND_CODE) {
+				DEBUG2(printk("scsi(%ld): GPSC command "
+				    "unsupported, disabling query...\n",
+				    ha->host_no));
+				ha->flags.gpsc_supported = 0;
+				rval = QLA_FUNCTION_FAILED;
+				break;
+			}
 			rval = QLA_FUNCTION_FAILED;
 		} else {
 			/* Save portname */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index a823f0b..b3dac26 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2103,40 +2103,7 @@
 	}
 }
 
-/*
- * qla2x00_update_fcport
- *	Updates device on list.
- *
- * Input:
- *	ha = adapter block pointer.
- *	fcport = port structure pointer.
- *
- * Return:
- *	0  - Success
- *  BIT_0 - error
- *
- * Context:
- *	Kernel context.
- */
-void
-qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
-{
-	fcport->ha = ha;
-	fcport->login_retry = 0;
-	fcport->port_login_retry_count = ha->port_down_retry_count *
-	    PORT_RETRY_TIME;
-	atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
-	    PORT_RETRY_TIME);
-	fcport->flags &= ~FCF_LOGIN_NEEDED;
-
-	qla2x00_iidma_fcport(ha, fcport);
-
-	atomic_set(&fcport->state, FCS_ONLINE);
-
-	qla2x00_reg_remote_port(ha, fcport);
-}
-
-void
+static void
 qla2x00_reg_remote_port(scsi_qla_host_t *ha, fc_port_t *fcport)
 {
 	struct fc_rport_identifiers rport_ids;
@@ -2179,6 +2146,39 @@
 }
 
 /*
+ * qla2x00_update_fcport
+ *	Updates device on list.
+ *
+ * Input:
+ *	ha = adapter block pointer.
+ *	fcport = port structure pointer.
+ *
+ * Return:
+ *	0  - Success
+ *  BIT_0 - error
+ *
+ * Context:
+ *	Kernel context.
+ */
+void
+qla2x00_update_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+	fcport->ha = ha;
+	fcport->login_retry = 0;
+	fcport->port_login_retry_count = ha->port_down_retry_count *
+	    PORT_RETRY_TIME;
+	atomic_set(&fcport->port_down_timer, ha->port_down_retry_count *
+	    PORT_RETRY_TIME);
+	fcport->flags &= ~FCF_LOGIN_NEEDED;
+
+	qla2x00_iidma_fcport(ha, fcport);
+
+	atomic_set(&fcport->state, FCS_ONLINE);
+
+	qla2x00_reg_remote_port(ha, fcport);
+}
+
+/*
  * qla2x00_configure_fabric
  *      Setup SNS devices with loop ID's.
  *
@@ -3476,9 +3476,11 @@
 
 	/* Set host adapter parameters. */
 	ha->flags.disable_risc_code_load = 0;
-	ha->flags.enable_lip_reset = 1;
-	ha->flags.enable_lip_full_login = 1;
-	ha->flags.enable_target_reset = 1;
+	ha->flags.enable_lip_reset = 0;
+	ha->flags.enable_lip_full_login =
+	    le32_to_cpu(nv->host_p) & BIT_10 ? 1: 0;
+	ha->flags.enable_target_reset =
+	    le32_to_cpu(nv->host_p) & BIT_11 ? 1: 0;
 	ha->flags.enable_led_scheme = 0;
 	ha->flags.disable_serdes = le32_to_cpu(nv->host_p) & BIT_5 ? 1: 0;
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index d3b6df4..39fd17b 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -134,11 +134,11 @@
 		if (stat & HSR_RISC_PAUSED) {
 			hccr = RD_REG_WORD(&reg->hccr);
 			if (hccr & (BIT_15 | BIT_13 | BIT_11 | BIT_8))
-				qla_printk(KERN_INFO, ha,
-				    "Parity error -- HCCR=%x.\n", hccr);
+				qla_printk(KERN_INFO, ha, "Parity error -- "
+				    "HCCR=%x, Dumping firmware!\n", hccr);
 			else
-				qla_printk(KERN_INFO, ha,
-				    "RISC paused -- HCCR=%x.\n", hccr);
+				qla_printk(KERN_INFO, ha, "RISC paused -- "
+				    "HCCR=%x, Dumping firmware!\n", hccr);
 
 			/*
 			 * Issue a "HARD" reset in order for the RISC
@@ -147,6 +147,8 @@
 			 */
 			WRT_REG_WORD(&reg->hccr, HCCR_RESET_RISC);
 			RD_REG_WORD(&reg->hccr);
+
+			ha->isp_ops.fw_dump(ha, 1);
 			set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
 			break;
 		} else if ((stat & HSR_RISC_INT) == 0)
@@ -475,6 +477,8 @@
 			set_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
 		}
 		set_bit(REGISTER_FC4_NEEDED, &ha->dpc_flags);
+
+		ha->flags.gpsc_supported = 1;
 		break;
 
 	case MBA_CHG_IN_CONNECTION:	/* Change in connection mode */
@@ -1440,8 +1444,7 @@
 
 			qla_printk(KERN_INFO, ha, "RISC paused -- HCCR=%x, "
 			    "Dumping firmware!\n", hccr);
-			qla24xx_fw_dump(ha, 1);
-
+			ha->isp_ops.fw_dump(ha, 1);
 			set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
 			break;
 		} else if ((stat & HSRX_RISC_INT) == 0)
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4cde76c..077e578 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -1339,9 +1339,9 @@
 
 	if (IS_QLA24XX(ha) || IS_QLA54XX(ha)) {
 		mcp->mb[0] = MBC_LIP_FULL_LOGIN;
-		mcp->mb[1] = BIT_0;
-		mcp->mb[2] = 0xff;
-		mcp->mb[3] = 0;
+		mcp->mb[1] = BIT_6;
+		mcp->mb[2] = 0;
+		mcp->mb[3] = ha->loop_reset_delay;
 		mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
 	} else {
 		mcp->mb[0] = MBC_LIP_RESET;
@@ -1823,8 +1823,8 @@
 	    ha->host_no));
 
 	mcp->mb[0] = MBC_LIP_FULL_LOGIN;
-	mcp->mb[1] = 0;
-	mcp->mb[2] = 0xff;
+	mcp->mb[1] = IS_QLA24XX(ha) || IS_QLA54XX(ha) ? BIT_3: 0;
+	mcp->mb[2] = 0;
 	mcp->mb[3] = 0;
 	mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
@@ -2486,7 +2486,7 @@
 		mcp->mb[4] = LSW(MSD(eft_dma));
 		mcp->mb[5] = MSW(MSD(eft_dma));
 		mcp->mb[6] = buffers;
-		mcp->mb[7] = buffers;
+		mcp->mb[7] = 0;
 		mcp->out_mb |= MBX_7|MBX_6|MBX_5|MBX_4|MBX_3|MBX_2;
 	}
 	mcp->tov = 30;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index d03523d..d6445ae 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1037,48 +1037,49 @@
 static int
 qla2x00_loop_reset(scsi_qla_host_t *ha)
 {
-	int status = QLA_SUCCESS;
+	int ret;
 	struct fc_port *fcport;
 
-	if (ha->flags.enable_lip_reset) {
-		status = qla2x00_lip_reset(ha);
+	if (ha->flags.enable_lip_full_login) {
+		ret = qla2x00_full_login_lip(ha);
+		if (ret != QLA_SUCCESS) {
+			DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+			    "full_login_lip=%d.\n", __func__, ha->host_no,
+			    ret));
+		}
+		atomic_set(&ha->loop_state, LOOP_DOWN);
+		atomic_set(&ha->loop_down_timer, LOOP_DOWN_TIME);
+		qla2x00_mark_all_devices_lost(ha, 0);
+		qla2x00_wait_for_loop_ready(ha);
 	}
 
-	if (status == QLA_SUCCESS && ha->flags.enable_target_reset) {
+	if (ha->flags.enable_lip_reset) {
+		ret = qla2x00_lip_reset(ha);
+		if (ret != QLA_SUCCESS) {
+			DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+			    "lip_reset=%d.\n", __func__, ha->host_no, ret));
+		}
+		qla2x00_wait_for_loop_ready(ha);
+	}
+
+	if (ha->flags.enable_target_reset) {
 		list_for_each_entry(fcport, &ha->fcports, list) {
 			if (fcport->port_type != FCT_TARGET)
 				continue;
 
-			status = qla2x00_device_reset(ha, fcport);
-			if (status != QLA_SUCCESS)
-				break;
+			ret = qla2x00_device_reset(ha, fcport);
+			if (ret != QLA_SUCCESS) {
+				DEBUG2_3(printk("%s(%ld): bus_reset failed: "
+				    "target_reset=%d d_id=%x.\n", __func__,
+				    ha->host_no, ret, fcport->d_id.b24));
+			}
 		}
 	}
 
-	if (status == QLA_SUCCESS &&
-		((!ha->flags.enable_target_reset &&
-		  !ha->flags.enable_lip_reset) ||
-		ha->flags.enable_lip_full_login)) {
-
-		status = qla2x00_full_login_lip(ha);
-	}
-
 	/* Issue marker command only when we are going to start the I/O */
 	ha->marker_needed = 1;
 
-	if (status) {
-		/* Empty */
-		DEBUG2_3(printk("%s(%ld): **** FAILED ****\n",
-				__func__,
-				ha->host_no));
-	} else {
-		/* Empty */
-		DEBUG3(printk("%s(%ld): exiting normally.\n",
-				__func__,
-				ha->host_no));
-	}
-
-	return(status);
+	return QLA_SUCCESS;
 }
 
 /*
@@ -1413,7 +1414,9 @@
 
 	sht = &qla2x00_driver_template;
 	if (pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2422 ||
-	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432)
+	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP2432 ||
+	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5422 ||
+	    pdev->device == PCI_DEVICE_ID_QLOGIC_ISP5432)
 		sht = &qla24xx_driver_template;
 	host = scsi_host_alloc(sht, sizeof(scsi_qla_host_t));
 	if (host == NULL) {
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 1fa0bce..459e0d6 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.01.07-k3"
+#define QLA2XXX_VERSION      "8.01.07-k4"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	1
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 14e635a..b83d03c 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -133,12 +133,10 @@
 /**
  * scsi_complete_async_scans - Wait for asynchronous scans to complete
  *
- * Asynchronous scans add themselves to the scanning_hosts list.  Once
- * that list is empty, we know that the scans are complete.  Rather than
- * waking up periodically to check the state of the list, we pretend to be
- * a scanning task by adding ourselves at the end of the list and going to
- * sleep.  When the task before us wakes us up, we take ourselves off the
- * list and return.
+ * When this function returns, any host which started scanning before
+ * this function was called will have finished its scan.  Hosts which
+ * started scanning after this function was called may or may not have
+ * finished.
  */
 int scsi_complete_async_scans(void)
 {
@@ -171,6 +169,11 @@
 
 	spin_lock(&async_scan_lock);
 	list_del(&data->list);
+	if (!list_empty(&scanning_hosts)) {
+		struct async_scan_data *next = list_entry(scanning_hosts.next,
+				struct async_scan_data, list);
+		complete(&next->prev_finished);
+	}
  done:
 	spin_unlock(&async_scan_lock);
 
@@ -739,6 +742,14 @@
 		sdev->no_uld_attach = 1;
 
 	switch (sdev->type = (inq_result[0] & 0x1f)) {
+	case TYPE_RBC:
+		/* RBC devices can return SCSI-3 compliance and yet
+		 * still not support REPORT LUNS, so make them act as
+		 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+		 * specifically set */
+		if ((*bflags & BLIST_REPORTLUN2) == 0)
+			*bflags |= BLIST_NOREPORTLUN;
+		/* fall through */
 	case TYPE_TAPE:
 	case TYPE_DISK:
 	case TYPE_PRINTER:
@@ -749,11 +760,17 @@
 	case TYPE_ENCLOSURE:
 	case TYPE_COMM:
 	case TYPE_RAID:
-	case TYPE_RBC:
 		sdev->writeable = 1;
 		break;
-	case TYPE_WORM:
 	case TYPE_ROM:
+		/* MMC devices can return SCSI-3 compliance and yet
+		 * still not support REPORT LUNS, so make them act as
+		 * BLIST_NOREPORTLUN unless BLIST_REPORTLUN2 is
+		 * specifically set */
+		if ((*bflags & BLIST_REPORTLUN2) == 0)
+			*bflags |= BLIST_NOREPORTLUN;
+		/* fall through */
+	case TYPE_WORM:
 		sdev->writeable = 0;
 		break;
 	default:
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 9c22f13..ce0d14a 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -1416,7 +1416,7 @@
 {
 	int err;
 
-	printk(KERN_INFO "Loading iSCSI transport class v%s.",
+	printk(KERN_INFO "Loading iSCSI transport class v%s.\n",
 		ISCSI_TRANSPORT_VERSION);
 
 	err = class_register(&iscsi_transport_class);
diff --git a/drivers/scsi/scsi_transport_spi.c b/drivers/scsi/scsi_transport_spi.c
index 3fded48..014d7fe 100644
--- a/drivers/scsi/scsi_transport_spi.c
+++ b/drivers/scsi/scsi_transport_spi.c
@@ -122,7 +122,7 @@
 			if (!sshdr)
 				sshdr = &sshdr_tmp;
 
-			if (scsi_normalize_sense(sense, sizeof(*sense),
+			if (scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE,
 						 sshdr)
 			    && sshdr->sense_key == UNIT_ATTENTION)
 				continue;
diff --git a/drivers/scsi/seagate.c b/drivers/scsi/seagate.c
index 5ffec27..ff62e97 100644
--- a/drivers/scsi/seagate.c
+++ b/drivers/scsi/seagate.c
@@ -114,6 +114,7 @@
 #define DPRINTK( when, msg... ) do { if ( (DEBUG & (when)) == (when) ) printk( msg ); } while (0)
 #else
 #define DPRINTK( when, msg... ) do { } while (0)
+#define DEBUG 0
 #endif
 #define DANY( msg... ) DPRINTK( 0xffff, msg );
 
@@ -523,7 +524,7 @@
 #ifdef ARBITRATE
 		" ARBITRATE"
 #endif
-#ifdef DEBUG
+#if DEBUG
 		" DEBUG"
 #endif
 #ifdef FAST
@@ -733,7 +734,7 @@
 	unsigned char *data = NULL;
 	struct scatterlist *buffer = NULL;
 	int clock, temp, nobuffs = 0, done = 0, len = 0;
-#ifdef DEBUG
+#if DEBUG
 	int transfered = 0, phase = 0, newphase;
 #endif
 	register unsigned char status_read;
diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c
index fae6e95..89e9b36 100644
--- a/drivers/scsi/sr.c
+++ b/drivers/scsi/sr.c
@@ -468,7 +468,7 @@
 	}
 
 	ret = cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
-	if (ret != ENOSYS)
+	if (ret != -ENOSYS)
 		return ret;
 
 	/*
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig
index f8324d8..3e66b2a 100644
--- a/drivers/usb/core/Kconfig
+++ b/drivers/usb/core/Kconfig
@@ -72,22 +72,6 @@
 
 	  If you are unsure about this, say N here.
 
-config USB_MULTITHREAD_PROBE
-	bool "USB Multi-threaded probe (EXPERIMENTAL)"
-	depends on USB && EXPERIMENTAL
-	default n
-	help
-	  Say Y here if you want the USB core to spawn a new thread for
-	  every USB device that is probed.  This can cause a small speedup
-	  in boot times on systems with a lot of different USB devices.
-
-	  This option should be safe to enable, but if any odd probing
-	  problems are found, please disable it, or dynamically turn it
-	  off in the /sys/module/usbcore/parameters/multithread_probe
-	  file
-
-	  When in doubt, say N.
-
 config USB_OTG
 	bool
 	depends on USB && EXPERIMENTAL
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2651c2e..1988224 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -88,14 +88,7 @@
 static struct task_struct *khubd_task;
 
 /* multithreaded probe logic */
-static int multithread_probe =
-#ifdef CONFIG_USB_MULTITHREAD_PROBE
-	1;
-#else
-	0;
-#endif
-module_param(multithread_probe, bool, S_IRUGO);
-MODULE_PARM_DESC(multithread_probe, "Run each USB device probe in a new thread");
+static int multithread_probe = 0;
 
 /* cycle leds on hubs that aren't blinking for attention */
 static int blinkenlights = 0;
diff --git a/drivers/usb/host/ohci-ep93xx.c b/drivers/usb/host/ohci-ep93xx.c
index 43ae696..3348b07 100644
--- a/drivers/usb/host/ohci-ep93xx.c
+++ b/drivers/usb/host/ohci-ep93xx.c
@@ -169,7 +169,7 @@
 static int ohci_hcd_ep93xx_drv_suspend(struct platform_device *pdev, pm_message_t state)
 {
 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct ochi_hcd *ohci = hcd_to_ohci(hcd);
+	struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 
 	if (time_before(jiffies, ohci->next_statechange))
 		msleep(5);
diff --git a/drivers/usb/input/Kconfig b/drivers/usb/input/Kconfig
index 258a5d0..c7d8875 100644
--- a/drivers/usb/input/Kconfig
+++ b/drivers/usb/input/Kconfig
@@ -7,7 +7,7 @@
 config USB_HID
 	tristate "USB Human Interface Device (full HID) support"
 	default y
-	depends on USB
+	depends on USB && INPUT
 	select HID
 	---help---
 	  Say Y here if you want full HID support to connect USB keyboards,
diff --git a/drivers/usb/input/hid-core.c b/drivers/usb/input/hid-core.c
index 89fa688..ea3636d 100644
--- a/drivers/usb/input/hid-core.c
+++ b/drivers/usb/input/hid-core.c
@@ -106,18 +106,18 @@
 
 	if (test_bit(HID_CLEAR_HALT, &usbhid->iofl)) {
 		dev_dbg(&usbhid->intf->dev, "clear halt\n");
-		rc = usb_clear_halt(to_usb_device(hid->dev), usbhid->urbin->pipe);
+		rc = usb_clear_halt(hid_to_usb_dev(hid), usbhid->urbin->pipe);
 		clear_bit(HID_CLEAR_HALT, &usbhid->iofl);
 		hid_start_in(hid);
 	}
 
 	else if (test_bit(HID_RESET_PENDING, &usbhid->iofl)) {
 		dev_dbg(&usbhid->intf->dev, "resetting device\n");
-		rc = rc_lock = usb_lock_device_for_reset(to_usb_device(hid->dev), usbhid->intf);
+		rc = rc_lock = usb_lock_device_for_reset(hid_to_usb_dev(hid), usbhid->intf);
 		if (rc_lock >= 0) {
-			rc = usb_reset_composite_device(to_usb_device(hid->dev), usbhid->intf);
+			rc = usb_reset_composite_device(hid_to_usb_dev(hid), usbhid->intf);
 			if (rc_lock)
-				usb_unlock_device(to_usb_device(hid->dev));
+				usb_unlock_device(hid_to_usb_dev(hid));
 		}
 		clear_bit(HID_RESET_PENDING, &usbhid->iofl);
 	}
@@ -129,8 +129,8 @@
 		break;
 	default:
 		err("can't reset device, %s-%s/input%d, status %d",
-				to_usb_device(hid->dev)->bus->bus_name,
-				to_usb_device(hid->dev)->devpath,
+				hid_to_usb_dev(hid)->bus->bus_name,
+				hid_to_usb_dev(hid)->devpath,
 				usbhid->ifnum, rc);
 		/* FALLTHROUGH */
 	case -EHOSTUNREACH:
@@ -217,8 +217,8 @@
 		clear_bit(HID_IN_RUNNING, &usbhid->iofl);
 		if (status != -EPERM) {
 			err("can't resubmit intr, %s-%s/input%d, status %d",
-					to_usb_device(hid->dev)->bus->bus_name,
-					to_usb_device(hid->dev)->devpath,
+					hid_to_usb_dev(hid)->bus->bus_name,
+					hid_to_usb_dev(hid)->devpath,
 					usbhid->ifnum, status);
 			hid_io_error(hid);
 		}
@@ -251,7 +251,7 @@
 
 	hid_output_report(report, usbhid->outbuf);
 	usbhid->urbout->transfer_buffer_length = ((report->size - 1) >> 3) + 1 + (report->id > 0);
-	usbhid->urbout->dev = to_usb_device(hid->dev);
+	usbhid->urbout->dev = hid_to_usb_dev(hid);
 
 	dbg("submitting out urb");
 
@@ -276,13 +276,13 @@
 	len = ((report->size - 1) >> 3) + 1 + (report->id > 0);
 	if (dir == USB_DIR_OUT) {
 		hid_output_report(report, usbhid->ctrlbuf);
-		usbhid->urbctrl->pipe = usb_sndctrlpipe(to_usb_device(hid->dev), 0);
+		usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
 		usbhid->urbctrl->transfer_buffer_length = len;
 	} else {
 		int maxpacket, padlen;
 
-		usbhid->urbctrl->pipe = usb_rcvctrlpipe(to_usb_device(hid->dev), 0);
-		maxpacket = usb_maxpacket(to_usb_device(hid->dev), usbhid->urbctrl->pipe, 0);
+		usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
+		maxpacket = usb_maxpacket(hid_to_usb_dev(hid), usbhid->urbctrl->pipe, 0);
 		if (maxpacket > 0) {
 			padlen = (len + maxpacket - 1) / maxpacket;
 			padlen *= maxpacket;
@@ -292,7 +292,7 @@
 			padlen = 0;
 		usbhid->urbctrl->transfer_buffer_length = padlen;
 	}
-	usbhid->urbctrl->dev = to_usb_device(hid->dev);
+	usbhid->urbctrl->dev = hid_to_usb_dev(hid);
 
 	usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
 	usbhid->cr->bRequest = (dir == USB_DIR_OUT) ? HID_REQ_SET_REPORT : HID_REQ_GET_REPORT;
@@ -582,6 +582,8 @@
 }
 
 #define USB_VENDOR_ID_GTCO		0x078c
+#define USB_VENDOR_ID_GTCO_IPANEL_1	0x08ca
+#define USB_VENDOR_ID_GTCO_IPANEL_2     0x5543
 #define USB_DEVICE_ID_GTCO_90		0x0090
 #define USB_DEVICE_ID_GTCO_100		0x0100
 #define USB_DEVICE_ID_GTCO_101		0x0101
@@ -627,6 +629,9 @@
 #define USB_DEVICE_ID_GTCO_1004		0x1004
 #define USB_DEVICE_ID_GTCO_1005		0x1005
 #define USB_DEVICE_ID_GTCO_1006		0x1006
+#define USB_DEVICE_ID_GTCO_10		0x0010
+#define USB_DEVICE_ID_GTCO_8		0x0008
+#define USB_DEVICE_ID_GTCO_d            0x000d
 
 #define USB_VENDOR_ID_WACOM		0x056a
 
@@ -791,6 +796,9 @@
 #define USB_VENDOR_ID_LOGITECH		0x046d
 #define USB_DEVICE_ID_LOGITECH_USB_RECEIVER	0xc101
 
+#define USB_VENDOR_ID_IMATION		0x0718
+#define USB_DEVICE_ID_DISC_STAKKA	0xd000
+
 /*
  * Alphabetically sorted blacklist by quirk type.
  */
@@ -875,6 +883,10 @@
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1004, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1005, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_GTCO, USB_DEVICE_ID_GTCO_1006, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO_IPANEL_1, USB_DEVICE_ID_GTCO_10, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_8, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_GTCO_IPANEL_2, USB_DEVICE_ID_GTCO_d, HID_QUIRK_IGNORE },
+	{ USB_VENDOR_ID_IMATION, USB_DEVICE_ID_DISC_STAKKA, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_KBGEAR, USB_DEVICE_ID_KBGEAR_JAMSTUDIO, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_CASSY, HID_QUIRK_IGNORE },
 	{ USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POCKETCASSY, HID_QUIRK_IGNORE },
@@ -951,7 +963,7 @@
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
-	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
+	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
 	{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
@@ -1187,7 +1199,7 @@
 
 	hid->version = le16_to_cpu(hdesc->bcdHID);
 	hid->country = hdesc->bCountryCode;
-	hid->dev = &dev->dev;
+	hid->dev = &intf->dev;
 	usbhid->intf = intf;
 	usbhid->ifnum = interface->desc.bInterfaceNumber;
 
@@ -1282,7 +1294,7 @@
 	usb_free_urb(usbhid->urbctrl);
 	usb_free_urb(usbhid->urbout);
 
-	hid_free_buffers(to_usb_device(hid->dev), hid);
+	hid_free_buffers(hid_to_usb_dev(hid), hid);
 	hid_free_device(hid);
 }
 
diff --git a/drivers/usb/input/hid-ff.c b/drivers/usb/input/hid-ff.c
index f8f660e..59ed65e 100644
--- a/drivers/usb/input/hid-ff.c
+++ b/drivers/usb/input/hid-ff.c
@@ -33,6 +33,7 @@
 #include <linux/usb.h>
 
 #include <linux/hid.h>
+#include "usbhid.h"
 
 /*
  * This table contains pointers to initializers. To add support for new
@@ -70,8 +71,8 @@
 int hid_ff_init(struct hid_device* hid)
 {
 	struct hid_ff_initializer *init;
-	int vendor = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idVendor);
-	int product = le16_to_cpu(to_usb_device(hid->dev)->descriptor.idProduct);
+	int vendor = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idVendor);
+	int product = le16_to_cpu(hid_to_usb_dev(hid)->descriptor.idProduct);
 
 	for (init = inits; init->idVendor; init++)
 		if (init->idVendor == vendor && init->idProduct == product)
diff --git a/drivers/usb/input/hiddev.c b/drivers/usb/input/hiddev.c
index 114d6c9..a8b3d66 100644
--- a/drivers/usb/input/hiddev.c
+++ b/drivers/usb/input/hiddev.c
@@ -384,7 +384,7 @@
 	struct hiddev_list *list = file->private_data;
 	struct hiddev *hiddev = list->hiddev;
 	struct hid_device *hid = hiddev->hid;
-	struct usb_device *dev = to_usb_device(hid->dev);
+	struct usb_device *dev = hid_to_usb_dev(hid);
 	struct hiddev_collection_info cinfo;
 	struct hiddev_report_info rinfo;
 	struct hiddev_field_info finfo;
diff --git a/drivers/usb/input/usbhid.h b/drivers/usb/input/usbhid.h
index 830107e..0023f96 100644
--- a/drivers/usb/input/usbhid.h
+++ b/drivers/usb/input/usbhid.h
@@ -80,5 +80,8 @@
 
 };
 
+#define	hid_to_usb_dev(hid_dev) \
+	container_of(hid_dev->dev->parent, struct usb_device, dev)
+
 #endif
 
diff --git a/drivers/usb/input/usbtouchscreen.c b/drivers/usb/input/usbtouchscreen.c
index 7f3c57d..86e37a2 100644
--- a/drivers/usb/input/usbtouchscreen.c
+++ b/drivers/usb/input/usbtouchscreen.c
@@ -66,7 +66,7 @@
 
 	void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
 	int  (*get_pkt_len) (unsigned char *pkt, int len);
-	int  (*read_data)   (unsigned char *pkt, int *x, int *y, int *touch, int *press);
+	int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
 	int  (*init)        (struct usbtouch_usb *usbtouch);
 };
 
@@ -85,6 +85,9 @@
 	struct usbtouch_device_info *type;
 	char name[128];
 	char phys[64];
+
+	int x, y;
+	int touch, press;
 };
 
 
@@ -161,14 +164,14 @@
 #define EGALAX_PKT_TYPE_REPT		0x80
 #define EGALAX_PKT_TYPE_DIAG		0x0A
 
-static int egalax_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
 		return 0;
 
-	*x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
-	*y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
-	*touch = pkt[0] & 0x01;
+	dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+	dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+	dev->touch = pkt[0] & 0x01;
 
 	return 1;
 }
@@ -195,11 +198,11 @@
  * PanJit Part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_PANJIT
-static int panjit_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = ((pkt[2] & 0x0F) << 8) | pkt[1];
-	*y = ((pkt[4] & 0x0F) << 8) | pkt[3];
-	*touch = pkt[0] & 0x01;
+	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
 
 	return 1;
 }
@@ -215,11 +218,11 @@
 #define MTOUCHUSB_RESET                 7
 #define MTOUCHUSB_REQ_CTRLLR_ID         10
 
-static int mtouch_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = (pkt[8] << 8) | pkt[7];
-	*y = (pkt[10] << 8) | pkt[9];
-	*touch = (pkt[2] & 0x40) ? 1 : 0;
+	dev->x = (pkt[8] << 8) | pkt[7];
+	dev->y = (pkt[10] << 8) | pkt[9];
+	dev->touch = (pkt[2] & 0x40) ? 1 : 0;
 
 	return 1;
 }
@@ -260,14 +263,32 @@
  * ITM Part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_ITM
-static int itm_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
-	*y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
-	*press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
-	*touch = ~pkt[7] & 0x20;
+	int touch;
+	/*
+	 * ITM devices report invalid x/y data if not touched.
+	 * if the screen was touched before but is not touched any more
+	 * report touch as 0 with the last valid x/y data once. then stop
+	 * reporting data until touched again.
+	 */
+	dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
 
-	return *touch;
+	touch = ~pkt[7] & 0x20;
+	if (!touch) {
+		if (dev->touch) {
+			dev->touch = 0;
+			return 1;
+		}
+
+		return 0;
+	}
+
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	dev->touch = touch;
+
+	return 1;
 }
 #endif
 
@@ -276,7 +297,7 @@
  * eTurboTouch part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_ETURBO
-static int eturbo_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	unsigned int shift;
 
@@ -285,9 +306,9 @@
 		return 0;
 
 	shift = (6 - (pkt[0] & 0x03));
-	*x = ((pkt[3] << 7) | pkt[4]) >> shift;
-	*y = ((pkt[1] << 7) | pkt[2]) >> shift;
-	*touch = (pkt[0] & 0x10) ? 1 : 0;
+	dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+	dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+	dev->touch = (pkt[0] & 0x10) ? 1 : 0;
 
 	return 1;
 }
@@ -307,14 +328,14 @@
  * Gunze part
  */
 #ifdef CONFIG_USB_TOUCHSCREEN_GUNZE
-static int gunze_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
 		return 0;
 
-	*x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
-	*y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
-	*touch = pkt[0] & 0x20;
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->touch = pkt[0] & 0x20;
 
 	return 1;
 }
@@ -383,11 +404,11 @@
 }
 
 
-static int dmc_tsc10_read_data(unsigned char *pkt, int *x, int *y, int *touch, int *press)
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
-	*x = ((pkt[2] & 0x03) << 8) | pkt[1];
-	*y = ((pkt[4] & 0x03) << 8) | pkt[3];
-	*touch = pkt[0] & 0x01;
+	dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
 
 	return 1;
 }
@@ -492,23 +513,22 @@
 static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
                                  unsigned char *pkt, int len)
 {
-	int x, y, touch, press;
 	struct usbtouch_device_info *type = usbtouch->type;
 
-	if (!type->read_data(pkt, &x, &y, &touch, &press))
+	if (!type->read_data(usbtouch, pkt))
 			return;
 
-	input_report_key(usbtouch->input, BTN_TOUCH, touch);
+	input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
 
 	if (swap_xy) {
-		input_report_abs(usbtouch->input, ABS_X, y);
-		input_report_abs(usbtouch->input, ABS_Y, x);
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
 	} else {
-		input_report_abs(usbtouch->input, ABS_X, x);
-		input_report_abs(usbtouch->input, ABS_Y, y);
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
 	}
 	if (type->max_press)
-		input_report_abs(usbtouch->input, ABS_PRESSURE, press);
+		input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
 	input_sync(usbtouch->input);
 }
 
diff --git a/drivers/usb/net/asix.c b/drivers/usb/net/asix.c
index f538013..896449f 100644
--- a/drivers/usb/net/asix.c
+++ b/drivers/usb/net/asix.c
@@ -898,7 +898,7 @@
 
 static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
 {
-	int ret;
+	int ret, embd_phy;
 	void *buf;
 	u16 rx_ctl;
 	struct asix_data *data = (struct asix_data *)&dev->data;
@@ -919,13 +919,15 @@
 			AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5)) < 0)
 		goto out2;
 
+	/* 0x10 is the phy id of the embedded 10/100 ethernet phy */
+	embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0);
 	if ((ret = asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT,
-				1, 0, 0, buf)) < 0) {
+				embd_phy, 0, 0, buf)) < 0) {
 		dbg("Select PHY #1 failed: %d", ret);
 		goto out2;
 	}
 
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD)) < 0)
+	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL)) < 0)
 		goto out2;
 
 	msleep(150);
@@ -933,8 +935,14 @@
 		goto out2;
 
 	msleep(150);
-	if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL | AX_SWRESET_PRL)) < 0)
-		goto out2;
+	if (embd_phy) {
+		if ((ret = asix_sw_reset(dev, AX_SWRESET_IPRL)) < 0)
+			goto out2;
+	}
+	else {
+		if ((ret = asix_sw_reset(dev, AX_SWRESET_PRTE)) < 0)
+			goto out2;
+	}
 
 	msleep(150);
 	rx_ctl = asix_read_rx_ctl(dev);
diff --git a/drivers/usb/net/rndis_host.c b/drivers/usb/net/rndis_host.c
index ea5f44d..a322a16 100644
--- a/drivers/usb/net/rndis_host.c
+++ b/drivers/usb/net/rndis_host.c
@@ -379,6 +379,7 @@
 {
 	int			retval;
 	struct net_device	*net = dev->net;
+	struct cdc_state	*info = (void *) &dev->data;
 	union {
 		void			*buf;
 		struct rndis_msg_hdr	*header;
@@ -397,7 +398,7 @@
 		return -ENOMEM;
 	retval = usbnet_generic_cdc_bind(dev, intf);
 	if (retval < 0)
-		goto done;
+		goto fail;
 
 	net->hard_header_len += sizeof (struct rndis_data_hdr);
 
@@ -412,10 +413,7 @@
 	if (unlikely(retval < 0)) {
 		/* it might not even be an RNDIS device!! */
 		dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
-fail:
-		usb_driver_release_interface(driver_of(intf),
-			((struct cdc_state *)&(dev->data))->data);
-		goto done;
+		goto fail_and_release;
 	}
 	dev->hard_mtu = le32_to_cpu(u.init_c->max_transfer_size);
 	/* REVISIT:  peripheral "alignment" request is ignored ... */
@@ -431,7 +429,7 @@
 	retval = rndis_command(dev, u.header);
 	if (unlikely(retval < 0)) {
 		dev_err(&intf->dev, "rndis get ethaddr, %d\n", retval);
-		goto fail;
+		goto fail_and_release;
 	}
 	tmp = le32_to_cpu(u.get_c->offset);
 	if (unlikely((tmp + 8) > (1024 - ETH_ALEN)
@@ -439,7 +437,7 @@
 		dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
 			tmp, le32_to_cpu(u.get_c->len));
 		retval = -EDOM;
-		goto fail;
+		goto fail_and_release;
 	}
 	memcpy(net->dev_addr, tmp + (char *)&u.get_c->request_id, ETH_ALEN);
 
@@ -455,11 +453,18 @@
 	retval = rndis_command(dev, u.header);
 	if (unlikely(retval < 0)) {
 		dev_err(&intf->dev, "rndis set packet filter, %d\n", retval);
-		goto fail;
+		goto fail_and_release;
 	}
 
 	retval = 0;
-done:
+
+	kfree(u.buf);
+	return retval;
+
+fail_and_release:
+	usb_set_intfdata(info->data, NULL);
+	usb_driver_release_interface(driver_of(intf), info->data);
+fail:
 	kfree(u.buf);
 	return retval;
 }
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 5ca04e8..0fed43a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -78,6 +78,7 @@
 #define OPTION_PRODUCT_FUSION2          0x6300
 #define OPTION_PRODUCT_COBRA            0x6500
 #define OPTION_PRODUCT_COBRA2           0x6600
+#define OPTION_PRODUCT_GTMAX36          0x6701
 #define HUAWEI_PRODUCT_E600             0x1001
 #define HUAWEI_PRODUCT_E220             0x1003
 #define AUDIOVOX_PRODUCT_AIRCARD        0x0112
@@ -90,6 +91,7 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
@@ -104,6 +106,7 @@
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUSION2) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COBRA2) },
+	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTMAX36) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
 	{ USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220) },
 	{ USB_DEVICE(AUDIOVOX_VENDOR_ID, AUDIOVOX_PRODUCT_AIRCARD) },
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index cddef3e..b49f2a7 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -197,6 +197,13 @@
 		US_SC_DEVICE, US_PR_DEVICE, NULL,
 		US_FL_MAX_SECTORS_64 ),
 
+/* Reported by Manuel Osdoba <manuel.osdoba@tu-ilmenau.de> */
+UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452,
+		"Nokia",
+		"Nokia 6233",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_MAX_SECTORS_64 ),
+
 /* Reported by Alex Corcoles <alex@corcoles.net> */
 UNUSUAL_DEV(  0x0421, 0x0495, 0x0370, 0x0370,
 		"Nokia",
@@ -254,6 +261,18 @@
 		US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0),
 #endif
 
+/*
+ * This virtual floppy is found in Sun equipment (x4600, x4200m2, etc.)
+ * Reported by Pete Zaitcev <zaitcev@redhat.com>
+ * This device chokes on both version of MODE SENSE which we have, so
+ * use_10_for_ms is not effective, and we use US_FL_NO_WP_DETECT.
+ */
+UNUSUAL_DEV(  0x046b, 0xff40, 0x0100, 0x0100,
+		"AMI",
+		"Virtual Floppy",
+		US_SC_DEVICE, US_PR_DEVICE, NULL,
+		US_FL_NO_WP_DETECT),
+
 /* Patch submitted by Philipp Friedrich <philipp@void.at> */
 UNUSUAL_DEV(  0x0482, 0x0100, 0x0100, 0x0100,
 		"Kyocera",
diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog
index 35cc4b1..af4ef80 100644
--- a/fs/ntfs/ChangeLog
+++ b/fs/ntfs/ChangeLog
@@ -17,6 +17,13 @@
 	  happen is unclear however so it is worth waiting until someone hits
 	  the problem.
 
+2.1.28 - Fix a deadlock.
+
+	- Fix deadlock in fs/ntfs/inode.c::ntfs_put_inode().  Thanks to Sergey
+	  Vlasov for the report and detailed analysis of the deadlock.  The fix
+	  involved getting rid of ntfs_put_inode() altogether and hence NTFS no
+	  longer has a ->put_inode super operation.
+
 2.1.27 - Various bug fixes and cleanups.
 
 	- Fix two compiler warnings on Alpha.  Thanks to Andrew Morton for
diff --git a/fs/ntfs/Makefile b/fs/ntfs/Makefile
index e27b4ea..8255083 100644
--- a/fs/ntfs/Makefile
+++ b/fs/ntfs/Makefile
@@ -6,7 +6,7 @@
 	     index.o inode.o mft.o mst.o namei.o runlist.o super.o sysctl.o \
 	     unistr.o upcase.o
 
-EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.27\"
+EXTRA_CFLAGS = -DNTFS_VERSION=\"2.1.28\"
 
 ifeq ($(CONFIG_NTFS_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
diff --git a/fs/ntfs/dir.c b/fs/ntfs/dir.c
index 8296c29..74f99a6 100644
--- a/fs/ntfs/dir.c
+++ b/fs/ntfs/dir.c
@@ -1,7 +1,7 @@
 /**
  * dir.c - NTFS kernel directory operations. Part of the Linux-NTFS project.
  *
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
  * Copyright (c) 2002 Richard Russon
  *
  * This program/include file is free software; you can redistribute it and/or
@@ -1249,16 +1249,12 @@
 	/* Get the offset into the index allocation attribute. */
 	ia_pos = (s64)fpos - vol->mft_record_size;
 	ia_mapping = vdir->i_mapping;
-	bmp_vi = ndir->itype.index.bmp_ino;
-	if (unlikely(!bmp_vi)) {
-		ntfs_debug("Inode 0x%lx, regetting index bitmap.", vdir->i_ino);
-		bmp_vi = ntfs_attr_iget(vdir, AT_BITMAP, I30, 4);
-		if (IS_ERR(bmp_vi)) {
-			ntfs_error(sb, "Failed to get bitmap attribute.");
-			err = PTR_ERR(bmp_vi);
-			goto err_out;
-		}
-		ndir->itype.index.bmp_ino = bmp_vi;
+	ntfs_debug("Inode 0x%lx, getting index bitmap.", vdir->i_ino);
+	bmp_vi = ntfs_attr_iget(vdir, AT_BITMAP, I30, 4);
+	if (IS_ERR(bmp_vi)) {
+		ntfs_error(sb, "Failed to get bitmap attribute.");
+		err = PTR_ERR(bmp_vi);
+		goto err_out;
 	}
 	bmp_mapping = bmp_vi->i_mapping;
 	/* Get the starting bitmap bit position and sanity check it. */
@@ -1266,7 +1262,7 @@
 	if (unlikely(bmp_pos >> 3 >= i_size_read(bmp_vi))) {
 		ntfs_error(sb, "Current index allocation position exceeds "
 				"index bitmap size.");
-		goto err_out;
+		goto iput_err_out;
 	}
 	/* Get the starting bit position in the current bitmap page. */
 	cur_bmp_pos = bmp_pos & ((PAGE_CACHE_SIZE * 8) - 1);
@@ -1282,7 +1278,7 @@
 		ntfs_error(sb, "Reading index bitmap failed.");
 		err = PTR_ERR(bmp_page);
 		bmp_page = NULL;
-		goto err_out;
+		goto iput_err_out;
 	}
 	bmp = (u8*)page_address(bmp_page);
 	/* Find next index block in use. */
@@ -1429,6 +1425,7 @@
 			/* @ia_page is already unlocked in this case. */
 			ntfs_unmap_page(ia_page);
 			ntfs_unmap_page(bmp_page);
+			iput(bmp_vi);
 			goto abort;
 		}
 	}
@@ -1439,6 +1436,7 @@
 		ntfs_unmap_page(ia_page);
 	}
 	ntfs_unmap_page(bmp_page);
+	iput(bmp_vi);
 EOD:
 	/* We are finished, set fpos to EOD. */
 	fpos = i_size + vol->mft_record_size;
@@ -1455,8 +1453,11 @@
 	filp->f_pos = fpos;
 	return 0;
 err_out:
-	if (bmp_page)
+	if (bmp_page) {
 		ntfs_unmap_page(bmp_page);
+iput_err_out:
+		iput(bmp_vi);
+	}
 	if (ia_page) {
 		unlock_page(ia_page);
 		ntfs_unmap_page(ia_page);
@@ -1529,14 +1530,22 @@
 static int ntfs_dir_fsync(struct file *filp, struct dentry *dentry,
 		int datasync)
 {
-	struct inode *vi = dentry->d_inode;
-	ntfs_inode *ni = NTFS_I(vi);
+	struct inode *bmp_vi, *vi = dentry->d_inode;
 	int err, ret;
+	ntfs_attr na;
 
 	ntfs_debug("Entering for inode 0x%lx.", vi->i_ino);
 	BUG_ON(!S_ISDIR(vi->i_mode));
-	if (NInoIndexAllocPresent(ni) && ni->itype.index.bmp_ino)
-		write_inode_now(ni->itype.index.bmp_ino, !datasync);
+	/* If the bitmap attribute inode is in memory sync it, too. */
+	na.mft_no = vi->i_ino;
+	na.type = AT_BITMAP;
+	na.name = I30;
+	na.name_len = 4;
+	bmp_vi = ilookup5(vi->i_sb, vi->i_ino, (test_t)ntfs_test_inode, &na);
+	if (bmp_vi) {
+ 		write_inode_now(bmp_vi, !datasync);
+		iput(bmp_vi);
+	}
 	ret = ntfs_write_inode(vi, 1);
 	write_inode_now(vi, !datasync);
 	err = sync_blockdev(vi->i_sb->s_bdev);
diff --git a/fs/ntfs/inode.c b/fs/ntfs/inode.c
index 2479898..f8bf8da 100644
--- a/fs/ntfs/inode.c
+++ b/fs/ntfs/inode.c
@@ -1,7 +1,7 @@
 /**
  * inode.c - NTFS kernel inode handling. Part of the Linux-NTFS project.
  *
- * Copyright (c) 2001-2006 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
  *
  * This program/include file is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as published
@@ -95,7 +95,7 @@
  * If initializing the normal file/directory inode, set @na->type to AT_UNUSED.
  * In that case, @na->name and @na->name_len should be set to NULL and 0,
  * respectively. Although that is not strictly necessary as
- * ntfs_read_inode_locked() will fill them in later.
+ * ntfs_read_locked_inode() will fill them in later.
  *
  * Return 0 on success and -errno on error.
  *
@@ -171,8 +171,8 @@
 struct inode *ntfs_iget(struct super_block *sb, unsigned long mft_no)
 {
 	struct inode *vi;
-	ntfs_attr na;
 	int err;
+	ntfs_attr na;
 
 	na.mft_no = mft_no;
 	na.type = AT_UNUSED;
@@ -229,8 +229,8 @@
 		ntfschar *name, u32 name_len)
 {
 	struct inode *vi;
-	ntfs_attr na;
 	int err;
+	ntfs_attr na;
 
 	/* Make sure no one calls ntfs_attr_iget() for indices. */
 	BUG_ON(type == AT_INDEX_ALLOCATION);
@@ -287,8 +287,8 @@
 		u32 name_len)
 {
 	struct inode *vi;
-	ntfs_attr na;
 	int err;
+	ntfs_attr na;
 
 	na.mft_no = base_vi->i_ino;
 	na.type = AT_INDEX_ALLOCATION;
@@ -402,7 +402,6 @@
 	ntfs_init_runlist(&ni->attr_list_rl);
 	lockdep_set_class(&ni->attr_list_rl.lock,
 				&attr_list_rl_lock_class);
-	ni->itype.index.bmp_ino = NULL;
 	ni->itype.index.block_size = 0;
 	ni->itype.index.vcn_size = 0;
 	ni->itype.index.collation_rule = 0;
@@ -546,6 +545,7 @@
 {
 	ntfs_volume *vol = NTFS_SB(vi->i_sb);
 	ntfs_inode *ni;
+	struct inode *bvi;
 	MFT_RECORD *m;
 	ATTR_RECORD *a;
 	STANDARD_INFORMATION *si;
@@ -780,7 +780,6 @@
 	 */
 	if (S_ISDIR(vi->i_mode)) {
 		loff_t bvi_size;
-		struct inode *bvi;
 		ntfs_inode *bni;
 		INDEX_ROOT *ir;
 		u8 *ir_end, *index_end;
@@ -985,13 +984,12 @@
 			err = PTR_ERR(bvi);
 			goto unm_err_out;
 		}
-		ni->itype.index.bmp_ino = bvi;
 		bni = NTFS_I(bvi);
 		if (NInoCompressed(bni) || NInoEncrypted(bni) ||
 				NInoSparse(bni)) {
 			ntfs_error(vi->i_sb, "$BITMAP attribute is compressed "
 					"and/or encrypted and/or sparse.");
-			goto unm_err_out;
+			goto iput_unm_err_out;
 		}
 		/* Consistency check bitmap size vs. index allocation size. */
 		bvi_size = i_size_read(bvi);
@@ -1000,8 +998,10 @@
 			ntfs_error(vi->i_sb, "Index bitmap too small (0x%llx) "
 					"for index allocation (0x%llx).",
 					bvi_size << 3, vi->i_size);
-			goto unm_err_out;
+			goto iput_unm_err_out;
 		}
+		/* No longer need the bitmap attribute inode. */
+		iput(bvi);
 skip_large_dir_stuff:
 		/* Setup the operations for this inode. */
 		vi->i_op = &ntfs_dir_inode_ops;
@@ -1176,7 +1176,8 @@
 		vi->i_blocks = ni->allocated_size >> 9;
 	ntfs_debug("Done.");
 	return 0;
-
+iput_unm_err_out:
+	iput(bvi);
 unm_err_out:
 	if (!err)
 		err = -EIO;
@@ -1697,7 +1698,7 @@
 				vi->i_size);
 		goto iput_unm_err_out;
 	}
-	ni->itype.index.bmp_ino = bvi;
+	iput(bvi);
 skip_large_index_stuff:
 	/* Setup the operations for this index inode. */
 	vi->i_op = NULL;
@@ -1714,7 +1715,6 @@
 
 	ntfs_debug("Done.");
 	return 0;
-
 iput_unm_err_out:
 	iput(bvi);
 unm_err_out:
@@ -2191,37 +2191,6 @@
 	return -1;
 }
 
-/**
- * ntfs_put_inode - handler for when the inode reference count is decremented
- * @vi:		vfs inode
- *
- * The VFS calls ntfs_put_inode() every time the inode reference count (i_count)
- * is about to be decremented (but before the decrement itself.
- *
- * If the inode @vi is a directory with two references, one of which is being
- * dropped, we need to put the attribute inode for the directory index bitmap,
- * if it is present, otherwise the directory inode would remain pinned for
- * ever.
- */
-void ntfs_put_inode(struct inode *vi)
-{
-	if (S_ISDIR(vi->i_mode) && atomic_read(&vi->i_count) == 2) {
-		ntfs_inode *ni = NTFS_I(vi);
-		if (NInoIndexAllocPresent(ni)) {
-			struct inode *bvi = NULL;
-			mutex_lock(&vi->i_mutex);
-			if (atomic_read(&vi->i_count) == 2) {
-				bvi = ni->itype.index.bmp_ino;
-				if (bvi)
-					ni->itype.index.bmp_ino = NULL;
-			}
-			mutex_unlock(&vi->i_mutex);
-			if (bvi)
-				iput(bvi);
-		}
-	}
-}
-
 static void __ntfs_clear_inode(ntfs_inode *ni)
 {
 	/* Free all alocated memory. */
@@ -2287,18 +2256,6 @@
 {
 	ntfs_inode *ni = NTFS_I(vi);
 
-	/*
-	 * If the inode @vi is an index inode we need to put the attribute
-	 * inode for the index bitmap, if it is present, otherwise the index
-	 * inode would disappear and the attribute inode for the index bitmap
-	 * would no longer be referenced from anywhere and thus it would remain
-	 * pinned for ever.
-	 */
-	if (NInoAttr(ni) && (ni->type == AT_INDEX_ALLOCATION) &&
-			NInoIndexAllocPresent(ni) && ni->itype.index.bmp_ino) {
-		iput(ni->itype.index.bmp_ino);
-		ni->itype.index.bmp_ino = NULL;
-	}
 #ifdef NTFS_RW
 	if (NInoDirty(ni)) {
 		bool was_bad = (is_bad_inode(vi));
diff --git a/fs/ntfs/inode.h b/fs/ntfs/inode.h
index f088291..117eaf8 100644
--- a/fs/ntfs/inode.h
+++ b/fs/ntfs/inode.h
@@ -2,7 +2,7 @@
  * inode.h - Defines for inode structures NTFS Linux kernel driver. Part of
  *	     the Linux-NTFS project.
  *
- * Copyright (c) 2001-2005 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
  * Copyright (c) 2002 Richard Russon
  *
  * This program/include file is free software; you can redistribute it and/or
@@ -101,8 +101,6 @@
 	runlist attr_list_rl;	/* Run list for the attribute list value. */
 	union {
 		struct { /* It is a directory, $MFT, or an index inode. */
-			struct inode *bmp_ino;	/* Attribute inode for the
-						   index $BITMAP. */
 			u32 block_size;		/* Size of an index block. */
 			u32 vcn_size;		/* Size of a vcn in this
 						   index. */
@@ -300,8 +298,6 @@
 
 extern int ntfs_read_inode_mount(struct inode *vi);
 
-extern void ntfs_put_inode(struct inode *vi);
-
 extern int ntfs_show_options(struct seq_file *sf, struct vfsmount *mnt);
 
 #ifdef NTFS_RW
diff --git a/fs/ntfs/super.c b/fs/ntfs/super.c
index 03a391a..babf94d 100644
--- a/fs/ntfs/super.c
+++ b/fs/ntfs/super.c
@@ -1,7 +1,7 @@
 /*
  * super.c - NTFS kernel super block handling. Part of the Linux-NTFS project.
  *
- * Copyright (c) 2001-2006 Anton Altaparmakov
+ * Copyright (c) 2001-2007 Anton Altaparmakov
  * Copyright (c) 2001,2002 Richard Russon
  *
  * This program/include file is free software; you can redistribute it and/or
@@ -2702,9 +2702,6 @@
 static struct super_operations ntfs_sops = {
 	.alloc_inode	= ntfs_alloc_big_inode,	  /* VFS: Allocate new inode. */
 	.destroy_inode	= ntfs_destroy_big_inode, /* VFS: Deallocate inode. */
-	.put_inode	= ntfs_put_inode,	  /* VFS: Called just before
-						     the inode reference count
-						     is decreased. */
 #ifdef NTFS_RW
 	//.dirty_inode	= NULL,			/* VFS: Called from
 	//					   __mark_inode_dirty(). */
@@ -3261,7 +3258,7 @@
 }
 
 MODULE_AUTHOR("Anton Altaparmakov <aia21@cantab.net>");
-MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2006 Anton Altaparmakov");
+MODULE_DESCRIPTION("NTFS 1.2/3.x driver - Copyright (c) 2001-2007 Anton Altaparmakov");
 MODULE_VERSION(NTFS_VERSION);
 MODULE_LICENSE("GPL");
 #ifdef DEBUG
diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index 06be6e7..56e1fef 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -60,14 +60,11 @@
 
 	inode = ocfs2_iget(OCFS2_SB(sb), handle->ih_blkno, 0);
 
-	if (IS_ERR(inode)) {
-		mlog_errno(PTR_ERR(inode));
+	if (IS_ERR(inode))
 		return (void *)inode;
-	}
 
 	if (handle->ih_generation != inode->i_generation) {
 		iput(inode);
-		mlog_errno(-ESTALE);
 		return ERR_PTR(-ESTALE);
 	}
 
diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c
index e4d9149..28ab56f 100644
--- a/fs/ocfs2/inode.c
+++ b/fs/ocfs2/inode.c
@@ -146,7 +146,6 @@
 	if (is_bad_inode(inode)) {
 		iput(inode);
 		inode = ERR_PTR(-ESTALE);
-		mlog_errno(PTR_ERR(inode));
 		goto bail;
 	}
 
@@ -155,8 +154,7 @@
 		mlog(0, "returning inode with number %llu\n",
 		     (unsigned long long)OCFS2_I(inode)->ip_blkno);
 		mlog_exit_ptr(inode);
-	} else
-		mlog_errno(PTR_ERR(inode));
+	}
 
 	return inode;
 }
@@ -247,7 +245,7 @@
 	 * today.  change if needed. */
 	if (!OCFS2_IS_VALID_DINODE(fe) ||
 	    !(fe->i_flags & cpu_to_le32(OCFS2_VALID_FL))) {
-		mlog(ML_ERROR, "Invalid dinode: i_ino=%lu, i_blkno=%llu, "
+		mlog(0, "Invalid dinode: i_ino=%lu, i_blkno=%llu, "
 		     "signature = %.*s, flags = 0x%x\n",
 		     inode->i_ino,
 		     (unsigned long long)le64_to_cpu(fe->i_blkno), 7,
@@ -478,11 +476,8 @@
 	    S_ISBLK(le16_to_cpu(fe->i_mode)))
     		inode->i_rdev = huge_decode_dev(le64_to_cpu(fe->id1.dev1.i_rdev));
 
-	if (ocfs2_populate_inode(inode, fe, 0) < 0) {
-		mlog(ML_ERROR, "populate failed! i_blkno=%llu, i_ino=%lu\n",
-		     (unsigned long long)fe->i_blkno, inode->i_ino);
+	if (ocfs2_populate_inode(inode, fe, 0) < 0)
 		goto bail;
-	}
 
 	BUG_ON(args->fi_blkno != le64_to_cpu(fe->i_blkno));
 
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 9637039..f3d7803 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -932,14 +932,15 @@
 		goto leave;
 	}
 
-	if (S_ISDIR(inode->i_mode)) {
+	dir->i_ctime = dir->i_mtime = CURRENT_TIME;
+	if (S_ISDIR(inode->i_mode))
 		drop_nlink(dir);
-		status = ocfs2_mark_inode_dirty(handle, dir,
-						parent_node_bh);
-		if (status < 0) {
-			mlog_errno(status);
+
+	status = ocfs2_mark_inode_dirty(handle, dir, parent_node_bh);
+	if (status < 0) {
+		mlog_errno(status);
+		if (S_ISDIR(inode->i_mode))
 			inc_nlink(dir);
-		}
 	}
 
 leave:
@@ -1068,6 +1069,7 @@
 	char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
 	struct buffer_head *orphan_entry_bh = NULL;
 	struct buffer_head *newfe_bh = NULL;
+	struct buffer_head *old_inode_bh = NULL;
 	struct buffer_head *insert_entry_bh = NULL;
 	struct ocfs2_super *osb = NULL;
 	u64 newfe_blkno;
@@ -1079,7 +1081,7 @@
 	struct buffer_head *new_de_bh = NULL, *old_de_bh = NULL; // bhs for above
 	struct buffer_head *old_inode_de_bh = NULL; // if old_dentry is a dir,
 						    // this is the 1st dirent bh
-	nlink_t old_dir_nlink = old_dir->i_nlink, new_dir_nlink = new_dir->i_nlink;
+	nlink_t old_dir_nlink = old_dir->i_nlink;
 
 	/* At some point it might be nice to break this function up a
 	 * bit. */
@@ -1139,12 +1141,11 @@
 	}
 
 	/*
-	 * Though we don't require an inode meta data update if
-	 * old_inode is not a directory, we lock anyway here to ensure
-	 * the vote thread on other nodes won't have to concurrently
-	 * downconvert the inode and the dentry locks.
+	 * Aside from allowing a meta data update, the locking here
+	 * also ensures that the vote thread on other nodes won't have
+	 * to concurrently downconvert the inode and the dentry locks.
 	 */
-	status = ocfs2_meta_lock(old_inode, NULL, 1);
+	status = ocfs2_meta_lock(old_inode, &old_inode_bh, 1);
 	if (status < 0) {
 		if (status != -ENOENT)
 			mlog_errno(status);
@@ -1355,6 +1356,7 @@
 
 	old_inode->i_ctime = CURRENT_TIME;
 	mark_inode_dirty(old_inode);
+	ocfs2_mark_inode_dirty(handle, old_inode, old_inode_bh);
 
 	/* now that the name has been added to new_dir, remove the old name */
 	status = ocfs2_delete_entry(handle, old_dir, old_de, old_de_bh);
@@ -1384,27 +1386,22 @@
 		}
 	}
 	mark_inode_dirty(old_dir);
-	if (new_inode)
+	ocfs2_mark_inode_dirty(handle, old_dir, old_dir_bh);
+	if (new_inode) {
 		mark_inode_dirty(new_inode);
+		ocfs2_mark_inode_dirty(handle, new_inode, newfe_bh);
+	}
 
-	if (old_dir != new_dir)
-		if (new_dir_nlink != new_dir->i_nlink) {
-			if (!new_dir_bh) {
-				mlog(ML_ERROR, "need to change nlink for new "
-				     "dir %llu from %d to %d but bh is NULL\n",
-				     (unsigned long long)OCFS2_I(new_dir)->ip_blkno,
-				     (int)new_dir_nlink, new_dir->i_nlink);
-			} else {
-				struct ocfs2_dinode *fe;
-				status = ocfs2_journal_access(handle,
-							      new_dir,
-							      new_dir_bh,
-							      OCFS2_JOURNAL_ACCESS_WRITE);
-				fe = (struct ocfs2_dinode *) new_dir_bh->b_data;
-				fe->i_links_count = cpu_to_le16(new_dir->i_nlink);
-				status = ocfs2_journal_dirty(handle, new_dir_bh);
-			}
-		}
+	if (old_dir != new_dir) {
+		/* Keep the same times on both directories.*/
+		new_dir->i_ctime = new_dir->i_mtime = old_dir->i_ctime;
+
+		/*
+		 * This will also pick up the i_nlink change from the
+		 * block above.
+		 */
+		ocfs2_mark_inode_dirty(handle, new_dir, new_dir_bh);
+	}
 
 	if (old_dir_nlink != old_dir->i_nlink) {
 		if (!old_dir_bh) {
@@ -1455,6 +1452,8 @@
 		iput(new_inode);
 	if (newfe_bh)
 		brelse(newfe_bh);
+	if (old_inode_bh)
+		brelse(old_inode_bh);
 	if (old_dir_bh)
 		brelse(old_dir_bh);
 	if (new_dir_bh)
@@ -1826,6 +1825,13 @@
 		     (le16_to_cpu(de->rec_len) >= rec_len)) ||
 		    (le16_to_cpu(de->rec_len) >=
 		     (OCFS2_DIR_REC_LEN(de->name_len) + rec_len))) {
+			dir->i_mtime = dir->i_ctime = CURRENT_TIME;
+			retval = ocfs2_mark_inode_dirty(handle, dir, parent_fe_bh);
+			if (retval < 0) {
+				mlog_errno(retval);
+				goto bail;
+			}
+
 			status = ocfs2_journal_access(handle, dir, insert_bh,
 						      OCFS2_JOURNAL_ACCESS_WRITE);
 			/* By now the buffer is marked for journaling */
@@ -1848,7 +1854,6 @@
 			de->name_len = namelen;
 			memcpy(de->name, name, namelen);
 
-			dir->i_mtime = dir->i_ctime = CURRENT_TIME;
 			dir->i_version++;
 			status = ocfs2_journal_dirty(handle, insert_bh);
 			retval = 0;
diff --git a/fs/ocfs2/ocfs2_fs.h b/fs/ocfs2/ocfs2_fs.h
index b5c6856..c99e9058 100644
--- a/fs/ocfs2/ocfs2_fs.h
+++ b/fs/ocfs2/ocfs2_fs.h
@@ -85,7 +85,7 @@
 #define OCFS2_CLEAR_INCOMPAT_FEATURE(sb,mask)			\
 	OCFS2_SB(sb)->s_feature_incompat &= ~(mask)
 
-#define OCFS2_FEATURE_COMPAT_SUPP	0
+#define OCFS2_FEATURE_COMPAT_SUPP	OCFS2_FEATURE_COMPAT_BACKUP_SB
 #define OCFS2_FEATURE_INCOMPAT_SUPP	OCFS2_FEATURE_INCOMPAT_LOCAL_MOUNT
 #define OCFS2_FEATURE_RO_COMPAT_SUPP	0
 
@@ -110,6 +110,20 @@
 #define OCFS2_FEATURE_INCOMPAT_SPARSE_ALLOC	0x0010
 
 /*
+ * backup superblock flag is used to indicate that this volume
+ * has backup superblocks.
+ */
+#define OCFS2_FEATURE_COMPAT_BACKUP_SB		0x0001
+
+/* The byte offset of the first backup block will be 1G.
+ * The following will be 4G, 16G, 64G, 256G and 1T.
+ */
+#define OCFS2_BACKUP_SB_START			1 << 30
+
+/* the max backup superblock nums */
+#define OCFS2_MAX_BACKUP_SUPERBLOCKS	6
+
+/*
  * Flags on ocfs2_dinode.i_flags
  */
 #define OCFS2_VALID_FL		(0x00000001)	/* Inode is valid */
@@ -566,6 +580,20 @@
 
 	return size / sizeof(struct ocfs2_truncate_rec);
 }
+
+static inline u64 ocfs2_backup_super_blkno(struct super_block *sb, int index)
+{
+	u64 offset = OCFS2_BACKUP_SB_START;
+
+	if (index >= 0 && index < OCFS2_MAX_BACKUP_SUPERBLOCKS) {
+		offset <<= (2 * index);
+		offset /= sb->s_blocksize;
+		return offset;
+	}
+
+	return 0;
+
+}
 #else
 static inline int ocfs2_fast_symlink_chars(int blocksize)
 {
@@ -631,6 +659,19 @@
 
 	return size / sizeof(struct ocfs2_truncate_rec);
 }
+
+static inline uint64_t ocfs2_backup_super_blkno(int blocksize, int index)
+{
+	uint64_t offset = OCFS2_BACKUP_SB_START;
+
+	if (index >= 0 && index < OCFS2_MAX_BACKUP_SUPERBLOCKS) {
+		offset <<= (2 * index);
+		offset /= blocksize;
+		return offset;
+	}
+
+	return 0;
+}
 #endif  /* __KERNEL__ */
 
 
diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index 957d687..03b0191 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -158,8 +158,7 @@
 	}
 
 	status = vfs_follow_link(nd, link);
-	if (status && status != -ENOENT)
-		mlog_errno(status);
+
 bail:
 	if (page) {
 		kunmap(page);
diff --git a/include/asm-powerpc/atomic.h b/include/asm-powerpc/atomic.h
index 53283e2..f038e33 100644
--- a/include/asm-powerpc/atomic.h
+++ b/include/asm-powerpc/atomic.h
@@ -207,7 +207,8 @@
 
 /*
  * Atomically test *v and decrement if it is greater than 0.
- * The function returns the old value of *v minus 1.
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
  */
 static __inline__ int atomic_dec_if_positive(atomic_t *v)
 {
@@ -216,14 +217,15 @@
 	__asm__ __volatile__(
 	LWSYNC_ON_SMP
 "1:	lwarx	%0,0,%1		# atomic_dec_if_positive\n\
-	addic.	%0,%0,-1\n\
+	cmpwi	%0,1\n\
+	addi	%0,%0,-1\n\
 	blt-	2f\n"
 	PPC405_ERR77(0,%1)
 "	stwcx.	%0,0,%1\n\
 	bne-	1b"
 	ISYNC_ON_SMP
 	"\n\
-2:"	: "=&r" (t)
+2:"	: "=&b" (t)
 	: "r" (&v->counter)
 	: "cc", "memory");
 
diff --git a/include/linux/hid-debug.h b/include/linux/hid-debug.h
index f04d6d7..8e4dbb5 100644
--- a/include/linux/hid-debug.h
+++ b/include/linux/hid-debug.h
@@ -700,9 +700,10 @@
 
 static char *relatives[REL_MAX + 1] = {
 	[REL_X] = "X",			[REL_Y] = "Y",
-	[REL_Z] = "Z",			[REL_HWHEEL] = "HWheel",
-	[REL_DIAL] = "Dial",		[REL_WHEEL] = "Wheel",
-	[REL_MISC] = "Misc",
+	[REL_Z] = "Z",			[REL_RX] = "Rx",
+	[REL_RY] = "Ry",		[REL_RZ] = "Rz",
+	[REL_HWHEEL] = "HWheel",	[REL_DIAL] = "Dial",
+	[REL_WHEEL] = "Wheel",		[REL_MISC] = "Misc",
 };
 
 static char *absolutes[ABS_MAX + 1] = {
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ab27548..e53a13b 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1143,6 +1143,7 @@
 
 static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
 {
+	qc->dma_dir = DMA_NONE;
 	qc->__sg = NULL;
 	qc->flags = 0;
 	qc->cursect = qc->cursg = qc->cursg_ofs = 0;
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index a3594df..bcf2490 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -42,7 +42,7 @@
 #define MMC_RSP_R1B	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE|MMC_RSP_BUSY)
 #define MMC_RSP_R2	(MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
 #define MMC_RSP_R3	(MMC_RSP_PRESENT)
-#define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC)
+#define MMC_RSP_R6	(MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
 
 #define mmc_resp_type(cmd)	((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
 
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 5cb380a..d94e268 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -662,6 +662,15 @@
 #define V4L2_STD_ATSC_8_VSB     ((v4l2_std_id)0x01000000)
 #define V4L2_STD_ATSC_16_VSB    ((v4l2_std_id)0x02000000)
 
+/* FIXME:
+   Although std_id is 64 bits, there is an issue on PPC32 architecture that
+   makes switch(__u64) to break. So, there's a hack on v4l2-common.c rounding
+   this value to 32 bits.
+   As, currently, the max value is for V4L2_STD_ATSC_16_VSB (30 bits wide),
+   it should work fine. However, if needed to add more than two standards,
+   v4l2-common.c should be fixed.
+ */
+
 /* some merged standards */
 #define V4L2_STD_MN	(V4L2_STD_PAL_M|V4L2_STD_PAL_N|V4L2_STD_PAL_Nc|V4L2_STD_NTSC)
 #define V4L2_STD_B	(V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_SECAM_B)