/*
 * USB Cypress M8 driver
 *
 * 	Copyright (C) 2004
 * 	    Lonnie Mendez (dignome@gmail.com) 
 *	Copyright (C) 2003,2004
 *	    Neil Whelchel (koyama@firstlight.net)
 *
 * 	This program is free software; you can redistribute it and/or modify
 * 	it under the terms of the GNU General Public License as published by
 * 	the Free Software Foundation; either version 2 of the License, or
 * 	(at your option) any later version.
 *
 * See Documentation/usb/usb-serial.txt for more information on using this driver
 *
 * See http://geocities.com/i0xox0i for information on this driver and the
 * earthmate usb device.
 *
 *  Lonnie Mendez <dignome@gmail.com>
 *  4-29-2005
 *	Fixed problem where setting or retreiving the serial config would fail with
 * 	EPIPE.  Removed CRTS toggling so the driver behaves more like other usbserial
 * 	adapters.  Issued new interval of 1ms instead of the default 10ms.  As a
 * 	result, transfer speed has been substantially increased.  From avg. 850bps to
 * 	avg. 3300bps.  initial termios has also been modified.  Cleaned up code and
 * 	formatting issues so it is more readable.  Replaced the C++ style comments.
 *
 *  Lonnie Mendez <dignome@gmail.com>
 *  12-15-2004
 *	Incorporated write buffering from pl2303 driver.  Fixed bug with line
 *	handling so both lines are raised in cypress_open. (was dropping rts)
 *      Various code cleanups made as well along with other misc bug fixes.
 *
 *  Lonnie Mendez <dignome@gmail.com>
 *  04-10-2004
 *	Driver modified to support dynamic line settings.  Various improvments
 *      and features.
 *
 *  Neil Whelchel
 *  10-2003
 *	Driver first released.
 *
 */

/* Thanks to Neil Whelchel for writing the first cypress m8 implementation for linux. */
/* Thanks to cypress for providing references for the hid reports. */
/* Thanks to Jiang Zhang for providing links and for general help. */
/* Code originates and was built up from ftdi_sio, belkin, pl2303 and others. */


#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/serial.h>
#include <linux/delay.h>
#include <asm/uaccess.h>

#include "usb-serial.h"
#include "cypress_m8.h"


#ifdef CONFIG_USB_SERIAL_DEBUG
	static int debug = 1;
#else
	static int debug;
#endif
static int stats;
static int interval;

/*
 * Version Information
 */
#define DRIVER_VERSION "v1.09"
#define DRIVER_AUTHOR "Lonnie Mendez <dignome@gmail.com>, Neil Whelchel <koyama@firstlight.net>"
#define DRIVER_DESC "Cypress USB to Serial Driver"

/* write buffer size defines */
#define CYPRESS_BUF_SIZE	1024
#define CYPRESS_CLOSING_WAIT	(30*HZ)

static struct usb_device_id id_table_earthmate [] = {
	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
	{ }						/* Terminating entry */
};

static struct usb_device_id id_table_cyphidcomrs232 [] = {
	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
	{ }						/* Terminating entry */
};

static struct usb_device_id id_table_combined [] = {
	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) },
	{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
	{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
	{ }						/* Terminating entry */
};

MODULE_DEVICE_TABLE (usb, id_table_combined);

static struct usb_driver cypress_driver = {
	.name =		"cypress",
	.probe =	usb_serial_probe,
	.disconnect =	usb_serial_disconnect,
	.id_table =	id_table_combined,
};

struct cypress_private {
	spinlock_t lock;		   /* private lock */
	int chiptype;			   /* identifier of device, for quirks/etc */
	int bytes_in;			   /* used for statistics */
	int bytes_out;			   /* used for statistics */
	int cmd_count;			   /* used for statistics */
	int cmd_ctrl;			   /* always set this to 1 before issuing a command */
	struct cypress_buf *buf;	   /* write buffer */
	int write_urb_in_use;		   /* write urb in use indicator */
	int termios_initialized;
	__u8 line_control;	   	   /* holds dtr / rts value */
	__u8 current_status;	   	   /* received from last read - info on dsr,cts,cd,ri,etc */
	__u8 current_config;	   	   /* stores the current configuration byte */
	__u8 rx_flags;			   /* throttling - used from whiteheat/ftdi_sio */
	int baud_rate;			   /* stores current baud rate in integer form */
	int cbr_mask;			   /* stores current baud rate in masked form */
	int isthrottled;		   /* if throttled, discard reads */
	wait_queue_head_t delta_msr_wait;  /* used for TIOCMIWAIT */
	char prev_status, diff_status;	   /* used for TIOCMIWAIT */
	/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
	struct termios tmp_termios; 	   /* stores the old termios settings */
};

/* write buffer structure */
struct cypress_buf {
	unsigned int	buf_size;
	char		*buf_buf;
	char		*buf_get;
	char		*buf_put;
};

/* function prototypes for the Cypress USB to serial device */
static int  cypress_earthmate_startup	(struct usb_serial *serial);
static int  cypress_hidcom_startup	(struct usb_serial *serial);
static void cypress_shutdown		(struct usb_serial *serial);
static int  cypress_open		(struct usb_serial_port *port, struct file *filp);
static void cypress_close		(struct usb_serial_port *port, struct file *filp);
static int  cypress_write		(struct usb_serial_port *port, const unsigned char *buf, int count);
static void cypress_send		(struct usb_serial_port *port);
static int  cypress_write_room		(struct usb_serial_port *port);
static int  cypress_ioctl		(struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg);
static void cypress_set_termios		(struct usb_serial_port *port, struct termios * old);
static int  cypress_tiocmget		(struct usb_serial_port *port, struct file *file);
static int  cypress_tiocmset		(struct usb_serial_port *port, struct file *file, unsigned int set, unsigned int clear);
static int  cypress_chars_in_buffer	(struct usb_serial_port *port);
static void cypress_throttle		(struct usb_serial_port *port);
static void cypress_unthrottle		(struct usb_serial_port *port);
static void cypress_read_int_callback	(struct urb *urb, struct pt_regs *regs);
static void cypress_write_int_callback	(struct urb *urb, struct pt_regs *regs);
/* baud helper functions */
static int	 mask_to_rate		(unsigned mask);
static unsigned  rate_to_mask		(int rate);
/* write buffer functions */
static struct cypress_buf *cypress_buf_alloc(unsigned int size);
static void 		  cypress_buf_free(struct cypress_buf *cb);
static void		  cypress_buf_clear(struct cypress_buf *cb);
static unsigned int	  cypress_buf_data_avail(struct cypress_buf *cb);
static unsigned int	  cypress_buf_space_avail(struct cypress_buf *cb);
static unsigned int	  cypress_buf_put(struct cypress_buf *cb, const char *buf, unsigned int count);
static unsigned int	  cypress_buf_get(struct cypress_buf *cb, char *buf, unsigned int count);


static struct usb_serial_driver cypress_earthmate_device = {
	.driver = {
		.owner =		THIS_MODULE,
		.name =			"earthmate",
	},
	.description =			"DeLorme Earthmate USB",
	.id_table =			id_table_earthmate,
	.num_interrupt_in = 		1,
	.num_interrupt_out =		1,
	.num_bulk_in =			NUM_DONT_CARE,
	.num_bulk_out =			NUM_DONT_CARE,
	.num_ports =			1,
	.attach =			cypress_earthmate_startup,
	.shutdown =			cypress_shutdown,
	.open =				cypress_open,
	.close =			cypress_close,
	.write =			cypress_write,
	.write_room =			cypress_write_room,
	.ioctl =			cypress_ioctl,
	.set_termios =			cypress_set_termios,
	.tiocmget =			cypress_tiocmget,
	.tiocmset =			cypress_tiocmset,
	.chars_in_buffer =		cypress_chars_in_buffer,
	.throttle =		 	cypress_throttle,
	.unthrottle =			cypress_unthrottle,
	.read_int_callback =		cypress_read_int_callback,
	.write_int_callback =		cypress_write_int_callback,
};

static struct usb_serial_driver cypress_hidcom_device = {
	.driver = {
		.owner =		THIS_MODULE,
		.name =			"cyphidcom",
	},
	.description =			"HID->COM RS232 Adapter",
	.id_table =			id_table_cyphidcomrs232,
	.num_interrupt_in =		1,
	.num_interrupt_out =		1,
	.num_bulk_in =			NUM_DONT_CARE,
	.num_bulk_out =			NUM_DONT_CARE,
	.num_ports =			1,
	.attach =			cypress_hidcom_startup,
	.shutdown =			cypress_shutdown,
	.open =				cypress_open,
	.close =			cypress_close,
	.write =			cypress_write,
	.write_room =			cypress_write_room,
	.ioctl =			cypress_ioctl,
	.set_termios =			cypress_set_termios,
	.tiocmget =			cypress_tiocmget,
	.tiocmset =			cypress_tiocmset,
	.chars_in_buffer =		cypress_chars_in_buffer,
	.throttle =			cypress_throttle,
	.unthrottle =			cypress_unthrottle,
	.read_int_callback =		cypress_read_int_callback,
	.write_int_callback =		cypress_write_int_callback,
};


/*****************************************************************************
 * Cypress serial helper functions
 *****************************************************************************/


/* This function can either set or retrieve the current serial line settings */
static int cypress_serial_control (struct usb_serial_port *port, unsigned baud_mask, int data_bits, int stop_bits,
				   int parity_enable, int parity_type, int reset, int cypress_request_type)
{
	int new_baudrate = 0, retval = 0, tries = 0;
	struct cypress_private *priv;
	__u8 feature_buffer[8];
	unsigned long flags;

	dbg("%s", __FUNCTION__);
	
	priv = usb_get_serial_port_data(port);

	switch(cypress_request_type) {
		case CYPRESS_SET_CONFIG:

			/*
			 * The general purpose firmware for the Cypress M8 allows for a maximum speed
 			 * of 57600bps (I have no idea whether DeLorme chose to use the general purpose
			 * firmware or not), if you need to modify this speed setting for your own
			 * project please add your own chiptype and modify the code likewise.  The
			 * Cypress HID->COM device will work successfully up to 115200bps (but the
			 * actual throughput is around 3kBps).
			 */
			if (baud_mask != priv->cbr_mask) {
				dbg("%s - baud rate is changing", __FUNCTION__);
				if ( priv->chiptype == CT_EARTHMATE ) {
					/* 300 and 600 baud rates are supported under the generic firmware,
					 * but are not used with NMEA and SiRF protocols */
					
					if ( (baud_mask == B300) || (baud_mask == B600) ) {
						err("%s - failed setting baud rate, unsupported speed",
						    __FUNCTION__);
						new_baudrate = priv->baud_rate;
					} else if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
						err("%s - failed setting baud rate, unsupported speed",
						    __FUNCTION__);
						new_baudrate = priv->baud_rate;
					}
				} else if (priv->chiptype == CT_CYPHIDCOM) {
					if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
						err("%s - failed setting baud rate, unsupported speed",
						    __FUNCTION__);
						new_baudrate = priv->baud_rate;
					}
				} else if (priv->chiptype == CT_GENERIC) {
					if ( (new_baudrate = mask_to_rate(baud_mask)) == -1) {
						err("%s - failed setting baud rate, unsupported speed",
						    __FUNCTION__);
						new_baudrate = priv->baud_rate;
					}
				} else {
					info("%s - please define your chiptype", __FUNCTION__);
					new_baudrate = priv->baud_rate;
				}
			} else {  /* baud rate not changing, keep the old */
				new_baudrate = priv->baud_rate;
			}
			dbg("%s - baud rate is being sent as %d", __FUNCTION__, new_baudrate);
			
			memset(feature_buffer, 0, 8);
			/* fill the feature_buffer with new configuration */
			*((u_int32_t *)feature_buffer) = new_baudrate;

			feature_buffer[4] |= data_bits;   /* assign data bits in 2 bit space ( max 3 ) */
			/* 1 bit gap */
			feature_buffer[4] |= (stop_bits << 3);   /* assign stop bits in 1 bit space */
			feature_buffer[4] |= (parity_enable << 4);   /* assign parity flag in 1 bit space */
			feature_buffer[4] |= (parity_type << 5);   /* assign parity type in 1 bit space */
			/* 1 bit gap */
			feature_buffer[4] |= (reset << 7);   /* assign reset at end of byte, 1 bit space */
				
			dbg("%s - device is being sent this feature report:", __FUNCTION__);
			dbg("%s - %02X - %02X - %02X - %02X - %02X", __FUNCTION__, feature_buffer[0], feature_buffer[1],
		            feature_buffer[2], feature_buffer[3], feature_buffer[4]);
			
			do {
			retval = usb_control_msg (port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
					  	  HID_REQ_SET_REPORT, USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
						  	  0x0300, 0, feature_buffer, 8, 500);

				if (tries++ >= 3)
					break;

				if (retval == EPIPE)
					usb_clear_halt(port->serial->dev, 0x00);
			} while (retval != 8 && retval != ENODEV);

			if (retval != 8)
				err("%s - failed sending serial line settings - %d", __FUNCTION__, retval);
			else {
				spin_lock_irqsave(&priv->lock, flags);
				priv->baud_rate = new_baudrate;
				priv->cbr_mask = baud_mask;
				priv->current_config = feature_buffer[4];
				spin_unlock_irqrestore(&priv->lock, flags);
			}
		break;
		case CYPRESS_GET_CONFIG:
			dbg("%s - retreiving serial line settings", __FUNCTION__);
			/* set initial values in feature buffer */
			memset(feature_buffer, 0, 8);

			do {
			retval = usb_control_msg (port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0),
						  HID_REQ_GET_REPORT, USB_DIR_IN | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
							  0x0300, 0, feature_buffer, 8, 500);
				
				if (tries++ >= 3)
					break;

				if (retval == EPIPE)
					usb_clear_halt(port->serial->dev, 0x00);
			} while (retval != 5 && retval != ENODEV);

			if (retval != 5) {
				err("%s - failed to retreive serial line settings - %d", __FUNCTION__, retval);
				return retval;
			} else {
				spin_lock_irqsave(&priv->lock, flags);

				/* store the config in one byte, and later use bit masks to check values */
				priv->current_config = feature_buffer[4];
				priv->baud_rate = *((u_int32_t *)feature_buffer);
				
				if ( (priv->cbr_mask = rate_to_mask(priv->baud_rate)) == 0x40)
					dbg("%s - failed setting the baud mask (not defined)", __FUNCTION__);
				spin_unlock_irqrestore(&priv->lock, flags);
			}
	}
	spin_lock_irqsave(&priv->lock, flags);
	++priv->cmd_count;
	spin_unlock_irqrestore(&priv->lock, flags);

	return retval;
} /* cypress_serial_control */


/* given a baud mask, it will return integer baud on success */
static int mask_to_rate (unsigned mask)
{
	int rate;

	switch (mask) {
		case B0: rate = 0; break;
		case B300: rate = 300; break;
		case B600: rate = 600; break;
		case B1200: rate = 1200; break;
		case B2400: rate = 2400; break;
		case B4800: rate = 4800; break;
		case B9600: rate = 9600; break;
		case B19200: rate = 19200; break;
		case B38400: rate = 38400; break;
		case B57600: rate = 57600; break;
		case B115200: rate = 115200; break;
		default: rate = -1;
	}

	return rate;
}


static unsigned rate_to_mask (int rate)
{
	unsigned mask;

	switch (rate) {
		case 0: mask = B0; break;
		case 300: mask = B300; break;
		case 600: mask = B600; break;
		case 1200: mask = B1200; break;
		case 2400: mask = B2400; break;
		case 4800: mask = B4800; break;
		case 9600: mask = B9600; break;
		case 19200: mask = B19200; break;
		case 38400: mask = B38400; break;
		case 57600: mask = B57600; break;
		case 115200: mask = B115200; break;
		default: mask = 0x40;
	}

	return mask;
}
/*****************************************************************************
 * Cypress serial driver functions
 *****************************************************************************/


static int generic_startup (struct usb_serial *serial)
{
	struct cypress_private *priv;

	dbg("%s - port %d", __FUNCTION__, serial->port[0]->number);

	priv = kmalloc(sizeof (struct cypress_private), GFP_KERNEL);
	if (!priv)
		return -ENOMEM;

	memset(priv, 0x00, sizeof (struct cypress_private));
	spin_lock_init(&priv->lock);
	priv->buf = cypress_buf_alloc(CYPRESS_BUF_SIZE);
	if (priv->buf == NULL) {
		kfree(priv);
		return -ENOMEM;
	}
	init_waitqueue_head(&priv->delta_msr_wait);
	
	usb_reset_configuration (serial->dev);
	
	interval = 1;
	priv->cmd_ctrl = 0;
	priv->line_control = 0;
	priv->termios_initialized = 0;
	priv->rx_flags = 0;
	priv->cbr_mask = B300;
	usb_set_serial_port_data(serial->port[0], priv);
	
	return 0;
}


static int cypress_earthmate_startup (struct usb_serial *serial)
{
	struct cypress_private *priv;

	dbg("%s", __FUNCTION__);

	if (generic_startup(serial)) {
		dbg("%s - Failed setting up port %d", __FUNCTION__,
				serial->port[0]->number);
		return 1;
	}

	priv = usb_get_serial_port_data(serial->port[0]);
	priv->chiptype = CT_EARTHMATE;

	return 0;
} /* cypress_earthmate_startup */


static int cypress_hidcom_startup (struct usb_serial *serial)
{
	struct cypress_private *priv;

	dbg("%s", __FUNCTION__);

	if (generic_startup(serial)) {
		dbg("%s - Failed setting up port %d", __FUNCTION__,
				serial->port[0]->number);
		return 1;
	}

	priv = usb_get_serial_port_data(serial->port[0]);
	priv->chiptype = CT_CYPHIDCOM;
	
	return 0;
} /* cypress_hidcom_startup */


static void cypress_shutdown (struct usb_serial *serial)
{
	struct cypress_private *priv;

	dbg ("%s - port %d", __FUNCTION__, serial->port[0]->number);

	/* all open ports are closed at this point */

	priv = usb_get_serial_port_data(serial->port[0]);

	if (priv) {
		cypress_buf_free(priv->buf);
		kfree(priv);
		usb_set_serial_port_data(serial->port[0], NULL);
	}
}


static int cypress_open (struct usb_serial_port *port, struct file *filp)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	struct usb_serial *serial = port->serial;
	unsigned long flags;
	int result = 0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	/* clear halts before open */
	usb_clear_halt(serial->dev, 0x81);
	usb_clear_halt(serial->dev, 0x02);

	spin_lock_irqsave(&priv->lock, flags);
	/* reset read/write statistics */
	priv->bytes_in = 0;
	priv->bytes_out = 0;
	priv->cmd_count = 0;
	priv->rx_flags = 0;
	spin_unlock_irqrestore(&priv->lock, flags);

	/* setting to zero could cause data loss */
	port->tty->low_latency = 1;

	/* raise both lines and set termios */
	spin_lock_irqsave(&priv->lock, flags);
	priv->line_control = CONTROL_DTR | CONTROL_RTS;
	priv->cmd_ctrl = 1;
	spin_unlock_irqrestore(&priv->lock, flags);
	result = cypress_write(port, NULL, 0);

	if (result) {
		dev_err(&port->dev, "%s - failed setting the control lines - error %d\n", __FUNCTION__, result);
		return result;
	} else
		dbg("%s - success setting the control lines", __FUNCTION__);	

	cypress_set_termios(port, &priv->tmp_termios);

	/* setup the port and start reading from the device */
	if(!port->interrupt_in_urb){
		err("%s - interrupt_in_urb is empty!", __FUNCTION__);
		return(-1);
	}

	usb_fill_int_urb(port->interrupt_in_urb, serial->dev,
		usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress),
		port->interrupt_in_urb->transfer_buffer, port->interrupt_in_urb->transfer_buffer_length,
		cypress_read_int_callback, port, interval);
	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);

	if (result){
		dev_err(&port->dev, "%s - failed submitting read urb, error %d\n", __FUNCTION__, result);
	}

	return result;
} /* cypress_open */


static void cypress_close(struct usb_serial_port *port, struct file * filp)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	unsigned int c_cflag;
	unsigned long flags;
	int bps;
	long timeout;
	wait_queue_t wait;

	dbg("%s - port %d", __FUNCTION__, port->number);

	/* wait for data to drain from buffer */
	spin_lock_irqsave(&priv->lock, flags);
	timeout = CYPRESS_CLOSING_WAIT;
	init_waitqueue_entry(&wait, current);
	add_wait_queue(&port->tty->write_wait, &wait);
	for (;;) {
		set_current_state(TASK_INTERRUPTIBLE);
		if (cypress_buf_data_avail(priv->buf) == 0
		|| timeout == 0 || signal_pending(current)
		|| !usb_get_intfdata(port->serial->interface))
			break;
		spin_unlock_irqrestore(&priv->lock, flags);
		timeout = schedule_timeout(timeout);
		spin_lock_irqsave(&priv->lock, flags);
	}
	set_current_state(TASK_RUNNING);
	remove_wait_queue(&port->tty->write_wait, &wait);
	/* clear out any remaining data in the buffer */
	cypress_buf_clear(priv->buf);
	spin_unlock_irqrestore(&priv->lock, flags);
	
	/* wait for characters to drain from device */
	bps = tty_get_baud_rate(port->tty);
	if (bps > 1200)
		timeout = max((HZ*2560)/bps,HZ/10);
	else
		timeout = 2*HZ;
	schedule_timeout_interruptible(timeout);

	dbg("%s - stopping urbs", __FUNCTION__);
	usb_kill_urb (port->interrupt_in_urb);
	usb_kill_urb (port->interrupt_out_urb);

	if (port->tty) {
		c_cflag = port->tty->termios->c_cflag;
		if (c_cflag & HUPCL) {
			/* drop dtr and rts */
			priv = usb_get_serial_port_data(port);
			spin_lock_irqsave(&priv->lock, flags);
			priv->line_control = 0;
			priv->cmd_ctrl = 1;
			spin_unlock_irqrestore(&priv->lock, flags);
			cypress_write(port, NULL, 0);
		}
	}

	if (stats)
		dev_info (&port->dev, "Statistics: %d Bytes In | %d Bytes Out | %d Commands Issued\n",
		          priv->bytes_in, priv->bytes_out, priv->cmd_count);
} /* cypress_close */


static int cypress_write(struct usb_serial_port *port, const unsigned char *buf, int count)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	
	dbg("%s - port %d, %d bytes", __FUNCTION__, port->number, count);

	/* line control commands, which need to be executed immediately,
	   are not put into the buffer for obvious reasons.
	 */
	if (priv->cmd_ctrl) {
		count = 0;
		goto finish;
	}
	
	if (!count)
		return count;
	
	spin_lock_irqsave(&priv->lock, flags);
	count = cypress_buf_put(priv->buf, buf, count);
	spin_unlock_irqrestore(&priv->lock, flags);

finish:
	cypress_send(port);

	return count;
} /* cypress_write */


static void cypress_send(struct usb_serial_port *port)
{
	int count = 0, result, offset, actual_size;
	struct cypress_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	
	dbg("%s - port %d", __FUNCTION__, port->number);
	dbg("%s - interrupt out size is %d", __FUNCTION__, port->interrupt_out_size);
	
	spin_lock_irqsave(&priv->lock, flags);
	if (priv->write_urb_in_use) {
		dbg("%s - can't write, urb in use", __FUNCTION__);
		spin_unlock_irqrestore(&priv->lock, flags);
		return;
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	/* clear buffer */
	memset(port->interrupt_out_urb->transfer_buffer, 0, port->interrupt_out_size);

	spin_lock_irqsave(&priv->lock, flags);
	switch (port->interrupt_out_size) {
		case 32:
			/* this is for the CY7C64013... */
			offset = 2;
			port->interrupt_out_buffer[0] = priv->line_control;
			break;
		case 8:
			/* this is for the CY7C63743... */
			offset = 1;
			port->interrupt_out_buffer[0] = priv->line_control;
			break;
		default:
			dbg("%s - wrong packet size", __FUNCTION__);
			spin_unlock_irqrestore(&priv->lock, flags);
			return;
	}

	if (priv->line_control & CONTROL_RESET)
		priv->line_control &= ~CONTROL_RESET;

	if (priv->cmd_ctrl) {
		priv->cmd_count++;
		dbg("%s - line control command being issued", __FUNCTION__);
		spin_unlock_irqrestore(&priv->lock, flags);
		goto send;
	} else
		spin_unlock_irqrestore(&priv->lock, flags);

	count = cypress_buf_get(priv->buf, &port->interrupt_out_buffer[offset],
				port->interrupt_out_size-offset);

	if (count == 0) {
		return;
	}

	switch (port->interrupt_out_size) {
		case 32:
			port->interrupt_out_buffer[1] = count;
			break;
		case 8:
			port->interrupt_out_buffer[0] |= count;
	}

	dbg("%s - count is %d", __FUNCTION__, count);

send:
	spin_lock_irqsave(&priv->lock, flags);
	priv->write_urb_in_use = 1;
	spin_unlock_irqrestore(&priv->lock, flags);

	if (priv->cmd_ctrl)
		actual_size = 1;
	else
		actual_size = count + (port->interrupt_out_size == 32 ? 2 : 1);
	
	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, port->interrupt_out_size,
			      port->interrupt_out_urb->transfer_buffer);

	port->interrupt_out_urb->transfer_buffer_length = actual_size;
	port->interrupt_out_urb->dev = port->serial->dev;
	port->interrupt_out_urb->interval = interval;
	result = usb_submit_urb (port->interrupt_out_urb, GFP_ATOMIC);
	if (result) {
		dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__,
			result);
		priv->write_urb_in_use = 0;
	}

	spin_lock_irqsave(&priv->lock, flags);
	if (priv->cmd_ctrl) {
		priv->cmd_ctrl = 0;
	}
	priv->bytes_out += count; /* do not count the line control and size bytes */
	spin_unlock_irqrestore(&priv->lock, flags);

	schedule_work(&port->work);
} /* cypress_send */


/* returns how much space is available in the soft buffer */
static int cypress_write_room(struct usb_serial_port *port)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	int room = 0;
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->lock, flags);
	room = cypress_buf_space_avail(priv->buf);
	spin_unlock_irqrestore(&priv->lock, flags);

	dbg("%s - returns %d", __FUNCTION__, room);
	return room;
}


static int cypress_tiocmget (struct usb_serial_port *port, struct file *file)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	__u8 status, control;
	unsigned int result = 0;
	unsigned long flags;
	
	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->lock, flags);
	control = priv->line_control;
	status = priv->current_status;
	spin_unlock_irqrestore(&priv->lock, flags);

	result = ((control & CONTROL_DTR)        ? TIOCM_DTR : 0)
		| ((control & CONTROL_RTS)       ? TIOCM_RTS : 0)
		| ((status & UART_CTS)        ? TIOCM_CTS : 0)
		| ((status & UART_DSR)        ? TIOCM_DSR : 0)
		| ((status & UART_RI)         ? TIOCM_RI  : 0)
		| ((status & UART_CD)         ? TIOCM_CD  : 0);

	dbg("%s - result = %x", __FUNCTION__, result);

	return result;
}


static int cypress_tiocmset (struct usb_serial_port *port, struct file *file,
			       unsigned int set, unsigned int clear)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	
	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->lock, flags);
	if (set & TIOCM_RTS)
		priv->line_control |= CONTROL_RTS;
	if (set & TIOCM_DTR)
		priv->line_control |= CONTROL_DTR;
	if (clear & TIOCM_RTS)
		priv->line_control &= ~CONTROL_RTS;
	if (clear & TIOCM_DTR)
		priv->line_control &= ~CONTROL_DTR;
	spin_unlock_irqrestore(&priv->lock, flags);

	priv->cmd_ctrl = 1;
	return cypress_write(port, NULL, 0);
}


static int cypress_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);

	dbg("%s - port %d, cmd 0x%.4x", __FUNCTION__, port->number, cmd);

	switch (cmd) {
		case TIOCGSERIAL:
			if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
				return -EFAULT;
			}
			return (0);
			break;
		case TIOCSSERIAL:
			if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
				return -EFAULT;
			}
			/* here we need to call cypress_set_termios to invoke the new settings */
			cypress_set_termios(port, &priv->tmp_termios);
			return (0);
			break;
		/* these are called when setting baud rate from gpsd */
		case TCGETS:
			if (copy_to_user((void __user *)arg, port->tty->termios, sizeof(struct termios))) {
				return -EFAULT;
			}
			return (0);
			break;
		case TCSETS:
			if (copy_from_user(port->tty->termios, (void __user *)arg, sizeof(struct termios))) {
				return -EFAULT;
			}
			/* here we need to call cypress_set_termios to invoke the new settings */
			cypress_set_termios(port, &priv->tmp_termios);
			return (0);
			break;
		/* This code comes from drivers/char/serial.c and ftdi_sio.c */
		case TIOCMIWAIT:
			while (priv != NULL) {
				interruptible_sleep_on(&priv->delta_msr_wait);
				/* see if a signal did it */
				if (signal_pending(current))
					return -ERESTARTSYS;
				else {
					char diff = priv->diff_status;

					if (diff == 0) {
						return -EIO; /* no change => error */
					}
					
					/* consume all events */
					priv->diff_status = 0;

					/* return 0 if caller wanted to know about these bits */
					if ( ((arg & TIOCM_RNG) && (diff & UART_RI)) ||
					     ((arg & TIOCM_DSR) && (diff & UART_DSR)) ||
					     ((arg & TIOCM_CD) && (diff & UART_CD)) ||
					     ((arg & TIOCM_CTS) && (diff & UART_CTS)) ) {
						return 0;
					}
					/* otherwise caller can't care less about what happened,
					 * and so we continue to wait for more events.
					 */
				}
			}
			return 0;
			break;
		default:
			break;
	}

	dbg("%s - arg not supported - it was 0x%04x - check include/asm/ioctls.h", __FUNCTION__, cmd);

	return -ENOIOCTLCMD;
} /* cypress_ioctl */


static void cypress_set_termios (struct usb_serial_port *port,
		struct termios *old_termios)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	struct tty_struct *tty;
	int data_bits, stop_bits, parity_type, parity_enable;
	unsigned cflag, iflag, baud_mask;
	unsigned long flags;
	__u8 oldlines;
	int linechange = 0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	tty = port->tty;
	if ((!tty) || (!tty->termios)) {
		dbg("%s - no tty structures", __FUNCTION__);
		return;
	}

	spin_lock_irqsave(&priv->lock, flags);
	if (!priv->termios_initialized) {
		if (priv->chiptype == CT_EARTHMATE) {
			*(tty->termios) = tty_std_termios;
			tty->termios->c_cflag = B4800 | CS8 | CREAD | HUPCL |
				CLOCAL;
		} else if (priv->chiptype == CT_CYPHIDCOM) {
			*(tty->termios) = tty_std_termios;
			tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL |
				CLOCAL;
		}
		priv->termios_initialized = 1;
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	cflag = tty->termios->c_cflag;
	iflag = tty->termios->c_iflag;

	/* check if there are new settings */
	if (old_termios) {
		if ((cflag != old_termios->c_cflag) ||
			(RELEVANT_IFLAG(iflag) !=
			 RELEVANT_IFLAG(old_termios->c_iflag))) {
			dbg("%s - attempting to set new termios settings",
					__FUNCTION__);
			/* should make a copy of this in case something goes
			 * wrong in the function, we can restore it */
			spin_lock_irqsave(&priv->lock, flags);
			priv->tmp_termios = *(tty->termios);
			spin_unlock_irqrestore(&priv->lock, flags);
		} else {
			dbg("%s - nothing to do, exiting", __FUNCTION__);
			return;
		}
	} else
		return;

	/* set number of data bits, parity, stop bits */
	/* when parity is disabled the parity type bit is ignored */

	/* 1 means 2 stop bits, 0 means 1 stop bit */
	stop_bits = cflag & CSTOPB ? 1 : 0;

	if (cflag & PARENB) {
		parity_enable = 1;
		/* 1 means odd parity, 0 means even parity */
		parity_type = cflag & PARODD ? 1 : 0;
	} else
		parity_enable = parity_type = 0;

	if (cflag & CSIZE) {
		switch (cflag & CSIZE) {
			case CS5:
				data_bits = 0;
				break;
			case CS6:
				data_bits = 1;
				break;
			case CS7:
				data_bits = 2;
				break;
			case CS8:
				data_bits = 3;
				break;
			default:
				err("%s - CSIZE was set, but not CS5-CS8",
						__FUNCTION__);
				data_bits = 3;
		}
	} else
		data_bits = 3;

	spin_lock_irqsave(&priv->lock, flags);
	oldlines = priv->line_control;
	if ((cflag & CBAUD) == B0) {
		/* drop dtr and rts */
		dbg("%s - dropping the lines, baud rate 0bps", __FUNCTION__);
		baud_mask = B0;
		priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
	} else {
		baud_mask = (cflag & CBAUD);
		switch(baud_mask) {
			case B300:
				dbg("%s - setting baud 300bps", __FUNCTION__);
				break;
			case B600:
				dbg("%s - setting baud 600bps", __FUNCTION__);
				break;
			case B1200:
				dbg("%s - setting baud 1200bps", __FUNCTION__);
				break;
			case B2400:
				dbg("%s - setting baud 2400bps", __FUNCTION__);
				break;
			case B4800:
				dbg("%s - setting baud 4800bps", __FUNCTION__);
				break;
			case B9600:
				dbg("%s - setting baud 9600bps", __FUNCTION__);
				break;
			case B19200:
				dbg("%s - setting baud 19200bps", __FUNCTION__);
				break;
			case B38400:
				dbg("%s - setting baud 38400bps", __FUNCTION__);
				break;
			case B57600:
				dbg("%s - setting baud 57600bps", __FUNCTION__);
				break;
			case B115200:
				dbg("%s - setting baud 115200bps", __FUNCTION__);
				break;
			default:
				dbg("%s - unknown masked baud rate", __FUNCTION__);
		}
		priv->line_control = (CONTROL_DTR | CONTROL_RTS);
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	dbg("%s - sending %d stop_bits, %d parity_enable, %d parity_type, "
			"%d data_bits (+5)", __FUNCTION__, stop_bits,
			parity_enable, parity_type, data_bits);

	cypress_serial_control(port, baud_mask, data_bits, stop_bits,
			parity_enable, parity_type, 0, CYPRESS_SET_CONFIG);

	/* we perform a CYPRESS_GET_CONFIG so that the current settings are
	 * filled into the private structure this should confirm that all is
	 * working if it returns what we just set */
	cypress_serial_control(port, 0, 0, 0, 0, 0, 0, CYPRESS_GET_CONFIG);

	/* Here we can define custom tty settings for devices; the main tty
	 * termios flag base comes from empeg.c */

	spin_lock_irqsave(&priv->lock, flags);
	if ( (priv->chiptype == CT_EARTHMATE) && (priv->baud_rate == 4800) ) {
		dbg("Using custom termios settings for a baud rate of "
				"4800bps.");
		/* define custom termios settings for NMEA protocol */

		tty->termios->c_iflag /* input modes - */
			&= ~(IGNBRK  /* disable ignore break */
			| BRKINT     /* disable break causes interrupt */
			| PARMRK     /* disable mark parity errors */
			| ISTRIP     /* disable clear high bit of input char */
			| INLCR      /* disable translate NL to CR */
			| IGNCR      /* disable ignore CR */
			| ICRNL      /* disable translate CR to NL */
			| IXON);     /* disable enable XON/XOFF flow control */

		tty->termios->c_oflag /* output modes */
			&= ~OPOST;    /* disable postprocess output char */

		tty->termios->c_lflag /* line discipline modes */
			&= ~(ECHO     /* disable echo input characters */
			| ECHONL      /* disable echo new line */
			| ICANON      /* disable erase, kill, werase, and rprnt
					 special characters */
			| ISIG        /* disable interrupt, quit, and suspend
					 special characters */
			| IEXTEN);    /* disable non-POSIX special characters */
	} /* CT_CYPHIDCOM: Application should handle this for device */

	linechange = (priv->line_control != oldlines);
	spin_unlock_irqrestore(&priv->lock, flags);

	/* if necessary, set lines */
	if (linechange) {
		priv->cmd_ctrl = 1;
		cypress_write(port, NULL, 0);
	}
} /* cypress_set_termios */


/* returns amount of data still left in soft buffer */
static int cypress_chars_in_buffer(struct usb_serial_port *port)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	int chars = 0;
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);
	
	spin_lock_irqsave(&priv->lock, flags);
	chars = cypress_buf_data_avail(priv->buf);
	spin_unlock_irqrestore(&priv->lock, flags);

	dbg("%s - returns %d", __FUNCTION__, chars);
	return chars;
}


static void cypress_throttle (struct usb_serial_port *port)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->lock, flags);
	priv->rx_flags = THROTTLED;
	spin_unlock_irqrestore(&priv->lock, flags);
}


static void cypress_unthrottle (struct usb_serial_port *port)
{
	struct cypress_private *priv = usb_get_serial_port_data(port);
	int actually_throttled, result;
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	spin_lock_irqsave(&priv->lock, flags);
	actually_throttled = priv->rx_flags & ACTUALLY_THROTTLED;
	priv->rx_flags = 0;
	spin_unlock_irqrestore(&priv->lock, flags);

	if (actually_throttled) {
		port->interrupt_in_urb->dev = port->serial->dev;

		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
		if (result)
			dev_err(&port->dev, "%s - failed submitting read urb, "
					"error %d\n", __FUNCTION__, result);
	}
}


static void cypress_read_int_callback(struct urb *urb, struct pt_regs *regs)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
	struct cypress_private *priv = usb_get_serial_port_data(port);
	struct tty_struct *tty;
	unsigned char *data = urb->transfer_buffer;
	unsigned long flags;
	char tty_flag = TTY_NORMAL;
	int havedata = 0;
	int bytes = 0;
	int result;
	int i = 0;

	dbg("%s - port %d", __FUNCTION__, port->number);

	if (urb->status) {
		dbg("%s - nonzero read status received: %d", __FUNCTION__,
				urb->status);
		return;
	}

	spin_lock_irqsave(&priv->lock, flags);
	if (priv->rx_flags & THROTTLED) {
		dbg("%s - now throttling", __FUNCTION__);
		priv->rx_flags |= ACTUALLY_THROTTLED;
		spin_unlock_irqrestore(&priv->lock, flags);
		return;
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	tty = port->tty;
	if (!tty) {
		dbg("%s - bad tty pointer - exiting", __FUNCTION__);
		return;
	}

	spin_lock_irqsave(&priv->lock, flags);
	switch(urb->actual_length) {
		case 32:
			/* This is for the CY7C64013... */
			priv->current_status = data[0] & 0xF8;
			bytes = data[1] + 2;
			i = 2;
			if (bytes > 2)
				havedata = 1;
			break;
		case 8:
			/* This is for the CY7C63743... */
			priv->current_status = data[0] & 0xF8;
			bytes = (data[0] & 0x07) + 1;
			i = 1;
			if (bytes > 1)
				havedata = 1;
			break;
		default:
			dbg("%s - wrong packet size - received %d bytes",
					__FUNCTION__, urb->actual_length);
			spin_unlock_irqrestore(&priv->lock, flags);
			goto continue_read;
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	usb_serial_debug_data (debug, &port->dev, __FUNCTION__,
			urb->actual_length, data);

	spin_lock_irqsave(&priv->lock, flags);
	/* check to see if status has changed */
	if (priv != NULL) {
		if (priv->current_status != priv->prev_status) {
			priv->diff_status |= priv->current_status ^
				priv->prev_status;
			wake_up_interruptible(&priv->delta_msr_wait);
			priv->prev_status = priv->current_status;
		}
	}
	spin_unlock_irqrestore(&priv->lock, flags);

	/* hangup, as defined in acm.c... this might be a bad place for it
	 * though */
	if (tty && !(tty->termios->c_cflag & CLOCAL) &&
			!(priv->current_status & UART_CD)) {
		dbg("%s - calling hangup", __FUNCTION__);
		tty_hangup(tty);
		goto continue_read;
	}

	/* There is one error bit... I'm assuming it is a parity error
	 * indicator as the generic firmware will set this bit to 1 if a
	 * parity error occurs.
	 * I can not find reference to any other error events. */
	spin_lock_irqsave(&priv->lock, flags);
	if (priv->current_status & CYP_ERROR) {
		spin_unlock_irqrestore(&priv->lock, flags);
		tty_flag = TTY_PARITY;
		dbg("%s - Parity Error detected", __FUNCTION__);
	} else
		spin_unlock_irqrestore(&priv->lock, flags);

	/* process read if there is data other than line status */
	if (tty && (bytes > i)) {
		for (; i < bytes ; ++i) {
			dbg("pushing byte number %d - %d - %c", i, data[i],
					data[i]);
			if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
				tty_flip_buffer_push(tty);
			}
			tty_insert_flip_char(tty, data[i], tty_flag);
		}
		tty_flip_buffer_push(port->tty);
	}

	spin_lock_irqsave(&priv->lock, flags);
	/* control and status byte(s) are also counted */
	priv->bytes_in += bytes;
	spin_unlock_irqrestore(&priv->lock, flags);

continue_read:

	/* Continue trying to always read... unless the port has closed. */

	if (port->open_count > 0) {
		usb_fill_int_urb(port->interrupt_in_urb, port->serial->dev,
				usb_rcvintpipe(port->serial->dev,
					port->interrupt_in_endpointAddress),
				port->interrupt_in_urb->transfer_buffer,
				port->interrupt_in_urb->transfer_buffer_length,
				cypress_read_int_callback, port, interval);
		result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
		if (result)
			dev_err(&urb->dev->dev, "%s - failed resubmitting "
					"read urb, error %d\n", __FUNCTION__,
					result);
	}

	return;
} /* cypress_read_int_callback */


static void cypress_write_int_callback(struct urb *urb, struct pt_regs *regs)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
	struct cypress_private *priv = usb_get_serial_port_data(port);
	int result;

	dbg("%s - port %d", __FUNCTION__, port->number);
	
	switch (urb->status) {
		case 0:
			/* success */
			break;
		case -ECONNRESET:
		case -ENOENT:
		case -ESHUTDOWN:
			/* this urb is terminated, clean up */
			dbg("%s - urb shutting down with status: %d", __FUNCTION__, urb->status);
			priv->write_urb_in_use = 0;
			return;
		case -EPIPE: /* no break needed */
			usb_clear_halt(port->serial->dev, 0x02);
		default:
			/* error in the urb, so we have to resubmit it */
			dbg("%s - Overflow in write", __FUNCTION__);
			dbg("%s - nonzero write bulk status received: %d", __FUNCTION__, urb->status);
			port->interrupt_out_urb->transfer_buffer_length = 1;
			port->interrupt_out_urb->dev = port->serial->dev;
			result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC);
			if (result)
				dev_err(&urb->dev->dev, "%s - failed resubmitting write urb, error %d\n",
					__FUNCTION__, result);
			else
				return;
	}
	
	priv->write_urb_in_use = 0;
	
	/* send any buffered data */
	cypress_send(port);
}


/*****************************************************************************
 * Write buffer functions - buffering code from pl2303 used
 *****************************************************************************/

/*
 * cypress_buf_alloc
 *
 * Allocate a circular buffer and all associated memory.
 */

static struct cypress_buf *cypress_buf_alloc(unsigned int size)
{

	struct cypress_buf *cb;


	if (size == 0)
		return NULL;

	cb = (struct cypress_buf *)kmalloc(sizeof(struct cypress_buf), GFP_KERNEL);
	if (cb == NULL)
		return NULL;

	cb->buf_buf = kmalloc(size, GFP_KERNEL);
	if (cb->buf_buf == NULL) {
		kfree(cb);
		return NULL;
	}

	cb->buf_size = size;
	cb->buf_get = cb->buf_put = cb->buf_buf;

	return cb;

}


/*
 * cypress_buf_free
 *
 * Free the buffer and all associated memory.
 */

static void cypress_buf_free(struct cypress_buf *cb)
{
	if (cb) {
		kfree(cb->buf_buf);
		kfree(cb);
	}
}


/*
 * cypress_buf_clear
 *
 * Clear out all data in the circular buffer.
 */

static void cypress_buf_clear(struct cypress_buf *cb)
{
	if (cb != NULL)
		cb->buf_get = cb->buf_put;
		/* equivalent to a get of all data available */
}


/*
 * cypress_buf_data_avail
 *
 * Return the number of bytes of data available in the circular
 * buffer.
 */

static unsigned int cypress_buf_data_avail(struct cypress_buf *cb)
{
	if (cb != NULL)
		return ((cb->buf_size + cb->buf_put - cb->buf_get) % cb->buf_size);
	else
		return 0;
}


/*
 * cypress_buf_space_avail
 *
 * Return the number of bytes of space available in the circular
 * buffer.
 */

static unsigned int cypress_buf_space_avail(struct cypress_buf *cb)
{
	if (cb != NULL)
		return ((cb->buf_size + cb->buf_get - cb->buf_put - 1) % cb->buf_size);
	else
		return 0;
}


/*
 * cypress_buf_put
 *
 * Copy data data from a user buffer and put it into the circular buffer.
 * Restrict to the amount of space available.
 *
 * Return the number of bytes copied.
 */

static unsigned int cypress_buf_put(struct cypress_buf *cb, const char *buf,
	unsigned int count)
{

	unsigned int len;


	if (cb == NULL)
		return 0;

	len  = cypress_buf_space_avail(cb);
	if (count > len)
		count = len;

	if (count == 0)
		return 0;

	len = cb->buf_buf + cb->buf_size - cb->buf_put;
	if (count > len) {
		memcpy(cb->buf_put, buf, len);
		memcpy(cb->buf_buf, buf+len, count - len);
		cb->buf_put = cb->buf_buf + count - len;
	} else {
		memcpy(cb->buf_put, buf, count);
		if (count < len)
			cb->buf_put += count;
		else /* count == len */
			cb->buf_put = cb->buf_buf;
	}

	return count;

}


/*
 * cypress_buf_get
 *
 * Get data from the circular buffer and copy to the given buffer.
 * Restrict to the amount of data available.
 *
 * Return the number of bytes copied.
 */

static unsigned int cypress_buf_get(struct cypress_buf *cb, char *buf,
	unsigned int count)
{

	unsigned int len;


	if (cb == NULL)
		return 0;

	len = cypress_buf_data_avail(cb);
	if (count > len)
		count = len;

	if (count == 0)
		return 0;

	len = cb->buf_buf + cb->buf_size - cb->buf_get;
	if (count > len) {
		memcpy(buf, cb->buf_get, len);
		memcpy(buf+len, cb->buf_buf, count - len);
		cb->buf_get = cb->buf_buf + count - len;
	} else {
		memcpy(buf, cb->buf_get, count);
		if (count < len)
			cb->buf_get += count;
		else /* count == len */
			cb->buf_get = cb->buf_buf;
	}

	return count;

}

/*****************************************************************************
 * Module functions
 *****************************************************************************/

static int __init cypress_init(void)
{
	int retval;
	
	dbg("%s", __FUNCTION__);
	
	retval = usb_serial_register(&cypress_earthmate_device);
	if (retval)
		goto failed_em_register;
	retval = usb_serial_register(&cypress_hidcom_device);
	if (retval)
		goto failed_hidcom_register;
	retval = usb_register(&cypress_driver);
	if (retval)
		goto failed_usb_register;

	info(DRIVER_DESC " " DRIVER_VERSION);
	return 0;
failed_usb_register:
	usb_deregister(&cypress_driver);
failed_hidcom_register:
	usb_serial_deregister(&cypress_hidcom_device);
failed_em_register:
	usb_serial_deregister(&cypress_earthmate_device);

	return retval;
}


static void __exit cypress_exit (void)
{
	dbg("%s", __FUNCTION__);

	usb_deregister (&cypress_driver);
	usb_serial_deregister (&cypress_earthmate_device);
	usb_serial_deregister (&cypress_hidcom_device);
}


module_init(cypress_init);
module_exit(cypress_exit);

MODULE_AUTHOR( DRIVER_AUTHOR );
MODULE_DESCRIPTION( DRIVER_DESC );
MODULE_VERSION( DRIVER_VERSION );
MODULE_LICENSE("GPL");

module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
module_param(stats, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(stats, "Enable statistics or not");
module_param(interval, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(interval, "Overrides interrupt interval");